High-precision measurements of cementless acetabular components using model-based RSA: An experimental study

Background?In RSA, tantalum markers attached to metal-backed acetabular cups are often difficult to detect on stereo radiographs due to the high density of the metal shell. This results in occlusion of the prosthesis markers and may lead to inconclusive migration results. Within the last few years, new software systems have been developed to solve this problem. We compared the precision of 3 RSA systems in migration analysis of the acetabular component.

Material and methods?A hemispherical and a nonhemispherical acetabular component were mounted in a phantom. Both acetabular components underwent migration analyses with 3 different RSA systems: conventional RSA using tantalum markers, an RSA system using a hemispherical cup algorithm, and a novel modelbased RSA system.

Results?We found narrow confidence intervals, indicating high precision of the conventional marker system and model-based RSA with regard to migration and rotation. The confidence intervals of conventional RSA and model-based RSA were narrower than those of the hemispherical cup algorithm-based system regarding cup migration and rotation.

Interpretation?The model-based RSA software combines the precision of the conventional RSA software with the convenience of the hemispherical cup algo-rithm-based system. Based on our findings, we believe that these new tools offer an improvement in the measurement of acetabular component migration.     

Uncemented metal-on-metal acetabular component: follow-up of 112 hips for a minimum of 5 years

Background Aseptic loosening is the major cause of implant failure. In cemented hip arthroplasty, failure of the acetabular side is mainly due to lysis caused by wear particles. By using an implant with low wear characteristics and by enhancing acetabular fixation using an uncemented implant, we aimed to reduce acetabular lysis and thereby loosening.

Patients and methods This was a retrospective cohort study of 119 hips (101 patients) that had the Uncemented Fitmore cup (Sulzer Orthopedics). In 66 patients, the femoral component was CF-30 (Sulzer) used with cement. In the remaining 35 patients, thrust plate prosthesis (TPP) (Sulzer) was used. Of the 101 patients, 94 (112 hips) were available for study. Mean follow-up of the 94 patients was 7 (5-13) years.

Results The mean preoperative Harris hip score was 38 and the mean postoperative Harris hip score was 89 at the last follow-up. Taking aseptic loosening as the endpoint, the survival rate of the Fitmore cup was 100% at 11 years.

Interpretation The uncemented Fitmore acetabular cup with second generation metal-on-metal articulation showed good results with regard to aseptic loosening in the medium term.     

Hemispheric cups do not reproduce acetabular rim morphology

Background Iliopsoas impingement is a recurrent complication following THA, caused by muscle friction against a protrusive prosthetic cup.This study was designed to quantify the dimensional variations in acetabular rim proiles, with particular regard to the iliopubic valley, in order to suggest means to prevent iliopsoas impingement.

Material and methods 34 cadaver pelvises were analyzed using a hip navigation system.The morphometric data were processed to plot proiles of all acetabular rims with particular regard to the shape and depth of the psoas valley.

Results The acetabular rim is an asymmetric succession of 3 peaks and 3 troughs.The psoas valley is a salient feature in most pelvises and there is only a weak correlation between its depth (mean 3.8 mm, SD 2.0) and acetabular diameter, anteversion, or inclination.

Interpretation It would be dificult to obviate the anterior overlap of the acetabulum using a hemispheric cup, a fortiori in certain morphotypes, without compromising range of motion or risk of dislocation.The solution for prevention of iliopsoas impingement would be to adapt cup design to acetabular anatomy, which may require different implants for the right and left sides, and hence a doubled inventory.     

Safe fixation with two acetabular screws after Ganz periacetabular osteotomy

Background and purpose With Ganz periacetabular osteotomy, the osteotomized acetabular fragment is reoriented in an adducted, extended, and rotated position. The acetabular fragment is fixated with 2 screws and the patients are allowed 30 kg of weight bearing immediately after surgery. We were interested in examining the stability of the reoriented acetabulum after Ganz osteotomy; thus, the migration of the acetabular fragment was assessed by radiostereometry.

Patients and methods 32 dysplastic patients (27 females; 32 hips) were included in the study. Median age was 39 (20-57) years. Radiostereometric examinations were done at 1 week, 4 weeks, 8 weeks and 6 months. Data are presented as mean (SD).

Results 6 months postoperatively, the acetabular fragment had migrated 0.7 (0.8) mm medially, and 0.7 (0.5) mm proximally. Mean rotation in adduction was 0.5° (1.3). In other directions, mean migration was below 0.5 mm/°. There were no statistically significant differences in migration at 8 weeks and 24 weeks postoperatively regarding translation and rotation.

