A highly selective pyridoxal-based chemosensor for the detection of Zn(ii) and application in live-cell imaging; X-ray crystallography of pyridoxal-TRIS Schiff-base Zn(ii) and Cu(ii) complexes

In a simple, one-step reaction, we have synthesized a pyridoxal-based chemosensor by reacting tris(hydroxymethyl)aminomethane (TRIS) together with pyridoxal hydrochloride to yield a Schiff-base ligand that is highly selective for the detection of Zn(ii) ion. Both the ligand and the Zn(ii) complex have been characterized by ¹H & ¹³C NMR, ESI-MS, CHN analyses, and X-ray crystallography. The optical properties of the synthesized ligand were investigated in an aqueous buffer solution and found to be highly selective and sensitive toward Zn(ii) ion through a fluorescence turn-on response. The competition studies reveal the response for zinc ion is unaffected by all alkali and alkaline earth metals; and suppressed by Cu(ii) ion. The ligand itself shows a weak fluorescence intensity (quantum yield, Φ = 0.04), and the addition of zinc ion enhanced the fluorescence intensity 12-fold (quantum yield, Φ = 0.48). The detection limit for zinc ion was 2.77 × 10⁻⁸ M, which is significantly lower than the WHO''s guideline (76.5 μM). Addition of EDTA to a solution containing the ligand–Zn(ii) complex quenched the fluorescence, indicating the reversibility of Zn(ii) binding. Stoichiometric studies indicated the formation of a 2 : 1 L₂Zn complex with a binding constant of 1.2 × 10⁹ M⁻² (±25%). The crystal structure of the zinc complex shows the same hydrated L₂Zn complex, with Zn(ii) ion binding with an octahedral coordination geometry. We also synthesized the copper(ii) complex of the ligand, and the crystal structure showed the formation of a 1 : 1 adduct, revealing 1-dimensional polymeric networks with octahedral coordinated Cu(ii). The ligand was employed as a sensor to detect zinc ion in HEK293 cell lines derived from human embryonic kidney cells grown in tissue culture which showed strong luminescence in the presence of Zn(ii). We believe that the outstanding turn-on response, sensitivity, selectivity, lower detection limit, and reversibility toward zinc ion will find further application in chemical and biological science.

The synthesis, characterization, X-ray crystallography, and live-cell imaging of pyridoxal-TRIS Schiff-base ligand which is selective as a luminescence sensor to detect Zn(ii) ion, and the corresponding Zn(ii) and Cu(ii) complexes are described.     

The (CF3C(O)NH)(C6H5CH2NH)2P(O) phosphoric triamide as a novel carrier with excellent efficiency for Cu(ii) in a liquid membrane transport system

Transport of Ag(i), Cd(ii), Co(ii), Cu(ii), Ni(ii), Pb(ii) and Zn(ii) cations across a bulk liquid membrane (BLM) containing N,N′-dibenzyl-N′′-(2,2,2-trifluoroacetyl)-phosphoric triamide (PTC) as a new carrier is studied by atomic absorption spectrometry. The results show selective and efficient transport of the copper(ii) cation from aqueous solution in the presence of the other cations. Various factors are optimized in order to obtain maximum transport efficiency. The PTC ligand is characterized by single crystal X-ray diffraction analysis, IR, NMR (¹⁹F, ³¹P, ¹H, ¹³C) and mass spectroscopy. The complex formation reaction between copper(ii) and PTC is studied by a conductometric method, which shows the 1 : 1 stoichiometry for ligand and copper(ii).

Selective transport of Cu(ii) cation in the presence of six other cations across a bulk liquid membrane containing a novel phosphoric triamide carrier is studied.     

Alkaline earth metal ion coordination increases the radical scavenging efficiency of kaempferol

