Analysis and results of dissociation of the polyethylene liner in the Harris-Galante I acetabular component

The Harris-Galante I modular acetabular components (Zimmer, Warsaw, Ind) were most widely used in the 1980s in primary and revision total hip arthroplasty. We assessed 76 primary total hip arthroplasties performed using Harris-Galante I modular acetabular components. Dissociation of the polyethylene liner occurred in 5 patients and required revision surgery. None of the 76 hips had fractures of the metal locking tines on the metal shell. Liner dissociation was attributed to fatigue fracture of the polyethylene, a result of a gap between the liner and the metal shell. The thin polyethylene liner rim aggravated failure. The revision technique was to cement the polyethylene liner into the well-fixed Harris-Galante metal shell. The average follow-up observation period after revision surgery was 6.4 years; and there was no recurrence of dissociation, which supports the use of our revision technique.     

Cementing a liner into a stable cementless acetabular shell: the double-socket technique

BACKGROUND: During revision hip replacement surgery, the cementless acetabular shell is often well fixed but the locking mechanism may be ineffective. Cementing a new liner into the existing acetabular shell (the double-socket technique) can provide a simple solution. The purposes of the present study were to review our initial clinical results and to define the potential limitations of this technique. METHODS: Thirty-two hips with a preexisting well-fixed acetabular socket that had been in situ for an average of 8.6 years were treated with the insertion of a new polyethylene liner (seventeen hips) or a metal liner (fifteen hips) with use of cement. The indication for this technique was a deficient locking mechanism in twenty-two hips and the unavailability of a matching liner in ten hips. Anteroposterior radiographs of all hips were analyzed by a single independent reviewer. RESULTS: The mean duration of follow-up was 5.1 years. Six hips required a reoperation after a mean of 29.7 months; the reasons for the reoperations included aseptic failure of the acetabular construct (four hips), instability (one hip), and sepsis (one hip). The University of California at Los Angeles hip scores improved significantly (p < 0.001) compared with the preoperative values; specifically, the mean score improved from 6.2 to 9.1 for pain, from 6.3 to 8.3 for walking, from 6.2 to 7.8 for function, and from 4.7 to 5.8 for activity. The prevalence of dislocation was 22%. Kaplan-Meier analysis with revision as the end point revealed a five-year survival rate of 78% (95% confidence interval, 55% to 91%). CONCLUSIONS: The double-socket technique is a good alternative to acetabular socket removal for suitable candidates who have a well-fixed cementless socket with an inner diameter that is larger than the outer diameter of the cemented liner. This technique preserves acetabular bone stock and permits conversion to alternate bearing surfaces. We believe, however, that removal of a well-fixed acetabular shell or the use of a constrained liner should be strongly considered for patients with a history of hip instability.     

A constrained liner cemented into a secure cementless acetabular shell

BACKGROUND: Constrained acetabular components have been used to treat hips with recurrent instability following total hip arthroplasty and hips that demonstrate instability during revision surgery. In such hips, when a secure cementless acetabular shell is present, the surgeon can cement a constrained liner into the existing shell. The purpose of this study was to evaluate the clinical and radiographic outcome of this technique with use of a tripolar constrained liner that was cemented into a well-fixed cementless acetabular shell. METHODS: Between 1988 and 2000, constrained liners were cemented into thirty-one well-fixed cementless acetabular shells at three centers. The average age of the patients at the time of the index surgery was 72.1 years, and the indications for the procedure were recurrent hip instability in sixteen hips and intraoperative instability in fifteen hips. The patients were evaluated with respect to the clinical outcome and radiographic evidence of shell loosening and osteolysis. RESULTS: At an average duration of follow-up of 3.9 years, twenty-nine liners (94%) were securely fixed in the cementless shells and two constrained liners had failed. One liner failed because it separated from the cement, and one failed because of fracture of the capturing mechanism. Both hips were successfully revised with another cemented tripolar constrained liner. No acetabular component demonstrated radiographic evidence of progressive loosening or osteolysis. CONCLUSIONS: A constrained tripolar liner cemented into a secure, well-positioned cementless acetabular shell provides stability and durability at short-term follow-up. Careful attention to the preparation of the liner, the sizing of the component, and the cementing technique are likely to reduce the failure of this construct, which can be used for difficult cases of total hip instability.     