Interpretation Due to the limited amount of migration, we find our postoperative partial weight-bearing regime safe.     

Stepwise introduction of a bone-conserving osseointegrated hip arthroplasty using RSA and a randomized study: II. Clinical proof of concept--40 patients followed for 2 years

Background We have developed a bone-conserving commercially pure titanium hip replacement system using osseointegration principles: a metaphyseal loading proximal femoral component affixing into the retained neck and metaphysis only, leaving the femoral canal untouched. The acetabular cup closely fits a dual-geometry cavity, avoiding stress protection at the dome.

Patients and methods After extensive laboratory and clinical pilot trial investigations, the surface-engineered implants were submitted to a prospective randomized controlled clinical trial involving 40 patients (40 hips), in which they were compared to the cemented Spectron femoral component and cementless Trilogy cup as control implant. The following clinical measures were used to monitor progress at regular intervals for the first 2 postoperative years: radiostereometric analysis (RSA), Harris Hip Score, pain score, WOMAC, and SF-36.

Results After 2 years of follow-up, no statistically significant differences were seen between the groups concerning rotation or translation along the cardinal axes. The patients receiving the Gothenburg osseointegrated titanium (GOT) system had significantly higher Harris Hip Score at 6 months, suggesting more rapid recovery. WOMAC, SF-36 and pain analysis were similar for the first 2 postoperative years.

Interpretation Our RSA data suggest that osseointegration was achieved for all patients receiving the GOT hip system. This bone-conserving prosthesis may provide a good alternative, especially for young and active patients.     

Stable fixation of the ulnar component in the Kudo elbow prosthesis. A radiostereometric (RSA) study of 13 prostheses with 2-year follow-up

Background Concern has been expressed about the large number of radiolucent lines around the ulnar component of the Kudo elbow prosthesis in medium-term follow-up.

Patients and methods We studied the metal-backed cemented ulnar component in 13 Kudo elbow prostheses (type 5) using radiostereometric analysis (RSA). All patients had rheumatoid arthritis. There were 2 men and 9 women with a mean age of 55 years. 2 were operated bilaterally. The metal-backed ulnar component was marked with three 0.8 mm tantalum spheres and the proximal ulna with 5 spheres of 0.8 or 1.0 mm diameter. The initial RSA examination was performed during the first week after the operation. Further examinations were done at 4, 12 and 24 months. Conventional radiographs were taken during the first week postoperatively, and at 12 and 24 months.

Results Translations (medial/lateral, antero/poste-rior and proximal/distal) were less than 0.5 mm in all but 1 patient who had a maximal translation of 3.4 mm distally. The mean rotations around all three axes were less than 0.4 degrees. The patient who had a translation of 3.4 mm also had varus angulation exceeding 4 degrees. This patient also had progressive circumferential radiolucent lines on conventional radiographs. The Mayo elbow score increased from 40 (25-65) before surgery to 92 (45-100) at 2 years.

Interpretation The fixation of the metal-backed ulnar component of the Kudo elbow prosthesis at 2 years is good.     

No difference in migration or wear between cemented low-profile cups and standard cups : a randomized radiostereographic study of 53 patients over 3 years

Background Minor design changes may cause major changes in implant performance. Thus, as part of a stepwise introduction of a new low-profile cup, we performed a randomized trial comparing it to a well-docu-mented standard cup.

Patients and methods 60 patients, stratified according to sex, weight, and age, underwent cemented total hip arthroplasty using a Lubinus SP2 stem with ceramic head and were randomized to either the new low-profile Lubinus Flanged Anti-Luxation cup (FAL) or the Lubinus Standard Eccentric cup (Standard). 7 patients were excluded and 53 (28 FAL) were evaluated at 3, 6, 12, and 36 months postoperatively. Primary outcome variables, cup migration (MTPM), and wear (total 3-dimensional femoral head penetration) were measured with radiostereometry (RSA). Clinical outcome was evaluated with the western Ontario and McMaster osteoarthritis index (Womac) and the visual analog pain score (VAS).

Results We found no difference in migration between the FAL and Standard cups. There was no difference in wear between the two cups and there was no correlation between wear and migration. 3 cups (2 FAL and 1 Standard) showed continuous migration of a magnitude that indicated an increased risk of early loosening. Clinical outcome was excellent, without any difference between the 2 groups.     

