Cytotoxic effects of resin-modified orthodontic band adhesives: Are they safe?

Objective:To evaluate the cytotoxic effects of three different resin-modified orthodontic band adhesives.Materials and Methods:Three resin-modified orthodontic band adhesives (Bisco Ortho Band Paste LC™, Multi-Cure Glass Ionomer Band Cement™, and Transbond Plus Light Cure Band Adhesive™) were prepared and the samples were extracted in 3 mL of Basal Medium Eagle with 10% newborn calf serum for 24 hours. The L929 cells were plated (25,000 cells/mL) in wells of 96-well dishes and maintained in a humidified incubator for 24 hours at 37°C, 5% CO₂, and 95% air. After 24-hour incubation of the cells, the incubation medium was replaced by the immersed medium in which the samples were stored. Then L929 cells were incubated in contact with eluates for 24 hours. The cell mitochondrial activity was evaluated by the methyltetrazolium test. Twelve wells were used for each specimen, and methyltetrazolium tests were applied two times. The data were statistically analyzed using one-way analysis of variance and Tukey Honestly Significantly Different tests.Results:Results with L929 fibroblasts demonstrated that all freshly prepared resin-modified orthodontic band adhesive materials reduced vital cell numbers (P > .05), in comparison to the control group. Our data demonstrate that all materials showed significant cytotoxicity compared to the control group.Conclusions:The results indicate that all materials showed significant cytotoxicity compared to the control group, and further studies using different test methods are needed for all resin-modified orthodontic band adhesives.     

Shear bond strength of orthodontic resins after caries infiltrant preconditioning

Objective:To investigate the influence of caries infiltrant preconditioning on the shear bond strength of orthodontic resin cements on sound and demineralized enamel.Materials and Methods:Stainless-steel brackets were bonded to sound or artificially demineralized (14 d, acidic buffer, pH 5.0) bovine enamel specimens using a resin cement or a combination of caries infiltrant preconditioning (Icon, DMG) and the respective resin cement (light-curing composite: Heliosit Orthodontic, Transbond XT, using either Transbond XT Primer or Transbond Plus Self Etching Primer; light-curing resin-modified glass ionomer cement: Fuji Ortho; or self-curing composite: Concise Orthodontic Bonding System). Each group consisted of 15 specimens. Shear bond strength was evaluated after thermo-cycling (10,000×, 5°C to 55°C) at a crosshead speed of 1 mm/min, and data were statistically analyzed by analysis of variance, Mann-Whitney test, and Weibull statistics. Adhesive Remnant Index (ARI) scores and enamel fractures were determined at 25× magnification and were statistically analyzed by regression analyses (P < .05).Results:The caries infiltrant system significantly increased the shear bond strength of Transbond XT Primer, Transbond Plus Self Etching Primer, and Fuji Ortho in sound specimens, and of all resin cements except for the Concise Orthodontic Bonding System in demineralized enamel. Overall, caries infiltrant preconditioning decreased significantly the number of enamel fractures, but it did not affect ARI scores.Conclusion:Preconditioning of sound and demineralized enamel with the caries infiltrant system did not impair but rather increased the shear bond strength of most orthodontic resin cements while decreasing the risk of enamel fracture at debonding.     

In vitro evaluation of self-etch bonding in orthodontics using cyclic fatigue: Part I,Shear testing methods

