A minimally invasive technique for surgical treatment of hallux valgus: simple, effective, rapid, inexpensive (SERI)

Purpose

Several bony and soft tissue procedures have been described for the treatment of hallux valgus, and currently mini-invasive surgical techniques are preferred in order to reduce surgical trauma, complications, time of surgery and to allow an earlier recovery. The aim of this study is to analyse a series of 1,000 consecutive cases of hallux valgus, surgically treated by the minimally invasive SERI technique, reporting results at mid-term follow-up.

Methods

We prospectively studied 641 patients (1,000 feet) with symptomatic hallux valgus surgically treated by SERI osteotomy. Inclusion criteria were: age between 20 and 65 years, reducible mild or moderate hallux valgus, HVA ≤ 40°, IMA ≤ 20°, and arthritis of the first metatarsophalangeal joint up to grade 2 according to the Regnauld classification.

Results

The American Orthopaedic Foot and Ankle Society (AOFAS) score rose from 46.8 ± 16.7 preoperatively to 89 ± 10.3 at last follow-up. Radiographic control at follow-up showed a complete healing of the osteotomy and remodelling of the metatarsal bone. Low rate of complication has been reported.

Conclusions

This study demonstrated that the SERI technique is effective in treating mild to moderate hallux valgus in terms of relief from symptoms and functional improvement. This technique allowed correction of the main parameters of the deformity, with durable clinical and radiographic results at a mid-term follow-up.

Electronic supplementary material

The online version of this article (doi:10.1007/s00264-013-1980-8) contains supplementary material, which is available to authorized users.     

The Use of Biologic DMARDS Identifies Rheumatoid Arthritis Patients with More Optimistic Expectations of Total Knee Arthroplasty

Background

Preoperative expectations of total knee arthroplasty (TKA) correlate with postsurgical satisfaction, and are linked to outcomes. Rheumatoid arthritis (RA), and other chronic diseases, may lower expectations, although new biologic medications have greatly enhanced patients’ quality of life.

Questions/Purposes

The purpose of this study is to compare preoperative expectations of RA to those of matched osteoarthritis (OA) patients undergoing TKA, and examine the subset of RA on biologic DMARD therapy.

Methods

For a cross-sectional study, RA and OA identified from an institutional TKA registry were matched on age, sex, prior TKA, and preoperative function. Expectations were measured using the Hospital for Special Surgery (HSS) Knee Expectations Survey. Expectations and quality of life measures were assessed preoperatively and scores were compared between RA and OA.

Results

One hundred fourteen RA cases, 46.5% on biologics, were matched to 228 OA cases. The average expectations score was not significantly lower for RA compared to OA (72.9 ± 20.7 vs. 77.2 ± 18.3, p = 0.040. RA on biologics had expectations similar to OA (total expectation score 76.3 ± 18.1 vs. 77.4 ± 17.4, p = 0.71), while RA not on biologics had expectations that were significantly lower (69.9 ± 22.4 vs. 77.1 ± 19.0, p = 0.03).

Conclusion

Use of biologics in RA patients was associated with higher expectations, similar to those of OA patients, but the effect on outcomes is not known. Further studies should assess the effect of higher expectations in RA patients on outcomes.

Electronic supplementary material

The online version of this article (doi:10.1007/s11420-014-9380-1) contains supplementary material, which is available to authorized users.     

Extra-articular dorsal closing-wedge osteotomy to treat late-stage Freiberg disease using polyblend sutures: technical tips and clinical results

Purpose

The purpose of this study was to evaluate the clinical outcomes regarding the dorsal wedge osteotomy fixed using a polyblend suture and describe the usefulness of this fixation method for the treatment of Freiberg disease.

Methods

The subjects consisted of 13 feet from 13 cases suffering from Freiberg disease that underwent extra-articular dorsal closing-wedge osteotomy using a polyblend suture. The average age was 31.7 (range 13–72) years. The average follow-up period was 17 (range 14–24) months. Regarding image findings, time to bone union and metatarsal shortening was reviewed. The investigation was carried out using the range of motion (ROM), visual analog scale (VAS), and Japanese Society of the Surgery of Foot lesser toe scale (JSSF score) in the MTP joint before surgery and at the latest follow-up.

