Drug release property of chitosan–pectinate beads and its changes under the influence of microwave

The effects of microwave irradiation on the drug release property of pectinate beads loaded internally with chitosan (chitosan–pectinate beads) were investigated against the pectinate beads and beads coacervated with chitosan externally (pectinate–chitosonium beads). These beads were prepared by an extrusion method using sodium diclofenac as the model water-soluble drug. The beads were subjected to microwave irradiation at 80 W for 5, 10, 21 and 40 min. The profiles of drug dissolution, drug content, drug–polymer interaction and polymer–polymer interaction were determined by drug dissolution testing, drug content assay, drug adsorption study, differential scanning calorimetry (DSC) and Fourier transform infra-red spectroscopy (FTIR) techniques. Treatment of pectinate beads by microwave did not lead to a decrease, but an increase in the extent of drug released at 4 h of dissolution owing to reduced pectin–pectin interaction via the CO moiety of polymer. In addition, the extent of drug released from the pectinate beads could not be reduced merely through the coacervation of pectinate matrix with chitosan. The reduction in the extent of drug released from the pectinate–chitosonium beads required the treatment of these beads by microwave, following an increase in drug–polymer and polymer–polymer interaction in the matrix. The extent of drug released from the pectinate beads was reduced through incorporating chitosan directly into the interior of pectinate matrix, owing to drug–chitosan adsorption. Nonetheless, the treatment of chitosan–pectinate matrix by microwave brought about an increase in the extent of drug released unlike those of pectinate–chitosonium beads. Apparently, the loading of chitosan into the interior of pectinate matrix could effectively retard the drug release without subjecting the beads to the treatment of microwave. The microwave was merely essential to reduce the release of drug from pectinate beads when the chitosan was introduced to the pectinate matrix by means of coacervation. Under the influences of microwave, the drug release property of beads made of pectin and chitosan was mainly modulated via the CH, OH and NH moieties of polymers and drug, with CH functional group purported to retard while OH and NH moieties purported to enhance the drug released from the matrix.     

Investigation of solute permeation across hydrogels composed of poly(methyl vinyl ether‐co‐maleic acid) and poly(ethylene glycol)

Objectives Swelling kinetics and solute permeation (theophylline, vitamin B₁₂ and fluorescein sodium) of hydrogels composed of poly(methyl vinyl ether‐co‐maleic acid) (PMVE/MA) and poly(ethylene glycol) (PEG) are presented. Methods The effects of PMVE/MA and PEG 10 000 content on swelling behaviour (percentage swelling, the type of diffusion and swelling rate constant) were investigated in 0.1 m phosphate buffer. Network parameters, such as average molecular weight between crosslinks (M_c) and crosslink density, were evaluated. Key findings The percentage swelling and M_c of hydrogels increased with decrease in PMVE/MA content, where the water diffusion mechanism into the hydrogels was Class‐II type. In contrast, increase in PMVE/MA content caused an increase in the crosslink density. Permeation of theophylline, vitamin B₁₂ and fluorescein sodium, with increasing hydrodynamic radii, was studied through the equilibrium swollen hydrogels composed of PMVE/MA and PEG. In general, the permeability and diffusion coefficients of all three solutes decreased with increase in the PMVE/MA content. In addition, permeability and diffusion coefficient values increased with decreases in the hydrodynamic radii of the solute molecules. Conclusions The hydrogels have shown a change in swelling behaviour, crosslink density, M_c and solute permeation with change in PMVE/MA content, thus suggesting a potential application in controlled drug‐delivery systems.     

Controlled release of dexamethasone from poly(vinyl alcohol) hydrogel

This study investigated a chemically crosslinked poly(vinyl alcohol) (PVA) hydrogel controlled drug delivery system to deliver the anti-inflammatory drug dexamethasone (DEX). The PVA hydrogels, with different crosslinking densities, were characterized by swelling studies, electron scanning microscopy, viscosity, Fourier transform infrared spectroscopy (FTIR) and in vitro release assessment. Increasing crosslinking density slowed and decreased swelling and water absorption. FTIR analysis suggested DEX has possible interactions with the crosslinker and the PVA polymer. In vitro release of DEX from PVA hydrogels was sustained for 33 days and appeared to fit the Higuchi and Korsmeyer–Peppas models. This work indicates the likelihood of PVA hydrogel as a controlled drug release system for DEX for anti-inflammatory uses.     

