Highly sensitive determination of lead(ii) and cadmium(ii) by a large surface area mesoporous alumina modified carbon paste electrode

Nanosized mesoporous γ-alumina (M-γ-Al₂O₃) was first prepared and then modified into a carbon paste to fabricate a novel modified carbon paste electrode. The prepared alumina has pores with an amorphous wall and large surface area. The electrochemical behavior of the modified carbon paste electrode was investigated using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods. The modified carbon paste electrode was employed to determine Pb²⁺ and Cd²⁺ simultaneously by a differential pulse voltammetry (DPV) method. Amperometric determination was carried out in 0.1 mol L⁻¹ NaAc–HAc buffer solution (pH 6.0) after enriching for 360 s at −1.0 V. The oxidation peak currents of Pb²⁺ and Cd²⁺ were proportional to their concentration in the range of 0.001–10 μmol L⁻¹ and 0.01–10 μmol L⁻¹, respectively. The detection limits of Pb²⁺ and Cd²⁺ were 0.20 nmol L⁻¹ and 2.0 nmol L⁻¹ (S/N = 3), respectively. The modified carbon paste electrode shows good stability, repeatability and sensitivity. The proposed method was applied to the determination of Pb²⁺ and Cd²⁺ in water samples with satisfactory results.

Nanosized mesoporous γ-alumina (M-γ-Al₂O₃) was first prepared and then modified into a carbon paste to fabricate a novel modified carbon paste electrode.     

Determination of heavy metals in water using an FTO electrode modified with CeO2/rGO nanoribbons prepared by an electrochemical method

The rGO/CeO₂/FTO nanocomposite modified electrode was prepared by an electrochemical method. A simple and highly sensitive electrochemical sensing platform for electrochemical rGO and modified CeO₂ nanoribbons directly on FTO electrodes was developed. Simultaneous determination of Pb²⁺ and Cd²⁺ used the differential pulse anodic stripping voltammetry (DPASV) method. The method was simple to operate, and CeO₂ nanobelts could be obtained simultaneously by electrodeposition and reduction of GO without further processing. This is an environmentally friendly electrochemical method to obtain modified electrodes under mild conditions. The experimental results showed that the linear calibration curves of Pb²⁺ and Cd²⁺ are 1–300 and 0.2–500 μg L⁻¹, respectively. At the same time, no interference from other coexisting metal ions was found during the detection process, which proved that the modified electrode had good stability and repeatability.

The rGO/CeO₂/FTO nanocomposite modified electrode was prepared by an electrochemical method.     

A simple fluorescent probe for detection of Ag+ and Cd2+ and its Cd2+ complex for sequential recognition of S2−

In this study, we designed and synthesized a simple probe 2-(8-((8-methoxyquinolin-2-yl)methoxy)quinolin-2-yl)benzo[d]thiazole (DQT) for detection of Ag⁺ and Cd²⁺ in a CH₃OH/HEPES (9 : 1 v/v, pH = 7.30) buffer system. Its structure was characterized by NMR, ESI-HR-MS and DFT calculations, and its fluorescence performance was also investigated. Probe DQT showed fluorescence quenching in response to Ag⁺ and Cd²⁺ with low detection limits of 0.42 μM and 0.26 μM, respectively. Importantly, the complexation of the probe with Cd²⁺ resulted in a red shift from blue to green, making it possible to detect Ag⁺ and Cd²⁺ by the naked eye under an ultraviolet lamp. The DQT-Cd²⁺ complex could be used for sequential recognition of S²⁻. The recovery response could be repeated 3 times by alternate addition of Cd²⁺ and S²⁻. A filter paper strip test further demonstrated the potential of probe DQT as a convenient and rapid assay.

A fluorescent probe for detection of Ag⁺ and Cd²⁺ and its Cd²⁺ complex for sequential recognition of S²⁻.     

