High Tm linear poly(l-lactide)s prepared via alcohol-initiated ROPs of l-lactide

Alcohol-initiated ROPs of l-lactide were performed in bulk at 160 °C for 72 h with variation of the catalyst or with variation of the initiator (aliphatic alcohols). Spontaneous crystallization was only observed when cyclic Sn(ii) compounds were used as a catalyst. Regardless of initiator, high melting crystallites with melting temperatures (T_m) of 189–193 °C were obtained in almost all experiments with Sn(ii) 2,2′-dioxybiphenyl (SnBiph) as catalyst, even when the time was shortened to 24 h. These HT_m poly(lactide)s represent the thermodynamically most stable form of poly(l-lactide). Regardless of the reaction conditions, such high melting crystallites were never obtained when Sn(ii) 2-ethylhexanoate (SnOct₂) was used as catalyst. SAXS measurements evidenced that formation of HT_m poly(l-lactide) involves growth of the crystallite thickness, but chemical modification of the crystallite surface (smoothing) seems to be of greater importance. A hypothesis, why the “surface smoothing” is more effective for crystallites of linear chains than for crystallites composed of cycles is discussed.

By variation of reaction conditions and catalysts a cyclic tin(ii) compound was found, which enables synthesis of high melting (>190 °C) poly(l-lactide) via ROP of l-lactide, whereas the technically used catalyst SnOct₂ does not show such a performance.     

Effect of molecular weight of polyethylene glycol on crystallization behaviors,thermal properties and tensile performance of polylactic acid stereocomplexes

In this work, the poly(d-lactic acid)–polyethylene glycol–poly(d-lactic acid) (PDLA–PEG–PDLA) triblock copolymer as a novel modification agent was incorporated into poly(l-lactic acid) (PLLA) to improve the thermal and mechanical properties of PLLA. The influences of molecular weight of PEG in the triblock copolymer on the structure, crystallization behaviors, heat resistance and tensile properties of PDLA–PEG–PDLA/PLLA blends were investigated by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), differential scanning calorimetry (DSC), polarized optical microscopy (POM), thermogravimetric analysis (TGA) and tensile testing. The results from FTIR, XRD and DSC confirm the formation of a polylactide stereocomplex in the PLLA blends. The structure and properties of the stereocomplex crystals are different from those of pure PLLA. The melting temperature (T_m) of the stereocrystal is near 200 °C, which is significantly higher than that of the homogeneous crystal of PLLA. The effect of molecular weight of PEG on the crystal morphology of PLLA blends is also obvious. The improvement of tensile properties for PLLA blends is attributed to the crystal morphological features, which will potentially enhance the utility of the PLLA based polymer.

In this work, the poly(d-lactic acid)–polyethylene glycol–poly(d-lactic acid) (PDLA–PEG–PDLA) triblock copolymer as a novel modification agent was incorporated into poly(l-lactic acid) (PLLA) to improve the thermal and mechanical properties of PLLA.     

Magnetic-propelled Fe3O4–chitosan carriers enhance l-asparaginase catalytic activity: a promising strategy for enzyme immobilization

Magnetic-propelled carriers comprising magnetic Fe₃O₄–chitosan nanoparticles were immobilized with l-asparaginase (l-ASNase). The enzyme displayed enhanced catalytic activity in a weak magnetic field, and thermal and pH stabilities. The conjugated l-ASNase presented higher thermostability and wider range of pH stability in comparison with those of free l-ASNase. Moreover, the reusability of conjugated l-ASNase significantly improved after immobilization and it retained 60.5% of its initial activity after undergoing 16 cycles. The conjugated l-ASNase maintained more than 50% and 48% initial activity after 4 weeks of storage at 4 °C and room temperature, respectively. Furthermore, we reveal that the activity of conjugated l-ASNase onto magnetic Fe₃O₄–chitosan particles increased by about 3-fold in the weak magnetic field at certain frequencies and flux density compared with that of free l-ASNase. Considering these excellent attributes, the magnetic-propelled mechanism in the transporting and activation of l-ASNase can be used by enhancing the catalytic activity, stability, and efficiency in vital implications for medicinal biotechnology.

A magnetic-propelled carrier comprising chitosan-coated Fe₃O₄ nanoparticles was prepared to enhance the catalytic activity of immobilized l-asparaginase in a weak magnetic field.     