Objective:To evaluate the bond strength of a self-etch bonding system using static loading and cyclic fatigue with shear testing. This is a two-part evaluation; the first part will evaluate shear testing, the second part tensile testing.Materials and Methods:Bovine teeth (n  =  82) were randomly distributed to either a self-etch (Transbond Plus) or total-etch (37% phosphoric-acid + Transbond XT) group. The static shear (SSBS) and cyclic shear (CSBS) bond strengths were measured 24 hours after the bonding of mesh-based brackets. The adhesive remnant index (ARI) and failure sites were evaluated.Results:The mean SSBS was 34.25 ± 9.21 and 24.64 ± 9.42 MPa for the total- and self-etch groups, respectively. CSBS was 24.07 ± 0.65 MPa and 18.92 ± 1.08 MPa for the total- and self-etch groups, respectively. Cyclic loading produced lower bond strengths compared to static testing for both adhesives; the difference was only statistically significant for the total-etch system. Comparison of the two materials showed a statistically significant difference between the two techniques. The total-etch had higher bond strengths than the self-etch bonding system. The samples showed a predominance of ARI scored of 2 and 1, and their bonding failure sites were cohesive within the composite.Conclusion:Cyclic loading, simulating occlusal forces, reduces the bond strength of both bonding systems. Even though the self-etch bonding system had lower shear bond strength than the total-etch system, both were still clinically acceptable.     

Eighteen-month bracket survival rate: conventional versus self-etch adhesive

The aim of this study was to evaluate, over an 18-month period, the clinical performance of a self-etch adhesive [Transbond Plus Self Etching Primer (SEP), 3M Unitek] compared with a conventional adhesive that employs the etch-and-rinse approach (Transbond XT, 3M Unitek). One operator, using the straight-wire technique, bonded 567 metallic brackets to the teeth of 30 patients (age range 12-18 years) in a way that patients acted as self-control. The brackets were bonded following the manufacturers' instructions except for the fact that the self-etch system was brushed for a longer time than recommended (10-15 seconds) since previous investigations have reported that prolonged application times can improve the bonding efficacy of self-etch systems to enamel. The failure modes were visually classified into: adhesive-enamel, adhesive-bracket, and cohesive failure. The survival rates of the brackets were estimated by Kaplan-Meier and log-rank test (P < 0.05). The failure rates of the self-etch and conventional adhesives were 15.6 and 17.6 per cent, respectively. No significant differences in the survival rate were observed between the materials (P > 0.05). Most of the failures were cohesive and at the adhesive-enamel interface. There was no difference in the fracture debonding mode. These findings indicate that Transbond Plus SEP can be safely used for orthodontic brackets since the survival rates are similar to the conventional Transbond XT.     

Effect of enamel protective agents on shear bond strength of orthodontic brackets

Background

This paper aimed to study the effect of two enamel protective agents on the shear bond strength (SBS) of orthodontic brackets bonded with conventional and self-etching primer (SEP) adhesive systems.

Methods

The two protective agents used were resin infiltrate (ICON) and Clinpro; the two adhesive systems used were self-etching primer system (Transbond Plus Self Etching Primer + Transbond XT adhesive) and a conventional adhesive system (37% phosphoric acid etch + Transbond XT primer + Transbond XT adhesive ). Sixty premolars divided into three major groups and six subgroups were included. The shear bond strength was tested 72 h after bracket bonding. Adhesive remnant index scores (ARI) were assessed. Statistical analysis consisted of a one-way ANOVA for the SBS and Kruskal-Wallis test followed by Mann-Whitney test for the ARI scores.

Results

In the control group, the mean SBS when using the conventional adhesive was 21.1 ± 7.5 MPa while when using SEP was 20.2 ± 4.0 MPa. When ICON was used with the conventional adhesive system, the SBS was 20.2 ± 5.6 MPa while with SEP was 17.6 ± 4.1 MPa. When Clinpro was used with the conventional adhesive system, the SBS was 24.3 ± 7.6 MPa while with SEP was 11.2 ± 3.5 MPa. Significant differences in the shear bond strength of the different groups (P = .000) was found as well as in the ARI scores distribution (P = .000).

Conclusion

The type of the adhesive system used to bond the orthodontic brackets, either conventional or self-etching primer, influenced the SBS, while the enamel protective material influenced the adhesive remnant on the enamel surface after debonding.     

