Formulation of fast disintegrating tablets of ternary solid dispersions consisting of TPGS 1000 and HPMC 2910 or PVPVA 64 to improve the dissolution of the anti-HIV drug UC 781

Solid dispersion formulations made up of d-alpha-tocopheryl polyethylene glycol succinate 1000 (TPGS 1000) and polyvinyl pyrrolidone co-vinyl acetate 64 (PVPVA 64) or hydroxy propyl methyl cellulose 2910 (HPMC 2910) were developed in order to improve the dissolution of UC 781. UC 781 dissolution rate was markedly improved as compared to the physical mixtures and the pure drug, attaining maximum drug releases of up to 100% after only 5 min in the case of TPGS 1000-UC 781-PVPVA 64 solid dispersions and 30 min in TPGS 1000-UC 781-HPMC 2910. The increased UC 781 dissolution rate could be maintained when formulating UC 781 in PVPVA 64 tablets. The latter disintegrated in only 4 min, reaching drug releases of up to 90% (w/w). In addition, as opposed to the corresponding solid dispersions, no decrease in drug release occurred upon dissolution of PVPVA 64 tablets when the pH was increased to 6.8. Contrary to the PVPVA 64 tablet formulations, HPMC 2910 tablets showed a slow dissolution process due to the gelling nature of the polymer. The drug was slowly released as HPMC 2910 dissolved in the medium, however also in this case 90% (w/w) of the drug was dissolved after 4 h. Both polymers formed compatible blends in combination with the drug. Thermal analysis of the ternary mixtures revealed eutectic behavior exhibiting an extremely fine dispersion of the drug in the carrier. This was confirmed by the fact that no drug crystals could be detected using X-ray diffraction (XRD). As opposed to the physical mixtures, PVPVA 64 and HPMC 2910 solid dispersions did not contain any isolated polymer-rich phases, hence showed improved homogeneity. Amorphous TPGS 1000 clusters occurred in PVPVA 64 and HPMC 2910 formulations upon addition of at least 10% (w/w) UC 781, showing extremely low glass transition temperatures depending of the thermal history of the samples.     

Free flowing solid dispersions of the anti-HIV drug UC 781 with Poloxamer 407 and a maximum amount of TPGS 1000: Investigating the relationship between physicochemical characteristics and dissolution behaviour

Solid dispersions and physical mixtures made up of the poorly water-soluble drug UC 781, a polymer and a surfactant were prepared to contribute to the understanding of the relationship between physicochemical characteristics and dissolution behaviour. In addition, to facilitate downstream processing while still favouring drug dissolution to a maximum extent, formulation conditions were investigated to obtain a free flowing powder which contains a maximum amount of surfactant. Poloxamer 407, a polyethylene-polypropylene glycol block copolymer, was selected as a suitable polymer based on UC 781 supersaturation results. d-Alpha-tocopheryl polyethyleneglycol succinate 1000 (TPGS 1000) was preferred as a surfactant since it increased UC 781 dissolution when formulated in a self-micro emulsifying drug delivery system (SMEDDS), as compared to TPGS 400, TPGS 4000 and TPGS 6000. Based on flow properties, a TPGS 1000/Poloxamer 407 ratio of 80/20 was used to prepare solid dispersions by spray drying. Pure drugs, physical mixtures and solid dispersions were characterized by differential scanning calorimetry and X-ray powder diffraction. Eutectic phase behaviour was obtained in which the relative distribution of the polyethylene glycol folding was dependent on UC 781 concentration. Drug release was markedly increased when formulated as a solid dispersion with Poloxamer 407 and TPGS 1000. Formulation of solid dispersions did however not further improve the drug dissolution rate compared to that of physical mixtures. Nonetheless, variability of dissolution results was considerably reduced upon solid dispersion formulation.     

Physicochemical characterization of solid dispersion of furosemide with TPGS

The D-alpha-tocopheryl polyethylene glycol 1000 succinate (TPGS) was used to increase the aqueous solubility and dissolution rate of furosemide. The solid dispersion of furosemide with TPGS was prepared by solvent method using methanol. The aqueous solubility and the dissolution rate of furosemide were rapid and markedly enhanced from the 1:2 furosemide-TPGS solid dispersion. The X-ray diffractometry showed that pure furosemide and furosemide contained within the physical mixture were crystalline in nature, whereas furosemide in the solid dispersion was not in crystalline form. The infrared spectroscopic analysis showed that an interaction, in the solid dispersion, such as an association between the functional groups of furosemide and TPGS might occur in the molecular level. The infrared spectroscopy and differential thermal analysis showed the physicochemical modifications of the furosemide from the solid dispersion. The solid dispersion technique with TPGS provides a promising way to increase the solubility and dissolution rate of poorly soluble drugs.     