Remarkable diastereomeric effect on thermoresponsive behavior of polyurethane based on lysine and tartrate ester derivatives

This study describes the long-distance diastereomeric effect on thermoresponsive properties in water-soluble diastereomeric polyurethanes (PUs) composed of an l-lysine ethyl ester diisocyanate and a trimethylene glycol l-/d-tartrate ester, which have differences in spatial arrangements of the ethyl esters in the mirror image. The PUs based on l-lysine and l-/d-tartrate ester, named l-PU and d-PU, were synthesized with various number average molecular weights from 4700 to 13 100. In turbidimetry, l-PU showed a steep phase transition from 100%T to 0%T within about 10 °C at 4 g L⁻¹, whereas d-PU did not change completely to 0%T transmittance even at 80 °C at 4 g L⁻¹. In addition, the thermoresponsive properties of l-PU were less affected by concentration than those of d-PU. This long-distance diastereomeric effect on thermoresponsive behavior between l-PU and d-PU appeared in common among 6 samples with 4700 to 13 100 number average molecular weight. In the dynamic light scattering experiments at each transmittance, the hydrodynamic diameter (D_h) of l-PU increased up to 1000 nm, while the D_h of d-PU remained almost at 200–300 nm. The C O stretching vibration of FT-IR spectra showed that d-PU has more hydrogen-bonded ester groups than L-PU. Thus, we speculated that the difference in the retention of polymer chains in the micelle to promote intermicellar bridging generates the long-distance diastereomeric effect.

The long-distance diastereomeric effect on thermoresponsive properties in a polyurethane system consisting of chiral monomers was reported.     

Simultaneous removal of Sb(iii) and Cd(ii) in water by adsorption onto a MnFe2O4–biochar nanocomposite

In this study, a jacobsite–biochar nanocomposite (MnFe₂O₄–BC) was fabricated and used to simultaneously remove Sb(iii) and Cd(ii) from water via adsorption. The MnFe₂O₄–BC nanocomposite was prepared via a co-precipitation method and analyzed using various techniques. The results confirm the successful decoration of the biochar surface with MnFe₂O₄ nanoparticles. The maximum Sb(iii) removal efficiency was found to be higher from bi-solute solutions containing Cd(ii) than from single-solute systems, suggesting that the presence of Cd(ii) enhances the removal of Sb(iii). The Langmuir isotherm model describes well Sb(iii) and Cd(ii) removal via adsorption onto the MnFe₂O₄–BC nanocomposite. The maximum adsorption capacities are 237.53 and 181.49 mg g⁻¹ for Sb(iii) and Cd(ii), respectively, in a bi-solute system. Thus, the prepared MnFe₂O₄–BC nanocomposite is demonstrated to be a potential adsorbent for simultaneously removing Sb(iii) and Cd(ii) ions from aqueous solutions.

In this study, a jacobsite–biochar nanocomposite (MnFe₂O₄–BC) was fabricated and used to simultaneously remove Sb(iii) and Cd(ii) from water via adsorption.     

Microfluidic synthesis of PLGA/carbon quantum dot microspheres for vascular endothelial growth factor delivery

In this study, vascular endothelial growth factor (VEGF) loaded poly(d,l-lactide-co-glycolide) (PLGA) – carbon quantum dot microspheres were produced using microfluidic platforms. The microcapsules were fabricated in flow-focusing geometry with a biphasic flow to generate solid/oil/water (s–o–w) droplets. To avoid any damage to protein functional and structural stability during the encapsulation process, the VEGF was PEGylated. The produced microspheres were intact and highly monodisperse in size (CV < 5%). Furthermore, microspheres in a size range of 16–36 µm were achieved by adjusting the flow ratio parameter. The encapsulation efficiency, release profile, and bioactivity of the produced microparticles were also studied. The loading efficiency of PEGylated VEGF in the microparticles was varied from 51–69% and more than 90% of PEGylated VEGF was released within 28 days. Furthermore, the release of VEGF was indirectly monitored by carbon quantum dots. The present monodisperse and controllable VEGF loaded microspheres with reproducible manner could be widely used in tissue engineering and therapeutic applications.

In this study, vascular endothelial growth factor (VEGF) loaded poly(d,l-lactide-co-glycolide) (PLGA) – carbon quantum dot microspheres were produced using microfluidic platforms.     