A novel biomimetic orthodontic bonding agent helps prevent white spot lesions adjacent to brackets

Objective:To compare changes in enamel microhardness adjacent to orthodontic brackets after using bonding agents containing various compositions of bioactive glass compared to a traditional resin adhesive following a simulated caries challenge.Materials and Methods:Extracted human third molars (n  =  10 per group) had orthodontic brackets bonded using one of four novel bioactive glass (BAG)-containing orthodontic bonding agents (BAG-Bonds) or commercially available Transbond-XT. The four new adhesives contained BAG in varying percentages incorporated into a traditional resin monomer mixture. Teeth were cycled through low-pH demineralizing and physiologic-pH remineralizing solutions once each day over 14 days. Microhardness was measured on longitudinal sections of the teeth 100, 200, and 300 µm from the bracket edge and beneath the brackets, at depths of 25 to 200 µm from the enamel surface. Normalized hardness values were compared using three-way analysis of variance.Results:Significantly less reduction in enamel microhardness was found with the experimental adhesives at depths of 25 and 50 µm at all distances from the bracket edge. In all groups, there were no significant changes in enamel microhardness past 125-µm depth. Results varied with the different BAG-Bonds, with 81BAG-Bond showing the smallest decrease in enamel microhardness.Conclusions:The BAG-Bonds tested in this study showed a reduction in the amount of superficial enamel softening surrounding orthodontic brackets compared to a traditional bonding agent. The results indicate that clinically, BAG-Bonds may aid in maintaining enamel surface hardness, therefore helping prevent white spot lesions adjacent to orthodontic brackets.     

Bracket bond strength comparison between new unfilled experimental self-etching primer adhesive and conventional filled adhesives

Objective:To determine if a new unfilled experimental self-etching primer (SEP) adhesive system (SBP-40TX + C&B Metabond) that incorporates a methyl methacrylate–based 4-META/TBB (4-methacryloxyethyl trimellitate anhydride tri-n-butyl borane) resin can provide adequate shear bond strength (SBS) when used for bonding orthodontic brackets.Methods and Materials:Forty-eight human maxillary premolars were randomly divided into three groups of 16 specimens each. Brackets were bonded with three bonding systems. A filled Bis-GMA/TEGDM (triethylene glycol dimethacrylate)–based SEP adhesive system (Transbond Plus) and an unfilled conventional etch-and-rinse adhesive system (C&B Metabond) were used for comparison. The SBS for each sample was examined with a universal testing machine, and the Adhesive Remnant Index score was calculated. Enamel surfaces after conditioning were examined using a scanning electron microscope. Data were compared by one-way analysis of variance and a χ² test.Results:The experimental SEP showed a milder etching pattern than Transbond Plus SEP. No statistically significant differences in the mean SBS were found between the specimens bonded with the unfilled experimental SEP adhesive system (10.0 MPa) and the filled SEP adhesive system (8.7 MPa). The unfilled experimental SEP adhesive system showed less residual adhesive than the filled SEP adhesive system.Conclusions:The unfilled experimental SEP adhesive system showed a clinically sufficient SBS that was equivalent to the filled SEP adhesive system.     

Influence of filler addition,storage medium and evaluation time on biaxial flexure strength and modulus of adhesive systems

Abstract

Objective. This study evaluated the effects of filler addition, storage medium and time on biaxial flexural strength and flexural modulus of six adhesive systems. Materials and methods. The adhesives were either unfilled resins: Single Bond, Prime&Bond 2.1 and One-Step; or filled resins: Single Bond Plus, Prime&Bond NT and One-Step Plus. Resin discs of each product (0.5 mm thick × 6.0 mm diameter) were prepared using silicon molds (n = 10). The discs were stored dry, in water, mineral oil or ethanol for 1 week or 3 months before biaxial flexural testing. Data were statistically analyzed by 3-way ANOVA and Tukey's post-hoc test (α = 0.05). The specimens were tested in a universal testing machine at 1.27 mm/min until failure occurred. Results. In general, the storage in ethanol led to significantly lower flexural strength and flexural modulus values than the other storage conditions for all adhesives in both storage periods. Filler addition increased flexural strength and flexural modulus for Prime&Bond NT, when it was stored dry or in water for 1 week. For Single Bond Plus, the filler addition resulted in higher flexural modulus, when it was stored for 1 week in oil and in ethanol. No significant differences in flexural modulus were observed between One-Step and One-Step Plus in any storage medium. Conclusions. Results suggested that filler addition does not necessarily have to increase the flexural strength and flexural modulus. Ethanol and oil storages tended to yield opposite effects.     

