In situ crosslinkable hyaluronan hydrogels for tissue engineering

We describe the development of an injectable, cell-containing hydrogel that supports cell proliferation and growth to permit in vivo engineering of new tissues. Two thiolated hyaluronan (HA) derivatives were coupled to four alpha,beta-unsaturated ester and amide derivatives of poly(ethylene glycol) (PEG) 3400. The relative chemical reactivity with cysteine decreased in the order PEG-diacrylate (PEGDA)>PEG-dimethacrylate>PEG-diacrylamide>PEG-dimethacrylamide. The 3-thiopropanoyl hydrazide derivative (HA-DTPH) was more reactive than the 4-thiobutanoyl hydrazide, HA-DTBH. The crosslinking of HA-DTPH with PEGDA in a molar ratio of 2:1 occurred in approximately 9 min, suitable for an in situ crosslinking applications. The in vitro cytocompatibility and in vivo biocompatibility were evaluated using T31 human tracheal scar fibroblasts, which were suspended in medium in HA-DTPH prior to addition of the PEGDA solution. The majority of cells survived crosslinking and the cell density increased tenfold during the 4-week culture period in vitro. Cell-loaded hydrogels were also implanted subcutaneously in the flanks of nude mice, and after immunohistochemistry showed that the encapsulated cells retained the fibroblast phenotype and secreted extracellular matrix in vivo. These results confirm the potential utility of the HA-DTPH-PEGDA hydrogel as an in situ crosslinkable, injectable material for tissue engineering.     

Enzyme-catalyzed crosslinkable hydrogels: emerging strategies for tissue engineering

State-of-the-art bioactive hydrogels can easily and efficiently be formed by enzyme-catalyzed mild-crosslinking reactions in situ. Yet this cell-friendly and substrate-specific method remains under explored. Hydrogels prepared by using enzyme systems like tyrosinases, transferases and lysyl oxidases show interesting characteristics as dynamic scaffolds and as systems for controlled release. Increased attention is currently paid to hydrogels obtained via crosslinking of precursors by transferases or peroxidases as catalysts. Enzyme-mediated crosslinking has proven its efficiency and attention has now shifted to the development of enzymatically crosslinked hydrogels with higher degrees of complexity, mimicking extracellular matrices. Moreover, bottom-up approaches combining biocatalysts and self-assembly are being explored for the development of complex nano-scale architectures. In this review, the use of enzymatic crosslinking for the preparation of hydrogels as an innovative alternative to other crosslinking methods, such as the commonly used UV-mediated photo-crosslinking or physical crosslinking, will be discussed. Photo-initiator-based crosslinking may induce cytotoxicity in the formed gels, whereas physical crosslinking may lead to gels which do not have sufficient mechanical strength and stability. These limitations can be overcome using enzymes to form covalently crosslinked hydrogels. Herewith, we report the mechanisms involved and current applications, focusing on emerging strategies for tissue engineering and regenerative medicine.     

Injectable chitosan hyaluronic acid hydrogels for cartilage tissue engineering

Injectable cartilaginous constructs that can form gels in tissue defects have many advantages in tissue engineering applications. In this study we created an injectable hydrogel consisting of methacrylated glycol chitosan (MeGC) and hyaluronic acid (HA) by photocrosslinking with a riboflavin photoinitiator under visible light. A minimum irradiation time of 40 s was required to produce stable gels for cell encapsulation with 87–90% encapsulated chondrocyte viability. Although increasing the irradiation time from 40 to 600 s significantly enhanced the compressive modulus of the hydrogels up to 11 or 17 kPa for MeGC or MeGC/HA, respectively, these conditions reduced the encapsulated cell viability to 60–65%. The majority of chondrocytes encapsulated in MeGC hydrogels after 300 s irradiation maintained a rounded shape with a high cell viability of ～80–87% over a 21 day culture period. The incorporation of HA in MeGC hydrogels increased the proliferation and deposition of cartilaginous extracellular matrix by encapsulated chondrocytes. These findings demonstrate that MeGC/HA composite hydrogels have the potential for cartilage repair.     

