Analisi della morfologia radicolare e canalare di molari superiori ed inferiori in una popolazione Caucasica: studio in vivo alla CBCT

AimTo investigate the root and canal morphology of maxillary and mandibular permanent molar teeth in a Caucasian population by using Cone Beam Computed Tomography (CBCT).MethodsA total of 596 permanent molars were included. The number of roots, the number of canals per root and the root canal configurations according to the method of Vertucci were recorded.ResultsAlmost all of maxillary first molars (95.7%) had three separate roots; however, 40.3% of mesiobuccal roots had two canals (MB2). Of 157 maxillary second molars, 88.5% had three roots. Among the mesiobuccal roots, 15.1% had two canals. The majority of mandibular molars (100% of first molars, 89.4% of second molars) had two separate roots. Most distal roots had a simple type I configuration, whereas mesial roots had more complex canal systems, with more than one canal.ConclusionsCBCT is an efficient method of studying root canal systems.     

Symmetry of Root and Root Canal Morphology of Maxillary and Mandibular Molars in a White Population: A Cone-beam Computed Tomography Study In Vivo

Introduction

The aim of the present study was to use cone-beam computed tomography (CBCT) to analyze root canal anatomy and symmetry of maxillary and mandibular first and second molar teeth of a white population.

Methods

A total of 201 patients who required CBCT examinations as part of their dental diagnosis and treatment were enrolled in the present study. Overall, 596 healthy, untreated, well-developed maxillary and mandibular molar teeth (161 maxillary first molars, 157 maxillary second molars, 117 mandibular first molars, and 161 mandibular second molars) were examined by CBCT to establish the symmetry in root and canal anatomy between right and left sides in the same patient by evaluating the number of roots and root canals and the root canal configuration.

Results

Three separate roots with 3 separate canals was the normal anatomy of maxillary first and second molars. Most mandibular first and second molars had 2 separate roots, and the majority had 3 canals. In the present study, first molars, both maxillary and mandibular, exhibited greater asymmetry than the second molars. Maxillary first molars were found to be symmetrical in 71.1% of patients, whereas maxillary second molars were symmetrical in 79.6%. The remaining 28.9% and 20.4% of patients, respectively, showed asymmetry. Around 30% of the mandibular first molars and 20% of the mandibular second molars showed asymmetry.

Conclusions

The results of the present study reported a percentage of symmetry that varied from 70%–81%. These variations in symmetry should be taken in high consideration when treating 2 opposite molars in the same patient, because their anatomy may be different in up to 30% of the cases.     

Evaluation of root canal morphology of human primary molars by using CBCT and comprehensive review of the literature

Objective Knowledge of primary tooth morphology is essential for clinical dentistry, especially for root canal treatment and dental traumatology. However, this has not been well documented to date with a large sample. This study was carried out to investigate the variation in number and morphology of the root canals of the primary molars, to study the applicability of cone beam computerized tomography (CBCT) in assessing the same and to provide a comprehensive review of the literature. Materials and methods A total of 343 primary molars, without any root resorption, were divided into four main groups including the maxillary first molars, maxillary second molars, mandibular first molars and mandibular second molars. All of them were analysed in CBCT images in the axial, sagittal and coronal planes. Various parameters such as the number of roots, number of canals, the root canal type, diameter of root and root canal and root canal curvature were studied. Results Primary molars in all four groups showed variability in the number of roots and root canals. As far as length of the roots was concerned, the palatal root of the maxillary molar was found to be longest, while the distobuccal root was shortest. In mandibular molars, the mesial root was longer than the distal root. The length of distobuccal root canal of the maxillary molars and the distolingual canal of the mandibular molars was found to be shortest. The number of roots and root canals varied from two to four and three to four, respectively. The maxillary molars exhibited more one-canal than two-canal roots. Conclusion The present study provides comprehensive information to the existing literature concerning the variation in root canal morphology of the maxillary and mandibular primary molar teeth. These data may help clinicians in the root canal treatment of these teeth.     

