Surfactant-free microspheres of Poly(ε-caprolactone)/poly (ethylene glyco I )/poly(ε-caprolactone) triblock copolymers as a protein carrier

The aim of this study is to prepare biodegradable microspheres without the use of surfactants or emulsifiers for a novel sustained delivery carriers of protein drugs. A poly(epsilon-caprolactoney poly(ethylene glycol)/poly(epsilon-caprolactone) (CEC) triblock copolymer was synthesized by the ring-opening of epsilon-caprolactone with dihydroxy poly (ethylene glycol) to prepare surfactant-free microspheres. When dichloromethane (DCM) or ethyl formate (EF) was used as a solvent, the formation of microspheres did not occur. Although the microspheres could be formed prior to lyophilization under certain conditions, the morphology of microspheres was not maintained during the filtration and lyophilization process. Surfactant-free microspheres were only formed when ethyl acetate (EA) was used as the organic solvent and showed good spherical microspheres although the surfaces appeared irregular. The content of the protein in the microsphere was lower than expected, probably because of the presence of water channels and pores. The protein release kinetics showed a burst release until 2 days and after that sustained release pattern was showed. Therefore, these observations indicated that the formation of microsphere without the use of surfactant is feasible, and, this the improved process, the protein is readily incorporated in the microsphere.     

Silk coating on poly(ε-caprolactone) microspheres for the delayed release of vancomycin

The treatment of osteomyelitis remains a challenge for orthopaedic surgeons. Controlled release of vancomycin from biodegradable microspheres is a promising method for eliminating infection. However, the large initial burst release may make it difficult to maintain the local vancomycin concentration superior to minimum inhibitory concentration for several weeks. The aims of this study were to explore applications of the silk fibroin (SF) as an aqueous coating material for vancomycin-loaded poly(ε-caprolactone) (PCL) microspheres, and investigate the effects of silk coating on in vitro drug release. Examinations of particle size analyses, vancomycin content, Fourier transform infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy and in vitro drug release were performed. The results showed that silk coating could reduce the large initial burst release and retard the vancomycin release. Therefore, we suggest that the SF could be used as an aqueous coating material for vancomycin-loaded PCL microspheres and prolonged the drug release. SF coating on vancomycin-loaded PCL microspheres may be considered as an effective approach to prolong the drug release and improve the anti-infection effects.     

Silk coating on poly(ε-caprolactone) microspheres for the delayed release of vancomycin

The treatment of osteomyelitis remains a challenge for orthopaedic surgeons. Controlled release of vancomycin from biodegradable microspheres is a promising method for eliminating infection. However, the large initial burst release may make it difficult to maintain the local vancomycin concentration superior to minimum inhibitory concentration for several weeks. The aims of this study were to explore applications of the silk fibroin (SF) as an aqueous coating material for vancomycin-loaded poly(ε-caprolactone) (PCL) microspheres, and investigate the effects of silk coating on in vitro drug release. Examinations of particle size analyses, vancomycin content, Fourier transform infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy and in vitro drug release were performed. The results showed that silk coating could reduce the large initial burst release and retard the vancomycin release. Therefore, we suggest that the SF could be used as an aqueous coating material for vancomycin-loaded PCL microspheres and prolonged the drug release. SF coating on vancomycin-loaded PCL microspheres may be considered as an effective approach to prolong the drug release and improve the anti-infection effects.     

Functionalized three-arm poly(ε-caprolactone) maleic acid microspheres for controlled protein release

Introduction

The objective of this work was to fabricate a novel class of protein carriers from double-bond-functionalized multiarm poly(ε-caprolactone) maleic acid (PGCLM) microspheres and to examine protein sustained-release profiles in vitro over a period of a few months.

Methods

The double-emulsion technique was used to formulate terminal functionalized three-arm PGCLM microspheres having three different types of functional groups (-OH, -COOH, and -C = C-), and one of the functional groups (>C = C< bonds) was used to formulate surface-crosslinked microspheres (NPGCLM). Ovalbumin (OVA) was used as a model protein for examining its release profiles from PGCLM and NPGCLM microspheres in 0.1M phosphate-buffered saline (PBS) at 37°C. These microspheres were also characterized in terms of their morphology, size distribution, and stability.

