A comparative histological study of alginate beads as a promising controlled release delivery for mefenamic acid

The new mefenamic acid-alginate bead formulation prepared by ionotropic gelation method using 3 x 2(2) factorial design has shown adequate controlled release properties in vitro. In the present study, the irritation effects of mefenamic acid (MA), a prominent non-steroidal anti-inflammatory (NSAI) drug, were evaluated on rat gastric and duodenal mucosa when suspended in 0.5% (w/v) sodiumcarboxymethylcellulose (NaCMC) solution and loaded in alginate beads. Wistar albino rats weighing 200 +/- 50 g were used during in vivo animal studies. In this work, biodegradable controlled release MA beads and free MA were evaluated according to the degree of gastric or duodenal damage following oral administration in rats. The gastric and duodenal mucosa was examined for any haemorrhagic changes. Formulation code A10 showing both Case II transport and zero order drug release and t(50) % value of 5.22 h was chosen for in vivo animal studies. For in vivo trials, free MA (100 mgkg(-1)), blank and MA (100 mgkg(-1)) loaded alginate beads (formulation code A10) were suspended in 0.5% (w/v) NaCMC solution and each group was given to six rats orally by gavage. NaCMC solution was used as a control in experimental studies. In vivo data showed that the administration of MA in alginate beads prevented the gastric lesions.     

In vitro and in vivo studies of ibuprofen-loaded biodegradable alginate beads

The irritation effects of ibuprofen, a widely used non-steroidal anti-inflammatory drug (NSAID), were evaluated on mouse gastric and duodenal mucosa when suspended in 0.5% (w/v) sodiumcarboxymethylcellulose (NaCMC) solution and loaded in alginate beads. The ionotropic gelation method was used to prepare controlled release alginate beads of ibuprofen. The influence of various formulation factors on the encapsulation efficiency, as in vitro drug release and micromeritic properties, was investigated. Other variables included the alginate concentration, percentage drug loading and stirring speed during the microencapsulation process. Scanning electron micrographs of alginate beads loaded with ibuprofen showed rough surface morphology and particle sizes in the range of 1.15 +/- 0.4 - 3.15 +/- 0.6 mm. The yield of microspheres, as collected after drying, was generally 80-90%. Formulation code H showing t50% value of 3.5 h was chosen for in vivo trials because of the appropriate drug release properties. For in vivo trials, free ibuprofen (100 mg kg(-1)), blank and ibuprofen (100 mg kg(-1)) loaded alginate beads (formulation code H) were suspended in 0.5% (w/v) NaCMC solution and each group was given to six mice orally by gavage. NaCMC solution was used as a control in experimental studies. In vivo data showed that the administration of ibuprofen in alginate beads prevented the gastric lesions.     

An Anti-Inflammatory Drug (Mefenamic Acid) Incorporated in Biodegradable Alginate Beads: Development and Optimization of the Process Using Factorial Design

The objective of this study was to prepare and evaluate biodegradable alginate beads as a controlled-release system for a water-insoluble drug, mefenamic acid (MA), using 3 × 2² factorial design by ionotropic gelation method. Therefore, the mefenamic acid dispersion in a solution of alginate was dropped into the cross-linking CaCl₂ solution and a fairly high yield (71–89%) of MA-alginate beads were obtained. Their encapsulation efficiencies were in the range of 79.3–98.99%. The effect of drug:polymer ratio, CaCl₂ concentration, and curing time on the time for 50% of the drug to be released (t_50%), and the drug entrapment efficiency were evaluated with factorial design method. It was found that drug:polymer ratio and interaction of drug:polymer ratio and curing time had an important effect on the drug to be released (t_50%). The effect of CaCl₂ concentration is also important on the drug release. On the other hand, all factors except CaCl₂ concentration were effective on the drug entrapment efficiency. The swelling properties of beads were also studied. The release mechanism was described and found to be non-Fickian, Case II, and Super Case II transport for the formulations. This study suggested a new mefenamic acid alginate bead formulation for oral delivery of nonsteroidal anti-inflammatory drugs, which cause gastric irritation.     

