Importance of a biofouling-resistant phospholipid polymer to create a heparinized blood-compatible surface

Heparinization is believed to be one of the methods to suppress thrombus formation on blood-contacting surfaces. However, this study hypothesizes that heparinization alone might not be sufficient to provide a blood-compatible surface; that is, a surface property that resists biofouling is necessary to obtain an effective heparin-modified surface. 2-Methacryloyloxyethyl phosphorylcholine (MPC) polymers with 2-aminoethyl methacrylate (AEMA) were synthesized to immobilize heparin through ionic bonding. The primary amino groups of AEMA were considered to be the polymer surface because the ζ-potential of the surface was positive when the mole fraction of the AEMA units was above 0.2. The antithrombogenic character of the polymer surface modified with heparin was evaluated by both Lee-White and microsphere column methods. The coagulation period of human whole blood in the absence of anticoagulant in glass tubing coated with the MPC polymer was longer than that in the original glass tube. Cell adhesion was completely inhibited on the MPC polymer surface after contact with human whole blood without anticoagulant. However, many adherent blood cells were observed on poly(2-ethylhexyl methacrylate-co-AEMA) (no MPC unit) even after heparinization. These results strongly indicate that the MPC polymer is a useful substrate where the heparin works well and that the heparin-immobilized MPC polymer has superior blood compatibility to the simple MPC polymer.     

Preparation of a PEG-grafted phospholipid Langmuir-Blodgett monolayer for blood-compatible material

In order to develop a versatile model for blood-compatible materials, we studied morphology and platelet adhesion of a dipalmitoyl-phosphatidylcholine (DPPC)/dipalmitoyl-phosphatidylethanolamine-polyethylene glycol (PEG lipid) mixed monolayer. This monolayer, which mimics the cell membrane structure, consists of two heterogeneous layers, that is, a PEG layer lying on top of a phospholipid monolayer. The DPPC/PEG lipid mixed monolayer was prepared using the Langmuir-Blodgett (LB) Technique. The monolayer was transferred onto a silanized glass substrate by the down-stroke mode, at a surface pressure of 25 mN/m. The transfer efficiency achieved unity at all times. The morphologies of PEG chains on the phospholipid monolayer in water, in a dried state, and in a hydrated state were evaluated using Pi-A isotherm, ellipsometry, and atomic force microscopy (AFM), respectively. When the concentration of PEG lipid was below 1 mol %, the PEG chains could cover the DPPC surface completely in water, but not in the dried state. On the other hand, the PEG chains could cover the phospholipid surface completely in a dried state, as well as in water, when the PEG lipid concentration was above 3 mol %. These PEG chains, showing a brush-type conformation in water, were highly packed and had a bulky structure at the surface in the dried state as well as in the hydrated state. A bulky and extended PEG layer, above 3 mol % concentration, was greatly effective in the prevention of platelet adhesion.     

Photo-immobilization of a phospholipid polymer for surface modification

A photo-reactive polymer having a phospholipid polar group was prepared, and the polymer was photo-immobilized on polymeric surfaces, where its interactions with biocomponents were investigated. By using a photo-immobilization method, the polymer was used for surface modification of polyethylene and polypropylene, polymers whose surfaces were not treated in our previous development of the phosphorylcholine-derived polymer. The photo-reactive polymer was synthesized by a coupling reaction involving copolymer consisting of 2-methacryloyloxyethyl phosphorylcholine and methacrylic acid with 4-azidoaniline. When the polymer was unpattern immobilized on the surface, X-ray photo-electron spectroscopic analysis and static contact angle measurements were performed. It was shown that the surface was covered with phospholipid polar groups. Micropattern immobilization was carried out using a micropatterned photo-mask. Measurements using atomic force microscopy showed that the swelled micropatterned polymer was five times as thick as the dried one. Protein adsorption and platelet adhesion were reduced on the polymer-immobilized regions. Mammalian cells did not adhere, and formed aggregates on the immobilized regions. In conclusion, the photo-reactive phospholipid polymer was covalently immobilized on the conventional polymer surfaces and it tended to reduce interactions with proteins and cells.     