Flavonoids are used as natural additives and antioxidants in foods, and after coordination to metal ions, as drug candidates, depending on the flavonoid structure. The rate of radical scavenging of the ubiquitous plant flavonoid kaempferol (3,5,7,4′-tetrahydroxyflavone, Kaem) was found to be significantly enhanced by coordination of Mg(ii), Ca(ii), Sr(ii), and Ba(ii) ions, whereas the radical scavenging rate of apigenin (5,7,4′-trihydroxyflavone, Api) was almost unaffected by alkaline earth metal (AEM) ions, as studied for short-lived β-carotene radical cations (β-Car˙⁺) formed by laser flash photolysis in chloroform/ethanol (7 : 3) and for the semi-stable 2,2-diphenyl-1-picrylhydrazyl radical, DPPH˙, in ethanol at 25 °C. A 1 : 1 Mg(ii)–Kaem complex was found to be in equilibrium with a 1 : 2 Mg(ii)–Kaem₂ complex, while for Ca(ii), Sr(ii) and Ba(ii), only 1 : 2 AEM(ii)–Kaem complexes were detected, where all complexes showed 3-hydroxyl and 4-carbonyl coordination and stability constants of higher than 10⁹ L² mol⁻². The 1 : 2 Ca(ii)–Kaem₂ complex had the highest second order rate constant for both β-Car˙⁺ (5 × 10⁸ L mol⁻¹ s⁻¹) and DPPH˙ radical (3 × 10⁵ L mol⁻¹ s⁻¹) scavenging, which can be attributed to the optimal combination of the stronger electron withdrawing capability of the (n − 1)d orbital in the heavier AEM ions and their spatially asymmetrical structures in 1 : 2 AEM–Kaem complexes with metal ion coordination of the least steric hindrance of two perpendicular flavone backbones as ligands in the Ca(ii) complex, as shown by density functional theory calculations.

Radical scavenging activity of kaempferol is notably enhanced by Ca(ii) binding.     

Paramagnetic solid-state NMR assignment and novel chemical conversion of the aldehyde group to dihydrogen ortho ester and hemiacetal moieties in copper(ii)- and cobalt(ii)-pyridinecarboxaldehyde complexes

The complex chemical functionalization of aldehyde moieties in Cu(ii)- and Co(ii)-pyridinecarboxaldehyde complexes was studied. X-ray studies demonstrated that the aldehyde group (RCHO) of the four pyridine molecules is converted to dihydrogen ortho ester (RC(OCH₃)(OH)₂) and hemiacetal (RCH(OH)(OCH₃)) moieties in both 4-pyridinecarboxaldehyde copper and cobalt complexes. In contrast, the aldehyde group is retained when the 3-pyridinecarboxaldehyde ligand is complexed with cobalt. In the different copper complexes, similar paramagnetic ¹H resonance lines were obtained in the solid state; however, the connectivity with the carbon structure and the ¹H vicinities were done with 2D ¹H–¹³C HETCOR, ¹H–¹H SQ/DQ and proton spin diffusion (PSD) experiments. The strong paramagnetic effect exerted by the cobalt center prevented the observation of ¹³C NMR signals and chemical information could only be obtained from X-ray experiments. 2D PSD experiments in the solid state were useful for the proton assignments in both Cu(ii) complexes. The combination of X-ray crystallography experiments with DFT calculations together with the experimental results obtained from EPR and solid-state NMR allowed the assignment of NMR signals in pyridinecarboxaldehyde ligands coordinated with copper ions. In cases where the crystallographic information was not available, as in the case of the 3-pyridinecarboxaldehyde Cu(ii) complex, the combination of these techniques allowed not only the assignment of NMR signals but also the study of the functionalization of the substituent group.

The complex chemical functionalization of the aldehyde group was elucidated in copper and cobalt complexes for 4- and 3-pyridinecarboxaldehyde ligands.     

Cd(ii) removal by Fe(ii) surface chemically modified layered double hydroxide–graphene oxide: performance and mechanism

Cd(ii) adsorption onto Fe(ii) modified Layered double hydroxide–graphene oxide (LDH–GO@Fe(ii)) was investigated using batch experiments. With the modification of Fe(ii), LDH–GO maintained its structure, while Fe(ii) species formed non-crystalline iron oxide clusters on the surface of the LDH/GO. A kinetics study indicated that adsorption obeyed a pseudo-second-order rate law. The equilibrium data were fitted well with the Langmuir isotherm model. The maximum adsorption capacity of LDH–GO@Fe(ii)₁₀ was 28.98 mg g⁻¹, higher those that of pure LDH–GO and LDH–GO@Fe(ii)₅₀. The increased sorption capacities could be explained by the increased specific surface area. Modification with Fe(ii) would lead to the generation of amorphous Fe oxides and Fe could occupy the binding sites for Cd(ii), thus excess Fe in the structure will restrain the adsorption of Cd(ii). The XRD and XPS patterns revealed the formation of Cd(OH)₂ after adsorption. Batch experiments indicated that precipitation and surface complexation were the main pathways for Cd(ii) removal.