High long-term loosening rate of conical screw cups

Background Acetabular screw cups seem to give high primary stability. We analyzed the migration and loosening behavior of a first-generation screw cup in a longterm follow-up.

Patients and methods We examined 92 uncemented titanium alloy conical screw cups prospectively. Implant migration was assessed with a digital high-precision method (EBRA) with an accuracy of 1.0 mm.

Results After mean 11 (0.5-18) years, 87 patients were available for examination and 5 patients had died. 32 implants had been revised and 7 cases showed radiographic evidence of loosening. The 10-year survival rate was 71%. Migration of more than 1 mm occurred in 53 hips. Implant survival was strongly associated with an annual migration of greater than 0.2 mm.

Interpretation The long-term behavior of this cup is not satisfactory. In spite of extraordinarily high primary implant stability, secondary osseointegration of this cup often fails. The annual migration rate represents a valid parameter for prediction of implant survival.     

The influence of initial pressurization and cup introduction time on the depth of cement penetration in an acetabular model

Background Acetabular cementation during total hip arthroplasty is considered difficult mainly due to the appearance and anatomy of the acetabulum. Improved cementation technique has been shown to improve the longevity of acetabular components.

Method We designed a ceramic model to investigate the effect of varying the initial cement pressurization and cup introduction times on the depth of cement penetration. 4 groups were prepared, 2 of which involved varying initial cement pressurization and cup introduction times. Group 3 involved initial cement pressurization with no cup introduction, while group 4 involved cup introduction with no prior cement pressurization.

Results and interpretation Most cement penetration occurred in the early pressurization phase, and we conclude that a relatively early and longer cement pressurization time and late cup introduction are positive factors for increased cement penetration in the acetabulum model.     

Postoperative clodronate decreases prosthetic migration: 4-year follow-up of a randomized radiostereometric study of 50 total knee patients

Background We have previously reported that 6 months of oral treatment with clodronate reduced the migration of the NexGen total knee prosthesis during the first postoperative year, as measured by radiostereometry (RSA). We now report the 4-year results.

Methods This was a double-blind randomized study, using RSA with maximal total point motion (MTPM).

Results With analysis according to the “intention to treat” principle, the only remaining difference between the groups at 4 years was reduced rotation around the transverse axis (a secondary variable) in the clodronate group. However, 3 patients (all clodronate) did not take any tablet after surgery. If they are excluded, there was an almost statistically significant difference between the groups at 4 years regarding MTPM from baseline, with the clodronate group showing 25% less migration. From 1 to 4 years, there was no difference in migration rate by MTPM, but there was a continuous increase in rotation around the transverse axis in the controls, which differed from the clodronate group. There were no cases of aseptic loosening. 2 patients had migration of more than 1.3 mm from baseline to 4 years; neither of them had taken clodronate. The others had migration of less than 0.9 mm.

Interpretation Because migration was clearly reduced by clodronate during the first postoperative year, and there was still a difference at 4 years when analyzed per protocol, it appears likely that this treatment can diminish the risk of loosening. The difference in the number of outliers also points in this direction, and may be more relevant than mean migration values.     

Accuracy of migration analysis in hip arthroplasty Digitized and conventional radiography, compared to radiostereometry in 51 patients

We assessed the accuracy of migration measurements on conventional and digitized radiographs of total hip arthroplasties by comparing the results with radiostereometry (RSA). 4 stem and 3 acetabular designs were studied. 2 of the stem designs and 1 cup design were uncemented. 180 manual and 202 digitized measurements were done on 120 conventional radiographic examinations.

The readings on digitized radiographs did not differ from the manual measurements on the same radiographs. A comparison of the measurements from plain radiographs and with RSA of the femoral stems revealed an accuracy (absolute mean + 2 SD) of between 3.9 and 12.3 mm, depending on the choice of landmarks. The greatest accuracy was obtained by using tantalum markers inserted into the greater or the lesser trochanter and the shoulder of the stem. The most medial point of the lesser trochanter proved to be the best bony landmark. Measurements, including both the center of the femoral head and the greater trochanter, were associated with poor accuracy. The accuracy as regards horizontal cup migration varied from 4.4 to 6.5 mm and the accuracy as regards vertical migration varied between 4.4 and 6.3 mm.