Pegylated nanoparticles based on poly(methyl vinyl ether-co-maleic anhydride): preparation and evaluation of their bioadhesive properties

Pegylated nanoparticles based on poly(methyl vinyl ether-co-maleic anhydride) (PVM/MA) were prepared by simple solvent displacement method, in the absence of catalysts or specific chemical conditions. Pegylation efficiency increased with the increasing of molecular weight and bulk concentration of poly(ethylene glycols) (PEGs) investigated. In fact, the use of PEG with molecular weight less than 1000 Da did not lead to its attachment. ¹H NMR spectroscopy was performed in order to estimate the conformation state of PEG-chains and to predict the nanoparticle structure. Pegylation with PEG 2000 gave surface modified nanoparticles (“brush” conformation), while the chains of PEG 1000 were distributed either in the core or physically adsorbed on the nanoparticle surface. The capacity of nanoparticles to adsorb mucin at pH 7.4 was significantly higher for PEG 1000-NP than for PEG 2000-NP. The “brush” layer seemed to decrease the interaction between PEG 2000-NP and mucin, which facilitated their penetration through the mucus gel. As a consequence, PEG 2000-NP displayed higher capacity to develop adhesive interactions with rat intestinal mucosa in vivo. Independent on the weaker bioadhesive potential of PEG 1000-NP, both types of pegylated nanoparticles demonstrated very high affinity to the intestinal mucosa rather than to the stomach wall, which could be established for drug targeting to the small intestine.     

Crosslinked poly(methyl vinyl ether-co-maleic anhydride) as topical vehicles for hydrophilic and lipophilic drugs

Poly(methyl vinyl ether-co-maleic anhydride) crosslinked with ethylene glycol (GZ-ET), 1,4-butanediol (GZ-BUT), 1,6-exandiol (GZ-EX), 1,8-octanediol (GZ-OCT), 1,10-decanediol (GZ-DEC) or 1,12-dodecanediol (GZ-DOD) was prepared and employed as a supporting material for aqueous topical gels containing pyridoxine hydrochloride (PYCL) chosen as a hydrophilic model molecule or for O/A emulsion containing β-carotene chosen as a hydrophobic model molecule. We analyzed the effect of the nature of the crosslinker on the permeation of hydrophilic and lipophilic vitamins through porcine skin by in vitro permeation studies. The vehicles formed by crosslinked poly(methyl vinyl ether-co-maleic anhydride) showed enhanced vitamins permeation with respect to the same vehicles formed by noncrosslinked poly(methyl vinyl ether-co-maleic anhydride) (GZ). The decrease in the crosslinker acyl chain length provides vehicles accelerating the drug permeability through the skin.     

Drug release from the enzyme-degradable and pH-sensitive hydrogel composed of glycidyl methacrylate dextran and poly(acrylic acid)

Hydrogels composed of glycidyl methacrylate dextran (GMD) and poly(acrylic acid, PAA) were prepared by UV irradiation method for colon-specific drug delivery. GMD was synthesized by coupling of glycidyl methacrylate to dextran in the presence of 4-(N,N-dimethylamino)pyridine. GMD was photo-polymerized by ammonium peroxydisulfate as initiating system in phosphate-buffered solution (0.1 M, pH 7.4). And then, acrylic acid monomer was added and subsequently heat-polymerized by 2,2'-azobisisobutyronitrile as an initiator. The hydrogels exhibited high swelling ratio (about 20) at 37 degrees C, and showed a pH-dependent swelling behavior. In addition, the swelling ratio of the hydrogel was remarkably enhanced to about 45 times in the presence of dextranase at pH 7.4. The swelling-deswelling behavior proceeded reversibly for the GMD/PAA hydrogels between pH 2 and pH 7.4. Release of 5-aminosalicylic acid from the GMD/PAA hydrogels was evaluated in simulated gastrointestinal pH fluids in the absence or presence of dextranase. We concluded that the hydrogels prepared could be used as a dual-sensitive drug carrier for sequential release in gastrointestinal tract.     