Fe(ii)-decorated LDH–GO composites had a high capacity for Cd(ii) removal. The mechanisms were controlled by surface-induced precipitation and complex formation.     

Theoretical study of ternary silver fluorides AgMF4 (M = Cu,Ni, Co) formation at pressures up to 20 GPa

Only several compounds bearing the Ag(ii) cation and other paramagnetic transition metal cations are known experimentally. Herein, we predict in silico stability and crystal structures of hypothetical ternary silver(ii) fluorides with copper, nickel and cobalt in 1 : 1 stoichiometry at a pressure range from 0 GPa up to 20 GPa employing the evolutionary algorithm in combination with DFT calculations. The calculations show that AgCoF₄ could be synthesized already at ambient conditions but this compound would host diamagnetic Ag(i) and high-spin Co(iii). Although none of the compounds bearing Ag(ii) could be preferred over binary substrates at ambient conditions, at increased pressure ternary fluorides of Ag(ii) featuring Cu(ii) and Ni(ii) could be synthesized, in the pressure windows of 7–14 and 8–15 GPa, respectively. All title compounds would be semiconducting and demonstrate magnetic ordering. Compounds featuring Ni(ii) and particularly Co(ii) should exhibit fundamental band gaps much reduced with respect to pristine AgF₂. The presence of Cu(ii) and Ni(ii) does not lead to electronic doping to AgF₂ layers, while Co(ii) tends to reduce Ag(ii) entirely to Ag(i).

Only several compounds bearing the Ag(ii) cation and other paramagnetic transition metal cations are known experimentally. Here, we predict as yet unknown AgMF₄ phases and their stability in function of pressure.     

Cytotoxic effect,generation of reactive oxygen/nitrogen species and electrochemical properties of Cu(ii) complexes in comparison to half-sandwich complexes of Ru(ii) with aminochromone derivatives

This paper describes the synthesis of new 6-aminoflavone (6AFl (3)) and 6-aminochromone (6AC (4)) complexes with Cu(ii) and Ru(ii) ions ([Cu(6AC)₂Cl₂] (3a), [Cu(6AFl)₂Cl₂] (4a), [Ru(p-cymene)(6AC)Cl₂] (4b)) and comparison of their properties with the previously described 7-aminoflavone (7AFl (1)) and 7-amino-2-methylchromone (7A2MC (2)) analogues. The cytotoxic effect of all these complexes against two human leukaemia cell lines (HL-60 and NALM-6), melanoma WM-115 cells and COLO205 cells, is determined. The cytotoxicity of copper(ii) complexes, especially [Cu(6AFl)₂Cl₂] (3a) was higher than ruthenium(ii) complexes with the same ligands. Their cytotoxic potency was also stronger in comparison to the referential agents like cisplatin. The pro-oxidative properties were determined for the most active complexes and their ability to generate ROS (reactive oxygen species)/RNS (reactive nitrogen species) in cancer cells was confirmed. The type of ligand and the chemical structure of the tested complexes had an influence on the level of ROS/RNS generated in cancer cells. The redox properties of the copper complex compounds were evaluated by cyclic voltammetry, and compared with the data for Ru(ii) complexes. The reduction and oxidation processes of Ru(iii)/Ru(ii) and Cu(ii)/Cu(i) were described as quasi-reversible.

New Cu(ii)/Ru(ii) complexes with 6-aminoflavone/chromone derivatives as ligands were synthesized and characterized. Their cytotoxicity, pro-oxidative and redox properties were investigated.     

Inner filter effect between upconversion nanoparticles and Fe(ii)–1,10-phenanthroline complex for the detection of Sn(ii) and ascorbic acid (AA)

