共查询到20条相似文献,搜索用时 31 毫秒
1.
Masataka Sakane Ross J. Fox Savio L-Y. Woo Glen A. Livesay Guoan Li Freddie H. Fu 《Journal of orthopaedic research》1997,15(2):285-293
The anterior cruciate ligament has a complex fiber anatomy and is not considered to be a uniform structure. Current anterior cruciate ligament reconstructions succeed in stabilizing the knee, but they neither fully restore normal knee kinematics nor reproduce normal ligament, function. To improve the outcome of the reconstruction, it may be necessary to reproduce the complex function of the intact anterior cruciate ligament in the replacement graft. We examined the in situ forces in nine human anterior cruciate ligaments as well as the force distribution between the anteromedial and posterolateral bundles of the ligament in response to applied anterioi tibial loads ranging from 22 to 110 N at knee flexion angles of 0–90°. The analysis was performed using a robotic manipulator in conjunction with a universal force-moment sensor. The in situ forces were determined with no device attached to the ligament, while the knee was permitted to move freely in response to the applied loads. We found that the in situ forces in the anterior cruciate ligament ranged from 12.8 ± 7.3 N under 22 N of anterior tibial load applied at 90° of knee flexion to 110.6 ± 14.8 N under 110 N of applied load at 15° of flexion. The magnitude of the in situ force in the posterolateral bundle was larger than that in the anteromedial bundle at knee flexion angles between 0 and 45°, reaching a maximum of 75.2 ± 18.3 N at 15° of knee flexion under an anterior tibial load of 110 N. The magnitude of the in situ force in the posterolateral bundle was significantly affected by knee flexion angle and anterior tibial load in a fashion remarkably similar to that seen in the anterior cruciate ligament. The magnitude of the in situ force in the anteromedial bundle, in contrast, remained relatively constant, not changing with flexion angle. Significant differences in the direction of the in situ force between the anteromedial bundle and the posterolateral bundle were found only at flexion angles of 0 and 60° and only under applied anterior tibial loads greater than 66 N. We have demonstrated the nonuniformity of the anterior cruciate ligament under unconstrained anterior tibial loads. Our data further suggest that in order for the anterior cruciate ligament replacement graft to reproduce the in situ forces of the normal anterior cruciate ligament, reconstruction techniques should take into account the role of the posterolateral bundle in addition to that of the anteromedial bundle. 相似文献
2.
Jürgen Hher Christopher D. Harner Tracy M. Vogrin Goo Hyun Baek Gregory J. Carlin Savio L-Y. Woo 《Journal of orthopaedic research》1998,16(6):675-681
The posterolateral structures of the knee consist of a complex anatomical architecture that includes several components with both static and dynamic functions. Injuries of the posterolateral structures occur frequently in conjunction with ruptures of the posterior cruciate ligament. To investigate the role of the posterolateral structures in maintaining posterior knee stability, we measured the in situ forces in the posterolateral structures and the distribution of force within the structures major components, i.e., the popliteus complex and the lateral collateral ligament, in response to a posterior tibial load. Eight cadaveric knees were tested. With use of a robotic/universal force-moment sensor testing system, a posterior tibial load of 110 N was applied to the knee, and the resulting five-degree-of-freedom kinematics were measured at flexion angles of 0, 30, 60, 75, and 90°. The knees were tested first in the intact state and then after the posterior cruciate ligament had been resected. These tests were also performed with an additional load of 44 N applied at the aponeurosis to simulate contraction of the popliteus muscle. In the intact knee, the in situ forces in the posterolateral structures were found to decrease with increasing knee flexion. After the posterior cruciate ligament was sectioned, these forces increased significantly at all angles of flexion. With no load applied to the popliteus muscle, the in situ forces in the popliteus complex were similar to those in the lateral collateral ligament. However, with a load of 44 N applied to the popliteus muscle, in situ forces in the popliteus complex were three to five, times higher than those in the lateral collateral ligament. These results reveal that in response to posterior tibial loads, the posterolateral structures play an important role at full extension in intact knees and at all angles of flexion in posterior cruciate ligament-deficient knees. The popliteus muscle appears to be a major stabilizer under this loading condition; thus, the inability to restore its function may be a cause of unsatisfactory results in reconstructive procedures of the posterolateral structures of the knee. 相似文献
3.