Medium-Term Results of Cementation of a Highly Cross-Linked Polyethylene Liner Into a Well-Fixed Acetabular Shell in Revision Hip Arthroplasty

The present study was undertaken to document outcomes of cementation of a highly cross-linked polyethylene (PE) liner into a well-fixed acetabular metal shell in 36 hips. All operations were performed by a single surgeon using only one type of liner. Patients were followed for a mean of 6.1 years (range, 3–8 years). Mean Harris hip score improved from 58 points preoperatively to 91 points postoperatively. There were no cases of PE liner dislodgement or progressive osteolysis. 1 hip (2.8%) required revision surgery for acetabular cup loosening with greater trochanteric fracture. Complications included 1 peroneal nerve palsy and 1 dislocation. The results of this study and previous reports demonstrated that cementation of highly cross-linked PE liner into well-fixed metal shell could provide good midterm durability.     

Management of Polyethylene Wear Associated With a Well-Fixed Modular Cementless Shell During Revision Total Hip Arthroplasty

We identified 128 revision total hip arthroplasties from 1993 to 2005 involving a well-fixed Harris-Galante Porous (HGP)-I or HGP-II acetabular component with minimum 2-year post-revision follow-up. Three treatment cohorts were identified. Of the hips that underwent modular liner exchange at revision, 14 hips (25%) required re-revision of the acetabular component, 8 for liner dislodgement, 3 for osteolysis and poly-wear, 2 for dislocation, and 1 for aseptic loosening. Of the hips that underwent revision of the well-fixed shell, 4 (15%) required subsequent re-revision of the acetabular component; 2 for dislocation and 2 for aseptic loosening. Six hips (27%) in the cemented liner group were re-revised; 4 for dislocation and 2 for loosening. Complete revision of a well-fixed HGP acetabular component is more reliable than liner exchange or liner cementation.     

单纯聚乙烯内衬更换在髋关节翻修手术中的应用

目的探讨聚乙烯内衬磨损而髋臼金属杯仍然同定良好者进行单纯髋臼内衬更换的技术和疗效。方法瑞金医院徉2003年2月至2007年3月期间,对16例HGⅡ型髋关节进行单纯内衬翻修手术,患者平均年龄63岁（51～82岁）,距离初次手术时间平均6．2年（3～8年）。5例出现髋臼内衬脱位,3例出现髋臼金属假体周围骨吸收。术前Harris评分81．7分（56～91分）。所有患者术中取出磨损髋臼内衬后,清除髋门内肉芽组织后,用骨水泥同定新的聚乙烯假体。3例假体周围骨吸收患者通过金属假体螺钉孔对缺损区域进行了异体骨打压植骨。结果16例髋关节术后随访2—6年,X线检查聚乙烯-骨水泥-金属杯界面没有松动迹象。3例髋臼金属杯周围植骨患者植骨愈合。随访中未发现感染及髋关节脱佗。髋关节了Harris评分87．6分（76～92分）。结论单纯聚乙烯内衬翻修具有手术操作简单、避免了金属杯取出继发髋臼骨缺损的优点。术后随访湿示患者功能恢复良好、聚乙烯假体固定牢固。     

Primary uncemented Harris-Galante acetabular components in patients 50 years old or younger: results at 10 to 12 years

Seventy-three patients (84 hips) 50 years or younger were treated with primary total hip arthroplasty using the Harris-Galante uncemented acetabular component. At a median followup of 10 years, there were seven acetabular metal shell revisions: five for osteolysis and one each for aseptic loosening and dislocation. There were 10 polyethylene exchanges without metal acetabular shell removal. None of the unrevised acetabular components was radiographically loose, but eight had pelvic osteolysis. The rate of 10-year survival without revision of the acetabular metal shell was 87.9% (95% confidence interval, 80.1%-95.7%). The same rate of survival without revision for aseptic acetabular component loosening was 97.3% (95% confidence interval, 92.9%-100%). Revision for aseptic acetabular loosening or polyethylene liner exchange or both was 84.5% (95% confidence interval, 75.8%-93.4%).     