Dual-function and multi-function sensors can use the same material or detection system to achieve the purpose of detection of two or more substances. Due to their high sensitivity and specificity, dual-function and multi-function sensors have potential applications in many fields. In this article, we designed a dual-function sensor to detect Sn(ii) and ascorbic acid (AA) based on the inner filter effect (IFE) between NaYF₄:Yb,Er@NaYF₄@PAA (UCNPs@PAA) and Fe(ii)–1,10-phenanthroline complex. Fe(ii)–1,10-phenanthroline complex has strong absorption in most of the ultraviolet-visible light range (350 nm–600 nm), and this absorption band overlaps with the green emission peak of UCNPs@PAA at 540 nm; Fe(ii)–1,10-phenanthroline complex can significantly quench the green light emission of UCNPs@PAA. When Sn(ii) or AA is added to the UCNPs@PAA/Fe(iii)/1,10-phenanthroline, they can reduce Fe(iii) to Fe(ii). Fe(ii) can react with 1,10-phenanthroline to form an orange complex, thereby quenching the green light emission of UCNPs@PAA. And the quenching efficiency is related to the concentration of Sn(ii) and AA; there is a linear relationship between quenching efficiency and the concentration of Sn(ii) and AA, within a certain concentration range the detection limits of this dual-function sensor for Sn(ii) and AA are 1.08 μM and 0.97 μM, respectively. In addition, the dual-function sensor can also detect Sn(ii) and AA in tap and spring water.

Based on the inner filter effect (IFE), we use UCNPs to develop a dual-function sensors, which can realize sensitive and selective detection for the Sn(ii) and ascorbic acid (AA).     

Melamine-based functionalized graphene oxide and zirconium phosphate for high performance removal of mercury and lead ions from water

Heavy metal ions are highly toxic and widely spread as environmental pollutants. This work reports the development of two novel chelating adsorbents, based on the chemical modifications of graphene oxide and zirconium phosphate by functionalization with melamine-based chelating ligands for the effective and selective extraction of Hg(ii) and Pb(ii) from contaminated water sources. The first adsorbent melamine, thiourea-partially reduced graphene oxide (MT-PRGO) combines the heavier donor atom sulfur with the amine and triazine nitrogen''s functional groups attached to the partially reduced GO nanosheets to effectively capture Hg(ii) ions from water. The MT-PRGO adsorbent shows high efficiency for the extraction of Hg(ii) with a capacity of 651 mg g⁻¹ and very fast kinetics resulting in a 100% removal of Hg(ii) from 500 ppb and 50 ppm concentrations in 15 second and 30 min, respectively. The second adsorbent, melamine zirconium phosphate (M-ZrP), is designed to combine the amine and triazine nitrogen''s functional groups of melamine with the hydroxyl active sites of zirconium phosphate to effectively capture Pb(ii) ions from water. The M-ZrP adsorbent shows exceptionally high adsorption affinity for Pb(ii) with a capacity of 681 mg g⁻¹ and 1000 mg g⁻¹ using an adsorbent dose of 1 g L⁻¹ and 2 g L⁻¹, respectively. The high adsorption capacity is also coupled with fast kinetics where the equilibrium time required for the 100% removal of Pb(ii) from 1 ppm, 100 ppm and 1000 ppm concentrations is 40 seconds, 5 min and 30 min, respectively using an adsorbent dose of 1 g L⁻¹. In a mixture of six heavy metal ions at a concentration of 10 ppm, the removal efficiency is 100% for Pb(ii), 99% for Hg(ii), Cd(ii) and Zn(ii), 94% for Cu(ii), and 90% for Ni(ii) while at a higher concentration of 250 ppm the removal efficiency for Pb(ii) is 95% compared to 23% for Hg(ii) and less than 10% for the other ions. Because of the fast adsorption kinetics, high removal capacity, excellent regeneration, stability and reusability, the MT-PRGO and M-ZrP are proposed as top performing remediation adsorbents for the solid phase extraction of Hg(ii) and Pb(ii), respectively from contaminated water.

Two novel chelating adsorbents are developed for the effective and selective extraction of Hg(ii) and Pb(ii) ions from contaminated water sources.     

Separation of iron(iii), zinc(ii) and lead(ii) from a choline chloride–ethylene glycol deep eutectic solvent by solvent extraction

Deep eutectic solvents (DESs) were used as alternatives to the aqueous phase in solvent extraction of iron(iii), zinc(ii) and lead(ii). The selective extraction of iron(iii) and zinc(ii) was studied from a feed of ethaline (1 : 2 molar ratio of choline chloride : ethylene glycol) and lactiline (1 : 2 molar ratio of choline chloride : lactic acid), with the former DES being more selective. A commercial mixture of trialkylphosphine oxides (Cyanex 923, C923) diluted in an aliphatic diluent selectively extracted iron(iii) from a feed containing also zinc(ii) and lead(ii). The subsequent separation of zinc(ii) from lead(ii) was carried out using the basic extractant Aliquat 336 (A336). The equilibration time and the extractant concentration were optimized for both systems. Iron(iii) and zinc(ii) were stripped using 1.2 mol L⁻¹ oxalic acid and 0.5 mol L⁻¹ aqueous ammonia, respectively. An efficient solvometallurgical flowsheet is proposed for the separation and recovery of iron(iii), lead(ii) and zinc(ii) from ethaline using commercial extractants. Moreover, the process was upscaled in a countercurrent mixer-settler set-up resulting in successful separation and purification.

