Hydrodesulfurization of dibenzothiophene using Pd-promoted Co–Mo/Al2O3 and Ni–Mo/Al2O3 catalysts coupled with ionic liquids at ambient operating conditions

Sulfur compounds in fuel oils are a major source of atmospheric pollution. This study is focused on the hydrodesulfurization (HDS) of dibenzothiophene (DBT) via the coupled application of 0.5 wt% Pd-loaded Co–Mo/Al₂O₃ and Ni–Mo/Al₂O₃ catalysts with ionic liquids (ILs) at ambient temperature (120 °C) and pressure (1 MPa H₂). The enhanced HDS activity of the solid catalysts coupled with [BMIM]BF₄, [(CH₃)₄N]Cl, [EMIM]AlCl₄, and [(n-C₈H₁₇)(C₄H₉)₃P]Br was credited to the synergism between hydrogenation by the former and extractive desulfurization and better H₂ transport by the latter, which was confirmed by DFT simulation. The Pd-loaded catalysts ranked highest by activity i.e. Pd–Ni–Mo/Al₂O₃ > Pd–Co–Mo/Al₂O₃ > Ni–Mo/Al₂O₃ > Co–Mo/Al₂O₃. With mild experimental conditions of 1 MPa H₂ pressure and 120 °C temperature and an oil : IL ratio of 10 : 3.3, DBT conversion was enhanced from 21% (by blank Ni–Mo/Al₂O₃) to 70% by Pd–Ni–Mo/Al₂O₃ coupled with [(n-C₈H₁₇)(C₄H₉)₃P]Br. The interaction of polarizable delocalized bonds (in DBT) and van der Waals forces influenced the higher solubility in ILs and hence led to higher DBT conversion. The IL was recycled four times with minimal loss of activity. Fresh and spent catalysts were characterized by FESEM, ICP-MS, EDX, XRD, XPS and BET surface area techniques. GC-MS analysis revealed biphenyl as the major HDS product. This study presents a considerable advance to the classical HDS processes in terms of mild operating conditions, cost-effectiveness, and simplified mechanization, and hence can be envisaged as an alternative approach for fuel oil processing.

Synergistic application of ionic liquids with Pd loaded Co–Mo@Al₂O₃ and Ni–Mo@Al₂O₃ catalysts for efficient hydrodesulfurization of dibenzothiophene at ambient conditions.     

Effect of cobalt addition on the structure and properties of Ni–MCM-41 for the partial oxidation of methane to syngas

A one-step hydrothermal crystallization method was used to synthesize Co–Ni–MCM-41 catalysts for the partial oxidation of methane to syngas reaction. Co was added as an assistant in the synthesis process. The formation of a Ni–Co alloy decreased the damage of Ni ions to the framework of MCM-41. The Ni–Co alloy introduced more Ni into the channel exposing more active sites. The properties of the synthesized catalysts were characterized by XRD, N₂ adsorption–desorption, TEM, ICP, FT-IR, H₂-TPR, XPS and TGA techniques. Co–Ni–MCM-41 catalysts showed superior catalytic performance and sintering resistance than Ni–MCM-41 catalyst without Co. The Ni–Co alloy inhibited the formation of the NiO, thus reducing the sintering of the catalyst. The result was attributed to higher metal dispersion and more regular pore structure of the Co–Ni–MCM-41 catalysts. When the Co content was 1%, a conversion of 88% and selectivity of 87% was achieved.

The Ni–Co alloy confined within MCM-41 improved dispersibility and the stability of Ni.     

Microstructure,friction and corrosion resistance properties of a Ni–Co–Al2O3 composite coating

Ni–Co–Al₂O₃ composite coatings were prepared by pulsed electrodeposition and electrophoresis–electrodeposition on aluminum alloy. The content of Al₂O₃ particles of the Ni–Co–Al₂O₃ composite coating prepared by electrophoresis–electrodeposition was significantly higher than the composite coating prepared by pulsed electrodeposition. The composite coating prepared by electrophoresis–electrodeposition exhibited a better anti-wear performance than that prepared by pulsed electrodeposition. The morphology, composition and microstructure of the composite coatings were determined by means of X-ray diffractometer (XRD) and scanning electron microscopy (SEM). The hardness and friction properties of the samples were tested on the microhardness tester and the friction and wear loss tester respectively.