Impact of ZrO2 nanoparticles addition on flexural properties of denture base resin with different thickness

PURPOSEThis study aimed to evaluate the effect of incorporating zirconium oxide nanoparticles (nano-ZrO₂) in polymethylmethacrylate (PMMA) denture base resin on flexural properties at different material thicknesses.MATERIALS AND METHODSHeat polymerized acrylic resin specimens (N = 120) were fabricated and divided into 4 groups according to denture base thickness (2.5 mm, 2.0 mm, 1.5 mm, 1.0 mm). Each group was subdivided into 3 subgroups (n = 10) according to nano-ZrO₂ concentration (0%, 2.5%, and 5%). Flexural strength and elastic modulus were evaluated using a three-point bending test. One-way ANOVA, Tukey''s post hoc, and two-way ANOVA were used for data analysis (α = .05). Scanning electron microscopy (SEM) was used for fracture surface analysis and nanoparticles distributions.RESULTSGroups with 0% nano-ZrO₂ showed no significant difference in the flexural strength as thickness decreased (P = .153). The addition of nano-zirconia significantly increased the flexural strength (P < .001). The highest value was with 5% nano-ZrO₂ and 2 mm-thickness (125.4 ± 18.3 MPa), followed by 5% nano-ZrO₂ and 1.5 mm-thickness (110.3 ± 8.5 MPa). Moreover, the effect of various concentration levels on elastic modulus was statistically significant for 2 mm thickness (P = .001), but the combined effect of thickness and concentration on elastic modulus was insignificant (P = .10).CONCLUSIONReinforcement of denture base material with nano-ZrO₂ significantly increased flexural strength and modulus of elasticity. Reducing material thickness did not decrease flexural strength when nano-ZrO₂ was incorporated. In clinical practice, when low thickness of denture base material is indicated, PMMA/nano-ZrO₂ could be used with minimum acceptable thickness of 1.5 mm.     

Effects of surface treatment and artificial aging on the shear bond strength of orthodontic brackets bonded to four different provisional restorations

Objective:To evaluate the combined effects of material type, surface treatment, and thermocycling on the bond strength of orthodontic brackets to materials used for the fabrication of provisional crowns.Materials and Methods:Four materials were included in this study (ProTemp, Trim Plus, Trim II, and Superpont C+B). Sixty cylindrical specimens (1 × 3 cm) were prepared from each material and equally divided into three groups. The first group was ground with silica carbide paper, the second was polished with pumice, and the last group was sandblasted with 50-µm aluminum oxide particles. Stainless-steel maxillary central incisor brackets (Victory Series, 3M) were bonded to the provisional material specimens with Transbond XT light-cured composite resin, and half of the specimens from each group were thermocycled 500 times in 5°C and 55°C water baths. Then the brackets were debonded with shear testing, and the results were statistically analyzed by three-way analysis of variance and Tukey''s multiple-comparison tests at α  =  0.05. Adhesive Remnant Index (ARI) was also identified.Results:Before and after thermocycling, ProTemp materials showed the highest shear bond strength with orthodontic brackets (10.3 and 13.1 MPa, respectively). The statistical analysis indicated an interaction among the three independent variables (P < .05) and statistically significant differences in bond strength among provisional materials (P < .001), surface treatments (P < .001), and thermocycling (P < .05). According to the ARI, most groups demonstrated adhesive failure.Conclusions:The provisional material type, surface treatment, and artificial aging have a significant effect on bond strength. Sandblasting treatment exerts a beneficial effect on shear bond strength.     