Guoan Li Theodore W. Rudy Christina Allen Masataka Sakane Savio L-Y. Woo 《Journal of orthopaedic research》1998,16(1):122-127
This study investigated the impact of a combination of axial compressive and anterior-posterior tibial loads on the in situ forces in the anterior cruciate ligament. An axial compressive load is believed to contribute to increased stability of the knee joint; however, its effect on in situ forces in the anterior cruciate ligament has not been clearly defined, to our knowledge. It was hypothesized that the application of an axial compressive load, when combined with an anterior tibial load, would result in larger in situ forces in the anterior cruciate ligament than those caused by an isolated anterior tibial load. With use of a porcine knee model, the results confirmed this hypothesis; the addition of a 200 N axial compressive load to a 100 N anterior tibial load increased knee stability by reducing anterior-posterior tibial translation and internal-external tibial rotation and also caused a significant increase in in situ forces in the anterior cruciate ligament (p < 0.05). Specifically, there was a 34% increase in the in situ force at 30° of flexion, a 68% increase at 60° of flexion, and an 84% increase at 90° of flexion compared with those for an isolated anterior tibial load of 100 N. Additionally, there was a statistically significant increase of the in situ forces in the anterior cruciate ligament at 60 and 90° as compared with those at 30°. These results suggest that axial compressive loads on the knee may play a role in injury of the anterior cruciate ligament when the knee is flexed. 相似文献
4.
5.
Keith L. Markolf Matthew J. Willems Steven R. Jackson Gerald A. M. Finerman 《Journal of orthopaedic research》1998,16(4):455-463
The goals of this study were to (a) evaluate the differential variable reluctance transducer as an instrument for measuring tissue strain in the anteromedial band of the anterior crudciate ligament, (b) develop a series of calibration curves (for simple states of knee loading) from which resultant force in the ligament could be estimated from measured strain levels in the anteromedial band of the ligament, and (c) study the effects of knee flexion angle and mode of applied loading on ouput from the transducer. Thirteen fresh-frozen cadaveric knee specimens underwent mechanical isolation of a bone cap containing the tibial insertion of the anterior cruciate ligament and attachment of a load cell to measure resultant force in the ligament. The transducer (with barbed prongs) was inserted into the anteromedial band of the anterior cruciate ligament to record local elongation of the instrumented fibers as resultant force was generated in the ligament. A series of calibration curves (anteromedial bundle strain versus resultant force in the anterior cruciate ligament) were determined at selected knee flexion angles as external loads were applied to the knee. During passive knee extension, strain readings did not always follow the pattern of resultant force in the ligament; erratic strain readings were often measured beyond 20° of flexion, where the anteromedial band was slack. For anterior tibial loading, the anteromedial band was a more active contributor to resultant ligament force beyond 45° of flexion and was less active near full extension; mean resultant forces in the range of 150–200 N produced strain levels on the order of 3–4%. The anteromedial band was also active during application of internal tibial torque; mean resultant forces on the order of 180–220 N produced strains on the order of 2%. Resultant forces generated by varus moment were relatively low, and the anteromedial band was not always strained. Mean coefficients of variation for resultant force in the ligament (five repeated measurements) ranged between 0.038 and 0.111. Mean coefficients of variation for five repeated placements of the strain transducer in the same site ranged from 0.209 to 0.342. Insertion and removal of this transducer at the anteromedial band produced observable damage to the ligament. In our study, repeatable measurements were possible only if both prongs of the transducer were sutured to the ligament fibers. 相似文献
6.
