Discrepant findings of computed tomography quantification of minimal lumen area of coronary artery stenosis: Correlation with intravascular ultrasound

Objectives

To study the diagnostic performance of computed tomography (CT) quantification of minimal lumen area (MLA) based on multiple factors (image quality, calcification and lesion locations), with reference to intravascular ultrasound (IVUS).

Methods

Consecutive clinically ordered patients were prospectively enrolled in our study. CT quantification of MLA was manually measured on cross-sectional view and further compared with IVUS findings. A significant lesion was defined as ≤6 mm² MLA for the left main (LM) coronary artery and a ≤4 mm² MLA for other epicardial vessels.

Results

Non-calcified lesions had good correlation between CT and IVUS (r = 0.96) and the sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) were 85% (51/60), 93.94% (31/33), 96.23% (51/53) and 77.5% (31/40) respectively. Decreased correlation (r = 0.814) lower specificity (23.81% (5/21)) and positive predictive value (60.98% (25/41)) were observed in calcified subgroup. Artifact-absent lesions demonstrated excellent correlation (r = 0.967) and the sensitivity, specificity, PPV and NPV were 96% (48/50), 93.94% (31/33), 96% (48/50) and 93.94% (31/33) respectively. Impaired correlation (r = 0.584) was noted in artifact-present lesions and the sensitivity, specificity, PPV and NPV were 80% (28/35), 23.81% (5/21), 63.64% (28/44) and 41.67% (5/12) respectively. Excellent correlation between CT and IVUS was noted in proximal epicardial vessels (r = 0.908) and the sensitivity, specificity, PPV and NPV were 92.31% (36/39), 78.13% (25/32), 83.72% (36/43) and 89.29% (25/28) respectively. Middle right coronary artery lesions showed non-significant correlation (r = 0.54, p = 0.055).

Conclusions

CT quantification of MLA can only be accurately achieved in non-calcified lesions with absence of artifact. Diagnostic performance is impaired in calcified lesions.     

Comparison of multislice computed tomography with intravascular ultrasound for detection and characterization of coronary artery plaques: a systematic review

Purpose

Multislice computed tomography (MSCT) is a novel non-invasive test for detection and analysis of coronary artery plaques. A systematic review was conducted of the literature to compare MSCT with IVUS as the reference standard for assessing coronary artery plaques.

Materials and methods

We performed a literature search in the online database MEDLINE, which was accessed at http://www.pubmed.gov on 9th April 2008.

Results

The search identified 14 studies with 340 patients (mean age 59 ± 5 years). The systematic review revealed a sensitivity of MSCT on the lesion level (n = 1779 coronary plaques) on the order of 90% (range from 87 to 92%) in comparison to IVUS. Per-segment analysis (n = 356) yielded a lower sensitivity of 81-86%. In the per-vessel analysis (n = 90), MSCT had a better sensitivity and specificity for the RCA (83-89% and 92-100%) and the LAD (83-87% and 93%) than for the LCX (71-85% and 77-89%), and on the vessel level and the cross-section analysis MSCT was more sensitive for calcified plaques than for non-calcified plaque. It is noteworthy that most studies provide only incomplete data on technical and methodological parameters such as radiation exposure and patient characteristics.

Conclusion

MSCT is an accurate and reliable test for detection of coronary artery plaques in comparison to IVUS with limitations in regards to the LCX and non-calcified plaques. Studies published thus far are limited by the sample sizes and methodological quality issues.     

Quantification of coronary stenosis by dual source computed tomography in patients: a comparative study with intravascular ultrasound and invasive angiography

Objective

To determine the accuracy of dual-source CT (DSCT) to quantify coronary stenosis compared to intravascular ultrasound (IVUS) and quantitative coronary angiography (QCA).

Methods

21 patients (23 vessels) were examined with DSCT, IVUS and invasive coronary angiography. Coronary minimal luminal diameter (MLD) and area (MLA) were measured in cross-sectional multi-planar reformatted images perpendicular to the vessel long-axis. The vessel cross-sectional area stenosis (MLA/CSA ratio) was calculated. DSCT results were compared with IVUS and QCA.

Results

A good correlation between DSCT and IVUS was noted for diameter and area stenosis (r = 0.69 and r = 0.73), with an overestimation of MLD stenosis by DSCT (+9.1%) and an underestimation of MLA stenosis (−5.8%). For MLD and MLA, high correlation coefficients (r = 0.78 and r = 0.90, respectively) were found between DSCT and IVUS; and the bias was almost zero (−0.41 mm and +0.1 mm², respectively).The correlation between DSCT and QCA was moderate (r = 0.60) for MLD stenosis with minor overestimation by DSCT (+4.0%) and moderate (r = 0.59) for MLD (bias, +0.01 mm).The cross-sectional area stenosis showed a moderate correlation (r = 0.59) between DSCT and IVUS (+0.00).

Conclusions

DSCT allows accurate quantification of coronary stenosis as compared to IVUS. An excellent correlation was found for the MLA between DSCT and IVUS.     

