Dissolution Performance of High Drug Loading Celecoxib Amorphous Solid Dispersions Formulated with Polymer Combinations

Purpose

The aims of this study were twofold. First, to evaluate the effectiveness of selected polymers in inhibiting solution crystallization of celecoxib. Second, to compare the release rate and crystallization tendency of celecoxib amorphous solid dispersions (ASDs) formulated with a single polymer, or binary polymer combinations.

Methods

The effectiveness of polymers, polyvinylpyrrolidone (PVP), hydroxypropylmethyl cellulose (HPMC) or HPMC acetate succinate (HPMCAS), in maintaining supersaturation of celecoxib solutions was evaluated by performing nucleation induction time measurements. Crystallization kinetics of ASD suspensions were monitored using Raman spectroscopy. Dissolution experiments were carried out under non-sink conditions.

Results

Pure amorphous celecoxib crystallized rapidly through both matrix and solution pathways. Matrix and solution crystallization was inhibited when celecoxib was molecularly mixed with a polymer, resulting in release of the drug to form supersaturated solutions. Cellulosic polymers were more effective than PVP in maintaining supersaturation. Combining a cellulosic polymer and PVP enabled improved drug release and stability to crystallization.

Conclusions

Inclusion of an effective solution crystallization inhibitor as a minor component in ternary dispersions resulted in prolonged supersaturation following dissolution. This study shows the feasibility of formulation strategies for ASDs where a major polymer component is used to achieve one key property e.g. release, while a minor polymer component is added to prevent crystallization.

     

Insights into Nano- and Micron-Scale Phase Separation in Amorphous Solid Dispersions Using Fluorescence-Based Techniques in Combination with Solid State Nuclear Magnetic Resonance Spectroscopy

Purpose

Miscibility between the drug and the polymer in an amorphous solid dispersion (ASD) is considered to be one of the most important factors impacting the solid state stability and dissolution performance of the active pharmaceutical ingredient (API). The research described herein utilizes emerging fluorescence-based methodologies to probe (im)miscibility of itraconazole (ITZ)-hydroxypropyl methylcellulose (HPMC) ASDs.

Methods

The ASDs were prepared by solvent evaporation with varying evaporation rates and were characterized by steady-state fluorescence spectroscopy, confocal imaging, differential scanning calorimetry (DSC), and solid state nuclear magnetic resonance (ssNMR) spectroscopy.

Results

The size of the phase separated domains for the ITZ-HPMC ASDs was affected by the solvent evaporation rate. Smaller domains (<10 nm) were observed in spray-dried ASDs, whereas larger domains (>30 nm) were found in ASDs prepared using slower evaporation rates. Confocal imaging provided visual confirmation of phase separation along with chemical specificity, achieved by selectively staining drug-rich and polymer-rich phases. ssNMR confirmed the results of fluorescence-based techniques and provided information on the size of phase separated domains.

Conclusions

The fluorescence-based methodologies proved to be sensitive and rapid in detecting phase separation, even at the nanoscale, in the ITZ-HPMC ASDs. Fluorescence-based methods thus show promise for miscibility evaluation of spray-dried ASDs.

     

Effect of Chemical Binding of Doxorubicin Hydrochloride to Gold Nanoparticles, <Emphasis Type="Italic">Versus</Emphasis> Electrostatic Adsorption,on the <Emphasis Type="Italic">In Vitro</Emphasis> Drug Release and Cytotoxicity to Breast Cancer Cells

Purpose

The selective delivery of chemotherapeutic agent to the affected area is mainly dependent on the mode of drug loading within the delivery system. This study aims to compare the physical method to the chemical method on the efficiency of loading DOX.HCl to GNPs and the specific release of the loaded drug at certain tissue.

