Physical stability of solid dispersions of the antiviral agent UC-781 with PEG 6000, Gelucire 44/14 and PVP K30

This paper describes the physical stability of solid dispersions of UC-781 with PEG 6000, Gelucire 44/14 and PVP K30 prepared by the solvent and melting methods. The concentration of the drug in the solid dispersions ranged from 5 to 80% w/w. The solid dispersions were stored at 4-8 and 25 degrees C (25% RH), then their physicochemical properties were analysed by differential scanning calorimetry (DSC), X-ray powder diffraction and dissolution studies as a function of storage time. The DSC curves of solid dispersions of UC-781 with PVP K30 did not show any melting peaks corresponding to UC-781 after storage, indicating no recrystallization of the drug. The DSC data obtained from PEG 6000 and Gelucire 44/14 showed some variations in melting peak temperatures and enthalpy of fusion of the carriers. It was shown that the enthalpy of fusion of PEG 6000 in the dispersions increased after storage; it was more pronounced for samples stored at 25 degrees C compared to those at 4-8 degrees C indicating the reorganization of the crystalline domains of the polymer. Similarly, the enthalpy of fusion of Gelucire 44/14 in the solid dispersions increased as a function of time. Dissolution of UC-781 from all solid dispersions decreased as a function of storage time. While these observations concurred with the DSC data for all solid dispersions, they were not reflected by X-ray powder diffraction data. It was concluded that it is the change of the physical state of the carriers and not that of the drug, which is responsible for the decreased dissolution properties of the solid dispersions investigated.     

Solid dispersion adsorbates for enhancement of dissolution rates of drugs

Amalgamation of solid dispersion and melt adsorption technologies was utilized for enhancing the dissolution rate of poorly soluble drugs. Glibenclamide was employed as a model drug. PEG6000 and Gelucire44/14 were used as hydrophilic carriers for the preparation of solid dispersions, and lactose was utilized as an adsorbent for the preparation of solid dispersion adsorbates. A high dissolution rate of solid dispersion adsorbates was observed when compared to solid dispersions alone and one of the marketed products.     

Physicochemical characterization of solid dispersions of carbamazepine formulated by supercritical carbon dioxide and conventional solvent evaporation method

Solid dispersions of carbamazepine (CBZ) were formulated by supercritical fluid processing (SCP) and conventional solvent evaporation in polyethylene glycol (PEG) 8000 with either Gelucire 44/14 or vitamin E TPGS NF (d-alpha-tocopheryl PEG 1000 succinate). Formulations were evaluated by dissolution, scanning electron microscopy, powder X-ray diffraction, and differential scanning calorimetry, and excipient cytotoxicity in Caco-2 cells by MTS [3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium, inner salt] assay. CBZ release was enhanced from supercritical fluid-treated CBZ and the CBZ/PEG 8000 (1:5), CBZ/PEG 8000/TPGS or Gelucire 44/14 (1:4:1) solid dispersions. The radically altered morphologies of SCP samples seen by scanning electron microscopy suggested polymorphic change that was confirmed by the X-ray diffraction and differential scanning calorimetry. Disappearance of the characteristic CBZ melting peak indicated that CBZ was dissolved inside the carrier system. Polymorphic change of CBZ during SCP led to faster dissolution. Therefore, SCP provides advantages over solid dispersions prepared by conventional processes.     