Results

Calluses under the metatarsal head were not observed in any cases. The mean metatarsal shortening was 2.33 ± 2.07 mm at follow-up. The bone union required an average of 8.4 ± 0.8 weeks. The average ROM of dorsal flexion improved from 37.2 ± 5.3° before surgery to 73.6 ± 9.9° at latest follow-up (p < 0.0001). The average ROM of plantar flexion improved from 16.0 ± 10.1° before surgery to 19.5 ± 8.6° at latest follow-up (p = 0.35). The average VAS significantly improved from 75.3 ± 8.5 before surgery to 4.9 ± 4.2 at latest follow-up (p < 0.0001). The average JSSF score significantly improved from 67.3 ± 9.4 points before surgery to 98.8 ± 3.0 points at the latest follow-up (p < 0.0001).

Conclusion

Extra-articular dorsal closing-wedge osteotomy using a polyblend suture was carried out to treat Freiberg disease. The bone union was observed in all cases with improved clinical results. Fixation using a polyblend suture was considered to be useful.     

Patellar resurfacing as a second stage procedure for persistent anterior knee pain after primary total knee arthroplasty

Purpose

Knee pain after total knee arthroplasty may be caused by an unresurfaced patella. Secondary isolated resurfacing of the previously unresurfaced patella in total knee arthroplasty remains controversial. The aim of this retrospective study was to evaluate the outcome after patellar resurfacing as a second stage procedure.

Methods

The study included 22 patients (13 female/nine male) who underwent resurfacing of the patella with a mean follow-up of 61.8 ± 39.2 months. The mean age of the patients was 60 ± 9.7 years at the time of operation. The average period between total knee arthroplasty and patellar resurfacing was 26.3 ± 15.2 months. The patient’s subjective satisfaction was assessed by a custom-made questionnaire.

Results

The mean Knee Society Score improved significantly from 60.1 ± 8.3 to 77.0 ± 6.3 (p = 0.0063). The mean functional score also improved significantly from 42.7 ± 2.3 to 60.2 ± 3.9 (p = 0.001). Three patients (13.6%) needed further operative revision.

Conclusions

Although clinical scores showed significant improvement some patients continued to have pain and remained dissatisfied without detecting a specific reason. Further studies are needed to better elucidate the benefit of patellar resurfacing as second stage procedure.     

Does total hip arthroplasty restore native hip anatomy? Three-dimensional reconstruction analysis

Purpose

Component orientations and positions in total hip arthroplasty (THA) are important parameters in restoring hip function. However, measurements using plain radiographs and 2D computed tomography (CT) slices are affected by patient position during imaging. This study used 3D CT to determine whether contemporary THA restores native hip geometry.

Methods

Fourteen patients with unilateral THA underwent CT scan for 3D hip reconstruction. Hip models of the nonoperated side were mirrored with the implanted side to quantify the differences in hip geometry between sides.

Results

The study demonstrated that combined hip anteversion (sum of acetabular and femoral anteversion) and vertical hip offset significantly increased by 25.3° ± 29.3° (range, −25.7° to 55.9°, p = 0.003) and 4.1 ± 4.7 mm (range, −7.1 to 9.8 mm, p = 0.009) in THAs.

Conclusions

These data suggest that hip anatomy is not fully restored following THA compared with the contralateral native hip.     

Outcomes after shoulder arthroplasty revision with glenoid reconstruction and bone grafting

Purpose

Extensive glenoid bone loss after failed shoulder arthroplasty represents a challenge for revision arthroplasty. Treatment options vary widely and have been a source of controversy among experts.

Methods

Between 2004 and 2010, a total of 17 patients underwent glenoid reconstruction surgery using an autologous iliac crest bone graft and secondary revision arthroplasty due to extensive glenoid bone loss after failed previous total shoulder arthroplasty. The outcomes were assessed by means of clinical examination, Constant score, and bi-plane radiography as well as pre-, postoperative and follow-up CT.

Results

Before the revision surgery, the mean Constant score was 24 ± 17 and improved to 40 ± 13 after the glenoid rebuilding and revision arthroplasty. CT imaging revealed adequate glenoid bone stock restoration with no relevant graft resorption or loosening of the glenoid. The average postoperative antero-posterior diameter of the glenoid was 28 ± 3 mm which had decreased to 25 ± 3 mm at follow-up. The average postoperative version of the glenoid was 95.7° ± 6° and had decreased to 98.5° ± 4° at follow-up. Both the glenoid version and diameter had changed significantly (P < 0.001) comparing postoperative and follow-up CT-scans.