Clonazepam release from core-shell type nanoparticles of poly(-caprolactone)/poly(ethylene glycol)/poly(-caprolactone) triblock copolymers

The triblock copolymer based on poly(-caprolactone) (PCL) as hydrophobic part and poly(ethylene glycol) (PEG) as hydrophilic one was synthesized and characterized. Core-shell type nanoparticles of poly(-caprolactone)/poly(ethylene glycol)/poly(-caprolactone) (CEC) block copolymer were prepared by a dialysis technique. According to the amphiphilic characters, CEC block copolymer can self-associate at certain concentration and their critical association concentration (CAC) was determined by fluorescence probe technique. CAC value of the CEC-2 block copolymer was evaluated as 0.0030 g/l. CAC values of CEC block copolymer decreased with the increase of PCL chain length, i.e. the shorter the PCL chain length, the higher the CAC values. From the observation of transmission electron microscopy (TEM), the morphologies of CEC-2 core-shell type nanoparticles were spherical shapes. Particle size of CEC-2 nanoparticles was 32.3±17.3 nm as a monomodal and narrow distribution. Particle size, drug loading, and drug release rate of CEC-2 nanoparticles were changed by the initial solvents and the molecular weight of CEC. The degradation behavior of CEC-2 nanoparticles was observed by ¹H NMR spectroscopy. It was suggested that clonazepam (CNZ) release kinetics were dominantly governed by diffusion mechanism.     

Drug release from thermo-responsive self-assembled polymeric micelles composed of cholic acid and poly(N-isopropylacrylamide)

Cholic acid, conjugated with amine-terminated poly(N-isopropylacrylamide) (abbreviated as CA/ATPNIPAAm), was synthesized by a N, N'-dicyclohexyl carbodiimide (DCC)-mediated coupling reaction. Self-assembled CA/ATPNIPAAm micelles were prepared by a diafiltration method in aqueous media. The CA/ATPNIPAAm micelles exhibited a lower critical solution temperature (LCST) at 31.5 degrees C. Micelle sizes measured by photon correlation spectroscopy (PCS) were approximately 31.6+/-5.8 nm. The CA/ATPNIPAAm micelles were spherical and their thermal size transition was observed by transmission electron microscope (TEM). A fluorescence probe technique was used for determining the micelle formation behavior of CA/ATPNIPAAm in aqueous solutions using pyrene as a hydrophobic probe. The critical micelle concentration (CMC) was evaluated as 8.9 x 10(-2) g/L. A drug release study was performed using indomethacin (IN) as a hydrophobic model drug. The release kinetics of IN from the CA/ATPNIPAAm micelles revealed a thermo-sensitivity by the unique character of poly(N-isopropylacrylamide) i.e. the release rate was higher at 25 degrees C than at 37 degrees C.     

聚(油酸/亚油酸-癸二酸)-庆大霉素在家兔体内的释药实验及相容性研究*

目的:观察聚(油酸/亚油酸-癸二酸)-庆大霉素在家兔体内释药情况及相容性。方法:将聚(油酸/亚油酸-癸二酸)-庆大霉素药丸植入家兔骨髓腔,数周后观察家兔骨、肌肉、肝、肾及血清中的庆大霉素浓度,并检测局部骨组织上清液的抑菌能力。在家兔背部脊柱旁肌肉组织和皮下植入不含庆大霉素的聚(油酸/亚油酸-癸二酸)-庆大霉素空药丸,以观察其与家兔组织的生物相容性。结果:药丸在家兔骨髓腔中释药良好,药丸释出的庆大霉素浓集在植入部位的骨组织中超过4周,在血清、肝、肾及局部肌肉中的庆大霉素含量甚微,骨组织上清液对常见的骨髓炎感染菌金葡球菌和大肠杆菌均有强大的抑菌活性。此外,聚(油酸/亚油酸-癸二酸)-庆大霉素还可在家兔体内自动降解。在观察期间没有发现明显的生物不相容性。结论:聚(油酸/亚油酸-癸二酸)-庆大霉素有望用于治疗慢性骨髓炎。     

Microencapsulation of lobster carotenoids within poly(viny1 alcohol) and poly(D,L-lactic acid) membranes