Deep eutectic solvents (DESs) were used as alternatives to the aqueous phase in solvent extraction of iron(iii), zinc(ii) and lead(ii).     

Highly sensitive pork meat detection using copper(ii) tetraaza complex by electrochemical biosensor

Three copper(ii) tetraaza complexes [Cu(ii)LBr]Br (1a), [Cu(ii)L(CIO₄)](CIO₄) (2a) and [Cu(ii)L](CIO₄)₂ (2b), where L = 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradeca-7,14-diene were prepared and confirmed by FTIR, ¹HNMR and ¹³CNMR. The binding interaction of complex (1a, 2a, 2b) with calf thymus DNA (CT-DNA) was investigated using UV-vis absorption, luminescence titrations, viscosity measurements and molecular docking. The findings suggested that complex 1a, 2a and 2b bind to DNA by electrostatic interaction, and the strengths of the interaction were arranged according to 2b > 1a > 2a. The differences in binding strengths were certainly caused by the complexes'' dissimilar charges and counter anions. Complex 2b, with the biggest binding strength towards the DNA, was further applied in developing the porcine sensor. The developed sensor exhibits a broad linear dynamic range, low detection limit, good selectivity, and reproducibility. Analysis of real samples showed that the biosensor had excellent selectivity towards the pork meat compared to chicken and beef meat.

The electrochemical biosensor of porcine using copper(ii) tetraaza complex gave excellent performance with a broad dynamic range, low detection limit, good selectivity and reproducibility. The biosensor could sensitively detect pork DNA in real meat samples.     

Extraction of Pd(ii) and Pt(ii) from aqueous hydrochloric acid with 1,3-diaminocalix[4]arene: switching of the extraction selectivity by using different extraction modes

The extraction ability of 1,3-diaminocalix[4]arene (2: H₂L) toward platinum group metals (PGMs) has been investigated, which revealed that 2 is able to extract Pd(ii) and Pt(ii) from hydrochloric acid via different extraction modes. The extraction species for Pd(ii) and Pt(ii) are [PdL] and [Pt₂Cl₆(H₃L)₂], respectively, as evidenced by equilibrium analysis and X-ray crystallography. In [PdL], the two phenoxide oxygens and two amino nitrogens of L²⁻ coordinate to the Pd ion. On the other hand, in [Pt₂Cl₆(H₃L)₂], two anionic trichloro complexes PtCl₃⁻ are sandwiched between two H₃L⁺, in which one amino nitrogen directly coordinates to a PtCl₃⁻ species and another protonated amino group forms an ion pair with another PtCl₃⁻. Utilizing the different extraction modes, switching of the extraction selectivity has been achieved in the competitive extraction between Pd(ii) and Pt(ii) by varying the concentrations of H⁺ and Cl⁻ in the aqueous phase. Finally, from the extracted organic phase, back-extraction of Pd(ii) and Pt(ii) was easily performed, respectively.

1,3-Diaminocalix[4]arene shows extraction ability toward Pd(ii) and Pt(ii), the selectivity of which can be switched by changing the concentrations of H⁺ and Cl⁻ in the aqueous phase.     