An anti-inflammatory drug (mefenamic acid) incorporated in biodegradable alginate beads: development and optimization of the process using factorial design

The objective of this study was to prepare and evaluate biodegradable alginate beads as a controlled-release system for a water-insoluble drug, mefenamic acid (MA), using 3 x 2(2) factorial design by ionotropic gelation method. Therefore, the mefenamic acid dispersion in a solution of alginate was dropped into the cross-linking CaCl(2) solution and a fairly high yield (71-89%) of MA-alginate beads were obtained. Their encapsulation efficiencies were in the range of 79.3-98.99%. The effect of drug:polymer ratio, CaCl(2) concentration, and curing time on the time for 50% of the drug to be released (t(50%)), and the drug entrapment efficiency were evaluated with factorial design method. It was found that drug:polymer ratio and interaction of drug:polymer ratio and curing time had an important effect on the drug to be released (t(50%)). The effect of CaCl(2) concentration is also important on the drug release. On the other hand, all factors except CaCl(2) concentration were effective on the drug entrapment efficiency. The swelling properties of beads were also studied. The release mechanism was described and found to be non-Fickian, Case II, and Super Case II transport for the formulations. This study suggested a new mefenamic acid alginate bead formulation for oral delivery of nonsteroidal anti-inflammatory drugs, which cause gastric irritation.     

Biphasic release characteristics of dual drug-loaded alginate beads

The dual drug-loaded alginate beads simultaneously containing drug in inner and outer layers were prepared by dropping plain (single-layered) alginate beads into CaCl₂ solution. The release characteristics were evaluated in simulated gastric fluid for 2 h followed by intestinal fluids thereafter for 12 h. The surface morphology and cross section of dual drug-loaded alginate beads was also investigated using scanning electron microscope (SEM). The poorly water-soluble ibuprofen was chosen as a model drug. The surface of single-layered and dual drug-loaded alginate beads showed very crude and roughness, showing aggregated particles, surface cracks and rough crystals. The thickness of dual drug-loaded alginate beads surrounded by outer layer was ranged from about 57 to 329μm. The distinct chasm between inner and outer layers was also observed. In case of single-layered alginate beads, the drug was not released in gastric fluid but was largely released in intestinal fluid. However, the release rate decreased as the reinforcing Eudragit^® polymer contents increased. When the plasticizers were added into polymer, the release rate largely decreased. The release rate of dual drug-loaded alginate beads was stable in gastric fluid for 2 h but largely increased when switched in intestinal fluid. The drug linearly released for 4 h followed by another linear release thereafter, showing a distinct biphasic release characteristics. There was a difference in the release profiles between single-layered and dual drug-loaded alginate beads due to their structural shape. However, this biphasic release profiles were modified by varying formulation compositions of inner and outer layer of alginate beads. The release rate of dual drug-loaded alginate beads slightly decreased when the outer layer was reinforced with Eudragit^® RS100 polymers. In case of dual drug-loaded alginate beads with polymer-reinforced outer layer only, the initial amount of drug released was low but the initial release rate (slope) was higher due to more swellable inner cores when compared to polymer-reinforced inner cores. The current dual drug-loaded alginate beads may be used to deliver the drugs in a time dependent manner.     

Preparation andin vitro release of melatonin-loaded multivalent cationic alginate beads