Abstract

The use of natural pigments such as lobster carotenoids in fish feed formulations offers advantages over the use of the synthetic alternatives. Microencapsulation of the pigments, with or without the addition of antioxidants to the formulation, may be of benefit in terms of stabilizing pigment colour. In the present study, lobster carotenoids were extracted from lobster shell into petroleum ether and microencapsulated by phase separation and salt coacervation within poly(viny1 alcohol) and poly(viny1 alocohol)/poly(D,L-lactic acid) membranes. Spherical microcapsules, with smooth, thin and resilient membranes were obtained with mean diameters ranging from 50 to 150μm, depending on the membrane material, and source of pigment. The microcapsules were pink-orange in colour, and colour stability was followed spectrophotometrically. Enhanced stability was observed in both membrane materials, in comparison to the non-encapsulated control. Rates of discoloration were determined under a variety of storage conditions, including the absence of light, reduced temperatures and under nitrogen atmosphere. The best stability of lobster carotenoids was observed under a nitrogen atmosphere within PVA/PLA membranes, representing an 11-fold enhancement of pigment stability in comparison to the controls. Under ambient conditions, the enhancement in pigment stability was approximately 6-fold. The optimum concentration of PVA during microencapsulation was 3–4%, and the microencapsulated pigments appeared most stable under acidic conditions. The rate of discoloration appeared independent of pigment concentration.     

Neomycin-loaded poly(styrene sulfonic acid-co-maleic acid) (PSSA-MA)/polyvinyl alcohol (PVA) ion exchange nanofibers for wound dressing materials

In this study, poly(styrene sulfonic acid-co-maleic acid) (PSSA-MA) blended with polyvinyl alcohol (PVA) was electrospun and then subjected to thermal crosslinking to produce PSSA-MA/PVA ion exchange nanofiber mats. The cationic drug neomycin (0.001, 0.01, and 0.1%, w/v) was loaded onto the cationic exchange fibers. The amount of neomycin loaded and released and the cytotoxicity of the fiber mats were analyzed. In vivo wound healing tests were also performed in Wistar rats. The results indicated that the diameters of the fibers were on the nanoscale (250 ± 21 nm). The ion exchange capacity (IEC) value and the percentage of water uptake were 2.19 ± 0.1 mequiv./g-dry fibers and 268 ± 15%, respectively. The loading capacity was increased upon increasing the neomycin concentration. An initial concentration of 0.1% (w/v) neomycin (F3) showed the highest loading capacity (65.7 mg/g-dry fibers). The neomycin-loaded nanofiber mats demonstrated satisfactory antibacterial activity against both Gram-positive and Gram-negative bacteria, and an in vivo wound healing test revealed that these mats performed better than gauze and blank nanofiber mats in decreasing acute wound size during the first week after tissue damage. In conclusion, the antibacterial neomycin-loaded PSSA-MA/PVA cationic exchange nanofiber mats have the potential for use as wound dressing materials.     

Deamidation of a model hexapeptide in poly(vinyl alcohol) hydrogels and xerogels

Abstract: Polymeric controlled release systems have been proposed to prolong the half‐lives of protein and peptide drugs in vivo and to deliver active drug at a controlled rate. These systems are ineffective, however, if the drug is not stable during storage and release. This study addresses the effect of poly(vinyl alcohol) on the stability and release of an incorporated hexapeptide, VYPNGA, which undergoes deamidation. Two types of peptide‐loaded poly(vinyl alcohol) matrices were formed, a semisolid hydrogel and a lower water content ‘xerogel’, and stored at 50°C for up to 122 days. The hexapeptide was less stable in both poly(vinyl alcohol) matrices than in aqueous buffer or lyophilized polymer‐free powders. The type of poly(vinyl alcohol) matrix appeared to influence the degradation mechanism, since the product distributions differ in the hydrogel and the xerogel. The results suggest that, rather than stabilizing this peptide, incorporation in poly(vinyl alcohol) matrices reduces stability relative to solution and lyophilized controls.     