Ni–Co–Al₂O₃ composite coatings were prepared by pulsed electrodeposition and electrophoresis–electrodeposition on aluminum alloy.     

Electrochemical performance of porous Ni-alloy electrodes for hydrogen evolution reaction from seawater electrolysis

The hydrogen evolution reaction in seawater is investigated using porous Ni–Cr–Fe, Ni–Fe–Mo, Ni–Fe–C and Ni–Ti electrodes, prepared by elemental powder reactive synthesis methods. The open porosity of the four kinds of electrode materials is 23.05%, 20.47%, 25.27%, and 29.05%, respectively. The electrochemical performance of the four kinds of electrodes has been researched by polarization measurement, cyclic voltammetry and electrochemical impedance spectroscopy. The preliminary results demonstrate that the porous Ni–Cr–Fe electrode has superior catalytic activity and relatively good long-term stability for hydrogen evolution reaction in seawater. The high efficiency and reasonable stability of the porous Ni–Cr–Fe electrode catalyst demonstrate its promising applications in the rising hydrogen revolution.

The hydrogen evolution reaction in seawater is investigated using porous Ni–Cr–Fe, Ni–Fe–Mo, Ni–Fe–C and Ni–Ti electrodes, prepared by elemental powder reactive synthesis methods.     

Facile preparation of porous sheet–sheet hierarchical nanostructure NiO/Ni–Co–Mn–Ox with enhanced specific capacity and cycling stability for high performance supercapacitors

NiO, Ni–Co–Mn–O_x and NiO/Ni–Co–Mn–O_x on nickel foam substrates were prepared via a chemical bath deposition–calcination. The thermodynamic behavior was observed by TG/DTA. The chemical structure and composition, phase structure and microstructures were tested by XPS, XRD, FE-SEM and TEM. The electrochemical performance was measured by CV, GCD and EIS. The mechanism for formation and enhancing electrochemical performance is also discussed. Firstly, the precursors such as NiOOH, CoOOH and MnOOH grow on nickel foam substrates from a homogeneous mixed solution via chemical bath deposition. Thereafter, these precursors are calcined and decomposed into NiO, Co₃O₄ and MnO₂ respectively under different temperatures in a muffle furnace. Notably, NiO/Ni–Co–Mn–O_x on nickel foam substrates reveals a high specific capacity with 1023.50 C g⁻¹ at 1 A g⁻¹ and an excellent capacitance retention with 103.94% at 5 A g⁻¹ after 3000 cycles in 2 M KOH, its outstanding electrochemical performance and cycling stability are mainly attributed to a porous sheet–sheet hierarchical nanostructure and synergistic effects of pseudo-capacitive materials and excellent redox reversibility. Therefore, this research offers a facile synthesis route to transition metal oxides for high performance supercapacitors.

NiO, Ni–Co–Mn–O_x and NiO/Ni–Co–Mn–O_x on nickel foam substrates were prepared via a chemical bath deposition–calcination.     

Boosting the singlet oxygen production from H2O2 activation with highly dispersed Co–N-graphene for pollutant removal

Singlet oxygen (¹O₂) is a promising reactive species for the selective degradation of organic pollutants. However, it is difficult to generate ¹O₂ from H₂O₂ activation with high efficiency and selectivity. In this work, a graphene-supported highly dispersed cobalt catalyst with abundant Co–N_x active sites (Co–N-graphene) was synthesized for activating H₂O₂. The Co–N-graphene catalyzed H₂O₂ reaction system selectively catalyzed ¹O₂ production associated with the superoxide radical (O₂˙⁻) as the critical intermediate, as proven by scavenger experiments, electron spin resonance (ESR) spin trapping and a kinetic solvent isotope effect study. This resulted in excellent degradation efficiency towards the model organic pollutant methylene blue (MB), with an outstanding pseudo-first-order kinetic rate constant of 0.432 min⁻¹ (g L_catalyst⁻¹)⁻¹ under optimal reaction conditions (C_H2O2 = 400 mM, initial pH = 9). Furthermore, this Co–N-graphene catalyst enabled strong synergy with HCO₃⁻ in accelerating MB degradation, whereas the scavenger experiment implied that the synergy herein differed significantly from the current Co²⁺–HCO₃⁻ reaction system, in which contribution of O₂˙⁻ was only validated with a Co–N-graphene catalyst. Therefore, this work developed a novel catalyst for boosting ¹O₂ production from H₂O₂ activation and will extend the inventory of catalysts for advanced oxidation processes.