Method

Bifunctional polyethylene glycol with two different functionalities, the alkanethiol and the carboxyl group terminals, was synthesized. Then, DOX·HCl was covalently linked via hydrazone bond, a pH sensitive bond, to the carboxyl functional group and the produced polymer was used to prepare drug functionalized nanoparticles. Another group of GNPs was coated with carboxyl containing polymer; loading the drug into this system by the means of electrostatic adsorption. Finally, the prepared system were characterized with respect to size, shape and drug release in acetate buffer pH 5 and PBS pH 7.4 Also, the effect of DOX.HCl loaded systems on cell viability was assessed using MCF-7 breast cancer cell line.

Results

The prepared nanoparticles were spherical in shape, small in size and monodisperse. The release rate of the chemically bound drug in the acidic pH was higher than the electrostatically adsorbed one. Moreover, both systems show little release at pH 7.4. Finally, cytotoxicity profiles against human breast adenocarcinoma cell line (MCF-7) exhibited greater cytotoxicity of the chemically bound drug over the electrostatically adsorbed one.

Conclusion

Chemical binding of DOX·HCl to the carboxyl group of PEG coating GNPs selectively delivers high amount of drug to tumour-affected tissue which leads to reducing the unwanted effects of the drug in the non-affected ones.

     

Gelatin Nano-coating for Inhibiting Surface Crystallization of Amorphous Drugs

Purpose

Inhibit the fast surface crystallization of amorphous drugs with gelatin nano-coatings.

Methods

The free surface of amorphous films of indomethacin or nifedipine was coated by a gelatin solution (type A or B) and dried. The coating’s effect on surface crystallization was evaluated. Coating thickness was estimated from mass change after coating.

Results

For indomethacin (weak acid, pK_a?=?4.5), a gelatin coating of either type deposited at pH 5 and 10 inhibited its fast surface crystal growth. The coating thickness was 20?±?10 nm. A gelatin coating deposited at pH 3, however, provided no protective effect. These results suggest that an effective gelatin coating does not require that the drug and the polymer have opposite charges. The ineffective pH 3 coating might reflect the poor wetting of indomethacin’s neutral, hydrophobic surface by the coating solution. For nifedipine (weak base, pK_a?=?2.6), a gelatin coating of either type deposited at pH 5 inhibited its fast surface crystal growth.

Conclusions

Gelatin nano-coatings can be conveniently applied to amorphous drugs from solution to inhibit fast surface crystallization. Unlike strong polyelectrolyte coatings, a protective gelatin coating does not require strict pairing of opposite charges. This could make gelatin coating a versatile, pharmaceutically acceptable coating for stabilizing amorphous drugs.

     

Physical Stability of Amorphous Solid Dispersions: a Physicochemical Perspective with Thermodynamic,Kinetic and Environmental Aspects

Purpose

Amorphous solid dispersions (ASDs) have been widely used in the pharmaceutical industry for solubility enhancementof poorly water-soluble drugs. The physical stability, however, remainsone of the most challenging issues for the formulation development.Many factors can affect the physical stability via different mechanisms, and therefore an in-depth understanding on these factors isrequired.

Methods

In this review, we intend to summarize the physical stability of ASDsfrom a physicochemical perspective whereby factors that can influence the physical stability areclassified into thermodynamic, kinetic and environmental aspects.

Results

The drug-polymer miscibility and solubility are consideredas the main thermodynamicfactors which may determine the spontaneity of the occurrence of the physical instabilityof ASDs. Glass-transition temperature,molecular mobility, manufacturing process,physical stabilityof amorphous drugs, and drug-polymerinteractionsareconsideredas the kinetic factors which areassociated with the kinetic stability of ASDs on aging. Storage conditions including temperature and humidity could significantly affect the thermodynamicand kineticstabilityof ASDs.

Conclusion

When designing amorphous solid dispersions, it isrecommended that these thermodynamic, kinetic and environmental aspects should be completely investigatedand compared to establish rationale formulations for amorphous solid dispersions with high physical stability.

