Optimization of chitosan succinate and chitosan phthalate microspheres for oral delivery of insulin using response surface methodology

In the present study, a Box-Behnken experimental design was employed to statistically optimize the formulation parameters of chitosan phthalate and chitosan succinate microspheres preparation. These microspheres can be useful for oral insulin delivery system. The effects of three parameters namely polymer concentration, stirring speed and cross linking agent were studied. The fitted mathematical model allowed us to plot response surfaces curves and to determine optimal preparation conditions. Results clearly indicated that the crosslinking agent was the main factor influencing the insulin loading and releasing. The in vitro results indicated that chitosan succinate microspheres need high amount of crosslinking agent to control initial burst release compared to chitosan phthalate microspheres. The reason may be attributed that chitosan succinate is more hydrophilic than chitosan phthalate. The relative pharmacological efficacy for chitosan phthalate and chitosan succinate microspheres (18.66 +/- 3.84%, 16.24 +/- 4%) was almost three-fold higher than the efficacy of the oral insulin administration (4.68 +/- 1.52%). These findings suggest that these microspheres are promising carrier for oral insulin delivery system.     

Development and in-vivo evaluation of insulin-loaded chitosan phthalate microspheres for oral delivery

Novel chitosan phthalate microspheres containing insulin were prepared by emulsion cross-linking technique. The feasibility of these microspheres as oral insulin delivery carriers was evaluated. The pH-responsive release behaviour of insulin from microspheres was analysed. The ability of chitosan phthalate-insulin microspheres to enhance intestinal absorption and improve the relative pharmacological availability of insulin was investigated by monitoring the plasma glucose and insulin level of streptozotocin-induced diabetic rats after oral administration of microspheres at insulin dose of 20 IU kg(-1). In simulated gastric fluid (pH 2.0), insulin release from the microspheres was very slow. However, as the pH of the medium was changed to simulated intestinal fluid (pH 7.4), a rapid release of insulin occurred. The relative pharmacological efficacy for chitosan phthalate microspheres (18.66 +/- 3.84%) was almost four-fold higher than the efficacy of the chitosan phthalate-insulin solution administration (4.08 +/- 1.52%). Chitosan phthalate microspheres sustained the plasma glucose at pre-diabetic level for at least 16 h. These findings suggest that the microsphere is a promising carrier as oral insulin delivery system.     

Development and characterization of chitosan succinate microspheres for the improved oral bioavailability of insulin

The present study describes the fabrication of insulin loaded chitosan succinate microspheres to improve the efficacy of orally administered insulin. Chitosan succinate polymer was synthesized and its microspheres were prepared by emulsion phase separation technique. The microspheres were characterized by FT-IR spectroscopy, scanning electron microscopy, particle size, X-ray diffraction, and swelling index. Insulin was loaded into the microspheres by passive absorption technique. The ability of microspheres to protect insulin from gastric enzymatic degradation was investigated. Stability of insulin in the microspheres was determined by gel electrophoresis and circular dichroism (CD). In vitro release studies were performed under simulated gastric and intestinal pH conditions (pH 2.0 and pH 7.4). The pharmacokinetic parameters were monitored after oral administration of insulin loaded chitosan succinate microspheres, chitosan succinate-insulin solution, as well as after subcutaneous injection of insulin to diabetic rats. The degree of succinate substitution in the synthesized polymer was 16%. The prepared microspheres were spherical with an average diameter of 49 +/- 2 microm. The insulin-loading capacity was 62%. Chitosan succinate microspheres were found to protect the degradation of insulin from gastric enzymes. The encapsulated insulin was quickly released in simulated intestinal fluid (SIF, pH 7.4), whereas a small fraction of insulin was released in simulated gastric fluid (pH 2.0). The relative pharmacological efficacy for chitosan succinate microspheres (16 +/- 4%) was almost fourfold higher than the efficacy of the chitosan succinate-insulin solution administration (4 +/- 1.5%). The results suggest that chitosan succinate microspheres could be used as a potential carrier for oral insulin delivery.     