Competitive adsorption between phospholipid and plasma protein on a phospholipid polymer surface

Abstraet-The competitive adsorption of proteins and phospholipids on ω-methacryloyloxyalkyl phosphorylcholine (MAPC) polymer was evaluated in this study. Albumin, fibrinogen, and dimyrstoyl phosphatidylcholine (DMPC) were used as model components. The amount of DMPC adsorbed on the MAPC polymers increased with an increase in the MAPC unit composition of the polymer. The methylene chain length of the MAPC unit was another factor influencing the DMPC adsorption when the MAPC unit composition of the MAPC polymer was low. The state of albumin and DMPC liposome adsorbed on the 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer was determined by dynamic contact angle (DCA) measurement. The adsorption strength of albumin on the MPC polymer was weaker than that on the poly[n-butyl methacrylate (BMA)], that is, the albumin was detached from the MPC polymer during the rinsing process. On the poly(BMA) surface, no difference in the shape of the DCA loops before and after contact with the DMPC liposomal suspension was observed. Fibrinogen adsorption on the MAPC polymer was detected by gold-colloid labeled immunoassay. The amount of fibrinogen adsorbed on every MAPC polymer surface was reduced by addition of the DMPC liposome in the fibrinogen solution. The number of platelets adhered on the MAPC polymer was also decreased when the DMPC liposome was present in the fibrinogen solution during pretreatment. We concluded that phospholipids were preferentially adsorbed on the MAPC polymer surface compared with plasma protein and that the adsorbed phospholipids played an important role in showing an excellent blood compatibility on the MAPC polymer.     

Competitive adsorption between phospholipid and plasma protein on a phospholipid polymer surface.

The competitive adsorption of proteins and phospholipids on omega-methacryloyloxyalkyl phosphorylcholine (MAPC) polymer was evaluated in this study. Albumin, fibrinogen, and dimyrstoyl phosphatidylcholine (DMPC) were used as model components. The amount of DMPC adsorbed on the MAPC polymers increased with an increase in the MAPC unit composition of the polymer. The methylene chain length of the MAPC unit was another factor influencing the DMPC adsorption when the MAPC unit composition of the MAPC polymer was low. The state of albumin and DMPC liposome adsorbed on the 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer was determined by dynamic contact angle (DCA) measurement. The adsorption strength of albumin on the MPC polymer was weaker than that on the poly[n-butyl methacrylate (BMA)], that is, the albumin was detached from the MPC polymer during the rinsing process. On the poly(BMA) surface, no difference in the shape of the DCA loops before and after contact with the DMPC liposomal suspension was observed. Fibrinogen adsorption on the MAPC polymer was detected by gold-colloid labeled immunoassay. The amount of fibrinogen adsorbed on every MAPC polymer surface was reduced by addition of the DMPC liposome in the fibrinogen solution. The number of platelets adhered on the MAPC polymer was also decreased when the DMPC liposome was present in the fibrinogen solution during pretreatment. We concluded that phospholipids were preferentially adsorbed on the MAPC polymer surface compared with plasma protein and that the adsorbed phospholipids played an important role in showing an excellent blood compatibility on the MAPC polymer.     

Nano-scale surface modification of a segmented polyurethane with a phospholipid polymer

Nano-scale modification of a segmented polyurethane (SPU) with cross-linked 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer was performed to obtain a biocompatible elastomer. To control the domain size and the depth of the modified layer, various compositions of monomers, including MPC, 2-ethylhexyl methacrylate (EHMA), and glycerol 1,3-diglycerolate diacrylate, were examined. SPU film was immersed in the monomer solution and visible light irradiation was applied to initiate polymerization to the SPU film that was held by mica to condense MPC units at the surface. The surfaces of the obtained film were analyzed by X-ray photoelectron spectroscopy and water contact angle measurement. The surface density of MPC units changed with the monomer concentration, and the density was the highest when the ratio between MPC and EHMA was 7:3. In modified SPU films, 6- to 25-nm MPC unit-enriched domains were observed and the density of these domains gradually decreased with depth. The sizes of the domains depended on the MPC composition in the monomer solution. The mechanical properties of the modified films as evaluated by tensile strength measurement under wet conditions were not significantly different from those of SPU. With increase in the existence of MPC unit-enriched domains on the MEG film surface, platelet adhesion and activation were remarkably reduced compared to the SPU film. This nano-scale surface modification may be a useful technique for applying elastic polymer biomaterials.     