Conclusion

Glenoid reconstruction surgery using an iliac crest bone-block autograft prior to revision arthroplasty represents a valuable salvage procedure in cases of extensive glenoid bone loss after primary shoulder arthroplasty. Sufficient glenoid bone stock restoration is indispensable for reliable fixation of glenoid components and in turn a satisfactory clinical outcome.     

Subclinical bilateral involvement of the hip in patients with slipped capital femoral epiphysis—a multicentre study

Purpose

This study was conducted to assess the posterior inclination of the contralateral femoral epiphysis in patients with unilateral slipped capital femoral epiphysis (SCFE).

Methods

The posterior sloping angle (PSA) was measured using lateral radiographs in 67 patients with a unilateral SCFE and in 41 age-matched normal controls. A symptomatic epiphyseal slip was defined as the development of SCFE.

Results

The contralateral PSA in SCFE patients was more widely distributed and significantly larger compared to controls (15.0° vs. 9.0°, p < 0.0001). Forty-seven hips (70.1 %) had a PSA of greater than 12.8°, which was +2SD of the control hips. Of the 65 hips excluding the two cases with prophylactic pinning, 11 hips (16.9 %) eventually developed a contralateral SCFE during adolescence and their PSA at the initial visit was significantly larger compared to patients without a contralateral SCFE (18.0° vs. 14.3°, p < 0.005) with a cutoff value of 19°.

Conclusions

These findings suggested the possibility of bilateral hip involvement in SCFE patients. Hips with greater degrees of PSA (> 19°) are likely to become symptomatic.     

Magnetic Resonance Imaging is not suitable for interpretation of meniscal status ten years after arthroscopic repair

Purpose

The purpose of this study was to assess the MRI features of the all-inside repaired meniscus in the long-term.

Methods

Among 27 consecutive all-inside arthroscopic meniscal repairs, 23 patients aged 25 ± 5 years at the time of surgery were reviewed at a median follow-up of 10 ± 1 years. Retrospective clinical examinations and imaging assessments using a 1.5-T MRI after all-inside arthroscopic meniscal repair were conducted.

Results

At follow-up, Lysholm and IKDC averaged 89 ± 11 and 95 ± 8, respectively. MRI examinations revealed no meniscal signal alteration in three patients (13 %), a vertical signal located in the previously torn area in seven (30 %), a horizontal grade 3 in nine (39 %), and a complex tear (grade 4) in four (17.5 %). There were no differences between medial and lateral menisci (p = 0.15), stable and stabilised knees (p = 0.56).

Conclusions

Several abnormal vertical and/or horizontal hypersignals are still present on MRI examination ten years after arthroscopic all-inside meniscal repair. The appearance of early signs of osteoarthritis is rare, suggesting a chondroprotective effect of the repaired meniscus.     

Ilizarov non-free bone plasty for extensive tibial defects

Purpose

The purpose of this study was to present a retrospective comparative overview of the Ilizarov non-free bone plasty techniques of one-stage multilevel fragment lengthening and gradual tibilisation of the fibula used for extensive tibial defect management.

Methods

Extensive tibial defects in 83 patients were managed either by multilevel fragment lengthening (group I, n = 41, mean defect size 13.1 ± 0.9 cm) or gradual tibilisation of the fibula (group II, n = 42, mean defect size 12.5 ± 1.2 cm) using the Ilizarov apparatus. The initial findings, treatment protocols and outcomes of those patients treated within the period 1972–2011 were studied retrospectively by medical records and radiographs, and statistically assessed with Microsoft Excel and Attestat software.

Results

Group I had multilevel fragment lengthening over one stage that averaged 288.0 ± 14.4 days. The mean total period of gradual tibilisation of the fibula in group II was 316.0 ± 29.7 days. The patient’s age in the latter group had an effect on the completeness of leg-length equalisation.

Conclusions

The techniques can be used to manage extensive tibial defects as all the defects bridged, leg-length discrepancy and deformity were corrected and patients were able to load their limbs.     