     

Arginine-α, β-dehydrophenylalanine Dipeptide Nanoparticles for pH-Responsive Drug Delivery

Purpose

Nanoparticles (NPs) exhibiting responsiveness towards pH variations in organs, tissue microenvironments and cellular compartments can significantly add on to the drug delivery potential. Here, we have developed NPs from an amphipathic dipeptide, Arginine-α, β-dehydrophenylalanine (RΔF), and tried to explore their pH responsive drug delivery potential in various cancer cells.

Methods

RΔF-NPs were architectured by harnessing the process of molecular self-assembly followed by the assessment of effect of pH on NPs morphology using zetasizer, SEM and CD. FTIR and PXRD analysis of the dipeptide and doxorubicin (Dox) were carried out for compatibility assessment followed by encapsulation of Dox in RΔF-NPs. RΔF-Dox-NPs were evaluated for pH dependent release as well as for in-vitro cellular internalization and efficacy in cancer cells.

Results

RΔF self-assembled to form monodispersed particles at pH 7. SEM analysis revealed a loss of overall particle morphology along with particle aggregation at highly acidic and basic pH respectively. The NPs demonstrated a slow and sustained release behaviour at pH 7 (97.64?±?4.71% after 36 h) in comparison to pH 2 (90.27?±?1.45% after 8 h) and pH 10 (96.39?±?3.87% after 12 h). In-vitro efficacy studies carried-out in various cancer cells revealed that RΔF-Dox-NPs exhibited higher efficacy with 1.65, 1.95 and 13.34 fold lower IC₅₀ values in comparison to Dox in C6, HCT-116 and AGS cell lines.

Conclusions

RΔF-Dox-NPs with higher drug release at acidic pH, enhanced internalization in cancer cells along with higher cytotoxic potential can act as effective pH responsive drug delivery systems.

     

Structural Stability of Recombinant Human Growth Hormone (r-hGH) as a Function of Polymer Surface Properties

Purpose

Despite the fact that r-hGH was first approved for use by FDA in 1995 and the conventional dosage form in the market has a limitation of daily subcutaneous injections, there remains a lack of sustained delivery system in the market. Nutropin depot, a long-acting dosage form of r-hGH was approved for marketing by FDA in 1999, however, it was discontinued in 2004. Since then, unabating efforts have been made to develop biodegradable polymer based formulations for r-hGH delivery. However, grey area is the comprehension of structural stability of r-hGH at an interface with the polymer and it is of utmost important to attain safe and efficacious sustained delivery system. The purpose of this study was to evaluate the changes in structure of r-hGH upon adsorption at biodegradable PLGA nanoparticles of different hydrophobicity as a function of pH.

Methods

DLS, fluorescence spectroscopy, and CD were collectively employed to evaluate structural changes in r-hGH.

Results

The studies revealed that r-hGH is most stable with low to high hydrophobicity PLGA grades under pH 7.2 followed by 5.3.

Conclusion

Overall, the nature and magnitude of structural changes observed has a strong dependence on the pH and differences and degree of hydrophobicity of PLGA.

     

Impact of Drug-Polymer Miscibility on Enthalpy Relaxation of Irbesartan Amorphous Solid Dispersions

Purpose

Drug-polymer miscibility has been proposed to play a critical role in physical stability of amorphous solid dispersions (ASDs). The purpose of the current work was to investigate the role of drug-polymer miscibility on molecular mobility, measured as enthalpy relaxation (ER) of amorphous irbesartan (IBS) in ASDs.

Methods

Two polymers, i.e. polyvinylpyrrolidone K30 (PVP K30) and hydroxypropyl methylcellulose acetate succinate (HPMCAS), were used to generate ASDs with 10% w/w of the polymer. Drug-polymer miscibility was determined using melting point depression (MPD) method. Molecular mobility was assessed from ER studies at a common degree of undercooling (DOU) (T_g???13.0°C?±?0.5°C).

