<Emphasis Type="BoldItalic">In Vitro</Emphasis> and <Emphasis Type="BoldItalic">In Vivo</Emphasis> Drug Release from a Novel <Emphasis Type="BoldItalic">In Situ</Emphasis> Forming Drug Delivery System

Purpose The objective of this work was to investigate the influence of various preparation and formulation parameters on the in vitro and in vivo release of bupivacaine hydrochloride from an injectable in situ forming microparticle system (ISM). Methods The in vitro drug release of ISM was investigated as a function of various formulation and process parameters and was compared to the drug release from in situ forming implants and conventional microparticles. In vivo studies were carried out in male Sprague–Dawley rats. Results Upon contact with an aqueous medium, the internal polymer phase of the ISM system solidified and formed microparticles. The initial drug release from ISM systems was reduced with decreasing polymer phase/external oil phase ratio. An advantage of the ISM system compared to in situ implant systems was the significantly reduced burst effect, resulting in drug release profiles comparable to microparticles prepared by conventional methods. The in vivo drug release studies were in good agreement with the in vitro drug release. With the ISM system, the analgesic effect of the bupivacaine hydrochloride was prolonged when compared to the injection of a drug solution or drug-polymer solution. Conclusions ISM are an attractive alternative for parenteral drug delivery systems.     

Equivalence-by-Design: Targeting <Emphasis Type="BoldItalic">In Vivo</Emphasis> Drug Delivery Profile

In the United States (U.S.), drug products are considered therapeutically equivalent if they meet regulatory criteria of pharmaceutical equivalence and bioequivalence. These requirements can be traced back to 1977 when the U.S. Food and Drug Administration (FDA) published the regulations on bioavailability and bioequivalence. Over the years, to keep up with the advancement in science and technology, the FDA has been constantly updating the regulatory approaches to assessing and ensuring equivalence. In view of the recent growth in novel pharmaceutical dosage forms and delivery systems, this paper examines the current framework for documentation of therapeutic equivalence and explores the opportunities of further advancing equivalence methods for complex drug products. It is proposed that equivalence may be established by matching the in vivo drug delivery profile (iDDP) between drug products in comparison. This can be achieved by characterizing the iDDP of the reference formulation with application of an equivalence-by-design approach for pharmaceutical development. Critical variables can be identified to serve as in vitro markers or biomarkers for mapping the desired drug delivery profile in vivo. A multidisciplinary approach may be necessary to develop these markers for characterization of iDDPs. The opinions expressed in this article do not necessarily represent the views or policies of the U.S. Food and Drug Administration     

PEGylated PAMAM Dendrimer-Doxorubicin Conjugates: <Emphasis Type="BoldItalic">In Vitro</Emphasis> Evaluation and <Emphasis Type="BoldItalic">In Vivo</Emphasis> Tumor Accumulation

Purpose  

To investigate the effects of PEGylation degree and drug conjugation style on the in vitro and in vivo behavior of PEGylated polyamidoamine (PAMAM) dendrimers-based drug delivery system.     

Characterization of Temperature Profiles in Skin and Transdermal Delivery System When Exposed to Temperature Gradients <Emphasis Type="BoldItalic">In Vivo</Emphasis> and <Emphasis Type="BoldItalic">In Vitro</Emphasis>

Purpose

Performance of a transdermal delivery system (TDS) can be affected by exposure to elevated temperature, which can lead to unintended safety issues. This study investigated TDS and skin temperatures and their relationship in vivo, characterized the effective thermal resistance of skin, and identified the in vitro diffusion cell conditions that would correlate with in vivo observations.

Methods

Experiments were performed in humans and in Franz diffusion cells with human cadaver skin to record skin and TDS temperatures at room temperature and with exposure to a heat flux. Skin temperatures were regulated with two methods: a heating lamp in vivo and in vitro, or thermostatic control of the receiver chamber in vitro.

Results

In vivo basal skin temperatures beneath TDS at different anatomical sites were not statistically different. The maximum tolerable skin surface temperature was approximately 42–43°C in vivo. The temperature difference between skin surface and TDS surface increased with increasing temperature, or with increasing TDS thermal resistance in vivo and in vitro.