Thiolated poly(aspartic acid)-functionalized two-dimensional MoS2, chitosan and bismuth film as a sensor platform for cadmium ion detection

In this work, a sensitive electrochemical platform for determination of cadmium ions (Cd²⁺) is obtained using thiolated poly(aspartic acid) (TPA)-functionalized MoS₂ as a sensor platform by differential pulse anodic stripping voltammetry (DPASV). The performance of the TPA–MoS₂-modified sensor is systemically studied. It demonstrates that the TPA–MoS₂ nanocomposite modified sensor exhibits superior analytical performance for Cd²⁺ over a linear range from 0.5 μg L⁻¹ to 50 μg L⁻¹, with a detection limit of 0.17 μg L⁻¹. Chitosan is able to form a continuous coating film on the surface of the GC electrode. The good sensing performance of the TPA–MoS₂-modified sensor may be attributed to the following factors: the large surface area of MoS₂ (603 m² g⁻¹), and the abundant thiol groups of TPA. Thus, the TPA–MoS₂-modified sensor proves to be a reliable and environmentally friendly tool for the effective monitoring of Cd²⁺ existing in aquacultural environments.

In this work, a sensitive electrochemical platform for determination of cadmium ions (Cd²⁺) is obtained using thiolated poly(aspartic acid) (TPA)-functionalized MoS₂ as a sensor platform by differential pulse anodic stripping voltammetry (DPASV).     

Selective aptamer conjugation to silver-coated magnetite nanoparticles for magnetic solid-phase extraction of trace amounts of Pb2+ ions

Herein, a novel aptamer-functionalized magnetic adsorbent was developed and combined with magnetic solid-phase extraction (MSPE) for the specific enrichment of Pb²⁺ ions prior to flame atomic absorption spectrometric detection. First, silver-coated magnetite core–shell nanoparticles (Fe₃O₄@Ag MNPs) were synthesized by the chemical reduction of silver ions on the surface of magnetite nanoparticles. After that, the selective DNA aptamer against Pb²⁺ was conjugated on the surface of the synthesized nanoparticles to form aptamer-modified magnetic nanoparticles (Fe₃O₄@Ag-APT). The characterization of the prepared adsorbent was performed through SEM imaging, XRD, FT-IR, EDX, and DRS instruments. The influence of the various experimental parameters on the adsorption and desorption steps in MSPE was investigated via Taguchi experimental design to optimize different parameters. Under the optimized conditions, the Pb²⁺ calibration graph was linear in the range of 33–1000 μg L⁻¹. The relative standard deviation (RSD%) of the method for six replicates containing 100 μg L⁻¹ of Pb²⁺ ions was 0.34%. Furthermore, the limit of detection (LOD) and the limit of quantification (LOQ) were 10 μg L⁻¹ and 33.3 μg L⁻¹, respectively. Finally, the applicability of the proposed method was successfully confirmed by preconcentration and determination of trace amounts of Pb²⁺ ions in tap and seawater samples. We showed a proof of concept for Fe₃O₄@Ag-APT as an efficient bio-adsorbent, offering a promising strategy for the specific binding/removal of toxic heavy metal ions.

Herein, a novel aptamer-functionalized magnetic adsorbent was developed and combined with magnetic solid-phase extraction (MSPE) for the specific enrichment of Pb²⁺ ions prior to flame atomic absorption spectrometric detection.     

Triazole-based novel bis Schiff base colorimetric and fluorescent turn-on dual chemosensor for Cu2+ and Pb2+: application to living cell imaging and molecular logic gates

A triazole-based novel bis Schiff base colorimetric and fluorescent chemosensor (L) has been designed, synthesized and characterized by elemental analysis, ¹H-NMR, ESI-MS, FTIR spectra and DFT studies. The receptor L showed selective and sensitive colorimetric sensing ability for Cu²⁺ and Pb²⁺ ions by changing color from colorless to yellow and light yellow respectively in CH₃OH–tris-buffer (1 : 1, v/v). However, it displayed strong fluorescence enhancement upon the addition of both Cu²⁺ and Pb²⁺ ions, attributed to the blocking of PET. The fluorometric detection limits for Cu²⁺ and Pb²⁺ were found to be 12 × 10⁻⁷ M and 9 × 10⁻⁷ M and the colorimetric detection limits were 3.7 × 10⁻⁶ M and 1.2 × 10⁻⁶ M respectively; which are far below the permissible concentration in drinking water determined by WHO. Moreover, it was found that chemosensor L worked as a reversible fluorescence probe towards Cu²⁺ and Pb²⁺ ions by the accumulation of S²⁻ and EDTA respectively. Based on the physicochemical and analytical methods like ESI-mass spectrometry, Job plot, FT-IR, ¹H-NMR spectra and DFT studies the detection mechanism may be explained as metal coordination, photoinduced electron transfer (PET) as well as an internal charge transfer (ICT) process. The sensor could work in a pH span of 4.0–12.0. The chemosensor L shows its application potential in the detection of Cu²⁺ and Pb²⁺ in real samples, living cells and building of molecular logic gate.