The sustained release dosage form which delivers melatonin (MT) in a circadian fashion over 8 h is of clinical value for those who have disordered circadian rhythms because of its short half-life. The purpose of this study was to evaluate the gelling properties and release characteristics of alginate beads varying multivalent cationic species (Al⁺⁺⁺, Ba⁺⁺, Ca⁺⁺, Mg⁺⁺, Fe⁺⁺⁺, Zn⁺⁺). The surface morphologies of Ca- and Ba-alginate beads were also studied using scanning electron microscope (SEM). MT, an indole amide pineal hormone was used as a model drug. The Ca⁺⁺, Ba⁺⁺, Zn⁺⁺, Al⁺⁺⁺, and Fe⁺⁺⁺ ions except Mg⁺⁺ induced gelling of sodium alginate. The strength of multivalent cationic alginate beads was as follows: Al⁺⁺⁺?Fe⁺⁺⁺<Zn⁺⁺<Ca⁺⁺?Ba⁺⁺. In case of Al⁺⁺⁺, the induced hydrogel beads were very fragile and less spherical. Fe-alginate beads were also fragile but stronger compared to Al-alginate beads. Ba-alginate beads, had a similar gelling strength but was less spherical when compared to Ca-alginate beads. Zn-alginate beads were weaker than Ca- and Ba-alginate beads. Very crude and rough crystals of Ba- and Ca-alginate beads at higher magnifications were observed. However, the type and shape of rough crystals of Ba- and Ca-alginate beads were quite different. No significant differences in release profiles from MT-loaded multivalent cationic alginate beads were observed in the gastric fluid. Most drugs were continuously released upto 80% for 5 h, mainly governed by the passive diffusion without swelling and disintegrating the alginate beads. In the intestinal fluid, there was a significant difference in the release profiles of MT-loaded multivalent cationic alginate beads. The release rate of Ca-alginate beads was faster when compared to other multivalent cationic alginate beads and was completed for 3 h. Ba-alginate beads had a very long lag time (7 h) and then rapidly released thereafter. MT was continuously released from Fe-and Zn-alginate beads with initial burstout release. It is assumed that the different release profiles of multivalent cationic alginate beads resulted from forces of swelling and disintegration of alginate beads in addition to passive diffusion, depending on types of multivalent ions, gelling strength and drug solubility. It was estimated that 0.2 M CaCl₂ concentration was optimal in terms of trapping efficiency of MT and gelling strength of Ca-alginate beads. In the gastric fluid, Ca-alginate beads gelled at 0.2 M CaCl₂ concentration had higher bead strength, resulting in the most retarded release when compared to other concentrations. In the intestinal fluid, the decreased release of Ca-alginate beads prepared at 0.2 M CaCl₂ concentration was also observed. However, release profiles of Ca-alginate beads were quite similar regardless of CaCl₂ concentration. Either too low or high CaCl₂ concentrations may not be useful for gelling and curing of alginate beads. Optimal CaCl₂, concentrations must be decided in terms of trapping efficiency and release profiles of drug followed by curing time and gelling strength of alginate beads.     

Floating-bioadhesive gastroretentive Caesalpinia pulcherrima-based beads of amoxicillin trihydrate for Helicobacter pylori eradication

Abstract

Context: An oral dosage form containing floating bioadhesive gastroretentive microspheres forms a stomach-specific drug delivery system for the treatment of Helicobacter pylori.

Objectives: To prepare and evaluate controlled release floating bioadhesive gastroretentive chitosan-coated amoxicillin trihydrate-loaded Caesalpinia pulcherrima galactomannan (CPG)-alginate beads (CCA-CPG-A), for H. pylori eradication.

Materials and methods: CCA-CPG-A beads were prepared by ionotropic gelation, using 2³ factorial design with quantity of drug, combination of CPG with sodium alginate and concentration of calcium chloride as variables. Beads facilitated mucoadhesion to gastric mucosa with floating nature caused by chitosan coating for wide distribution throughout GIT. Developed beads were evaluated for characteristics like beads size-morphology, entrapment efficiency, DSC, XRD, FTIR, swelling ratio, in vitro mucoadhesion, in vitro drug release, in vitro floating and in vitro H. pylori growth inhibition studies. CCA-CPG-A beads were studied in Wistar rats for in vivo gastric mucoadhesion, in vivo H. pylori growth inhibition studies using PCR amplification of isolated DNA, rapid urease test.

Result: Developed beads possess drug release of 79–92%, entrapment efficiency of 65–89%, mucoadhesion of 61–89%. In vivo mucoadhesion study showed more than 85% mucoadhesion of beads even after 7th hour. In vitro–in vivo growth inhibition study showed complete eradication of H. pylori.