Results

IBS exhibited higher miscibility in PVP K30 as compared to HPMCAS at temperature?>?140°C. However, extrapolation of miscibility data to storage temperature (62°C) using Flory-Huggins (F-H) theory revealed a reversal of the trend. Miscibility of IBS was found to be higher in HPMCAS (2.6%) than PVP K30 (1.3%) at 62°C. Stretched relaxation time (τ^β) of 17.4365 h and 7.0886 h was obtained for IBS-HPMCAS and IBS-PVP K30 ASDs, respectively.

Conclusion

Miscibility of drug-polymer at storage temperature explained the behavior of the molecular mobility, while miscibility near the melting point provided a reverse trend. Results suggest that drug-polymer miscibility determined at temperatures higher than the storage temperature should be viewed cautiously.

     

Safety Assessment of Formulation Vehicles Following Intravitreal Administration in Rabbits

Purpose

Evaluate 21 formulation vehicles administered to rabbits after intravitreal injection for tolerability and safety.

Methods

Forty-two Dutch Belted rabbits were anesthetized, and the eyes received a single intravitreal injection of the excipient formulation. Clinical signs and ocular irritation responses were recorded twice daily for 7 days and microscopic evaluation of the eyes, optic nerve, and eyelids was completed at 1-week post treatment.

Results

Saline (≥ 300 mOsm and?≤?592 mOsm at pH 7.0 or 300 mOsm at pH 8.0) and 10 formulation excipients; (10% w/v PEG 3350 at pH 7.4, 1% polysorbate 21 at pH 7.4, PVA at pH 7.0, 0.2% polysorbate 80 at pH 7.2, 0.2% Pluronic F108® at pH 7.3, 2%, 100 mM sodium sulfate at pH 3.2, 2 mM sodium glycocholate at pH 7.4, and 275 mM D-mannitol pH 7.0 in sterile water, and 100 mM sodium phosphate in combination with 0.9% NaCl 300 mOsm and 0.01% or 0.05% polysorbate 80 at pH 7.4) considered as formulation vehicles for intravitreal injectables, were well-tolerated in rabbits. Clinical signs were transient and microscopic changes were not observed.

Conclusions

Of the 21 formulation vehicles evaluated, 10 formulation vehicles were well-tolerated in rabbits and feasible candidates for future investigations.

     

Development of Novel Warfarin-Silica Composite for Controlled Drug Release

Purpose

The work is devoted to synthesis and study of warfarin composites with unmodified, methyl and phenyl modified silica in order to develop controlled release formulation of the anticoagulant.

Methods

The composites were prepared by two routes, adsorption and sol-gel, and characterized with FTIR spectroscopy, dynamic light scattering and DSC methods. The drug release behavior from the composites in media with pH 1.6, 6.8 and 7.4 was analyzed in vitro. The release kinetics of the warfarin – silica composites prepared by the two routes was compared among each other and with analogous silica composites with water soluble drug molsidomine.

Results

The comparative analysis showed that in general the kinetic regularities and mechanisms of release for both drugs are similar and determined by nonuniform distribution of the drugs over the silica matrixes and stability of the matrixes in the studied media for the adsorbed composites and uniformly distributed drug and more brittle structure for the sol-gel composites.

Conclusions

The sol-gel composite of warfarin - phenyl modified silica is perspective for further development of novel warfarin formulation with controlled release because it releases warfarin according to zero-order kinetic law with approximately equal rate in the media imitating different segments of gastrointestinal tract.

     

Initial Drug Dissolution from Amorphous Solid Dispersions Controlled by Polymer Dissolution and Drug-Polymer Interaction

Purpose

To identify the key formulation factors controlling the initial drug and polymer dissolution rates from an amorphous solid dispersion (ASD).