A novel triazole-based bis Schiff base colorimetric and fluorescent chemosensor (L) has been designed, synthesized and characterized. The chemo-sensor L shows its application potential in the detection of Cu²⁺ and Pb²⁺ in living cells and building molecular logic gate.     

Large interlayer spacing Nb4C3Tx (MXene) promotes the ultrasensitive electrochemical detection of Pb2+ on glassy carbon electrodes

A Nb₄C₃T_x (MXene)-modified glassy carbon electrode was used for the electrochemical detection of Pb²⁺ ions in aqueous media. The sensing platform was evaluated by anodic stripping analysis after optimizing the influencing factors such as pH, deposition potential, and time. The large interlayer spacing, high c lattice parameter and higher conductivity of Nb₄C₃T_x compared to other MXenes enhance the electrochemical detection of Pb²⁺. The developed sensor can reach a detection limit of 12 nM at a potential ∼−0.6 V. Additionally, the developed sensor showed promising selectivity in the presence of Cu²⁺ and Cd²⁺, and stability for at least 5 cycles of continuous measurements with good repeatability. This work demonstrates the potential applications of Nb₄C₃T_x towards the development of effective electrochemical sensors.

Large interlayer spacing Nb₄C₃T_x (MXene) promotes the ultrasensitive electrochemical detection of Pb²⁺ on glassy carbon electrodes     

A highly sensitive and selective chemosensor for Pb2+ based on quinoline–coumarin

In this study, a highly sensitive and selective fluorescent chemosensor, ethyl(E)-2-((2-((2-(7-(diethylamino)-2-oxo-2H-chromene-3-carbonyl)hydrazono)methyl)quinolin-8-yl)oxy)acetate (1), was synthesized and characterized by ¹H NMR, ¹³C NMR and ESI-MS. Sensor 1 showed an “on–off” fluorescence response to Pb²⁺ with a 1 : 1 binding stoichiometry in CH₃CN/HEPES buffer medium (9 : 1 v/v). The detection limit of sensor 1 to Pb²⁺ was determined to be 0.5 μM, and the stable pH range for Pb²⁺ detection was from 4 to 8.

A highly sensitive and selective fluorescent chemosensor 1 was synthesized and used for naked eye detection of Pb²⁺.     

Super rapid removal of copper,cadmium and lead ions from water by NTA-silica gel

Copper (Cu²⁺), cadmium (Cd²⁺) and lead ions (Pb²⁺) are toxic to human beings and other organisms. In this study, a silica gel material modified with nitrilotriacetic acid (NTA-silica gel) was sensibly designed and prepared via a simple amidation procedure for the removal of Cu²⁺, Cd²⁺ and Pb²⁺ from water. The NTA-silica gels showed rapid removal performances for the three metal ions (Pb²⁺ (<2 min), Cu²⁺ and Cd²⁺ (<20 min)) with relatively high adsorption capacities (63.5, 53.14 and 76.22 mg g⁻¹ for Cu²⁺, Cd²⁺ and Pb²⁺, respectively). At the same concentration of 20 mg L⁻¹, the removal efficiencies of the three metals by the adsorbent ranged from 96% to 99%. The Freundlich and Langmuir models were utilized to fit the adsorption isotherms. The adsorption kinetics for the three metal ions was pseudo-second-order kinetics. The removal performance of the NTA-silica gels increased in a wide pH range (2–9) and maintained in the presence of competitive metal ions (Na⁺, Mg²⁺, Ca²⁺ and Al³⁺) with different concentrations. In addition, the NTA-silica gels were easily regenerated (washed with 1% HNO₃) and reused for 5 cycles with high adsorption capacity. This study indicates that the NTA-silica gel is a reusable adsorbent for the rapid, convenient, and efficient removal of Cu²⁺, Cd²⁺, and Pb²⁺ from contaminated aquatic environments.

A silica gel material modified with nitrilotriacetic acid (NTA-silica gel) was sensibly designed and prepared via a simple method for the super rapid removal of Cu²⁺, Cd²⁺ and Pb²⁺ from water.     

