Nanostructured Lipid Carriers (NLC)-Based Gel for the Topical Delivery of Aceclofenac: Preparation, Characterization, and In Vivo Evaluation

The aim of this study was to prepare nanostructured lipid carriers (NLC)-based topical gel of aceclofenac for the treatment of inflammation and allied conditions. Stearic acid as the solid lipid, oleic acid as the liquid lipid, pluronic F68 as the surfactant, and phospholipon 90G as the co-surfactant were used. NLCs were prepared by melt-emulsification, low-temperature solidification, and high-speed homogenization methods. Characterization of the NLC dispersion was carried out through particle size analysis, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and an in vitro release study. The anti-inflammatory effect of the NLC gel was assessed by the rat paw edema technique and compared to marketed aceclofenac gel. The NLC dispersions exhibited d_90% between 233 nm and 286 nm. All of the NLC showed high entrapment efficiency ranging from 67% to 82%. The particle size of NLC was further confirmed by the SEM study. The result of DSC showed that aceclofenac was dispersed in NLC in an amorphous state. Both the entrapment and release rate were affected by the percentage of oleic acid, but the method of preparation affected only the entrapment efficiency. The nanoparticulate dispersion was suitably gelled and assessed for in vitro permeation. Finally, NLC-based gels were found to possess superior (almost double) the anti-inflammatory activity compared to the marketed product. The anti-inflammatory activity of NLC gel showed a rapid onset of action, as well as a prolonged duration of action as compared with the marketed gel.     

The effects of particle properties on nanoparticle drug retention and release in dynamic minoxidil foams

Nanocarriers may act as useful tools to deliver therapeutic agents to the skin. However, balancing the drug–particle interactions; to ensure adequate drug loading, with the drug–vehicle interactions; to allow efficient drug release, presents a significant challenge using traditional semi-solid vehicles. The aim of this study was to determine how the physicochemical properties of nanoparticles influenced minoxidil release pre and post dose application when formulated as a simple aqueous suspension compared to dynamic hydrofluoroalkane (HFA) foams. Minoxidil loaded lipid nanoparticles (LN, 1.4 mg/ml, 50 nm) and polymeric nanoparticles with a lipid core (PN, 0.6 mg/ml, 260 nm) were produced and suspended in water to produce the aqueous suspensions. These aqueous suspensions were emulsified with HFA using pluronic surfactant to generate the foams. Approximately 60% of the minoxidil loaded into the PN and 80% of the minoxidil loaded into the LN was released into the external aqueous phase 24 h after production. Drug permeation was superior from the PN, i.e. it was the particle that retained the most drugs, irrespective of the formulation method. Premature drug release, i.e. during storage, resulted in the performance of the topical formulation being dictated by the thermodynamic activity of the solubilised drug not the particle properties.     

Passive and active strategies for transdermal delivery using co-encapsulating nanostructured lipid carriers: In vitro vs. in vivo studies

This work aimed at designing a formulation based on nanostructured lipid carriers (NLC) for transdermal co-administration of olanzapine and simvastatin, using passive and active strategies in a combined in vitro/in vivo development approach. NLC were prepared by two distinct methods, namely solvent emulsification–evaporation (SE/E) and high pressure homogenization (HPH). HPH was selected on the basis of a better performance in terms of drug loading and in vitro permeation rate. Several mathematical models were used to elucidate the release mechanisms from lipid nanoparticles. In vitro release kinetics was shown to be driven by diffusion, but other mechanisms were also present, and supported the feasibility of using NLC for sustained drug delivery. The in vitro skin studies showed that the chemical penetration enhancers, limonene and ethanol, added to the NLC formulations, promoted a synergistic permeation enhancement of both drugs, with olanzapine exhibiting a higher permeation than simvastatin. Transdermal administration to rats resulted in steady-state levels reached at around 10 h and maintained for 48 h, again with olanzapine exhibiting a better permeation rate. The pharmacokinetic parameters indicated that the NLC dispersion displayed a better in vivo performance than the gel, which was consistent with the in vitro results. These differences were, however, negligible in the flux values, supporting the use of gel as a final, more convenient, formulation. The in vivo experiments in rats correlated well with in vitro findings and revealed that the combined use of ethanol and limonene, incorporated in the NLC formulation, provided the main driving force for drug permeation. The Dermaroller® pretreatment did not significantly enhance drug permeation, supporting the use of passive methods as suitable for a transdermal delivery system. Furthermore, this work may provide a promising proof-of-concept for further clinical application in the treatment of schizophrenia and associated disorders, combined with dyslipidemia.     

