Phosphorus pentoxide as a cost-effective,metal-free catalyst for ring opening polymerization of ε-caprolactone

The ring-opening polymerization (ROP) of ε-caprolactone (ε-CL) using phosphorus pentoxide (P₂O₅) as a metal-free catalyst and isopropanol (iPrOH) as initiator resulted in the preparation of poly(ε-caprolactone) with narrow weight distribution. NMR spectroscopy analyses of the prepared PCL indicated the presence of the initiator residue at the end of the polymer chain, implying the occurrence of the ε-CL-catalysis ROP through a monomer activation mechanism. Kinetic experiments confirmed the controlled/living nature of ε-CL ring-opening catalyzed by phosphorus pentoxide. The commercial availability of phosphorus pentoxide and its easy-handling provide additional opportunities for polymer synthesis and nanocomposite manufacturing.

The ring-opening polymerization (ROP) of ε-caprolactone (ε-CL) using phosphorus pentoxide (P₂O₅) as a metal-free catalyst and isopropanol (iPrOH) as initiator resulted in the preparation of poly(ε-caprolactone) with narrow weight distribution.     

Magnetic hyperthermia with ε-Fe2O3 nanoparticles

Biocompatibility restrictions have limited the use of magnetic nanoparticles for magnetic hyperthermia therapy to iron oxides, namely magnetite (Fe₃O₄) and maghemite (γ-Fe₂O₃). However, there is yet another magnetic iron oxide phase that has not been considered so far, in spite of its unique magnetic properties: ε-Fe₂O₃. Indeed, whereas Fe₃O₄ and γ-Fe₂O₃ have a relatively low magnetic coercivity, ε-Fe₂O₃ exhibits a giant coercivity. In this report, the heating power of ε-Fe₂O₃ nanoparticles in comparison with γ-Fe₂O₃ nanoparticles of similar size (∼20 nm) was measured in a wide range of field frequencies and amplitudes, in uncoated and polymer-coated samples. It was found that ε-Fe₂O₃ nanoparticles primarily heat in the low-frequency regime (20–100 kHz) in media whose viscosity is similar to that of cell cytoplasm. In contrast, γ-Fe₂O₃ nanoparticles heat more effectively in the high frequency range (400–900 kHz). Cell culture experiments exhibited no toxicity in a wide range of nanoparticle concentrations and a high internalization rate. In conclusion, the performance of ε-Fe₂O₃ nanoparticles is slightly inferior to that of γ-Fe₂O₃ nanoparticles in human magnetic hyperthermia applications. However, these ε-Fe₂O₃ nanoparticles open the way for switchable magnetic heating owing to their distinct response to frequency.

ε-Fe₂O₃ is a magnetic iron(iii) oxide with a giant coercivity. Its potential in hyperthermia applications has been evaluated in comparison with γ-Fe₂O₃ over a wide range of field frequencies and amplitudes.     

Crystal growth control of rod-shaped ε-Fe2O3 nanocrystals

Herein we report crystal growth control of rod-shaped ε-Fe₂O₃ nanocrystals by developing a synthesis based on the sol–gel technique using β-FeO(OH) as a seed in the presence of a barium cation. ε-Fe₂O₃ nanocrystals are obtained over a wide calcination temperature range between 800 °C and 1000 °C. A low calcination temperature (800 °C) provides an almost cubic rectangular-shaped ε-Fe₂O₃ nanocrystal with an aspect ratio of 1.4, whereas a high calcination temperature (1000 °C) provides an elongated rod-shaped ε-Fe₂O₃ nanocrystal with an aspect ratio of 3.3. Such systematic anisotropic growth of ε-Fe₂O₃ is achieved due to the wide calcination temperature in the presence of barium cations. The surface energy and the anisotropic adsorption of barium on the surface of ε-Fe₂O₃ can explain the anisotropic crystal growth of rod-shaped ε-Fe₂O₃ along the crystallographic a-axis. The present work may provide important knowledge about how to control the anisotropic crystal shape of nanomaterials.