新疆地区人群上颌第二磨牙牙根和根管形态的CBCT研究

目的 采用锥形束CT研究新疆地区人群上颌第二磨牙的牙根和根管形态，为本地区口腔临床诊疗提供参考依据。方法 对纳入研究的539例新疆地区人群的上颌第二磨牙，利用CBCT对其牙根形态、数目，根管形态、数目和弯曲度，牙冠颊舌径和近远中径以及对称性进行观察、分析和统计。结果 在1017颗上颌第二磨牙中，三根牙的检出率最高为85.2%，四根牙检出率最低为3.2%，不同牙位和性别在牙根形态上的分布存在统计学差异；MB2的检出率与年龄无统计学差异；56岁及以上年龄组的四根牙检出率最高。颊舌径、近远中径的平均测量值越大，其对应的根管数目越多。上颌第二磨牙的牙根数目和形态对称、根管形态及四种特征均对称方面较高，上颌第二磨牙近颊根管和远颊根管68%为重度弯曲，弯曲位于根中1/3较多。结论 新疆地区人群上颌第二磨牙以三根牙为主，对称率较高，弯曲程度大，但存在一些牙根和根管的变异，临床上可以运用CBCT来指导诊疗。     

Evaluation of Root Canal Configuration of Maxillary Molars in a Brazilian Population Using Cone-beam Computed Tomographic Imaging: An In Vivo Study

Introduction

The aim of this study was to analyze and characterize root canal morphology of maxillary molars of the Brazilian population using cone-beam computed tomographic (CBCT) imaging.

Methods

Patients referred for a CBCT radiographic examination for accurate diagnosis and treatment planning were enrolled in the study. A total of 620 healthy, untreated, fully developed maxillary first and second molars were included (314 first molars and 306 second molars). The following observations were recorded: (1) number of roots and their morphology, (2) number of canals per root, (3) fused roots, and (4) primary variations in the morphology of the root canal systems.

Results

First and second molars showed a higher prevalence of 3 separate roots, mesiobuccal, distobuccal, and palatal, with 1 canal in each root (52.87% and 45.09%, respectively). Two canals in the mesiobuccal roots represented 42.63% of teeth, whereas mesiobuccal roots of second molars presented 2 canals in 34.32%. The most common anatomic variation in the maxillary first molar was related to the root canal configuration of the mesiobuccal root, whereas the root canal system of the maxillary second molar teeth showed more anatomic variables.

Conclusions

Mesiobuccal roots of maxillary molar teeth had more variation in their canal system than the distobuccal or palatal roots. The root canal configuration of the maxillary second molars was more variable than the first molars in a Brazilian population. CBCT imaging is a clinically useful tool for endodontic diagnosis and treatment planning.     

Root canal morphology of maxillary second molars in a Saudi sub-population: A cone beam computed tomography study

IntroductionRoot morphology and canal anatomy of maxillary molars shows several complexities and variations. Knowledge of these is essential for successful endodontic treatment. This study aimed to investigate the morphology of the maxillary second molars in a Saudi Arabian sub-population in relation to gender, age, and nationality, as well as to analyze the anatomical symmetry between the left and right side in each individual.Methodology420 digitized cone-beam computed tomography (CBCT) scans were collected, of which 351 scans met the inclusion criteria. Number of roots and canals at three different levels of the root in each case was counted at all available sides and compared on the basis of the study variables. Statistical significance was set at P ≤ 0.05.ResultsMost of the patients (n = 323, 92%) had three roots, while two roots (n = 23, 6.6%), four roots (n = 4, 1.1%), and one root (n = 1, 0.3%) were less frequently observed. A significant correlation between female patients and the presence of two canals, while male patients showed a higher correlation with the presence of four canals at all levels. There also was a correlation between Saudi participants and the presence of four canals at all levels. No significant correlation in symmetry between the left and right side root canal anatomy was found. There was an inverse relation between the number of canals and age.ConclusionConsidering the limitations in this study, it appears that the Saudi population is more likely to have three- and two-rooted maxillary second molars, with males and females showing greater tendencies to having three and two roots, respectively.     