Solid state properties of pure UC-781 and solid dispersions with polyvinylpyrrolidone (PVP K30)

The purpose of this study was to elucidate the physical structure of solid dispersions of the antiviral agent UC-781 (N-[4-chloro-3-(3-methyl-2-butenyloxy)phenyl]-2-methyl-3-furancarbothioamide) with polyvinylpyrrolidone (PVP K30). Solid dispersions were prepared by coevaporating UC-781 with PVP K30 from dichloromethane. The physicochemical properties of the dispersions were evaluated in comparison with the physical mixtures by differential scanning calorimetry (DSC), X-ray powder diffraction, and FT-IR spectroscopy. We investigated the single crystal structure of pure UC-781. The data from single crystal analysis showed that UC-781 crystallized with orthorhombic symmetry in the space group Pcab. Its cell parameters were found to be; a = 8.1556(7) A,b = 17.658(2) A and c = 23.609(2) A; the unit cell was made up of eight molecules of UC-781. The molecules formed intermolecular hydrogen bonds between NH and thio groups, and were packed in a herringbone-like structure. The data from X-ray powder diffraction showed that crystalline UC-781 was changed into the amorphous state by co-evaporating it with PVP K30. From differential scanning calorimetry analysis, UC-781 peaks were observed in the DSC curves of all physical mixtures, while no peaks corresponding to the drug could be observed in the solid dispersions with the same drug composition up to the concentration of 50% w/w. The data from FT-IR spectroscopy showed the distortions and disappearance of some bands from the drug, while other bands were too broad or significantly less intense compared with the physical mixtures of the crystalline drug in PVP K30. Furthermore, the results from IR spectroscopy demonstrated that UC-781 interacted with PVP K30 in solid dispersions through intermolecular H-bonding.     

Improvement of dissolution rate of tacrolimus by solid dispersion technique

Tacrolimus has a poor solubility in water ranging from 4 to 12 μg mL^?1. The mean bioavailability is ~21 %.The present study was carried out with a view to enhance the dissolution rate of poorly water-soluble drug tacrolimus using Gelucire 44/14^® and Gelucire 50/13^® as carriers and lactose monohydrate as an adsorbent. A combination of melt and adsorption techniques was employed for the preparation of solid dispersions (SD) to make final product easy for handling. Phase solubility study was conducted to evaluate the effect of carriers on aqueous solubility of tacrolimus. In order to elucidate the mechanism of dissolution enhancement, solid state characteristics were investigated using Fourier transform infrared spectroscopy, differential scanning calorimetry and powder X-ray diffraction. Mathematical modeling of in vitro dissolution data indicated the best fitting with Korsemeyer–Peppas model and the drug release kinetics primarily as Fickian/anomalous diffusion. All prepared solid dispersions showed dissolution improvement compared to pure drug, with Gelucire 50/13^® as the superior carrier over Gelucire 44/14^®. Almost similar dissolution profile was obtained as a function of storage time; this can be explained by no change in XRD and DSC pattern after 45 days storage period.     

Mechanism of increased dissolution of diazepam and temazepam from polyethylene glycol 6000 solid dispersions

Solid dispersion literature, describing the mechanism of dissolution of drug-polyethylene glycol dispersions, still shows some gaps; (A). only few studies include experiments evaluating solid solution formation and the particle size of the drug in the dispersion particles, two factors that can have a profound effect on the dissolution. (B). Solid dispersion preparation involves a recrystallisation process (which is known to be highly sensitive to the recrystallisation conditions) of polyethylene glycol and possibly also of the drug. Therefore, it is of extreme importance that all experiments are performed on dispersion aliquots, which can be believed to be physico-chemical identical. This is not always the case. (C). Polyethylene glycol 6000 (PEG6000) crystallises forming lamellae with chains either fully extended or folded once or twice depending on the crystallisation conditions. Recently, a high resolution differential scanning calorimetry (DSC)-method, capable of evaluating qualitatively and quantitatively the polymorphic behaviour of PEG6000, has been reported. Unraveling the relationship between the polymorphic behavior of PEG6000 in a solid dispersion and the dissolution characteristics of that dispersion, is a real gain to our knowledge of solid dispersions, since this has never been thoroughly investigated. The aim of the present study was to fill up the three above mentioned gaps in solid dispersion literature. Therefore, physical mixtures and solid dispersions were prepared and in order to unravel the relationship between their physico-chemical properties and dissolution characteristics, pure drugs (diazepam, temazepam), polymer (PEG6000), solid dispersions and physical mixtures were characterised by DSC, X-ray powder diffraction (Guinier and Bragg-Brentano method), FT-IR spectroscopy, dissolution and solubility experiments and the particle size of the drug in the dispersion particles was estimated using a newly developed method. Addition of PEG6000 improves the dissolution rate of both drugs. Mechanisms involved are solubilisation and improved wetting of the drug in the polyethylene glycol rich micro-environment formed at the surface of drug crystals after dissolution of the polymer. Formulation of solid dispersions did not further improve the dissolution rate compared with physical mixtures. X-ray spectra show that both drugs are in a highly crystalline state in the solid dispersions, while no significant changes in the lattice spacings of PEG6000 indicate the absence of solid solution formation. IR spectra show the absence of a hydrogen bonding interaction between the benzodiazepines and PEG6000. Furthermore, it was concluded that the reduction of the mean drug particle size by preparing solid dispersions with PEG6000 is limited and that the influence of the polymorphic behavior of PEG6000 (as observed by DSC) on the dissolution was negligible.     