Pu(iii) and Cm(iii) in the presence of EDTA: aqueous speciation,redox behavior,and the impact of Ca(ii)

The impact of calcium on the solubility, redox behavior, and speciation of the An(iii)–EDTA (An = Pu or Cm) system under reducing, anoxic conditions was investigated through batch solubility experiments, X-ray absorption spectroscopy (XAS), density functional theory (DFT), and time-resolved laser fluorescence spectroscopy (TRLFS). Batch solubility experiments were conducted from undersaturation using Pu(OH)₃(am) as the solid phase in contact with 0.1 M NaCl–NaOH–HCl–EDTA–CaCl₂ solutions at [EDTA] = 1 mM, pH_m = 7.5–9.5, and [CaCl₂] ≤20 mM. Additional samples targeted brine systems represented by 3.5 M CaCl₂ and WIPP simulated brine. Solubility data in the absence of calcium were well-described by Pu(iii)–EDTA thermodynamic models, thus supporting the stabilization of Pu(iii)–EDTA complexes in solution. Cm(iii)–EDTA TRLFS data suggested the stepwise hydrolysis of An(iii)-EDTA complexes with increasing pH, and current Pu(iii)-EDTA solubility models were reassessed to evaluate the possibility of including Pu(iii)–OH–EDTA complexes and to calculate preliminary formation constants. Solubility data in the presence of calcium exhibited nearly constant log m(Pu)_tot, as limited by total ligand concentration, with increasing [CaCl₂]_tot, which supports the formation of calcium-stabilized Pu(iii)–EDTA complexes in solution. XAS spectra without calcium showed partial oxidation of Pu(iii) to Pu(iv) in the aqueous phase, while calcium-containing experiments exhibited only Pu(iii), suggesting that Ca–Pu(iii)–EDTA complexes may stabilize Pu(iii) over short timeframes (t ≤45 days). DFT calculations on the Ca–Pu(iii)–EDTA system and TRLFS studies on the analogous Ca–Cm(iii)–EDTA system show that calcium likely stabilizes An(iii)–EDTA complexes but can also potentially stabilize An(iii)–OH–EDTA species in solution. This hints towards the possible existence of four major complex types within Ca–An(iii)–EDTA systems: An(iii)–EDTA, An(iii)–OH–EDTA, Ca–An(iii)–EDTA, and Ca–An(iii)–OH–EDTA. While the exact stoichiometry and degree of ligand protonation within these complexes remain undefined, their formation must be accounted for to properly assess the fate and transport of plutonium under conditions relevant to nuclear waste disposal.

Combined advanced spectroscopy and solubility studies provide evidence for the formation of novel calcium-containing and hydrolyzed (Cm,Pu)(iii)–EDTA complex(es).     

In situ electrochemical investigation of the reaction progress between Zr and a CuCl–SnCl2 mixture in a LiCl–KCl molten salt

The electrochemical behaviors of CuCl, SnCl₂ and a CuCl–SnCl₂ mixture were investigated by cyclic voltammetry (CV) and square wave voltammetry (SWV). The reduction potentials of Cu(i) and Sn(ii) on CV curves are −0.49 and −0.36 V, respectively, while the reduction potentials of Cu(i)–Sn(ii) in the CuCl–SnCl₂ mixture almost overlap. The co-chlorination reaction progress between CuCl–SnCl₂ and Zr was also studied by monitoring the concentration changes of Cu(i), Sn(ii) and Zr(iv) ions in situ by CV, SWV and inductively coupled plasma-atomic emission spectroscopy (ICP-AES) analyses. The results indicate that during the reaction, the concentration of Zr(iv) ions increases gradually, while those of Cu(i) and Sn(ii) decrease rapidly until they disappear. When the molar ratios of Cu(i) to Sn(ii) are 1 : 1 and 1 : 0.5, the reaction between Cu(i) and Zr is faster but cannot exceed twice that of Sn(ii) and Zr in a short time. When the theoretical product of ZrCl₄ is a constant, and with the proportion of CuCl to SnCl₂ decreasing from 1 : 0 to 0 : 1, the chlorination reaction time periods increase from 40 to 170 min. Chloride products such as Cu_xSn_y, Sn_xZr_y, and Cu_xZr_y, are formed with different molar ratios. The coupling effect caused by the formation of alloys will promote the chlorination reaction when the ratios of CuCl to SnCl₂ are 0.66 : 0.17 and 0.5 : 0.25. The results provide a theoretical basis for the electrolytic refinement of zirconium.

A LiCl–KCl–ZrCl₄ melt was prepared via a co-chlorination reaction between a binary mixture of CuCl–SnCl₂ and Zr, and the reaction progress was electrochemically monitored.     