Methods

Ketoconazole (KTZ) ASDs using PVP, PVP-VA, HMPC, or HPMC-AS as polymeric matrix were prepared. For each drug-polymer system, two types of formulations with the same composition were prepared: 1. Spray dried dispersion (SDD) that is homogenous at molecular level, 2. Physical blend of SDD (80% drug loading) and pure polymer (SDD-PB) that is homogenous only at powder level. Flory-Huggins interaction parameters (χ) between KTZ and the four polymers were obtained by Flory-Huggins model fitting. Solution ¹³C NMR and FT-IR were conducted to investigate the specific drug-polymer interaction in the solution and solid state, respectively. Intrinsic dissolution of both the drug and the polymer from ASDs were studied using a Higuchi style intrinsic dissolution apparatus. PXRD and confocal Raman microscopy were used to confirm the absence of drug crystallinity on the tablet surface before and after dissolution study.

Results

In solid state, KTZ is completely miscible with PVP, PVP-VA, or HPMC-AS, demonstrated by the negative χ values of ?0.36, ?0.46, ?1.68, respectively; while is poorly miscible with HPMC shown by a positive χ value of 0.23. According to solution ¹³C NMR and FT-IR studies, KTZ interacts with HPMC-AS strongly through H-bonding and dipole induced interaction; with PVPs and PVP-VA moderately through dipole-induced interactions; and with HPMC weakly without detectable attractive interaction. Furthermore, the “apparent” strength of drug-polymer interaction, measured by the extent of peak shift on NMR or FT-IR spectra, increases with the increasing number of interacting drug-polymer pairs. For ASDs with the presence of considerable drug-polymer interactions, such as KTZ/PVPs, KTZ/PVP-VA, or KTZ /HPMC-AS systems, drug released at the same rate as the polymer when intimate drug-polymer mixing was ensured (i.e., the SDD systems); while drug released much slower than the polymer when molecular level mixing or drug-polymer interaction was absent (SDD-PB systems). For ASDs without drug-polymer interaction (i.e., KTZ/HPMC systems), the mixing homogeneity had little impact on the release rate of either the drug or the polymer thus SDD and SDD-PB demonstrated the same drug or polymer release rate, while the drug released slowly and independently of polymer release.

Conclusions

The initial drug release from an ASD was controlled by 1) the polymer release rate; 2) the strength of drug-polymer interaction, including the intrinsic interaction caused by the chemistry of the drug and the polymer (measured by the χ value), as well as that the apparent interaction caused by the drug-polymer ratio (measure by the extent of peak shift on spectroscopic analysis); and 3) the level of mixing homogeneity between the drug and polymer. In summary, the selection of polymer, drug-polymer ratio, and ASD processing conditions have profound impacts on the dissolution behavior of ASDs.

Open image in new window

Graphical Abstract Relationship between initial drug and polymer dissolution rates from amorphous solid dispersions with different mixing uniformity and drug-polymer interactions

     

Effect of Tumor Relevant Acidic Environment in the Interaction of a <Emphasis Type="Italic">N</Emphasis>-hydroxyindole-2-Carboxylic Derivative with the Phospholipid Bilayer

Purpose

The inhibitors of the human isoform 5 of lactate dehydrogenase (hLDH5) have attracted growing interest as efficient anti-cancer agents. In the present paper, the interactions between an efficient hLDH5 inhibitor (N-hydroxyindole-2-carboxylic derivative) and lipid bilayers based on dipalmitoylphosphatidylcholine (DPPC) were investigated. Additionally, since interstitial acidification plays a key role in tumor pathogenesis and tumor drug therapy, the effect of acidic pH was assessed and correlated to DPPC/drug interaction.

Methods

Four different techniques were used: differential scanning calorimetry, dynamic light scattering, UV-VIS second derivative spectrometry and attenuated total reflection Fourier transformed infrared spectroscopy.

Results

All techniques concur in highlighting a structural change of lipid assembly, susceptible both to pH change and to the presence of the antitumor compound. Lipid vesicles appeared more compact at the lower pH, since the thermal pre-transition from the lamellar gel phase to the ripple gel phase was absent at pH 7.4 and the infrared analysis revealed a stronger acyl chain packing as well as a different hydration degree. Drug interaction was mainly detected in the lipid region including the ester linkages and the first portion of the acyl chains. Furthermore, a lower drug partitioning was recorded at pH 6.6.