Enhancing cell penetration and proliferation in chitosan hydrogels for tissue engineering applications

The aim of this study was to develop a process to create highly porous three-dimensional (3D) chitosan hydrogels suitable for tissue engineering applications. Chitosan was crosslinked by glutaraldehyde (0.5 vol %) under high pressure CO(2) at 60 bar and 4 °C for a period of 90 min. A gradient-depressurisation strategy was developed, which was efficient in increasing pore size and the overall porosity of resultant hydrogels. The average pore diameter increased two fold (59 μm) compared with the sample that was depressurised after complete crosslinking and hydrogel formation (32 μm). It was feasible to achieve a pore diameter of 140 μm and the porosity of hydrogels to 87% by addition of Acacia gum (AG) as a surfactant to the media. The enhancement in porosity resulted in an increased swelling ratio and decreased mechanical strength. On hydrogels with large pores (>90 μm) and high porosities (>85%), fibroblasts were able to penetrate up to 400 μm into the hydrogels with reasonable viabilities (~80%) upon static seeding. MTS assays showed that fibroblasts proliferated over 14 days. Furthermore, aligned microchannels were produced within porous hydrogels to further promote cell proliferation. The developed process can be easily used to generate homogenous pores of controlled sizes in 3D chitosan hydrogels and may be of use for a broad range of tissue engineering applications.     

Microengineered hydrogels for tissue engineering

Hydrogels have been extensively used in various biomedical applications such as drug delivery and biosensing. More recently the ability to engineer the size and shape of biologically relevant hydrogels has generated new opportunities in addressing challenges in tissue engineering such as vascularization, tissue architecture and cell seeding. Here, we discuss the use of microengineered hydrogels for tissue engineering applications. We will initially provide an overview of the various approaches that can be used to synthesize hydrogels with controlled features and will subsequently discuss the emerging applications of these hydrogels.     

Photopolymerizable hydrogels for tissue engineering applications

Photopolymerized hydrogels are being investigated for a number of tissue engineering applications because of the ability to form these materials in situ in a minimally invasive manner such as by injection. In addition, hydrogels, three-dimensional networks of hydrophilic polymers that are able to swell large amounts of water, can be made to resemble the physical characteristics of soft tissues. Hydrogel materials also generally exhibit high permeability and good biocompatibility making, these materials attractive for use in cell encapsulation and tissue engineering applications. A number of hydrogel materials can be formed via photopolymerization processes mild enough to be carried out in the presence of living cells. This allows one to homogeneously seed cells throughout the scaffold material and to form hydrogels in situ. This review presents advantages of photopolymerization of hydrogels and describes the photoinitiators and materials in current use. Applications of photopolymerized hydrogels in tissue engineering that have been investigated are summarized.     

Visible light-induced crosslinkable gelatin

A novel visible light-crosslinkable porcine gelatin was prepared for gelation and micropatterning. The preparation employed a photo-oxidation-induced crosslinking mechanism. First, furfuryl groups were incorporated into the gelatin. Second, the modified gelatin was mixed in water with Rose Bengal, which is a visible light sensitizer. Irradiation by visible light solidified the aqueous solution. In addition, when the solution was cast on a plate, dried and photo-irradiated in the presence of a photomask a micropattern was formed that matched the micropattern on the photomask. The gelatin-immobilized regions enhanced cell adhesion. It was also confirmed that the gelatin incorporating furfuryl and Rose Bengal have no significant toxicity. The photo-crosslinkable gelatin was employed as a direct pulp capping material in the dental field. Considering these results, this system could be useful as a new type of visible light-induced crosslinkable biosealant.     

