Highly water-soluble mast cell stabiliser-encapsulated solid lipid nanoparticles with enhanced oral bioavailability

Cromolyn sodium (CS), a mast cell stabiliser, is widely employed for the prevention and treatment of allergic conditions. However, high hydrophilicity and poor oral permeability hinder its oral clinical translation. Here, solid lipid nanoparticles (SLNs) have been developed for the purpose of oral bioavailability enhancement. The CS–SLNs were engineered by double emulsification method (W₁/O/W₂) and optimised by using Box–Behnken experimental design. The surface and solid-state characterisations revealed the presence of CS in an amorphous form without any interactions inside the spherical-shaped SLNs. The in-vitro release study showed an extended release up to 24?hr by diffusion controlled process. Ex-vivo and in-vivo intestinal permeation study showed ～2.96-fold increase in permeability of CS by presentation as SLNs (p?<?0.05). Further, in-vivo pharmacokinetic study exhibited ～2.86-fold enhancements in oral bioavailability of CS by encapsulating inside SLNs, which clearly indicate that SLNs can serve as the potential therapeutic carrier system for oral delivery of CS.     

Solid self-nanoemulsifying drug delivery system (SNEDDS) for enhanced oral bioavailability of poorly water-soluble tacrolimus: physicochemical characterisation and pharmacokinetics

Abstract

To develop a novel self-nanoemulsifying drug delivery system (solid SNEDDS) with better oral bioavailability of tacrolimus, the solid SNEDDS was obtained by spray-drying the solutions containing the liquid SNEDDS and colloidal silica. Its reconstitution properties were determined and correlated to solid state characterisation of the powder. Moreover, the dissolution and pharmacokinetics in rats was done in comparison to the commercial product. Among the liquid SNEDDS formulations tested, the liquid SNEDDS comprised of Capryol PGMC, Transcutol HP and Labrasol (10:15:75, v/v/v) presented the highest dissolution rate. In the solid SNEDDS, this liquid SNEDDS was absorbed in the pores and attached onto the surface of the colloidal silica. Drug was present in the amorphous state in it. The solid SNEDDS with 5% w/v tacrolimus produced the nanoemulsions and improved the oral bioavailability of tacrolimus in rats. Therefore, this solid SNEDDS would be a potential candidate for enhancing the oral bioavailability of tacrolimus.     

Nanocrystals for enhancement of oral bioavailability of poorly water-soluble drugs

Nanocrystals, a carrier-free colloidal delivery system in nano-sized range, is an interesting approach for poorly soluble drugs. Nanocrystals provide special features including enhancement of saturation solubility, dissolution velocity and adhesiveness to surface/cell membranes. Several strategies are applied for nanocrystals production including precipitation, milling, high pressure homogenization and combination methods such as NanoEdge™, SmartCrystal and Precipitation-lyophilization-homogenization (PLH) technology. For oral administration, many publications reported useful advantages of nanocrystals to improve in vivo performances i.e. pharmacokinetics, pharmacodynamics, safety and targeted delivery which were discussed in this review. Additionally, transformation of nanocrystals to final formulations and future trends of nanocrystals were also described.     

Enhancement of oral bioavailability of the poorly water-soluble drug silybin by sodium cholate/ phospholipid-mixed micelles

Aim:

To evaluate a mixed micellar drug delivery system composed of sodium cholate and phospholipid for oral administration of silybin, a promising hepatoprotectants.

Methods:

The optimum formulation of sodium cholate/phospholipid-mixed micelles containing silybin was obtained based on the study of pseudo-ternary phase diagram. The dissolution of silybin-mixed micelles was investigated. The pharmacokinetic characteristics and bioavailability after oral administration of silybin-mixed micelles and silybin-N-methylglucamine were compared in dogs.