Nanosized ethosomes bearing ketoprofen for improved transdermal delivery

The potential of ethosomes for delivering ketoprofen via skin was evaluated. The ethosomes were prepared, optimized and characterized. Vesicular shape, size and entrapment efficiency were determined by transmission electron microscopy, dynamic light scattering and minicolumn centrifugation technique, respectively. Vesicle sizes varied from 120.3±6.1 to 410.2±21.8 nm depending on the concentrations of soya phosphatidyl choline (SPC) and ethanol. Entrapment efficiency increased with concentrations of SPC and ethanol. The formulations exhibited entrapment efficiencies of 42–78%. In vitro release through cellophane membrane showed sustained release of drug from ethosomal formulations in contrast to hydroalcoholic drug solution (HA), which released most of the drug within 2–3 h. In vitro drug permeation across human skin revealed improved drug permeation and higher transdermal flux with ethosomal formulations compared to hydroethanolic drug solution. Kinetics of in vitro skin permeation showed zero order drug release from formulations. Based on in vitro transdermal flux, the estimated steady state in vivo plasma concentration from ethosomes attained therapeutic drug levels whereas hydroalcoholic drug solution exhibited sub therapeutic drug concentration with a patch size of 50 cm². Skin permeation of ethosomal formulations assessed by confocal microscopy revealed enhanced permeation of Rhodamine 123 loaded formulation in comparison to the hydroalcoholic solution.     

Brain specific delivery of pegylated indinavir submicron lipid emulsions

The aim of this study was to develop stable parenteral pegylated indinavir submicron lipid emulsions (SLEs) for improving brain specific delivery. The O/W SLEs were prepared by homogenization and ultra sonication process. The sizes of oil globules varied from 241.5 to 296.4 nm and zeta potential from ?26.6 to ?42.4 mV. During in vitro drug release studies the cumulative amount of drug released within 12 h from SLE-5, DSP2-3 and DPP5-3 was 71.8 ± 0.76, 66.09 ± 1.45 and 68.33 ± 1.29, respectively. The total drug content and entrapment efficiencies were determined. The optimized formulations were stable for the effect of centrifugal stress, thermal stress, dilution stress and storage. In vivo pharmacokinetic and tissue distribution studies were performed in Swiss albino mice, the therapeutic availability (TA) of DSP2-3 was 3.59 times and 2.36 times in comparison to drug solution and SLE-5 respectively, where as DPP5-3 showed TA 2.8 and 1.84 times the drug solution and SLE-5, respectively. The brain to serum ratio of indinavir from DSP2-3 and DPP5-3 varied between 0.4 and 0.7 at all time points indicated the preferential accumulation of drug in brain. In conclusion, pegylated SLEs improved brain specific delivery of indinavir and will be useful in treating chronic HIV infection.     

Antidermatitic Perspective of Hydrocortisone as Chitosan Nanocarriers: An Ex Vivo and In Vivo Assessment Using an NC/Nga Mouse Model