Results

The mean size of fabricated microspheres ranged from 21.9µm to 51.1µm. An OVA protein was successfully encapsulated into these biodegradable PGCLM microspheres with loading efficiency ranging from 34.2% to 46% (w/w), depending on the ratio of PGCLM to polyvinyl alcohol (PVA) stabilizer. Depending on the polymer to PVA stabilizer ratio, the cumulative OVA release % (w/w) in 0.1M PBS at 37°C ranged from 30% to 40% within 50 days. We further demonstrated the availability of the functional >C = C< bonds on the surface of PGCLM microspheres, which we expect could be used for either covalent binding of bioactive agents or imparting different chemical characteristics onto the surface of the microspheres for broadening of their applications.

Discussion/Conclusion

A method for the preparation of biodegradable microspheres from water/oil emulsion of multiarm and functionalized poly(ε-caprolactone) [PGCL, PGCLM, and NPGCLM] was reported as a potential means of developing injectable therapeutic formulations for drugs. The most unique aspect of these biodegradable microspheres is the availability of two functional groups (>C = C< bonds and -COOH pendant group) on the microsphere surface for potential additional chemical or/and biochemical modifications, such as the formation of crosslinked network surface structure. The incorporation of terminal hydrophilic functional maleic acid into hydrophobic three-arm PGCL chains significantly improved the loading efficiency of OVA and its release profiles. These functionalized biodegradable microspheres may provide a good alternative to linear aliphatic polyester-based drug delivery systems and resulted in development of a long-acting, injectable drug carrier for sustained drug release over a period of few months.     

Comparative studies of poly(ε-caprolactone) and poly(D,L-lactide) as core materials of polymeric micelles

Polymeric micelles have been successfully used to deliver a variety of therapeutic agents. Nonetheless, several limitations and considerations must be clarified and well-studied to achieve the highest therapeutic effect. In this study, a series of methoxy poly(ethylene glycol)-block-poly(ε-caprolactone) (PEG-b-PCL) and methoxy poly(ethylene glycol)-block-poly(D,L-lactide) (PEG-b-PLA) with varying molecular weight (MW) of hydrophobic core segment were synthesized. These block copolymers can form micelle with PCL or PLA as core-forming blocks and PEG as a coronal material. The effect of MW on micelle size and critical micelle concentration (CMC) was studied. DOX (DOX) was encapsulated inside the micelle core. Drug-loading content and size of micelles were studied. Drug release studies inside cells were evaluated by confocal laser scanning microscopy. In summary, the PLA core which is less hydrophobic than PCL showed higher CMC, smaller micelle size and faster DOX release inside nucleus.     

Hydrocortisone-loaded poly(ε-caprolactone) nanoparticles for atopic dermatitis treatment

Atopic dermatitis (AD) is a chronic inflammatory skin condition that affects mostly young infants. The purpose of this research was to achieve a prolonged drug release and the reduction of side effects with hydrocortisone-loaded nanoparticles (NPs), for AD treatment. Poly(ε-caprolactone) (PCL) NPs were prepared by modified solvent displacement method and were characterized in terms of size, potential zeta, morphology, entrapment efficiency (EE), Fourier transform infrared (FT-IR) spectrometry and in vitro permeation studies using Franz cells. Toxicology of this nanosystem was also assessed. The obtained NPs EE showed an increased size and a more homogenous size distribution after loading and were negatively charged. EF was around 62%. In vitro release studies demonstrated a controlled release of drug from the NPs over time. FT-IR analysis showed the system stability for one week. Permeation studies revealed significant differences in the permeation of encapsulated and free hydrocortisone. In vitro toxicity studies showed no effect of drug toxicity after encapsulation. The study seems to indicate that encapsulation of hydrocortisone in PCL NPs could enable a faster control of the disease and a decrease in the side effects associated to the long-term application of corticosteroids.     