Conclusions

Based on the effective thermal resistance of skin in vivo and in vitro, the heating lamp method is an adequate in vitro method. However, the in vitro-in vivo correlation of temperature could be affected by the thermal boundary layer in the receiver chamber.

     

Dynamic Dissolution Testing To Establish <Emphasis Type="BoldItalic">In Vitro</Emphasis>/<Emphasis Type="BoldItalic">In Vivo</Emphasis> Correlations for Montelukast Sodium,a Poorly Soluble Drug

Purpose  The objectives of the study was to develop a dissolution test method that can be used to predict the oral absorption of montelukast sodium, and to establish an in vitro/in vivo correlation (IVIVC) using computer simulations. Methods  Drug solubility was measured in different media. The dissolution behaviour of montelukast sodium 10 mg film coated tablets was studied using the flow-through cell dissolution method following a dynamic pH change protocol, as well as in the USP Apparatus 2. Computer simulations were performed using GastroPlus™. Biorelevant dissolution media (BDM) prepared using bile salts and lecithin in buffers was used as the dissolution media, as well as the USP simulated intestinal fluid (SIF) pH 6.8 and blank FaSSIF pH 6.5. Dissolution tests in the USP Apparatus 2 were performed under a constant pH condition, while the pH range used in the flow through cells was pH 2.0 to 7.5. The in vitro data were used as input functions into GastroPlus™ to simulate the in vivo profiles of the drug. Results  The solubility of montelukast sodium was low at low pH, but increased as the pH was increased. There was no significant difference in solubility in the pH range of 5.0 to 7.5 in blank buffers, but the drug solubility was higher in biorelevant media compared with the corresponding blank buffers at the same pH. Using the flow through cells, the dissolution rate was fast in simulated gastric fluid containing 0.1% SLS. The dissolution rate slowed down when the medium was changed to FaSSIF pH 6.5 and increased when the medium was changed to FaSSIF medium at pH 7.5. In the USP Apparatus 2, better dissolution was observed in FaSSIF compared with the USP buffers and blank FaSSIF with similar pH values. Dissolution was incomplete with less than 10% of the drug dissolved in the USP-SIF, and was practically non existent in blank FaSSIF pH 6.5. The in vitro results of the dynamic dissolution test were able to predict the clinical data from a bioavailability study best. Conclusions  Dynamic dissolution testing using the flow through cell seems to be a powerful tool to establish in vitro/in vivo correlations for poorly soluble drugs as input function into GastroPlus.     

<Emphasis Type="BoldItalic">In Vitro</Emphasis> and <Emphasis Type="BoldItalic">In Vivo</Emphasis> Release of Vascular Endothelial Growth Factor from Gelatin Microparticles and Biodegradable Composite Scaffolds

PURPOSE: This work evaluated gelatin microparticles and biodegradable composite scaffolds for the controlled release of vascular endothelial growth factor (VEGF) in vitro and in vivo. METHODS: Gelatin crosslinking, VEGF dose, and buffer type were investigated for their effects on VEGF release. Release was also evaluated from microparticles confined within porous polymer scaffolds (composites). In vitro and in vivo studies were conducted using radiolabeled VEGF. RESULTS: The effect of VEGF dose on its fractional release from gelatin microparticles in vitro was minimal, but the addition of collagenase to the buffer resulted in a higher cumulative release of VEGF. Gelatin crosslinking extent was a significant factor on release from both microparticles alone and composite scaffolds in vitro and in vivo. VEGF bioactivity from composite scaffolds in vitro was maintained above 90% of the expected bioactivity over 14 days. CONCLUSIONS: VEGF release kinetics were dependent on the extent of gelatin crosslinking and were characteristic of the specific growth factor due to the effects of growth factor size, charge, and conformation on its complexation with gelatin. These studies demonstrate the utility of gelatin microparticles and their composite scaffolds as delivery vehicles for the controlled release of VEGF for tissue engineering applications.     