The aim of this study to administer hydrocortisone (HC) percutaneously in the form of polymeric nanoparticles (NPs) to alleviate its transcutaneous absorption, and to derive additional wound-healing benefits of chitosan. HC-loaded NPs had varied particle sizes, zeta potentials, and entrapment efficiencies, when drug-to-polymer mass ratios increased from 1:1 to 1:8. Ex vivo permeation analysis showed that the nanoparticulate formulation of HC significantly reduced corresponding flux [~24 μg/(cm² h)] and permeation coefficient (~4.8 × 10^? 3 cm/h) of HC across the full thickness NC/Nga mouse skin. The nanoparticulate formulation also exhibited a higher epidermal (1610 ± 42 μg/g of skin) and dermal (910 ± 46 μg/g of skin) accumulation of HC than those associated with control groups. An in vivo assessment using an NC/Nga mouse model further revealed that mice treated with the nanoparticulate system efficiently controlled transepidermal water loss [15 ± 2 g/(m² h)], erythema intensity (232 ± 12), dermatitis index (mild), and thickness of skin (456 ± 27 μm). Taken together, histopathological examination predicted that the nanoparticulate system showed a proficient anti-inflammatory and antifibrotic activity against atopic dermatitic (AD) lesions. Our results strongly suggest that HC-loaded NPs have promising potential for topical/transdermal delivery of glucocorticoids in the treatment of AD. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 102:1063–1075, 2013     

Principles of rational design of thermally targeted liposomes for local drug delivery

Drug release from 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) liposomes occurs close to the main transition temperature T_m = 41 °C. The exact release temperature can be adjusted by additional lipids, which shift T_m. A major issue is drug leakage at 37 °C. We here describe a novel approach with improved drug retention yet rapid release. To obtain spherical, smooth liposomes we included: i) 2 mol% cholesterol, to soften bilayers (Lemmich et al 1997), ii) lipids, which due to their spontaneous curvature stabilize the negative and positive curvatures of the inner and outer leaflets of unilamellar liposomes. In addition to differential scanning calorimetry (DSC) and fluorescence spectroscopy, the lipid mixtures were analyzed by a Langmuir balance for their elastic properties and lipid packing, aiming at high elasticity modulus C_S^− 1. Maxima in C_S^− 1 coincided with minima in the free energy of lateral mixing. These liposomes have reduced drug leakage, yet retain rapid release.From the Clinical EditorThis paper reports the development of optimized DPPC liposomes for drug delivery, with reduced drug leakage but maintained rapid release.     

Novel dual-reverse thermosensitive solid lipid nanoparticle-loaded hydrogel for rectal administration of flurbiprofen with improved bioavailability and reduced initial burst effect

The purpose of this study was to develop novel solid lipid nanoparticle (SLN)-loaded dual-reverse thermosensitive hydrogel (DRTH) for rectal administration of flurbiprofen with improved bioavailability and reduced initial burst effect. The flurbiprofen-loaded SLNs were prepared by hot homogenisation technique, after optimising the amounts of lipid mixture (tricaprin and triethanolamine in 8:2 weight ratio), drug and surfactant. The flurbiprofen-loaded thermosensitive SLN composed of drug, lipid mixture and surfactant at a weight ratio of 10/15/1.3 was a solid at room temperature, and changed to liquid form at physiological temperature due to its melting point of about 32 °C. This SLN gave the mean particle size of about 190 nm and entrapment efficiency of around 90%. The DRTHs were prepared by adding this flurbiprofen-loaded thermosensitive SLN in various poloxamer solutions. Their rheological characterisation, release and stability were investigated while a morphological and pharmacokinetic study was performed after its rectal administration to rats compared with the drug and hydrogel. Poloxamer 188 and SLN decreased the gelation temperature and gelation time, but increased the viscosity at 25 °C, gel strength and mucoadhesive force of DRTHs. In particular, the DRTH composed of [SLN/P 407/P 188 (10%/15%/25%)] with the gelation temperature of about 35 °C existed as liquid at room temperature, but gelled at 30–36 °C, leading to opposite reversible property of SLN. Thus, it was easy to administer rectally, and it gelled rapidly inside the body. This DRTH gave a significantly increased dissolution rate of the drug as compared to the flurbiprofen, but significantly retarded as compared to the hydrogel, including the initial dissolution rate. Moreover, this DRTH gave significantly higher plasma concentration and 7.5-fold AUC values compared to the drug, and lower initial plasma concentration and C_max value compared to the hydrogel due to reduced initial burst effect. No damage in rectal mucosa was observed after the application of DRTH. Thus, this DRTH system with improved bioavailability and reduced initial burst effect would be recommended as an alternative for the flurbiprofen-loaded rectal pharmaceutical products.     