Discussion: CPG-alginate and chitosan in beads interacts with gastric mucosubstrate surface for prolonged gastric residence with floating bioadhesion mechanism for H. pylori eradication in rats.

Conclusion: Floating bioadhesive CCA-CPG-A beads offer a promising drug delivery system for H. pylori eradication at lower dose, reduced adverse effect and enhance bioavailability.     

Preparation and release characteristics of polymer-reinforced and coated alginate beads

Polymeric reinforcement and coatings of alginate beads were carried out to control the release rate of drug from alginate beads. A poorly water-soluble ibuprofen (IPF) was selected as a model drug. A commercially available Eudragit^® RS100 was also used as a polymer. Effects of polymeric contents, the presence of plasticizers and amount of drug loading on the release rate of drug were investigated. The release rate of drug from alginate beads in the simulated gastric fluid did not occur within 2 h but released immediately when dissolution media were switched to the simulated intestinal fluid. No significant difference of release rate from polymer-reinforced alginate bead without plasticizers was observed when compared to plain (simple) beads. However, the release rate of drug from polymer-reinforced alginate beads was further sustained and retarded when aluminium tristearate (AT) as a plasticizer was added to polymer. However, polyethylene glycol 400 (PEG400) did not change the release rate of drug from alginate beads although PEG400 was used to improve dispersion of polymer and sodium alginate, and plasticize Eudragit^® RS100 polymer. The presence of plasticizer was crucial to reinforce alginate gel matrices using a polymer. As the amount of drug loading increased, the release rate of drug increased as a result of decreasing effects of polymer contents in matrices. The significantly sustained release of drug from polymer-coated alginate beads occurred as the amount of polymer increased because the thickness of coated membrane increased so that cracks and pores of the outer surface of alginate beads could be reduced. The sustained and retarded action of polymer-reinforced and coated beads may result from the disturbance of swelling and erosion (disintegration) of alginate beads. From these findings, polymeric-rein-forcement and coatings of alginate gel beads can provide an advanced delivery system by retarding the release rate of various drugs.     

Nasal administration of metoclopramide from different dosage forms: in vitro,ex vivo,and in vivo evaluation

Nasal drug delivery is an interesting route of administration for metoclopramide hydrochloride (MTC) in preventing different kind of emesis. Currently, the routes of administration of antiemetics are oral or intravenous, although patient compliance is often impaired by the difficulties associated with acute emesis or invasiveness of parenteral administration. In this perspective, nasal dosage forms (solution, gel, and lyophilized powder) of MTC were prepared by using a mucoadhesive polymer sodium carboxymethylcellulose (NaCMC). In vitro and ex vivo drug release studies were performed in a modified horizontal diffusion chamber with cellulose membrane and excised cattle nasal mucosa as diffusion barriers. The tolerance of nasal mucosa to the formulation and its components were investigated using light microscopy. In vivo studies were carried out for the optimized formulations in sheep and the pharmacokinetics parameters were compared with oral solution and IV dosage form. The release of MTC from solution and powder formulations was found to be higher than gel formulation (p?<?0.05). Histopathological examination did not detect any severe damage. Hydroxypropyl-β-cyclodextrin (HPβCD) used in powder formulations was found to be effective for enhancing the release and absorption of MTC. In contrast to in vitro and ex vivo experiments nasal bioavailability of gel is higher than those of solution and powder (p?<?0.05). In conclusion, the NaCMC gel formulation of MTC with mucoadhesive properties with increased permeation rate is promising for prolonging nasal residence time and thereby nasal absorption.     