First-principles study of coadsorption of Cu2+ and Cl− ions on the Cu (110) surface

Motivated by the importance of Cl⁻ in the industrial electrolytic Cu plating process, we study the coadsorption of Cl⁻ and Cu²⁺ on the Cu (110) surface using first-principles density functional theory (DFT) calculations. We treat the solvent implicitly by solving the linearized Poisson–Boltzmann equation and evaluate the electrochemical potential and energetics of ions with the computational hydrogen electrode approach. We find that Cl⁻ alone is hardly adsorbed at sufficiently negative electrochemical potentials μ_Cl but stable phases with half and full Cl⁻ coverage was observed as μ_Cl is made more positive. For Cl⁻ and Cu²⁺ coadsorption, we identified five stable phases for electrode biases between −2V < U_SHE < 2V, with two being Cl⁻ adsorption phases, two being Cl⁻ + Cu²⁺ coadsorption phases and one being a pure Cu²⁺ adsorption phase. In general, the free energy of adsorption for the most stable phases at larger |U_SHE| are dominated by the energy required to move electrons between the system and the Fermi level of the electrode, while that at smaller |U_SHE| are largely dictated by the binding strength between Cl⁻ and Cu²⁺ adsorbates on the Cu (110) substrate. In addition, by studying the free energy of adsorption of Cu²⁺ onto pristine and Cl⁻ covered Cu (110), we conclude that the introduction of Cl⁻ ion does not improve the energetics of Cu²⁺ adsorption onto Cu (110).

Free energy of adsorption for the most stable phases predicted by DFT calculations as a function of electrode potential.     

A bromine-catalysis-synthesized poly(3,4-ethylenedioxythiophene)/graphitic carbon nitride electrochemical sensor for heavy metal ion determination

In this paper, poly(3,4-ethylenedioxythiophene)/graphitic carbon nitride (PEDOT/g-C₃N₄) composites were prepared by the bromine catalysed polymerization (BCP) method with varying weight ratios of monomer to g-C₃N₄. For comparison, solid-state polymerization (SSP) and metal oxidative polymerization (MOP) methods were also used for the synthesis of PEDOT/g-C₃N₄ composites. Electrochemical determination of heavy metal ions (Cd²⁺ and Pb²⁺) was carried out by differential pulse voltammetry (DPV) on composite-modified glass carbon electrodes (GCEs), which were prepared by different methods. The obtained composites were analysed by Fourier transform infrared spectroscopy (FT-IR), ultraviolet-visible absorption spectroscopy (UV-vis), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results showed that the bromine catalysed polymerization (BCP) method is an effective way to prepare the PEDOT/g-C₃N₄ composite, and the combination of PEDOT with g-C₃N₄ can improve the electrochemical activity of electrode materials. And, the composite from the BCP method modified electrode (PEDOT/10 wt% g-C₃N₄/GCE) exhibited the widest linear responses for Cd²⁺ and Pb²⁺, ranging from 0.06–12 μM and 0.04–11.6 μM with detection limits (S/N = 3) of 0.0014 μM and 0.00421 μM, respectively.

The PEDOT/g-C₃N₄ composite prepared by a Br₂-catalyzed polymerization method exhibited the widest linear electrochemical responses for Cd²⁺ and Pb²⁺.     

Selective determination of Ag+ in the presence of Cd2+, Hg2+ and Cu2+ based on their different interactions with gold nanoclusters

In this work, a fluorescence method was developed for selective detection of Ag⁺ in the presence of Cd²⁺, Hg²⁺, and Cu²⁺ based on gold nanoclusters (AuNCs). That is, bovine serum albumin (BSA) templated AuNCs with double emission peaks were synthesized using BSA as a protective agent. AuNCs with uniform distribution and average size between 2.0 and 2.2 nm were synthesized using a green and simple method, and showed bright orange-red fluorescence under ultraviolet light. AuNCs have two emission peaks at 450 nm and 630 nm with an excitation wavelength of 365 nm. Under alkaline conditions, Cd²⁺ can combine with the surface sulfhydryl groups of BSA–AuNCs to form Cd–S bonds, which cause AuNCs to aggregate, resulting in an increase in fluorescence intensity at 630 nm. Conversely, due to the d¹⁰–d¹⁰ metal affinity interaction, the addition of Hg²⁺ can reduce the fluorescence peak at 630 nm. Ag⁺ was reduced to Ag⁰ by gold nuclei in AuNCs, forming a stable hybrid Au@ AgNCs species with blue-shifted and enhanced fluorescence. Finally, the paramagnetic behavior of Cu²⁺ combined with BSA causes the excited electrons of the gold cluster to lose their energy via ISC, eventually leading to simultaneous quenching of the two emission peaks. The results show that the limit of detection (LOD) of Ag⁺, Hg²⁺, Cd²⁺ and Cu²⁺ is 1.19 μM, 3.39 μM, 1.83 μM and 5.95 μM, respectively.