Solid dispersion of carbamazepine in PVP K30 by conventional solvent evaporation and supercritical methods

This study compares the physicochemical properties of carbamazepine (CBZ) solid dispersions prepared by either a conventional solvent evaporation versus a supercritical fluid process. Solid dispersions of carbamazepine in polyvinylpyrrolidone (PVP) K30 with either Gelucire 44/14 or Vitamin E TPGS, NF (d-alpha-tocopheryl polyethylene glycol 1000 succinate) were prepared and characterized by intrinsic dissolution, differential scanning calorimetry, powder X-ray diffraction and Fourier transform infrared spectroscopy. CBZ/PVP K30 and CBZ/PVP K30/TPGS solid dispersions showed increased dissolution rate. The best intrinsic dissolution rate (IDR) was obtained for supercritically processed CBZ/PVP K30 that was four-fold higher than pure CBZ. Thermograms of various solid dispersions did not show the melting peak of CBZ, indicating that CBZ was in amorphous form inside the carrier system. This was further confirmed by X-ray diffraction studies. Infrared spectroscopic studies showed interaction between CBZ and PVP K30 in solid dispersions. The amorphous state of CBZ coupled with presence of interaction between drug and PVP K30 suggests fewer, if any, stability problems. Because the supercritical-based process produced solid dispersions with IDR better than conventional solid dispersions augmented with amphiphilic carriers, stability issues associated with lipid carriers do not apply, which, in turn, implies easier scale up under current Good Manufacturing Practice for this technique.     

Diclofenac salts, II. Solid dispersions in PEG6000 and Gelucire 50/13.

A number of systems were prepared at five compositions (5, 10, 20, 30 and 40% w/w) of diclofenac/N-(2-hydroxyethyl) pyrrolidine salt and acidic diclofenac in PEG6000 and Gelucire 50/13, as physical mixtures and as solid dispersions. Powder X-ray diffractograms for the systems examined show shifted and normal peaks, suggesting that the drug is present inside the samples in different physical states. Differential scanning calorimetry does not offer important information, since drug solubility into the carriers increases with temperature and thermograms show only the melting point peak of the carriers. Hot-stage microscopy examination explains that, in high concentration samples, the drug is present either dissolved into the carriers, or precipitated as microcrystals, or undissolved crystals of larger size. Gelucire 50/13 allows the formation of larger crystals than PEG, using both the chemical forms of the drug. The release percentage of the drug from PEG6000/acidic diclofenac reaches 50% after few minutes in the most favourable case and appears to be dependent on the composition of the samples: the more diclofenac is present as dissolved in the pre-treated samples, the higher is the release. The optimum composition was found in the range of 5-10% w/w.     