The Controlled Release of Prednisolone Using Alginate Gel

In a release study of alginate gel beads, swelling and erosion of the beads were observed at pH 6.8, whereas no swelling occurred at pH 1.2. The amount of released prednisolone (PL) was greater at pH 6.8 than at pH 1.2. The lower the ratio of mannuronic acid block to guluronic acid block in alginate, the slower the release of PL. An increase in loaded PL in the beads resulted in a slower release of PL. The decrease in bead size caused a rapid release of PL. The addition of sodium alginate propylene glycol ester elevated the extent of PL release. The plasma profile of PL showed sustained-release behavior after the oral administration of the beads to beagles. Furthermore, the correlation between in vitro release and in vivo absorption of PL for various alginate gel beads was evaluated using deconvolution and convolution methods. The in vivo absorption of PL was correlated with the PL release at pH 1.2, and it differed from that at pH 6.8. The release of PL from alginate gel beads in vivo appeared to occur under conditions that cause little swelling.     

Use of floating alginate gel beads for stomach-specific drug delivery.

Two types of alginate gel beads capable of floating in the gastric cavity were prepared. The first, alginate gel bead containing vegetable oil (ALGO), is a hydrogel bead and its buoyancy is attributable to vegetable oil held in the alginate gel matrix. The model drug, metronidazole (MZ), contained in ALGO was released gradually into artificial gastric juice, the release rate being inversely related to the percentage of oil. The second, alginate gel bead containing chitosan (ALCS), is a dried gel bead with dispersed chitosan in the matrix. The drug-release profile was not affected by the kind of chitosan contained in ALCS. When ALCS containing MZ was administered orally to guinea pigs, it floated on the gastric juice and released the drug into the stomach. Furthermore, the concentration of MZ at the gastric mucosa after administration of ALCS was higher than that in the solution, though the MZ serum concentration was the same regardless of which type of gel was administered. These release properties of alginate gels are applicable not only for sustained release of drugs but also for targeting the gastric mucosa.     

Molecular and biopharmaceutical investigation of alginate–inulin synbiotic coencapsulation of probiotic to target the colon

Colon targeting, as a site-specific delivery for oral formulation, remains a major challenge, especially for sensitive bioactive components such as therapeutic forms of phages, live attenuated virus and prebiotics–probiotics association. Synbiotics could be used to protect encapsulated probiotics during the gastrointestinal tract and control their release in the colon. To achieve these goals, effective prebiotics, such as inulin, could be combined with alginate – the most exploited polymer used for probiotic encapsulation – in the form of beads. This work aimed to study the biopharmaceutical behaviour of alginate beads (A) and inulin–alginate beads of different inulin concentrations (5 or 20%) in 2% alginate (AI5, AI20). Beads were loaded with three probiotic strains (Pediococcus acidilactici Ul5, Lactobacillus reuteri and Lactobacillus salivarius). Dissolution of beads was studied by USP4 under conditions simulating the gastrointestinal condition. The survival rates of the bacterial strains were measured by a specific qPCR bacterial count. Mucoadhesiveness of beads was studied by an ex vivo method using intestinal mucosa. To understand the behaviour of each formulation, the ultrastructure of the polymeric network was studied using scanning electron microscopy (SEM). Molecular interactions between alginate and inulin were studied by Fourier transform infra-red spectroscopy (FTIR). Dissolution results suggested that the presence of inulin in beads provided more protection for the tested bacterial strains against the acidic pH. AI5 was the most effective formulation to deliver probiotics to the colon simulation conditions. FTIR and SEM investigations explained the differences in behaviour of each formula. The developed symbiotic form provided a promising matrix for the development of colonic controlled release systems.     

Literature Alerts

In an attempt to fabricate floating beads of ciprofloxacin, drugloaded alginate beads were prepared by simultaneous external and internal gelation. The effect of blending of alginate with gellan, hydroxypropyl methylcellulose, starch, and chitosan on the bead properties were evaluated. Beads were spherical with incorporation efficiency in the range of 52.81 ± 2.64 to 78.95 ± 1.92%. Beads exhibited buoyancy over a period of 7–24 hr based on the formulation variables. In vitro release of ciprofloxacin from the alginate beads in simulated gastric fluid (SGF) (0.1 N HCl, pH 1.2), was influenced significantly (p < 0.001) by the properties and concentration of additives. Among the polymers incorporated into alginate beads. Hydroxy propyl methylcellulose (HPMC) provided an extended release over 7 hr. The drug release predominately followed Higuchi's square root model.     