Crystal growth control of rod-shaped ε-Fe₂O₃ nanocrystals is achieved by a synthesis based on the sol–gel technique.     

CNT modified layered α-MnO2 hybrid flame retardants: preparation and their performance in the flame retardancy of epoxy resins

In this paper, CNT modified layered α-MnO₂ hybrid flame retardants (α-MnO₂–CNTs) were synthesized through one-pot preparation. The structure and composition of the α-MnO₂–CNTs hybrid flame retardants were investigated by X-ray diffraction, TEM and SEM. Subsequently, the α-MnO₂–CNTs hybrids were then incorporated into epoxy resin (EP) to improve the fire safety properties. Compared with pure EP and the composites with CNTs or α-MnO₂, EP/α-MnO₂–CNTs composites exhibited improved flame retardancy and smoke suppression properties. With the incorporation of only 2.0 wt% of α-MnO₂–CNTs hybrid flame retardants, the peak heat release rate and total heat release of the composites showed 34% and 10.7% reduction respectively. In addition, the volatile gases such as CO and CO₂ were reduced and the smoke generation was also effectively inhibited. The improved fire safety of the composites is generally due to the network structures and the synergistic effect of α-MnO₂ and CNTs, the catalyzing charring effect, smoke suppression and the physical barrier effect of α-MnO₂ nanosheets.

In this paper, CNT modified layered α-MnO₂ hybrid flame retardants (α-MnO₂–CNTs) were synthesized through one-pot preparation.     

Highly efficient reduction of 4-nitrophenolate to 4-aminophenolate by Au/γ-Fe2O3@HAP magnetic composites

In this article, the catalyst Au/γ-Fe₂O₃@hydroxyapatite (Au/γ-Fe₂O₃@HAP) consisting of Au nanoparticles supported on the core–shell structure γ-Fe₂O₃@HAP was prepared through a deposition–precipitation method. The catalyst was characterized by transmission electron microscopy, X-ray powder diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, N₂ adsorption–desorption and atomic absorption spectrometry. The as-prepared Au/γ-Fe₂O₃@HAP exhibited excellent performance for the reduction of 4-nitrophenolate (4-NP) to 4-aminophenolate (4-AP) in the presence of NaBH₄ at room temperature. Thermodynamic and kinetic data on the reduction of 4-NP to 4-AP catalyzed by the as-prepared catalyst were studied. The as-prepared catalyst could be easily separated by a magnet and recycled 6 times with over 92% conversion of 4-NP to 4-AP. In addition, the as-prepared catalyst showed excellent catalytic performance on other nitrophenolates. The TOF value of this work on the reduction of 4-NP to 4-AP was 241.3 h⁻¹. Au/γ-Fe₂O₃@HAP might have a promising potential application on the production of 4-AP and its derivatives.

In this article, the catalyst Au/γ-Fe₂O₃@hydroxyapatite (Au/γ-Fe₂O₃@HAP) consisting of Au nanoparticles supported on the core–shell structure γ-Fe₂O₃@HAP was prepared through a deposition–precipitation method.     

DFT study on the electronic structure and optical properties of an Au-deposited α-Fe2O3 (001) surface

The electronic structure and optical properties of gold clusters deposited on an α-Fe₂O₃ surface were studied by using density functional theory (DFT), with a special emphasis on the influence of Au cluster sizes. There is a strong interaction between Au clusters and the α-Fe₂O₃ surface, and the binding energy increases with an increase of Au cluster size. The Au atoms of the gold cluster are bonded to the iron atoms of the α-Fe₂O₃ surface for the Au/α-Fe₂O₃ system, and the electrons transfer from the Au cluster to the α-Fe₂O₃ surface with the largest number of electrons transferred for 4Au/α-Fe₂O₃. The peaks of the refractive index, extinction coefficient and dielectric function induced by Au clusters appear in the visible range, which results in the enhanced optical absorption for the Au/α-Fe₂O₃ system. The optical absorption intensifies with increasing Au cluster size in the visible range, showing a maximum value for 4Au/α-Fe₂O₃. Further increasing the Au cluster size above 4Au results in a decrease in absorption intensity. The results are in good agreement with those of the refractive index, extinction coefficient and dielectric function.