The intraobserver error (2 SD) ranged from 1.6 mm to 5.6 mm, The corresponding figures for the inter-observer error were 2.6 mm and 6.6 mm, respectively. One of the cemented cup designs was associated with inferior accuracy. Stem design did not affect the accuracy.     

Conversion from failed hemiarthroplasty to total hip arthroplasty: a Norwegian Arthroplasty Register analysis of 595 hips with previous femoral neck fractures

Background and purpose Conversion total hip replacement (THR) is a common procedure after failed hemiarthroplasty, but there have been few reports describing the long-term outcome of this procedure.

Patients and methods Between 1987 and 2004, 595 THRs were reported to the Norwegian Arthroplasty Register as conversion THR for failed hemiarthroplasty after a femoral neck fracture in patients aged 60 years and older. 122 operations left the femoral stem intact, whereas 473 were converted with exchange of the femoral stem.

Results We found a lower risk of failure (revision surgery for any reason) for the conversion procedures with stem exchange (RR = 0.4; 95% CI: 0.25-0.81) than for the conversion procedures that retained the femoral stem. For the 473 conversion arthroplasties with exchange of the stem, we found no difference in risk of failure compared to all revision stems in the register, either for the complete prosthesis (RR = 0.8; CI: 0.50- 1.20) or for the stem (RR = 0.9; CI: 0.53-1.59). However, for the 122 conversion procedures in which the femoral stem was retained, we found a significantly increased risk of failure for both the complete prosthesis (RR = 4.6; CI: 2.8-7.6) and for the acetabular cup (RR = 4.8; CI: 2.3-10) compared to primary hip arthroplasties.

Interpretation Our findings indicate that the seemingly easy operation of implanting an acetabular cup to convert a hemiarthroplasty to a total hip arthroplasty is an uncertain procedure and that the threshold for replacing the stem should be low.     

Comparison of analog and digital preoperative planning in total hip and knee arthroplasties. A prospective study of 173 hips and 65 total knees

Introduction Digital correction of the magnification factor is expected to yield more accurate and reliable preoperative plans. We hypothesized that digital templating would be more accurate than manual templating for total hip and knee arthroplasties.

Patients and methods Firstly, we established the interobserver and intraobserver reliability of the templating procedure. The accuracy and reliability of digital and analog plans were measured in a series of 238 interventions, which were all planned using both techniques.

Results Interobserver reliability was good for the planning of knee arthroplasties (κ-values 0.63-0.75), but not more than moderate for the planning of hip arthroplasties (κ-values 0.22-0.54). Analog plans of knee arthroplasties systematically underestimated the component sizes (1.1 size on average), while the digital procedure proved to be accurate (0.1-0.4 size too small on average). The following figures show percentage of cases receiving a correct implant, allowing an error of one size. Digital templating of the hip arthroplasty was less frequently correct (cemented cup and stem: 72% and 79%; uncemented cup and stem: 52% and 66%) than analog planning (cemented cup and stem: 73% and 89%; uncemented cup and stem: 64% and 52%).

Interpretation Planning of component sizes for total knee arthroplasties is an accurate procedure when performed digitally. Our digital preoperative plans which were performed by someone other than the surgeon were less accurate than the analog plans prepared by the surgeon.     

Comparison of two digital radiostereometric analysis methods in the determination of femoral head penetration in a total hip replacement phantom.

Radiostereometric analysis (RSA) has been used extensively to evaluate the magnitude and direction of penetration of the femoral head into the acetabular component of a total hip replacement as a result of polyethylene wear and creep. The accuracy and precision of an RSA study depends on several factors, including the radiographic technique, the analytical software, and the positioning of the tantalum markers. This study had three sequential purposes. First, an in vitro phantom model was used to quantify the accuracy and precision of digital images versus conventional radiography in RSA measurements of penetration of the femoral head into the acetabular shell in a total hip replacement. The Umeå RSA software package was used for analysis of both the conventional films, which were digitized at a resolution of 300 DPI, and digital radiographs, which were converted from a DICOM format at a resolution of 218 DPI. Digital radiography was found to be superior. Next, two methods of RSA analysis currently in use for determining femoral head penetration into polyethylene of total joint replacements were compared. Using the phantom model, we compared the Umeå RSA system (Biomedical Innovations AB) to the RSA‐CMS (RSA Clinical Measurement Solution) and in both cases used the digital radiographs. The Umeå RSA system was found to be superior. Finally, two methods of marking the position of the acetabular component with tantalum beads were compared: one in which beads were inserted into previously described towers protruding from the back of the acetabular shell and another in which beads were placed into the peripheral flange of the polyethylene liner using the Umeå RSA analysis system of the digital radiographs. The results using the two marker configurations were similar. © 2003 Orthopaedic Research Society. Published by Elsevier Ltd. All rights reserved.     