Injectable chitosan-based hydrogels for cartilage tissue engineering

Water-soluble chitosan derivatives, chitosan-graft-glycolic acid (GA) and phloretic acid (PA) (CH-GA/PA), were designed to obtain biodegradable injectable chitosan hydrogels through enzymatic crosslinking with horseradish peroxidase (HRP) and H₂O₂. CH-GA/PA polymers were synthesized by first conjugating glycolic acid (GA) to native chitosan to render the polymer soluble at pH 7.4, and subsequent modification with phloretic acid (PA). The CH-GA43/PA10 with a degree of substitution (DS, defined as the number of substituted NH₂ groups per 100 glucopyranose rings of chitosan) of GA of 43 and DS of PA of 10 showed a good solubility at pH values up to 10. Short gelation times (e.g. 10 s at a polymer concentration of 3 wt%), as recorded by the vial tilting method, were observed for the CH-GA43/PA10 hydrogels using HRP and H₂O₂. It was shown that these hydrogels can be readily degraded by lysozyme. In vitro culturing of chondrocytes in CH-GA43/PA10 hydrogels revealed that after 2 weeks the cells were viable and retained their round shape. These features indicate that CH-GA/PA hydrogels are promising as an artificial extracellular matrix for cartilage tissue engineering.     

Bioresponsive phosphoester hydrogels for bone tissue engineering

Bioresponsive and intelligent biomaterials are a vehicle for manipulating cell function to promote tissue development and/or tissue engineering. A photopolymerized hydrogel based on a phosphoester- poly(ethylene glycol) polymer (PhosPEG) was synthesized for application to marrow-derived mesenchymal stem cell (MSC) encapsulation and tissue engineering of bone. The phosphor-containing hydrogels were hydrolytically degradable and the rate of degradation increased in the presence of a bone-derived enzyme, alkaline phosphatase. Gene expression and protein analysis of encapsulated MSCs demonstrated that PhosPEG-PEG cogels containing an intermediate concentration of phosphorus promoted the gene expression of bone-specific markers including type I collagen, alkaline phosphatase, and osteonectin, without the addition of growth factors or other biological agents, compared with pure poly(ethylene glycol)-based gels. Secretion of alkaline phosphatase, osteocalcin, and osteonectin protein was also increased in the PhosPEG cogels. Mineralization of gels increased in the presence of phosphorus in both cellular and acellular constructs compared with PEG gels. In summary, phosphate-PEG-derived hydrogels increase gene expression of bone-specific markers, secretion of bone-related matrix, and mineralization and may have a potential impact on bone-engineering therapies.     

Photo-patterning of porous hydrogels for tissue engineering

Since pore size and geometry strongly impact cell behavior and in vivo reaction, the ability to create scaffolds with a wide range of pore geometries that can be tailored to suit a particular cell type addresses a key need in tissue engineering. In this contribution, we describe a novel and simple technique to design porous, degradable poly(2-hydroxyethyl methacrylate) hydrogel scaffolds with well-defined architectures using a unique photolithography process and optimized polymer chemistry. A sphere-template was used to produce a highly uniform, monodisperse porous structure. To create a patterned and porous hydrogel scaffold, a photomask and initiating light were employed. Open, vertical channels ranging in size from 360+/-25 to 730+/-70 microm were patterned into approximately 700 microm thick hydrogels with pore diameters of 62+/-8 or 147+/-15 microm. Collagen type I was immobilized onto the scaffolds to facilitate cell adhesion. To assess the potential of these novel scaffolds for tissue engineering, a skeletal myoblast cell line (C2C12) was seeded onto scaffolds with 147 microm pores and 730 microm diameter channels, and analyzed by histology and digital volumetric imaging. Cell elongation, cell spreading and fibrillar formation were observed on these novel scaffolds. In summary, 3D architectures can be patterned into porous hydrogels in one step to create a wide range of tissue engineering scaffolds that may be tailored for specific applications.     