A Novel Gastro-Retentive Osmotic Pump Capsule Using Asymmetric Membrane Technology: <Emphasis Type="BoldItalic">In Vitro</Emphasis> and <Emphasis Type="BoldItalic">In Vivo</Emphasis> Evaluation

Purpose  

The purpose of this paper is to develop a novel gastro-retentive osmotic pump capsule using asymmetric membrane technology.     

<Emphasis Type="BoldItalic">In Vitro</Emphasis> and <Emphasis Type="BoldItalic">In Vivo</Emphasis> Modeling of Hydroxypropyl Methylcellulose (HPMC) Matrix Tablet Erosion Under Fasting and Postprandial Status

Purpose

To develop a model linking in vitro and in vivo erosion of extended release tablets under fasting and postprandial status.

Methods

A nonlinear mixed-effects model was developed from the in vitro erosion profiles of four hydroxypropyl methylcellulose (HPMC) matrix tablets studied under a range of experimental conditions. The model was used to predict in vivo erosion of the HPMC matrix tablets in different locations of the gastrointestinal tract, determined by magnetic marker monitoring. In each gastrointestinal segment the pH was set to physiological values and mechanical stress was estimated in USP2 apparatus rotation speed equivalent.

Results

Erosion was best described by a Michaelis–Menten type model. The maximal HPMC release rate (V_MAX) was affected by pH, mechanical stress, HPMC and calcium hydrogen phosphate content. The amount of HPMC left at which the release rate is half of V_MAX depended on pH and calcium hydrogen phosphate. Mechanical stress was estimated for stomach (39.5 rpm), proximal (93.3 rpm) and distal (31.1 rpm) small intestine and colon (9.99 rpm).

Conclusions

The in silico model accurately predicted the erosion profiles of HPMC matrix tablets under fasting and postprandial status and can be used to facilitate future development of extended release tablets.

     

Lipid-based Formulations for Danazol Containing a Digestible Surfactant,Labrafil M2125CS: <Emphasis Type="BoldItalic">In Vivo</Emphasis> Bioavailability and Dynamic <Emphasis Type="BoldItalic">In Vitro</Emphasis> Lipolysis

Purpose

To evaluate the use of Labrafil® M2125CS as a lipid vehicle for danazol. Further, the possibility of predicting the in vivo behavior with a dynamic in vitro lipolysis model was evaluated.

Methods

Danazol (28 mg/kg) was administered orally to rats in four formulations: an aqueous suspension, two suspensions in Labrafil® M2125CS (1 and 2 ml/kg) and a solution in Labrafil® M2125CS (4 ml/kg).

Results

The obtained absolute bioavailabilities of danazol were 1.5?±?0.8%; 7.1?±?0.6%; 13.6?±?1.4% and 13.3?±?3.4% for the aqueous suspension, 1, 2 and 4 ml Labrafil® M2125CS per kg respectively. Thus administration of danazol with Labrafil® M2125CS resulted in up to a ninefold increase in the bioavailability, and the bioavailability was dependent on the Labrafil® M2125CS dose. In vitro lipolysis of the formulations was able to predict the rank order of the bioavailability from the formulations, but not the absorption profile of the in vivo study.

Conclusions

The bioavailability of danazol increased when Labrafil® M2125CS was used as a vehicle, both when danazol was suspended and solubilized in the vehicle. The dynamic in vitro lipolysis model could be used to rank the bioavailabilities of the in vivo data.

     

Transmucosal delivery of domperidone from bilayered buccal patches: <Emphasis Type="Italic">In Vitro,Ex Vivo</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> characterization