Influence of topical fluoride application on mechanical properties of orthodontic bonding materials under pH cycling

Objective:To evaluate in vitro the influence of topical fluoride application on the mechanical properties of orthodontic cements containing fluoride under pH cycling conditions.Materials and Methods:Edgewise brackets for maxillary central incisors were bonded to 192 bovine incisors using Transbond XT (G1), Transbond Plus Color Change (G2), and Fuji Ortho LC (G3) (n  =  64 for each group). The specimens of each group were subdivided (n  =  16) into different subgroups. Subgroup A received no topical fluoride application during pH cycling, while the experimental subgroups received topical fluoride treatments as follows: B, application three times per day of fluoride dentifrice (1450 ppm F); C, application one time per day of fluoride mouth rinse (250 ppm F); and D, combination of fluoride dentifrice and fluoride mouth rinse. After 14 days of pH cycling, the shear bond strength and Adhesive Remnant Index were evaluated statistically.Results:Polarized light microscopy showed that pH cycling induced mineral loss in all specimens. The topical application of fluoride did not have an influence on shear bond strength, although the association of fluoride dentifrice and mouth rinse increased the shear bond strength of the resinous cement without fluoride (P < .01). Regarding the Adhesive Remnant Index, no statistical differences were found within the groups G1 (P  =  .23), G2 (P  =  .47), and G3 (P  =  .74).Conclusion:Topical fluoride treatments improved the shear bond strength of resinous cement, regardless of the material''s fluoride-releasing capacity, and reached the adhesive fractures.     

Effects of different etching methods and bonding procedures on shear bond strength of orthodontic metal brackets applied to different CAD/CAM ceramic materials

Objective:To investigate the shear bond strength (SBS) of orthodontic metal brackets applied to different types of ceramic surfaces treated with different etching procedures and bonding agents.Materials and Methods:Monolithic CAD/CAM ceramic specimens (N = 120; n = 40 each group) of feldspathic ceramic Vita Mark II, resin nanoceramic Lava Ultimate, and hybrid ceramic Vita Enamic were fabricated (14 × 12 × 3 mm). Ceramic specimens were separated into four subgroups (n = 10) according to type of surface treatment and bonding onto the ceramic surface. Within each group, four subgroups were prepared by phosphoric acid, hydrofluoric acid, Transbond XT primer, and Clearfill Ceramic primer. Mandibular central incisor metal brackets were bonded with light-cure composite. The SBS data were analyzed using three-way analysis of variance (ANOVA) and Tukey HSD tests.Results:The highest SBS was found in the Vita Enamic group, which is a hybrid ceramic, etched with hydrofluoric acid and applied Transbond XT Adhesive primer (7.28 ± 2.49 MPa). The lowest SBS was found in the Lava Ultimate group, which is a resin nano-ceramic etched with hydrofluoric acid and applied Clearfill ceramic primer (2.20 ± 1.21 MPa).Conclusions:CAD/CAM material types and bonding procedures affected bond strength (P < .05), but the etching procedure did not (P > .05). The use of Transbond XT as a primer bonding agent resulted in higher SBS.     

In vitro evaluation of frictional force of a novel elastic bendable orthodontic wire

Objectives:To determine the frictional force (FF) of the novel, elastic, bendable titanium-niobium (Ti-Nb) alloy orthodontic wire in stainless steel (SS) brackets and to compare it with those of titanium-nickel (Ti-Ni) and titanium-molybdenum (Ti-Mo) alloy wires.Materials and Methods:Three sizes of Ti-Nb, Ti-Ni, and Ti-Mo alloy wires were ligated with elastic modules to 0.018-inch and 0.022-inch SS brackets. The dynamic FFs between the orthodontic wires and SS brackets were measured at three bracket-wire angles (0°, 5°, and 10°) with an Instron 5567 loading apparatus (Canton, Mass).Results:FFs increased gradually with the angle and wire size. In the 0.018-inch-slot bracket, the dynamic FFs of Ti-Nb and Ti-Ni alloy wires were almost the same, and those of the Ti-Mo alloy wire were significantly greater (P<0.05). FF values were 1.5–2 times greater in the 0.022-inch-slot bracket than in the 0.018-inch-slot bracket, regardless of alloy wire type, and the Ti-Mo alloy wire showed the greatest FF. Scanning electric microscopic images showed that the surface of the Ti-Mo alloy wire was much rougher than that of the Ti-Ni and Ti-Nb alloy wires.Conclusion:These findings demonstrate that the Ti-Nb alloy wire has almost the same frictional resistance as the Ti-Ni alloy wire, although it has a higher elastic modulus.     