The electronic structure and optical properties of gold clusters deposited on an α-Fe₂O₃ surface were studied by using density functional theory (DFT), with a special emphasis on the influence of Au cluster sizes.     

Photocatalytic degradation of ethylene by Ga2O3 polymorphs

In this work, we fabricated four different Ga₂O₃ polymorphs, namely, α-, β-, γ-, δ-Ga₂O_3, and investigated their photocatalytic activities by the degradation of ethylene under ultraviolet (UV) light irradiation. Owing to the more positive valence band, all these Ga₂O₃ polymorphs are more photocatalytic reactive than P25 during the degradation of ethylene. The normalized photocatalytic ethylene degradation rate constants of the as-prepared Ga₂O₃ polymorphs follow the order: α-Ga₂O₃ > β-Ga₂O₃ > γ-Ga₂O₃ > δ-Ga₂O₃, which is mainly determined by the position of VBM and the crystallinity of the samples. Among these Ga₂O₃ polymorphs, γ-Ga₂O₃, with the highest surface area, exhibits the highest activity during photocatalytic ethylene degradation, and the degradation rate constant is almost 10 times as that of P25. Furthermore, with the most positive CBM, γ-Ga₂O₃ produces the least CO. These attributes are beneficial for ethylene degradation during post-harvest storage of fruits and vegetables, which makes γ-Ga₂O₃ a potential candidate for practical photocatalytic ethylene degradations.

In this work, we fabricated four different Ga₂O₃ polymorphs, namely, α-, β-, γ-, δ-Ga₂O_3, and investigated their photocatalytic activities by the degradation of ethylene under ultraviolet (UV) light irradiation.     

α-Fe2O3 hollow meso–microspheres grown on graphene sheets function as a promising counter electrode in dye-sensitized solar cells

Although nanoparticles, nanorods, and nanosheets of α-Fe₂O₃ on graphene sheets have been synthesized, it remains a challenge to grow 3D α-Fe₂O₃ nanomaterials with more sophisticated compositions and structures on the graphene sheets. Herein, we demonstrate a facile solvothermal route under controlled conditions to successfully fabricate 3D α-Fe₂O₃ hollow meso–microspheres on the graphene sheets (α-Fe₂O₃/RGO HMM). Attributed to the combination of the catalytic features of α-Fe₂O₃ hollow meso–microspheres and the high conductivity of graphene, α-Fe₂O₃/RGO HMM exhibited promising electrocatalytic performance as a counter electrode in dye-sensitized solar cells (DSSCs). The DSSCs fabricated with α-Fe₂O₃ HMM displayed high power conversion efficiency of 7.28%, which is comparable with that of Pt (7.71%).

Although nanoparticles, nanorods, and nanosheets of α-Fe₂O₃ on graphene sheets have been synthesized, it remains a challenge to grow 3D α-Fe₂O₃ nanomaterials with more sophisticated compositions and structures on the graphene sheets.     