Simultaneous removal of Sb(iii) and Cd(ii) in water by adsorption onto a MnFe2O4–biochar nanocomposite

In this study, a jacobsite–biochar nanocomposite (MnFe₂O₄–BC) was fabricated and used to simultaneously remove Sb(iii) and Cd(ii) from water via adsorption. The MnFe₂O₄–BC nanocomposite was prepared via a co-precipitation method and analyzed using various techniques. The results confirm the successful decoration of the biochar surface with MnFe₂O₄ nanoparticles. The maximum Sb(iii) removal efficiency was found to be higher from bi-solute solutions containing Cd(ii) than from single-solute systems, suggesting that the presence of Cd(ii) enhances the removal of Sb(iii). The Langmuir isotherm model describes well Sb(iii) and Cd(ii) removal via adsorption onto the MnFe₂O₄–BC nanocomposite. The maximum adsorption capacities are 237.53 and 181.49 mg g⁻¹ for Sb(iii) and Cd(ii), respectively, in a bi-solute system. Thus, the prepared MnFe₂O₄–BC nanocomposite is demonstrated to be a potential adsorbent for simultaneously removing Sb(iii) and Cd(ii) ions from aqueous solutions.

In this study, a jacobsite–biochar nanocomposite (MnFe₂O₄–BC) was fabricated and used to simultaneously remove Sb(iii) and Cd(ii) from water via adsorption.     

Ancillary ligand electro-activity effects towards phenyl acetylene homocoupling reaction by a nickel(ii) complex of a non-innocent O-amino phenol ligand: a mechanistic insight

A new Ni(ii) complex, was synthesized from the reaction of a non-innocent o-aminophenol ligand, and Ni(OAc)₂. The crystal structure of Ni^IIL₂^NIS (in which, IS stands for iminosemiquinone radical ligand with cyanide (shown by N in NIS) substituent on phenolate rings) exhibits the square planar environment of Ni(ii). The complex has been crystalized in the monoclinic system and Ni(ii) was surrounded by two oxygen and two nitrogen atoms of two ligands. Variable-temperature magnetic susceptibility measurement for crystalline samples of complex shows the effective magnetic moment per molecule (μ_eff) of near zero and the diamagnetic nature of the complex (S = 0) which emphasize that strong antiferromagnetic coupling prevailed between the two unpaired electrons of L^NIS ligands and Ni(ii) high spin electrons. The complex is EPR silent which confirms the diamagnetic character of the Ni(ii) complex. Electrochemical measurement (CV) indicates the redox-active character of ligand and metal. Ni^IIL₂^NIS complex proved to be effective for free metal- or base counterpart homocoupling of phenyl acetylene at room temperature. To the best of our knowledge, this is the first example of using Ni(ii) complex without using any reducing agent due to the promotion ancillary effect of non-innocent o-aminophenol ligand which acts as an “electron reservoir” and can reversibly accept and donate electrons in the catalytic cycle. The theoretical calculation confirms the magnetostructure, electronic spectrum and confirmed the suggested mechanism of phenyl acetylene homocoupling with emphasis on the role of non-innocent ligand electro-activity and the effect of ligand substituent on the efficiency and stability of the complex.

A new Ni(ii) complex, was synthesized from the reaction of a non-innocent o-aminophenol ligand, and Ni(OAc)₂.     

New insights into the competition between antioxidant activities and pro-oxidant risks of rosmarinic acid

Direct and indirect antioxidant activities of rosmarinic acid (RA) based on HOO˙/CH₃OO˙ radical scavenging and Fe(iii)/Fe(ii) ion chelation were theoretically studied using density functional theory at the M05-2X/6-311++G(2df,2p) level of theory. First, four antioxidant mechanisms including hydrogen atom transfer (HAT), radical adduct formation (RAF), proton loss (PL) and single electron transfer (SET) were investigated in water and pentyl ethanoate (PEA) phases. Regarding the free radical scavenging mechanism, HAT plays a decisive role with overall rate coefficients of 1.84 × 10³ M⁻¹ s⁻¹ (HOO˙) and 4.49 × 10³ M⁻¹ s⁻¹ (CH₃OO˙) in water. In contrast to PL, RAF and especially SET processes, the HAT reaction in PEA is slightly more favorable than that in water. Second, the [Fe(iii)(H₂O)₆]³⁺ and [Fe(ii)(H₂O)₆]²⁺ ion chelating processes in an aqueous phase are both favorable and spontaneous especially at the O5, site-1, and site-2 positions with large negative Δ_rG⁰ values and great formation constant K_f. Finally, the pro-oxidant risk of RA⁻ was also considered via the Fe(iii)-to-Fe(ii) complex reduction process, which may initiate Fenton-like reactions forming reactive HO˙ radicals. As a result, RA⁻ does not enhance the reduction process when ascorbate anions are present as reducing agents, whereas the pro-oxidant risk becomes remarkable when superoxide anions are found. The results encourage further attempts to verify the speculation using more powerful research implementations of the antioxidant activities of rosmarinic acid in relationship with its possible pro-oxidant risks.