A cone-beam computed tomography study of root canal morphology of maxillary and mandibular premolars in a Turkish population

Aim. The aim of this study was to evaluate the root canal number and configuration of maxillary and mandibular premolar teeth by gender, intervals for decades, tooth position and unilateral or bilateral occurrence in a Turkish population using Cone Beam Computed Tomography(CBCT) scanning. Methodology. CBCT images of 5496 maxillary and mandibular premolars from 849 patients were evaluated. The following was evaluated in all the images: numbers of roots and root canals, the morphology of the root canal configuration according to the Vertucci classification, male–female differences in the tooth position and male–female differences in unilateral or bilateral occurrence. The reliability data were analyzed with a chi-square test. Results. The most prevalent root canal frequency was the two canals (86.2%) and type IV (76.9%) configuration for maxillary first premolar, one canal (59.7%) and type I (54.5%) canal configuration for second premolar. The incidence of one canal was higher in females and the occurrence of two or three canals was more common in males. The incidence of one canal was higher on the left side of maxillary premolars and the incidence of two canals was higher on the right side. Most mandibular first (93.5%) and second (98.5%) premolars had one canal. In general, females had one root canal of the mandibular premolar, whereas males had two or three canals. The type I configuration was most common and the incidence was higher on the right side. There were some differences found in the frequency distribution of the number of root canals and configuration of maxillary and mandibular premolar teeth according to intervals for decades. Conclusion. CBCT scanning provides comprehensive information about the root canal morphology of maxillary and mandibular premolar teeth. These data may help clinicians in root canal treatment of premolar teeth.     

Symmetry of root anatomy and root canal morphology in maxillary premolars analyzed using cone-beam computed tomography

ObjectiveThis study aimed to use cone-beam computed tomography (CBCT) to evaluate the root anatomy and canal morphology of maxillary premolars in a Chinese population and determine their degree of bilateral symmetry.Design774 CBCT images were retrospectively analyzed, representing 1387 maxillary first premolars and 1403 second premolars. The number of roots and canals were recorded. The morphology of root canal systems was determined according to Vertucci’s classification. The symmetry of root and canal anatomies between maxillary contralateral premolars was further evaluated.ResultsThe most common anatomy of maxillary first and second premolars was one-rooted with two canals (58.0%) and one-rooted with one canal (50.3%), respectively. The typical canal morphology was type IV (42.7%) in maxillary first premolars and type I (50.3%) in maxillary second premolars. One-rooted maxillary premolars exhibited a higher variability in the canal morphology, compared to two-rooted or three-rooted teeth. Maxillary second premolars exhibited greater anatomic symmetry than first premolars. The root and canal numbers showed bilateral symmetry between 80.2% of maxillary first premolar pairs and 81.8% of second premolar pairs. Bilateral symmetry in both number and morphology of roots and canals was observed for 72.3% of maxillary first premolar pairs and 73.2% of second premolar pairs.ConclusionThe root anatomy and canal morphology of maxillary premolars in a Chinese population were quite diversified. Maxillary contralateral premolars demonstrated a high degree of symmetry in root and canal anatomies, which enables practitioners to better determine the nature of the root canal system during treatment of opposite homonymous teeth.     

上颌第一、第二恒磨牙牙根和根管系统的锥形束CT研究

目的：运用锥形束CT（CBCT）观察中国人群双侧上颌第一、第二磨牙的牙根和根管系统的解剖形态,为临床根管治疗提供依据。方法：选择200名患者的双侧上颌第一、第二恒磨牙（上颌第一恒磨牙354颗、上颌第二恒磨牙360颗）的CBCT扫描数据,使用NNT软件分析上颌第一、第二恒磨牙的牙根数、根管数、根管分型以及双侧对称情况。结果：上颌第一、第二磨牙主要为三根（99.44%和84.44%）。上颌第二磨牙的单根和双根较多见（15.28%）,其根管系统形态复杂,在根尖区有融合趋势。上颌第一磨牙的根管系统主要为3根四根管（78.97%）。上颌第二磨牙的三根管和四根管发现率接近（分别为47.37%和51.64%）。上颌第一磨牙的近颊根管系统主要根管分型为：Ⅳ型（57.79%）、Ⅱ型（19.83%）和Ⅰ型（15.58%）。上颌第二磨牙的近颊根管系统主要根管分型为：Ⅰ型（48.14%）、Ⅳ型（30.43%）和Ⅱ型（17.39%）。上颌第一、第二磨牙的远颊根和腭根主要为单根单根管,存在少量和罕见的变异。上颌第一、第二磨牙近颊根的根管数目和根管分型左右对称。结论：上颌第一磨牙近颊根管系统变异普遍存在,MB2根管为其主要的变异形式。上颌第二磨牙牙根数目和根管形态变异类型多,单根牙和双根牙的根管走向复杂多变。CBCT可以为识别根管形态提供准确依据。     