戊二醛一步固化法制备氟尿嘧啶壳聚糖微球

以壳聚糖为载体,戊二醛为交联剂,氟尿嘧啶为模型药物,采用一步固化法制备氟尿嘧啶壳聚糖微球制剂.以外观和包封率为指标优化了处方,并考察了交联剂浓度和交联时间对微球体外释放行为及溶胀度的影响.采用扫描电镜和红外光谱对微球结构进行表征.所得载药微球的载药量和包封率为33.5%、51.2%,平均粒径为(6.8±1.8)μm,30 min 时突释量为33.5%.     

Chitosan phthalate microspheres for oral delivery of insulin: preparation, characterization, and in vitro evaluation

Chitosan phthalate polymer was synthesized and its microspheres were prepared by emulsion phase separation technique. The characterization of microspheres was determined by means of FTIR spectroscopy, electron microscopy, particle size, and zeta potential. The insulin was loaded to the microspheres by passive absorption technique. The peptic and tryptic enzymes degradation of insulin in microspheres was investigated. The in vitro release behavior of the microspheres was investigated under different pH conditions (pH 2.0 and pH 7.4). The degree of phthalate substitution in the synthesized polymer was 20%. The prepared microspheres were spherical with an average diameter 46.34 μ m. The insulin-loading capacity was 62%. Chitosan phthalate microspheres protect the insulin from gastric enzymes degradation that may enhance the oral stability of insulin. The encapsulated insulin was quickly released in a phosphate buffer saline (pH 7.4), whereas a small amount of insulin was released under acidic condition (0.1N HCl; pH 2.0) because under acidic conditions, carboxylic groups present in the system exist in nonionized form and are poorly hydrophilic. However, in alkaline conditions, it exists in ionized form and is considerably hydrophilic. The results suggest that chitosan phthalate microspheres may be used as a potential carrier for oral insulin delivery.     

Chitosan Reduced Gold Nanoparticles as Novel Carriers for Transmucosal Delivery of Insulin

Purpose Colloidal metallic systems have been recently investigated in the area of nanomedicine. Gold nanoparticles have found themselves useful for diagnostic and drug delivery applications. Herein we have reported a novel method for synthesis of gold nanoparticles using a natural, biocompatible and biodegradable polymer; chitosan. Use of chitosan serves dual purpose by acting as a reducing agent in the synthesis of gold nanoparticles and also promotes the penetration and uptake of peptide hormone insulin across the mucosa. To demonstrate the use of chitosan reduced gold nanoparticles as carriers for drug delivery, we report herein the transmucosal delivery of insulin loaded gold nanoparticles. Materials and Methods Gold nanoparticles were prepared using different concentrations of chitosan (from 0.01% w/v up to 1% w/v). The gold nanoparticles were characterized for surface plasmon band, zeta potential, surface morphology, in vitro diffusion studies and fluorescence spectroscopy. The in vivo studies in diabetic male Wistar rats were carried out using insulin loaded chitosan reduced gold nanoparticles. Results Varying concentrations of chitosan used for the synthesis of gold nanoparticles demonstrated that the nanoparticles obtained at higher chitosan concentrations (>0.1% w/v) were stable showing no signs of aggregation. The nanoparticles also showed long term stability in terms of aggregation for about 6 months. Insulin loading of 53% was obtained and found to be stable after loading. Blood glucose lowering at the end of 2 h following administration of insulin loaded gold nanoparticles to diabetic rats was found to be 30.41 and 20.27% for oral (50 IU/kg) and nasal (10 IU/kg), respectively. Serum gold level studies have demonstrated significant improvement in the uptake of chitosan reduced gold nanoparticles. Conclusions The synthesis of gold nanoparticles using a biocompatible polymer, chitosan would improve its surface properties for binding of biomolecules. Our studies indicate that oral and nasal administration of insulin loaded chitosan reduced gold nanoparticles has led to improved pharmacodynamic activity. Thus, chitosan reduced gold nanoparticles loaded with insulin prove to be promising in controlling the postprandial hyperglycemia.     