Effects of incorporated drugs on degradation of novel 2,2'-bis(2-oxazoline) linked poly(lactic acid) films

Earlier studies have indicated that the degradation rate of poly(lactic acid) (PDLLA) can be modified by using 2,2′-bis(2-oxazoline) as a chain extender in polymer synthesis to form a lactic acid-based poly(ester-amide) (PEA). In the present study, the effect of an incorporated drug on the degradation rate of the PEA was evaluated. The model drugs, neutral guaifenesin, acidic sodium salicylate (pK_a 3.0) and basic timolol (pK_a 9.2), were incorporated into solvent cast PDLLA and PEA films. The drug content in the films was 2% (w/w). The degradation studies were carried out in PBS (pH 7.4, 37 °C); the resulting decrease in molecular weight of polymers was determined by size exclusion chromatography and the weight loss of films was measured. In addition, the drug release from the films in PBS (pH 7.4, 37 °C) was studied. The model drugs were released from the PDLLA and PEA films in a biphasic or triphasic manner. The final fast release phase of the drugs from both PDLLA and PEA films started when the molecular weight (M_n) of the polymer had decreased close to 15,000 g/mol. The degradation rate of the PDLLA films was clearly enhanced by incorporated sodium salicylate or timolol. Whereas, the degradation rate of the PEA film was not enhanced by the incorporated drugs. The present results indicate that when compared to the PDLLA film, degradation rate of the PEA film in the presence of the drug is more predictable.     

姜黄素PLGA纳米粒的制备及制剂学性质分析

目的制备姜黄素(Curcumin,Cur)聚乳酸羟基乙酸共聚物(PLGA)纳米粒(Cur-PLGA-NPs)并对其理化性质进行考察。方法采用改良的自乳化溶剂挥发法制备纳米粒,通过正交设计,以粒径、包封率和载药量为评价指标优化处方工艺。结果制备Cur-PLGA-NPs的优化条件为PLGA 100 mg,泊洛沙姆188浓度1.0%,丙酮与乙醇体积比3∶1,有机相体积15 m L。按优化条件所制备的Cur-PLGA-NPs粒径为(120.33±2.44)nm,多分散系数为0.10±0.02,包封率为84.50%±1.13%,载药量为4.75%±0.22%。结论采用改良的自乳化溶剂挥发法成功制备了Cur-PLGA-NPs,为后续"纳米粒-脂质体系统"的研究奠定了基础,有望实现药物在肝脏的浓集。     

Controlled transdermal iontophoresis of sulfosalicylic acid from polypyrrole/poly(acrylic acid) hydrogel

A conductive polymer–hydrogel blend between sulfosalicylic acid-doped polypyrrole (PPy) and poly(acrylic acid) (PAA) was used as a carrier/matrix for the transdermal drug delivery under applied electrical field. PAA films and the blend films were prepared by solution casting with ethylene glycol dimethacrylate (EGDMA) as a cross-linking agent, followed by the blending of PPy particles and the PAA matrix. The effects of cross-linking ratio and electric field strength on the diffusion of the drug from PAA and PPy/PAA hydrogels were investigated using a modified Franz-diffusion cell with an acetate buffer of pH 5.5 and at 37 °C, for a period of 48 h. The diffusion coefficient of the drug is calculated using the Higuchi equation, with and without an electric field, at various cross-linking ratios. The drug diffusion coefficient decreases with increasing drug size/mesh size ratio, irrespective of the presence of the conductive polymer as the drug carrier. The diffusion coefficient, at the applied electric field of 1.0 V, becomes larger by an order of magnitude relative to those without the electric field.     

One-step preparation of amino-PEG modified poly(methyl methacrylate) microchips for electrophoretic separation of biomolecules

A simple method for a chemical surface modification of poly(methyl methacrylate) (PMMA) microchips with amino-poly(ethyleneglycol) (PEG–NH₂) by nucleophilic addition–elimination reaction was developed to improve the separation efficiency and analytical reproducibility in a microchip electrophoresis (MCE) analysis of biomolecules such as proteins and enantiomers. In our procedure, the PEG chains were robustly immobilized only by introducing an aqueous solution of PEG–NH₂ into the PMMA microchannel. The electroosmotic mobilities on the modified chips remained almost constant during 35 days with 37 runs without any recoating. The PEG–NH₂ modified chip provided a fast, reproducible, efficient MCE separation of proteins with a wide variety of isoelectric points within 15 s. Furthermore, the application of the modified chip to affinity electrophoresis using bovine serum albumin gave a good chiral separation of amino acids.     