A fluorescence method was developed for selective detection of Ag⁺ in the presence of Cd²⁺, Hg²⁺, and Cu²⁺ based on gold nanoclusters. The limit of detection for Ag⁺, Hg²⁺, Cd²⁺ and Cu²⁺ is 1.19 μM, 3.39 μM, 1.83 μM and 5.95 μM, respectively.     

A bifunctional sensor based on diarylethene for the colorimetric recognition of Cu2+ and fluorescence detection of Cd2+

A novel bifunctional sensor based on diarylethene with a benzyl carbazate unit was synthesized successfully. It not only served as a colorimetric sensor for the recognition of Cu²⁺ by showing changes in absorption spectra and solution color, but also acted as a fluorescent sensor for the detection of Cd²⁺ through obvious emission intensity enhancement and fluorescence color change. The sensor exhibited excellent selectivity and sensitivity towards Cu²⁺ and Cd²⁺, and the limits of detection for Cu²⁺ and Cd²⁺ were 8.36 × 10⁻⁸ mol L⁻¹ and 1.71 × 10⁻⁷ mol L⁻¹, respectively, which were much lower than those reported by the WHO and EPA in drinking water. Furthermore, its application in practical samples demonstrated that the sensor can be effectively applied for the detection of Cu²⁺ and Cd²⁺ in practical water samples.

A bifunctional sensor for colorimetric recognition of Cu²⁺ and fluorescent detection of Cd²⁺ was synthesized. It not only showed high selectivity and sensitivity to Cu²⁺ and Cd²⁺, but also could be used in practical water samples with high accuracy.     

Synthesis,characterisation and ion-binding properties of oxathiacrown ethers appended to [Ru(bpy)2]2+. Selectivity towards Hg2+, Cd2+ and Pb2+

A series of complexes with oxathiacrown ethers appended to a [Ru(bpy)₂]²⁺ moiety have been synthesized and characterised using ¹H NMR, ¹³C NMR, IR, electronic absorption and emission spectroscopies, mass spectrometry and elemental analyses. The complexes exhibit strong MLCT luminescence bands in the range 608–611 nm and one reversible metal centred oxidation potential in the range 1.00–1.02 V. Their selectivity and sensitivity towards Hg²⁺, Cd²⁺ and Pb²⁺ metal ions have been investigated using electronic absorption, luminescence, cyclic and differential pulse voltammetry titrations. Their responses towards selected cations and anions have also been investigated using electronic absorption and luminescence. While the complexes are selective towards Hg²⁺ and Cd²⁺ ions, none of them is selective towards Pb²⁺ ions. In particular, complex 2 gives a selective change in the UV/Vis absorbance with Hg²⁺ making it possible to detect mercury down to a detection limit of 68 ppm. The binding constants and limits of detection of the complexes have been calculated, with values ranging from 4.37 to 5.38 and 1.4 × 10⁻³ to 6.8 × 10⁻⁵ for log K_s and LOD respectively.

Oxathiacrown ether modified ruthenium complex 2 facilitates a selective naked-eye detection of Hg²⁺ with an instrumental detection limit of 68 ppm.     

In situ fast analysis of cadmium in rice by diluted acid extraction-anodic stripping voltammetry

In China, the production has not realized intensive cultivation and the problem of cadmium (Cd)-contaminated rice is salient, so it is important to classify rice with different degrees of Cd pollution by rapid detection method in situ. This paper established a method with a combination of dilute acid extraction pretreatment and electrochemical devices. Cd was extracted from rice using 3% HCl for 5 min. A standard curve was obtained based on a certified reference material in the rice matrix with different concentrations of Cd, which was fitted with the Cd concentration (μg kg⁻¹) against the stripping peak current value (μA), and the linear correlation coefficient was 0.9997. To analyze the applicability of the method, three factors including substrate diluents, particle diameter of the sample, and stability towards the method were evaluated. The limit of detection (LOD) was 2.02 μg kg⁻¹, and the repeatability and accuracy were satisfactory. Cd was determined in 142 samples collected from three major grain-producing provinces of China, and the results have good consistence with the microwave digestion-ICP-MS method. The developed method combined dilute acid extraction with a matrix matching standard curve in ASV for the first time, and it was significantly satisfactory for the detection requirements in China.