Development and statistical optimization of nefopam hydrochloride loaded nanospheres for neuropathic pain using Box–Behnken design

Nefopam hydrochloride (NFH) is a non-opioid centrally acting analgesic drug used to treat chronic condition such as neuropathic pain. In current research, sustained release nefopam hydrochloride loaded nanospheres (NFH-NS) were auspiciously synthesized using binary mixture of eudragit RL 100 and RS 100 with sorbitan monooleate as surfactant by quasi solvent diffusion technique and optimized by 3⁵ Box–Behnken designs to evaluate the effects of process and formulation variables. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetric (DSC) and X-ray diffraction (XRD) affirmed absence of drug–polymer incompatibility and confirmed formation of nanospheres. Desirability function scrutinized by design-expert software for optimized formulation was 0.920. Optimized batch of NFH-NS had mean particle size 328.36 nm ± 2.23, % entrapment efficiency (% EE) 84.97 ± 1.23, % process yield 83.60 ± 1.31 and % drug loading (% DL) 21.41 ± 0.89. Dynamic light scattering (DLS), zeta potential analysis and scanning electron microscopy (SEM) validated size, charge and shape of nanospheres, respectively. In-vitro drug release study revealed biphasic release pattern from optimized nanospheres. Korsmeyer Peppas found excellent kinetics model with release exponent less than 0.45. Chronic constricted injury (CCI) model of optimized NFH-NS in Wistar rats produced significant difference in neuropathic pain behavior (p < 0.05) as compared to free NFH over 10 h indicating sustained action. Long term and accelerated stability testing of optimized NFH-NS revealed degradation rate constant 1.695 × 10⁻⁴ and shelf-life 621 days at 25 ± 2 °C/60% ± 5% RH.     

Characterizing users of new psychoactive substances using psychometric scales for risk-related behavior

IntroductionStudies investigating risk-related behavior in relation to new psychoactive substance (NPS) use are sparse. The current study investigated characteristics of NPS users by comparing risk-related behavior of NPS users to that of illicit drugs (ID) users and licit substances users and non-users (NLC) users.MethodsIn this cross-sectional study we included 528 individuals across an age range of 18–72 years. Using a web-based questionnaire we collected self-report data on substance use, sensation seeking, impulsivity, peer substance use and risk perception of substance use.ResultsNPS and ID users had a higher level of sensation seeking compared to NLC users (NPS users: p < 0.001; ID users: p < 0.001). NPS users (p < 0.001), but not ID users (p = 0.16), had increased levels of impulsivity compared to NLC users. NPS users had significantly higher scores for sensation seeking (F_1,423 = 51.52, p < 0.001) and impulsivity (F_1,423 = 6.15, p = 0.01) compared to ID users. Additionally, NPS users had significantly more peers who use substances compared to ID and NLC users. Also, NPS and ID users had lower risk perception for most substances than NLC users. NPS users had lower risk perception for most substances than ID users.ConclusionsThe findings highlight that NPS users show substantial more risk-related behavior than both ID and NLC users. Therefore, NPS users might be considered as a distinctive group of substance users that need another approach in terms of prevention.     

Formulation,optimization and evaluation of transferosomal gel for transdermal insulin delivery

The present study deals with the development of transferosomal gel containing insulin by reverse phase evaporation method for painless insulin delivery for use in the treatment of insulin dependent diabetes mellitus. The effect of independent process variables like ratio of lipids (soya lecithin:cholesterol), ratio of lipids and surfactants, and ratio of surfactants (Tween 80:sodium deoxycholate) on the in vitro permeation flux (μg/cm²/h) of formulated transferosomal gels containing insulin through porcine ear skin was optimized using 2³ factorial design. The optimal permeation flux was achieved as 13.50 ± 0.22 μg/cm²/h with drug entrapment efficiency of 56.55 ± 0.37% and average vesicle diameter range, 625–815 nm. The in vitro insulin permeation through porcine ear skin from these transferosomal gel followed zero-order kinetics (R² = 0.9232–0.9989) over a period of 24 h with case-II transport mechanism. The in vitro skin permeation of insulin from optimized transferosomal gel by iontophoretic influence (with 0.5 mA/cm² current supply) also provided further enhancement of permeation flux to 17.60 ± 0.03 μg/cm²/h. The in vivo study of optimized transferosomal gel in alloxan-induced diabetic rat has demonstrated prolonged hypoglycemic effect in diabetic rats over 24 h after transdermal administration.     