Structural allografts for bone stock reconstruction in two-stage revision for infected total hip arthroplasty: good outcome in 16 of 18 patients followed for 5-14 years

Background The use of massive bone allografts in cases of revision of failed total hip arthroplasties (THAs) due to infection is controversial.

Patients and methods 18 patients presented with infection at the site of a THA and were treated with a two-stage protocol. In the first stage, the prosthesis was removed together with all necrotic tissues and cement material if present. A custom-made mold of Palacos R cement containing 1 g of gentamicin was then inserted in 17 of the 18 patients. Systemic antibiotics were used during the interval period. In the second stage, the patients had either acetabular or femoral reconstruction using bulk allograft bone.

Results Mean follow-up was 9 (5-14) years. 1 patient presented with recurrent infection and underwent a Girdlestone resection arthroplasty as definitive treatment. Another patient had a mechanical failure of the acetabular component, which was revised 10 years after the second stage of the reconstruction. The mean Harris Hip Score improved from 34 points preoperatively to 71 points at the last review. By our definition, 16/18 of the patients had a successful outcome.

Interpretation Our results support the use of massive allografts in staged reconstructions of infected THAs complicated by considerable bone loss. ▪     

Acetabular reconstruction with the Burch-Schneider ring: an EBRA analysis of 40 cup revisions

Background Reconstruction of the bone stock and fixation of the implant remain challenging problems in revision surgery. In this retrospective study, we wanted to gain information on initial stability and wear after revision with the Burch-Schneider ring.

Patients and methods Between 1994 and 1998, we performed 70 reconstructions of the acetabulum with a Burch-Schneider ring in revision arthroplasty. 63 patients could be followed up clinically and radiographically. 40 cups were suitable for EBRA measurements whereas migration and wear could not be assessed by this method in 23 cases due to lack of comparability of pelvic radiographs. The mean follow-up time was 4.7 years.

Results 2 cups were re-revised and 14 cups had breakage or changes of position of the screws. 30 cups showed detectable migration and 18 cups detectable wear. The mean migration was 2.8 mm and the mean wear rate was 0.12 mm/year. 16 cups had detectable migration after 1 year; 11 of these 16 continued to migrate and 9 of them had screw breakage. Both re-revisions showed early migration. Early migration correlated with later screw breakage and the overall migration correlated with wear. The only risk factor found for early migration was the wear rate.

Interpretation The Burch-Schneider ring is an established and reliable implant for cup revision with good clinical results, but it seems to be difficult to maintain intraoperative stability. The implants with continuous migration may lead to late clinical failure and require further observation. Wear may contribute to migration and resorption of the bone graft. ▪     

Stepwise introduction of a bone-conserving osseointegrated hip arthroplasty using RSA and a randomized study: I. Preliminary investigations--52 patients followed for 3 years

Background We developed a total hip system using osseointegration guidelines, a metaphyseal-loading proximal femoral replacement in the retained neck and a dual-geometry titanium shell in the acetabulum.

Patients and methods A randomized controlled clinical trial was undertaken in 52 patients (53 hips), using the cemented Spectron stem and cementless Harris-Galante II cup as control implants (24 patients in experimental group, 29 control patients). Clinical measures of Harris Hip Score (HHS), pain score and radiostereometric analysis (RSA) at regular intervals for up to three years were used to monitor progress.

Results No statistically significant differences were found in HHS and pain score; the stability of the cementless experimental implant was also comparable to that of the cemented controls by RSA. 3 revisions were required for migration in the experimental group and 1 was required for component dislocation in the control group.

Interpretation Our findings indicate the practicality of osseointegration of titanium implants, but suggest that current performance is inadequate for clinical introduction. However, the stable fixation achieved in the retained neck in the majority of patients is indicative of osseointegration. This finding will encourage technical and design improvements for enhancement of clinical osseointegration and should also encourage further study. Periprosthetic osteolysis might be avoided by the establishment and maintenance of direct implant-bone connection: “osseointegration”.     