Intestinal absorption characteristics of the low solubility thiocarboxanilide UC-781

The aim of this study was to determine the intestinal absorption characteristics of the antiviral agent UC-781 and to optimize the experimental conditions of the in vitro system for low solubility compounds. The absorption potential of UC-781 was studied with the Caco-2 system and with the rat intestinal perfusion technique. The low solubility of UC-781 required the use of solubility/dissolution rate enhancing agents (e.g. VitE-TPGS, Gelucire 44/14). The creation of sink conditions in the receiver compartment of the Caco-2 system was a prerequisite to reliably study the transport of this poorly soluble compound. After inclusion of VitE-TPGS in the acceptor solution, UC-781 could be characterized as a class II drug of the Biopharmaceutical Classification System (low solubility, high permeation across membranes). A significant concentration-dependent decrease in transport of UC-781 was observed upon increasing the concentration of VitE-TPGS in the apical compartment. This observation contrasts to the absorption enhancing properties of VitE-TPGS, and can probably be attributed to a decrease in the concentration of free UC-781 when using higher concentrations of the solubility/dissolution rate enhancing agents. The use of Gelucire 44/14 as a solubilizing agent resulted in a batch-dependent degradation of UC-781. The inclusion of the solubility/dissolution rate-enhancing agent VitE-TPGS did not result in absorption enhancement in the intestinal perfusion technique.     

水飞蓟素-聚乙二醇6000固体分散体系的制备及其特征考察

目的制备水飞蓟素固体分散体，加快药物的溶出，并进行特征考察。方法以聚乙二醇6000(PEG6000)为材料，采用熔融法将难溶性药物水飞蓟素制成固体分散体，通过体外释药试验考察固体分散技术对水飞蓟素的增溶作用，并以X-射线粉末衍射、傅立叶变换红外光谱(FT-IR)考察水飞蓟素固体分散体的特性。结果与原药比较，固体分散体中药物的释放速率明显增大，PEG6000固体分散体系能显著加快水飞蓟素的溶出。X-射线粉末衍射分析表明，PEG6000及药物在固体分散体中的晶格点阵面间距离、衍射峰位移及其相对强度等均发生了规律性变化，FT-IR分析表明PEG6000与药物间无相互作用。结论PEG6000固体分散体系的对难溶性药物溶出和扩散的加快，与载体材料和药物的晶格参数的改变密切相关。     

Melt extrusion--an alternative method for enhancing the dissolution rate of 17beta-estradiol hemihydrate.

17Beta-estradiol hemihydrate (17beta-E2) is a poorly water-soluble drug. Physical methods for improving the solubility and dissolution rate, e.g. micronization, have certain inherent disadvantages. The method of choice in this study, melt extrusion, proved to overcome many of the shortcomings of conventional methods. Different compositions of excipients such as PEG 6000, PVP (Kollidon 30) or a vinylpyrrolidone-vinylacetate-copolymer (Kollidon VA64) were used as polymers and Sucroester WE15 or Gelucire 44/14 as additives during melt extrusion. The solid dispersions resulted in a significant increase in dissolution rate when compared to the pure drug or to the physical mixtures. For example, a 30-fold increase in dissolution rate was obtained for a formulation containing 10% 17beta-E2, 50% PVP and 40% Gelucire 44/14. The solid dispersions were then processed into tablets. The improvement in the dissolution behavior was also maintained with the tablets. The USP XXIII requirement for estradiol tablets reaching greater than 75% drug dissolved after 60 min was obtained in this investigation.     