Porous-Coated Cementless Acetabular Components Without Bulk Bone Graft in Revision Surgery

We previously reported the average 9.3-year (range, 5-13 years) results of 74 patients (83 hips) with porous-coated acetabular components that were placed without bulk bone graft at revision surgery. Since the previous report, 7 patients (7 hips) died before the minimum follow-up of 10 years, and 1 patient (1 hip) was lost to follow-up. We now report the average 15.6-year (range, 10-20 years) results for 66 patients (75 hips). Three additional acetabular components were removed or revised again: 2 for infection and 1 for dislodgement of the polyethylene liner from the metal shell. Overall, 7 (7%) components required removal or repeat revision. No shell was revised for aseptic loosening, and none was categorized as loose during the entire follow-up period.     

Intermediate- to Long-Term Results After Hybrid Total Hip Arthroplasty in Patients With Rheumatoid Arthritis

There have been few reports describing intermediate- to long-term results after hybrid total hip arthroplasty in patients with rheumatoid arthritis. We followed up 52 hips in 44 patients aged 5 men and 39 women, with a mean of 11.5 years (range, 5-23.5 years). Revisions had been performed in 6 hips in 6 patients: 1 both acetabular and femoral components for infection, 1 acetabular component for aseptic loosening, 3 acetabular components for recurrent dislocation, and 1 acetabular component for dislodgement of the polyethylene liner from the metal shell. None of other acetabular or femoral components were revised or found to be loose at the final follow-up. Although postoperative dislocation remains a concern, hybrid total hip arthroplasty had an acceptable result in patients with rheumatoid arthritis.     

Cementation of Cross-linked Polyethylene Liner Into Well-Fixed Acetabular Shells : Mean 6-Year Follow-Up Study

The purpose of this study was to evaluate retrospectively the outcomes of cementation of cross-linked polyethylene (PE) liner in a well-fixed metal shell in 23 hips with an average follow-up period of 6 years. The mean Harris hip score was 69.6 ± 12 (range, 46-83) points preoperatively. The average postoperative follow-up was 72.3 months (range, 56-100 months). At the final follow-up, the mean Harris hip score was 95.5 ± 3 (84-100) points. There was no change in the bone-shell interface. No new osteolytic lesions were identified. The lesions impacted with bone graft had united completely. The remaining osteolytic lesions had decreased in size. There was no recurrent osteolysis, hip dislocation, component migration, and failure at the cement-metal interface. The results of the current study revealed that cementation of cross-linked PE liner into a well-fixed shell provided good midterm durability.     

Are abductor muscle quality and previous revision surgery predictors of constrained liner failure in hip arthroplasty?

Dislocation is one of the most common complications of total hip arthroplasty. The use of constrained liners is an option for the management of chronic hip instability, typically used after other methods have failed. The purposes of this study were to evaluate the overall clinical outcomes and failure rates of a tripolar constrained liner design, to assess the radiographic outcomes of its use, and to examine whether various factors such as abductor mechanism quality and history of previous revision surgeries were associated with an increased risk of failure. Forty-three hips in 39 patients who had a mean follow-up of 51 months (range, 24–110 months) were reviewed. Ninety-one percent of the hips (39 of 43 hips) did not need any revisions over the study period. A new liner was implanted in all four failed hips with concurrent revision of the acetabular cup in three cases. No further dislocations occurred in this group. The mean hip score for surviving hips was 82 points (range, 38–100 points) at final follow-up. Radiographic evaluation revealed stable, well-fixed acetabular components in all surviving hips without progressive radiolucencies. No association was found between abductor muscle quality and the incidence of failure, but patients who experienced a constrained liner failure were more likely to have undergone at least one previous hip revision operation. Tripolar constrained acetabular liners can provide successful outcomes in patients with hip instability, although it is important not to rely on the use of a constrained liner alone in an attempt to compensate for other correctable factors such as component positioning.     

The Harris-Galante cementless THA: a 19- to 25-year follow-up study

The goal of this study was to evaluate the long-term survivorship of primary cementless total hip arthroplasty (THA) using Harris-Galante porous I acetabular and Harris-Galante porous femoral components. From July 1985 to December 1991, we performed primary cementless THA on 76 hips (70 patients). Twenty-nine patients (31 hips) died due to causes unrelated to the THA, and 6 patients (7 hips) were lost to follow-up. Of 76 hips (70 patients) studied, 38 hips (35 patients) were available for follow-up at a mean 22.5 years (range, 19-25 years) postoperatively. Mean patient age at index procedure was 51.2 years (range, 42-65 years). Average Harris Hip Score was 40.5 points preoperatively and 85.8 points at final follow-up. No patient had an early or late postoperative deep infection. Radiographically, the acetabular component fixation was stable in all 38 hips. The femoral component was bone-ingrown in 26 hips, stable-fibrous in 10, and unstable in 2. One unstable hip required revision of the femoral component. Dissociation of the polyethylene liner occurred in 3 hips without fractures of the metal locking tines and required revision of the polyethylene liner and the articular head. A total of 4 hips had documented revision, and 1 femoral component failed radiographically. The survival rate with the endpoint defined as revision surgery and radiographic loosening was 86.8% at 22.5 years of follow-up. Mean polyethylene wear was 0.085 mm/year (range, 0.031-0.15 mm). This study found that the Harris-Galante porous I acetabular and Harris-Galante porous femoral components produce excellent long-term results.     