Anterior internal fixator versus a femoral distractor and external fixation for sacroiliac joint compression and single stance gait testing: a mechanical study in synthetic bone

Purpose

The purpose of this study was to evaluate the biomechanical stability and compressive forces across the sacroiliac (SI) joint of an anterior internal fixator compared to the femoral distractor and external fixator for vertically unstable pelvic fractures.

Methods

Five composite pelvises with a simulated APC type III injury fixed with a femoral distractor, external fixator, or anterior internal fixator were tested. A pressure-sensitive film (Tekscan) was placed in the disrupted SI joint recording the magnitude of force. Then, in a single-leg stance model (Instron machine), a load was applied through the sacrum. We recorded displacement at the pubic symphysis and SI joint using high-speed video. Peak load and displacement were measured, and axial stiffness was calculated. Values were compared using a Student’s t-test (p < 0.05).

Results

The SI joint was compressed significantly (p < 0.001) more using the anterior internal fixator (18.9 N) and femoral distractor (18.6 N) than the two-pin external fixator (2.5 N). There was no significant difference between the anterior internal fixator and the femoral distractor in displacement at the SI joint. The pubic symphysis displaced less with the femoral distractor than the anterior internal fixator (5.5 mm vs. 4.1 mm; p < 0.05).

Conclusions

The anterior pedicle screw internal fixator allows for indirect compression across the sacroiliac joint that is superior to two-pin external fixation and comparable to the femoral distractor. The anterior internal fixator may be an option for temporary anterior pelvic fixation in situations where external fixation or the femoral distractor have otherwise been used.     

Cartilage repair of the knee with Hyalograft C:® Magnetic Resonance Imaging assessment of the glycosaminoglycan content at midterm

Purpose

The aim of this study was to assess the stability of the glycosaminoglycan (GAG) content in the long term after matrix-associated autologous chondrocyte transplantation (MACT) with Hyalograft C in the knee over a follow-up period of one year.

Methods

In this cross-sectional evaluation, 11 patients after MACT of the knee consented to delayed gadolinium-enhanced magnetic resonance imaging of cartilage (dGEMRIC) measurements. The mean post-operative interval before the first MR examination was 40.6 ± 22.0 months, and the second MR examination was carried out after another 12 months. The Lysholm score was assessed for clinical evaluation. Quantitative T1 measurements after intravenous negatively charged MR contrast agent administration were performed. Global post-contrast T1 of the reference cartilage and the repair tissue and a relative post-contrast T1 value were calculated.

Results

The Lysholm score improved significantly from 59.8 ± 12.9 at baseline to 86.1 ± 15.7 at the second visit (p < 0.01). The mean global T1 of the repair tissue (1st visit 581.3 ± 126.4 ms; 2nd visit 684.1 ± 169.9 ms; p = 0.104) and the mean relative T1 value showed stable results over one year (1st visit 0.81 ± 0.28; 2nd visit 0.76 ± 0.32; p = 0.4).

Conclusions

The study demonstrated stable glycosaminoglycan content of the repair tissue after MACT at midterm.     

Fluoroscopy-guided retrograde core drilling and cancellous bone grafting in osteochondral defects of the talus

Purpose

In undetached osteochondral lesions (OCL) of the talus both revitalisation of the subchondral necrosis and cartilage preservation are essential. For these cases, we assess the results of minimally invasive retrograde core drilling and cancellous bone grafting.

Methods

Forty-one osteochondral lesions of the talus (12x grade I, 22x grade II and 7x grade III according to the Pritsch classification, defect sizes 7–14 mm) in 38 patients (mean age 33.2 years) treated by fluoroscopy-guided retrograde core drilling and autologous cancellous bone grafting were evaluated by clinical scores and MRI. The mean follow-up was 29.0 (±13) months.

Results

The AOFAS score increased significantly from 47.3 (±15.3) to 80.8 (±18.6) points. Lesions with intact cartilage (grades I and II) had a tendency to superior results than grade III lesions (83.1 ± 17.3 vs. 69.4 ± 22.2 points, p = 0.07). First-line treatments and open distal tibial growth plates led to significantly better outcomes (each p < 0.05). Age, gender, BMI, time to follow-up, defect localisation or a traumatic origin did not influence the score results. On a visual analogue scale pain intensity reduced from 7.5 (±1.5) to 3.7 (±2.6) while subjective function increased from 4.6 (±2.0) to 8.2 (±2.3) (each p < 0.001). In MRI follow-ups, five of the 41 patients showed a complete bone remodelling. In two cases demarcation was detectable.