Direct and indirect antioxidant activities of rosmarinic acid (RA) based on HOO˙/CH₃OO˙ radical scavenging and Fe(iii)/Fe(ii) ion chelation were theoretically studied using density functional theory at the M05-2X/6-311++G(2df,2p) level of theory.     

Facile transmetallation of [SbIII(DOTA)]− renders it unsuitable for medical applications

The antimony(iii) complex of 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetate (DOTA) has been prepared and its exceptionally low stability observed. The Sb(iii) ion in Na[Sb(DOTA)]·4H₂O shows an approximately square antiprismatic coordination geometry that is close to superimposable to the Bi(iii) geometry in [Bi(DOTA)]⁻ in two phases containing this anion, Na[Bi(DOTA)]·4H₂O, [H₃O][Bi(DOTA)]·H₂O for which structures are also described. Interestingly, DOTA itself in [(H₆DOTA)]Cl₂·4H₂O·DMSO shows the same orientation of the N₄O₄ metal binding cavity reflecting the limited flexibility of DOTA in an octadentate coordination mode. In 8-coordinate complexes it can however accommodate M(iii) ions with r_ion spanning a relatively wide range from 87 pm (Sc(iii)) to 117 pm (Bi(iii)). The larger Bi³⁺ ion appears to be the best metal–ligand size match since [Bi(DOTA)]⁻ is associated with greater complex stability. In the solution state, [Sb(DOTA)]⁻ is extremely susceptible to transmetallation by trivalent ions (Sc(iii), Y(iii), Bi(iii)) and, significantly, even by biologically important divalent metal ions (Mg(ii), Ca(ii), Zn(ii)). In all cases just one equivalent is enough to displace most of the Sb(iii). [Sb(DOTA)]⁻ is resistant to hydrolysis; however, since biologically more abundant metal ions easily substitute the antimony, DOTA complexes will not be suitable for deployment for the delivery of the, so far unexploited, theranostic isotope pair ¹¹⁹Sb and ¹¹⁷Sb.

The antimony(iii) complex of 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetate (DOTA) has been prepared and its exceptionally low stability observed.     

Synthesis and characterization of a surface-grafted Pb(ii)-imprinted polymer based on activated carbon for selective separation and pre-concentration of Pb(ii) ions from environmental water samples

Even the lowest concentration level of lead (Pb) in the human body is dangerous to health due to its bioaccumulation and high toxicity. Therefore, it is very important to develop selective and fast adsorption methods for the removal of Pb(ii) from various samples. In this paper, a new Pb(ii) ion-imprinted polymer (Pb(ii)-IIP) was prepared with surface imprinting technology by using lead nitrate as a template, for the solid-phase extraction of trace Pb(ii) ions in environmental water samples. The imprinted polymer was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy and N₂ adsorption–desorption isotherms. The separation/pre-concentration conditions for Pb(ii) were investigated, including the effects of pH, shaking time, sample flow rate, elution conditions and interfering ions. Compared with non-imprinted particles, the ion-imprinted polymer had a higher selectivity and adsorption capacity for Pb(ii). The pseudo-second-order kinetics model and Langmuir isotherm model fitted well with the adsorption data. The relative selectivity factor values (α_r) of Pb(ii)/Zn(ii), Pb(ii)/Ni(ii), Pb(ii)/Co(ii) and Pb(ii)/Cu(ii) were 168.20, 192.71, 126.13 and 229.39, respectively, which were all much greater than 1. The prepared Pb(ii)-imprinted polymer was shown to be promising for the separation/pre-concentration of trace Pb(ii) from natural water samples. The adsorption and desorption mechanisms were also proposed.

Even the lowest concentration level of lead (Pb) in the human body is dangerous to health due to its bioaccumulation and high toxicity.     