Release of Prednisolone and Inulin from a New Calcium-Alginate Chitosan-Coated Matrix System for Colonic Delivery

Putative colonic release formulations of calcium (Ca)-alginate coated with chitosan containing two different actives, prednisolone and inulin, were prepared in three different sizes, beads (D₅₀ = 2104 μm) and microparticles (D₅₀ = 354 and 136 μm). The formulations were tested in standard phosphate buffer and biorelevant Krebs bicarbonate buffer at pH 7.4, and were further evaluated in the presence of the bacterium E. coli. Product yield and encapsulation were higher with prednisolone than with inulin. In Krebs bicarbonate buffer, a clear relationship between particle size and prednisolone release was observed. In contrast, release of inulin was independent of the particle size. In phosphate buffer, the particles eroded quickly, whereas in Krebs buffer, the particles swelled slowly. The difference in behavior can be attributed to the formation of calcium phosphate in the phosphate buffer medium, which in turn weakens the Ca-alginate matrix core. In the presence of E. coli, the formulations were fermented and the release of prednisolone was accelerated. In conclusion, the buffer media affects formulation behavior and drug release, with the bicarbonate media providing a better simulation of in vivo behavior. Moreover, the susceptibility of the formulations to bacterial action indicates their suitability as carriers for colonic drug delivery.     

Bioactive Apigenin loaded oral nano bilosomes: Formulation optimization to preclinical assessment

AimDiabetic (type-2) is a metabolic disease characterized by increased blood glucose level from the normal level. In the present study, apigenin (AG) loaded lipid vesicles (bilosomes: BIL) was prepared, optimized and evaluated for the oral therapeutic efficacy.ExperimentalAG-BIL was prepared by a thin-film evaporation method using cholesterol, span 60 and sodium deoxycholate. The prepared formulation was optimized by 3-factor and 3-level Box-Behnken design using particle size, entrapment efficiency and drug release as a response. The selected formulation further evaluated for ex-vivo permeation, in vivo pharmacokinetic and pharmacodynamics study.ResultsThe optimized AG bilosomes (AG-BILopt) has shown the vesicle size 183.25 ± 2.43 nm, entrapment efficiency 81.67 ± 4.87%. TEM image showed a spherical shape vesicle with sharp boundaries. The drug release study revealed a significant enhancement in AG release (79.45 ± 4.18%) from AG-BILopt as compared to free AG-dispersion (25.47 ± 3.64%). The permeation and pharmacokinetic studies result revealed 4.49 times higher flux and 4.67 folds higher AUC_0-t than free AG-dispersion. The antidiabetic activity results showed significant (P < 0.05) enhancement in therapeutic efficacy than free AG-dispersion. The results also showed marked improvement in biochemical parameters.ConclusionOur findings suggested, the prepared apigenin loaded bilosomes was found to be an efficient delivery in the therapeutic efficacy in diabetes.     

Formulation Design and Optimization for the Improvement of Nystatin-Loaded Lipid Intravenous Emulsion

Nystatin (NYS) is a polyene macrolide with broad antifungal spectrum restricted to topical use owing to its toxicity upon systemic administration. The aims of this work were the design, development, and optimization of NYS-loaded lipid emulsion for intravenous administration. A closed circuit system was designed to apply ultrasound during the elaboration of the lipid intravenous emulsions (LIEs). Additionally, a comparison with the commercially available Intralipid® 20% was also performed. Manufacturing conditions were optimized by factorial design. Formulations were evaluated in terms of physicochemical parameters, stability, release profile, and antimicrobial activity. The average droplet size, polydispersity index, zeta-potential, pH, and volume distribution values ranged between 192.5 and 143.0 nm, 0.170 and 0.135, ? 46 and ? 44 mV, 7.11 and 7.53, 580 and 670 nm, respectively. The selected NYS-loaded LIE (NYS-LIE54) consisted of soybean oil (30%), soybean lecithin (2%), solutol HS® 15 (4%), and glycerol (2.25%) was stable for at least 60 days. In vitro drug release studies of this formulation suggested a sustained-release profile. Equally, NYS-LIE54 showed the best antimicrobial activity being higher than the free drug. Thus, it could be a promising drug delivery system to treat systemic fungal infections.     