A Heterogeneously Structured Composite Based on Poly(lactic-co-glycolic acid) Microspheres and Poly(vinyl alcohol) Hydrogel Nanoparticles for Long-Term Protein Drug Delivery

Purpose. To prepare a heterogeneously structured composite based on poly (lactic-co-glycolic acid) (PLGA) microspheres and poly(vinyl alcohol) (PVA) hydrogel nanoparticles for long-term protein drug delivery. Methods. A heterogeneously structured composite in the form of PLGA microspheres containing PVA nanoparticles was prepared and named as PLGA-PVA composite microspheres. A model protein drug, bovine serum albumin (BSA), was encapsulated in the PVA nanoparticles first. The BSA-containing PVA nanoparticles was then loaded in the PLGA microspheres by using a phase separation method. The protein-containing PLGA-PVA composite microspheres were characterized with regard to morphology, size and size distribution, BSA loading efficiency, in vitroBSA release, and BSA stability. Results. The protein-containing PLGA-PVA composite microspheres possessed spherical shape and nonporous surface. The PLGA-PVA composite microspheres had normal or Gaussian size distribution. The particle size ranged from 71.5 m to 282.7 m. The average diameter of the composite microspheres was 180 m. The PLGA-PVA composite microspheres could release the protein (BSA) for two months. The protein stability study showed that BSA was protected during the composite microsphere preparation and stabilized inside the PLGA-PVA composite microspheres. Conclusions. The protein-containing PLGA-PVA composite may be suitable for long-term protein drug delivery.     

Drug release profiles from and degradation of a novel biodegradable polymer, 2,2-bis(2-oxazoline) linked poly(-caprolactone)

In the present study, poly (epsilon -caprolactone) (PCL) was modified by introducing oxamide groups into PCL (PCL-O). The degradation (decrease in molecular weight) and erosion (weight loss) of PCL and PCL-O films were studied in PBS (pH 7.4, USP XXIV, 37 degrees C, 26 weeks incubation). The release rates of guaifenesin (M(w) 198.2), griseofulvin (M(w) 352.8), timolol (M(w) 332.4), sodium salicylate (M(w) 160.1) and FITC-dextran (M(w) 4400) from PCL and PCL-O preparations (solvent cast films, compression-molded plates, midi injection-molded rods and microparticles) were examined in PBS (pH 7.4, 37 degrees C). The degradation rate of PCL-O film was faster than that of PCL film while no erosion was observed for either film. When compared to the corresponding drug release from PCL films, the release rates of low molecular weight drugs (M(w)< or =352.8) from PCL-O films were comparable, their releases from both films following closely square-root-of-time kinetics. These results indicate that the oxamide groups had no substantial effect on the release of the low molecular weight drugs. The exception was sodium salicylate which was released faster from PCL-O film. However, FITC-dextran release was notably faster from PCL-O microparticles than from those made of PCL. FITC-dextran release was a combination of diffusion and polymer degradation and thus, the faster degradation of PCL-O enhanced the release of FITC-dextran. In conclusion, the effects of the oxamide groups on drug release profiles were dependent on the drug release mechanisms.     

水溶性添加剂对聚乳酸-聚乙烯醇酸共聚物基质释药动力学的影响

目的选择不同亲水性及空间构型的添加剂，研究其对聚乳酸-聚乙烯醇酸共聚物(poly lactic-co-glycolic acid, PLGA)药物释放动力学的影响，为心血管药物局部用药控释制剂的研究提供理论依据。方法用抗细胞增生药物2-氨基色酮(U-86)作为代表性药物，用溶剂浇铸和压膜结合的方法制备药物/PLGA/添加剂双层膜，在37 ℃磷酸缓冲液中测定体外药物释放并用扫描电镜观察表面形态。结果水溶性添加剂明显地提高了U-86的释放率，并转变为近似的单阶段模式。药物释放速率与基质的失重速率非常吻合。水溶性添加剂的基质在水中形成高度多孔的结构。结论添加剂的水溶性、分子量大小及空间构型等对于聚合物基质的孔隙结构具有决定性作用，而这些孔隙结构的特征又影响着药物释放机制以及释放动力学模式。