Preparation of blood-compatible hollow fibers from a polymer alloy composed of polysulfone and 2-methacryloyloxyethyl phosphorylcholine polymer

Blood-compatible hollow fibers were successfully prepared from a polymer alloy composed of polysulfone (PSf) and the 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer. To improve the hydrophilicity, fouling-resistance characteristics, and blood compatibility of the PSf hollow fiber in a hemodialyzer, an MPC polymer that can be blended with PSf was synthesized in order to prepare the polymer alloy (PSf/MPC polymer). The contents of the MPC polymer blended in the PSf were 7 and 15 wt%. The PSf/MPC polymer hollow fiber could be prepared by both wet and dry-wet processing methods. The hollow fiber took an asymmetric structure, that is, the hollow-fiber membrane had a dense skin layer on the porous sponge-like structure. The mechanical strength was higher than that of conventional PSf hollow fibers for hemodialysis. The surface characterization of the PSf/MPC polymer hollow fiber by x-ray photoelectron spectroscopy revealed that the MPC units were concentrated at the surface. The permeability for solutes through the PSf/MPC polymer hollow fibers was measured for 4 h. The permeabilities of both a low-molecular-weight compound and protein were greater than those of the PSf hollow fibers. The amount of adsorbed protein was lower on the PSf/MPC polymer hollow fiber when compared to that of the PSf hollow fiber. Moreover, platelet adhesion was also effectively inhibited on the PSf/MPC polymer hollow fiber. Based on these results, the addition of the MPC polymer to the PSf is a very useful method to improve the functions and blood compatibility of the hollow fiber.     

Creation of a blood-compatible surface: a novel strategy for suppressing blood activation and coagulation using a nitroxide radical-containing polymer with reactive oxygen species scavenging activity

Various polymeric materials have been used in medical devices, including blood-contacting artificial organs. Contact between blood and foreign materials causes blood cell activation and adhesion, followed by blood coagulation. Concurrently, the activated blood cells release inflammatory cytokines together with reactive oxygen species (ROS). We have hypothesized that the suppression of ROS generation plays a crucial role in blood activation and coagulation. To confirm this hypothesis, surface-coated polymers containing nitroxide radical compounds (nitroxide radical-containing polymers (NRP)) were designed and developed. The NRP was composed of a hydrophobic poly(chloromethylstyrene) (PCMS) chain to which 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO) moieties were conjugated via condensation reaction of the chloromethyl groups in PCMS with the sodium alcoholate group of 4-hydroxy-TEMPO. Blood compatibility was investigated by placing NRP-coated beads in contact with rat whole blood. The amount of ROS generated on PCMS-coated beads used as a control increased significantly with time, while NRP-coated beads suppressed ROS generation. It is interesting to note that the suppression of inflammatory cytokine generation by NRP-coated beads was shown to be significantly higher than that by PCMS-coated beads. Both platelet and leukocyte adhesion to the beads were suppressed with increasing TEMPO incorporation in the polymer. These results confirm that the suppression of ROS by NRP prevents inflammatory cytokine generation, which in turn results in the suppression of blood activation and coagulation on the beads.     

Long-term stability in vivo of a thromboresistant heparinized surface

A surface with covalently bonded heparin was tested in an in vivo model. Heparinized and non-heparinized tubings were inserted in the pig aorta. They were left in place for up to 16 wk. After removal they were analysed for their capacity to take up and inhibit thrombin. A comparison was also made with tubings that had not been inserted in animals. The heparin surface showed some specific alterations after implantation but its capacity to inhibit thrombin was not impaired. The heparinized tubings caused less intimai hyperplasia and thrombi than non-heparinized tubings.     

