Drug Release from ß-Cyclodextrin Complexes and Drug Transfer into Model Membranes Studied by Affinity Capillary Electrophoresis

Purpose

Is to characterize the drug release from the ß-cyclodextrin (ß-CD) cavity and the drug transfer into model membranes by affinity capillary electrophoresis. Phospholipid liposomes with and without cholesterol were used to mimic the natural biological membrane.

Methods

The interaction of cationic and anionic drugs with ß-CD and the interaction of the drugs with liposomes were detected separately by measuring the drug mobility in ß-CD containing buffer and liposome containing buffer; respectively. Moreover, the kinetics of drug release from ß-CD and its transfer into liposomes with or without cholesterol was studied by investigation of changes in the migration behaviours of the drugs in samples, contained drug, ß-CD and liposome, at 1:1:1 molar ratio at different time intervals; zero time, 30 min, 1, 2, 4, 6, 8, 10 and 24 h. Lipophilic drugs such as propranolol and ibuprofen were chosen for this study, because they form complexes with ß-CD.

Results

The mobility of the both drug liposome mixtures changed with time to a final state. For samples of liposomal membranes with cholesterol the final state was faster reached than without cholesterol.

Conclusions

The study confirmed that the drug release from the CD cavity and its transfer into the model membrane was more enhanced by the competitive displacement of the drug from the ß-CD cavity by cholesterol, the membrane component. The ACE method here developed can be used to optimize the drug release from CD complexes and the drug transfer into model membranes.

     

Quantitative <Emphasis Type="BoldItalic">In Vitro</Emphasis> Assessment of Liposome Stability and Drug Transfer Employing Asymmetrical Flow Field-Flow Fractionation (AF4)

Purpose

In the present study we introduce an efficient approach for a size-based separation of liposomes from plasma proteins employing AF4. We investigated vesicle stability and release behavior of the strongly lipophilic drug temoporfin from liposomes in human plasma for various incubation times at 37°C.

Methods

We used the radioactive tracer cholesteryl oleyl ether (COE) or dipalmitoyl-phosphocholine (DPPC) as lipid markers and ¹⁴C-labeled temoporfin. First, both lipid labels were examined for their suitability as liposome markers. Furthermore, the influence of plasma origin on liposome stability and drug transfer was investigated. The effect of membrane fluidity and PEGylation on vesicle stability and drug release characteristics was also analyzed.

Results

Surprisingly, we observed an enzymatic transfer of ³H-COE to lipoproteins due to the cholesterol ester transfer protein (CETP) in human plasma in dependence on membrane rigidity and were able to inhibit this transfer by plasma preincubation with the CETP inhibitor torcetrapib. This effect was not seen when liposomes were incubated in rat plasma. DPPC labels suffered from hydrolysis effects during preparation and/or storage. Fluid liposomes were less stable in human plasma than their PEGylated analogues or a rigid formulation. In contrast, the transfer of the incorporated drug to lipoproteins was higher for the rigid formulations.

Conclusions

The observed effects render COE-labels questionable for in vivo studies using CEPT-rich species. Here, choline labelled ¹⁴C-DPPC was found to be the most promising alternative. Bilayer composition has a high influence on stability and drug release of a liposomal formulation in human plasma.

     

Electrosprayed Myocet-like Liposomes: An Alternative to Traditional Liposome Production

Purpose

Although doxorubicin (DXR) has been on the market for many years as an anti-cancer drug, a number of serious dose-limiting toxicities hinder its widespread use. To reduce the known toxicities of soluble DXR, various liposomes have been designed including Doxil, Caelyx, and Myocet. Myocet, a non-PEGylated liposomal formulation containing DXR, was found to reduce the toxicities associated with soluble DXR and has been used in Europe and Canada (but not the US) as a first line therapy. While regarded as successful, Myocet does have some formulation drawbacks including stability, drug release, and an arduous formulation and remote loading method for preparation.