Dissociation of Acetabular Polyethylene Liners With a Morse Taper Design

BackgroundPolyethylene liner dissociation is an uncommon complication of hip replacement. Dissociation has been associated with particular acetabular component designs. This study reviewed acetabular liner dissociations in a specific modular cup with a Morse taper locking mechanism that has not been previously reported.MethodsThe senior author performed 655 primary total hip arthroplasties with one particular design of acetabular component using Class A polyethylene liners and metal head articulation. Cases with revision surgery performed for acetabular liner dissociation were reviewed.ResultsSeven of 655 patients with this cup underwent revision surgery for a dissociated liner. Liner dissociation occurred at a mean of 73 months postoperatively. Patients presented with new-onset hip pain or squeaking, 4 of which developed symptoms acutely. Two patients treated with polyethylene liner exchange into the same cup required a second revision surgery for recurrent dissociation.ConclusionPolyethylene liner dissociation is an infrequent but possible complication associated with modular acetabular components using a Morse taper locking. Providers should be vigilant with long-term follow-up of patients with this acetabular system for patient complaints of catching or squeaking. Patients treated for liner dissociation should not have a new liner placed into the same acetabular shell given the risk for further dissociation.     

Complications of liner locking system in MicroStructured Omnifit acetabular components: A radiographic evaluation of 887 hips followed for 5-10 years

We evaluated 887 hips in 672 patients with uncemented MicroStructured Omnifit acetabular components for liner locking complications. We found 2 types of radiographic signs of liner locking system complications in 7 hips, developing between 2 and 4 years postoperatively. The incidence of liner locking system complications was 0.8% using this modular acetabular component. We recommend that a patient who has received a total hip arthroplasty including a MicroStructured Omnifit acetabular component should be monitored frequently for radiographic signs of liner locking system complications, especially with a polyethylene thickness of less than 8 mm.     

Further follow-up on socket fixation using a metal-backed acetabular component for total hip replacement. A minimum ten-year follow-up study

In 1982, Harris and White reported the data after a minimum five-year follow-up of fifty-three total hip replacements in forty-seven patients in whom a cemented metal-backed acetabular component had been used. There actually had been fifty-four total hip replacements in fifty-three hips, as in one hip a revision was done for a traumatic disruption of the initial acetabular component that occurred two months after the first insertion. Six of the fifty-four operations did not qualify for inclusion in this ten-year follow-up study, including four operations in three patients who had died before that time. The remaining forty-eight hips have been followed for ten to 13.5 years (mean, 11.3 years). With one exception, the ages of the patients at the time of the index operation ranged from seventeen to fifty years (mean, forty-one years). Six (12.5 per cent) of the forty-eight hips required revision because of symptomatic aseptic loosening of the acetabular component. In addition, two acetabular components, although they were not loose, were revised concomitantly with revision of the femoral component because of the presence of radiolucent lines at the cement-bone interface of the acetabular implant. One other acetabular component that was not loose was revised because of unexplained pain, one was removed because of sepsis, and for one only the polyethylene liner was exchanged because of damage to the polyethylene when the weld holding the femoral head to the femoral neck failed. Nine additional hips (19 per cent), although they were not revised, showed radiographic evidence of migration, and one (2 per cent) showed radiographic evidence of impending failure.(ABSTRACT TRUNCATED AT 250 WORDS)     

Cementation of a polyethylene liner into a metal acetabular shell: a biomechanical study

Cementation of a liner into a well-fixed acetabular shell is common in revision hip arthroplasty. We compare the biomechanical strengths of cemented liners with standard locked liners. Fifty polyethylene liners were inserted into acetabular shells using the standard locking mechanism or 1 of 2 cement types then loaded to failure by torsion or lever-out testing. Lever-out testing showed that all cemented liners failed at similar loads to standard locked liners. With torsion testing, cemented liners failed at significantly higher loads than standard locked liners; roughening the liner increased load to failure. Cementation of an acetabular liner into a metal shell is safe and strong and a good alternative to metal shell replacement. Saw roughening of the polyethylene liner strengthens the poly-cement interface.     