Interaction of heparinized polymer materials with plasma proteins and platelets

Conclusion A negative correlation was found between adsorption of plasma proteins and surface affinity for AT-III. This correlation suggests that maximal activity of surface-bound HP and, therefore, maximal hemocompatibility of polymer material can be attained by minimization of adsorbed plasma proteins. The adsorbed layer is also enriched with AT-III. In addition, a negative correlation in the AT-III-RNAP pair shows that this condition is also necessary for decreasing risk of thrombosis, because it reduces the number of adhered platelets.Thus, high concentration of AT-III in the adsorbed layer is the specific feature of heparinized biomaterials which exerts a fundamental effect on cellular and molecular mechanisms of the interaction of blood with polymer materials.Scientific-Research Institute for Transplantology and Artificial Organs, Russian Ministry of Health, Moscow. Translated from Meditsinskaya Tekhnika, No. 2, pp. 18–22, March–April, 1994.     

Asymmetrically functional surface properties on biocompatible phospholipid polymer membrane for bioartificial kidney

To obtain a bioartificial kidney composed of a porous polymer membrane and renal cells, a polysulfone (PSf) membrane (PSM) blended with 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer was prepared. The PSM flat membrane with a porous structure could be prepared from the polymer blend containing 1 wt % of the MPC polymer in PSf by the phase inversion technique in a dry-wet process. Asymmetrical surface properties were observed on both sides of the membrane surfaces. That is, the sponge layer formed at the substrate-contacting surface of the membrane had 10-20 microm pores, but the pores in the micrometer range could not be observed for a skin layer formed at the air-contacting surface of the membrane. At the sponge layer surface, the MPC unit composition was 7 times larger than that at the skin layer surface. The amount of proteins adsorbed on the surface corresponded to the MPC unit composition. On the skin layer, a small amount of adsorbed proteins and platelet adhesion could be suppressed compared with those on the sponge layer. However, the skin layer had a moderate protein adsorption, so it showed a sufficient cytocompatibility to enable renal tubule epithelial cells to adhere and proliferate in the membrane. Thus, it functioned well as a renal tubule. Therefore, because of both its hemocompatibility and cytocompatibility, we could conclude that the PSM membrane is useful for as a renal tubule device for a bioartificial kidney.     

Controlled drug release from multilayered phospholipid polymer hydrogel on titanium alloy surface

Here we describe the functionalization of a multilayered hydrogel layer on a Ti alloy with an antineoplastic agent, paclitaxel (PTX). The multilayered hydrogel was synthesized via layer-by-layer self-assembly (LbL) using selective intermolecular reactions between two water-soluble polymers, phospholipid polymer (PMBV) containing a phenylboronic acid unit and poly(vinyl alcohol) (PVA). Reversible covalent bonding between phenylboronic acid and the polyol provided the driving force for self-assembly. Poorly water-soluble PTX dissolves in PMBV aqueous solutions because PMBV is amphiphilic. Therefore, our multilayered hydrogel could be loaded with PTX at different locations to control the release profile and act as a drug reservoir. The amount of PTX incorporated in the hydrogel samples increased with the number of layers but was not directly proportional to the number of layers. However, as the step for making layers was repeated, the concentration of PTX in the PMBV layers increased. The different solubilities of PTX in PMBV and PVA aqueous solutions allow for the production of multilayered hydrogels loaded with PTX at different locations. In vitro experiments demonstrated that the location of PTX in the multilayered hydrogel influences the start and profile of PTX release. We expect that this rapid and facile LbL synthesis of multilayered hydrogels and technique for in situ loading with PTX, where the location of loading controls the release pattern, will find applications in biomedicine and pharmaceutics as a promising new technique.     