Nasal delivery of insulin using chitosan microspheres

Nasal delivery of insulin is an alternative route for administration of this drug. The objective of this study was preparation of chitosan microspheres for insulin nasal delivery. After preparation of insulin chitosan microspheres by emulsification-cross linking process, the effect of chitosan quantity (200–400?mg), cross-linker type (ascorbic acid or ascorbyl palmitate) and amount (70–140?mg) were studied on the morphology, particle size, loading efficiency, flow and release of insulin from the microspheres by a factorial design. Optimized formulation was administered nasally in four groups of diabetic rats and their serum insulin levels were analysed by the insulin enzyme immunoassay kit and the serum glucose by the glucose oxidase kits. Insulin loading in microspheres was between 4.7–6.4% w/w, preparation efficiency more than 65% and mean particle size was 20–45?µm. In most cases, drug released followed a Higuchi model. Ascorbic acid caused an increase in stability, particle size and T_50% while decreased the loading efficiency and production efficiency. Increasing the chitosan content, increased particle size, flow and insulin release rate form the microspheres. The increase of cross-linking percentage decreased the flow and size of the microspheres while increase of cross-linking percentage promoted the stability and decreased DE₈% of insulin. Microspheres containing 400?mg of chitosan and 70?mg ascorbyl palmitate caused a 67% reduction of blood glucose compared to i.v. route and absolute bioavaliability of insulin was 44%. The results showed that chitosan microspheres of insulin are absorbable from nasal route.     

Nasal Delivery of Insulin Using Novel Chitosan Based Formulations: A Comparative Study in Two Animal Models Between Simple Chitosan Formulations and Chitosan Nanoparticles

Purpose. To investigate whether the widely accepted advantages associated with the use of chitosan as a nasal drug delivery system, might be further improved by application of chitosan formulated as nanoparticles. Methods. Insulin-chitosan nanoparticles were prepared by the ionotropic gelation of chitosan glutamate and tripolyphosphate pentasodium and by simple complexation of insulin and chitosan. The nasal absorption of insulin after administration in chitosan nanoparticle formulations and in chitosan solution and powder formulations was evaluated in anaesthetised rats and/or in conscious sheep. Results. Insulin-chitosan nanoparticle formulations produced a pharmacological response in the two animal models, although in both cases the response in terms of lowering the blood glucose levels was less (to 52.9 or 59.7% of basal level in the rat, 72.6% in the sheep) than that of the nasal insulin chitosan solution formulation (40.1% in the rat, 53.0% in the sheep). The insulin-chitosan solution formulation was found to be significantly more effective than the complex and nanoparticle formulations. The hypoglycaemic response of the rat to the administration of post-loaded insulin-chitosan nanoparticles and insulin-loaded chitosan nanoparticles was comparable. As shown in the sheep model, the most effective chitosan formulation for nasal insulin absorption was a chitosan powder delivery system with a bioavailability of 17.0% as compared to 1.3% and 3.6% for the chitosan nanoparticles and chitosan solution formulations, respectively. Conclusion. It was shown conclusively that chitosan nanoparticles did not improve the absorption enhancing effect of chitosan in solution or powder form and that chitosan powder was the most effective formulation for nasal delivery of insulin in the sheep model.     

Influence of magnesium stearate on the physicochemical and pharmacodynamic characteristics of insulin-loaded Eudragit entrapped mucoadhesive microspheres

Abstract

Effective oral insulin delivery has remained a challenge to the pharmaceutical industry. This study was designed to evaluate the effect of magnesium stearate on the properties of insulin-loaded Eudragit® RL 100 entrapped mucoadhesive microspheres. Microspheres containing Eudragit® RL 100, insulin, and varying concentrations of magnesium stearate (agglomeration-preventing agent) were prepared by emulsification-coacervation method and characterized with respect to differential scanning calorimetry (DSC), morphology, particle size, loading efficiency, mucoadhesive and micromeritics properties. The in vitro release of insulin from the microspheres was performed in simulated intestinal fluid (SIF, pH 7.2) while the in vivo hypoglycemic effect was investigated by monitoring the plasma glucose level of the alloxan-induced diabetic rats after oral administration. Stable, spherical, brownish, mucoadhesive, discrete and free flowing insulin-loaded microspheres were formed. While the average particle size and mucoadhesiveness of the microspheres increased with an increase in the proportion of magnesium stearate, loading efficiency generally decreased. After 12?h, microspheres prepared with Eudragit® RL 100: magnesium stearate ratios of 15:1, 15:2, 15:3 and 15:4 released 68.20?±?1.57, 79.40?±?1.52, 76.60?±?1.93 and 70.00?±?1.00 (%) of insulin, respectively. Reduction in the blood glucose level for the subcutaneously (sc) administered insulin was significantly (p?≤?0.05) higher than for most of the formulations. However, the blood glucose reduction effect produced by the orally administered insulin-loaded microspheres prepared with four parts of magnesium stearate and fifteen parts of Eudragit® RL 100 after 12?h was equal to that produced by subcutaneously administered insulin solution. The results of this study can suggest that this carrier system could be an alternative for the delivery of insulin.     