In-situ force in the medial and lateral structures of intact and ACL-deficient knees 总被引:4,自引:0,他引:4
Akihiro Kanamori Masataka Sakane Jennifer Zeminski Theodore W. Rudy Savio L-Y. Woo 《Journal of orthopaedic science》2000,5(6):567-571
The anterior cruciate ligament (ACL) is the major contributor to limit excessive anterior tibial translation (ATT) when the
knee is subjected to an anterior tibial load. However, the importance of the medial and lateral structures of the knee can
also play a significant role in resisting anterior tibial loads, especially in the event of an ACL injury. Therefore, the
objective of this study was to determine quantitatively the increase in the in-situ forces in the medial collateral ligament
(MCL) and posterolateral structures (PLS) of the knee associated with ACL deficiency. Eight fresh-frozen cadaveric human knees
were subjected to a 134-N anterior tibial load at full extension and at 15°, 30°, 60°, and 90° of knee flexion. The resulting
5 degrees of freedom kinematics were measured for the intact and the ACL-deficient knees. A robotic/universal force-moment
sensor testing system was used for this purpose, as well as to determine the in-situ force in the MCL and PLS in the intact
and ACL-deficient knees. For the intact knee, the in-situ forces in both the MCL and PLS were less than 20 N for all five
flexion angles tested. But in the ACL-deficient knee, the in-situ forces in the MCL and PLS, respectively, were approximately
two and five times as large as those in the intact knee (P < 0.05). The results of this study demonstrate that, although both the MCL and PLS play only a minor role in resisting anterior
tibial loads in the intact knee, they become significant after ACL injury.
Received: December 3, 1999 / Accepted: July 19, 2000 相似文献
7.
Hamstrings cocontraction reduces internal rotation, anterior translation, and anterior cruciate ligament load in weight-bearing flexion. 总被引:2,自引:0,他引:2
B A MacWilliams D R Wilson J D DesJardins J Romero E Y Chao 《Journal of orthopaedic research》1999,17(6):817-822
Strengthening of the hamstrings is often recommended following injury and reconstruction of the anterior cruciate ligament. It has been suggested that hamstrings activity stabilizes the knee and reduces anterior cruciate ligament load during weight-bearing flexion; however, the effects of hamstrings cocontraction on the kinematics and mechanics of the normal knee have not been assessed at physiological load levels. The aim of this study was to determine whether the addition of hamstrings force affects knee rotations, translations, and joint and quadriceps force during flexion with loads at physiological levels applied to the muscles and joints. Eight cadaveric knee specimens were tested with a servohydraulic mechanism capable of applying controlled dynamic loads to simulate quadriceps and hamstrings muscle forces throughout a physiological range of motion. A constant vertical load of physiologic magnitude was applied to the hip, and quadriceps force was varied to maintain equilibrium throughout flexion. Two conditions were tested: no hamstrings force and a constant hamstrings force equivalent to the vertical load. Hamstrings force significantly reduced internal rotation (p<0.0001) and anterior translation (p<0.0001), increased quadriceps force (p<0.0001) and normal resultant force on the tibia (p<0.0001), and reversed the direction of the shear force on the tibia (p<0.0001). These results suggest that hamstrings strengthening following anterior cruciate ligament injury may benefit anterior cruciate ligament-deficient and reconstructed knees by reducing the load in the ligament; however, they also imply that this comes at the expense of efficiency and higher patellofemoral and joint forces. 相似文献
8.
关节镜下半腱肌腱和股薄肌腱双隧道重建前十字韧带 总被引:22,自引:1,他引:21
目的探讨关节镜下联合应用半腱肌腱和股薄肌腱重建前十字韧带(anteriorcruciateligament,ACL)的方法及疗效。方法回顾自1998年4月~2000年5月在关节镜下联合应用半腱肌腱和股薄肌腱重建ACL的患者12例。于ACL前内侧束和后外侧束的附着部分别钻直径4.5mm的隧道,用半腱肌腱重建前内侧束,股薄肌腱重建后外侧束,保留半腱肌腱和股薄肌腱的附着点,在股骨隧道外口将半腱肌腱和股薄肌腱打结固定,不行内固定。所有患者术前及术后18个月行膝关节屈曲30°、60°、90°前抽屉试验,Lysholm评分方法评定膝关节功能。结果术后随访18~43个月,平均26个月。术前所有患者前抽屉试验均为阳性,术后9例阴性,2例屈膝30°位阳性,1例屈膝30°、60°位阳性。术前Lysholm评分为40~58分,平均50.5分,手术后18个月为62~92分,平均85分,总优良率为91.7%。结论应用半腱肌腱和股薄肌腱联合重建ACL,术后膝关节动态稳定性好,疗效满意。 相似文献
9.