A graphene-supported highly dispersed cobalt catalyst with abundant Co–N_x active sites was synthesized to boost ¹O₂ production from H₂O₂ activation, exhibiting excellent degradation efficiency towards the model organic pollutant methylene blue.     

Design and synergistic effect of nano-sized epoxy-NiCo2O4 nanocomposites for anticorrosion applications

In the present work, we evaluated the corrosion inhibition properties of a ligand and mixed metal oxide nanocomposite. The ligand and mixed nickel–cobalt complex were synthesized using 1-naphthoic acid and aminoguanidine with the formulae [C₁₁H₇O₂(CN₄H₅)(CN₄H₆)]·H₂O and {Ni–Co[(CH₅N₄)₂(C₁₁H₇O₂)₂]}·H₂O, respectively. After their synthesis, physicochemical techniques such as CHNS analysis, infrared and UV-visible spectroscopy, thermal analysis, and X-ray diffraction (XRD) were employed to characterize both the synthesized ligand and nickel–cobalt complex. The metal oxide prepared from the decomposition of the metal complex was also characterized using several techniques to confirm its bonding and structure. In addition, the corrosion inhibition efficiency of the epoxy-ligand and epoxy-NiCo₂O₄ nanocomposite on mild steel (MS) in 3 M hydrochloric acid (HCl), 1.5 M sulfuric acid (H₂SO₄), and 0.5 M phosphoric acid (H₃PO₄) solution was examined and compared using weight loss measurements, Tafel plots, isotherms and electrochemical impedance spectroscopy (EIS). The results from the electrochemical studies disclosed that the epoxy coating of mixed metal oxides with 0.8 ppm concentration yielded excellent corrosion protection. The SEM images of mild steel and mild steel coated with epoxy-ligand/epoxy-NiCo₂O₄ in HCl confirmed the anti-corrosive behavior of the synthesized compounds. Hence, the as-prepared material can be a next-generation tool for sustainable anti-corrosive coatings.

This study reports the synthesis of nano-sized epoxy-NiCo₂O₄ nanocomposites and their anti-corrosive efficiency to attain sustainable development.     

Unravelling the one-pot conversion of biomass-derived furfural and levulinic acid to 1,4-pentanediol catalysed by supported RANEY® Ni–Sn alloy catalysts

Bimetallic Ni–Sn alloys have been recognised as promising catalysts for the transformation of furanic compounds and their derivatives into valuable chemicals. Herein, we report the utilisation of a supported bimetallic RANEY® nickel–tin alloy supported on aluminium hydroxide (RNi–Sn(x)/AlOH; x is Ni/Sn molar ratio) catalysts for the one-pot conversion of biomass-derived furfural and levulinic acid to 1,4-pentanediol (1,4-PeD). The as prepared RNi–Sn(1.4)/AlOH catalyst exhibited the highest yield of 1,4-PeD (78%). The reduction of RNi–Sn(x)/AlOH with H₂ at 673–873 K for 1.5 h resulted in the formation of Ni–Sn alloy phases (e.g., Ni₃Sn and Ni₃Sn₂) and caused the transformation of aluminium hydroxide (AlOH) to amorphous alumina (AA). The RNi–Sn(1.4)/AA 673 K/H₂ catalyst contained a Ni₃Sn₂ alloy as the major phase, which exhibited the best yield of 1,4-PeD from furfural (87%) at 433 K, H₂ 3.0 MPa for 12 h and from levulinic acid (up to 90%) at 503 K, H₂ 4.0 MPa, for 12 h. Supported RANEY® Ni–Sn(1.5)/AC and three types of supported Ni–Sn(1.5) alloy (e.g., Ni–Sn(1.5)/AC, Ni–Sn(1.5)/c-AlOH, and Ni–Sn(1.5)/γ-Al₂O₃) catalysts afforded high yields of 1,4-PeD (65–87%) both from furfural and levulinic acid under the optimised reaction conditions.