Liver-targeted delivery of insulin-loaded nanoparticles via enterohepatic circulation of bile acids

Liver is the primary acting site of insulin. In this study, we developed innovative nanoparticles for oral and liver-targeted delivery of insulin by using enterohepatic circulation of bile acids. The nanoparticles were produced from cholic acid and quaternary ammonium modified chitosan derivative and hydroxypropyl methylcellulose phthalate (HPMCP). The nanoparticles had a diameter of 239?nm, an insulin loading efficiency of 90.9%, and a loading capacity of 18.2%. Cell culture studies revealed that the cholic acid groups effectively enhanced the transport of the nanoparticles through Caco-2 cell monolayer and greatly increased the absorption of the nanoparticles in HepG-2 cells via bile acid transporter mechanism. Ex vivo fluorescence images of ileum section, gastrointestinal tract, and liver demonstrated that the HPMCP increased the mucoadhesion of the nanoparticles in ileum, and the cholic acid groups facilitated the absorptions of the nanoparticles in both ileum and liver by use of bile acid transporters via enterohepatic circulation of bile acids. The therapy for diabetic mice displayed that the oral nanoparticle group could maintain hypoglycemic effect for more than 24?h and its pharmacological availability was about 30% compared with the insulin injection group. For the first time, this study demonstrates that using enterohepatic circulation of bile acids is an effective strategy for oral delivery of insulin.     

Design and evaluation of a chitosan–aprotinin conjugate for the peroral delivery of therapeutic peptides and proteins susceptible to enzymatic degradation

One main barrier for the peroral administration of therapeutic peptides and proteins is the enzymatic barrier, that is mediated by luminally secreted and membrane bound proteolytic enzymes. It was the aim of the study to synthesise, characterise and evaluate a novel polymer–inhibitor conjugate in order to improve the bioavailability of orally-administered peptides and proteins. The trypsin/chymotrypsin inhibitor aprotinin was covalently bound to chitosan. The percentage of the inhibitor in the polymer–inhibitor conjugate (m/m) was determined to be between 1.11 ± 0.36 and 1.92 ± 0.05%. In vitro enzyme assays clearly demonstrated the potential of the novel conjugate to inhibit trypsin and chymotrypsin. Moreover, studies in rats were performed to evaluate the efficacy of the conjugate in vivo. Eight hours after oral administration of tablets containing insulin and the novel chitosan–aprotinin conjugate, the mean blood glucose level decreased to 84 ± 6%. In contrast, the mean blood glucose level in the control group increased to 121 ± 8% of the initial measured blood glucose level. In conclusion it was demonstrated that chitosan–aprotinin conjugate represents a novel and promising tool for the oral administration of therapeutic peptides and proteins susceptible to enzymatic degradation caused by trypsin and chymotrypsin.     

Hypoglycemic efficacy of chitosan-coated insulin liposomes after oral administration in mice

INTRODUCTION In the past two decades the potential usefulnessof liposomes as drug carriers for improving enteral ab-sorption of poorly absorbed drugs including peptidedrugs such as insulin has attracted considerable interest.These phospholipid vesicles are capable of encapsulat-ing both hydrophobic and hydrophilic drugs; they arebiodegradable and are not toxic in vivo. The drugsencapsulated in liposomes are sufficiently protectedfrom enzymatic attack and immune recognition[1]. Li-po…     

Chitosan based pentazocine microspheres for intranasal systemic delivery: development and biopharmaceutical evaluation