Formulation and characterization of ternary solid dispersions made up of Itraconazole and two excipients, TPGS 1000 and PVPVA 64, that were selected based on a supersaturation screening study

Both d--tocopheryl polyethylene glycol 1000 (TPGS 1000) and polyvidone-vinylacetate 64 (PVPVA 64) provided an increase in the degree of supersaturation and stability of supersaturated Itraconazole solutions, compared to a blanc without excipient. Therefore, both components were combined as carrier in order to make ternary solid dispersions of Itraconazole by spray drying. This way, TPGS 1000 could be incorporated into a powder. Dissolution experiments on the ternary solid dispersions revealed that during the first hour the release was much higher than for the binary Itraconazole/PVPVA 64 solid dispersions. For some compositions a release of more than 80% was reached after 10 min. However, after the first hour the drug started to precipitate. The ternary solid dispersions were all XRD amorphous, but MDSC revealed the coexistence of multiple amorphous phases and a crystalline Itraconazole phase, depending on the composition. Therefore the burst effect during the first hour can be ascribed to an accelerated dissolution of the amorphous Itraconazole fraction in the presence of TPGS 1000. The precipitation after 1 h, however, is probably due to the combination of the surfactant properties of TPGS and the small crystalline Itraconazole fraction.     

Clinical study of solid dispersions of itraconazole prepared by hot-stage extrusion.

The aim of this study was to investigate the performance of three new solid dispersion formulations of itraconazole in human volunteers in comparison with Sporanox, the marketed form. Solid dispersions made up of itraconazole (40%, w/w) and HPMC 2910, Eudragit E100 or a mixture of Eudragit E100-PVPVA64 were manufactured by hot-stage extrusion and filled in gelatin capsules. The formulations were tested in eight human volunteers in a double blind, single dose, and cross-over study. Concentrations of the drug and its metabolite hydroxyitraconazole in the plasma were determined using HPLC. The in vivo performance was evaluated by comparing the mean area under the plasma concentration-time curves (AUC), the mean maximum plasma concentration (C(max)), and the mean time to reach C(max) (T(max)). The mean bioavailability of itraconazole was comparable after administration of the HPMC solid dispersion, compared to Sporanox, while it was lower after administration of the Eudragit E100 or Eudragit E100-PVPVA64 dispersions. Due to high variability, a significant decrease in AUC and C(max) was only observed for the Eudragit E100-PVPVA formulation. Although the solid dispersions showed different in vitro dissolution behaviour, T(max) values were comparable. The same observations with respect to AUC, C(max) and T(max) could be made for hydroxyitraconazole. The present results indicate that hot-stage extrusion can be considered as a valuable alternative for manufacturing solid dispersions of itraconazole.     

Influence of formulation and process variables on in vitro release of theophylline from directly-compressed Eudragit matrix tablets

Extended-release theophylline (TP) matrix tablets were prepared by direct compression of drug and different pH-dependent (Eudragit L100, S100 and L100-55) and pH-independent (Eudragit RLPO and RSPO) polymer combinations. The influence of varying the polymer/polymer (w/w) ratio and the drug incorporation method (simple blend or solid dispersion) was also evaluated. Drug release, monitored using the Through Flow Cell system, markedly depended on both the kind of Eudragit polymer combinations used and their relative content in the matrix. Maintaining a constant 1:1 (w/w) drug/polymers ratio, the selection of appropriate mixtures of pH-dependent and pH-independent polymers enabled achievement of a suitable control of TP release. In particular, matrices with a 0.7:0.3 w/w mixture of Eudragit L100-Eudragit RLPO showed highly reproducible drug release profiles, with an almost zero-order kinetic, and allowed 100% released drug after 360 min. As for the effect of the drug incorporation method, simple blending was better than the solid dispersion technique, which not only did not improve the release data reproducibility, but also caused, unexpectedly, a marked slowing down in drug release rate.     