Franceschi JP Sbihi A Champsaur P 《Revue de chirurgie orthopédique et réparatrice de l'appareil moteur》2002,88(7):691-697
We propose a method for repairing the anterior cruciate ligament which takes advantage of the multifascular nature of the ligament to achieve better physiological anteroposterior and rotational stability compared with conventional methods. Arthroscopic reconstruction of the anteromedial and posterolateral bundles of the ligament closely reproduces normal anatomy. We have used this technique in 92 patients with anterior cruciate ligament laxity and present here the mid-term results. The hamstring tendons (gracilis and semitendinosus) are harvested carefully to obtain good quality grafts. Arthroscopic preparation of the notch allows careful cleaning of the axial aspect of the lateral condyle; it is crucial to well visualize the region over the top and delimit the 9 h-12 h zone for the right knee or the 12-15 h zone for the left knee. The femoral end of the anteromedial tunnel lies close to the floor of the intercondylar notch, 5 to 10 mm in front of the posterior border of the lateral condyle, at 13 h for the left knee and 11 h for the right knee. The femoral end of the posterolateral tunnel lies more anteriorly, at 14 h for the left knee and 10 h for the right knee. The tibial end of the posterolateral tunnel faces the anterolateral spike of the tibia. The tibial end of the anteromedial tunnel lies in front of the apex of the two tibial spikes half way between the anteromedial spike and the anterolateral spike, 8 mm in front of the protrusion of the posteriolateral pin. The posterolateral graft is run through the femoral and tibial tunnels first. A cortical fixation is used for the femoral end. The femoral end of the anteromedial graft is then fixed in the same way. The tibial fixation begins with the posterolateral graft with the knee close to full extension. The anteromedial graft is fixed with the knee in 90 degrees flexion. Thirty patients were reviewed at least six months after the procedure. Mean age was 28.2 years. Mean overall IKDC score was 86% (36% A and 50% B). Gain in laxity was significant: 6.53 preoperatively and 2.1 postoperatively. Most of the patients (86.6%) were able to resume their former occupation 2 months after the procedure. The different components of the anterior cruciate ligament and their respective functions have been the object of several studies. The anteromedial bundle maintains joint stability during extension and anteroposterior stability during flexion. The posterolateral bundle contributes to the action of the anteromedial bundle with an additional effect due to its position: rotational stability during flexion. In light of the multifascicular nature of the anterior cruciate ligament and the residual rotational laxity observed after conventional repair, our proposed method provides a more anatomic reconstruction which achieves better correction of anteroposterior and rotational stability. This technique should be validated with comparative trials against currently employed methods. 相似文献
10.
Stephan Lorenz Hermann Anetzberger Jeffrey T. Spang Prof. Dr. Andreas B. Imhoff 《Operative Orthopadie und Traumatologie》2007,19(5-6):473-488
OBJECTIVE: To improve the rotational stability of the knee by anatomic reconstruction of the anterior cruciate ligament by socalled double-bundle technique using anteromedial and posterolateral grafts from native semitendinosus and gracilis. The grafts are fixed with bioabsorbable screws utilizing aperture fixation. INDICATIONS: Complete tear of the anterior cruciate ligament with positive Lachman sign and pivot shift. CONTRAINDICATIONS: Open growth plate. Osteoarthritis > grade 1 according to J?ger & Wirth. Age > or = 50 years with low sports activity (relative contraindication). SURGICAL TECHNIQUE: Graft harvest of the semitendinosus and gracilis tendons via a 3-cm horizontal skin incision parallel to pes anserinus and preparation of the tendons as double-looped grafts. Arthroscopy, resection of the stump of the anterior cruciate ligament, and clearance of its origin and insertion. Tunnel placement by means of aiming devices in the following order: tibial posterolateral, tibial anteromedial, femoral anteromedial (transtibial or via the anteromedial portal in 120 degrees flexion), and femoral posterolateral (via additional medial arthroscopic portal). The anteromedial (semitendinosus tendon) and posterolateral (gracilis tendon) bundles are passed through the tunnels and fixed on the femoral side. Tibial fixation of the graft by bioresorbable interference screw with knee flexion of 45 degrees (anteromedial) and 10 degrees (posterolateral). POSTOPERATIVE MANAGEMENT: Depending on the degree of swelling, rehabilitation with partial weight bearing for 14 days and full range of motion. Return to sports after 6 months, no contact sports until 9 months. RESULTS: From May 2004 to June 2005, anatomic double-bundle reconstruction was performed in 19 patients (13 male, six female, average age 31 years [18-48 years]) with isolated anterior cruciate ligament rupture without concomitant lesions. Clinical follow-up examination on average at 21.3 months (16-30 months) postoperatively. The Lysholm Score improved from an average of 65.2 to 94.5 points (75-100 points). The IKDC (International Knee Documentation Committee) Score yielded nine very good and ten good results in the relevant subgroups of motion, effusion and ligament stability. Measurement of anteroposterior translation with the KT-1000 instrument at 134 N showed increased translation of 1.8 mm (-2 to 5 mm) compared to the contralateral knee. 相似文献
11.