Conclusions

The technique reported is a highly effective therapeutic option in OCL of the talus with intact cartilage grades I and II. However, second-line treatments and grade III lesions with cracked cartilage surface can not be generally recommended for this procedure.     

The Lyon’s sulcus-deepening trochleoplasty in previous unsuccessful patellofemoral surgery

Purpose

Trochleoplasty is a relatively rare operation with few published results and it remains a technically demanding procedure which requires careful patient selection. The ideal candidate for surgery remains to be elucidated, and some authors consider it as a good revision option in cases of previous unsuccessful operations for persisting patellar dislocation with underlying trochlear dysplasia. The purpose of this study is to record the results from the application of sulcus-deepening trochleoplasty in patients with trochlear dysplasia and previous unsuccessful surgery for patellar dislocation.

Methods

Twenty-two patients (24 knees) were operated upon during the period 9/1993–9/2006; they had undergone surgery for patellofemoral instability and had persistent patellar dislocation, and were followed-up for a mean of 66 months (24–191). Trochleoplasty was performed in all patients using the same technique and rehabilitation protocol. Additional soft-tissue and bony operations were performed in every case.

Results

Of all cases, 29.1 % had type B and 70.9 % had type D trochlear dysplasia. After trochleoplasty, no patient had a patellar re-dislocation up to the last follow-up. Pain decreased in 72 % and the apprehension sign was negative in 75 % of the cases (p < 0.01). Sulcus angle decreased from 153° ± 14° to 141° ± 10° (p < 0.01), TT-TG distance decreased from 16 ± 6 mm to 12 ± 2 mm (p < 0.001), and patellar tilt decreased from 31° ± 14° to 11° ± 8° (p < 0.0001). Mean pre-operative Kujala score was 44 (25–73) and at the latest follow-up it increased to 81 (53–100), (p < 0.001). At the time of final follow-up, there was no case of patellofemoral arthritis.

Conclusions

Trochlear dysplasia is a key factor in the treatment of recurrent patellar dislocation and its correction could be included in the surgical options. Sulcus-deepening trochleoplasty is an acceptable revision option for the surgical treatment of patients with persisting patellar dislocation and high-grade trochlear dysplasia.     

Groin Pain after Metal on Metal Hip Resurfacing: Mid-Term Follow-Up of a Prospective Cohort of Patients

Background and Purpose:

Groin pain after metal on metal hip resurfacing has been previously reported. The purpose of this study was to determine the natural history of a cohort of patients with groin pain after hip resurfacing previously reported on and incidence of revision surgery.

Methods:

Our group previously reported an 18% incidence of groin pain at a mean of 18 months post hip resurfacing. This cohort of groin pain patients was prospectively followed. Patients were evaluated using a visual analog pain rating score, the University of California at Los Angeles (UCLA) Physical Activity Index, and the Western Ontario and McMaster Universities Osteoarthritis (WOMAC) Index. Functional outcome scores were compared from initial to latest follow up using the paired Student’s t test. Further diagnostic evaluation and/or intervention or other complication was also recorded.

Results:

The latest mean follow up from surgery was 63 ± 15 months. The mean pain rating, UCLA, and WOMAC scores all improved at latest follow up, although WOMAC score improvement was not statistically significant. Mean pain rating score improved from 5.2 ± 2.0 to 2.5 ± 1.4 (p = 0.0001). UCLA activity score improved from 6.4 ± 2.0 to 6.9 ± 1.6 (p = 0.03). Total WOMAC score improved from 75.6 ± 20.5 to 84.5 ± 14.8 (p = 0.15). Only one patient was revised for an adverse local tissue reaction.

Conclusion:

Groin pain post hip resurfacing has a multifactorial etiology, and in the vast majority of cases improves over time with no significant functional limitations. However, the surgeon should be aware of the many potential causes, and help minimize the possibility with proper patient selection and surgical technique.     

Accuracy of Individualized Custom Tibial Cutting Guides in UKA

Background

Component malposition is one of the major reasons for early failure of unicompartmental knee arthroplasty (UKA).