In vitro-in vivo evaluation of supercritical processed solid dispersions: permeability and viability assessment in Caco-2 cells

In this study improvement in the bioavailability of carbamazepine (CBZ) prepared as solid dispersions by conventional solvent evaporation and supercritical fluid (SCF) processing methods was assessed, along with the elucidation of the mechanism of improved absorption. Solid dispersions of CBZ in polyethylene glycol (PEG) with either Gelucire 44/14 or vitamin E-TPGS (TPGS) were evaluated by intrinsic dissolution. Directional transport through Caco-2 cell monolayers was determined in the presence and absence of TPGS. Cell viability in presence of various concentrations of amphiphilic carriers was seen. In vivo oral bioavailability was determined in rats. The apparent intrinsic dissolution rates (IDR) of both conventional- and SCF-CBZ/PEG 8000/TPGS solid dispersions were increased by 13- and 10.6-fold, respectively, relative to neat CBZ. CBZ was not a substrate of P-glycoprotein. Higher CBZ permeability was seen in presence of 0.1% TPGS. Cell viability studies showed significant cytotoxicity only at or above 0.1% amphiphilic carrier. Supercritical treated formulation (without amphiphilic carrier) displayed oral bioavailability on par with those conventional solid dispersions augmented with amphiphilic carriers. An in vitro-in vivo correlation was seen between IDR and the AUC of the various CBZ solid dispersions. Bioavailability of CBZ was more a function of dissolution as opposed to membrane effects. Although bioavailability from SCF processed dispersions was better than conventionally processed counterparts (except for one formulation containing Gelucire 44/14), an interaction of processing method and inclusion of an amphiphilic carrier, rather by one factor alone contributed to optimal absorption, thus giving contradictory results for Gelucire 44/14 and TPGS formulations.     

Solubility of selected derivatives of 1,4-benzodiazepin-2-one in solid dispersions in PEG 6000

Pharmaceutical availability of diazepam, oxazepam and nitrazepam from solid dispersions of PEG 6000 have been studied in comparison with corresponding physical mixtures and pure benzodiazepines. Selected derivatives of 1,4-benzodiazepin-2-one are poorly water soluble drugs. The aim of this work was to report the properties of diazepam- and nitrazepam-PEG 6000 solid dispersions. Differential scanning calorimetry (DSC) and X-ray diffraction were used to characterize the solid dispersions. The effect of PEG 6000 on the dissolution of selected derivatives of 1,4-benzodiazepin-2-one was investigated. The dissolution of diazepam, oxazepam and nitrazepam from its solid dispersions increased in the presence of PEG 6000.     

Improvement of the dissolution kinetics of SR 33557 by means of solid dispersions containing PEG 6000

Solid dispersions of SR 33557 in preparations containing from 30 to 80% w/w polyethylene glycol 6000 (PEG 6000) were prepared by the fusion method. The solubility of the drug substance either alone or in solid dispersions was determined in pH 1.2 and 4.5 media (extraction fluid NFXII, without enzyme). A large increase in the solubility was noted from the 80% w/w PEG preparation. A wettability study performed by measuring the contact angle on tablets of either drug substance or PEG 6000, or solid dispersions, revealed a minimal contact angle for the 80% w/w PEG 6000 solid dispersion (eutectic composition of SR 33557/PEG 6000 phase diagram). Dissolution kinetic analysis performed at pH 1.2 on all solid dispersions, on the physical mixtures containing 70 and 80% w/w PEG 6000, and on SR 33557 alone, showed a maximum release rate (100%) for the solid dispersions containing 70 and 80% w/w PEG 6000. The dissolution rate of the physical mixtures was faster than that of the drug substance alone but remained, however, lower than that of the solid dispersions, at the same composition. It was also observed that the dissolution rate, at pH 1.2 and 4.5, of the 70% w/w PEG 6000 solid dispersion was practically pH independent, which was not the case for the drug substance alone. The latter solid dispersion showed a slowing down of the dissolution kinetics after 3 months storage at 50°C whereas no change in the dissolution rate was observed following storage for 12 months at 25°C.     