Association between Endodontically Treated Maxillary and Mandibular Molars with Fused Roots and Periapical Lesions: A Cone-beam Computed Tomography Cross-sectional Study

IntroductionFused root variations of the root canal system increase the complexity of the inner root canal system anatomy. The aim of the present study was to determine, in in vivo conditions, the proportion of periapical lesions in association with endodontically treated maxillary and mandibular molars with fused roots presenting previous root canal treatment by assessing preexisting data via cone-beam computed tomographic volumes.MethodsA total of 1160 CBCT scans with an overall sample of 20,836 teeth were screened. A global count of 3701 maxillary molars and mandibular second molars were included in the study. The Cohen kappa test and interclass correlation coefficient tested the intra- and interrater reliability, respectively. The percentage of periapical lesions associated with molars with or without root fusion was determined. Proportions were expressed with 95% confidence intervals (CIs). The z test for proportions was used to analyze differences between subgroups, and an odds ratio was calculated in order to understand the association between periapical lesions and root configuration.ResultsFused molars presented a prevalence of periapical lesions in endodontically treated teeth of 74.0% (95% CI, 65.2%–82.8%), whereas nonfused molars had a proportion of periapical lesions in root canal–treated teeth of 69.5% (95% CI, 65.2%–73.8%; P > .05). Endodontically treated molars with fused roots presented with 1.3 higher odds of being associated with periapical lesions than endodontically treated molars with nonfused roots.ConclusionsA tendency of a higher proportion of periapical lesions was found in the fused rooted molars with a history of root canal treatment when compared with nonfused teeth; however, no statistically significant difference was noted.     

Root and root canal morphology of permanent mandibular first and second molars in a Kuwaiti population: A retrospective cone-beam computed tomography study

AimEndodontic diseases typically affect the mandibular molars. Understanding the complex morphology of the root canal system and its variations is necessary for successful endodontic treatment. The aim of this study was to evaluate the morphology of roots and root canals of mandibular first and second permanent molar teeth in a Kuwaiti population using cone-beam computed tomography (CBCT).Materials and methodsCBCT images of 651 mandibular first and second molar teeth were obtained from specialist government dental centers. The age, sex, root canal configuration, and number and type of roots were recorded. The data were statistically analyzed.ResultsThe most common canal configuration in the mandibular first and second molars was type II (65.6% and 54.4%, respectively), with no significant difference seen between the sexes (p = 0.234). The canal configuration was significantly different between the mandibular first and second molars (p < 0.001). Most teeth had two roots (94.5%); split roots were common (92.6%) and the number thereof varied significantly. Radicular grooves were most common on the lingual side (4.9%). C-shaped canals were present in 43 (6.60%) teeth. Additionally, one tooth had a confluent middle mesial canal and nine (1.4%) had radix entomolaris.ConclusionMandibular molars in our Kuwaiti population typically had two split roots with type II and IV canal configurations. The prevalence rates of C-shaped canals, middle mesial canals, and radix entomolaris were remarkably low.     