The use of cementless expansion acetabular component and an alumina-polyethylene bearing in total hip arthroplasty for osteonecrosis

We performed 114 consecutive primary total hip arthroplasties with a cementless expansion acetabular component in 101 patients for advanced osteonecrosis of the femoral head. The mean age of the patients at surgery was 51 years (36 to 62) and the mean length of follow-up was 110 months (84 to 129). The mean pre-operative Harris hip score of 47 points improved to 93 points at final follow-up. The polyethylene liner was exchanged in two hips during this period and one broken acetabular component was revised. The mean linear wear rate of polyethylene was 0.07 mm/year and peri-acetabular osteolysis was seen in two hips (1.9%). Kaplan-Meier analysis indicated that the survival of the acetabular component without revision was 97.8% (95% confidence interval 0.956 to 1.000) at ten years. Our study has shown that the results of THA with a cementless expansion acetabular component and an alumina-polyethylene bearing surface are good.     

Complications of liner locking system in MicroStructured Omnifit acetabular components: A radiographic evaluation of 887 hips followed for 5-10 years

We evaluated 887 hips in 672 patients with uncemented MicroStructured Omnifit acetabular components for liner locking complications. We found 2 types of radiographic signs of liner locking system complications in 7 hips, developing between 2 and 4 years postoperatively. The incidence of liner locking system complications was 0.8% using this modular acetabular component. We recommend that a patient who has received a total hip arthroplasty including a MicroStructured Omnifit acetabular component should be monitored frequently for radiographic signs of liner locking system complications, especially with a polyethylene thickness of less than 8 mm.     

Long-Term Outcomes of Cementing Highly Cross-Linked Polyethylene Liners Into Well-Fixed Acetabular Shells in Revision Total Hip Arthroplasty

BackgroundCementing a new liner into a secure, well-positioned metallic shell can be a less-invasive strategy in revision total hip arthroplasty (THA). This study aimed to report the mean 14-year outcomes of cementing highly cross-linked polyethylene (XLPE) liners into well-fixed acetabular shells in revision THAs.MethodsThis study reviewed a single-surgeon series of cementing XLPE liners into well-fixed acetabular components. Of the 52 hips (51 patients) evaluated, 48 hips (47 patients) that satisfied a minimum follow-up of 10 years were included. The Harris Hip score was used for clinical evaluation. Final hip radiographs were used to determine the extent of acetabular osteolysis and stability of the components. The mean age at index operation was 53 years (range, 32 to 72). The mean follow-up duration was 14 years (range, 10 to 18).ResultsThe mean Harris Hip score improved from 58 points (range, 23-81) preoperatively to 91 points (range, 45-100) at the final evaluation (P < .001). A total of 3 acetabular rerevisions were performed, all for aseptic loosening of the outer shell. One postoperative dislocation occurred, but it was successfully treated with a closed reduction. Final radiographs showed a significant reduction in acetabular osteolysis (P < .001). Implant survivorship free from any rerevision was 93.3% (95% confidence interval, 85.9-100%) at 14 years.ConclusionCementing an XLPE liner into a well-fixed acetabular shell in revision THA demonstrated excellent clinical and radiographic outcomes at a mean of 14 years postoperatively. This technique could be a safe and durable option in the absence of XLPE liners compatible with preimplanted shells.     

Complications of liner locking system in Micro-structured Omnifit acetabular components: a radiographic evaluation of 887 hips followed for 5-10 years

We evaluated 887 hips in 672 patients with uncemented MicroStructured Omnifit acetabular components for liner locking complications. We found 2 types of radiographic signs of liner locking system complications in 7 hips, developing between 2 and 4 years postoperatively. The incidence of liner locking system complications was 0.8% using this modular acetabular component. We recommend that a patient who has received a total hip arthroplasty including a MicroStructured Omnifit acetabular component should be monitored frequently for radiographic signs of liner locking system complications, especially with a polyethylene thickness of less than 8 mm.