Methods

Our lab has developed a liposomal electrospray process in which formulation and remote loading occurs continuously in one step, cutting down on the total time of production and increasing the drug retention in the liposomes with respect to more conventional methods. Electrosprayed Myocet-like liposomes were then tested in vitro for release kinetics and cytotoxicity with respect to a more conventional formulation method.

Results

Myocet-like liposomes manufactured via electrospray had similar DXR loadings, hydrodynamic diameters, morphologies, and cytotoxic profiles as their thin-film hydration counterparts, but their release profiles were drastically prolonged.

Conclusions

Our findings indicate that electrospray is a viable manufacturing procedure to scalably produce Myocet-like liposomes that appear to be more stable than those formulated through thin-film hydration.

     

Novel Core-Interlayer-Shell DOX/ZnPc Co-loaded MSNs@ pH-Sensitive CaP@PEGylated Liposome for Enhanced Synergetic Chemo-Photodynamic Therapy

Purpose

This work was intended to develop novel doxorubicin (DOX)/zinc (II) phthalocyanine (ZnPc) co-loaded mesoporous silica (MSNs)@ calcium phosphate (CaP)@PEGylated liposome nanoparticles (NPs) that could efficiently achieve collaborative anticancer therapy by the combination of photodynamic therapy (PDT) and chemotherapy. The interlayer of CaP could be utilized to achieve pH-triggered controllable drug release, promote the cellular uptake, and induce cell apoptosis to further enhance the anticancer effects.

Methods

MSNs were first synthesized as core particles in which the pores were diffusion-filled with DOX, then the cores were coated by CaP followed by the liposome encapsulation with ZnPc to form the final DOX/ZnPc co-loaded MSNs@CaP@PEGylated liposome.

Results

A core-interlayer-shell MSNs@CaP@PEGylated liposomes was developed as a multifunctional theranostic nanoplatform. In vitro experiment indicated that CaP could not only achieve pH-triggered controllable drug release, promote the cellular uptake of the NPs, but also generate high osmotic pressure in the endo/lysosomes to induce cell apoptosis. Besides, the chemotherapy using DOX and PDT effect was achieved by the photosensitizer ZnPc. Furthermore, the MSNs@CaP@PEGylated liposomes showed outstanding tumor-targeting ability by enhanced permeability and retention (EPR) effect.

Conclusions

The novel prepared MSNs@CaP@PEGylated liposomes could serve as a promising multifunctional theranostic nanoplatform in anticancer treatment by synergic chemo-PDT and superior tumor-targeting ability.

     

Investigation of the Discriminatory Ability of Pharmacokinetic Metrics for the Bioequivalence Assessment of PEGylated Liposomal Doxorubicin

Purpose

The purpose of the study was to construct a population pharmacokinetic model for pegylated liposomal doxorubicin and use the final model to investigate the discrimination performance of pharmacokinetic metrics (e.g., C_max, AUC and partial AUC) of various analytes (e.g., liposome encapsulated doxorubicin, free doxorubicin and total doxorubicin) for the identification of formulation differences by means of Monte Carlo simulations.

Methods

A model was simultaneously built to characterize the concentration time profiles of liposome-encapsulated doxorubicin and free doxorubicin using NONMEM. The different scenarios associated with changes in release rate (Rel) were simulated based on the final parameters. 500 simulated virtual bioequivalence (BE) studies were performed for each scenario, and power curves for the probability of declaring BE were also computed.

Results

The concentration time profiles of liposome-encapsulated doxorubicin and free doxorubicin were well described by a one- and two-compartment model, respectively. pAUC_0-24 h and pAUC_0-48 h of free doxorubicin was most responsive to changes in the Rel when the Rel (test)/Rel (reference) ratios decreased. In contrast, when the Rel (test) increased, AUC_0-t of liposome-encapsulated doxorubicin was the most responsive metric.

Conclusions

In addition to the traditional metrics, partial AUC should be included for the BE assessment of pegylated liposomal doxorubicin.