Analysis of Fused Rooted Maxillary First and Second Molars with Merged and C-shaped Canal Configurations: Prevalence,Characteristics, and Correlations in a Saudi Arabian Population

IntroductionThe aims of this in vivo cone-beam computed tomographic (CBCT) study were to evaluate the prevalence, characteristics, and correlations between the fused rooted maxillary first and second molars as well as their consequent merged and C-shaped canals in a Saudi Arabian population.MethodsCBCT imaging of 726 maxillary first and second molars from 208 subjects of Saudi origin were evaluated in the present study. The prevalence of fused rooted maxillary molars, merged canals, C-shaped configurations, and correlations between the presence of fused rooted teeth between first and second molars were examined as the primary outcome. Differences by sex, location in the jaw, and bilateral symmetry (similarity between right- and left-side teeth in the same patient) were evaluated as the secondary outcome. The Z test was used for differences in the independent proportions, the chi-square test was used for differences between sex and locations, and the Cohen kappa test was used for bilateral symmetry. The kappa test was also used for intrarater reliability. A value of P < .05 was considered significant.ResultsThe prevalence of fused rooted maxillary first and second molars was 7% and 21%, respectively. Within fused rooted teeth, the presence of merged canals was 8.3% and 32.1%, whereas the prevalence of C-shaped canals was 8.3% and 5.1% in first and second maxillary molars, respectively. Among 57 subjects who had fused rooted maxillary molars, 19.3% showed a correlation between first and second molars. In fused rooted maxillary molars, 3.8% first molars and 13% second molars were bilaterally symmetrical. There were no statistically significant differences between sexes and right- and left-sided fused rooted maxillary molars, merged canals, or C-shaped canals.ConclusionsMaxillary second molars presented more complex external and internal morphology compared with maxillary first molars, with an overall prevalence of 14% of fused rooted maxillary molars and 3.7% merged and 0.8% C-shaped canal configurations for all maxillary molars. The clinician should be aware of such challenges, and for a better treatment outcome, the use of CBCT imaging (small field of view) and an operative dental microscope can be considered when a preoperative periapical radiograph shows signs of fused rooted maxillary molars.     

Root and canal morphology of Thai mandibular molars

AIM: To investigate the root and canal morphology of 351 mandibular permanent molars collected from an indigenous Thai population. METHODOLOGY: The cleaned teeth were accessed, the pulp dissolved by sodium hypochlorite under ultrasonication and the pulp system injected with Indian ink. The teeth were rendered clear by demineralization and immersion in methyl salicylate. The following observations were made: (i) number of roots and their morphology; (ii) number of root canals per tooth; (iii) number of root canals per root; (iv) root canal configuration in each root using Vertucci's classification, with additional modifications; and (v) presence and location of lateral canals and intercanal communications. RESULTS: Of 118 mandibular first molars, 13% had a third disto-lingual root. In three-rooted teeth, 80% of the main distal roots and 100% of the disto-lingual roots had type 1 canal systems. Of 60 mandibular second molars, 10% had C-shaped roots, the majority of which had type 1 (33%) or type IV (33%) canal systems. Of 173 third molars, 68% had two separate roots, 20% had fused roots and 11% had a single C-shaped root; the majority had two canals (61%). CONCLUSIONS: This study suggests that Thai molars exhibit features of both Caucasian and Chinese teeth.     

Root and canal morphology of mandibular first and second molar teeth in a Jordanian population

Aim  To examine the root and canal morphology of mandibular permanent first and second molar teeth in a Jordanian population.
Methodology  A total of 685 extracted mandibular first and second permanent molar teeth were collected from dental clinics within north Jordan. The teeth were examined visually and the root number and morphology were recorded. After that, access cavities were prepared, pulp tissue dissolved by sodium hypochlorite and the root canals injected with Indian ink. Stained teeth were decalcified with 10% nitric acid, dehydrated with ascending concentrations of alcohol and rendered clear by immersion in methyl salicylate. The following observations were evaluated: (i) number of canals per root; (ii) number of root canals per tooth; (iii) canal configuration in each root; (iv) number and location of lateral canals and (v) presence of intercanal communications.
Results  Of 330 mandibular first molars, the majority had three (48%) or four (46%) canals, whilst 4% had a third disto-lingual root. Of 355 mandibular second molars, 58% had three canals, 19% two and 17% had four canals, whilst 10% had C-shaped roots. The most prevalent canal configuration in the mesial root of both first (53%) and second (40%) molars was type IV, and in distal roots was type I (54% in first and 79% in second molars).
Conclusions  Jordanian mandibular first and second molar teeth exhibit features close to the average Caucasian root and canal morphology.     