Efficacy of methotrexate-loaded poly(ε-caprolactone) implants in Ehrlich solid tumor-bearing mice

Abstract

Context: Methotrexate (MTX) is used in the treatment of malignancies; however, its clinical application is limited by its toxic dose-related side effects. An alternative to overcome the toxicity of the MTX in healthy tissues is the design of an implantable device capable of controlling the delivery of this drug for an extended period within the tumor site.

Objective: To develop methotrexate-loaded poly(ε-caprolactone) implants (MTX PCL implants) and to demonstrate their efficacy as local drug delivery systems capable of inhibiting Ehrlich solid tumor bearing mice.

Materials and methods: MTX PCL implants were produced by the melt-molding technique and were characterized by FTIR, WAXS, DSC and SEM. The in vitro and in vivo release of MTX from the PCL implants was also evaluated. The efficacy of implants in inhibiting tumor cells in culture and the solid tumor in a murine model was revealed.

Results and discussion: The chemical and morphological integrity of the drug was preserved into the polymeric matrix. The in vitro and in vivo release processes of the MTX from the PCL implants were modulated by diffusion. MTX diffused from the implants revealed an antiproliferative effect on tumor cells. Finally, MTX controlled and sustained released from the polymeric implants efficiently reduced 42.7% of the solid tumor in mice paw.

Conclusion: These implantable devices represented a contribution to improve the efficacy and safety of chemotherapy treatments, promoting long-term local drug accumulation in the targeted site.     

Improving physicochemical properties and doxorubicin cytotoxicity of novel polymeric micelles by poly(ε-caprolactone) segments

This study constructed a series of novel micelles based on star-shaped amphiphilic copolymers (sPEC/CDs), and aimed to confirm the important role poly(ε-caprolactone) (PCL) segments played to improve the various properties of micelles. sPEC/CDs, consisting of β-cyclodextrin (β-CD) as a core and monomethoxy poly(ethylene glycol) (mPEG) and PCL diblock copolymers as arms, were synthesized by arm-first method. The critical micelle concentrations (CMC) of sPEC/CDs were determined by fluorescence spectrophotometry using pyrene as a probe. 3-(4, 5-dimethylthiazol-2-yl)- 2,5-diphenyltetrazolium bromide and flow cytometry were used to detect drug cytotoxicity and cellular uptake of the doxorubicin-loaded micelles. Rhodamine-123 cellular accumulation was examined to evaluate the polymer action to P-glycoprotein. It was revealed that, once PCL segment was inserted between β-CD and mPEG, the CMC can be significantly decreased, the drug loading capability greatly improved, and the drug resistance of MCF-7/ADR cells effectively reversed. These findings suggest that sPEC/CDs own potential superiority for cancer therapy as drug carriers.     

Accelerated Degradation of Poly(ε-caprolactone) by Organic Amines

The solid-state degradation of poly(-caprolactone) catalyzed by primary, secondary and tertiary alkylamines was investigated. The degradation process was monitored by weight loss and molecular weight change measured by gel permeation chromatography. Degradation studies were conducted at 37°C in methanol solutions of the alkylamines. Primary alkylamines caused rapid weight loss (i.e., ~90% weight loss in 30 days) that depended on alkylamine concentration, molar ratio of alkylamine to poly(-caprolactone) monomer and alkyl chain length. The secondary alkylamines caused less rapid polymer weight loss (i.e., ~90%) weight loss within 80 days). One tertiary alkylamine (N,N-diisopropylethylamine) showed little catalytic effect while a bicyclic tertiary alkylamine (quinuclidine) was about as catalytic as the primary alkylamines. The degradation products isolated when primary alkylamines were used include both esters and amides indicating that nucleophilic attack by the alkylamines competed with the amine-catalyzed methanolysis reaction. Only ester moieties could be identified in the products from reactions containing secondary and tertiary alkylamines, which indicated that they acted as nucleophilic catalysts. All of the primary alkylamines reduced poly(-caprolactone) molecular weight from about 25,000 to 10,000 within 10 days after which the molecular weight of the remaining solid leveled off even though weight loss continued.     