Floating matrix dosage form for dextromethorphan hydrobromide based on gas forming technique: In vitro and in vivo evaluation in healthy volunteers

The objective of this study was to develop the dextromethorphan hydrobromide sustained-release (DMB-SR) tablets using floating technique to prolong the gastric residence time and compared their pharmacokinetic behavior with conventional sustained release tablets. DMB-SR floating tablets were prepared employing hydroxypropyl methylcellulose (HPMC) as hydrophilic gel material, sodium bicarbonate as gas-generating agent and hexadecanol as floating assistant agent. An orthogonal experiment design method was used to select the optimized formulation. The floating tablets were evaluated for uniformity of weight, hardness, friability, drug content, floating characteristics, in vitro release and in vivo bioavailability. The optimized tablets were prepared with HPMC K4M 25 mg, sodium bicarbonate 20 mg and hexadecanol 18 mg. The prepared tablets could float within 3 min and maintain for more than 24 h. The data of physical parameters were all lie within the limits. Drug release at 12 h was more than 85%. The comparative pharmacokinetic study was performed by administration of the DMB-SR floating tablets and conventional DMB-SR tablets. The area under curve of plasma concentration–time (AUC) of floating tablets was slightly higher than that of reference tablets, T_max was prolonged apparently. The results showed the floating tablets are a feasible approach for the sustained-release preparation of drugs, which have limited absorption sites in the stomach.     

Ultrasound-mediated destabilization and drug release from liposomes comprising dioleoylphosphatidylethanolamine

Novel sonosensitive doxorubicin-containing liposomes comprising dioleoylphosphatidylethanolamine (DOPE) as the main lipid constituent were developed and characterized in terms of ultrasound-mediated drug release in vitro. The liposome formulation showed high sonosensitivity; where approximately 95% doxorubicin was released from liposomes after 6 min of 40 kHz US exposure in buffered sucrose solution. This represented a 30% increase in release extent in absolute terms compared to liposomes comprising the saturated lipid analogue distearoylphosphatidylethanolamine (DSPE), and a 9-fold improvement in release extent when compared to standard pegylated liposomal doxorubicin, respectively. Ultrasound release experiments in the presence of serum showed a significantly reduction in sonosensitivity of DSPE-based liposomes, whilst the release properties of DOPE-based liposomes were essentially maintained. Dynamic light scattering measurements and cryo-transmission electron microscopy of DOPE-based liposomes after ultrasound treatment indicated liposome disruption and formation of various lipid structures, corroborating the high release extent. The results point to the potential of DOPE-based liposomes as a new class of drug carriers for ultrasound-mediated drug delivery.     

Novel pH-Sensitive Lipid-Polymer Composite Microspheres of 10-Hydroxycamptothecin Exhibiting Colon-Specific Biodistribution and Reduced Systemic Absorption

Novel lipid-polymer composite microspheres (LP-MS) were prepared by combining pH-sensitive polymer Eudragit S100 with solid lipid Compritol 888 ATO for colonic delivery of 10-hydroxycamptothecin (HCPT), and pH-dependent controlled drug release has been achieved. The colon-specific biodistribution and uptake by the mucosal tissue were examined using coumarin-6-marked LP-MS. It is proved that good in vitro-in vivo relationship has been achieved, with more drugs being delivered to colon and a higher drug level was maintained for a long period. Moreover, in vivo bioavailability of LP-MS was evaluated with conventional enteric microspheres (enteric MS) as reference. After administration of LP-MS, systemic absorption of HCPT was greatly reduced, with area under the curve from 0 to 24 h (AUC_0 -24h, 2.186 ± 0.27) being significantly lower than that of enteric MS group (6.352 ± 0.696). In conclusion, the novel pH-sensitive LP-MS has potential for colon-specific drug delivery.     