CBCT法研究上颌第一磨牙根管形态

目的：探讨应用锥形束CT研究上颌第一磨牙牙根及根管形态的价值。方法选取70例患者83颗上颌第一磨牙的锥形束CT（cone beam computed tomogaphy,CBCT）影像,分析其牙根数目、根管数目及根管系统的解剖结构。参照Vertucci分类法对根管形态进行分类,统计近中颊根第二根管（the seconal mesiobuual canal, MB2）率。结果83颗上颌第一磨牙均为3个独立牙根,其中MB2的发生率为38.6%,近中颊根根管VertucciⅠ型（1?1）、Ⅳ型（2?2型）、Ⅱ型（2?1）、Ⅲ型（1?2?1）所占百分比分别为61.4%、18.1%、15.7%和4.8%。结论上颌第一磨牙根管系统复杂,CBCT影像可反映真实根管形态,为根管治疗提供参考。     

Use of cone-beam computed tomography to evaluate root and canal morphology of mandibular first and second molars in Turkish individuals

Objective: The aim of this study was to investigate the root and canal morphology of mandibular first and second molars in a Turkish population by using cone beam computed tomography (CBCT). Study design: CBCT images of mandibular first (n = 823) and second molar (n = 925) teeth from 605 Turkish patients were analyzed. The root canal configurations were classified according to the method of Vertucci. Results: The majority of mandibular molars (95.8% of first molars, 85.4% of second molars) had two separate roots; however, three roots were identified in 2.06% of first molars and 3.45% of second molars. C-shaped canals occurred 0.85% of first molars and 4.1% of second molars. Three canals were found in 79.9% of first molars and 72.8% of second molars. Most distal roots had a simple type I configuration, whereas mesial roots had more complex canal systems, with more than one canal. The most common root morphology of first and second molars is the two rooted morphology with three canals. Both the mesial and distal roots showed wide variations in canal anatomy with type IV and type I canal configuration predominating in the mesial and distal roots, respectively. Conclusion: Vertucci type I and IV canal configurations were the most prevalent in the distal and mesial roots, respectively, of both the mandibular first and second permanent molar teeth. Key words:Cone-beam CT, Turkish, mandibular molars, root and canal morphology.     

CBCT study of root and canal morphology of permanent mandibular incisors in a Chinese population

Objective. To evaluate root canal morphology of permanent mandibular incisor teeth in a Chinese population using cone-beam computed tomography (CBCT). Materials and methods. CBCT images of Chinese patients were collected and 1553 permanent mandibular incisors in the images were included. The following observations on the included teeth were to determine the number of roots, root morphology and canal configuration. The root canal configurations were classified. The effect of gender on the incidence of the second canal was investigated. Results. Of permanent mandibular incisors, 86.8% had a single root with single canal. Mandibular lateral incisors (17.5%) had a higher incidence of a second canal compared with mandibular central incisors (8.9%) (p = 0.000). A slightly higher percentage of incidence of a second canal was found in males (14.6%) than in females (11.9%) (p = 0.129). Conclusions. Permanent mandibular incisors with two canals had a relatively low incidence in this Chinese population. The incidence of a second canal did not differ between males and females. CBCT is a valuable aid during root canal treatment.     