Amorphous Stabilization and Dissolution Enhancement of Amorphous Ternary Solid Dispersions: Combination of Polymers Showing Drug–Polymer Interaction for Synergistic Effects

The purpose of this study was to understand the combined effect of two polymers showing drug–polymer interactions on amorphous stabilization and dissolution enhancement of indomethacin (IND) in amorphous ternary solid dispersions. The mechanism responsible for the enhanced stability and dissolution of IND in amorphous ternary systems was studied by exploring the miscibility and intermolecular interactions between IND and polymers through thermal and spectroscopic analysis. Eudragit E100 and PVP K90 at low concentrations (2.5%–40%, w/w) were used to prepare amorphous binary and ternary solid dispersions by solvent evaporation. Stability results showed that amorphous ternary solid dispersions have better stability compared with amorphous binary solid dispersions. The dissolution of IND from the ternary dispersion was substantially higher than the binary dispersions as well as amorphous drug. Melting point depression of physical mixtures reveals that the drug was miscible in both the polymers; however, greater miscibility was observed in ternary physical mixtures. The IR analysis confirmed intermolecular interactions between IND and individual polymers. These interactions were found to be intact in ternary systems. These results suggest that the combination of two polymers showing drug–polymer interaction offers synergistic enhancement in amorphous stability and dissolution in ternary solid dispersions. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 103:3511–3523, 2014     

Enhanced solubility and dissolution rate of itraconazole by a solid dispersion technique.

The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, itraconazole, by a solid dispersion technique. Solid dispersion particles of itraconazole were prepared with various pH-independent and -dependent hydrophilic polymers and were characterized by differential scanning calorimetry, powder X-ray diffraction and scanning electron microscopy. Of the polymers tested, pH-dependent hydrophilic polymers, AEA and Eudragit E 100, resulted in highest increases in drug solubility (range, 141.4-146.9-fold increases). The shape of the solid dispersion particles was spherical, with their internal diameter ranging from 1-10 microm. The dissolution rate of itraconazole from the tablets prepared by spray drying (SD-T) was fast, with > 90% released within 5 min.SD-T prepared with AEA or Eudragit E 100 at a 1:1 drug hydrophilic polymer ratio (w/w) showed approximately 70-fold increases in the dissolution rate over a marketed product.     

Biological fate and interaction with cytochromes P450 of the nanocarrier material,d-α-tocopheryl polyethylene glycol 1000 succinate

d-α-Tocopheryl polyethylene glycol 1000 succinate (TPGS, also known as vitamin E-TPGS) is a biodegradable amphiphilic polymer prepared by esterification of vitamin E with polyethylene glycol (PEG) 1000. It is approved by the US Food and Drug Administration (FDA) and has found wide application in nanocarrier drug delivery systems (NDDS). Fully characterizing the in vivo fate and pharmacokinetic behavior of TPGS is important to promote the further development of TPGS-based NDDS. However, to date, a bioassay for the simultaneous quantitation of TPGS and its metabolite, PEG1000, has not been reported. In the present study, we developed such an innovative bioassay and used it to investigate the pharmacokinetics, tissue distribution and excretion of TPGS and PEG1000 in rat after oral and intravenous dosing. In addition, we evaluated the interaction of TPGS with cytochromes P450 (CYP450s) in human liver microsomes. The results show that TPGS is poorly absorbed after oral administration with very low bioavailability and that, after intravenous administration, TPGS and PEG1000 are mainly distributed to the spleen, liver, lung and kidney before both being slowly eliminated in urine and feces as PEG1000. In vitro studies show the inhibition of human CYP450 enzymes by TPGS is limited to a weak inhibition of CYP3A4. Overall, our results provide a clear picture of the in vivo fate of TPGS which will be useful in evaluating the safety of TPGS-based NDDS in clinical use and in promoting their further development.KEY WORDS: TPGS, LC‒MS/MS, Nanocarrier materials, Pharmacokinetics, Tissue distribution, Metabolism, Excretion, Cytochrome P450     

Processing challenges with solid dosage formulations containing vitamin E TPGS

The objective of this study is to investigate processing challenges associated with the incorporation of Vitamin E TPGS (d-α tocopheryl polyethylene glycol 1000 succinate) into solid pharmaceutical dosage forms. For this work, a wet granulation process (high-shear and fluid bed) was used and Vitamin E TPGS was added as part of the binder solution during granulation. It was shown that Vitamin E TPGS can be incorporated into a prototype formulation at 10% w/w concentration without any significant processing challenges. However, the resulting granulations could only be compressed successfully at low tablet press speeds (dwell time ~100?ms). When compressed at low dwell times (<20?ms) representative of commercial tablet manufacturing, a significant loss in compactability was observed. In addition, several other tablet defects were observed. It was shown that intragranular incorporation of Aeroperl^® 300, a granulated form of colloidal silicon dioxide, was able to overcome these compaction problems. The formulation consisting of Aeroperl^® 300 showed significantly lower granule particle size, higher granule porosity and higher compactability as compared to the formulation without Aeroperl^® 300.     