Application of temperature-controlled chiral hybrid structures constructed from copper(ii)-monosubstituted Keggin polyoxoanions and copper(ii)-organoamine complexes in enantioselective sensing of tartaric acid

Temperature usually occupies a crucial position in the construction of chiral compounds. By controlling the temperature of the reaction system, chiral and non-chiral compounds can be designed and synthesized. Given the above, three new chiral and non-chiral compounds based on copper(ii) monosubstituted polyoxoanions and Cu(en) complexes (en = ethylenediamine), d/l-[Cu(H₂O)(en)₂]₂{[Cu(H₂O)₂(en)][SiCuW₁₁O₃₉]}·5H₂O (1, d-1 and l-1) and [Cu(H₂O)(en)₂]{[Cu(en)₂]₂[SiCuW₁₁O₃₉]}·2.5H₂O (2), were successfully synthesized under hydrothermal conditions. The main synthesis conditions of compound 1 (d-1 and l-1) and compound 2 are the same, however, the only difference is that the reaction temperatures are 80 °C and 140 °C, respectively. What''s more, compounds 1 and 2 can form a 1D chiral chain by Cu–O and W/Cu–O–W/Cu bonds, respectively, and further obtain a 3D-supramolecular framework through hydrogen bonding interaction. Meanwhile, due to the asymmetry of chiral compound 1, optical second-harmonic generation (SHG) was used to investigate the second-order nonlinear optical effect and it was found that the observed SHG efficiency of compound 1 is 0.3 times that of urea. To further investigate the chiral properties, d-1 and l-1 were used in the electrochemical enantioselective sensing of d-/l-tartaric acid (d-/l-tart) molecules, respectively, which demonstrates that d-1 and l-1 have a good application prospect in sensing chiral substances.

A pair of temperature-controlled chiral compounds, d- and l-[Cu(en)₂(H₂O)]₂{[Cu(en)(H₂O)₂][SiCuW₁₁O₃₉]}·5H₂O (en = ethanediamine) are isolated by hydrothermal method, having a good application prospect in sensing d-/l-tartaric acid.     

Substituted l-tryptophan-l-phenyllactic acid conjugates produced by an endophytic fungus Aspergillus aculeatus using an OSMAC approach

The endophytic fungus Aspergillus aculeatus isolated from leaves of the papaya plant Carica papaya was fermented on solid rice medium, yielding a new l-tryptophan-l-phenyllactic acid conjugate (1) and thirteen known compounds (11, 14–25). In addition, an OSMAC approach was employed by adding eight different sodium or ammonium salts to the rice medium. Addition of 3.5% NaNO₃ caused a significant change of the metabolite pattern of the fungus as indicated by HPLC analysis. Subsequent isolation yielded several new substituted l-tryptophan-l-phenyllactic acid conjugates (1–10) in addition to three known compounds (11–13), among which compounds 2–10, 12–13 were not detected in the rice control culture. All structures were unambiguously elucidated by one and two dimensional NMR spectroscopy and by mass spectrometry. The absolute configuration of the new compounds was determined by Marfey''s reaction and X-ray single crystal diffraction. Compounds 19–22 showed cytotoxicity against the L5178Y mouse lymphoma cell line with IC₅₀ values of 3.4, 1.4, 7.3 and 23.7 μM, respectively.

Indole-derived alkaloids from Aspergillus aculeatus using an OSMAC approach.     

Diphenylpyrenylamine-functionalized polypeptides: secondary structures,aggregation-induced emission,and carbon nanotube dispersibility

In this study we prepared—through ring-opening polymerization of γ-benzyl-l-glutamate N-carboxyanhydride (BLG-NCA) initiated by N,N-di(4-aminophenyl)-1-aminopyrene (pyrene-DPA-2NH₂)—poly(γ-benzyl-l-glutamate) (PBLG) polymers with various degrees of polymerization (DP), each featuring a di(4-aminophenyl)pyrenylamine (DPA) luminophore on the main backbone. The secondary structures of these pyrene-DPA-PBLG polypeptides were investigated using Fourier transform infrared spectroscopy and wide-angle X-ray diffraction, revealing that the polypeptides with DPs of less than 19 were mixtures of α-helical and β-sheet conformations, whereas the α-helical structures were preferred for longer chains. Interestingly, pyrene-DPA-2NH₂ exhibited weak photoluminescence (PL), yet the emission of the pyrene-DPA-PBLG polypeptides was 16-fold stronger, suggesting that attaching PBLG chains to pyrene-DPA-2NH₂ turned on a radiative pathway for the non-fluorescent molecule. Furthermore, pyrene-DPA-2NH₂ exhibited aggregation-caused quenching; in contrast, after incorporation into the PBLG segments with rigid-rod conformations, the resulting pyrene-DPA-PBLG polypeptides displayed aggregation-induced emission. Transmission electron microscopy revealed that mixing these polypeptides with multiwalled carbon nanotubes (MWCNTs) in DMF led to the formation of extremely dispersible pyrene-DPA-PBLG/MWCNT composites. The fabrication of MWCNT composites with such biocompatible polymers should lead to bio-inspired carbon nanostructures with useful biomedical applications.