Conclusions

The investigated antitumor agent possesses a stable negative charge at the investigated pH values, thus the lower interaction at the acidic pH is mainly ascribable to an environmental effect on lipid assembly. Therefore, drug efficacy under tumor acid conditions may be hampered by the observed lipid membrane constraints, and suggest for the development of suitable prodrugs.

     

Influence of Low-Molecular-Weight Excipients on the Phase Behavior of PVPVA64 Amorphous Solid Dispersions

Purpose

The oral bioavailability of poorly water-soluble active pharmaceutical ingredients (APIs) can be improved by the preparation of amorphous solid dispersions (ASDs) where the API is dissolved in polymeric excipients. Desired properties of such ASDs like storage stability, dissolution behavior, and processability can be optimized by additional excipients. In this work, the influence of so-called low-molecular-weight excipients (LMWEs) on the phase behavior of ASDs was investigated.

Method

Binary ASDs of an amorphous API, naproxen (NAP) or acetaminophen (APAP), embedded in poly-(vinylpyrrolidone-co-vinyl acetate) (PVPVA64) were chosen as reference systems. Polyethylene glycol 1500 (PEG1500), D-α-tocopherol polyethylene glycol 1000 succinate (TPGS1000), propylene glycol monocaprylate type II (Capryol? 90), and propylene glycol monolaurate type I (Lauroglycol? FCC) were used as LMWEs. The API solubility in the excipients and the glass-transition temperature of the ASDs were modeled using the Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT) and the Kwei equation, respectively, and compared to corresponding experimental data.

Results

The API solubility curves in ternary systems with 90/10 wt%/wt% PVPVA64/LMWE ratios were very close to those in pure PVPVA64. However, the glass-transition temperatures of API/PVPVA64/LMWE ASDs were much lower than those of API/PVPVA64 ASDs. These effects were determined experimentally and agreed with the predictions using the PC-SAFT and Kwei models.

Conclusion

The impact of the LMWEs on the thermodynamic stability of the ASDs is quite small while the kinetic stability is significantly decreased even by small LMWE amounts. PC-SAFT and the Kwei equation are suitable tools for predicting the influence of LMWEs on the ASD phase behavior.

     

A Computational/Experimental Assessment of Antitumor Activity of Polymer Nanoassemblies for pH-Controlled Drug Delivery to Primary and Metastatic Tumors

Purpose

Polymer nanoassemblies (PNAs) with drug release fine-tuned to occur in acidic tumor regions (pH?<?7) while sparing normal tissues (pH?=?7.4) were previously shown to hold promise as nanoparticle drug carriers to effectively suppress tumor growth with reduced systemic toxicity. However, therapeutic benefits of pH-controlled drug delivery remain elusive due to complex interactions between the drug carriers, tumor cells with varying drug sensitivity, and the tumor microenvironment.

Methods

We implement a combined computational and experimental approach to evaluate the in vivo antitumor activity of acid-sensitive PNAs controlling drug release in pH 5?~?7.4 at different rates [PNA1 (fastest)?>?PNA2?>?PNA3 (slowest)].

Results

Computational simulations projecting the transport, drug release, and antitumor activity of PNAs in primary and metastatic tumor models of colorectal cancer correspond well with experimental observations in vivo. The simulations also reveal that all PNAs could reach peak drug concentrations in tumors at 11 h post injection, while PNAs with slower drug release (PNA2 and PNA3) reduced tumor size more effectively than fast drug releasing PNA1 (24.5 and 20.3 vs 7.5%, respectively, as fraction of untreated control).

Conclusion

A combined computational/experimental approach may help to evaluate pH-controlled drug delivery targeting aggressive tumors that have substantial acidity.