Distribution of in situ forces in the anterior cruciate ligament in response to rotatory loads. 总被引:27,自引:0,他引:27
Mary T Gabriel Eric K Wong Savio L-Y Woo Masayoshi Yagi Richard E Debski 《Journal of orthopaedic research》2004,22(1):85-89
The anterior cruciate ligament (ACL) can be anatomically divided into anteromedial (AM) and posterolateral (PL) bundles. Current ACL reconstruction techniques focus primarily on reproducing the AM bundle, but are insufficient in response to rotatory loads. The objective of this study was to determine the distribution of in situ force between the two bundles when the knee is subjected to anterior tibial and rotatory loads. Ten cadaveric knees (50+/-10 years) were tested using a robotic/universal force-moment sensor (UFS) testing system. Two external loading conditions were applied: a 134 N anterior tibial load at full knee extension and 15 degrees, 30 degrees, 60 degrees, and 90 degrees of flexion and a combined rotatory load of 10 Nm valgus and 5 Nm internal tibial torque at 15 degrees and 30 degrees of flexion. The resulting 6 degrees of freedom kinematics of the knee and the in situ forces in the ACL and its two bundles were determined. Under an anterior tibial load, the in situ force in the PL bundle was the highest at full extension (67+/-30 N) and decreased with increasing flexion. The in situ force in the AM bundle was lower than in the PL bundle at full extension, but increased with increasing flexion, reaching a maximum (90+/-17 N) at 60 degrees of flexion and then decreasing at 90 degrees. Under a combined rotatory load, the in situ force of the PL bundle was higher at 15 degrees (21+/-11 N) and lower at 30 degrees of flexion (14+/-6 N). The in situ force in the AM bundle was similar at 15 degrees and 30 degrees of knee flexion (30+/-15 vs. 35+/-16 N, respectively). Comparing these two external loading conditions demonstrated the importance of the PL bundle, especially when the knee is near full extension. These findings provide a better understanding of the function of the two bundles of the ACL and could serve as a basis for future considerations of surgical reconstruction in the replacement of the ACL. 相似文献
12.
Determination of a zero strain reference for the anteromedial band of the anterior cruciate ligament
B. C. Fleming B. D. Beynnon H. Tohyama R. J. Johnson C. E. Nichols P. Renstrm M. H. Pope 《Journal of orthopaedic research》1994,12(6):789-795
The objective of this study was to verify a method previously used to determine a reference length for calculations of anterior cruciate ligament strain. In nine knee specimens, an arthroscopic force probe and a Hall effect transducer were placed in the anteromedial band of the ligament. Anteroposterior-directed shear loads then were applied to the knee joint with the knee flexed to 30°. From the sigmoidal curve for shear load versus displacement of the anterior cruciate ligament midsubstance, the length of the transducer at the inflection point was determined graphically by two independent examiners. Previous studies suggested that the inflection point corresponds to the slack-taut transition of the anteromedial band. The force probe was used to determine the actual length of the transducer when the anteromedial band became load bearing. No significant differences were found between the reference lengths determined by the inflection point method and the force probe. The force probe demonstrated that the anterior cruciate ligament became load bearing when an anterior shear load of 8.8 N was applied to the tibia with the knee at 30° of flexion. Furthermore, multiple cycles of anteroposterior shear loading did not influence these values. The force probe verified that the inflection method provides a reasonable estimate of the absolute strain reference (within 0.7% strain). 相似文献
13.