Increased physical stability and improved dissolution properties of itraconazole, a class II drug, by solid dispersions that combine fast- and slow-dissolving polymers

Solid dispersions were prepared of itraconazole-Eudragit E100, itraconazole-PVPVA64, and itraconazole-Eudragit E100/PVPVA64 using a corotating twin-screw hot-stage extruder. Modulated temperature differential scanning calorimetry (MTDSC) was used to evaluate the miscibility of the extrudates, and dissolution experiments were performed in simulated gastric fluid without pepsin (SGF(sp)). Itraconazole and Eudragit E100 are miscible up to 13% w/w drug loading. From that concentration on, phase separation is observed. Pharmaceutical performance of this dispersion was satisfactory because 80% of the drug dissolved after 30 min. Extrudates of itraconazole and PVPVA64 were completely miscible but the pharmaceutical performance was low, with 45% of drug dissolved after 3 h. Combination of both polymers in different ratios, with a fixed drug loading of 40% w/w, was evaluated. MTDSC results clearly indicated a two-phase system consisting of itraconazole-Eudragit E100 and itraconazole-PVPVA64 phases. In these extrudates, no free crystalline or glassy clusters of itraconazole were observed; all itraconazole was mixed with one of both polymers. The pharmaceutical performance was tested in SGF(sp) for different polymer ratios, and Eudragit E100/PVPVA64 ratios of 50/50 and 60/40 showed significant increases in dissolution rate and level. Polymer ratios of 70/30 and 80/20, on the other hand, had a release of 85% after 30 min. Precipitation of the drug was never observed. The combination of the two polymers provides a solid dispersion with good dissolution properties and improved physical stability compared with the binary solid dispersions of itraconazole.     

The formulation of Halofantrine as either non-solubilizing PEG 6000 or solubilizing lipid based solid dispersions: physical stability and absolute bioavailability assessment

A non-solubilizing solid dispersion formulation (polyethylene glycol 6000) and two solubilizing solid dispersions (Vitamin E TPGS and a Gelucire 44/14/Vitamin E TPGS blend) containing the antimalarial, Halofantrine (Hf), were formulated for bioavailability assessment in fasted beagles to determine if the oral absorption of Hf can be enhanced by these delivery systems. Solid dispersions comprising varying proportions of drug to carrier were prepared by the fusion method. Whilst the non-solubilizing formulation was assessed according to its dispersion characteristics, the solubilizing solid dispersions were assessed by their ability to form microemulsions upon dispersion. Studies in fasted beagles showed that the solid dispersions afforded a five- to seven-fold improvement in absolute oral bioavailability when compared with the commercially available tablet formulation. The delivery of Hf in either a solubilizing or non-solubilizing solid dispersion did not result in significant differences in oral bioavailability. The physical stability of the solid dispersions was studied using differential scanning calorimetry and X-ray powder diffraction.     

Diffusion Transport Properties of Polymeric Complex Matrix Systems Based on Eudragit E100 and L100 Copolymers

With a view to application in oral controlled drug release systems, a new interpolyelectrolyte complex (IPEC) between Eudragit E100 and Eudragit L100 has been synthesized. The IPEC structure is characterized by two maxima in the swelling kinetics curve, which occur in the regions of media with different pH values modeling conditions in the gastrointestinal tract. The release of a model drug (ibuprofen) from IPEC-based tablets was significantly retarded as compared to the behavior observed for individual polymers and their physical mixture.__________Translated from Khimiko-Farmatsevticheskii Zhurnal, Vol. 39, No. 2, pp. 34 – 38, February, 2005.     