载葛根素的海藻酸镁胃内滞留释药系统的研究

采用滴制法制备微丸\选取海藻酸钠为载体材料,氯化镁为交联剂,碳酸氢钠为制泡剂,海藻酸钠与镁离子发生交联反应制得胃漂浮微丸,考察微丸的外观、粒径、微观结构、漂浮性以及释药行为.为延长药物在胃靶向释放时长,在单因素实验的基础上,以Eudragit L100和Eudragit RSALO作为载体材料制备载药固体分散体,粉碎过...     

New amphiphilic and pH-sensitive hydrogel for controlled release of a model poorly water-soluble drug

This paper presents the development of new pH-sensitive, amphiphilic and biocompatible hydrogels based on alginate-g-PCL, cross-linked with calcium ions to form beads, prepared for controlled delivery of poorly water-soluble drug. We have focused our study on the effect of the length of PCL chains (530 and 1250 g mol⁻¹). Swelling profiles obtained clearly indicated that these hydrogels swell slightly (10-14%) in a simulated gastric fluid (pH 1.2), and strongly (700-1300% before disintegration) in a simulated intestinal fluid (pH 6.8). In both media, rates of swelling were lower for beads based on amphiphilic derivatives than for alginate/Ca²⁺ ones due to the hydrophobic PCL grafts, and decreased when hydrophobic character increased. A model drug, theophylline, was entrapped into these hydrogels and release studies were carried out. The drug was protected in acidic fluid (only 14-20% of release for alginate-g-PCL hydrogel against 35% of release for alginate hydrogel during 350 min). The drug is released completely in neutral fluid due to ion exchanges and disintegration of the hydrogel. PCL leads to decrease in the release kinetics in SIF (2 h for alginate-g-PCL/Ca²⁺ beads against 1 h for alginate/Ca²⁺ beads). It was demonstrated that the establishment of clusters inside beads by intramolecular interactions between PCL grafts of 530 g mol⁻¹ in salt media allowed to retain the drug and to slow down its release considerably.     

The use of citric acid to prolong the in vivo gastro-retention of a floating dosage form in the fasted state

Gastro-retentive dosage forms have the potential to improve local therapy and decrease the variation in bioavailability that is observed with a number of commercially available immediate and modified release preparations. In this study, a dosage form has been developed, utilising freeze-dried calcium alginate beads, designed to float on the surface of the stomach contents thus prolonging the retention time. The aim of the study was to also assess the in vivo behaviour of the radio-labelled calcium alginate beads when they were administered under fasting conditions with either water or an aqueous solution of citric acid, a potential gut transit delaying substance. The study was performed in healthy male volunteers who swallowed the radio-labelled calcium alginate beads after a 10h overnight fast. Gamma scintigraphy was selected as the method to monitor the movement of the calcium alginate beads. The volunteers consumed no further food or drink until gastric emptying of the calcium alginate beads was complete. The results indicated that prolonged gastric retention was achieved when the dosage form was administered with the citric acid solution when compared to retention in the absence of citric acid. Citric acid, therefore, has the potential to delay the gastric emptying of the calcium alginate beads when administered to fasted volunteers.     

In vitro evaluation of chitosan coated- and uncoated-calcium alginate beads containing methyl salicylate-lactose physical mixture

Context: Methyl salicylate–lactose physical mixture (1:1 and 1:1.5 ratios) was incorporated into calcium alginate beads by a coacervation method involving an ionotropic gelation/polyelectrolyte complexation approach.

Objectives: This study aims to determine the influence of chitosan coating over the beads on drug entrapment efficiency (DEE) and release characteristics in artificial saliva compared to that of the uncoated beads.