A two-dimensional model of the tibio-femoral joint was constructed by using the results of cadaver knee dissections together with radiographic landmarks on healthy knees loaded at various angles of flexion. The tibio-femoral compressive force during isometric knee extension had the same magnitude as the patellar tendon force. The tibio-femoral shear force changed direction from posterior at full flexion to anterior when the knee was extended, indicating that high forces may arise in the anterior cruciate was extended, indicating that high forces may arise in the anterior cruciate ligament in the straight knee. Women developed some 20 per cent higher knee joint forces than men for the same extending muscular moment higher knee joint forces than men for the same extending muscular moment, since women's patellar tendon moment arms were found to be shorter. The model presented may be used for quantifying tibio-femoral forces during knee extending activities. 相似文献
14.
Lars Engebretsen William D. Lew Jack L. Lewis Robert E. Hunter P l Benum 《Acta orthopaedica》1990,61(3):225-230
A cadaver knee-testing system was used to analyze the effect of an extraarticular reconstruction for anterolateral rotatory instability in which the lateral one third of the patellar tendon with a patellar bone block was transposed to the lateral femoral condyle. Ligament and reconstruction tendon forces were measured using buckle transducers, and joint motion was measured using an instrumented spatial linkage as 90 N anteriorly directed tibial loads were applied to seven knee specimens at 0°, 30°, 60°, and 90° of flexion by a pneumatic load apparatus. This was done for each knee with first an intact, then an excised anterior cruciate ligament, and finally the extraarticular reconstruction.
Forces in the transposed graft exhibited an isotonic pattern over the flexion range, unlike the intact anterior cruciate ligament, which was more highly loaded in extension than in flexion. The transposition of the patellar tendon led to external rotation of the tibia In both unloaded and anterior load conditions throughout flexion. Collateral ligament forces increased with anterior cruciate ligament excision, with the force in the medial ligament remaining higher than normal with the reconstruction, while the lateral forces became lower than normal. 相似文献
Forces in the transposed graft exhibited an isotonic pattern over the flexion range, unlike the intact anterior cruciate ligament, which was more highly loaded in extension than in flexion. The transposition of the patellar tendon led to external rotation of the tibia In both unloaded and anterior load conditions throughout flexion. Collateral ligament forces increased with anterior cruciate ligament excision, with the force in the medial ligament remaining higher than normal with the reconstruction, while the lateral forces became lower than normal. 相似文献
15.
L Engebretsen W D Lew J L Lewis R E Hunter P Benum 《Acta orthopaedica Scandinavica》1990,61(3):225-230
A cadaver knee-testing system was used to analyze the effect of an extraarticular reconstruction for anterolateral rotatory instability in which the lateral one third of the patellar tendon with a patellar bone block was transposed to the lateral femoral condyle. Ligament and reconstruction tendon forces were measured using buckle transducers, and joint motion was measured using an instrumented spatial linkage as 90 N anteriorly directed tibial loads were applied to seven knee specimens at 0 degree, 30 degrees, 60 degrees, and 90 degrees of flexion by a pneumatic load apparatus. This was done for each knee with first an intact, then an excised anterior cruciate ligament, and finally the extraarticular reconstruction. Forces in the transposed graft exhibited an isotonic pattern over the flexion range, unlike the intact anterior cruciate ligament, which was more highly loaded in extension than in flexion. The transposition of the patellar tendon led to external rotation of the tibia in both unloaded and anterior load conditions throughout flexion. Collateral ligament forces increased with anterior cruciate ligament excision, with the force in the medial ligament remaining higher than normal with the reconstruction, while the lateral forces became lower than normal. 相似文献
16.
《Acta orthopaedica》2013,84(5):426-429
We studied the importance of the two parts of the anterior cruciate ligament (ACL), the medial collateral ligament (MCL), and the posterior medial capsule (PMC) to translatory and spontaneous axial rotatory instability in 15 osteoligamentous knee preparations. Instability was recorded continuously from zero to 90 degrees of flexion with application of a constant force to the tibia. Isolated cutting of the ACL caused a moderate anterior translatory movement, which increased if the MCL was also cut. Transection also of the PMC resulted in an even larger range of anterior translatory movement. Combined lesions to the MCL and the PMC and the posterolateral part of the ACL did not cause such instability provided the anteromedial part of the ACL was intact.Application of a valgus moment to specimens with injured ACL and medial structures induced a spontaneous anteromedial subluxation of the tibia in a semiflexed position. When flexion was increased to 70–80 degrees, a sudden reduction was observed 相似文献
17.