Results:

The mean particle size of prepared mixed micelles was 75.9±4.2 nm. The largest solubility of silybin was found to be 10.0±1.1 mg/mL in the optimum formulation of mixed micelles. The silybin-sodium cholate/phospholipid-mixed micelles showed a very slow release of silybin 17.5% (w/w) within 72 h in phosphate buffer (pH 7.4) and 15.6% (w/w) in HCl solution (pH 1.2). After oral administration to dogs, the relative bioavailability of mixed micelles versus silybin-N-methylglucamine in dogs was 252.0%.

Conclusion:

Sodium cholate/phospholipid-mixed micelles are promising carriers in orally delivery of silybin, considering their capability of enhancing bioavailability and large-scale production.     

Lipid-based formulations to enhance oral bioavailability of the poorly water-soluble drug anethol trithione: Effects of lipid composition and formulation

This study has explored the use of lipid-based formulations to enhance the oral bioavailability of the poorly water-soluble drug anethol trithione (ATT), and compared the performance of different formulations. Two groups of lipid-based formulations, sub-microemulsion (SME) and oil solution, were prepared using short (SCT), medium (MCT) and long (LCT) chain triglycerides respectively; aqueous suspension was used as the reference formulation. In vitro and in vivo studies were conducted to investigate the impact of lipid composition and formulation on drug absorption. In vitro digestion was used to analyze lipid digestion rates and drug distribution/solubilization. After in vitro digestion, the performance rank order for drug solubilization was SCT < MCT < LCT. SME formulations were digested more rapidly in vitro than oil solutions. The bioavailability of the drug from different formulations was investigated in rats. All six lipid-based formulations enhanced drug absorption compared to the aqueous suspension. For the SMEs, which were rapidly digested, in vivo bioavailability increased in accordance with the increase of solubilization data obtained by in vitro digestion, with the rank order SCT-SME < MCT-SME < LCT-SME. For the oil solutions, which were digested more slowly, there was no significant difference in drug bioavailability for the different formulations. In conclusion, lipid-based formulations can enhance the oral bioavailability of ATT, and for this BCS class II drug, both the lipid composition and type of lipid formulation are likely to govern in vivo performance.     

Microemulsions as drug delivery systems to improve the solubility and the bioavailability of poorly water-soluble drugs

Importance of the field: Microemulsions have been studied extensively as potential drug delivery vehicles for poorly water-soluble drugs. An understanding of the physicochemical and biopharmaceutical characteristics of the microemulsions according to administration routes will provide guidance for designing the formulations of microemulsions.

Areas covered in this review: In this paper, the use and the characteristics of microemulsions as drug delivery vehicles are reviewed. As the formulations of the microemulsion always include a great amount of surfactant and co-surfactant, which may cause hemolysis or histopathological alterations of the tissue, the potential toxicity or the irritancy of microemulsions is also discussed in this paper.

What the reader will gain: Developments of microemulsions for poorly water-soluble drugs in recent years are included in this review. Several factors limiting the commercial or clinical use of microemulsions are also discussed.

Take home message: Considering the potential in enhanced drug uptake/permeation and facing the limitations, their unique properties make microemulsions a promising vehicle for poorly water-soluble drugs.     

Functions of lipids for enhancement of oral bioavailability of poorly water-soluble drugs

Lipid-based formulations encompass a diverse group of formulations with very different physical appearance, ranging from simple triglyceride vehicles to more sophisticated formulations such as self-emulsifying drug delivery systems (SEDDS). Lipid-based drug delivery systems may contain a broad range of oils, surfactants, and co-solvents. They represent one of the most popular approaches to overcome the absorption barriers and to improve the bioavailability of poorly water-soluble drugs. Diversity and versatility of pharmaceutical grade lipid excipients and drug formulations as well as their compatibility with liquid, semi-solid and solid dosage forms make lipid systems most complex. Digestion of triglyceride lipids, physicochemical characteristics and solubilisation of lipid digestion products as well as intestinal permeability are some of the variable parameters of such formulations. Furthermore, among the factors affecting the bioavailability of the drug from lipid-based formulations are the digestion of lipid, the mean emulsion droplet diameter, the lipophilicity of the drug and the type of lipids. The solubility of the Active Pharmaceutical Ingredient in the Lipid System, the desorption/sorption isotherm and the digestibility of lipid vehicle are important issues to be considered for formulations of isotropic lipid formulations. This review also describes the fate of lipid formulations in the gut and the factors influencing the bioavailability from lipid-based formulations. Novel formulation systems and currently marketed products conclude this review.     