Bioadhesive chitosan microspheres (Ms) of pentazocine (Pz) for intranasal systemic delivery were prepared with the aim of avoiding the first pass effect, and thus improving the bioavailability and achieving sustained and controlled blood level profiles, as an alternative therapy to injection and to obtain improved therapeutic efficacy in the treatment of chronic pain such as cancer, trauma and post-operative pain, etc. The formulation variables were drug loading, polymer concentration, stirring rate during crosslinking and oils. The microspheres (Ms) were subjected to evaluation for physical characteristics, such as particle size, incorporation efficiency, swelling ability, in vitro bioadhesion, in vitro drug release characteristics and in vivo performance in rabbits. Application of in vitro data to various kinetic equations indicated matrix diffusion controlled drug delivery from chitosan Ms. Drug loading, polymer concentration and stirring speed influenced the drug release profiles significantly while oils had negligible effect. In vivo studies indicated significantly improved bioavailability of Pz from Ms with sustained and controlled blood level profiles as compared to i.v., oral and nasal administration of drug solution. Good correlation was observed between in vitro and in vivo data.     

壳聚糖微球制备方法研究

综述近年来国内外壳聚糖微球制备方法的研究进展,其中主要介绍交联法、凝聚法、乳化-溶剂蒸发法、壳聚糖溶液包衣法、壳聚糖微球乙酰化法、喷雾干燥法等。     

Insulin delivery through nasal route using thiolated microspheres

Abstract

The aim of the present study was to investigate the potential of developed thiolated microspheres for insulin delivery through nasal route. In the present study, cysteine was immobilized on carbopol using EDAC. A total of 269.93?µmol free thiol groups per gram polymer were determined. The prepared nonthiolated and thiolated microspheres were studied for particle shape, size, drug content, swellability, mucoadhesion and in vitro insulin release. The thiolated microspheres exhibited higher mucoadhesion due to formation of covalent bonds via disulfide bridges with the mucus gel layer. Drug permeation through goat nasal mucosa of nonthiolated and thiolated microspheres were found as 52.62?±?2.4% and 78.85?±?3.1% in 6?h, respectively. Thiolated microspheres bearing insulin showed better reduction in blood glucose level (BGL) in comparison to nonthiolated microspheres as 31.23?±?2.12% and 75.25?±?0.93% blood glucose of initial BGL were observed at 6?h after nasal delivery of thiolated and nonthiolated microspheres in streptozotocin-induced diabetic rabbits.     

Development and in vitro evaluations of gelatin A microspheres of ketorolac tromethamine for intranasal administration

Gelatin A microspheres (MS) of ketorolac tromethamine (KT) for intranasal systemic delivery were developed with the aim to avoid gastro-intestinal complications, to improve patient compliance, to use as an alternative therapy to conventional dosage forms, to achieve controlled blood level profiles, and to obtain improved therapeutic efficacy in the treatment of postoperative pain and migraine. Gelatin A microspheres were prepared using the emulsification-crosslinking technique. The drug was dispersed in polymer gelatin and formulated into a w/o emulsion with liquid paraffin, using glutaraldehyde as a crosslinking agent. The formulation variables were drug loading and the concentrations of polymer (gelatin), co-polymer (chitosan) and the crosslinking agent. All the prepared microspheres were evaluated for physical characteristics, such as particle size, incorporation efficiency, swelling ability, in vitro bioadhesion on rabbit small intestine and in vitro drug release characteristics in pH 6.6 phosphate buffer. All the microspheres showed good bioadhesive properties. Gelatin A and chitosan concentrations, percentage of the crosslinking agent and also the drug loading affected significantly the rate and extent of drug release. The data indicated that the KT release followed Higuchi's matrix model.     