Preventive effect of fluoridated orthodontic resins subjected to high cariogenic challenges

The aim of the present study was to evaluate the in vitro caries preventive effect of fluoridated orthodontic resins under pH cycling with two types of acid demineralizing saliva. Brackets were bonded to 60 bovine incisors, using either Transbond Plus Color Change (n=30) or Orthodontic Fill Magic (n=30) orthodontic resins. Each group of resin was divided into 3 subgroups (n=10): immersion in remineralizing artificial saliva for 14 days, pH cycling with high cariogenic challenge in acid saliva with pH 5.5, and acid saliva with pH 4.5. After 14 days of pH cycling, the caries preventive effect on the development of white spot lesion was evaluated considering the presence of inhibition zones to white spot lesions using two scores: 0= absence and 1= presence. Kruskal Wallis and Mann-Whitney tests (a=0.05) were used. Formation of white spot lesions was observed only under pH cycling using acid saliva with pH 4.5; with Transbond Plus Color Change being significantly more effective (p<0.05) in preventing the appearance of white spot lesions effect than Orthodontic Fill Magic. The acidity of the demineralizing solution influenced the formation of white spot lesions around orthodontic brackets under highly cariogenic conditions. Transbond Plus Color Change resin presented higher caries preventive effect than Orthodontic Fill Magic.     

The relationship between personality traits,pain perception and attitude toward orthodontic treatment

Objective:To investigate the relationship between personality traits and a person''s attitude toward orthodontic treatment and perception of pain during orthodontic treatment.Materials and Methods:The sample consisted of two groups: group 1 consisted of 200 untreated subjects (100 males, 100 females; average age, 21.50 ± 3.35 years), and group 2 consisted of 200 treated subjects (100 males, 100 females; average age, 20.92 ± 2.48 years). The instrument for data collection was a questionnaire that included assessment of patients'' personality profiles, pain expectation for untreated subjects, pain experience for treated subjects, and attitudes toward orthodontic treatment.Results:Gender, treatment status, and personality traits did not affect subjects'' average attitude toward orthodontic treatment, whereas gender was the only variable that affected subjects'' average pain perception (P < .01). The average attitude score in subjects who experienced pain during orthodontic treatment was 5.06 ± 1.43, compared to 4.32 ± 1.35 for subjects who did not experience pain (P < .001). The average pain perception scores in treated subjects with previous knowledge of orthodontic treatment was 5.29 ± 1.94, compared to 6.07 ± 1.95 in subjects who did not have previous knowledge of orthodontic treatment (P < .01).Conclusions:Personality traits did not affect attitude toward orthodontic treatment and pain perception/experience during orthodontic treatment. A more positive attitude was found in patients who experienced less pain during orthodontic treatment.     