上颌第二磨牙根管解剖形态的初步研究

目的: 利用透明牙技术和锥形束CT(cone-beam computed tomography, CBCT)体层扫描技术对上颌第二磨牙根管解剖形态进行研究, 比较CBCT对根管形态的识别与透明牙有无一致性。方法: 对50颗离体牙进行CBCT扫描, 数据导入用计算机软件, 根据Vertucci根管分型, 记录每颗离体牙每个牙根的根管分型。用改良根管染色技术对离体牙进行透明牙制作, 根据Vertucci分类, 将离体牙按每个牙根进行根管类型统计。采用SPSS17.0软件包对所得数据进行统计学处理。结果: 经过对透明牙的观察, 上颌第二磨牙远中颊根和腭根根管形态以Ⅰ型(1-1)为主, 发现新的根管分型(3-2-2)。近颊根的变异比较复杂, 主要以Ⅰ型居多(54.4%), Ⅱ型(2-1)、Ⅳ型(2-2)、Ⅴ型(1-2)和Ⅵ型(2-1-2)均有发生。近颊第二根管发生率为41.3%;经一致性检验, CBCT与透明牙在根管分型上具有一致性(P<0.001)。结论: 上颌第二磨牙根管解剖形态复杂, 尤其近颊根根管类型多变。CBCT与透明牙对根管的识别具有一致性, 其提供的三维影像技术对临床工作具有指导意义。     

Analysis of C-shaped Canals by Panoramic Radiography and Cone-beam Computed Tomography: Root-type Specificity by Longitudinal Distribution

Introduction

The purpose of this study was to document the characteristics of C-shaped canal systems in permanent mandibular second molars using a combination of orthopantomogram (OPT) and cross-sectional cone-beam computed tomographic (CBCT) imaging.

Methods

Two hundred participants (94 men and 106 women, mean age = 35 years) who underwent both routine CBCT and OPT examinations were enrolled. One endodontist and 1 oral radiologist examined the images of 339 mandibular second molars and described the radiographic features of C-shaped canals from OPT images as confirmed by CBCT imaging. Root morphology was classified as nonfused (NFRI–II) or fused (FRI–III) based on OPT images. Cross-sectional root canal configurations (C1–C5) were identified from CBCT imaging at 3 different levels (coronal, middle, and apical). Frequency distributions of root morphology and root canal configurations were compared at each level, and interobserver reliability was tested using the Cohen kappa test.

Results

Of the 339 teeth, 29 (8.6 %) had C-shaped root canal systems. Most of the root canals were NFR type (86%); only 2% had C-shaped root canals (all NFRII). In the FR category, 23 teeth with C-shaped canals were equally distributed between the FRI and FRII subtypes. Interobserver agreement was almost perfect (κ = 0.89 and κ = 0.91; right and left second molars, respectively). Per CBCT imaging, the most common configuration was C3 at all levels; no C5 case was detected.

Conclusions

OPT usage can assist in recognizing and diagnosing C-shaped root canal systems. Radicular fusion or proximity is a characteristic feature of C-shaped canal systems. However, nonfused root appearances should also be considered suspicious.     

Root and canal morphology of Thai maxillary molars

AIM: To investigate the root and canal morphology of 268 maxillary permanent molars collected from an indigenous Thai population. METHODOLOGY: The cleaned teeth were accessed, the pulp dissolved by sodium hypochlorite under ultrasonication, and the pulp system injected with Indian ink. The teeth were rendered clear by demineralization and immersion in methyl salicylate. The following observations were made: (i) number of roots and their morphology; (ii) number of root canals per root; (iii) root-canal configuration in each root using Vertucci's classification with additional modifications; and (iv) presence and location of lateral canals and intercanal communications. RESULTS: All the maxillary first and second molars had three separate roots. Only, half (51%) of the maxillary third molars had three separate roots; the other half had fused or conical roots. The majority of the distobuccal (98.1-100%) and palatal (100%) roots had type I canals. Over half of the mesiobuccal roots of first (65%) and second (55%) molars had two canals. The most common (44.2%) canal configuration in mesiobuccal roots of first molars was type IV (two canals, two foramina). A variety of canal types were found in the mesiobuccal roots of second molars. Maxillary third molars showed the greatest diversity of canal morphology. There was an increase in the prevalence of lateral canals towards the apical part of the roots and intercanal communications were present in 16% of each of first, second and third Thai maxillary molars. CONCLUSIONS: The mesiobuccal roots of Thai maxillary molars possessed a variety of canal system types. Over 50% of the first molars had a second mesiobuccal canal. The palatal and distobuccal canals mainly had type I canals. Only, a small proportion (7.3-13.3%) of the roots exhibited lateral canals which were the most common in the apical third