Bilayered mucoadhesive buccal patches for systemic administration of domperidone (DOM), a dopamine-receptor (D₂) antagonist, were developed using hydroxy propyl methyl cellulose and PVPK30 as a primary layer and Eudragit RLPO and PEO as a secondary layer. Ex vivo drug permeation through porcine buccal membrane was performed. Bilayered buccal patches were developed by solvent casting technique and evaluated for in vitro drug release, moisture absorption, mechanical properties, surface pH, in vitro bioadhesion, in vivo residence time and ex vivo permeation of DOM through porcine buccal membrane from a bilayered buccal patch. Formulation DB4 was associated with 99.5% drug release with a higuchi model release profile and 53.9% of the drug had permeated in 6 h, with a flux of 0.492 mg/h/cm² through porcine buccal membrane. DB4 showed 5.58 N and 3.28 mJ peak detachment force and work of adhesion, respectively. The physicochemical interactions between DOM and the polymer were investigated by differential scanning calorimetry (DSC) and fourier transform infrared (FTIR) Spectroscopy. DSC and FTIR studies revealed no interaction between drug and polymer. Stability studies for optimized patch DB4 was carried out at 40°C/75% relative humidity. The formulations were found to be stable over a period of 3 months with respect to drug content, in vitro release and ex vivo permeation through porcine buccal membrane. The results indicate that suitable bilayered mucoadhesive buccal patches with desired permeability could be prepared.     

Magnetic Nanoparticles Enhance Adenovirus Transduction <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis>

Purpose  

Adenoviruses are among the most powerful gene delivery systems. Even if they present low potential for oncogenesis, there is still a need for minimizing widespread delivery to avoid deleterious reactions. In this study, we investigated Magnetofection efficiency to concentrate and guide vectors for an improved targeted delivery.     

Bioequivalence Methodologies for Topical Drug Products: <Emphasis Type="BoldItalic">In Vitro</Emphasis> and <Emphasis Type="BoldItalic">Ex Vivo</Emphasis> Studies with a Corticosteroid and an Anti-Fungal Drug

Objective

To examine whether in vitro and ex vivo measurements of topical drug product performance correlate with in vivo outcomes, such that more efficient experimental approaches can be reliably and reproducibly used to establish (in)equivalence between formulations for skin application.

Materials and Methods

In vitro drug release through artificial membranes, and drug penetration into porcine skin ex vivo, were compared with published human in vivo studies. Two betamethasone valerate (BMV) formulations, and three marketed econazole nitrate (EN) creams were assessed.

Results

For BMV, the stratum corneum (SC) uptake of drug in 6 h closely matched data observed in vivo in humans, and distinguished between inequivalent formulations. SC uptake of EN from the 3 creams mirrored the in vivo equivalence in man (both clinically and via similar tape-stripping experiments). However, EN clearance from SC ex vivo did not parallel that in vivo, presumably due to the absence of a functioning microcirculation. In vitro release of BMV from the different formulations did not overlap with either ex vivo or in vivo tape-stripping data whereas, for EN, a good correlation was observed. No measurable permeation of either BMV or EN was detected in a 6-h in vitro skin penetration experiment.

Conclusions

In vitro and ex vivo methods for topical bioequivalence determination can show correlation with in vivo outcomes. However, these surrogates have understandable limitations. A “one-size-fits-all” approach for topical bioequivalence evaluation may not always be successful, therefore, and the judicious use of complementary methods may prove a more effective and reliable strategy.

     

Michaelis-Menten from an <Emphasis Type="Italic">In Vivo</Emphasis> Perspective: Open <Emphasis Type="Italic">Versus</Emphasis> Closed Systems

After a century of applications of the seminal Michaelis-Menten equation since its advent it is timely to scrutinise its principal parts from an in vivo point of view. Thus, the Michaelis-Menten system was revisited in which enzymatic turnover, i.e. synthesis and elimination was incorporated. To the best of our knowledge, previous studies of the Michaelis-Menten system have been mainly based on the assumption that the total pool of enzyme, free and bound, is constant. However, in fact this may not always be the case, particularly for chronic indications. Chronic (periodic) administration of drugs is often related to induction or inhibition of enzymatic processes and even changes in the free enzymatic load per se. This may account for the fact that translation of in vitro metabolism data have shown to give systematic deviations from experimental in vivo data. Interspecies extrapolations of metabolic data are often challenged by poor predictability due to insufficient power of applied functions and methods. By incorporating enzyme turnover, a more mechanistic expression of substrate, free enzyme and substrate-enzyme complex concentrations is derived. In particular, it is shown that whereas in closed systems there is a threshold for chronic dosing beyond which the substrate concentration keeps rising, in open systems involving enzyme turnover this is no longer the case. However, in the presence of slow enzyme turnover, after an initial period of adjustment which may be quite long, the relation between substrate concentration and dose rate reduces to a linear expression. This new open framework is also applicable to transporter systems.     