     

Co-Delivery of Ciprofloxacin and Colistin in Liposomal Formulations with Enhanced <Emphasis Type="BoldItalic">In Vitro</Emphasis> Antimicrobial Activities against Multidrug Resistant <Emphasis Type="BoldItalic">Pseudomonas aeruginosa</Emphasis>

Purpose

This study aims to develop liposomal formulations containing synergistic antibiotics of colistin and ciprofloxacin for the treatment of infections caused by multidrug-resistant Pseudomonas aeruginosa.

Methods

Colistin (Col) and ciprofloxacin (Cip) were co-encapsulated in anionic liposomes by ammonium sulfate gradient. Particle size, encapsulation efficiency, in vitro drug release and in vitro antibiotic activities were evaluated.

Results

The optimized liposomal formulation has uniform sizes of approximately 100 nm, with encapsulation efficiency of 67.0% (for colistin) and 85.2% (for ciprofloxacin). Incorporation of anionic lipid (DMPG) markedly increased encapsulation efficiency of colistin (from 5.4 to 67.0%); however, the encapsulation efficiency of ciprofloxacin was independent of DMPG ratio. Incorporation of colistin significantly accelerated the release of ciprofloxacin from the DMPG anionic liposomes. In vitro release of ciprofloxacin and colistin in the bovine serum for 2 h were above 70 and 50%. The cytotoxicity study using A549 cells showed the liposomal formulation is as non-toxic as the drug solutions. Liposomal formulations of combinations had enhanced in vitro antimicrobial activities against multidrug resistant P. aeruginosa than the monotherapies.

Conclusions

Liposomal formulations of two synergistic antibiotics was promising against multidrug resistant P. aeruginosa infections.

     

Combined Used of Rheology and LF-NMR for the Characterization of PVP-Alginates Gels Containing Liposomes

Purpose

This paper is based on the characterization of the rheological and Low Field NMR (LF-NMR) properties of an interpenetrated hydrogel made up by poly(N-vinyl-2-pyrrolidone) and sodium alginate. The final aim is to use the hydrogel as a delivery matrix for liposomes, widely used tools in the drug delivery field.

Methods

Rheology, LF-NMR, TEM, cryo-TEM, confocal laser scanning microscopy and release test were employed to characterize the interpenetrated hydrogel. Different theoretical approaches such as Flory, Chui, Scherer and Schurz theories were used to interpret the experimental results.

Results

We found that the crosslinking mechanisms of the two polymers produced an anti-synergistic effect on the final mechanical properties of the interpenetrated hydrogel. Instead of creating a continuous network, alginate formed isolated, cross-linked, clusters embedded in a continuous network of poly(N-vinyl-2-pyrrolidone). Additionally, gel structure significantly influenced liposome delivery.

Conclusions

The rheological and LF-NMR characterization were confirmed and supported by the independent techniques TEM, cryo-TEM and release tests Thus, our findings reiterate the potentiality of both rheology and LF-NMR for the characterisation of soft materials such as interpenetrated polymeric networks.

     

Application of Lipid Blend-Based Nanoparticulate Scaffold for Oral Delivery of Antihypertensive Drug: Implication on Process Variables and In Vivo Absorption Assessment

Purpose

The aim of the present study was to formulate and optimize lipid blend-based olmesartan medoxomil (OLM) loaded nanoparticulate scaffolds (NLCs) for enhanced oral bioavailability.

Method

The OLM-NLCs were formulated using dependent variables in different concentrations of solid lipid, liquid lipid, surfactant, and co-surfactant by using melt emulsification combined with ultrasonication technique. The formulations were experimentally optimized using a three-factor, three-level statistical design approach. The formulated OLM-NLCs were evaluated for various pharmaceutical quality evaluation parameters and further optimized formulation (OLM-NLCopt) was assessed for release kinetics, thermal behavior, and in vivo absorption assessment.

Result

The optimized formulation (OLM-NLCopt) showed particle size (138.7 nm), PDI (0.18), and entrapment efficiency (83.65%). The comparative in vitro release study revealed OLM-NLCopt showed significantly higher (p?<?0.05) drug release compare to OLM-susp. The in vivo study showed the OLM-NLCopt indicated nearly 3-fold improvement in oral bioavailability vis-a-vis OLM-susp in mice model.