Diluted acid extraction combined with an electrochemical platform achieve analysis on-site in fields or grain depots.     

Double-edged effects and mechanisms of Zn2+ microenvironments on osteogenic activity of BMSCs: osteogenic differentiation or apoptosis

Zinc-incorporated biomaterials show promoting effects on osteogenesis; however, excessive zinc ions lead to cytotoxic reactions and also have other adverse effects. Therefore, the double-edged effects of Zn²⁺ microenvironments on osteogenesis may become critical issues for new material development. This study systematically investigated the bidirectional influences of diverse Zn²⁺ microenvironments on the cell adhesion, proliferation, osteogenic differentiation and apoptosis of rBMSCs. Furthermore, the mechanisms of zinc-induced osteogenic differentiation of rBMSCs and of cell apoptosis induced by high concentration of Zn²⁺ were both discussed in detail. The results indicated that the Zn²⁺ microenvironments of 2 μg mL⁻¹ and 5 μg mL⁻¹ effectively improved the initial adhesion and proliferation of rBMSCs, while that of 15 μg mL⁻¹ had exactly the opposite effect. More importantly, the suitable Zn²⁺ microenvironments (2 μg mL⁻¹ and 5 μg mL⁻¹) moderately increased the intracellular Zn²⁺ concentration by regulating zinc transportation, and then activated the MAPK/ERK signaling pathway to induce the osteogenic differentiation of rBMSCs. In contrast, the high Zn²⁺ concentration (15 μg mL⁻¹) not only inhibited the osteogenic differentiation of rBMSCs by damaging intracellular zinc homeostasis, but also induced rBMSC apoptosis by enhancing intracellular ROS generation. The current study clarified the double-edged effects of Zn²⁺ microenvironments on the osteogenic properties of rBMSCs and the related mechanisms, and may provide valuable guidance for optimizing the design of zinc-doped biomaterials and zinc-based alloys.

Dual-directional regulation of diverse Zn²⁺ microenvironments on osteogenic activity of BMSCs plays important roles in the design of zinc-containing biomaterials.     

Biomass-derived three-dimensional carbon framework for a flexible fibrous supercapacitor and its application as a wearable smart textile

High electrochemical performance and mechanical reliability are two important properties of the flexible fibrous supercapacitors (FFSCs) used in portable and wearable electronics. Herein, we introduce high-performance and stable FFSCs produced using Tetrapanax papyrifer with a honeycomb-like structure (the key material) acting as a frame for an activated carbon (AC) coating. The honeycomb-like structure facilitates penetration of electrolytes and electron transport in the AC particles. This reduces the contact resistance between the AC and current collector, thereby enhancing the electrochemical energy storage. The FFSCs possess long length and area specific capacitances of 20.8 mF cm⁻¹ and 83.9 mF cm⁻², respectively. In addition, the fabricated FFSCs display a maximum length (area) energy density of 3.98 μW h cm⁻¹ (16.1 μW h cm⁻²) at a power density of 0.07 mW cm⁻¹ (1.99 mW cm⁻²) and attain an excellent capacitance retention of 91% over 10 000 cycles. Moreover, the supercapacitors exhibit excellent mechanical flexibility with minor increase in capacitance upon bending. Three flexible fibrous supercapacitors in series power a red light-emitting diode, demonstrating the potential application of the flexible fibrous supercapacitors in smart textiles.

High electrochemical performance and mechanical reliability are two important properties of the flexible fibrous supercapacitors (FFSCs) used in portable and wearable electronics.     