Osteoblast response to phospholipid modified titanium surface

The objective of this study was to evaluate the effect of different phospholipid coatings on osteoblast responses in vitro. Commercially available phospholipids [phosphatidylcholine (PC), phosphatidyl-serine (PS) and phosphatidylinositol (PI)] were converted to their Ca-PL-PO(4) and were coated on commercially pure titanium (Ti) grade 2 disks. Using uncoated Ti surfaces as controls, cell responses to phospholipid-coated surfaces were evaluated using the American Type Culture Collection (Manassas, VA, USA) CRL-1486 human embryonic palatal mesenchyme cells (HEPM), an osteoblast precursor cell line, over a 14-day period. Total protein synthesis and alkaline phosphatase specific activity at 0, 7, and 14 days were measured. It was observed that Ti surfaces coated with PS exhibited enhanced protein synthesis and alkaline phosphatase specific activity compared to other phospholipids and uncoated surfaces. These results indicate the possible usefulness of PS-coated Ti surfaces for inducing enhanced bone formation and are very encouraging for bone and dental implantology.     

The effect of the chemical structure of the phospholipid polymer on fibronectin adsorption and fibroblast adhesion on the gradient phospholipid surface.

The interaction between biocomponents and the polyethylene (PE) surface modified with poly[omega-methacryloyloxyalkyl phosphorylcholine (MAPC)] was considered taking into account the surface characteristics, i.e., density, mobility, and orientation of the poly(MAPC). The PE surface, grafted gradually with the poly(MAPC) was prepared by corona irradiation method. The amount of peroxide produced on the PE surface which was determined with 1,1-diphenyl-2-picryl-hydrazyl, increased with an increase in the energy of the corona. The surface density of the poly(MAPC) was increased with an increase in the amount of the peroxides produced by the corona irradiation. The orientation and mobility of the poly(MAPC) grafted on the PE surface was evaluated with 1,6-diphenyl-1,3,5-hexatriene. The orientation of the poly[6-methacryloyloxyhexyl phosphorylcholine (MHPC)] which has six methylene chains between the phospholipid polar group and the backbone was higher than that of other poly(MAPC)s. The mobility of the poly(MAPC) decreased with an increase in the methylene chain length in the MAPC unit. The fibronectin adsorption on the gradient PE sheet grafted with poly(MAPC) was determined with enzyme-labeled immunoassay. The amount of adsorbed fibronectin on the PE grafted with poly[2-methacryloyloxyethyl phospohorylcholine(MPC)] and poly(MHPC) decreased with an increase in their surface density. Especially, the PE sheet grafted with the poly(MHPC) was effectively reduced compared with other poly(MAPC)s. On the poly[10-methacryloyloxydecyl phosphorylcholine (MDPC)], there is a minimum amount of adsorbed fibronectin. The fibronectin adsorption pattern on the PE sheet grafted with poly(MAPC) was quite different from the chemical structure of the MAPC unit. The human normal diploid fibroblasts (WI-38 cells) were cultured on the gradient PE sheet grafted with poly(MAPC) changing the concentration of seeded WI-38 cells. The adhesion behavior of the WI-38 cells was different depending on the concentration of the seeded WI-38 cells. When the concentration was low, the number of the adherent WI-38 cells had the same tendency as fibronectin adsorption. The gradient PE sheet grafted with the poly(MHPC) effectively reduced WI-38 cells adhesion even when the concentration of the WI-38 cells was high. The biocompatibility of polymer surfaces can be improved by highly oriented phosphorylcholine group.     