Solid lipid nanoparticles (SLNs) to improve oral bioavailability of poorly soluble drugs

The purpose of this work was to improve the oral bioavailability of poorly soluble drugs by incorporation into solid lipid nanoparticles (SLNs). All-trans retinoic acid (ATRA) was used as a poorly soluble model drug. Different formulations of SLNs loaded with ATRA were successfully prepared by a high-pressure homogenization method and using Compritol 888 ATO as lipid matrix. The particle size and distribution, drug loading capacity, drug entrapment efficiency (EE %), zeta potential, and long-term physical stability of the SLNs were investigated in detail. Drug release from two sorts of ATRA-SLN was studied and compared with the diffusion from ATRA solution in 0.1 M HCl, distilled water and phosphate buffer (pH 7.40), using a dialysis bag method. A pharmacokinetic study was conducted in male rats after oral administration of 8 mg kg(-1) ATRA in different formulations and it was found that the relative bioavailability of ATRA in SLNs was significantly increased compared with that of an ATRA solution. The amount of surfactant also had a marked effect on the oral absorption of ATRA with SLN formulations. Although an emulsion formulation also increased ATRA absorption, it was too unstable for use in clinical situations. The absorption mechanism of the SLN formulations was discussed. These results indicate that ATRA absorption is enhanced significantly by employing SLN formulations. SLNs offer a new approach to improve the oral bioavailability of poorly soluble drugs.     

Amorphous solid dispersions and nano-crystal technologies for poorly water-soluble drug delivery

Poor water-solubility is a common characteristic of drug candidates in pharmaceutical development pipelines today. Various processes have been developed to increase the solubility, dissolution rate and bioavailability of these active ingredients belonging to BCS II and IV classifications. Over the last decade, nano-crystal delivery forms and amorphous solid dispersions have become well established in commercially available products and industry literature. This article is a comparative analysis of these two methodologies primarily for orally delivered medicaments. The thermodynamic and kinetic theories relative to these technologies are presented along with marketed product evaluations and a survey of commercial relevant scientific literature.     

Development of clinical dosage forms for a poorly water-soluble drug II: formulation and characterization of a novel solid microemulsion preconcentrate system for oral delivery of a poorly water-soluble drug

The solution of a poorly water-soluble drug in a liquid lipid-surfactant mixture, which served as a microemulsion preconcentrate, was converted into a solid form by incorporating it in a solid polyethylene glycol (PEG) matrix. The solid microemulsion preconcentrates thus formed consisted of Capmul PG8 (propylene glycol monocaprylate) as oil, Cremophor EL (polyoxyl 35 castor oil) as surfactant, and hydrophilic polymer PEG 3350 as solid matrix. The drug (aqueous solubility: 0.17 microg/mL at pH 1-8 and 25 degrees C) was dissolved in a melt of the mixture at 65-70 degrees C and then the hot solution was filled into hard gelatin capsules; the liquid gradually solidified upon cooling below 55 degrees C. The solid system was characterized by differential scanning calorimetry (DSC), scanning electron microscopy (SEM), confocal Raman microscopy (CRM), and the dispersion testing in water. It was confirmed that a solid microemulsion preconcentrate is a two-phase system, where clusters of crystalline PEG 3350 formed the solid structure (m.p. 55-60 degrees C) and the liquid microemulsion preconcentrate dispersed in between PEG 3350 crystals as a separate phase. The drug remained dissolved in the liquid phase. In vitro release testing showed that the preconcentrate dispersed readily in water forming a microemulsion with the drug dissolved in the oil particles (<150 nm) and the presence of PEG 3350 did not interfere with the process of self-microemulsification.     