Impact of the Charge Ratio on the <Emphasis Type="BoldItalic">In Vivo</Emphasis> Immunogenicity of Lipoplexes

Purpose

The present study investigated the immunogenic potential of different cationic liposome formulations with a DNA plasmid encoding Pfs25, a malaria transmission-blocking vaccine candidate.

Methods

Pfs25 plasmid DNA was complexed with cationic liposomes to produce lipoplexes at different charge ratios of the cationic lipid head group to the nucleotide phosphate (N:P). The formation of lipoplexes was visualized by Cryogenic-TEM. Confocal microscopy of lipoplexes formed with GFP encoding plasmid DNA, and flow cytometry was used to determine their in vitro transfection capability. Two different lipoplex formulations using plasmid DNA encoding Pfs25 were evaluated for in vivo immunogenicity after intramuscular administration in Balb/c mice. Immune sera were analyzed by ELISA.

Results

The results demonstrated that the cationic liposome-mediated DNA immunization with an N:P charge ratio of 1:3 (anionic lipoplexes) is more effective than the use of naked plasmid DNA alone. No antibody response was observed when lipoplexes with a higher N:P charge ratio of 10:3 (cationic lipoplexes) were used. Trehalose was added to some lipoplex formulations as a cryoprotectant and adjuvant, but it did not yield any further improvement of immunogenicity in vivo.

Conclusions

The results suggest that Pfs25 plasmid DNA delivered as lipoplexes at a charge ratio of 1:3 elicited strong immunogenicity in mice and may be improved further to match the immune responses of DNA vaccines administered by in vivo electroporation.

     

<Emphasis Type="BoldItalic">In Vitro</Emphasis> Transport Activity and Trafficking of MRP2/<Emphasis Type="BoldItalic">ABCC2</Emphasis> Polymorphic Variants

Purpose

Multidrug resistance-associated protein 2 (MRP2/ABCC2) is an efflux pump that removes drugs and chemicals from cells. We sought to characterize the expression, trafficking and in vitro activity of seven single nucleotide polymorphisms (SNPs) in the ABCC2 gene.

Methods

ABCC2 SNPs were generated using site-directed mutagenesis and stably expressed in Flp-In HEK293 cells, which allows targeted insertion of transgenes within the genome. Total and cell surface expression of MRP2 as well as accumulation of substrates (calcein AM and 5(6)-carboxy-2′,7′-dichlorofluorescein diacetate, CDCF) were quantified in cells or inverted membrane vesicles expressing wild-type (WT) or variant forms.

Results

The cell surface expression of the C-24T-, G1249A-, G3542T-, T3563A-, C3972T- and G4544A-MRP2 variants was similar to WT-MRP2. While expression was similar, transport of calcein AM was enhanced in cells expressing the G3542T-, T3563A-, C3972T-, and G4544A-MRP2 variants. By comparison, cells expressing the C2366T-MRP2 variant had 40–50% lower surface expression, which increased the accumulation of calcein AM up to 3-fold. Accumulation of CDCF in inverted membrane vesicles expressing the C2366T-MRP2 variant was also reduced by 50%. In addition, the G1249A-MRP2 variant had decreased transport of CDCF.

Conclusions

Taken together, these data demonstrate that genetic variability in the ABCC2 gene influences the in vitro expression, trafficking, and transport activity of MRP2.

     

Bioadhesive Films Containing Benzocaine: Correlation Between <Emphasis Type="Italic">In Vitro</Emphasis> Permeation and <Emphasis Type="Italic">In Vivo</Emphasis> Local Anesthetic Effect

Purpose  

The aim of this work was to develop anesthetic bioadhesive films containing benzocaine and study their in vitro skin permeation and in vivo performance, in comparison with commercial formulations.     