Effect of luting materials,presence of tooth preparation,and functional loading on stress distribution on ceramic laminate veneers: A finite element analysis

Statement of problemHow the polymerization shrinkage, loading, and mechanical properties of luting materials affect the shrinkage and functional stresses in ceramic laminate veneers (CLVs) with and without tooth preparation is unclear.PurposeThe purpose of this finite element analysis (FEA) study was to evaluate the effect of the polymerization shrinkage, functional loading, and mechanical properties of different luting materials on the stresses in ultrathin 0.3-mm CLVs with and without tooth preparation.Material and methodsThree resin cements, RelyX Veneer (RV), Allcem Veneer APS (AV), Variolink Esthetic LC (VE), and 1 flowable composite resin, Tetric N-Flow (TF), were tested for post-gel shrinkage (Shr), Knoop hardness (KHN), elastic modulus (E), compressive strength (CS), and diametral tensile strength (DTS). IPS e.max CAD disks of 0.3-mm thickness were made for simulating the effects of light attenuation. Eight 2-dimensional finite element models (Marc-Mentat) of a maxillary central incisor were generated to evaluate the polymerization shrinkage stress of different materials for luting 0.3-mm CLVs with or without tooth preparation and the stress during functional loading by using a modified von Mises criterion (mvm). Collected data from Shr, KHN, and E were submitted to 2-way ANOVA and the Tukey HSD test (α=.05).ResultsLight attenuation by the 0.3-mm ceramic disk did not significantly affect the E values, but Shr was significantly lower in VE (26%) and TF (35%). TF had lower volumetric Shr (%) when interposing a ceramic disk (0.31%). Both tested tooth preparation options showed similar stress distributions from polymerization shrinkage or functional loading, with higher stress concentration on the incisal edge and also on the cervical surface. The model featuring tooth preparation and RV resin cement had the highest and VE the lowest stress levels.ConclusionsThe flowable composite resin had similar mechanical properties as the resin cements. The stress distribution from shrinkage and functional loading was similar for both techniques with or without tooth preparation.     

Caries infiltrant combined with conventional adhesives for sealing sound enamel in vitro

Objective:To test the null hypothesis that combining low-viscosity caries infiltrant with conventional adhesive resins would not improve sealing of sound enamel against demineralization in vitro.Materials and Methods:Bovine enamel discs (N  =  60) with diameter of 3 mm were randomly assigned to six groups (n  =  10). The discs were etched with 37% phosphoric acid for 30 seconds and treated with resins of different monomer content forming the following groups: (1) Icon (DMG), (2) Transbond XT Primer (3M ESPE), (3) Heliobond (Ivoclar Vivadent), (4) Icon + Transbond XT Primer, and (5) Icon + Heliobond. Untreated etched samples served as the negative control. Specimens were subjected to demineralization by immersion in hydrochloric acid (pH 2.6) for 80 hours. Calcium dissolution into the acid was assessed by colorimetric analysis using Arsenazo III method at 16-hour intervals. Groups presenting high protection against demineralization were subjected to further acidic challenge for 15 days with calcium measurements repeated at 24-hour intervals. Data were analyzed by Kruskal-Wallis test and Mann-Whitney U-test.Results:Untreated specimens showed the highest amount of demineralization. Icon and Transbond XT primer decreased the mineral loss significantly compared to the control. Heliobond performed significantly better than both Icon and Transbond XT primer. Combination of Icon both with Transbond XT primer or Heliobond served as the best protective measures and maintained the protective effect for the additional 15-day acidic challenge.Conclusions:Within the limitations of this in vitro study, it could be concluded that the use of low-viscosity caries infiltrant prior to application of the tested conventional adhesives increases their protective effect against demineralization.     