The RANEY® Ni–Sn(x) alloy catalysed the one-pot conversion of biomass-derived furfural and levulinic acid to allow remarkable yield of 1,4-pentanediol (up to 90%) under the mild reaction conditions.     

Wear and corrosion resistance of Co–P coatings: the effects of current modes

In this work, Co–P coatings were deposited from a chloride-based bath by direct current (DC), pulse current (PC) and pulse reverse current (PRC) methods, respectively. The effects of current modes on the microstructure, composition, microhardness, wear resistance and corrosion resistance of the Co–P coatings were explored. Results showed that the P content in the Co–P coatings increased and the surface roughness decreased in the sequence of DC, PC and PRC methods. The coatings with low P content deposited by DC and PC methods are crystalline with fcc and hcp structures, respectively, while the coating with high P content deposited by the PRC method is amorphous. Comparing to DC and PC methods, the PRC method can evidently improve the microhardness, wear resistance and corrosion resistance of Co–P coatings. The excellent wear and corrosion resistance of the Co–P coatings deposited by the PRC method could be attributed to its high P content, smooth surface and amorphous structure.

The P content in the Co–P coatings increased in the sequence of DC, PC and PRC methods. The PRC Co–P coating has better wear and corrosion resistance than DC and PC Co–P coatings.     

Synergistic effect of Co–Ni co-bridging with MoS2 nanosheets for enhanced electrocatalytic hydrogen evolution reactions

The depletion of fossil fuels and associated environmental problems have drawn our attention to renewable energy resources in order to meet the global energy demand. Electrocatalytic hydrogen evolution has been considered a potential energy solution due of its high energy density and environment friendly technology. Herein, we have successfully synthesized a noble-metal-free Co–Ni/MoS₂ nanocomposite for enhanced electrocatalytic hydrogen evolution. The nanocomposite has been well characterized using HRTEM, elemental mapping, XRD, and XPS analysis. The as-synthesized nanocomposite exhibits a much smaller onset potential and better current density than those of Co–MoS₂, Ni–MoS₂ and MoS₂, with a Tafel value of 49 mV dec⁻¹, which is comparable to that of a commercial Pt/C catalyst. The synergistic effect and interfacial interaction of Co–Ni bimetallic nanoparticles enhances the intrinsic modulation in the electronic structure resulting in an improved HER performance. Moreover, the electrochemical impedance spectroscopic results suggest smaller resistance values for the Co–Ni/MoS₂ nanocomposite, compared to those for the charge transfer of bare nanosheets, which increase the faradaic process and in turn enhance the HER kinetics for a better performance. Our as-synthesized Co–Ni/MoS₂ nanocomposite holds great potential for the future synthesis of noble-metal-free catalysts.

A noble-metal-free Co–Ni/MoS₂ nanocomposite was synthesized, which showed enhanced electrocatalytic hydrogen evolution performance.     

Synthesis of a three-dimensional cross-linked Ni–V2O5 nanomaterial in an ionic liquid for lithium-ion batteries

A three-dimensional cross-linked Ni–V₂O₅ nanomaterial with a particle size of 250–300 nm was successfully prepared in a 1-butyl-3-methylimidazole bromide ionic liquid (IL). The formation of this structure may follow the rule of dissolution–recrystallization and the ionic liquid, as both a dissolution and structure-directing agent, plays an important role in the formation of the material. After calcination of the precursor, the active material (Ni–V₂O₅–IL) was used as an anode for lithium-ion batteries. The designed anode exhibited excellent electrochemical performance with 765 mA h g⁻¹ at a current density of 0.3 A g⁻¹ after 300 cycles, which is much higher than that of a NiVO–W material prepared via a hydrothermal method (305 mA h g⁻¹). These results show the remarkable superiority of this novel electrode material synthesized in an ionic liquid.