Heterostructures of ε-Fe2O3 and α-Fe2O3: insights from density functional theory

Many materials used in energy devices or applications suffer from the problem of electron–hole pair recombination. One promising way to overcome this problem is the use of heterostructures in place of a single material. If an electric dipole forms at the interface, such a structure can lead to a more efficient electron–hole pair separation and thus prevent recombination. Here we model and study a heterostructure comprised of two polymorphs of Fe₂O₃. Each one of the two polymorphs, α-Fe₂O₃ and ε-Fe₂O₃, individually shows promise for applications in photoelectrochemical cells. The heterostructure of these two materials is modeled by means of density functional theory. We consider both ferromagnetic as well as anti-ferromagnetic couplings at the interface between the two systems. Both individual oxides are insulating in nature and have an anti-ferromagnetic spin arrangement in their ground state. The same properties are found also in their heterostructure. The highest occupied electronic orbitals of the combined system are localized at the interface between the two iron-oxides. The localization of charges at the interface is characterized by electrons residing close to the oxygen atoms of ε-Fe₂O₃ and electron–holes localized on the iron atoms of α-Fe₂O₃, just around the interface. The band alignment at the interface of the two oxides shows a type-III broken band-gap heterostructure. The band edges of α-Fe₂O₃ are higher in energy than those of ε-Fe₂O₃. This band alignment favours a spontaneous transfer of excited photo-electrons from the conduction band of α- to the conduction band of ε-Fe₂O₃. Similarly, photo-generated holes are transferred from the valence band of ε- to the valence band of α-Fe₂O₃. Thus, the interface favours a spontaneous separation of electrons and holes in space. The conduction band of ε-Fe₂O₃, lying close to the valence band of α-Fe₂O₃, can result in band-to-band tunneling of electrons which is a characteristic property of such type-III broken band-gap heterostructures and has potential applications in tunnel field-effect transistors.

Electron–hole pair recombination is reduced in heterostructures if used in devices in place of single material.     

Efficient activation of persulfate by Fe3O4@β-cyclodextrin nanocomposite for removal of bisphenol A

Experimental studies were conducted to investigate the degradation of bisphenol A (BPA) by using persulfate (PS) as the oxidant and Fe₃O₄@β-cyclodextrin (β-CD) nanocomposite as a heterogeneous activator. The catalytic activity was evaluated in consideration of the effect of various parameters, such as pH value, PS concentration and Fe₃O₄@β-CD load. The results showed that 100% removal of BPA was gained at pH 3.0 with 5 mM PS, 1.0 g L⁻¹ Fe₃O₄@β-CD, and 0.1 mM BPA in 120 min. Further, the catalytic activity of Fe₃O₄@β-CD nanocomposite was observed as much higher when compared with Fe₃O₄ nanoparticles alone. The sulfate and hydroxyl radicals referred to in the Fe₃O₄@β-CD/PS system were determined as the reactive species responsible for the degradation of BPA by radical quenching and electron spin resonance (ESR) tests. In addition, the catalyst also possessed with accepted reusability and stability. On the basis of the results of the effect of chloride ions (Cl⁻), β-CD was found to play a crucial role in reducing interference from Cl⁻ ions, and lead to achieve higher removal efficiency for BPA in Fe₃O₄@β-CD/PS system. A possible mechanistic process of BPA degradation was proposed according to the identified intermediates by gas chromatography-mass spectroscopy (GC-MS).

Persulfate (PS), the most commonly used activator for in situ chemical oxidation (ISCO), could couple with Fe₃O₄@β-CD for effectively degrading BPA.     

Ab initio investigation of electronic structure and optical properties of IrSn4

We have examined the electronic structure and optical properties of intermetallic IrSn₄ for three polymorphic modifications, α-IrSn₄, β-IrSn₄, and γ-IrSn₄, utilizing the first-principles PAW-PBEsol-GGA and FP-LAPW-LSDA methods. The obtained electronic structure data reveal clear-cut differences between α-IrSn₄ and the remaining morphs. This observation may be used to explain the appearance of superconductivity in β-IrSn₄, and also provides reasonable grounds to suspect eventual superconductivity in γ-IrSn₄. Therefore, it is highly desirable to carry out extended measurements on γ-IrSn₄ at lower temperatures.

The ELF isosurfaces cutting along the 110 planes of β-IrSn₄ reveal the high anisotropic distributions of electrons with the itinerant character of Ir-5d and highly localized properties of Sn-5p electrons.     