PBLG chains to pyrene-DPA-2NH₂ turned on a radiative pathway for the non-fluorescent molecule and TEM revealed these polypeptides with carbon nanotube to form PBLG/MWCNT composite.     

Ring opening polymerization of d,l-lactide and ε-caprolactone catalysed by (pyrazol-1-yl)copper(ii) carboxylate complexes

1,2-Bis{(3,5-dimethylpyrazol-1-yl)methyl}benzene (L) reacts with [Cu(OAc)₂] and C₆H₅COOH, 4-OH-C₆H₄COOH, 2-Cl-C₆H₄COOH and (3,5-NO₂)₂-C₆H₃COOH to afford the copper complexes [Cu₂(C₆H₅COO)₄(L)₂] (1), [Cu₂(4-OH-C₆H₄COO)₄(L)₂] (2), [Cu₂(2-Cl-C₆H₄COO)₄(L)₂]_n (3) and [Cu{(3,5-NO₂)₂-C₆H₃COO}₂L]_n (4) which are characterised by IR, mass spectrometry, elemental analyses, and X-ray crystallography. The structural data revealed two geometries that are adopted by the complexes: (i) paddle wheel in 1, 2·7H₂O, 3 and (ii) regular chains in 3 and 4. Magnetic studies show strong antiferromagnetic couplings in the paddle wheel complexes and a weak antiferromagnetic coupling in the monometallic chain one. Catalysis studies performed with these complexes (1–4) showed that they initiate ring opening polymerization (ROP) of ε-caprolactone (ε-CL) under solvent-free conditions and d,l-lactide in toluene at elevated temperatures. Polycaprolactone (PCL) and poly(d,l-lactide) (PLA) obtained from the polymerization reactions are of low molecular weights (858 for PCL and 602 Da for PLA for initiator 1) and polydispersity indices (typically 2.16 for PCL and 1.64 for PLA with 1 as the initiator). End group analysis of the polymers, determined by MALDI-ToF MS, indicates that the polymers have benzoate, hydroxyl, methoxy and cyclic end groups.

We report the synthesis, structure and complete characterization of four new pyrazolyl carboxylate-based copper(ii) complexes that catalyze the ring opening polymerization of ε-caprolactone under solvent-free conditions and of d,l-lactide in toluene.     

Synthesis and stereocomplex formation of enantiomeric alternating copolymers with two types of chiral centers,poly(lactic acid-alt-2-hydroxybutanoic acid)s

Stereocomplex (SC) formation was reported for the first time for enantiomeric alternating copolymers consisting of repeating units with two types of chiral centers, poly(lactic acid-alt-2-hydroxybutanoic acid)s [P(LA-alt-2HB)s]. l,l-Configured poly(l-lactic acid-alt-l-2-hydroxybutanoic acid) [P(LLA-alt-l-2HB)] and d,d-configured poly(d-lactic acid-alt-d-2-hydroxybutanoic acid) [P(DLA-alt-d-2HB)] were amorphous. Blends of P(LLA-alt-l-2HB) and P(DLA-alt-d-2HB) were crystallizable and showed typical SC-type wide-angle X-ray diffraction profiles similar to those reported for stereocomplexed blends of poly(l-lactic acid) and poly(d-lactic acid) homopolymers and of poly(l-2-hydroxybutanoic acid) and poly(d-2-hydroxybutanoic acid) homopolymers, and of l,l-configured poly(l-lactic acid-co-l-2-hydroxybutanoic acid) [P(LLA-co-l-2HB)] and d,d-configured poly(d-lactic acid-co-d-2-hydroxybutanoic acid) [P(DLA-co-d-2HB)] random copolymers. The melting temperature values and melting enthalpy values at 100% crystallinity for stereocomplexed solvent-evaporated and precipitated P(LLA-alt-l-2HB)/P(DLA-alt-d-2HB) blends were correspondingly 187.5 and 187.9 °C, and 98.1 and 91.8 J g⁻¹. Enantiomeric polymer blending of P(LLA-alt-l-2HB) and P(DLA-alt-d-2HB) can confer crystallizability by stereocomplexation and the biodegradable materials with a wide variety of physical properties and biodegradability are highly expected to be prepared by synthesis of alternating copolymers of various combinations of two types of chiral α-substituted 2-hydroxyalkanoic acid monomers and their SC crystallization.