A three-dimensional cross-linked Ni–V₂O₅ nanomaterial with a particle size of 250–300 nm was successfully prepared in a 1-butyl-3-methylimidazole bromide ionic liquid (IL).     

The promoted catalytic hydrogenation performance of bimetallic Ni–Co–B noncrystalline alloy nanotubes

A noncrystalline Ni–B alloy in the shape of nanotubes has demonstrated its superior catalytic performance for some hydrogenation reactions. Remarkable synergistic effects have been observed in many reactions when bimetallic catalysts were used; however, bimetallic noncrystalline alloy nanotubes are far less investigated. Here, we report a simple acetone-assisted lamellar liquid crystal approach for synthesizing a series of bimetallic Ni–Co–B nanotubes and investigate their catalytic performances. The dilution effect of acetone on liquid crystals was characterized by small-angle X-ray diffraction (SAXRD) and scanning electron microscopy (SEM). The Ni/Co molar ratio of the catalyst was varied to study the composition, porous structure, electronic interaction, and catalytic efficiency. In the liquid-phase hydrogenation of p-chloronitrobenzene, the as-prepared noncrystalline alloy Ni–Co–B nanotubes exhibited higher catalytic activity and increased stability as compared to Ni–B and Co–B alloy nanotubes due to electronic interactions between the nickel and cobalt. The excellent hydrogenation performance of the Ni–Co–B nanotubes was attributed to their high specific surface area and the characteristic confinement effects, compared with Ni–Co–B nanoparticles.

Ni–Co–B noncrystalline alloy nanotubes exhibited higher catalytic activity and better stability due to the synergistic interactions between nickel and cobalt.     

Effect of Re promoter on the structure and catalytic performance of Ni–Re/Al2O3 catalysts for the reductive amination of monoethanolamine

In this paper, Ni/Al₂O₃ catalysts (15 wt% Ni) with different Re loadings were prepared to investigate the effect of Re on the structure and catalytic performance of Ni–Re/Al₂O₃ catalysts for the reductive amination of monoethanolamine. Reaction results reveal that the conversion and ethylenediamine selectivity increase significantly with increasing Re loading up to 2 wt%. Ni–Re/Al₂O₃ catalysts show excellent stability during the reductive amination reaction. The characterization of XRD, DR UV-Vis spectroscopy, H₂-TPR, and acidity–basicity measurements indicates that addition of Re improves the Ni dispersion, proportion of octahedral Ni²⁺ species, reducibility, and acid strength for Ni–Re/Al₂O₃ catalysts. The Ni15 and Ni15–Re2 catalysts were chosen for in-depth study. The results from SEM-BSE, TEM, and CO-TPD indicate that smaller Ni⁰ particle size and higher Ni⁰ surface area are obtained in the reduced Ni–Re/Al₂O₃ catalysts. Results from in situ XPS and STEM-EDX line scan suggest that Re species show a mixture of various valances and have a tendency to aggregate on the surface of Ni⁰ particles. During reaction, the Ni⁰ particles on the Al₂O₃ support are stabilized and the sintering process is effectively suppressed by the incorporation of Re. It could be concluded that sufficient Ni⁰ sites, the collaborative effect of Ni–Re, and brilliant stability contribute to the excellent catalytic performance of Ni–Re/Al₂O₃ catalysts for the reductive amination of monoethanolamine.

Re promoters improve the catalyst performance and stability of Ni–Re/Al₂O₃ catalysts for the reductive amination of monoethanolamine.     