Optimized self-microemulsifying drug delivery systems (SMEDDS) for enhanced oral bioavailability of astilbin

The main purpose of this research work was to design an optimized self micro-emulsifying drug delivery system (SMEDDS) to enhance the bioavailability of the poor water soluble drug, astilbin. The solubility of astilbin was evaluated in various vehicles. Pseudoternary phase diagrams were used to select the components and their ranges by evaluating the micro-emulsification area. Central composite design was applied to optimize the properties of the formulation, including particle size, polydispersity index, drug loading capacity and effective intestinal permeability. The optimized SMEDDS characteristics were investigated including the study of factors influencing particle size and showed the stability of microemulsion when varying the pH and volume of diluents. In vitro drug release profile study was performed using the reverse dialysis method where 95% of the drug was released after 4 h. The developed astilbin SMEDDS was subjected to bioavailability studies in beagle dogs by LC-MS and showed a significant enhancement of bioavailability, indicating the possibility of using SMEDDS as possible drug carrier for astilbin.     

Solid lipid nanoparticles for parenteral drug delivery

This review describes the use of nanoparticles based on solid lipids for the parenteral application of drugs. Firstly, different types of nanoparticles based on solid lipids such as "solid lipid nanoparticles" (SLN), "nanostructured lipid carriers" (NLC) and "lipid drug conjugate" (LDC) nanoparticles are introduced and structural differences are pointed out. Different production methods including the suitability for large scale production are described. Stability issues and drug incorporation mechanisms into the particles are discussed. In the second part, the biological activity of parenterally applied SLN and biopharmaceutical aspects such as pharmacokinetic profiles as well as toxicity aspects are reviewed.     

Solid lipid nanoparticles for ocular drug delivery

Ocular drug delivery remains challenging because of the complex nature and structure of the eye. Conventional systems, such as eye drops and ointments, are inefficient, whereas systemic administration requires high doses resulting in significant toxicity. There is a need to develop novel drug delivery carriers capable of increasing ocular bioavailability and decreasing both local and systemic cytotoxicity. Nanotechnology is expected to revolutionize ocular drug delivery. Many nano-structured systems have been employed for ocular drug delivery and yielded some promising results. Solid lipid nanoparticles (SLNs) have been looked at as a potential drug carrier system since the 1990s. SLNs do not show biotoxicity as they are prepared from physiological lipids. SLNs are especially useful in ocular drug delivery as they can enhance the corneal absorption of drugs and improve the ocular bioavailability of both hydrophilic and lipophilic drugs. SLNs have another advantage of allowing autoclave sterilization, a necessary step towards formulation of ocular preparations. This review outlines in detail the various production, characterization, sterilization, and stabilization techniques for SLNs. In-vitro and in-vivo methods to study the drug release profile of SLNs have been explained. Special attention has been given to the nature of lipids and surfactants commonly used for SLN production. A summary of previous studies involving the use of SLNs in ocular drug delivery is provided, along with a critical evaluation of SLNs as a potential ocular delivery system.     

Solid lipid nanoparticles for topical drug delivery

Solid lipid nanoparticles (SLN) have shown interesting potential as a drug delivery system for the topical delivery of various drugs. However, their performance when applied to the skin has not been fully investigated because of the complexity of their composition and structure. Theoretically, drug can be targeted systemically to the vasculature in the dermis, locally to the skin strata, or superficially to the surface of the skin. Therefore, the topical delivery vehicle should be designed according to the desired therapeutic purposes. To understand drug permeation behavior, it is essential to elucidate the pattern of drug release from the SLN formulations. A number of different drug release patterns have been outlined in the literature, and these patterns have been found to be related to the manufacturing process of the vehicle. In this paper, we summarize the results of SLN-mediated skin penetration data in the literature and illustrate several theoretical mechanisms of SLN-skin interactions that might take place at the site of action. Substantial research dedicated to the development of this promising drug delivery system is still required.