Development of chitosan/gelatin hydrogels incorporation of biphasic calcium phosphate nanoparticles for bone tissue engineering

Abstract

The chitosan/gelatin hydrogel incorporated with biphasic calcium phosphate nanoparticles (BCP-NPs) as scaffold (CGB) for bone tissue engineering was reported in this article. Such nanocomposite hydrogels were fabricated by using cycled freeze-thawing method, of which physicochemical and biological properties were regulated by adjusting the weight ratio of chitosan/gelatin/BCP-NPs. The needle-like BCP-NPs were dispersed into composites uniformly, and physically cross-linked with chitosan and gelatin, which were identified via Scanning Electron Microscope (SEM) images and Fourier Transform Infrared Spectroscopy (FT-IR) analysis. The porosity, equilibrium swelling ratio, and compressive strength of CGB scaffolds were mainly influenced by the BCP-NPs concentration. In vitro degradation analysis in simulated body fluids (SBF) displayed that CGB scaffolds were degraded up to at least 30?wt% in one month. Also, CCK-8 analysis confirmed that the prepared scaffolds had a good cytocompatibility through in culturing with bone marrow mesenchymal stem cells (BMSCs). Finally, In vivo animal experiments revealed that new bone tissue was observed inside the scaffolds, and gradually increased with increasing months, when implanted CGB scaffolds into large necrotic lesions of rabbit femoral head. The above results suggested that prepared CGB nanocomposites had the potential to be applied in bone tissue engineering.     

Strontium- and zinc-alginate hydrogels for bone tissue engineering

The development of bone replacement materials is an important healthcare objective due to the drawbacks of treating defects with bone autografts. In this work we propose a bone tissue engineering approach in which arginine-glycine-aspartic acid (RGD)-modified alginate hydrogels are crosslinked with bioactive strontium and zinc ions as well as calcium. Strontium was chosen for its ability to stimulate bone formation, and zinc is essential for alkaline phosphatase (ALP) activity. Calcium and strontium gels had similar stiffnesses but different stabilities over time. Strontium gels made with alginate with a high percentage of guluronic acid residues (high G) were slow to degrade, whereas those made with alginate rich in mannuronic acid (high M) degraded more quickly, and supported proliferation of Saos-2 osteoblast-like cells. After an initial burst, strontium release from alginate gels was steady and sustained, and the magnitude of release from high M gels was biologically relevant. Saos-2 cultured within alginate gels upregulated the osteoblast phenotypic marker genes RUNX2, collagen I (COL1A1) and bone sialoprotein (BSP), and ALP protein activity was highest in alginate gels cast with strontium ions. This strategy has the potential to be combined with other alginate-based systems for bone tissue engineering, or adapted to other tissue engineering applications.     

Porous chitosan scaffolds for tissue engineering.

The wide array of tissue engineering applications exacerbates the need for biodegradable materials with broad potential. Chitosan, the partially deacetylated derivative of chitin, may be one such material. In this study, we examined the use of chitosan for formation of porous scaffolds of controlled microstructure in several tissue-relevant geometries. Porous chitosan materials were prepared by controlled freezing and lyophilization of chitosan solutions and gels. The materials were characterized via light and scanning electron microscopy as well as tensile testing. The scaffolds formed included porous membranes, blocks, tubes and beads. Mean pore diameters could be controlled within the range 1-250 microm, by varying the freezing conditions. Freshly lyophilized chitosan scaffolds could be treated with glycosaminoglycans to form ionic complex materials which retained the original pore structure. Chitosan scaffolds could be rehydrated via an ethanol series to avoid the stiffening caused by rehydration in basic solutions. Hydrated porous chitosan membranes were at least twice as extensible as non-porous chitosan membranes, but their elastic moduli and tensile strengths were about tenfold lower than non-porous controls. The methods and structures described here provide a starting point for the design and fabrication of a family of polysaccharide based scaffold materials with potentially broad applicability.     

Injectable alginate hydrogels for cell delivery in tissue engineering

Alginate hydrogels are extremely versatile and adaptable biomaterials, with great potential for use in biomedical applications. Their extracellular matrix-like features have been key factors for their choice as vehicles for cell delivery strategies aimed at tissue regeneration. A variety of strategies to decorate them with biofunctional moieties and to modulate their biophysical properties have been developed recently, which further allow their tailoring to the desired application. Additionally, their potential use as injectable materials offers several advantages over preformed scaffold-based approaches, namely: easy incorporation of therapeutic agents, such as cells, under mild conditions; minimally invasive local delivery; and high contourability, which is essential for filling in irregular defects. Alginate hydrogels have already been explored as cell delivery systems to enhance regeneration in different tissues and organs. Here, the in vitro and in vivo potential of injectable alginate hydrogels to deliver cells in a targeted fashion is reviewed. In each example, the selected crosslinking approach, the cell type, the target tissue and the main findings of the study are highlighted.     