Questions/Purposes

It was investigated how reproducibly patient-specific instrumentation (PSI) achieved preoperatively planned placement of the tibial component in UKA specifically assessing coronal alignment, slope and flexion of the components and axial rotation.

Patients and Methods

Based on computer tomography models of ten cadaver legs, PSI jigs were generated to guide cuts perpendicular to the tibial axis in the coronal and sagittal planes and in neutral axial rotation. Deviation ≥3° from the designed orientation in a postoperative CT was defined as outside the range of acceptable alignment.

Results

Mean coronal alignment was 0.4 ± 3.2° varus with two outliers. Mean slope was 2.8 ± 3.9° with six components in excessive flexion. It was noted that the implants were put in a mean of 1.7 ± 8.0° of external rotation with seven outliers

Conclusions

PSI helped achieve the planned coronal orientation of the component. The guides were less accurate in setting optimal tray rotation and slope.

Electronic supplementary material

The online version of this article (doi:10.1007/s11420-014-9410-z) contains supplementary material, which is available to authorized users.     

Comparison of low, multidirectional locked nailing and plating in the treatment of distal tibial metadiaphyseal fractures

Purpose

The aim of this study was to compare the results of a new technique for low, multidirectional locked nailing with closed reduction and minimally invasive plating in the treatment of distal tibial metadiaphyseal fractures.

Methods

Forty-six matched patients were divided according to age, gender, Injury Severity Score, and fracture pattern into group A (expert tibial nailing) and group B (minimally invasive plating). Then, the patients were followed up, and the clinical and radiographic results were retrospectively analysed.

Results

The mean followed-up was 24.7 ± 2.7 months in group A and 25.8 ± 2.8 months in group B. No patient had nonunion, shortening, hardware breakdown, or deep-seated infection. Patients in group A had a significantly shorter mean operating time, hospital stay, full weight-bearing time and union time (76 ± 16.6 vs. 90 ± 20.3 minutes, p = 0.000; 5.8 ± 2.1 vs. 8.9 ± 3.1 days, p = 0.000; 9.0 ± 1.4 vs. 11.1 ± 1.7 weeks, p = 0.000; and 21.3 ± 3.5 vs. 23.1 ± 3.6 weeks, p = 0.047, respectively). Three patients in group A and one patient in group B presented with malalignment (p = 0.608). The mean Olerud-Molander Ankle score was 89.0 ± 7.1 in group A and 87.6 ± 8.4 in group B (p = 0.478).

Conclusions

Distal tibia metadiaphyseal fractures may be treated successfully with low, multidirectional locked nails or plates. However, low, multidirectional locked nailing may represent a superior surgical option, since it offers advantages in terms of mean operating time, hospital stay, full weight-bearing time and union time.     

Fatigue performance of angle-stable tibial nail interlocking screws

Purpose

Tibial nail interlocking screw failure often occurs during delayed fracture consolidation or at early weight bearing of nailed unstable fractures, in general when high implant stress could not be reduced by other means. Is there a biomechanical improvement in long-term performance of angle stable locking screws compared to conventional locking screws for distal locking of intramedullary tibial nails?

Methods

Surrogate bones of human tibiae were cut in the distal third and distal locking of the 10 mm intramedullary tibial nail was performed with either two angle stable locking screws or two conventional locking screws in the mediolateral plane. Six specimens per group were mechanically tested under quasi-static and cyclic axial loading with constantly increasing force.

Results

Angle stable locking screw constructs exhibited significantly higher stiffness values (7,809 N/mm ± 647, mean ± SD) than conventional locking screw constructs (6,614 N/mm ± 859, p = 0.025). Angle stable locking screw constructs provided a longer fatigue life, expressed in a significantly higher number of cycles to failure (187,200 ± 18,100) compared to conventional locking screw constructs (128,700 ± 7,000, p = 0.004).

Conclusion

Fatigue performance of locking screws can be ameliorated by the use of angle stable locking screws, being especially important if the nail acts as load carrier and an improved stability during fracture healing is needed.     

The acromial index is not predictive for failed rotator cuff repair

Background

The main objective of this study was to evaluate the association between the acromial index (AI) and the incidence of recurrent tears of the rotator cuff (RC) in a cohort of patients with full thickness tears who underwent arthroscopic primary repair.