Conclusion

The results of the release study and pharmacokinetic study suggest the potential of OLM-NLCs for improved oral delivery.

     

Comparison of Dialysis- and Solvatofluorochromism-Based Methods to Determine Drug Release Rates from Polymer Nanoassemblies

Purpose

To compare traditional dialysis- and novel solvatofluorochromism (SFC)-based methods for accurate determination of drug release profiles for nanoparticle drug carriers.

Methods

Polymer nanoassemblies (PNAs) varying in drug release patterns were prepared using poly(ethylene glycol), poly(ethylenimine), hydrophobic excipients (palmitate and deoxycholate), and model hydrophobic anticancer drugs with clinical relevance (carfilzomib and docetaxel). Nile blue (NB) was used as a model SFC dye quenching fluorescence in water yet emitting strong fluorescence in the presence of hydrophobic drugs within PNAs. Drug release kinetics were measured by dialysis- and SFC-based methods, and analyzed by mathematical modeling of free drug, spiked drug, and encapsulated drug release.

Results

The dialysis method overestimated drug remaining in PNAs because it included released drug in measurements, whereas the SFC method successfully distinguished drugs entrapped in PNAs from released in solution and thus provided more accurate drug release patterns. However, mathematical modeling revealed that the dialysis method would be less influenced than the SFC method by hydrophobic excipients modulating drug diffusion within PNAs.

Conclusions

In comparison to the dialysis-based method, the SFC-based method would allow for real-time spectroscopic determination of drug release from PNAs and potentially other nanoparticle drug carriers with improved convenience and accuracy.

     

Online Spectroscopic Monitoring of Drug Release Kinetics from Nanostructured Dual-Stimuli-Responsive Conducting Polymer

Purpose

The potential of electrochemical/temperature dual stimuli-responsive conducting polymer to be used as general drug delivery systems. It allows on-demand release of incorporated drug is kinetically investigated in real time.

Methods

Online spectroscopic monitoring was used to investigate the electrochemically/thermally controlled release behavior of a model drug (naproxen) from drug-doped polypyrrole (DDPPy) film. Avrami’s equation has been used to study the kinetics and further analyzing has been carried out using the Arrhenius and the Eyring equations. Furthermore, drug release behavior, with two other electrochemical techniques was investigated.

Results

It was observed both temperature and electrical stimuli increase the rate of release while electrical potential has a greater effect as revealed in the values of release rate constant (from 0.0068 to 0.018 min^?1 at 37°C). It was also shown that a linear relationship exists between the applied electrical potentials and release activation parameters.

Conclusion

The electronic properties of the conducting polymer has an important role in release kinetics, there might be a single mechanism with the same limiting step. In addition, it was demonstrated the rate of drug release from DDPPy dramatically depends on the amounts as well as modes of applying potential which provides enhanced control of drug-release kinetics which can be accelerated or even sustained.

     

Effect of Nanoparticle Surface on the HPLC Elution Profile of Liposomal Nanoparticles

Purpose

Nanoparticles have been used in diverse areas, and even broader applications are expected in the future. Since surface modification can influence the configuration and toxicity of nanoparticles, a rapid screening method is important to ensure nanoparticle quality.

Methods

We examined the effect of the nanoparticle surface morphology on the HPLC elution profile using two types of 100-nm liposomal nanoparticles (AmBisome^? and DOXIL^?).

Results

These 100-nm-sized nanoparticles eluted before the holdup time (about 4 min), even when a column packed with particles with a relatively large pore size (30 nm) was used. The elution time of the nanoparticles increased with pegylation of the nanoparticles and protein adsorption to the nanoparticles; however, the nanoparticles still eluted before the holdup time.

Conclusions

The results of this study indicate that HPLC is a suitable tool for rapid evaluation of the surface of liposomal nanoparticles.