Local peroperative treatment with a bisphosphonate improves the fixation of total knee prostheses: a randomized, double-blind radiostereometric study of 50 patients

Background Postoperative migration of a joint prosthesis is related to the risk of late loosening. We have previously reported that oral treatment with clodronate reduced migration of the cemented NexGen total knee prosthesis during the first postoperative year, as measured by radiostereometry (RSA). Oral bisphosphonate treatment is sometimes unpleasant, and local treatment will enable higher local concentrations. We now report the results of local peroperative treatment with another bisphosphonate, ibandronate, with the same prosthesis.

Methods This is a double-blind, randomized study of 50 patients using RSA with maximal total point motion (MTPM) as primary effect variable. 1 mg ibandronate (1 mL) or 1 mL saline was applied to the tibial bone surface 1 min before cementation. RSA examination was done on the first postoperative day, and at 6, 12, and 24 months.

Results One ibandronate-treated patient died of unrelated causes, and 1 control patient refused to come for follow-up, leaving 24 patients in each group for analysis. There were no cases of aseptic loosening. By repeated measures ANOVA, migration (MTPM) was reduced by local application of ibandronate (p = 0.006). The effect was most pronounced at 6 months, with a reduction from 0.45 to 0.32 mm (95% CI for reduction: 0.04-0.21 mm). At 12 months, the migration from the postoperative examination was reduced from 0.47 to 0.36 mm (95% CI for reduction: 0.02-0.20 mm). At 24 months, the reduction was from 0.47 to 0.40 mm (95% CI: -0.01-0.16 mm).

Interpretation This is the first study to show improvement of prosthesis fixation by local pharmacological treatment in humans. The treatment appears to be safe, cheap, and easy to perform. However, the improvement in postoperative stability was not greater than with systemic clodronate treatment.     

5-year experience of highly cross-linked polyethylene in cemented and uncemented sockets: two randomized studies using radiostereometric analysis

Background Laboratory tests and early clinical studies have shown that highly cross-linked polyethylene (PE) markedly improves wear resistance compared to conventional PE. We evaluated this type of PE in two randomized clinical studies using radiostereometric analysis (RSA). The 2- and 3-year follow-up of these studies have already been reported. We found a lower penetration rate for the highly cross-linked PE than for conventional PE. We now report the outcome after 5 years.

Patients and methods 60 patients (61 hips) with a median age of 55 years were randomized to receive either highly cross-linked PE (Durasul) or conventional cemented all-polyethylene sockets of the same design. 55 patients (56 hips) were followed for 5 years. In the second study, 32 patients (64 hips) with a median age of 48 years and with bilateral primary or secondary osteoarthritis of the hip had hybrid total hip arthroplasty with liners made of highly cross-linked PE (Longevity) on one side and conventional PE on the other. 23 patients in this study have passed the 5-year follow-up.

Results Bedding-in and creep for the Durasul all-PE was reached by 2 years, and by 1 year for the Longevity liners. In both control groups with conventional PE, this was reached by 6 months. The steady-state wear rate was close to zero in the two study groups and 0.06 mm/ year for the conventional PE in the two control groups.

Interpretation We found that use of highly crosslinked PE instead of conventional PE reduced the wear by more than 95%, which supports continued use of this type of PE in young, active patients.     

The effects of ACL deficiency on mediolateral translation and varus-valgus rotation

Background The anterior cruciate ligament (ACL) constrains the anterior translation and axial rotation of the tibia. However, the effect of ACL injury on the mediolateral translation and varus-valgus rotation of the tibia is unknown. Because of the oblique orientation of the ACL, we hypothesized that ACL deficiency alters mediolateral translation and varus-valgus rotation.

Methods The kinematics of 9 cadavers from full extension to 90° of flexion under various loading conditions were measured before and after ACL resection using a robotic testing system.

Results ACL deficiency increased the medial translation of the tibia and valgus rotation, especially at 15° and 30° of flexion. For example, at 15°, ACL deficiency increased the medial translation from 1.2 (SD 0.9) mm to 1.8 (SD 1.1) mm in response to a quadriceps load. The valgus rotation also increased from 0.8° (SD 0.6) to 1.7° (SD 0.8).

Interpretation ACL deficiency altered both the mediolateral tibial translation and valgus-varus rotation under various loading conditions. The increased medial tibial translation could shift the contact in the medial compartment towards the medial tibial spine, a region where degeneration is observed in ACL-deficient patients. In addition to restoring anterior laxity, ACL reconstruction might need to restore the mediolateral translation of the tibia and varus-valgus rotation of the knee.