Chain Growth Polycondensation as a Polymer Generating Reaction in the Synthesis of Oligo(p‐phenyleneethynylene)s with Low Polydispersity

Summary: The polycondensation of 1‐ethynyl‐2,5‐dihexyl‐4‐iodobenzene in the presence of 1‐ethynyl‐2,5‐dihexyl‐4‐(2‐phenylethynyl)benzene proceeds according to the mechanism of initiated chain growth polycondensation. It has allowed the synthesis of oligomers with a desired molecular weight and a narrow molecular weight distribution. The reasons for the side reaction leading to the formation of diyne compounds are revealed and the presumed mechanism is given. This opens prospects for the preparation of defectless poly(p‐phenyleneethynylene)s with required molecular weights and narrow molecular weight distributions.

     

Metathetic Selective Degradation of Polyisoprene: Low‐Molecular‐Weight Telechelic Oligomer Obtained from Both Synthetic and Natural Rubber

Summary: Degradation studies of cis‐1,4‐polyisoprene were carried out using first and second generation Grubbs catalysts to achieve end‐functionalized acetoxy oligomers in both an organic solvent and a latex phase at room temperature. Well‐defined acetoxy telechelic polyisoprene structures were obtained in a selective manner with a range of from 10 000 to 30 000, with a polydispersity index of around 2.5.

Structure produced by the metathetic depolymerization of hydroxy telechelic cis‐1,4‐polyisoprene.     

Control of the radical polymerization by 2,2,15,15‐tetramethyl‐1‐aza‐4,7,10,13‐tetraoxacyclopentadecan‐1‐oxyl and its sodium salt

The control of the radical polymerization of styrene by 2,2,15,15‐tetramethyl‐1‐aza‐4,7,10,13‐tetraoxacyclopentadecan‐1‐oxyl is reported here in bulk at 90 °C, 120 °C and in miniemulsion. Similarly, the control by its sodium complex is reported in bulk at 90 °C.

M _n vs. conversion for 3 , 3Na , and TEMPO.     

Synthesis and Characterization of Conducting Copolymers of (S)‐2‐Methylbutyl‐2‐(3‐thienyl)acetate with Pyrrole and Thiophene

Polymerization of methylbutyl‐2‐(3‐thienyl)acetate (MBTA) was achieved by constant current electrolysis at low temperature. Subsequently, the syntheses of block copolymers of polyMBTA were accomplished in the presence of either pyrrole or thiophene by constant potential electrolysis. Moreover, the copolymer of MBTA with thiophene was obtained with constant potential electrolysis.

The synthesis of monomer MBTA.     

Effect of Molecular Structure and Thermal Treatment on Photo‐optical Properties of Photochromic Azobenzene‐containing Polymer Films

Three novel photochromic azobenzene‐containing comb‐shaped polyacrylates are synthesized and their phase behavior and photo‐optical properties are studied. The influence of the side photochromic group structure, thermal treatment, and light irradiation on aggregation of azobenzene chromophores in thin spin‐coated films of the polymers is investigated in detail. Special attention is paid to studying the photo‐orientation processes in polymers films induced by polarized blue light (473 nm). The relationship between the photochromic group architecture, phase behavior, thermal treatment of films, and kinetics of chromophore photo‐orientation is established and discussed. It is found that the position of the N?N bond in chromophores plays an important role in the kinetics of the process, but does not affect the maximum value of dichroism.

     

“One‐pot” Synthesis of 1‐Vinyl‐2‐pyrrolidone with Protic Functional Groups in 3‐Position

A synthetic route that allows modification of 1‐vinyl‐2‐pyrrolidone with an alcohol or thiol group in its 3‐position in a one‐pot reaction without using protecting groups is described. The strategy used to achieve this goal is the reaction of the carboxamide anion of 1‐vinyl‐2‐pyrrolidone with cyclic precursors of these functionalities. It is furthermore shown that VP‐monomers functionalized with OH groups are suitable for the preparation of the corresponding copolymers with pure VP. As a second application of the new compounds, we also describe the synthesis of the first asymmetric crosslinker based on VP.