Preparation and characterization of β-cyclodextrin and poly(acrylic acid) microspheres

Abstract

A method for the preparation of poly(acrylic acid) (PAA) microspheres cross-linked with beta-cyclodextrin (β-CD) is described. The method is based on a water-in-oil (w/o) emulsion solvent evaporation technique which facilitates a condensation reaction between PAA and β-CD. Aqueous solutions of PAA and β-CD were used as the dispersed phase and food grade olive oil was used as the continuous phase. The effect of homogenization speed (used in the preparation of the emulsion), phase volume ratio and cyclodextrin-polymer load on the particle size of the microspheres produced was investigated in a replicated factorial design. Microspheres were sized by light microscopy. The particle size of the microspheres was influenced by all three variables with two significant first order interactions between the variables being observed (homogenization speed with phase volume ratio and homogenization speed with load). A second order interaction between the three principal factors was also observed. Particle size ranged from 16 to 150m, depending on the production variables employed. The yield for the technique was 69.5 × 9.5%. Using selected conditions, microspheres of 15–25 pm size were prepared from a range of PAA with different weight average molecular weights (w). These particles were then characterized for β-CD, free carboxylic acid group content and residual oleic acid.     

Preparation of Tacrolimus loaded micelles based on poly(ɛ-caprolactone)-poly(ethylene glycol)-poly(ɛ-caprolactone)

Self-assembled polymeric micelles are widely applied in drug delivery system. In this study, Tacrolimus (FK506) loaded micelles were prepared based on biodegradable poly(?-caprolactone)-poly(ethylene glycol)-poly(?-caprolactone) (PCEC) copolymers. Micelles were prepared by self-assembly of triblock copolymer PCEC in distilled water triggered by its amphiphilic characteristics. Drug loading and encapsulation efficiency were determined by adjusting the weight ratio of FK506 and PCEC. The particle size distribution and variation of obtained micelles were determined using Malvern laser particle size analyzer, while the spherical geometry was observed on transmission electron microscope (TEM), and the crystallographic assays were fulfilled by X-ray diffractometer (XRD). Besides, in vitro release profile demonstrated a significant difference between rapid release of free Tacrolimus and much slower and sustained release of FK506 loaded micelles. These results suggested that we have successfully prepared Tacrolimus loaded micelles in an improved method which is safer and more efficient. The prepared micelles might be potential carriers for Tacrolimus delivery in immunosuppressive therapy.     

Pharmacokinetic and Tissue Distribution of Orally Administered Cyclosporine A-Loaded poly(ethylene oxide)-block-Poly(ε-caprolactone) Micelles versus Sandimmune® in Rats

Pharmaceutical Research - We have previously reported on a polymeric micellar formulation of Cyclosporine A (CyA) based on poly(ethylene oxide)-block-poly(ε-caprolactone) (PEO5K-b-PCL13K)...     

Characterization of the self assembly of methoxy poly(ethylene oxide)-block-poly(α-benzyl carboxylate-ε-caprolactone) for the solubilization and in vivo delivery of valspodar