Cell encapsulation in biodegradable hydrogels for tissue engineering applications

Encapsulating cells in biodegradable hydrogels offers numerous attractive features for tissue engineering, including ease of handling, a highly hydrated tissue-like environment for cell and tissue growth, and the ability to form in vivo. Many properties important to the design of a hydrogel scaffold, such as swelling, mechanical properties, degradation, and diffusion, are closely linked to the crosslinked structure of the hydrogel, which is controlled through a variety of different processing conditions. Degradation may be tuned by incorporating hydrolytically or enzymatically labile segments into the hydrogel or by using natural biopolymers that are susceptible to enzymatic degradation. Because cells are present during the gelation process, the number of suitable chemistries and formulations are limited. In this review, we describe important considerations for designing biodegradable hydrogels for cell encapsulation and highlight recent advances in material design and their applications in tissue engineering.     

Highly stretchable HA/SA hydrogels for tissue engineering

A highly stretchable hyaluronic acid (HA)/sodium alginate (SA) hydrogel was developed in this study based on an interpenetrating polymer network. HA/SA hydrogels were prepared by mixing two polysaccharides followed by covalent crosslinking via epoxy groups on HA molecules and ionic crosslinking via divalent ions on SA chains sequentially. The effect of HA/SA ratio on the pore size and distribution, swelling ratio, elongation and rheological properties as well as protein loading and release properties of HA/SA hydrogels was explored. Moreover, a surface modification method, layer-by-layer (LBL) assembly technique, was applied to modify the hydrogel to evaluate the hydrogel’s tenability in varying biological performance. It was then shown that the hydrogels had the pore sizes ranging from 100 to 50 μm. With the increase in SA content of the resulting hydrogels, the pore size, swelling ratio, and storage modulus (G′) and loss modulus (G″) of the hydrogel all decreased, whereas the in vitro bulk weight loss was fastened. Moreover, elongation at break (EB) value increased first, reached a peak value and then decreased, that is HA8/SA1 (HA:SA = 8:1) had the highest EB value of 417%. This hydrogel could retain 33.2% of the pre-loaded protein even after 72 h, which could be further attenuated when LBL was used to shell the hydrogel. The growth of fibroblasts on HA8/SA1 hydrogel gave preliminary assessment on its suitability as a cellular carrier, while the LBL modified HA8/SA1 hydrogel also favored the anchoring of keratinocytes, further enhancing its cell carrier role for tissue regeneration, especially skin engineering.     

PEG-stabilized carbodiimide crosslinked collagen-chitosan hydrogels for corneal tissue engineering

Implantable biomaterials that mimic the extracellular matrix (ECM) in key physical and physiological functions require components and microarchitectures that are carefully designed to maintain the correct balance between biofunctional and physical properties. Our goal was to develop hybrid polymer networks (HPN) that combine the bioactive features of natural materials and physical characteristics of synthetic ones to achieve synergy between the desirable mechanical properties of some components with the biological compatibility and physiological relevance of others. In this study, we developed collagen-chitosan composite hydrogels as corneal implants stabilized by either a simple carbodiimide cross-linker or a hybrid cross-linking system comprised of a long-range bi-functional cross-linker (e.g. poly(ethylene glycol) dibutyraldehyde (PEG-DBA)), and short-range amide-type cross-linkers (e.g. 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC), and N-hydroxysuccinimide (NHS)). Optimum hybrid hydrogel demonstrated significantly enhanced mechanical strength and elasticity by 100 and 20%, respectively, compared to its non-hybrid counterpart. It demonstrated excellent optical properties, optimum mechanical properties and suturability, and good permeability to glucose and albumin. It had excellent biocompatibility and when implanted into pig corneas for 12 months, allowed seamless host-graft integration with successful regeneration of host corneal epithelium, stroma, and nerves.     