Defect structure in δ-Bi5PbY2O11.5

A detailed study of the defect structure in a di-substituted δ-Bi₂O₃ type phase, δ-Bi₅PbY₂O_11.5, is presented. Using a combination of conventional Rietveld analysis of neutron diffraction data, reverse Monte Carlo (RMC) analysis of total neutron scattering data and ab initio molecular dynamics (MD) simulations, both average and local structures have been characterized. δ-Bi₅PbY₂O_11.5 represents a model system for the highly conducting δ-Bi₂O₃ type phases, in which there is a higher nominal vacancy concentration than in the unsubstituted parent compound. Uniquely, the methodology developed in this study has afforded the opportunity to study both oxide-ion vacancy ordering as well as specific cation–cation interactions. Oxide-ion vacancies in this system have been found to show a preference for association with Pb²⁺ cations, with some evidence for clustering of these cations. The system shows a non-random distribution of vacancy pair alignments, with a preference for 〈100〉 ordering, the extent of which shows thermal variation. MD simulations indicate a predominance of oxide-ion jumps in the 〈100〉 direction.

Total neutron scattering analysis and ab initio MD simulations reveal details of oxide ion vacancy ordering and migration pathways.     

Novel magnetic g-C3N4/α-Fe2O3/Fe3O4 composite for the very effective visible-light-Fenton degradation of Orange II

A novel magnetic heterogeneous g-C₃N₄/α-Fe₂O₃/Fe₃O₄ catalyst was successfully synthesized through a simple hydrothermal method. The structure, morphology, and optical properties of the catalyst were characterized. The photocatalytic activity of the heterogeneous g-C₃N₄/α-Fe₂O₃/Fe₃O₄ catalyst for the photo-Fenton degradation of Orange II in the presence of H₂O₂ irradiated with visible light (λ > 420 nm) at neutral pH was evaluated. The g-C₃N₄/α-Fe₂O₃/Fe₃O₄ photocatalyst was found to be an excellent catalyst for the degradation of Orange II and offers great advantages over the traditional Fenton system (Fe(ii/iii)/H₂O₂). The results indicated that successfully combining monodispersed Fe₃O₄ nanoparticles and g-C₃N₄/α-Fe₂O₃ enhanced light harvesting, retarded photogenerated electron–hole recombination, and significantly enhanced the photocatalytic activity of the system. The g-C₃N₄/α-Fe₂O₃/Fe₃O₄ (30%) sample gave the highest degradation rate constant, 0.091 min⁻¹, which was almost 4.01 times higher than the degradation rate constant for α-Fe₂O₃ and 2.65 times higher than the degradation rate constant for g-C₃N₄/α-Fe₂O₃ under the same conditions. A reasonable mechanism for catalysis by the g-C₃N₄/α-Fe₂O₃/Fe₃O₄ composite was developed. The g-C₃N₄/α-Fe₂O₃/Fe₃O₄ composite was found to be stable and recyclable, meaning it has great potential for use as a photo-Fenton catalyst for effectively degrading organic pollutants in wastewater.

A novel magnetic heterogeneous g-C₃N₄/α-Fe₂O₃/Fe₃O₄ catalyst was firstly synthesized and exhibited very effective visible-light-Fenton degradation of Orange II at neutral pH.     

Mesoporous anodic α-Fe2O3 interferometer for organic vapor sensing application

In this work, we reported the utilization of mesoporous α-Fe₂O₃ films as optical sensors for detecting organic vapors. The mesoporous α-Fe₂O₃ thin films, which exhibited obvious Fabry–Perot interference fringes in the reflectance spectrum, were successfully fabricated through electrochemical anodization of Fe foils. Through monitoring the optical thickness of the interference fringes, three typical organic species with different vapor pressures and polarities (hexane, acetone and isopropanol) were applied as probes to evaluate the sensitivity of the α-Fe₂O₃ based interferometric sensor. The experiment results showed that the as-synthesized mesoporous α-Fe₂O₃ interferometer displayed high reversibility and stability for the three organic vapors, and were especially sensitive to isopropanol, with a detection limit of about 65 ppmv. Moreover, the photocatalytic properties of α-Fe₂O₃ under visible light are beneficial for degradation of dodecane vapor residues in the nano-pores and refreshment of the sensor, demonstrating good self-cleaning properties of the α-Fe₂O₃-based interferometric sensor.