Free flowing solid dispersions of the anti-HIV drug UC 781 with Poloxamer 407 and a maximum amount of TPGS 1000: Investigating the relationship between physicochemical characteristics and dissolution behaviour

Solid dispersions and physical mixtures made up of the poorly water-soluble drug UC 781, a polymer and a surfactant were prepared to contribute to the understanding of the relationship between physicochemical characteristics and dissolution behaviour. In addition, to facilitate downstream processing while still favouring drug dissolution to a maximum extent, formulation conditions were investigated to obtain a free flowing powder which contains a maximum amount of surfactant. Poloxamer 407, a polyethylene-polypropylene glycol block copolymer, was selected as a suitable polymer based on UC 781 supersaturation results. d-Alpha-tocopheryl polyethyleneglycol succinate 1000 (TPGS 1000) was preferred as a surfactant since it increased UC 781 dissolution when formulated in a self-micro emulsifying drug delivery system (SMEDDS), as compared to TPGS 400, TPGS 4000 and TPGS 6000. Based on flow properties, a TPGS 1000/Poloxamer 407 ratio of 80/20 was used to prepare solid dispersions by spray drying. Pure drugs, physical mixtures and solid dispersions were characterized by differential scanning calorimetry and X-ray powder diffraction. Eutectic phase behaviour was obtained in which the relative distribution of the polyethylene glycol folding was dependent on UC 781 concentration. Drug release was markedly increased when formulated as a solid dispersion with Poloxamer 407 and TPGS 1000. Formulation of solid dispersions did however not further improve the drug dissolution rate compared to that of physical mixtures. Nonetheless, variability of dissolution results was considerably reduced upon solid dispersion formulation.     

The formulation of Halofantrine as either non-solubilizing PEG 6000 or solubilizing lipid based solid dispersions: physical stability and absolute bioavailability assessment

A non-solubilizing solid dispersion formulation (polyethylene glycol 6000) and two solubilizing solid dispersions (Vitamin E TPGS and a Gelucire 44/14/Vitamin E TPGS blend) containing the antimalarial, Halofantrine (Hf), were formulated for bioavailability assessment in fasted beagles to determine if the oral absorption of Hf can be enhanced by these delivery systems. Solid dispersions comprising varying proportions of drug to carrier were prepared by the fusion method. Whilst the non-solubilizing formulation was assessed according to its dispersion characteristics, the solubilizing solid dispersions were assessed by their ability to form microemulsions upon dispersion. Studies in fasted beagles showed that the solid dispersions afforded a five- to seven-fold improvement in absolute oral bioavailability when compared with the commercially available tablet formulation. The delivery of Hf in either a solubilizing or non-solubilizing solid dispersion did not result in significant differences in oral bioavailability. The physical stability of the solid dispersions was studied using differential scanning calorimetry and X-ray powder diffraction.     

Studies on dissolution enhancement and mathematical modeling of drug release of a poorly water-soluble drug using water-soluble carriers.

Role of various water-soluble carriers was studied for dissolution enhancement of a poorly soluble model drug, rofecoxib, using solid dispersion approach. Diverse carriers viz. polyethylene glycols (PEG 4000 and 6000), polyglycolized fatty acid ester (Gelucire 44/14), polyvinylpyrollidone K25 (PVP), poloxamers (Lutrol F127 and F68), polyols (mannitol, sorbitol), organic acid (citric acid) and hydrotropes (urea, nicotinamide) were investigated for the purpose. Phase-solubility studies revealed AL type of curves for each carrier, indicating linear increase in drug solubility with carrier concentration. The sign and magnitude of the thermodynamic parameter, Gibbs free energy of transfer, indicated spontaneity of solubilization process. All the solid dispersions showed dissolution improvement vis-à-vis pure drug to varying degrees, with citric acid, PVP and poloxamers as the most promising carriers. Mathematical modeling of in vitro dissolution data indicated the best fitting with Korsemeyer-Peppas model and the drug release kinetics primarily as Fickian diffusion. Solid state characterization of the drug-poloxamer binary system using XRD, FTIR, DSC and SEM techniques revealed distinct loss of drug crystallinity in the formulation, ostensibly accounting for enhancement in dissolution rate.     