A novel catalytic kinetic method for the determination of mercury(ii) in water samples

Mercury(ii) ions act as catalyst in the substitution of cyanide ion in hexacyanoruthenate(ii) by pyrazine (Pz) in an acidic medium. This property of Hg(ii) has been utilized for its determination in aqueous solutions. The progress of reaction was followed spectrophotometrically by measuring the increase in absorbance of the yellow colour product, [Ru(CN)₅Pz]³⁻ at 370 nm (λ_max, ε = 4.2 × 10³ M⁻¹ s⁻¹) under the optimized reaction conditions; 5.0 × 10⁻⁵ M [Ru(CN)₆⁴⁻], 7.5 × 10⁻⁴ M [Pz], pH 4.00 ± 0.02, ionic strength (I) = 0.05 M (KCl) and temp. 45.0 ± 0.1 °C. The proposed method is based on the fixed time procedure under optimum reaction conditions. The linear regression (calibration) equations between the absorbance at fixed times (t = 15, 20 and 25 min) and [Hg(ii)] were established in the range of 1.0 to 30.0 × 10⁻⁶ M. The detection limit was found to be 1.5 × 10⁻⁷ M of Hg(ii). The effect of various foreign ions on the proposed method was also studied and discussed. The method was applied for the determination of Hg(ii) in different wastewater samples. The present method is simple, rapid and sensitive for the determination of Hg(ii) in trace amount in the environmental samples.

Mercury(ii) ions act as catalyst in the substitution of cyanide ion in hexacyanoruthenate(ii) by pyrazine (Pz) in an acidic medium.     

Positive effects of concomitant heavy metals and their reduzates on hexavalent chromium removal in microbial fuel cells

Cr(vi) laden wastewaters generally comprise a range of multiple heavy metals such as Au(iii) and Cu(ii) with great toxicity. In the present study, cooperative cathode modification by biogenic Au nanoparticles (BioAu) reduced from aqueous Au(iii) and in situ Cu(ii) co-reduction were investigated for the first time to enhance Cr(vi) removal in microbial fuel cells (MFCs). With the co-existence of Cu(ii) in the catholyte, the MFC with carbon cloth modified with nanocomposites of multi-walled carbon nanotubes blended with BioAu (BioAu/MWCNT) obtained the highest Cr(vi) removal rate (4.07 ± 0.01 mg L⁻¹ h⁻¹) and power density (309.34 ± 17.65 mW m⁻²), which were 2.73 and 3.30 times as high as those for the control, respectively. The enhancements were caused by BioAu/MWCNT composites and deposited reduzates of Cu(ii) on the cathode surface, which increased the adsorption capacity, electronic conductivity and electrocatalytic activity of the cathode. This study provides an alternative approach for efficiently remediating co-contamination of multiple heavy metals and simultaneous bioenergy recovery.

The cooperative cathode modification by BioAu from Au(iii) and in situ Cu(ii) co-reduction enhanced Cr(vi) removal and bioelectricity generation in MFCs.     

A simple and cost-effective paper-based and colorimetric dual-mode detection of arsenic(iii) and lead(ii) based on glucose-functionalized gold nanoparticles

We report a simple and cost-effective paper-based and colorimetric dual-mode detection of As(iii) and Pb(ii) based on glucose-functionalized gold nanoparticles under optimized conditions. The paper-based detection of As(iii) and Pb(ii) is based on the change in the signal intensity of AuNPs/Glu fabricated on a paper substrate after the deposition of the analyte using a smartphone, followed by processing with the ImageJ software. The colorimetric method is based on the change in the color and the red shift of the localized surface plasmon resonance (LSPR) absorption band of AuNPs/Glu in the region of 200–800 nm. The red shift (Δλ) of the LSPR band observed was from 525 nm to 660 nm for As(iii) and from 525 nm to 670 nm for Pb(ii). The mechanism of dual-mode detection is due to the non-covalent interactions of As(iii) and Pb(ii) ions with glucose molecule present on the surface AuNPs, resulting in the aggregation of novel metal nanoparticles. The calibration curve gave a good linearity range of 20–500 μg L⁻¹ and 20–1000 μg L⁻¹ for the determination of As(iii) and Pb(ii) with the limit of detection of 5.6 μg L⁻¹ and 7.7 μg L⁻¹ for both metal ions, respectively. The possible effects of different metal ions and anions were also investigated but did not cause any significant interference. The employment of AuNPs/Glu is successfully demonstrated for the determination of As(iii) and Pb(ii) using paper-based and colorimetric sensors in environmental water samples.

We report a simple and cost-effective paper-based and colorimetric dual-mode detection of As(iii) and Pb(ii) based on glucose-functionalized gold nanoparticles under optimized conditions.