Polylysine-functionalised thermoresponsive chitosan hydrogel for neural tissue engineering

Foetal mouse cortical cells were cultured on 2D films and within 3D thermally responsive chitosan/glycerophosphate salt (GP) hydrogels. The biocompatibility of chitosan/GP 2D films was assessed in terms of cell number and neurites per cell. Osmolarity of the hydrogel was a critical factor in promoting cell survival with isotonic GP concentrations providing optimal conditions. To improve cell adhesion and neurite outgrowth, poly-D-lysine (PDL) was immobilised onto chitosan via azidoaniline photocoupling. Increase in PDL concentrations did not alter cell survival in 2D cultures but neurite outgrowth was significantly inhibited. Neurons exhibited a star-like morphology typical of 2D culture systems. The effects of PDL attachment on cell number, cell morphology and neurite outgrowth were more distinct in 3D culture conditions. Neurones exhibited larger cell bodies and sent out single neurites within the macroporous gel. Immobilised PDL improved cell survival up to an optimum concentration of 0.1%, however, further increases resulted in drops in cell number and neurite outgrowth. This was attributed to a higher cell interaction with PDL within a 3D hydrogel compared to the corresponding 2D surface. The results show that thermally responsive chitosan/GP hydrogels provide a suitable 3D scaffolding environment for neural tissue engineering.     

Porous polylactide/chitosan scaffolds for tissue engineering

Novel porous scaffolds were fabricated using biodegradable polylactide/chitosan blends. A combinational technique involving solvent-extracting, liquid-solid separation, and freeze-drying paths were employed. The processing parameters were optimized in order to produce desired porous scaffolds and thus obtained scaffolds showed well distributed and interconnected porous structures with controllable porosities varying from around 50-85% and regulative pore sizes being distributed within a region between 2 and 190 microm. These scaffolds exhibited remarkably improved hydrophilicity based on the measurements for their swelling index. The results obtained from in vitro incubation of scaffolds in phosphate buffered saline solutions at 37 degrees C during various periods up to 10 weeks indicated that chitosan component inside the scaffolds, on the one hand, effectively buffered the acidic degradation products of polylactide/chitosan scaffolds and on the other hand, the degradation of the scaffolds was also conspicuously delayed. These porous scaffolds maintained well-defined compressive mechanical properties and by well-blending polylactide with chitosan component, improved toughness on the resultant porous scaffolds was also observed.     

Protein-polymer conjugates for forming photopolymerizable biomimetic hydrogels for tissue engineering

Collagen, fibrin and albumin are popular proteins for making biological scaffolds for tissue engineering because of their biocompatibility, biodegradability, and availability. A major drawback of biological protein-based biomaterials is the limited control over their physical and biodegradation properties. Our laboratory has been developing new protein-based biomaterials with tunable properties without the use of cytotoxic protein cross-linking techniques. We describe the formation and assembly of photopolymerizable biomimetic hydrogel scaffolds made from protein-polymer conjugates of poly(ethylene glycol) (PEG) and collagen, fibrin or albumin. The conjugation of PEG to these proteins (PEGylation) was verified by SDS-PAGE and the polymerization reaction into a hydrogel network was confirmed by shear rheometry. The differences in rheology and swelling characteristics of the three hydrogel materials underscore the importance of the molecular relationship between the PEG and the protein constituent in this protein-polymer arrangement. The biofunctionality of the PEGylated collagen and fibrinogen hydrogels sustained both cell adhesion and proteolytic degradation that enabled 3-D cell spreading and migration within the hydrogel network. PEG-albumin hydrogels exhibited poor cell spreading and migration by virtue of the fact that the albumin backbone lacks any known cell adhesion sites. Despite differences in the biological and structural composition of the PEGylated fibrinogen and collagen hydrogels, the rate of cellular migration within each material was not significantly different.