     

Membrane Loaded Copper Oleate PEGylated Liposome Combined with Disulfiram for Improving Synergistic Antitumor Effect <Emphasis Type="BoldItalic">In Vivo</Emphasis>

Purpose

This work aims to create a novel Cu²⁺ liposome with excellent loading stability and develop synergistic effect with disulfiram (DSF) for the treatment of tumor.

Methods

Copper oleate was incorporated into the liposome membrane via alcohol injection method in this work. In vitro release test was applied to evaluate the release profile of the liposomes. Pharmacokinetic studies were performed in rats and the antitumor efficacy was assessed in mice bearing hepatoma xenografts.

Results

The copper oleate liposome (Cu(OI)₂-L) was formulated and the loading efficiency were more than 85%. TEM images confirmed that the Cu(OI)₂-L had a spherical morphology with an average diameter of 100 nm. Cu(OI)₂-L displayed a biphasic release profile, with >70% retained drug over 8 h incubation in PBS at pH 7.4. Pharmacokinetic studies demonstrated that Cu(OI)₂-L had a prolonged circulation time and increased AUC when compared to the injection of copper oleate solution. The antitumor efficacy test demonstrated an enhanced tumor inhibition rate with the treatment of Cu(OI)₂-L and DSF nanoparticles, indicating an improved synergistic antitumor effect.

Conclusions

The Cu(OI)₂-L was suitable to be employed in combination with disulfiram for tumor treatment and can also open up opportunities for targeted delivery of copper.

     

Real-Time UV Imaging of Nicotine Release from Transdermal Patch

Purpose

This study was conducted to characterize UV imaging as a platform for performing in vitro release studies using Nicorette® nicotine patches as a model drug delivery system.

Methods

The rate of nicotine release from 2 mm diameter patch samples (Nicorette®) into 0.067 M phosphate buffer, pH 7.40, was studied by UV imaging (Actipix SDI300 dissolution imaging system) at 254 nm. The release rates were compared to those obtained using the paddle-over-disk method.

Results

Calibration curves were successfully established which allowed temporally and spatially resolved quantification of nicotine. Release profiles obtained from UV imaging were in qualitative agreement with results from the paddle-over-disk release method.

Conclusion

Visualization as well as quantification of nicotine concentration gradients was achieved by UV imaging in real time. UV imaging has the potential to become an important technology platform for conducting in vitro drug release studies.

     

Liposomal Irinotecan Accumulates in Metastatic Lesions,Crosses the Blood-Tumor Barrier (BTB), and Prolongs Survival in an Experimental Model of Brain Metastases of Triple Negative Breast Cancer

Purpose

The blood-tumor barrier (BTB) limits irinotecan distribution in tumors of the central nervous system. However, given that the BTB has increased passive permeability we hypothesize that liposomal irinotecan would improve local exposure of irinotecan and its active metabolite SN-38 in brain metastases relative to conventional irinotecan due to enhanced-permeation and retention (EPR) effect.

Methods

Female nude mice were intracardially or intracranially implanted with human brain seeking breast cancer cells (brain metastases of breast cancer model). Mice were administered vehicle, non-liposomal irinotecan (50 mg/kg), liposomal irinotecan (10 mg/kg and 50 mg/kg) intravenously starting on day 21. Drug accumulation, tumor burden, and survival were evaluated.

Results

Liposomal irinotecan showed prolonged plasma drug exposure with mean residence time (MRT) of 17.7 ± 3.8 h for SN-38, whereas MRT was 3.67 ± 1.2 for non-liposomal irinotecan. Further, liposomal irinotecan accumulated in metastatic lesions and demonstrated prolonged exposure of SN-38 compared to non-liposomal irinotecan. Liposomal irinotecan achieved AUC values of 6883 ± 4149 ng-h/g for SN-38, whereas non-liposomal irinotecan showed significantly lower AUC values of 982 ± 256 ng-h/g for SN-38. Median survival for liposomal irinotecan was 50 days, increased from 37 days (p<0.05) for vehicle.

Conclusions

Liposomal irinotecan accumulates in brain metastases, acts as depot for sustained release of irinotecan and SN-38, which results in prolonged survival in preclinical model of breast cancer brain metastasis.