Biomechanics of the knee-extension exercise. Effect of cutting the anterior cruciate ligament 总被引:6,自引:0,他引:6
E S Grood W J Suntay F R Noyes D L Butler 《The Journal of bone and joint surgery. American volume》1984,66(5):725-734
We conducted this study to determine the effective moment arm of the knee extensor mechanism and the conditions under which the anterior cruciate ligament is loaded during knee-extension exercises. The moment arm was calculated from measurement of the quadriceps force required to extend the knee with and without resistive weights placed at the foot, the leg weight, and the location of its center of gravity. Changes in three-dimensional joint motion after the anterior cruciate ligament was removed were considered to be an indication that the ligament was loaded. The quadriceps force rose during the initial phase of knee extension and remained nearly constant at an average value of 177 newtons between 50 and 15 degrees. With extension past 15 degrees it rose rapidly, reaching an average of 350 newtons at zero degrees of extension, and continued to increase with hyperextension. The addition of thirty-one newtons (seven pounds) at the foot approximately doubled the quadriceps force that was required to extend the knee. The effective moment arm of the extensor mechanism increased with knee extension, peaked at approximately 20 degrees, and rapidly decreased with further extension. No change was found in the quadriceps force or its effective moment arm when the anterior cruciate ligament was sectioned except in hyperextension, where the quadriceps force decreased in two of five specimens. There was, however, an increased anterior tibial displacement in the range of 30 degrees to full extension, suggesting that the anterior cruciate ligament is loaded in that flexion arc. Clinical Relevance: This study demonstrates that very large quadriceps forces are required to accomplish the last 15 degrees of extension during leg-raising exercises, typically twice those required to reach 30 degrees of flexion. The large forces that are required to obtain full extension explain why an extensor lag occurs with quadriceps weakness even though a full passive range of motion is possible. Since thirty-one newtons (seven pounds) of resistive weight added at the foot approximately doubles the quadriceps forces required to extend the leg alone, using such weights can produce very large quadriceps forces and concurrent patellofemoral and tibiofemoral contact forces. Because the quadriceps force increases little as the leg is extended from 50 to 15 degrees, in patients with patellofemoral chondroses for whom a full range of joint motion is not desired, quadriceps exercises can be limited to the amount of extension without decreasing quadriceps force.(ABSTRACT TRUNCATED AT 400 WORDS) 相似文献
18.
Knee mechanics after repair of the anterior cruciate ligament A cadaver study of ligament augmentation 总被引:1,自引:0,他引:1
Lars Engebretsen William D. Lew Jack L. Lewis Robert E. Hunter 《Acta orthopaedica》1989,60(6):703-709
An experimental knee-testing system was used to investigate the immediate postoperative mechanical state in knees with nonaugmented and augmented repairs of the anterior cruciate ligament. Ligament, repair tissue, and augmentation forces were measured using buckle transducers, and joint motion was measured using an instrumented spatial linkage during the application of 90 N anteriorly-directed tibial loads to seven fresh knee specimens at 0-90 degrees of flexion. Force and motion data were collected from each knee with an intact and excised anterior cruciate ligament, and after performing (1) a nonaugmented repair and an augmented repair using the Ligament Augmentation Device (3M Company) placed either (2) anatomically through the lateral femoral condyle or (3) in the over-the-top position.
The forces in the nonaugmented repair and the repair with the augmentation in the two positions were greater than the forces in the intact anterior cruciate ligament with the knee under the same anterior loads; this difference from normal was not significant with the over-the-top augmentation. With the augmentation anatomically placed, the load sharing did not reduce the force in the repair tissue as compared with the nonaugmented case. The over-the-top augmentation, on the other hand, lowered the repair tissue forces at extension while avoiding high repair tissue forces in flexion. The tibia was consistently in an externally rotated configuration compared with normal in both the unloaded and anterior load states with all three repair procedures. 相似文献
The forces in the nonaugmented repair and the repair with the augmentation in the two positions were greater than the forces in the intact anterior cruciate ligament with the knee under the same anterior loads; this difference from normal was not significant with the over-the-top augmentation. With the augmentation anatomically placed, the load sharing did not reduce the force in the repair tissue as compared with the nonaugmented case. The over-the-top augmentation, on the other hand, lowered the repair tissue forces at extension while avoiding high repair tissue forces in flexion. The tibia was consistently in an externally rotated configuration compared with normal in both the unloaded and anterior load states with all three repair procedures. 相似文献
19.