Stereocomplex formation was reported for alternating copolymers of chiral α-substituted 2-hydroxyalkanoic acids which can be utilized for preparation of biodegradable materials with a variety of physical properties and biodegradability.     

Novel Schiff base cobalt(ii) phthalocyanine with appliance of MWCNTs on GCE: enhanced electrocatalytic activity behaviour of α-amino acids

A novel tetra-4-{(E)-[(8-aminonaphthalen-1-yl)imino]methyl}-2-methoxyphenol Co(ii) phthalocyanine (CoTANImMMPPc) was synthesized using a precursor protocol and characterized via electroanalytical and spectroscopic techniques. The FT-IR spectra of the synthesized compounds showed significant peaks corresponding to the functional groups of the precursors and phthalocyanine (Pc) compound. The mass and NMR spectra confirmed the formation of the target precursor compounds. A film of CoTANImMMPPc was deposited on the surface of an electrode and applied for the detection and monitoring of l-alanine and l-arginine. The cyclic voltammetric studies of l-alanine and l-arginine using the (CoTANImMMPPc/MWCNTs/GC) electrode showed a linear response in the range of 50–500 nM and the limit of detection was found to be 1.5 and 1.2 nM, respectively. Differential pulse voltammetry and chronoamperometry showed that the catalytic response for l-alanine and l-arginine is in the range of 50–500 nM with an LoD of 1.8 and 2.3 nM, respectively. The oxidation-active CoTANImMMPPc film significantly enhanced the current response in the chronoamperometric method and displayed a selective and sensitive response towards l-alanine and l-arginine in the presence of various other bio-molecules. The developed electrode showed good working stability and was applied for the analysis of real samples, which yielded satisfactory results. Therefore, CoTANImMMPPc-MWCNTs/GCE shows good analytical performance, is economical and produced via a simple synthetic method and can be applied as a sensor for the detection of l-alanine and l-arginine.

A novel CoTANImMMPPc complex was synthesized using a precursor protocol and characterized via electroanalytical and spectroscopic techniques with enhanced electrocatalytic behaviour of α-amino acids.     

l-Arginine administration attenuates airway inflammation by altering l-arginine metabolism in an NC/Nga mouse model of asthma

Changes in l-arginine metabolism, including increased arginase levels and decreased nitric oxide production, are involved in the pathophysiology of asthma. In this study, using an intranasal mite-induced NC/Nga mouse model of asthma, we examined whether administration of l-arginine ameliorated airway hyperresponsiveness and inflammation by altering l-arginine metabolism. Experimental asthma was induced in NC/Nga mice via intranasal administration of mite crude extract (50 µg/day) on 5 consecutive days (days 0–4, sensitization) and on day 11 (challenge). Oral administration of l-arginine (250 mg/kg) was performed twice daily on days 5–10 for prevention or on days 11–13 for therapy. On day 14, we evaluated the inflammatory airway response (airway hyperresponsiveness, the number of cells in the bronchoalveolar lavage fluid, and the changes in pathological inflammation of the lung), arginase expression and activity, l-arginine bioavailability, and the concentration of NOx, the end products of nitric oxide. Treatment with l-arginine ameliorated the mite-induced inflammatory airway response. Furthermore, l-arginine administration attenuated the increases in arginase expression and activity and elevated the NOx levels by enhancing l-arginine bioavailability. These findings indicate that l-arginine administration may contribute to the improvement of asthmatic symptoms by altering l-arginine metabolism.     

l-Cysteine modified metal–organic framework as a chiral stationary phase for enantioseparation by capillary electrochromatography

A new kind of chiral zirconium based metal–organic framework, l-Cys-PCN-222, was synthesized using l-cysteine (l-Cys) as a chiral modifier by a solvent-assisted ligand incorporation approach and utilized as the chiral stationary phase in the capillary electrochromatography system. l-Cys-PCN-222 was characterized by X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, Fourier-transform infrared spectra, nitrogen adsorption/desorption, circular dichroism spectrum, zeta-potential and so on. The results revealed that l-Cys-PCN-222 had the advantages of good crystallinity, high specific surface area (1818 m² g⁻¹), thermal stability and chiral recognition performance. Meanwhile, the l-Cys-PCN-222-bonded open-tubular column was prepared using l-Cys-PCN-222 particles as the solid phase by ‘thiol–ene’ click chemistry reaction and characterized by scanning electron microscopy, which proved the successful bonding of l-Cys-PCN-222 to the column inner wall. Finally, the stability, reproducibility and chiral separation performance of the l-Cys-PCN-222-bonded OT column were measured. Relative standard deviations (RSD) of the column efficiencies for run-to-run, day-to-day, column-to-column and runs were 1.39–6.62%, and did not obviously change after 200 runs. The enantiomeric separation of 17 kinds of chiral compounds including acidic, neutral and basic amino acids, imidazolinone and aryloxyphenoxypropionic pesticides, and fluoroquinolones were achieved in the l-Cys-PCN-222-bonded OT column. These results demonstrated that the chiral separation system of the chiral metal–organic frameworks (CMOFs) coupled with capillary electrochromatography has good application prospects.