     

Controlled Release from Zein Matrices: Interplay of Drug Hydrophobicity and pH

Purpose

In earlier studies, the corn protein zein is found to be suitable as a sustained release agent, yet the range of drugs for which zein has been studied remains small. Here, zein is used as a sole excipient for drugs differing in hydrophobicity and isoelectric point: indomethacin, paracetamol and ranitidine.

Methods

Caplets were prepared by hot-melt extrusion (HME) and injection moulding (IM). Each of the three model drugs were tested on two drug loadings in various dissolution media. The physical state of the drug, microstructure and hydration behaviour were investigated to build up understanding for the release behaviour from a zein based matrix for drug delivery.

Results

Drug crystallinity of the caplets increases with drug hydrophobicity. For ranitidine and indomethacin, swelling rates, swelling capacity and release rates were pH dependent as a consequence of the presence of charged groups on the drug molecules. Both hydration rates and release rates could be approached by existing models.

Conclusion

The drug state and pH dependant electrostatic interactions are hypothesised to influence release kinetics. Both factors can potentially be used to influence release kinetics release, thereby broadening the horizon for zein as a tuneable release agent.

     

An Investigation into Formulation and Processing Strategies to Drive Gastroretention of Gabapentin Tablets

Purpose

The aim of the present work was to develop gastroretentive drug delivery system of gabapentin from different matrices prepared by hot melt or conventional wet granulation, which may enhance drug bioavailability. The influence of core type, granulation process, and coating level on the drug release rates was investigated.

Methods

Tablet cores were prepared from hydrophilic system of hypermellose, carboxy melthyl celloulse, and Avicel or hydrophobic system of ethyl cellulose, alginic acid, and stearic acid. The tablets were coated by Eudragit RL with triethyl citrate and compressed directly. These tablets were evaluated according to their in vitro dissolution profiles and release mechanisms.

Results

Hydrophobic matrices allowed the control of drug release. Hot melt granulation was an effective tool over wet granulation or coating for slowing release rates from hydrophobic tablets. Both hydrophobic polymer ratio and coating level influenced the drug release mechanism. The drug release of samples with minor proportion of ethyl cellulose and stearic acid or low Eudragit RL level was driven by anomalous transport and the increase of their proportions contributed to the erosion of the matrix.

Conclusions

Hydrophobic core tablet prepared from hot melt granulation and coated by Eudragit RL has shown to be a promising formulation intended to gastroretentive gabapentin delivery system.

     

Controlling Release of Integral Lipid Nanoparticles Based on Osmotic Pump Technology

Purpose

To achieve controlled release of integral nanoparticles by the osmotic pump strategy using nanostructured lipid carriers (NLCs) as model nanoparticles.

Methods

NLCs was prepared by a hot-homogenization method, transformed into powder by lyophilization, and formulated into osmotic pump tablets (OPTs). Release of integral NLCs was visualized by live imaging after labeling with a water-quenching fluorescent probe. Effects of formulation variables on in vitro release characteristics were evaluated by measuring the model drug fenofibrate. Pharmacokinetics were studied in beagle dogs using the core tablet and a micronized fenofibrate formulation as references.

Results

NLCs are released through the release orifices of the OPTs as integral nanoparticles. Near zero-order kinetics can be achieved by optimizing the influencing variables. After oral administration, decreased C _max and steady drug levels for as long as over 24 h are observed. NLC-OPTs show an oral bioavailability of the model drug fenofibrate similar to that of the core tablets, which is about 1.75 folds that of a fast-release formulation.

Conclusion

Controlled release of integral NLCs is achieved by the osmotic pump strategy.

     

<Emphasis Type="BoldItalic">In Vitro</Emphasis> Skin Retention and Drug Permeation through Intact and Microneedle Pretreated Skin after Application of Propranolol Loaded Microemulsions

Purpose

Topical beta-blockers are efficacious for treating infantile hemangiomas, but no formulations have been specifically optimized for skin delivery. Our objective was to quantify skin concentrations and drug permeation of propranolol (a nonselective beta-blocker) after application of microemulsions to intact and microneedle pretreated skin.