Tooth color change due to different etching and debonding procedures

Objectives:To compare the effects of different etching techniques, 12–, 24–bladed tungsten carbide burs, and polishing discs on tooth color changes during orthodontic treatment.Materials and Methods:59 individuals (mean age: 15.20 ± 1.59 years) were divided into four groups: 37% phosphoric acid and adhesive primer was used in Groups I and II whereas self–etch primer was used in Groups III and IV for enamel preparation. After orthodontic treatment, residual adhesives were cleaned with 12–bladed tungsten carbide burs in Groups I and III, while 24–bladed tungsten carbide burs were used in Groups II and IV. All teeth were polished with medium and fine Sof–Lex XT discs (3M ESPE, St Paul, Minnesota). Color measurements were taken from upper incisors and canines at pretreatment (T0), after cleaning with tungsten carbide burs (T1) and polishing with discs (T2). Wilcoxon test was used for evaluation of L*, a*, b* changes and Kruskal–Wallis for intergroup comparison of color changes.Results:L*, a*, b* values, except a* at Groups I, II, IV, and b* at Group III, changed significantly (P < .05). Groups III and IV showed significantly different color alterations from T0 to T1 (P < .05). After polishing, tooth color alterations were not significantly different among the groups.Conclusions:In self–etch bonding groups, a 12–bladed tungsten carbide bur caused less color change than the 24–bladed tungsten carbide bur. Orthodontic treatment resulted with visible and clinically unacceptable tooth color alterations regardless of the enamel preparation and clean–up techniques. Polishing reduced the effect of tungsten carbide burs, but did not affect the total influence of orthodontic treatment on the tooth color.     

Long-term effects of seven cleaning methods on light transmittance,surface roughness,and flexural modulus of polyurethane retainer material

Objectives: To evaluate the long-term effects of seven different cleaning methods on light transmittance, surface roughness, and flexural modulus of a polyurethane retainer material.Materials and Methods: Polyurethane retainer specimens (Vivera®, Align Technology Inc) (70 specimens, n = 10 per method, 50.8 mm × 12.7 mm × 1.0 mm) were exposed to seven cleaning methods twice a week for 6 months. Before treatment and after 6 months, light transmittance, surface roughness, and flexural modulus of the specimens were quantified. Qualitative assessment of randomly selected specimens from each solution was performed at baseline and after 6 months using a scanning electron microscope. Statistical analyses were performed at the .05 significance level.Results: Of the three test variables, light transmittance through the specimens was the only one that changed significantly from baseline to 6 months for all cleaning solutions, with all of them causing a decrease. However, except for 0.6% sodium hypochlorite showing a change in surface roughness values and 2.5% vinegar and toothbrushing showing an increase in flexural modulus, none of the other four cleaning methods resulted in significant changes in surface roughness or flexural modulus values for the polyurethane specimens between baseline and after 6 months.Conclusions: Of the seven cleaning methods, Invisalign® cleaning crystals, Polident®, and Listerine® showed the least amount of change in light transmittance values for the polyurethane specimens over 6 months, and they had no effect on surface roughness and flexural modulus values.     

Shear bond strength of brackets bonded with hydrophilic and hydrophobic bond systems under contamination

Objective:To compare, in vitro, the shear bond strength (SBS) of two bond systems: Transbond XT/XT primer (TXT/XT) and Transbond Plus Color Change/Transbond Self Etching Primer (TPCC/TSEP).Materials and Methods:Each system was examined under four enamel surface conditions (dry, water, saliva, and blood), and 160 bovine teeth were divided into eight groups of 20 according to enamel surface condition. Group 1 used TPCC/TSEP and Group 2 used TXT/XT under dry conditions; Group 3 used TPCC/TSEP and Group 4 used TXT/XT with water; Group 5 used TPCC/TSEP and Group 6 used TXT/XT under saliva; and Group 7 used TPCC/TSEP and Group 8 used TXT/XT with blood. Brackets were bonded, and the samples were thermocycled 500 times between 5°C and 55°C; they were then submitted to a shear bond test with a universal testing machine with a 50 kgf load cell at 5 mm/min.Results:Although water and saliva affected TXT/XT more than they affected TPCC/TSEP, there were no significant differences among the groups (Groups 3 and 4: P  =  .940; Groups 3 and 5 and Groups 4 and 6: P  =  1.000; Groups 3 and 6: P  =  .988; Groups 4 and 5: P  =  .690; and Groups 5 and 6: P  =  .861).Conclusions:The presence of blood resulted in the lowest SBS from both bond systems, but especially from TXT/XT. TPCC/TSEP resulted in a higher SBS than TXT/XT under all conditions except the dry enamel surface.