Development of sustained release antipsychotic tablets using novel polysaccharide isolated from Delonix regia seeds and its pharmacokinetic studies

A natural polysaccharide was isolated from the seeds of Delonix regia. The isolated polysaccharide could maintain aqueous equilibrium between the dosage form and the surrounding medium due to its massive competence of water absorption (80.72%) and swelling index (266.7%). The Scanning Electron Micrograph of a polysaccharide exhibits rough surface with pores and crevices, hence, the drug release will be retarded because of the drug particles entrapment in the pores and crevices. Further, the surface tension of polysaccharide is higher than that of water, which may facilitate sustained release of drugs from dosage forms. An antipsychotic drug, quetiapine fumarate has a short half-life of 6 h and administered multiple times per day. Hence the quetiapine fumarate oral sustained release tablets were formulated using this polysaccharide in the concentration of 5–30% to avoid the side effects and increase patient compliance. Dissolution of the developed tablets with 25% polysaccharide content showed a better release profile than the other batches (5–20%) at the end of 12 h. The strong matrix complex has low solubility in water, it does not dissolve rapidly and the drug continues to diffuse through the gel layer at a consistent rate. Drug release from the matrix tablets follows matrix type except F-4 and F-5 which follow first order and Hix.crow type. The bioavailability study was carried out using healthy male New Zealand white rabbits that show the AUC_(0–inf) value for developed SR tablets is 1.44 times higher than the reference thus, indicating more efficient and sustained drug delivery capable of maintaining plasma drug levels better.     

Gastroretentive hydrodynamically balanced systems of ofloxacin: In vitro evaluation

Hydrodynamically balanced systems (HBSs) of ofloxacin were prepared using lactose, HPMC K4M, PVP K 30, and liquid paraffin, which may increase the mean residence time in the gastrointestinal tract, and may be able to provide maximum drug at the site of absorption to improve oral bioavailability. All these formulated HBS capsules were floated well over 6 h with no floating lag time. They also showed sustained drug release over 6 h. Time for 50% release of ofloxacin was within the range, 2.47 ± 0.02 to 3.07 ± 0.08 h. The in vitro drug release from these HBS capsules was dependent on HPMC K4M, PVP K 30, and liquid paraffin content. The drug release pattern of these HBS capsules containing ofloxacin followed the Higuchi model with the anomalous transport mechanism.     

Immunological evaluation of colonic delivered Hepatitis B surface antigen loaded TLR-4 agonist modified solid fat nanoparticles

Hepatitis B is one of the leading liver diseases and remains a major global health problem. Currently available vaccines provide protection but often results in weaker/minimal mucosal immunity. Thus the present study is devoted to the development and in-vivo exploration of the colonically delivered biomimetic nanoparticles which capably enhance humoral as well as cellular immune response. In present work, Hepatitis B surface antigen (HBsAg) entrapped nanoparticles containing Monophosphoryl lipid A (MPLA) (HB + L-NP) were prepared by solvent evaporation method and characterized for particle size (~ 210 nm), shape, zeta potential (− 24 mV ± 0.68), entrapment efficiency (58.45 ± 1.68%), in-vitro release and antigen integrity. Dose escalation study was done to confirm prophylactic immune response following defined doses of prepared nanoparticulate formulations with or without MPLA. Intramuscular administered alum based marketed HBsAg (Genevac B) was used as standard (10 μg) and were able to induce significant systemic (IgG) but remarkably low mucosal immune (IgA) response. Notably, HB + L-NP (0.5 ml–10 μg) induced strong systemic and robust mucosal immunity (510 and 470 mIU/ml respectively, p < 0.001) from which mucosal was more significant due to the involvement of Common Mucosal Immune System (CMIS). Likewise, significant cellular immune response was elicited by HB + L-NP through T-cell activation (mixed Th1 and Th2) as confirmed by significantly increased cytokines level (IL-2 and Interferon-γ) in spleen homogenates. This study supports that delivery of HBsAg to the colon may open new vista in designing oral vaccines later being one of most accepted route for potential vaccines in future.