A nonthrombogenic gas-permeable membrane composed of a phospholipid polymer skin film adhered to a polyethylene porous membrane

Polymer membranes are widely used in biomedical applications such as hemodialysis, membrane oxygenator, etc. When the membranes come in contact with blood or body fluids, protein adsorption and cell adhesion occur rapidly. Nonspecific protein adsorption and cell adhesion on the membranes induce not only various bio-rejections but also a decrease in their performance. We hypothesized that a blood compatible gas-permeable membrane could be prepared from polyethylene (PE) porous membranes modified with phospholipid polymers. In this study, poly[(2-methacryloyloxyethyl phosphorylcholine) (MPC)-co-dodecyl methacrylate] (PMD) skin film adhered to a PE porous membrane (PMD/PE porous membrane) was prepared. Elution of PMD was not detected meaning that the PMD film did not detach from the PE porous membrane even after soaking in water for more than 6 months. The permeation coefficient of oxygen gas through the PE membrane with the adhered PMD containing more than 0.20 mole fraction of the MPC unit, was the same as that of the original PE porous membrane. The PMD surface effectively reduced biofouling. We concluded that the PMD/PE porous membrane is useful as a novel membrane oxygenator due to its excellent gas-permeability and blood compatibility.     

Semi-interpenetrating polymer networks composed of biocompatible phospholipid polymer and segmented polyurethane

2-Methacryloyloxyethyl phosphorylcholine (MPC) polymers, which have excellent biocompatibility, have been receiving increasing attention in biomedical and bioengineering fields; however, the mechanical strength of the hydrated MPC polymers is not sufficient for use in these fields as a bulk material. Therefore, we hypothesized that a novel material might be realized by reinforcing the MPC polymer network with segmented polyurethane (SPU). Semi-interpenetrating polymer networks (IPNs) composed of crosslinked MPC polymer and SPU were prepared. The mechanical properties of the IPN membrane were significantly improved compared with those of the MPC polymer membrane. Three-dimensional polymer networks of the MPC polymer in the IPNs were observed after solvent extraction of SPU. An X-ray photoelectron spectrum analysis revealed that the MPC units were exposed on the IPN surface. When the IPN was alternately soaked in water and ethanol, the swelling ratio was found to be completely reversible and no disintegration of the network structure was observed. The permeation coefficient of 1, 4-di(2-hydroxyethoxy)benzene through the IPN membrane was 1.11 x 10(-7) cm(-2)s(-1). The amount of adsorbed protein and the number of adherent platelets on the IPN membrane were effectively reduced compared with those on SPU. We concluded that IPNs composed of the MPC polymer and SPU are a new bulk biomaterial, which possesses both blood compatibility and good mechanical properties.     

UV surface modification of a new nanocomposite polymer to improve cytocompatibility

A novel modified nanocomposite was studied for the adhesion and proliferation of the human umbilical vein endothelial cell (HUVEC) line EA.hy926. The nanocomposite under investigation was poly(carbonate-urea)urethane with silsesquioxane nano-cages, here in the form of a mixture of two polyhedral oligomeric silsesquioxanes. The nanocomposite surfaces were exposed to ultraviolet (UV) light of a Xe(*)(2)-excimer lamp at a wavelength of 172 nm in an ammonia atmosphere. The effects of the irradiation were characterized by atomic force and scanning electron microscopy (AFM, SEM), X-ray photo-electron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FT-IR) using an attenuated total reflection (ATR) device and measurements of advancing water contact angle (CA). The irradiation resulted in the introduction of new hydrophilic N- and O-containing groups into the surface, which was initially amphiphilic, while surface morphology remained mainly unchanged. Slight chemical changes were also observed for the silsesquioxane nano-cages at the surface. Onto the untreated and irradiated samples HUVECs were seeded and grown for various durations in culture. Standard tissue-culture polystyrene (PS) was employed as a positive control to check the efficiency of the cell-culture methods. Viability and proliferation of the cells were then assessed using a non-radioactive assay. Compared to the untreated nanocomposite polymer, irradiation times of at least 5 min resulted in a significantly increased cell proliferation between 3 and 8 days after seeding with the HUVEC line EA.hy926.     