A new kind of chiral zirconium-based metal–organic framework, l-Cys-PCN-222, was synthesized by the SALI method and utilized as the chiral stationary phase in a capillary electrochromatography system for enantioseparation.     

Integrated optical and electrochemical detection of Cu2+ ions in water using a sandwich amino acid–gold nanoparticle-based nano-biosensor consisting of a transparent-conductive platform

In this paper, an optical-electrochemical nano-biosensor was introduced for measuring Cu²⁺ ion concentrations in water. A multi-step procedure was used to fabricate the transparent-conductive biosensor platform consisting of an l-cysteine–gold nanoparticle-based sandwich structure. First, colloidal gold nanoparticles (GNPs) were synthesized according to the Turkevich–Frens method with some modifications and then functionalized with l-cysteine molecules (GNP/l-cys). Then, cyclic voltammetry was preformed in buffered solutions containing HAuCl₄·3H₂O for gold nanoparticle electrodeposition on cleaned ITO glasses. The GNP-electrodeposited ITO glasses (ITO/GNPs) were thermally treated in air atmosphere for 1 hour at a temperature of 300 °C. Following the procedure, the gold nanoparticles on ITO/GNPs substrates were functionalized with l-cysteine to prepare ITO/GNPs/l-cys substrates. Finally, the sandwich-type substrates of ITO/GNPs/l-cys⋯Cu²⁺⋯l-cys/GNPs were fabricated by accumulation of Cu²⁺ ions using an open circuit technique performed in copper ion buffer solutions in the presence of previously produced colloidal GNP/l-cys nanoparticles. The effective parameters including GNP/l-cys solution volume, pre-concentration pH and pre-concentration time on the LSPR and SWV responses were investigated and optimized. The fabricated transparent-conductive platforms were successfully assessed as a nano-biosensor for detection of copper ions using two different methods of square wave voltammetry (SWV) and localized surface plasmon resonance (LSPR). As a result, the proposed biosensor showed a high sensitivity, selectivity and a wide detectable concentration range to copper ions. The total linear range and the limit of detection (LOD) of the nano-biosensor were 10–100 000 nM (0.6–6354.6 ppb) and below 5 nM (0.3 ppb), respectively. The results demonstrated the potential of combining two different optical and electrochemical methods for quantitation of the single analyte on the same biosensor platform and obtaining richer data. Also, these results indicated that the developed LSPR-SWV biosensor was superior to many other copper biosensors presented in the literature in terms of linear range and LOD. The developed nano-biosensor was successfully applied in the determination of trace Cu²⁺ concentration in actual tap water samples.

The transparent-conductive platforms of ITO/GNPs/l-cys⋯Cu²⁺⋯l-cys/GNPs were fabricated for quantitation of Cu²⁺ ions in water samples using combined LSPR and SWV methods.     

Au–Ag core–shell composite nanoparticles as a selective and sensitive plasmonic chemical probe for l-cysteine detection in Lens culinaris (lentils)

The present work reported is a simple and selective method for the colorimetrical detection of l-cysteine in Lens culinaris (or lentils) using Au–Ag core–shell (Au core Ag shell) composite nanoparticles as a chemical probe. The phenomenon is based on the color change of composite nanoparticles from yellowish brown to light blue, followed by a shift of the localized surface plasmon resonance (LSPR) absorption band in the UV-visible region (i.e., 200–800 nm) with the addition of l-cysteine into the solution of bimetallic nanoparticles. The mechanism for the detection of l-cysteine is based on the electrostatic interaction of the metal ion with the thiol group of the amino acid, which causes the red shift of the LSPR band at 685 nm. The size distribution, morphology, composition and optical properties of the Au–Ag core–shell composite nanoparticles were characterized by transmission electron microscopy (TEM), dynamic light scattering (DLS), energy dispersive X-ray diffraction (EDX), UV-visible spectrophotometer and Fourier transform infrared spectroscopy (FTIR) techniques. An excellent linearity range for the present method was observed in the range of 20–140 μg mL⁻¹ with a limit of detection at 1.95 μg mL⁻¹ and correlation coefficient (R²) of 0.986. A good% recovery of 4.0% showed the selectivity of the method for l-cysteine determination from sample matrices. The advantageous features of the present method are being simple, rapid, low cost and selectivity towards the determination of l-cysteine in lentils.