Fast-dissolving tablets of glyburide based on ternary solid dispersions with PEG 6000 and surfactants

Marketed glyburide tablets present unsatisfying dissolution profiles that give rise to variable bioavailability. With the purpose of developing a fast-dissolving tablet formulation able to assure a complete drug dissolution, we investigated the effect of the addition to a reference tablet formulation of different types (anionic and nonionic) and amounts of hydrophilic surfactants, as well as the use of a new technique, based on ternary solid dispersions of the drug with an hydrophilic carrier (polyethylene glycol [PEG] 6000) and a surfactant. Tablets were prepared by direct compression or previous wet granulation of suitable formulations containing the drug with each surfactant or drug:PEG:surfactant ternary dispersions at different PEG:surfactant w/w ratios. The presence of surfactants significantly increased (p<0.01) the drug dissolution rate, but complete drug dissolution was never achieved. On the contrary, in all cases tablets containing ternary solid dispersions achieved 100% dissolved drug within 60 min. The best product was the 10:80:10 w/w ternary dispersion with PEG 6000 and sodium laurylsulphate, showing a dissolution efficiency 5.5-fold greater than the reference tablet formulation and 100% drug dissolution after only 20 min.     

聚乙二醇1000维生素E琥珀酸酯应用进展

目的对聚乙二醇1000维生素E琥珀酸酯(TPGS)的理化性质、在药物制剂与临床治疗中的应用进行综述。方法依据近期国外公开发表的文献与专利,对TPGS的研究应用及理化性质与安全性,进行分类、归纳和整理。结果TPGS在制剂研究中可作为增溶剂、吸收促进剂、乳化剂、增塑剂以及脂溶性药物传递系统的载体;在临床上可治疗维生素E缺乏症,改善维生素E缺乏患者体内维生素E水平。结论TPGS作为一种安全有效的药用辅料与维生素E补充剂,在药学领域应用前景广阔,将会得到广泛应用。     

Biological fate and interaction with cytochromes P450 of the nanocarrier material,d-α-tocopheryl polyethylene glycol 1000 succinate

d-α-Tocopheryl polyethylene glycol 1000 succinate (TPGS, also known as vitamin E-TPGS) is a biodegradable amphiphilic polymer prepared by esterification of vitamin E with polyethylene glycol (PEG) 1000. It is approved by the US Food and Drug Administration (FDA) and has found wide application in nanocarrier drug delivery systems (NDDS). Fully characterizing the in vivo fate and pharmacokinetic behavior of TPGS is important to promote the further development of TPGS-based NDDS. However, to date, a bioassay for the simultaneous quantitation of TPGS and its metabolite, PEG1000, has not been reported. In the present study, we developed such an innovative bioassay and used it to investigate the pharmacokinetics, tissue distribution and excretion of TPGS and PEG1000 in rat after oral and intravenous dosing. In addition, we evaluated the interaction of TPGS with cytochromes P450 (CYP450s) in human liver microsomes. The results show that TPGS is poorly absorbed after oral administration with very low bioavailability and that, after intravenous administration, TPGS and PEG1000 are mainly distributed to the spleen, liver, lung and kidney before both being slowly eliminated in urine and feces as PEG1000. In vitro studies show the inhibition of human CYP450 enzymes by TPGS is limited to a weak inhibition of CYP3A4. Overall, our results provide a clear picture of the in vivo fate of TPGS which will be useful in evaluating the safety of TPGS-based NDDS in clinical use and in promoting their further development.     

Mechanistic study of solubility enhancement of nifedipine using vitamin E TPGS or solutol HS-15

The objective of our study was to find mechanisms responsible for solubility enhancement of nifedipine in solid dispersions of vitamin E TPGS and/or solutol HS-15. Solid dispersions of nifedipine with selected polymers such as vitamin E TPGS, solutol HS-15, PEG(1,000), and lipocol C-10 of varying drug/polymer ratios were prepared by a fusion method. The solubility enhancement was found to be in the order of vitamin E TPGS > solutol HS-15 > lipocol C-10 > PEG(1,000). Lipocol C-10, with a similar hydrophilic-lipophilic value as vitamin E TPGS, showed a comparable retained solubility enhancement during saturation solubility studies but had lower dissolution profile. Overall, vitamin E TPGS showed the best solubility and dissolution performance, while solutol HS-15 and lipocol C-10 demonstrated moderate solubility enhancements. Solid dispersions of vitamin E TPGS as prepared by microfluidization technique initially showed slightly higher solubility compared with samples prepared by fusion method, but eventually it became the same as the study progressed. However, solid dispersion of solutol HS-15 as prepared by microfluidization demonstrated a significant, sustained increased in solubility over its sample when prepared by fusion method. Based on these results, we concluded that enhanced solubility using vitamin E TPGS and solutol HS-15 resulted from a partial conversion of crystalline drug to the amorphous form, increase in wettability of the drug by water soluble polymers, better separation of drug particles, micellar solubilization of drug by high concentrations of surfactant polymers, and interaction between polymer and drug at the molecular level.     