Delivery of LMW Heparin via Surface Coated Chitosan/peg-Alginate Microspheres Prevents Thrombosis

Heparin remains the gold-standard inhibitor of the process involved in the vascular response to injury. Continued anticoagulation is achieved by subcutaneous administration of low-molecular-weight heparin (LMW Hep) or with an orally active anticoagulant such as warfarin. An oral heparin would avoid the inconvenience of subcutaneous injections and adverse events associated with warfarin. A mild chitosan/PEG/calcium alginate microencapsulation process, as applied to encapsulation of biological macromolecules such as heparin and LMW Hep was investigated. Heparin and LMW Hep entrapped alginate beads were further surface/enteric coated with chitosan and cellulose acetate phthalate (CAP) via carbodiimide (EDC) functionalities. It was observed that approximately 70% of the content is being released into Tris-HCl buffer, pH 7.4 within the initial 6 hours and no significant release of LMW Hep was observed from enteric coated microspheres (12%) during treatment with 0.1 M HCl, pH 1.0 for 4 hours. But acid treated capsules had released almost all the entrapped LMW Hep into Tris-HCl, pH 7.4 media within 6 hours. From scanning electron microscopic and swelling studies, it appeared that the surface coatings (via chitosan and CAP) had modified the alginate microspheres and subsequently the drug release. The released heparin and LMW Hep had shown their anticoagulant functions. These results established the feasibility of modifying the formulation in order to obtain the desired controlled release of bioactive agent (LMW Hep), for a convenient pH dependent delivery system.     

应用人工神经网络—遗传算法优化多西紫杉醇微球制备工艺参数

目的优化多西紫杉醇壳聚糖微球的制备工艺参数。方法应用人工神经网络对微球制备工艺参数与考察指标之间的关系进行模型拟合,并结合遗传算法优化微球的制备工艺参数。结果模型参数优化结果为:壳聚糖浓度3.730 8%、乳化剂用量0.500 4 g、油水体积比1.843 3、药载比25.027 7、交联剂用量2.246 5 mL、搅拌乳化时间63.419 1 min、搅拌速率611.922 8 r.min1。考察指标预测结果是:微球的载药量43.653 8%、粒径8.168 5μm、跨距0.594 0。验证实验数据与网络模型优化结果基本吻合。结论应用人工神经网络建模结合遗传法寻优,可以实现多西紫杉醇壳聚糖微球制备工艺参数的优化。     

Nasal delivery of insulin using chitosan microspheres

Nasal delivery of insulin is an alternative route for administration of this drug. The objective of this study was preparation of chitosan microspheres for insulin nasal delivery. After preparation of insulin chitosan microspheres by emulsification-cross linking process, the effect of chitosan quantity (200-400mg), cross-linker type (ascorbic acid or ascorbyl palmitate) and amount (70-140 mg) were studied on the morphology, particle size, loading efficiency, flow and release of insulin from the microspheres by a factorial design. Optimized formulation was administered nasally in four groups of diabetic rats and their serum insulin levels were analysed by the insulin enzyme immunoassay kit and the serum glucose by the glucose oxidase kits. Insulin loading in microspheres was between 4.7-6.4% w/w, preparation efficiency more than 65% and mean particle size was 20-45 microm. In most cases, drug released followed a Higuchi model. Ascorbic acid caused an increase in stability, particle size and T50%, while decreased the loading efficiency and production efficiency. Increasing the chitosan content, increased particle size, flow and insulin release rate form the microspheres. The increase of cross-linking percentage decreased the flow and size of the microspheres while increase of cross-linking percentage promoted the stability and decreased DE8% of insulin. Microspheres containing 400mg of chitosan and 70mg ascorbyl palmitate caused a 67% reduction of blood glucose compared to i.v. route and absolute bioavaliability of insulin was 44%. The results showed that chitosan microspheres of insulin are absorbable from nasal route.     

肺靶向多西紫杉醇壳聚糖微球的制备与工艺优化

目的：研制肺靶向多西紫杉醇壳聚糖微球,并对处方工艺进行筛选。方法：以壳聚糖为载体,采用乳化-化学交联法制备多西紫杉醇壳聚糖微球。在单因素考察的基础上,利用正交试验设计优化微球制备工艺,采用HPLC法测定微球的载药量与包封产率。结果：制得的微球显微观察形态圆整、表面光滑,无粘连;平均粒径为（8．63±0．27）μm,粒径7—12μm的微球平均占总数的83．5％,载药量为（25．01±1．80）％,包封产率为（85．54±2．21）％。结论：筛选的最佳处方工艺制备的微球粒径大小适宜,可满足肺靶向微球的要求;该制剂有可能成为临床肺部肿瘤治疗的一种靶向制剂。