     

Polyurea With L‐Lysinyl Residues as Components: Application to Membrane Separation of Enantiomers

Novel polyureas are synthesized from lysinyl residues. The polyurea thus prepared yields a durable self‐standing membrane that can be converted into a molecular recognition material by using Z‐D ‐Glu or Z‐L ‐Glu as a print molecule. The Z‐D ‐Glu molecularly imprinted membrane adsorbes the D ‐isomer of Glu in preference to the corresponding L ‐Glu and vice versa. Even though the polyurea consists of L ‐lysinyl residues, both Z‐D ‐Glu and Z‐L ‐Glu work as print molecules to construct molecular (chiral) recognition sites in the membrane. Those molecularly imprinted membranes show chiral separation abilities when a concentration gradient or an applied potential difference is applied as a driving force for membrane transport.

     

Nanoscale Analysis of Polymer Interfaces by Energy‐Filtering Transmission Electron Microscopy

Summary: Energy‐filtering transmission electron microscopy (EFTEM) was employed for the analysis of polymer‐polymer interfaces. To attain imaging and spectral analyses with a spatial resolution of 10 nm, problems arising in the EFTEM analysis for polymer specimens were investigated. Interfaces in poly(methyl methacrylate)/polystyrene‐co‐polyacrylonitrile random copolymer (PMMA/SAN) bilayer films annealed at different temperatures were analyzed by means of elemental mapping and Image‐EELS on EFTEM and the effect of the annealing temperature on the interfacial structures was also investigated.

     

Hydrolytic Polycondensation of Bisphenol‐A‐Bischloroformate Catalyzed by Phase‐Transfer Catalysts

The hydrolytic interfacial polycondensation of bisphenol‐A‐bischloroformate was performed with four different phase‐transfer (PT) catalysts: N‐butylpyridinium bromide, triethylbenzylammonium (TEBA) chloride, tetrabutylammonium hydrogen sulfate, and tetraphenylphosphonium bromide. These polycondensations were conducted at 5 or 35 °C initial reaction temperature. The resulting polycarbonates were characterized by viscosity and SEC measurements and by MALDI‐TOF mass spectrometry. The four PT catalysts gave quite different results with respect to molecular weight and formation of cyclic polycarbonates. The highest molecular weights (number average, and weight average, ) were obtained with TEBA‐Cl. Lower temperatures and high feed ratios of TEBA‐Cl proved to be favorable for both high molecular weights and high fractions of cycles. Cyclic polycarbonates were detectable in the mass spectra up to 14 kDa (technical limit of the measurements). Low molecular weights in combination with unreacted chloroformate groups proved that the other PT‐catalysts were less efficient under the given reaction conditions.

MALDI‐TOF mass spectrum of the polycarbonate No. 3b .     

Novel Phosphorous‐Containing Aromatic Polyethers – Synthesis and Characterization

Summary: The synthesis of novel phosphorous‐containing aromatic polyethers P‐PEEK and P‐PSU, based on poly(ether ether ketone)s (PEEK) and poly(ether sulfone)s (PSU) was carried out successfully by using phosphorous‐containing aromatic diols instead of bisphenol A in the usual synthesis procedure. The molecular weights of the P‐PEEKs and P‐PSUs obtained reflect both the influence of the different halogen components used and the lower thermal stabilities of the phosphorous‐containing diols compared to bisphenol A. However, polymers with sufficient molecular weights could be obtained, having interestingly high T_gs, high thermal stabilities as well as modified flame retardance properties depending on the diol type incorporated.

Comparison of the molecular weights of the synthesized P‐polyethers.     