     

Polymer/Amorphous Salt Solid Dispersions of Ciprofloxacin

Purpose

To improve the pharmaceutical properties of amorphous ciprofloxacin (CIP) succinate salts via formulation as polymer/amorphous salt solid dispersions (ASSDs).

Methods

ASSDs consisting of an amorphous CIP/succinic acid 1:1 or 2:1 salt dispersed in PVP or Soluplus were produced by spray drying and ball milling. The solid state characteristics, miscibility, stability, solubility and passive transmembrane permeability of the ASSDs were then examined.

Results

The ASSDs had higher glass transition and crystallization temperatures than the corresponding amorphous succinate salts, and were also more stable during long-term stability studies. The results of inverse gas chromatography and thermal analysis indicated that the salts and polymers form a miscible mixture. The solubility of the pure drug in water and biorelevant media was significantly increased by all of the formulations. The permeability of the ASSDs did not differ significantly from that of the amorphous CIP succinate salts, however all samples were less permeable than the pure crystalline drug.

Conclusions

The formulation of amorphous CIP succinate salts as ASSDs with polymer improved their long-term stability, but did not significantly affect their solubility or permeability.

     

Match of Solubility Parameters Between Oil and Surfactants as a Rational Approach for the Formulation of Microemulsion with a High Dispersed Volume of Copaiba Oil and Low Surfactant Content

Purpose

Aim was to formulate oil-in-water (O/W) microemulsion with a high volume ratio of complex natural oil, i.e. copaiba oil and low surfactant content. The strategy of formulation was based on (i) the selection of surfactants based on predictive calculations of chemical compatibility between their hydrophobic moiety and oil components and (ii) matching the HLB of the surfactants with the required HLB of the oil.

Method

Solubility parameters of the hydrophobic moiety of the surfactants and of the main components found in the oil were calculated and compared. In turn, required HLB of oils were calculated. Selection of surfactants was achieved matching their solubility parameters with those of oil components. Blends of surfactants were prepared with HLB matching the required HLB of the oils. Oil:water mixtures (15:85 and 25:75) were the titrated with surfactant blends until a microemulsion was formed.

Results

Two surfactant blends were identified from the predictive calculation approach. Microemulsions containing up to 19.6% and 13.7% of selected surfactant blends were obtained.

Conclusion

O/W microemulsions with a high volume fraction of complex natural oil and a reasonable surfactant concentration were formulated. These microemulsions can be proposed as delivery systems for the oral administration of poorly soluble drugs.

     

Multifractal Characterization of Pharmaceutical Hot-Melt Extrudates

Purpose

Multifractal geometry has become a powerful tool to describe complex structures in many fields. Our first aim was to combine imaging and multifractal analysis to better understand the microstructure of pharmaceutical extrudates. A second objective was to study erosion/dispersion behavior of the formulations because it would condition release of any drug.

Methods

Different formulations containing a lipid, a polymer and different silica based inorganic carriers were produced by hot-melt extrusion at various screw speeds. Multifractal analysis was based on scanning electron microscopy/energy dispersive X-Ray spectroscopy images. This microstructural analysis was complemented with dynamic optical imaging of formulation erosion/dispersion behavior.

Results

Multifractal analysis indicated that inorganic carrier type and concentration as well as the screw speed affected the microstructure of the extrudates. The aqueous erosion/dispersion study showed that only the type and concentration of inorganic carrier were important.

Conclusions

The use of microstructural and dispersion analysis appeared to be complementary to better characterize and understand complex formulations obtained by hot-melt extrusion.

     

Paclitaxel and Erlotinib-co-loaded Solid Lipid Core Nanocapsules: Assessment of Physicochemical Characteristics and Cytotoxicity in Non-small Cell Lung Cancer

Purpose

Lung cancer is the leading cause of cancer-related deaths. The aim of this study was to design solid lipid core nanocapsules (SLCN) comprising a solid lipid core and a PEGylated polymeric corona for paclitaxel (PTX) and erlotinib (ERL) co-delivery to non-small cell lung cancer (NSCLC), and evaluate their physicochemical characteristics and in vitro activity in NCI-H23 cells.