The present work reported is a simple and selective method for the colorimetrical detection of l-cysteine in Lens culinaris (or lentils) using Au–Ag core–shell (Au core Ag shell) composite nanoparticles as a chemical probe.     

Efficiency of liquid tin(ii) n-alkoxide initiators in the ring-opening polymerization of l-lactide: kinetic studies by non-isothermal differential scanning calorimetry

Novel soluble liquid tin(ii) n-butoxide (Sn(OnC₄H₉)₂), tin(ii) n-hexoxide (Sn(OnC₆H₁₃)₂), and tin(ii) n-octoxide (Sn(OnC₈H₁₇)₂) initiators were synthesized for use as coordination–insertion initiators in the bulk ring-opening polymerization (ROP) of l-lactide (LLA). In order to compare their efficiencies with the more commonly used tin(ii) 2-ethylhexanoate (stannous octoate, Sn(Oct)₂) and conventional tin(ii) octoate/n-alcohol (SnOct₂/nROH) initiating systems, kinetic parameters derived from monomer conversion data were obtained from non-isothermal differential scanning calorimetry (DSC). In this work, the three non-isothermal DSC kinetic approaches including dynamic (Kissinger, Flynn–Wall, and Ozawa); isoconversional (Friedman, Kissinger–Akahira–Sunose (KAS) and Ozawa–Flynn–Wall (OFW)); and Borchardt and Daniels (B/D) methods of data analysis were compared. The kinetic results showed that, under the same conditions, the rate of polymerization for the 7 initiators/initiating systems was in the order of liquid Sn(OnC₄H₉)₂ > Sn(Oct)₂/nC₄H₉OH > Sn(Oct)₂ ≅ liquid Sn(OnC₆H₁₃)₂ > Sn(Oct)₂/nC₆H₁₃OH ≅ liquid Sn(OnC₈H₁₇)₂ > Sn(Oct)₂/nC₈H₁₇OH. The lowest activation energies (E_a = 52, 59, and 56 kJ mol⁻¹ for the Kissinger, Flynn–Wall, and Ozawa dynamic methods; E_a = 53–60, 55–58, and 60–62 kJ mol⁻¹ for the Friedman, KAS, and OFW isoconversional methods; and E_a = 76–84 kJ mol⁻¹ for the B/D) were found in the polymerizations using the novel liquid Sn(OnC₄H₉)₂ as the initiator, thereby showing it to be the most efficient initiator in the ROP of l-lactide.

The efficiency of homogeneous liquid tin(ii) n-alkoxide initiators in the ROP of l-lactide was reported in this work by non-isothermal DSC kinetic approaches.     

Bismuth subsalicylate,a low-toxicity catalyst for the ring-opening polymerization (ROP) of l-lactide (l-LA) with aliphatic diol initiators: synthesis,characterization, and mechanism of initiation

The ring-opening polymerization (ROP) of l-lactide (l-LA) was induced by the catalytic action of bismuth subsalicylate (BiSS) using linear aliphatic diols [HO(CH₂)_nOH, where n = 2, 3, 4, 5, 6, and 8] as initiators and chain transfer agents. The theoretical and experimental degree of polymerization (DP) in all samples of α,ω-hydroxy telechelic poly(l-lactide) (HOPLLAOH) had a good agreement in all samples, an effect attributed to the interaction of BiSS with HO(CH₂)_nOH inducing a transfer reaction. HOPLLAOH was synthesized and characterized by a range of analytical techniques, confirming the insertion of methylene groups from the initiator into the main chain of the polyester. The glass-transition temperature (T_g) of HOPLLAOH was found to be proportional to the number of methylene groups present in the diol. Various parameters regarding the ROP of l-LA were studied, such as temperature, time of reaction, amount of catalyst, and the nature of the diols. A kinetic study of the reaction allowed the determination of the rate constants (k) and activation energy (E_a). A mechanism of initiation is proposed based on a computational study using density functional theory (DFT), evidencing the role of the alkyl diol as an initiator, producing an alkoxide (Bi–OROH). This species then acts as a nucleophile, attacking the carbonyl group, inducing its insertion, and ultimately completing the ring-opening of l-LA.

Bismuth subsalicylate (BiSS) acted as a catalyst in the ring-opening polymerization of l-lactide (l-LA) in the presence of alkyl diols as initiators.