Comparison on the immersion corrosion and electrochemical corrosion resistance of WC–Al2O3 composites and WC–Co cemented carbide in NaCl solution

WC–15 wt% Al₂O₃ composites were prepared via hot pressing sintering technology. The corrosion behaviors of WC–Al₂O₃ composites and traditional WC–Co cemented carbide in NaCl solution were studied by immersion corrosion and electrochemical technique. The impedance value of the WC–Al₂O₃ composite increased more rapidly than WC–Co cemented carbide during the 24 hours, which indicated that WC–Al₂O₃ composites had a more compact passivation film than WC–Co cemented carbide. The results confirmed that the corrosion resistance of WC–Al₂O₃ composites was higher than that of WC–Co cemented carbide in NaCl solution. The corrosion mechanisms of WC–Al₂O₃ composites and WC–Co cemented carbide in NaCl solution were also revealed by SEM, EDS, XPS and Raman. The corrosion products of WC–Al₂O₃ composites mainly contain WO₃, while for WC–Co cemented carbide they are Co(OH)₂, Co₃O₄ and WO₃. The different corrosion mechanism of the two materials is attributed to the Al₂O₃ phase instead of the Co binder, which avoids the galvanic corrosion between the WC phase and the Co binder.

WC–Al₂O₃ composites possess higher corrosion resistance compared with WC–Co cemented carbide. The main corrosion mechanism for WC–Al₂O₃ composites is the oxidation of the WC phase.     

Formation of nickel–cobalt sulphide@graphene composites with enhanced electrochemical capacitive properties

Here, nickel–cobalt sulphide particles embedded in graphene layers (porous Ni–Co–S@G), were successfully prepared by one-step annealing of metallocene/metal–organic framework (MOF) hybrids involving simultaneous carbonization and sulfidation. Benefiting from the porous structure, highly conductive graphene layers and large loading of super-capacitive Ni–Co–S, the obtained Ni–Co–S@G composites exhibited excellent electrochemical performance with a specific capacitance of 1463 F g⁻¹ at a current density of 1 A g⁻¹. A flexible solid-state asymmetric supercapacitor (ASC), assembled with Ni–Co–S@G and active carbon, demonstrated a high energy density of 51.0 W h kg⁻¹ at a power density of 650.3 W kg⁻¹. It is noteworthy that the ASC offered robust flexibility and excellent performance that was maintained when the devices were bent at various angles. The results indicate that the as-prepared materials could potentially be applied in high-performance electrochemical capacitors.

Ni–Co–S@graphene composites, derived from a metallocene/MOF precursor, presents high energy density and excellent cycling stability.     

Facile hydrothermal synthesis of ternary Ni–Co–Se/carbon nanotube nanocomposites as advanced electrodes for lithium storage

Ternary Ni–Co–Se/carbon nanotube nanocomposites have been successfully prepared via a one-step hydrothermal strategy. When used as electrode materials for lithium-ion batteries, the Ni–Co–Se/CNT composite exhibits good lithium storage performances including excellent cycling stability and outstanding specific capacity, good cycling stability, and high initial coulombic efficiency. A high specific capacity of 687.8 mA h g⁻¹ after 100 charge–discharge cycles at a current density of 0.5 A g⁻¹ with high cycling stability is achieved. The excellent battery performance of Ni–Co–Se/CNT should be attributed to the synergistic effect of Ni and Co ions and the formed network structure.

A Ni–Co–Se/CNT composite exhibits outstanding Li-ion storage performance with respect to high reversible Li-storage capacity, high cyclability and high rate performance.     

A nickel nanoparticle engineered CoFe2O4/SiO2–NH2@carboxamide composite as a novel scaffold for the oxidation of sulfides and oxidative coupling of thiols

The purpose of this work was to prepare a new Ni–carboxamide complex supported on CoFe₂O₄ nanoparticles (CoFe₂O₄/SiO₂–NH₂@carboxamide–Ni). The carboxamide host material unit generated cavities that stabilized the nickel nanoparticles effectively and prevented the aggregation and separation of these particles on the surface. This compound was appropriately characterized using FT-IR spectroscopy, FE-SEM, ICP-OES, EDX, XRD, TGA analysis, VSM, and X-ray atomic mapping. The catalytic oxidation of sulfides and oxidative coupling of thiols in the presence of the designed catalyst was explored as a highly selective catalyst using hydrogen peroxide (H₂O₂) as a green oxidant. The easy separation, simple workup, excellent stability of the nanocatalyst, short reaction times, non-explosive materials as well as appropriate yields of the products are some outstanding advantages of this protocol.