Fluorene‐Based Single‐Chain Copolymers for Color‐Stable White Light‐Emitting Diodes

Fluorene‐based single‐chain copolymers with a white light emitter consisting of a blue and an orange chromophore have been synthesized and their photophysical and electroluminescent properties are investigated. The experimental results suggest that only a relatively small fraction of the orange‐emitting units incorporated into the fluorene is needed to achieve efficient white light emission by controlled incomplete energy transfer. A device from a copolymer with 0.02% DDQ content showed the highest external quantum efficiency of 2.64% with a luminance efficiency of 4.06 cd · A^?1 with CIE coordinates (0.28, 0.24). The EL emissions are extremely stable over a wide range of current densities.

     

Photo‐Crosslinked Side‐Chain Liquid‐Crystalline Elastomers for Microsystems

Photo‐crosslinkable side‐chain liquid‐crystalline polymers (LCPs) containing photoreactive benzophenone cores are synthesized in order to obtain their corresponding side‐chain liquid‐crystalline elastomers (LCEs). This strategic synthesis allows thin elastomeric films and their integration into microsystems for actuators and micromachines to be obtained. As an example of this principle, a gripper was developed. The position of its arms can be changed by applying voltages from 1.5 to 3.5 V at different rates. Small changes in the liquid‐crystalline elastomer film cause strains of up to 150% in the microdevice and the capacity to move up to 400 times its own mass due to the nematic‐to‐isotropic transformation.

     

Spectroelectrochemical and Photovoltaic Characterization of a Solution‐Processable n‐and‐p Type Dopable Pyrrole‐Bearing Conjugated Polymer

D‐A‐D‐type polymers are of high interest in the field of photovoltaics and electrochromism. In this study we report the synthesis and electrochemical properties of PPyBT along with its photophysical properties and photovoltaic performance. PPyBT is soluble in common organic solvents and both n‐ and p‐type dopable, which is a desired property for conjugated polymers. During electrochemistry studies, the onset potentials of the polymer were determined as +0.2 V for oxidation and ?1.4 V for reduction. Using these values, HOMO and LUMO energy levels were calculated. The photovoltaic properties of PPyBT were also studied. PL studies showed that there is a charge transfer between PPyBT (donor) and PCBM (acceptor).

     

X‐Ray Diffraction Studies on the Phase‐Transformational Behavior of a Smectic Liquid‐Crystalline Elastomer Composed of Chiral Mesogens

Structural changes through successive phase transformations of a chiral smectic liquid‐crystalline elastomer are investigated by X‐ray scattering technique. In uniaxially deformed elastomers, the smectic layer seemingly tilts even in the SmA phase, in which an in‐plane chevron structure formed in the tilted smectic phase. On the basis of an analysis of the layer reflection peaks, the layer correlation length in the tilted smectic phases is shorter than that in the non‐tilted SmA phase, though smectic layers in the tilted smectic phases are better ordered than those in SmA.

Experimental arrangement for X‐ray measurements of the uniaxially deformed elastomer in the tilted smectic phase at room temperature.     

Narrowly Distributed Surfactant‐Free Polystyrene Latex with a Water‐Soluble Comonomer

Summary: The surfactant‐free synthesis of latex polymers of styrene and sodium styrenesulfonate (NaSS) was investigated. The development of size and size distribution of the particles was studied by photo‐correlation spectroscopy (PCS) and transmission electronic microscopy (TEM). The effects of NaSS concentration and the order of addition of reactants were examined in detail. The results showed that the particle size decreases with an increase in the styrene sulfonate concentration. The polydispersity index can be reduced by mixing NaSS with styrene homogeneously before adding initiator, but this leads to a slightly larger mean particle size.

TEM image of surfactant‐free polystyrene latex made by the modified method.     

Preparation and Characterization of Acetoacetoxyethyl Methacrylate‐Based Gels

Novel polymeric gels have been prepared by radical copolymerization of acetoacetoxyethyl methacrylate (AAEM) and hydroxyethyl methacrylate (HEMA) in water‐ethanol medium. The influence of the HEMA:AAEM ratio and crosslinker concentration on properties of gels was studied. Independently on gel composition the maximum swelling was detected in chloroform. It was found that PAAEM gels possess phase transition temperature or upper critical solution temperature (UCST) in alcohol‐water solutions. UCST decreases in linear order from 75 to 10 °C when HEMA content in gel structure increases. The minimal UCST of AAEM/HEMA gels in binary alcohol‐water mixtures is shifted toward lower temperatures and lower alcohol concentrations when the alkyl chain of alcohol increases.