Results and discussion: Changes in formulation parameters (gelation time, concentrations of Ca²⁺ and alginate) resulted in decrease in DEE of chitosan-uncoated beads (p?<?0.05). This is due to the combined effects of drug leach-out from the physical mixture by Ca²⁺ ions, alginate gel matrix cross-linking and free drug diffusion from chitosan-uncoated beads. However, an increment in the DEE was seen for chitosan-coated beads. A rapid drug release profile was noted for uncoated beads, but for chitosan-coated beads a sustained release profile was depicted depending upon the coating conditions. Chitosan-coated beads had reduced swelling and erosion properties and thus behaved as a physical barrier to drug release. Shifting from anomalous transport type to Fickian transport confirmed the formation of physical barrier onto chitosan-coated beads.

Conclusion: Calcium alginate beads could be used as a controlled-release system for methyl salicylate–lactose physical mixture.     

Adipic acid dihydrazide treated partially oxidized alginate beads for sustained oral delivery of flurbiprofen

In this study, periodate oxidation of sodium alginate was controlled such that the oxidized alginate could form isolatable beads with Ca⁺² ions. The beads of oxidized alginate having a degree of oxidation 1 mol%, entrapped 89% flurbiprofen and released almost all of its content within 1.5 h in pH 7.2 phosphate buffer solution. The beads were covalently crosslinked with adipic dihydrazide (ADH) in addition to ionic crosslinks and were characterized. Scanning electron microscopy revealed that the beads were spherical having smooth surfaces. The drug entrapment efficiency decreased (90–86%) with increasing concentration of ADH (2–6% w/v) in the gelation medium. However, the beads prolonged the drug release in alkaline dissolution medium up to 8 h depending upon the concentration of ADH. The beads prepared with 2% ADH swelled more rapidly and led to faster drug release in either pH 1.2 HCl solution or pH 7.2 phosphate buffer solution. The swelling tendencies were reduced and the drug release became slower with higher concentrations in either fluid. The drug diffusion from the beads followed super case II transport mechanism. FTIR spectroscopy indicated stable nature of flurbiprofen in the beads and therefore had potential as sustained oral delivery system for the drug.     

New amphiphilic and pH-sensitive hydrogel for controlled release of a model poorly water-soluble drug

This paper presents the development of new pH-sensitive, amphiphilic and biocompatible hydrogels based on alginate-g-PCL, cross-linked with calcium ions to form beads, prepared for controlled delivery of poorly water-soluble drug. We have focused our study on the effect of the length of PCL chains (530 and 1250 g mol⁻¹). Swelling profiles obtained clearly indicated that these hydrogels swell slightly (10–14%) in a simulated gastric fluid (pH 1.2), and strongly (700–1300% before disintegration) in a simulated intestinal fluid (pH 6.8). In both media, rates of swelling were lower for beads based on amphiphilic derivatives than for alginate/Ca²⁺ ones due to the hydrophobic PCL grafts, and decreased when hydrophobic character increased. A model drug, theophylline, was entrapped into these hydrogels and release studies were carried out. The drug was protected in acidic fluid (only 14–20% of release for alginate-g-PCL hydrogel against 35% of release for alginate hydrogel during 350 min). The drug is released completely in neutral fluid due to ion exchanges and disintegration of the hydrogel. PCL leads to decrease in the release kinetics in SIF (2 h for alginate-g-PCL/Ca²⁺ beads against 1 h for alginate/Ca²⁺ beads). It was demonstrated that the establishment of clusters inside beads by intramolecular interactions between PCL grafts of 530 g mol⁻¹ in salt media allowed to retain the drug and to slow down its release considerably.     

Amoxycillin release from a floating dosage form based on alginates

Floating alginate beads have been prepared from alginate solutions containing either dissolved or suspended amoxycillin. The beads were produced by the dropwise addition of the alginate into calcium chloride solution, followed by removal of the gel beads and freeze drying. Drug release studies showed that beads prepared with the drug in solution provided some sustained release characteristics and that these could be improved by the addition of amylose. In all cases, the drug release was consistent with release of a dissolved solute from a granular or porous matrix. The beads retained their buoyancy when amylose and amoxycillin were incorporated, exhibiting resultant weight values greater than zero after 20 h. Preparation of the beads from alginate solutions containing the drug in suspension allowed higher drug loadings, at the expense of faster release and lower buoyancy.