Methods

A prognostic study of a prospective case series of 103 patients with full thickness RC tears was undertaken. The average age was 59.5 years (39–74) and follow-up was 30.81 months (12–72). True anterior–posterior X-rays were obtained during the pre-operative evaluation. Pre and post-operative magnetic resonance imaging (MRI) were recorded.

Results

Eighteen cases with recurrent tears (17.4 %) were seen on post-operative MRI. The average AI for patients with recurrent tears was 0.711 ± 0.065 and for patients without recurrent tears 0.710 ± 0.064 (p < 0.05). A positive association between age and recurrent tears of the RC was noted (average ages: recurrent tears group 63 ± 5.9 years; group without recurrent tears 58.8 ± 7.5 years) (r = −0.216; p = 0.029). We did not find an association between size of the primary tear and recurrent tears (r = −0.075; p < 0.05) or between degrees of retraction of the primary and recurrent tears of the cuff (r = −0.073; p < 0.05). We observed that 38.9 % of the recurrent tears cases presented with more than one tendon affected before the arthroscopy. At follow-up, none of these recurrent tears showed more than one tendon affected on MRI evaluation.

Conclusion

In this study, we found that the AI radiological measurement is not a predictor for recurrent tears of the RC after primary arthroscopic repair.     

Kapandji pinning and tuberosities fixation of three- and four-part fractures of the proximal humerus

Purpose

The Kapandji pinning was initially described for the treatment of surgical neck fractures of the humerus in young patients. The aim of our study was to evaluate functional and radiological outcomes of the Kapandji modified technique in displaced complex three- and four-part fractures.

Methods

From 2005 to 2009, 32 patients (23 three-part and nine four-part fractures) were included retrospectively. The mean age was 63 years old (range, 22–86), and the dominant shoulder was involved in 40 % of the cases.

Results

At a mean follow up of 25 months (12–72), the mean absolute Constant score achieved 68 points (35–98) and adjusted score 80 % (47–100). Patients had an average forward elevation of the shoulder of 132° (80°–180°), an average external rotation of 36° (0°–90°), and an average internal rotation to the level of L1 (sacrum to the level of T6). The older the patients were the worst was the active anterior elevation recovery (r = −0.3; p = 0.01). Reduction and fixation of initial varus-displaced fractures was not as reliable as in valgus. In eight cases (25 %), K-wire migrations were observed and were correlated with age over 70 years old (p = 0.001). Two partial osteolysis of the greater tuberosity and two avascular necrosis of the humeral head (one was associated with a non-union) were identified. Moreover, three patients developed adhesive capsulitis.

Conclusion

The Kapandji technique with fixation of tuberosities provides satisfactory results for the treatment of complex proximal fractures of the humerus. However, we do not recommend this technique for patients older than 70 years and in cases of varus displaced fractures.     

Repair of segmental long-bone defects by stem cell concentrate augmented scaffolds: a clinical and positron emission tomography - computed tomography analysis

Purpose

Treating segmental long-bone defects remains a major challenge. For defects >3 cm, segmental transport represents the gold standard, even though the method is time consuming and afflicted with several complications. The aim of this study was to evaluate healing of such defects after grafting an osteogenic scaffold previously seeded with stem cell concentrate.

Methods

We evaluated five patients with segmental long-bone defects (3–14 cm) treated with bone marrow aspirate concentrates (BMAC) seeded onto a bovine xenogenous scaffold. The healing process was monitored by X-rays and positron emission tomography–computed tomography (PET-CT) three months after surgery.

Results

Centrifugation led to a concentration of leukocytes by factor 8.1 ± 7.5. Full weight bearing was achieved 11.3 ± 5.0 weeks after surgery. PET analysis showed an increased influx of fluoride by factor 8.3 ± 6.4 compared with the contralateral side (p < 0.01). Bone density in the cortical area was 75 ± 16 % of the contralateral side (p < 0.03). The patient with the largest defect sustained an implant failure in the distal femur and finally accomplished therapy by segmental transport. He also had the lowest uptake of fluoride of the patient collective (2.2-fold increase).

Conclusion

Stem cell concentrates can be an alternative to segmental bone transport. Further studies are needed to compare this method with autologous bone grafting and segmental transport.