Methods

Four propranolol-loaded microemulsions were characterized for droplet size, surface charge, conductivity, pH, drug solubility, and drug release. Skin concentrations and drug permeation through skin were quantified using LC-MS. Skin-to-receiver ratios were used to compare the microemulsion formulations to a drug-in-PBS solution.

Results

Propranolol solubility was significantly greater in microemulsions vs PBS. Cumulative drug release from the microemulsions over 24 h ranged from 13 to 26%. Skin concentrations and drug permeation through intact skin was significantly higher from PBS; however, the skin-to-receiver ratios were significantly higher for water-rich microemulsions compared to PBS or surfactant-rich microemulsions. Microneedle pretreatment significantly increased skin concentrations for all formulations. Skin-to-receiver ratios significantly increased after microneedle pretreatment for surfactant-rich microemulsions.

Conclusions

Microemulsion formulation can be altered to elicit different drug delivery profiles through MN-treated skin. This could be advantageous for maximizing local skin drug concentrations and improving dosing schedules for infantile hemangioma treatment.

     

HPMC-Eudragit-Based Gastro-retentive Hydrodynamically Balanced System—Suitable for Sparingly Soluble and Freely Soluble Drugs: an In Vitro Study

Purpose

In this study HPMC-eudragit based hydrodynamically balanced capsules of two model drugs; propranolol HCl and ofloxacin were prepared with the aim to have the gastric retention of the systems for longer periods of time with desired sustained/ controlled drug release.

Methods

Gastro-retentive capsules were prepared by simple physical blending of various low density polymers and filling into capsules. These capsules were subjected to in vitro buoyancy/ matrix integrity and dissolution studies. Weight variation, content uniformity test, UV spectral analysis and placebo interaction studies were also performed.

Results

Preliminary studies revealed that high soluble drug required higher polymer ratios to sustain drug release and maintain matrix integrity/ buoyancy than low soluble drug. In both the cases, with increase in HPMC and eudragit S100 levels there was an increase in matrix integrity and decrease in drug release rate, however much higher levels of eudragit S100 decreased matrix integrity and buoyancy. Lactose (release rate modifier) decreased matrix integrity, buoyancy and increased drug release. Mechanism of release in the both cases was found to be anomalous "non-fickian".

Conclusion

From this research and the literature available on the eudragit and HPMC matrix systems, it is evident that different categories of drugs (suitable for gastric retention), ranging from freely soluble to sparingly soluble can be suitably formulated as HPMCeudragit based GR HBS capsules with desired drug release characteristics, provided no chemical instability/ incompatibility occurs between the drug and the polymers.

     

Photochemically Controlled Drug Dosing from a Polymeric Scaffold

Purpose

To develop the first photoactive biomaterial coating capable of controlled drug dosing via inclusion of synthesised drug-3,5-dimethoxybenzoin (DMB) conjugates in a poly(2-methyoxyethyl acrylate) (pMEA) scaffold.

Methods

Flurbiprofen- and naproxen-DMB conjugates were prepared via esterification and characterised via NMR spectroscopy and mass spectrometry following chromatographic purification. Conjugate photolysis was investigated in acetonitrile solution and within the pMEA matrix following exposure to low-power 365 nm irradiation. Photo-liberation of drug from pMEA into phosphate buffered saline was monitored using UV-vis spectroscopy.

Results

The synthetic procedures yielded the desired drug conjugates with full supporting characterisation. Drug regeneration through photolysis of the synthesised conjugates was successful in both acetonitrile solution and within the pMEA scaffold upon UV irradiation. Conjugates were retained within the pMEA scaffold with exclusive drug liberation following irradiation and increased drug dose with increasing exposure. Multi-dosing capacity was demonstrated though the ability of successive irradiation periods to generate further bursts of drug.

Conclusion

This study demonstrates the first application of photochemically controlled drug release from a biomaterial coating and the feasibility of using pMEA as a scaffold for housing the photoactive drug-DMB conjugates.