Correlation of Inhibitory Effects of Polymers on Indomethacin Precipitation in Solution and Amorphous Solid Crystallization Based on Molecular Interaction

Purpose

To correlate the polymer’s degree of precipitation inhibition of indomethacin in solution to the amorphous stabilization in solid state.

Methods

Precipitation of indomethacin (IMC) in presence of polymers was continuously monitored by a UV spectrophotometer. Precipitates were characterized by PXRD, IR and SEM. Solid dispersions with different polymer to drug ratios were prepared using solvent evaporation. Crystallization of the solid dispersion was monitored using PXRD. Modulated differential scanning calorimetry (MDSC), IR, Raman and solid state NMR were used to explore the possible interactions between IMC and polymers.

Results

PVP K90, HPMC and Eudragit E100 showed precipitation inhibitory effects in solution whereas Eudragit L100, Eudragit S100 and PEG 8000 showed no effect on IMC precipitation. The rank order of precipitation inhibitory effect on IMC was found to be PVP K90?>?Eudragit E100?>?HPMC. In the solid state, polymers showing precipitation inhibitory effect also exhibited amorphous stabilization of IMC with the same rank order of effectiveness. IR, Raman and solid state NMR studies showed that rank order of crystallization inhibition correlates with strength of molecular interaction between IMC and polymers.

Conclusions

Correlation is observed in the polymers ability to inhibit precipitation in solution and amorphous stabilization in the solid state for IMC and can be explained by the strength of drug polymer interactions.     

Characterization of ternary solid dispersions of itraconazole, PEG 6000, and HPMC 2910 E5

In order to reduce the crystallinity of PEG 6000, blends were prepared by spray drying and extrusion with the following polymers; PVP K25, PVPVA 64, and HPMC 2910 E5. The maximal reduction of crystallinity in PEG 6000 was obtained by co-spray drying with HPMC 2910 E5. In the next step the model drug Itraconazole was added to the blend and the resulting ternary solid dispersions were characterized. The results of this study show that the addition of PEG 6000 to the Itraconazole/HPMC 2910 E5 system leads to phase separation that in most cases gives rise to recrystallization of either PEG 6000 or Itraconazole. For all ternary dispersions containing 20% of Itraconazole the drug was highly amorphous and the dissolution was improved compared to the binary 20/80 w/w Itraconazole/HPMC 2910 E5 solid dispersion. For all ternary dispersions containing 40% of Itraconazole, the drug was partially crystalline and the dissolution was lower than the dissolution of the binary 40/60 w/w Itraconazole/HPMC 2910 E5 dispersion. These results show that provided Itraconazole is highly amorphous the addition of PEG 6000 to HPMC 2910 E5 leads to an increase in drug release.     

Formulation Development and Dissolution Rate Enhancement of Efavirenz by Solid Dispersion Systems

The aim of this study was to enhance the dissolution rate of efavirenz using solid dispersion systems (binary and ternary). A comparison between solvent and fusion method was also investigated. Solid dispersions of efavirenz were prepared using polyethylene glycol 8000, polyvinylpyrrolidone K30 alone and combination of both. Tween 80 was incorporated to obtain a ternary solid dispersion system. Dissolution tests were conducted and evaluated on the basis of cumulative percentage drug release and dissolution efficiency. Physicochemical characterizations of the solid dispersions were carried out using differential scanning calorimetric, powder X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. Dissolution was remarkably improved in both systems compared to pure efavirenz (P<0.05). An optimum ratio was identified at a drug:polymer of 1:10. Incorporation of Tween 80 to 1:10 formulations formed using solvent method showed further improvement in the dissolution rate. Physicochemical characterization results suggested that efavirenz existed in the amorphous form in all the solid dispersion systems providing evidence of improvement in dissolution. No statistically significant difference (P>0.05) in dissolution was observed between the two methods. Binary and ternary solid dispersion systems both have showed a significant improvement in the dissolution rate of efavirenz. Formulations with only polyvinylpyrrolidone K30 showed best dissolution profile and 1:10 was identified as an optimum drug-polymer weight ratio.