Mesoporous α-Fe₂O₃ interferometers with well-resolved optical fringes can display high sensitivity to organic vapors.     

The hydrothermal processing of iron oxides from bacterial biofilm waste as new nanomaterials for broad applications

Iron oxides and their hydroxides have been studied and analysed with properties of their mutual transformations under different hydrothermal conditions being indicated. Amorphous bacteria nanowires produced from biofilm waste were investigated under the influence of pH at a fixed duration (20 h) and reaction temperature (200 °C). The morphology, structure, and particle size of the transformation of hematite (α-Fe₂O₃) was obtained and characterised with SEM, XRD, FTIR, and particle sizer. The optimal conditions for the complete conversion of amorphous iron oxide nanowires to crystalline α-Fe₂O₃ is under acidic conditions where the pH is 1. The flower-like α-Fe₂O₃ structures have photocatalytic activity and adsorbent properties for heavy metal ions. This one-pot synthesis approach to produce α-Fe₂O₃ at a low cost would be greatly applicable to the recycling process of biofilm waste in order to benefit the environment.

Large production of crystalline, nanoflower hematite can be achieved under hydrothermal conditions from bacterial biofilm waste.     

d-Glucose sensor based on ZnO·V2O5 NRs by an enzyme-free electrochemical approach

A simple wet-chemical technique was used to prepare zinc oxide-doped vanadium pentaoxide nanorods (ZnO·V₂O₅ NRs) in an alkaline environment. The synthesized ZnO·V₂O₅ NRs were characterized using typical methods, including UV-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (XEDS), X-ray photoelectron spectroscopy (XPS), and X-ray powder diffraction (XRD). The d-glucose (d-GLC) sensor was fabricated with modification of a slight coating of nanorods (NRs) onto a flat glassy carbon electrode (GCE). The analytical performances, such as the sensitivity, limit of quantification (LOQ), limit of detection (LOD), linear dynamic range (LDR), and durability, of the proposed d-GLC sensor were acquired by a dependable current–voltage (I–V) process. A calibration curve of the GCE/ZnO·V₂O₅ NRs/Nf sensor was plotted at +1.0 V over a broad range of d-GLC concentrations (100.0 pM–100.0 mM) and found to be linear (R² = 0.6974). The sensitivity (1.27 × 10⁻³ μA μM⁻¹ cm⁻²), LOQ (417.5 mM), and LOD (125 250 μM) were calculated from the calibration curve. The LDR (1.0 μM–1000 μM) was derived from the calibration plot and was also found to be linear (R² = 0.9492). The preparation of ZnO·V₂O₅ NRs by a wet-chemical technique is a good advancement for the expansion of nanomaterial-based sensors to support enzyme-free sensing of biomolecules in healthcare fields. This fabricated GCE/ZnO·V₂O₅ NRs/Nf sensor was used for the recognition of d-glucose in real samples (apple juice, human serum, and urine) and returned satisfactory and rational outcomes.

A simple wet-chemical technique was used to prepare zinc oxide-doped vanadium pentaoxide nanorods (ZnO·V₂O₅ NRs) in an alkaline environment.     

Microwave dielectric properties of low-temperature-fired MgNb2O6 ceramics for LTCC applications

MgNb₂O₆ ceramics doped with (Li₂O–MgO–ZnO–B₂O₃–SiO₂) glass were synthesized by the traditional solid phase reaction route. The effects of LMZBS addition on microwave dielectric properties, grain growth, phase composition and morphology of MgNb₂O₆ ceramics were studied. The SEM results show dense and homogeneous microstructure with grain size of 1.72 μm. Raman spectra and XRD patterns indicate the pure phase MgNb₂O₆ ceramic. The experimental results show that LMZBS glass can markedly decrease the sintering temperature from 1300 °C to 925 °C. Higher density and lower porosity make ceramics have better dielectric properties. The MgNb₂O₆ ceramic doped with 1 wt% LMZBS glass sintered at 925 °C for 5 h, possessed excellent dielectric properties: ε_r = 19.7, Q·f = 67 839 GHz, τ_f = −41.01 ppm °C⁻¹. Moreover, the favorable chemical compatibility of the MgNb₂O₆ ceramic with silver electrodes makes it as promising material for low temperature co-fired ceramic (LTCC) applications.