The preparation of a Ni–carboxamide complex supported on CoFe₂O₄ for the oxidation of sulfides and oxidative coupling of thiols.     

Facile construction of a flexible and wearable electrode based on the hierarchical structure of RGO-coated cotton fabric with amorphous Co–Ni–B alloy

As an emerging energy storage material, amorphous Co–Ni–B alloy was firstly introduced to construct the flexible supercapacitor electrode. To ensure the high electrochemical property, amorphous Co–Ni–B alloy and RGO sheets were combined to form the three-dimensional hierarchical structure on the surface of the cotton fabric, which was beneficial to enhance the electrochemical property. Notably, the preparation conditions of this amorphous Co–Ni–B/RGO/fabric electrode were facile and mild with room temperature and atmospheric pressure, thus avoiding serious damage to the textile fabric because of high temperature and harsh chemical reactions of most preparation methods. This flexible electrode exhibited an optimum specific capacitance of 313.9 F g⁻¹ at 5 mV s⁻¹ and good cycling stability with specific capacitance retention of 85.0% after 3000 cycles. Such special architecture bestowed this electrode with nice electrochemical property, in addition to great promising application in the supercapacitor field.

Schematic diagram of preparation process of amorphous Co–Ni–B/RGO/cotton fabric flexible electrode.     

Hierarchical Ni–Co–Mn hydroxide hollow architectures as high-performance electrodes for electrochemical energy storage

In this study, hierarchical Ni–Co–Mn hydroxide hollow architectures were successfully achieved via an etching process. We first performed the synthesis of NiCoMn-glycerate solid spheres via a solvothermal route, and then NiCoMn-glycerate as the template was etched to convert into hierarchical Ni–Co–Mn hydroxide hollow architectures in the mixed solvents of water and 1-methyl-2-pyrrolidone. Hollow architectures and high surface area enabled Ni–Co–Mn hydroxide to manifest a specific capacitance of 1626 F g⁻¹ at 3.0 A g⁻¹, and it remained as large as 1380 F g⁻¹ even at 3.0 A g⁻¹. The Ni–Co–Mn hydroxide electrodes also displayed notable cycle performance with a decline of 1.6% over 5000 cycles at 12 A g⁻¹. Moreover, an asymmetric supercapacitor assembled with this electrode exhibited an energy density of 44.4 W h kg⁻¹ at 1650 W kg⁻¹ and 28.5 W h kg⁻¹ at 12 374 W kg⁻¹. These attractive results demonstrate that hierarchical Ni–Co–Mn hydroxide hollow architectures have broad application prospects in supercapacitors.

An effective etching method is developed for the synthesis of hierarchical Ni–Co–Mn hydroxide hollow architectures, which exhibit high performance in electrochemical energy storage.     

A direct-write method for preparing a bimetal sulfide/graphene composite as a free-standing electrode for high-performance microsupercapacitors

It is a great challenge to ideally integrate graphene with its unique two-dimensional (2D) and porous structure into the pseudocapacitive materials. In this paper, a simple technique, i.e. direct-laser-writing (DLW), was developed to fabricate microsupercapacitors (MSCs) with excellent electrochemical performance, marked as Ni–Co–S/laser induced graphene (LIG) that exhibit a high areal specific capacitance of 680 mF cm⁻² at the current density of 1 mA cm⁻². A symmetric MSC device was assembled using Ni–Co–S/LIG as a positive electrode and active carbon (AC) as the negative electrode, and exhibited a high areal energy density of 56.9 μW h cm⁻² at the power density of 800 μW cm⁻², and excellent cycling stability maintaining 89.6% of the areal specific capacitance after 8000 cycles. The synergistic effect of bimetallic Ni–Co–S and the LIG with the 2D structure results in the excellent electrochemical performance. This work demonstrates a method to integrate Ni–Co–S pseudocapacitive materials into porous graphene with a direct-laser-writing technique. The produced integrated materials possess high energy density that can be used in MSCs.

This work demonstrates a method to integrate Ni–Co–S pseudocapacitive materials into the porous graphene producing from direct-laser-writing technique.