UV surface modification of a new nanocomposite polymer to improve cytocompatibility

A novel modified nanocomposite was studied for the adhesion and proliferation of the human umbilical vein endothelial cell (HUVEC) line EA.hy926. The nanocomposite under investigation was poly(carbonate-urea)urethane with silsesquioxane nano-cages, here in the form of a mixture of two polyhedral oligomeric silsesquioxanes. The nanocomposite surfaces were exposed to ultraviolet (UV) light of a Xe^* ₂-excimer lamp at a wavelength of 172 nm in an ammonia atmosphere. The effects of the irradiation were characterized by atomic force and scanning electron microscopy (AFM, SEM), X-ray photo-electron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FT-IR) using an attenuated total reflection (ATR) device and measurements of advancing water contact angle (CA). The irradiation resulted in the introduction of new hydrophilic N- and O-containing groups into the surface, which was initially amphiphilic, while surface morphology remained mainly unchanged. Slight chemical changes were also observed for the silsesquioxane nano-cages at the surface. Onto the untreated and irradiated samples HUVECs were seeded and grown for various durations in culture. Standard tissue-culture polystyrene (PS) was employed as a positive control to check the efficiency of the cell-culture methods. Viability and proliferation of the cells were then assessed using a non-radioactive assay. Compared to the untreated nanocomposite polymer, irradiation times of at least 5 min resulted in a significantly increased cell proliferation between 3 and 8 days after seeding with the HUVEC line EA.hy926.     

Preparation of a chemically anchored phospholipid monolayer on an acrylated polymer substrate

This paper describes a strategy for designing a chemically anchored phospholipid monolayer that could be used as coating materials for biomedical implants. To make a chemically anchored phospholipid monolayer on the polymer substrate, we prepared the mono-acrylated phospholipid (1-palmitoyl-2-[12-(acryloyloxy)-dodecanoyl]-sn-glycero-3-phosphocholine; acryloyl-PC) and the acrylated polymer (poly(octadecylacrylate-co-4-acryloyloxy butylacrylate)), which was synthesized by the acrylation of poly(octadecyl acrylate-co-hydroxybutyl acrylate, poly(OA-co-HA)) with acryloyl chloride. The chemically anchored phospholipid monolayer was prepared by using in situ photopolymerization of a pre-assembled phospholipid monolayer, produced by lipid vesicle fusion, onto the acrylated polymer coated silicon wafer. Optimal condition of vesicle fusion and irradiation time was determined from the degree of hydrophilicity rendered by the polymerized phospholipid surface. The physicochemical properties of polymerized phospholipid monolayer on the substrate were evaluated using water contact angle, field-emission scanning electron micrograph (FE-SEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). These results confirmed that the polymerized phospholipid monolayer was chemically anchored on the acrylated polymer substrate. The chemically anchored phospholipid monolayer was stable in aqueous condition for 2 weeks, but the physically adsorbed phospholipid monolayer got removed within 1 day. Moreover, the polymerized phospholipid monolayer also suppressed albumin absorption and platelet adhesion, in vitro. This polymerized phospholipid monolayer provides a new biomimetic system for coating medical devises.     

Physical properties and blood compatibility of surface-modified segmented polyurethane by semi-interpenetrating polymer networks with a phospholipid polymer

Segmented polyurethanes, (SPU)s, are widely used in the biomedical fields because of their excellent mechanical property. However, when blood is in contact with the SPU, non-specific biofouling on the SPU occurs which reduces its mechanical property. To obtain novel blood compatible elastomers, the surface of the SPU was modified with 2-methacryloyloxyethyl phosphorylcholine (MPC) by forming a semi-interpenetrating polymer network (semi-IPN). The SPU film modified by MPC polymer with the semi-IPN (MS-IPN film) was prepared by visible light irradiation of the SPU film in which the monomers were diffused. X-ray photoelectron spectroscopy confirmed that the MPC units were exposed on the MS-IPN film surface. The mechanical properties of the MS-IPN film characterized by tensile testing were similar to those of the SPU film. Platelet adhesion on MS-IPN films was also investigated before and after stress loading to determine the effects of the surface modification on the blood compatibility. Many platelets did adhere on the SPU film before and after stress loading. On the other hand, the MS-IPN film prevented platelet adhesion even after repeated stress loading.