Preclinical and Clinical <Emphasis Type="BoldItalic">In Vitro In Vivo</Emphasis> Correlation of an hGH Dextran Microsphere Formulation

Purpose To investigate the in vitro in vivo correlation of a sustained release formulation for human growth hormone (hGH) based on hydroxyethyl methacrylated dextran (dex-HEMA) microspheres in Pit-1 deficient Snell dwarf mice and in healthy human volunteers. Materials and Methods A hGH-loaded microsphere formulation was developed and tested in Snell dwarf mice (pharmacodynamic study) and in healthy human volunteers (pharmacokinetic study). Results Single subcutaneous administration of the microspheres in mice resulted in a good correlation between hGH released in vitro and in vivo effects for the hGH-loaded microsphere formulation similar to daily injected hGH indicating a retained bioactivity. Testing the microspheres in healthy volunteers showed an increase (over 7–8 days) in hGH serum concentrations (peak concentrations: 1–2.5 ng/ml). A good in vitro in vivo correlation was obtained between the measured and calculated (from in vitro release data) hGH serum concentrations. Moreover, an increased serum concentration of biomarkers (insulin-like growth factor-I (IGF-I), IGF binding protein-3 (IGFBP-3) was found again indicating that bioactive hGH was released from the microspheres. Conclusions Good in vitro in vivo correlations were obtained for hGH-loaded dex-HEMA microspheres, which is an important advantage in predicting the effect of the controlled drug delivery product in a clinical situations.     

The <Emphasis Type="BoldItalic">In vitro</Emphasis> Sub-cellular Localization and <Emphasis Type="BoldItalic">In vivo</Emphasis> Efficacy of Novel Chitosan/GMO Nanostructures containing Paclitaxel

Purpose

To determine the in vitro sub-cellular localization and in vivo efficacy of chitosan/GMO nanostructures containing paclitaxel (PTX) compared to a conventional PTX treatment (Taxol^®).

Methods

The sub-cellular localization of coumarin-6 labeled chitosan/GMO nanostructures was determined by confocal microscopy in MDA-MB-231 cells. The antitumor efficacy was evaluated in two separate studies using FOX-Chase (CB17) SCID Female-Mice MDA-MB-231 xenograph model. Treatments consisted of intravenous Taxol^® or chitosan/GMO nanostructures with or without PTX, local intra-tumor bolus of Taxol^® or chitosan/GMO nanostructures with or without PTX. The tumor diameter and animal weight was monitored at various intervals. Histopathological changes were evaluated in end-point tumors.

Results

The tumor diameter increased at a constant rate for all the groups between days 7-14. After a single intratumoral bolus dose of chitosan/GMO containing PTX showed significant reduction in tumor diameter on day 15 when compared to control, placebo and intravenous PTX administration. The tumor diameter reached a maximal decrease (4-fold) by day 18, and the difference was reduced to approximately 2-fold by day 21. Qualitatively similar results were observed in a separate study containing PTX when administered intravenously.

Conclusion

Chitosan/GMO nanostructures containing PTX are safe and effective administered locally or intravenously. Partially supported by DOD Award BC045664

     

Thermosensitive Drug Delivery System of Salmon Calcitonin: <Emphasis Type="Italic">In Vitro</Emphasis> Release, <Emphasis Type="Italic">In Vivo</Emphasis> Absorption,Bioactivity and Therapeutic Efficacies

Purpose  

The purpose of this study was to develop a biodegradable triblock copolymer, mPEG-PLGA-mPEG-based delivery system for long-term controlled release of salmon calcitonin (sCT) after single subcutaneous injection.     

Paclitaxel-Loaded,Folic-Acid-Targeted and TAT-Peptide-Conjugated Polymeric Liposomes: <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluation

Objective  

Folic acid and TAT peptide were conjugated on the octadecyl-quaternized, lysine-modified chitosan-cholesterol polymeric liposomes (FA-TATp-PLs) to investigate their potential feasibility for tumor-targeted drug delivery.