Physical Stability of Solid Dispersions Containing Triamterene or Temazepam in Polyethylene Glycols

The effect of storage on the physical stability of solid dispersions of triamterene or temazepam in polyethylene glycols was studied using differential scanning calorimetry (DSC), particle-size analysis and dissolution methods. The enthalpies of fusion of the carriers, without included drug and previously fused and crystallized, increased on storage. Analysis of similarly treated solid dispersions, containing either 10% temazepam or 10% triamterene, showed that each drug influenced the morphology of the polyethylene glycol (PEG). The enthalpies and melting points of the solidus components of the dispersions' carriers were initially reduced after preparation, but on storage these increased. The particle sizes of the drugs dispersed in the PEGs increased on storage. The changes in dissolution after storage of triamterene or temazepam dispersions were smaller for dispersions in PEG 1500 than for dispersions in PEGs of higher molecular weight (PEG 2000, PEG 4000 or PEG 6000) in which the reduction in dissolution was particularly marked during the first month of storage. The rank order of changes in dissolution were PEG 1500 ? PEG 2000 < PEG 4000 ～ PEG 6000.     

Enhancement of solubility and permeability of Candesartan cilexetil by using different pharmaceutical interventions

The poor solubility and wettability of Candesartan cilexetil (CAN) leads to poor dissolution and hence, low bioavailability after oral administration. The aim of the present study was to improve the solubility and dissolution rate and hence the permeability of CAN by preparing solid dispersions/inclusion complexes. Solid dispersions were prepared using PEG 6000 [hydrophilic polymer] and Gelucire 50/13 [amphiphilic surfactant] by melt agglomeration (MA) and solvent evaporation (SE) methods in different drug-to-carrier ratios, while inclusion complexes were made with hydroxypropyl-β-cyclodextrin (HP-β-CD) [complexing agent] by grinding and spray drying method. Saturation solubility method was used to evaluate the effect of various carriers on aqueous solubility of CAN. Based on the saturation solubility data, two drug-carrier combinations, PEG 6000 (MA 1:5) and HP-β-CD (1:1 M grinding) were selected as optimized formulations. FTIR, DSC, and XRD studies indicated no interaction of the drug with the carriers and provided valuable insight on the possible reasons for enhanced solubility. Dissolution studies showed an increase in drug dissolution of about 22 fold over the pure drug for PEG 6000 (MA 1:5) and 12 fold for HP-β-CD (1:1 M grinding). Ex-vivo permeability studies revealed that the formulation having the greatest dissolution also had the best absorption through the chick ileum. Capsules containing solid dispersion/ complex exhibited better dissolution profile than the marketed product. Thus, the solid dispersion/inclusion complexation technique can be successfully used for enhancement of solubility and permeability of CAN.     

Formulation of immediate release pellets containing famotidine solid dispersions

Famotidine (FM) is a potent H2-receptor antagonist used for the treatment of peptic ulcer. It has a low and variable bioavailability which is attributed to its low water solubility. In this study, the dissolution of the drug was enhanced by a preparation of solid dispersion using two hydrophilic carriers, namely Gelucire 50/13 and Pluronic F-127. The prepared solid dispersions were characterized by differential scanning calorimetry (DSC), which indicated that there were no signs of interaction of the drug with the carriers used in the case of solid dispersions containing higher polymeric contents (1:3 and 1:5). FM solid dispersions in the matrices of Gelucire 50/13 and Pluronic F-127 (1:3) were used to prepare pellets. The scanning electron microscope (SEM) images of pellets showed that the pellets have spherical shape and their size depends on the carrier used. The dissolution of the drug from either solid dispersion or pellets was performed. The dissolution study depicted that, the presence of the drug in solid dispersion enhanced its dissolution in comparison with the drug itself. Also, the drug release from the manufactured pellets was found to be improved in the case of solid dispersions (drug:carrier 1:3). A complete drug release occurred after 30 min from pellets containing solid dispersions, while only about 30% of the loaded FM was released from pellets containing untreated drug after 2 h.