Methods

PTX/ERL-SLCN were prepared by nanoprecipitation and sonication and physicochemically characterized by dynamic light scattering, transmission electron microscopy, differential scanning calorimetry, X-ray diffraction, and Fourier-transform infrared spectroscopy. In vitro release profiles at pH 7.4 and pH 5.0 were studied and analyzed. In vitro cytotoxicity and cellular uptake and apoptosis assays were performed in NCI-H23 cells.

Results

PTX/ERL-SLCN exhibited appropriately-sized spherical particles with a high payload. Both PTX and ERL showed pH-dependent and sustained release in vitro profiles. PTX/ERL-SLCN demonstrated concentration- and time-dependent uptake by NCI-H23 cells and caused dose-dependent cytotoxicity in the cells, which was remarkably greater than that of not only the free individual drugs but also the free drug cocktail. Moreover, well-defined early and late apoptosis were observed with clearly visible signs of apoptotic nuclei.

Conclusion

PTX/ERL-SLCN could be employed as an optimal approach for combination chemotherapy of NSCLC.

     

Online Spectroscopic Monitoring of Drug Release Kinetics from Nanostructured Dual-Stimuli-Responsive Conducting Polymer

Purpose

The potential of electrochemical/temperature dual stimuli-responsive conducting polymer to be used as general drug delivery systems. It allows on-demand release of incorporated drug is kinetically investigated in real time.

Methods

Online spectroscopic monitoring was used to investigate the electrochemically/thermally controlled release behavior of a model drug (naproxen) from drug-doped polypyrrole (DDPPy) film. Avrami’s equation has been used to study the kinetics and further analyzing has been carried out using the Arrhenius and the Eyring equations. Furthermore, drug release behavior, with two other electrochemical techniques was investigated.

Results

It was observed both temperature and electrical stimuli increase the rate of release while electrical potential has a greater effect as revealed in the values of release rate constant (from 0.0068 to 0.018 min^?1 at 37°C). It was also shown that a linear relationship exists between the applied electrical potentials and release activation parameters.

Conclusion

The electronic properties of the conducting polymer has an important role in release kinetics, there might be a single mechanism with the same limiting step. In addition, it was demonstrated the rate of drug release from DDPPy dramatically depends on the amounts as well as modes of applying potential which provides enhanced control of drug-release kinetics which can be accelerated or even sustained.

     

Physicochemical Properties of Solid Phospholipid Particles as a Drug Delivery Platform for Improving Oral Absorption of Poorly Soluble Drugs

Purpose

A novel drug delivery platform, mesoporous phospholipid particle (MPP), is introduced. Its physicochemical properties and ability as a carrier for enhancing oral absorption of poorly soluble drugs are discussed.

Methods

MPP was prepared through freeze-drying a cyclohexane/t-butyl alcohol solution of phosphatidylcholine. Its basic properties were revealed using scanning electron microscopy, x-ray diffraction, thermal analysis, hygroscopicity measurement, and so on. Fenofibrate was loaded to MPP as a poorly soluble model drug, and effect of MPP on the oral absorption behavior was observed.

Results

MPP is spherical in shape with a diameter typically in the range of 10–15 μm and a wide surface area that exceeds 10 m²/g. It has a bilayer structure that may accommodate hydrophobic drugs in the acyl chain region. When fenofibrate was loaded in MPP as a model drug, it existed partially in a crystalline state and improvement in the dissolution behavior was achieved in the presence of a surfactant, because of the formation of mixed micelles composed of phospholipids and surfactants in the dissolution media. MPP greatly improved the oral absorption of fenofibrate compared to that of the crystalline drug and its efficacy was almost equivalent to that of an amorphous drug dispersion.

Conclusion

MPP is a promising option for improving the oral absorption of poorly soluble drugs based on the novel mechanism of dissolution improvement.