The aim of this study was to characterize the nanostructures formed from assembly of poly(ethylene oxide)-bpoly( α-benzyl carboxylate ε-caprolactone) (PEO-b-PBCL) in water, determine the effect of weight fraction of the hydrophilic block( fEO) on their morphology, and to investigate their potential for solubilization and delivery of P-glycoprotein (P-gp) inhibitor, valspodar. Three PEO-b-PBCL block copolymers having fEO ranging from 0.18-0.40 were synthesized. Assembly of PEO-b-PBCL was triggered through a co-solvent evaporation method. The average critical aggregation concentration (CAC) for PEO114-b-PBCL??, PEO???-b-PBCL??, and PEO???-b-PBCL?? was found to be 62, 41, and 23 nM, respectively. A lower rigidity of the hydrophobic domain in nanostructures formed from the assembly of PEO???-b- PBCL?? and PEO???-b-PBCL?? in comparison to PEO???-b-PBCL?? was observed. The morphology of the assembled structures was characterized by transmission electron microscopy (TEM). The TEM images of PEO???-b-PBCL?? (fEO = 0.40) showed the formation of spherical micelles with high polydispersity, whereas the assembly of PEO???-b-PBCL?? (fEO = 0.25) and PEO???-b-PBCL95 (fEO = 0.18) resulted in a mixed population of spherical micelles and vesicles. Valspodar achieved high loading in all the three PEO-b-PBCL nanocarriers reaching aqueous solubility of nearly 2 mg/mL. The morphology of PEO-b-PBCL carrier did not seem to influence the pharmacokinetics of the encapsulated valspodar in rats following intravenous administration. In conclusion, the results show a potential for PEO-b-PBCL nanocarriers as efficient solubilizing agents for delivery of valspodar.     

Biodegradable poly(ɛ-caprolactone)–poly(ethylene glycol) copolymers as drug delivery system

Poly(?-caprolactone)–poly(ethylene glycol) (PCL–PEG) copolymers are important synthetic biomedical materials with amphiphilicity, controlled biodegradability, and great biocompatibility. They have great potential application in the fields of nanotechnology, tissue engineering, pharmaceutics, and medicinal chemistry. This review introduced several aspects of PCL–PEG copolymers, including synthetic chemistry, PCL–PEG micro/nanoparticles, PCL–PEG hydrogels, and physicochemical and toxicological properties.     

Preparation,characterization and in vitro release properties of ibuprofen-loaded microspheres based on polylactide,poly(϶-caprolactone) and their copolymers

In this paper, ibuprofen was encapsulated into microspheres by oil-in-water (o/w) emulsion solvent evaporation method. Biodegradable polymers with certain compositions and characteristics such as polylactide (PLA), poly(?-caprolactone) (PCL) and their block copolymer were used to prepare the microspheres. The results indicate that, under the same processing conditions, the drug entrapment efficiency was similar (～80%) for microspheres prepared with PLA and P(LA-b-CL) (78.7/21.3 by mole), but it was only 25.4% for PCL microspheres. The in vitro drug release rate decreased in the order of PCL, P(LA-b-CL) (78.7/21.3 by mole) and PLA microspheres. PCL microspheres showed more serious burst release during the first day (almost 80%) than P(LA-b-CL) (50%) and PLA microspheres (18%). The complete ibuprofen release duration from the last two kinds of microspheres exceeded 1 month. Characterization of the microspheres by differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and polarized optical microscope (POM) revealed that ibuprofen was amorphous in PCL microspheres and partially crystalline in P(LA-b-CL) and PLA microspheres. The different release behaviour of ibuprofen from the three kinds of microspheres could be attributed to the different crystallinity of the studied polymers and drug dispersion state in polymer matrices. All the above results suggest that the copolymer with a certain ratio of lactide to ?-caprolactone could have potential applications for long-term ibuprofen release.     

Treatments of paclitaxel with poly(vinyl pyrrolidone) to improve drug release from poly(ɛ-caprolactone) matrix for film-based stent

Drug-loaded biodegradable films as a principal part of film-based stent were investigated for controlled drug delivery systems. In this study, solid dispersion technique, a pretreatment method of paclitaxel (PTX), was applied to prepare the PTX-loaded poly(?-caprolactone) (PCL) films. Drug dissolution rates and characteristics of the poly(vinyl pyrrolidone) (PVP)/PTX solid dispersions (SDs) and physical mixtures (PMs) were investigated to show that the PVP/PTX SDs were successfully prepared before being incorporated in biodegradable films. Afterwards, the effect of the application of SDs on improving drug release behavior, weightlessness, crystalline states, and surface and internal morphologies of the films were studied. It was found that, the films with SDs showed a higher drug release rate than the films with PMs or pure PTX. In addition, the content of PVP in the SDs also had impact on drug release behavior: the more PVP in SDs, the faster the drug was released. According to the drug release test and weightlessness study, the possible drug release mechanism was put forward for the films with SDs. The application of solid dispersion technique showed a remarkable effect on improving drug release behavior for film-based biodegradable stent drug delivery systems.     