MgNb₂O₆ ceramics doped with (Li₂O–MgO–ZnO–B₂O₃–SiO₂) glass were synthesized by the traditional solid phase reaction route.     

Efficient electrocatalyst of α-Fe2O3 nanorings for oxygen evolution reaction in acidic conditions

Large-scale application of sustainable energy devices urgently requires cost-effective electrocatalysts to overcome the sluggish kinetics related to the oxygen evolution reaction (OER) under acidic conditions. Here, we first report the highly efficient electrocatalytic characteristics of α-Fe₂O₃ nanorings (NRs), which exhibits prominent OER electrocatalytic activity with lower overpotential of 1.43 V at 10 mA cm⁻² and great stability in 1 M HCl, surpassing the start-of-the art Ir/C electrocatalyst. The significantly optimized OER activity of the α-Fe₂O₃ NRs mainly attributes to the synergistic effect of the excellent electrical conductivity and a large effective active surface because of their unique nanoring structure, disordered surface, and the dynamic stability of α-Fe₂O₃ NRs in acidic conditions.

α-Fe₂O₃ NRs is obtained for OER with lower small overpotential and great stability in 1 M HCl, surpassing Ir/C electrocatalyst.     

Disodium citrate-assisted hydrothermal synthesis of V2O5 nanowires for high performance supercapacitors

Orthorhombic vanadium pentoxide (V₂O₅) nanowires with uniform morphology were successfully fabricated via a facile hydrothermal process. The effect of disodium citrate dosage on the crystallinity, morphology and electrochemical properties of the products was analyzed. Experimental results indicate that orthorhombic V₂O₅ nanowires with high crystallinity and diameter of about 20 nm can be obtained at 180 °C for 24 h when the dosage of disodium citrate is 0.236 g. Furthermore, the prepared V₂O₅ nanowires demonstrate a high specific capacitance of 528.2 F g⁻¹ at 0.5 A g⁻¹ and capacitance retention of 85% after 1000 galvanostatic charge/discharge cycles at 1 A g⁻¹ when used as supercapacitors electrode in 0.5 M K₂SO₄.

Orthorhombic vanadium pentoxide (V₂O₅) nanowires with uniform morphology were successfully fabricated via a facile hydrothermal process.     

The production of an efficient visible light photocatalyst for CO oxidation through the surface plasmonic effect of Ag nanoparticles on SiO2@α-Fe2O3 nanocomposites

A process for the photo deposition of noble Ag nanoparticles on a core–shell structure of SiO₂@α-Fe₂O₃ nanocomposite spheres was performed to produce a CO photo oxidation catalyst. The structural analyses were carried out for samples produced using different Ag metal nanoparticle weight percentages on SiO₂@α-Fe₂O₃ nanocomposite spheres by X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), UV-vis spectroscopy, Raman spectroscopy and Fourier transform infrared spectroscopy (FTIR). A computational study was also performed to confirm the existence of the synergic effect of surface plasmon resonance (SPR) for different weight percentages of Ag on the SiO₂@α-Fe₂O₃ nanocomposites. The mechanism for CO oxidation on the catalyst was explored using diffuse reflectance infrared Fourier transform spectroscopy (DRFIT). The CO oxidation results for the Ag (2 wt%)-SiO₂@α-Fe₂O₃ nanocomposite spheres showed 48% higher photocatalytic activity than α-Fe₂O₃ and SiO₂@α-Fe₂O₃ at stable temperature.

We present a systematic investigation of CO oxidation and surface plasmon resonance on SiO₂@α-Fe₂O₃ nanocomposite spheres with different weight percentages of Ag nanoparticles.