Anatomy and function of the anterior cruciate ligament 总被引:11,自引:0,他引:11
The anterior cruciate ligament originates at the medial wall of the lateral femoral condyle and inserts into the middle of the intercondylar area. It contributes significantly to the stabilization and kinematics of the knee joint. The femoral origin is oval and is located in the posterior aspect of the lateral femoral condyle. Therefore, it is difficult to visualize the femoral origin arthroscopically. This might be one reason for anterior malpositioning of the femoral bone tunnel during anterior cruciate ligament reconstruction. The position of the femoral origin is behind the center of rotation of the knee joint; therefore, it becomes tense when the knee is extended. The tibial insertion is oval and its center is nearly in the middle of the tibial plateau. Definite landmarks for tibial tunnel placement in anterior cruciate ligament reconstruction are the distance between the central insertion point at the intercondylar floor and the posterior cruciate ligament (7-8 mm) and the anterior horn of the lateral meniscus. The anterior cruciate ligament consists of multiple small fiber bundles. From a functional point of view, one can differentiate the anteromedial and posterolateral fiber bundles. The anteromedial fibers are tense during a greater range of motion than the posterolateral fibers. The main part of the anterior cruciate ligament consists of type I collagen-positive dense connective tissue. The longitudinal fibrils of type I collagen are divided into small bundles by thin type III collagen-positive fibrils. In the distal third, the structure of the tissue varies from the typical structure of a ligament. In this region, the structure of the tissue resembles fibrocartilage. Oval-shaped cells surrounded by a metachromatic extracellular matrix lie between the longitudinal collagen fibrils. The femoral origin and the tibial insertion have the structure of a chondral apophyseal enthesis. Near the anchoring region at the femur and tibia, there should be various mechanoreceptors, which might have an important function for the kinematics of the knee joint. The blood supply of the anterior cruciate ligament arises from the middle geniculate artery. The ligament is covered by a synovial fold where the terminal branches of the middle and the inferior geniculate artery form a periligamentous network. From the synovial sheath, the blood vessels penetrate the ligament in a horizontal direction and anastomose with a longitudinally orientated intraligamentous network. The distribution of blood vessels within the anterior cruciate ligament is not homogeneous. We detected three avascular areas within the ligament: Both fibrocartilaginous entheses of the anterior cruciate ligament are devoid of blood vessels. A third avascular zone is located in the distal zone of fibrocartilage adjacent to the roof of the intercondylar fossa. 相似文献
20.
Knee mechanics after repair of the anterior cruciate ligament. A cadaver study of ligament augmentation 总被引:2,自引:0,他引:2
An experimental knee-testing system was used to investigate the immediate postoperative mechanical state in knees with nonaugmented and augmented repairs of the anterior cruciate ligament. Ligament, repair tissue, and augmentation forces were measured using buckle transducers, and joint motion was measured using an instrumented spatial linkage during the application of 90 N anteriorly-directed tibial loads to seven fresh knee specimens at 0-90 degrees of flexion. Force and motion data were collected from each knee with an intact and excised anterior cruciate ligament, and after performing (1) a nonaugmented repair and an augmented repair using the Ligament Augmentation Device (3M Company) placed either (2) anatomically through the lateral femoral condyle or (3) in the over-the-top position. The forces in the nonaugmented repair and the repair with the augmentation in the two positions were greater than the forces in the intact anterior cruciate ligament with the knee under the same anterior loads; this difference from normal was not significant with the over-the-top augmentation. With the augmentation anatomically placed, the load sharing did not reduce the force in the repair tissue as compared with the nonaugmented case. The over-the-top augmentation, on the other hand, lowered the repair tissue forces at extension while avoiding high repair tissue forces in flexion. The tibia was consistently in an externally rotated configuration compared with normal in both the unloaded and anterior load states with all three repair procedures. 相似文献