Polysorbate 80 coated poly (ɛ-caprolactone)-poly (ethylene glycol)-poly (ɛ-caprolactone) micelles for paclitaxel delivery

Physicochemical properties of two anhydrates (α-form and β-form) and three hydrates (hemihydrate, monohydrate and sesquihydrate) of sitafloxacin (STFX), a novel fluoroquinolone antibiotic, were investigated and correlated with the crystal structure of each crystalline form. STFX sesquihydrate showed larger weight change between 1% and 95% relative humidities (RHs) than other crystalline forms. In the crystal of sesquihydrate, STFX molecules form a channel structure where water molecules exist. Contrary to sesquihydrate, water molecules in a monohydrate are located in well-defined and isolated crystallographic sites. The β-form exhibited the worst photostability than any other forms under the irradiation of a D65 lamp. The intramolecular hydrogen bonding in the β-form caused a red shift on the solid-state UV spectrum by prolonging the conjugation system of the quinolone ring, resulting in greater absorption of photoenergy and consequent degradation. Solubility is also affected by the crystalline structure. Standard free energy of the formation of STFX molecule in each crystalline form and/or lattice energy binding STFX molecules to retain the crystal structure might cause a difference in solubility.     

Development characterizations and evaluation of Poly(-ϵ-caprolactone)-based microspheres for hepatitis B surface antigen delivery

The major disadvantage of several currently available vaccines is the need for repeated administrations. The aim of the study was to develop long-acting microspheres based on poly(-?-caprolactone) (PCL) for delivery of recombinant hepatitis B surface antigen (rHBsAg). PCL microspheres were prepared for induction of humoral and cellular immunity by intramuscular administration. Microspheres were characterized for their size, shape, incorporation efficiency, zeta potential, antigen integrity, antigen conformation and immunogenicity. DSC (Differential Scanning Calorimetry) studies revealed that better encapsulation efficiency between high and low mol wt polymer. The Circular Dichorism spectroscopy (CD) of antigen, released from PCL microspheres revealed that the secondary structure of antigen was unperturbed. Antigen integrity was evaluated by SDS-PAGE. Immunization with HBsAg PCL microspheres resulted in upregulation of specific cellular (IFN-γ and IL-2) as well as IgG response in BALB/c mice. Immune responses were found significantly higher than the conventional alum adjuvant following a single intramuscular immunization. These results highlight the enhanced efficiency of these PCL microspheres as an adjuvant and their prospective use in the prevention of hepatitis B.     

Biochar as a sustainable and renewable additive for the production of Poly(ε-caprolactone) composites

Sustainable poly(ε-caprolactone) (PCL) composites can be produced via initiation of polymerization using the surface hydroxyl groups of oxidized biochar nanostructures obtained after liquid-phase exfoliation of biochar. Biochars are stable, renewable, and sustainable carbon-based materials, which in large-scale applications have the potential to mitigate climate change. The biochar used herein is produced by pyrolysis of hardwood waste biomass (e.g. sawdust, branches, bark) and then converted using nitric acid to oxidized biochar (oxbc). Oxbc is directly sonicated in ε-caprolactone to produce the exfoliated analogue (Eoxbc), which is used to promote the ring-opening polymerization of ε-caprolactone. Eoxbc is highly dispersible in this monomer, and thus reactions can be performed under neat conditions. Eoxbc presents sufficient surface hydroxyl groups (?OH) to initiate and facilitate the ring-opening polymerization of ε-caprolactone using tin octoate, organic bases or lipase enzymes as catalysts. The PCL/Eoxbc composites produced present higher crystallinity and increased stiffness when compared to pure PCL. In preliminary studies, Eoxbc also shows a positive effect upon the degradation of PCL under various conditions.