Controllable synthesis of aluminum doped peony-like α-Ni(OH)2 with ultrahigh rate capability for asymmetric supercapacitors

Ion substitution and micromorphology control are two efficient strategies to ameliorate the electrochemical performance of supercapacitors electrode materials. Here, Al³⁺ doped α-Ni(OH)₂ with peony-like morphology and porous structure has been successfully synthesized through a facile one-pot hydrothermal process. The Al³⁺ doped α-Ni(OH)₂ electrode shows an ultrahigh specific capacitance of 1750 F g⁻¹ at 1 A g⁻¹, and an outstanding electrochemical stability of 72% after running 2000 cycles. In addition, the Al³⁺ doped α-Ni(OH)₂ electrode demonstrates an excellent rate capability (92% retention at 10 A g⁻¹). Furthermore, by using this unique Al³⁺ doped α-Ni(OH)₂ as the positive electrode and a hierarchical porous carbon (HPC) as the negative electrode, the assembled asymmetric supercapacitor can demonstrate a high energy/power density (49.6 W h kg⁻¹ and 14 kW kg⁻¹). This work proves that synthesizing an Al³⁺ doped structure is an effective means to improve the electrochemical properties of α-Ni(OH)₂. This scheme could be extended to other transition metal hydroxides to enhance their electrochemical performance.

Ion substitution and micromorphology control are two efficient strategies to ameliorate the electrochemical performance of supercapacitors electrode materials.     

The synthesis and application of (E)-N′-(benzo[d]dioxol-5-ylmethylene)-4-methyl-benzenesulfonohydrazide for the detection of carcinogenic lead

In this study, noble ligands of (E)-N′-(benzo[d]dioxol-5-ylmethylene)-4-methyl-benzenesulfonohydrazide (BDMMBSH) were prepared via a simple condensation method using benzo-[d][1,3]-dioxole carbaldehyde, benzenesulfonylhydrazine (BSH), and 4-methyl-benzenesulphonylhydrazine (4-MBSH) in good yield, which were crystallized in acetone, EtOAc, and EtOH. The BDMMBSH derivatives were characterized using different spectroscopic techniques, such as ¹H-NMR, ¹³C-NMR, FTIR, and UV-Vis spectroscopy, and their crystal structures were analyzed using the single crystal X-ray diffraction method (SCXRDM). Subsequently, the BDMMBSH compounds were used for the significant detection of the carcinogenic heavy metal ion, lead (Pb²⁺), via a reliable electrochemical approach. A sensitive and selective Pb²⁺ sensor was developed via the deposition of a thin layer of BDMMBSH on a GCE with the conducting polymer matrix Nafion (NF). The sensitivity, LOQ, and LOD of the proposed sensor towards Pb²⁺ were calculated from the calibration curves to be 2220.0 pA μM⁻¹ cm⁻², 320.0 mM, and 96.0 pM, respectively. The validation of the BDMMBSH/GCE/NF sensor probe was performed via the selective determination of Pb²⁺ in spiked natural samples with a satisfactory and rational outcome.

A sensitive cationic sensor was developed by BDMMBSH onto GCE with 5% Nafion using electrochemical method, which was validated with the selective determination of Pb²⁺ in spiked samples and found satisfactory results.     

Zinc(ii)-based coordination polymer encapsulated Tb3+ as a multi-responsive luminescent sensor for Ru3+, Fe3+, CrO42−, Cr2O72− and MnO4−

A zinc(ii)-based coordination polymer (CP), namely [Zn(modbc)₂]_n (Zn-CP) (modbc = 2-methyl-6-oxygen-1,6-dihydro-3,4′-bipyridine-5-carbonitrile), has been synthesized and characterized. Single-crystal structural determination reveals that Zn-CP is a two-dimensional framework structure with tetranuclear homometallic Zn₄(modbc)₄ units cross-linked by modbc. The excellent luminescence as well as good stability of Zn-CP do not enable it to have selective sensing capability for different ions. After encapsulation of Tb³⁺ in Zn-CP, the as-obtained fluorescent functionalized Tb³⁺@Zn-CP maintained excellent luminescence as well as stability, which made it a highly selective and sensitive multiresponsive luminescent sensor for Ru³⁺, Fe³⁺, CrO₄²⁻, Cr₂O₇²⁻, and MnO₄⁻ with high sensitivity, good anti-interference performance, and quick response time (∼10 s). The detection limits are 0.27 μM, 0.57 μM, 0.10 μM, 0.43 μM and 0.15 μM, respectively. A possible sensing mechanism was discussed in detail.

A composite, Tb³⁺@Zn-CP, for sensing Ru³⁺, Fe³⁺, CrO₄²⁻, Cr₂O₇²⁻ and MnO₄⁻ with fast response times was reported.