AAEM/HEMA gels prepared at different BIS concentrations (1:1 mol‐%, 2:2.5 mol‐%, 3:5 mol‐%).     

Polyterthiophenes Incorporating 3,4‐Difluorothiophene Units: Application in Organic Field‐Effect Transistors

Two terthiophenes bearing core fluorinated thienyl units have been synthesised as potential semiconductor materials for organic field‐effect transistors. Polymerisation of these compounds has been achieved using conventional iron(III) chloride oxidative coupling methods and by electrochemical oxidation. Characterisation of the fluorinated materials has been achieved by absorption spectroscopy and cyclic voltammetry. A soluble hexyl‐functionalised polymer (poly 8b ) was used in an OFET device; hole mobilities were measured up to 3 × 10^?3 cm² · V^?1 · s^?1, and the device had an on/off ratio of 10⁵ and a turn‐on voltage of +4 V.

     

Novel Aromatic Polymer Electrolyte with Comb‐like Structure: Synthesis and Properties

Summary: A novel aromatic polymer electrolyte with pendant sulfodecyloxy groups was synthesized. The monomer 4 , bis[2‐(10′‐sulfodecyloxy)‐5‐chlorophenyl]sulfone, was synthesized from bis(2‐hydroxy‐5‐chlorophenyl)sulfide via bromoalkylation, oxidation, and sulfonation, and then polymerized via Ni‐catalyzed C C coupling polymerization to afford the title polymer electrolyte 6 . The polymer 6 was isolated as a brown powder with molecular weight of = 12 000. The high decomposition temperature of 6 (200 °C) was confirmed by TG/DTA‐MS measurement. Proton conductivity of 6 was measured using porous polyimide membrane as a supporting substrate. The pore‐filled membrane showed 1 × 10⁻⁵ S · cm⁻¹ of the proton conductivity at 80 °C and 90% RH.

Synthesis of aromatic polymer electrolyte having sulfodecyloxy groups via nickel‐catalyzed C C coupling polymerization.     

In situ Self‐Assembly of Zigzag Polyimide Chains to Crystalline Branched Supramolecular Structures with High Surface Area

Crystalline‐branched supramolecular structures (CBSSs) with surface area (Brunauer‐Emmett‐Teller model) up to 350 m² · g^?1 were synthesized by in situ self‐assembly of the zigzag polyimide macromolecules under solvent‐thermal condition. The pore formation mechanism in these polyimides was supposed to be different from any microporous polymers ever reported. Although this family of porous polyimide does not belong to covalent organic frameworks (COFs), their high degree of crystallinity shows the possibilities that the dynamic covalent chemistry for synthesizing COFs could be extended from easily hydrolyzable B? O bond to a more stable imido bond. Therefore, we believe that these CBSSs could be useful in many applications, e.g., catalyst carriers and low‐K materials.

     

High‐Gain Long‐Lived Amplified Spontaneous Emission from Dye‐Doped Fluorinated Polyimide Planar Waveguides

Long‐lived amplified spontaneous emission (ASE) action is demonstrated in waveguides based in transparent newly synthesized fluorinated polyimides (FPI) doped with laser dye Pyrromethene 597. Relevant parameters to optimize the lasing performance of the guides are the polymer chain density and fluorine content. The guide with the higher fluorine content was the most stable, with the ASE emission remaining at 50% of its initial value after 40 000 pump pulses of ≈220 kW · cm^?2 delivered at a repetition rate of 5 Hz. Net gains of up to 93 cm^?1 were obtained at a pump intensity of about 500 kW · cm^?2 (34 µJ pulse^?1).