Endothelial shear stress computed from coronary computed tomography angiography: A direct comparison to intravascular ultrasound

IntroductionIntravascular ultrasound (IVUS) studies have shown that biomechanical variables, particularly endothelial shear stress (ESS), add synergistic prognostic insight when combined with anatomic high-risk plaque features. Non-invasive risk assessment of coronary plaques with coronary computed tomography angiography (CCTA) would be helpful to enable broad population risk-screening.AimTo compare the accuracy of ESS computation of local ESS metrics by CCTA vs IVUS imaging.MethodsWe analyzed 59 patients from a registry of patients who underwent both IVUS and CCTA for suspected CAD. CCTA images were acquired using either a 64- or 256-slice scanner. Lumen, vessel, and plaque areas were segmented from both IVUS and CCTA (59 arteries, 686 3-mm segments). Images were co-registered and used to generate a 3-D arterial reconstruction, and local ESS distribution was assessed by computational fluid dynamics (CFD) and reported in consecutive 3-mm segments.ResultsAnatomical plaque characteristics (vessel, lumen, plaque area and minimal luminal area [MLA] per artery) were correlated when measured with IVUS and CCTA: 12.7 ​± ​4.3 vs 10.7 ​± ​4.5 ​mm², r ​= ​0.63; 6.8 ​± ​2.7 vs 5.6 ​± ​2.7 ​mm², r ​= ​0.43; 5.9 ​± ​2.9 vs 5.1 ​± ​3.2 ​mm², r ​= ​0.52; 4.5 ​± ​1.3 vs 4.1 ​± ​1.5 ​mm², r ​= ​0.67 respectively. ESS metrics of local minimal, maximal, and average ESS were also moderately correlated when measured with IVUS and CCTA (2.0 ​± ​1.4 vs 2.5 ​± ​2.6 ​Pa^, r ​= ​0.28; 3.3 ​± ​1.6 vs 4.2 ​± ​3.6 ​Pa, r ​= ​0.42; 2.6 ​± ​1.5 vs 3.3 ​± ​3.0 ​Pa, r ​= ​0.35, respectively). CCTA-based computation accurately identified the spatial localization of local ESS heterogeneity compared to IVUS, with Bland-Altman analyses indicating that the absolute ESS differences between the two CCTA methods were pathobiologically minor.ConclusionLocal ESS evaluation by CCTA is possible and similar to IVUS; and is useful for identifying local flow patterns that are relevant to plaque development, progression, and destabilization.     

128层CT冠状动脉成像对左心室功能的评价

目的:应用冠状动脉成像原始数据,了解左心室形态变化,评价整体左心室功能。方法:收集90例患者冠状动脉成像原始数据,行MPR,观察左心室形态和各心肌节段的变化,并应用心功能分析软件自动计算出左心室收缩末期容积(ESV)、舒张末期容积(EDV)和射血分数(EF)。根据冠状动脉、左心室形态及整体左心室功能,将所有患者分为对照组、冠心病组、左心室肥厚组及心功能衰竭组,结合各组左心室形态变化,将左心室ESV、EDV和EF进行统计学比较和分析。结果:对照组患者冠状动脉和左心室形态正常;冠心病组左心室壁局限性增厚7例和变薄13例;左心室肥厚组左心室缩小、心室壁增厚;心功能衰竭组心室扩大、室壁普遍变薄。对照组、冠心病组、左心室肥厚组、心功能衰竭组平均EDV和ESV分别为(133.58±14.91)mL、(51.33±11.06)mL;(130.68±11.53)mL、(56.16±8.24)mL;(97.59±8.18)mL、(29.53±4.78)mL;(229.40±50.64)mL、(171.27±60.64)mL。冠心病组与对照组平均EDV和ESV比较,差异无统计学意义,左心室肥厚组及心功能衰竭组与对照组比较,差异均有统计学意义(P0.001)。对照组、冠心病组、左心室肥厚组、心功能衰竭组EF分别为(61.25±5.83)%、(56.37±6.79)%、(68.94±5.36)%和(26.33±8.30)%,差异均有统计学意义。结论:应用冠状动脉成像原始数据,结合冠状动脉及左心室形态改变,无创评价左心室整体功能,实用而可行,可为临床提供更多有价值的信息。     

Imaging coronary and extracoronary atherosclerosis: feasibility and impact of whole-body computed tomography angiography

A comprehensive whole-body approach to noninvasive evaluation of coronary and extracoronary vasculature is currently not available. The objective of our study was to assess the potential of 64-slice computed tomography angiography (64-CTA) for whole-body evaluation of atherosclerosis burden. Seventy-eight patients referred for coronary imaging underwent whole-body 64-CTA using an adjusted strategy for the administration of contrast medium with dose-saving algorithms involving ECG modulation and reduced tube voltage. Arterial segments (15 coronary, 32 systemic) were evaluated for significant (≥50%) steno-occlusive disease while arterovenous density was evaluated at seven extracoronary locations. Homogeneous attenuation (mean 321 ± 20 HU) was obtained throughout the systemic vasculature. Atherosclerosis was observed in 238/995 (24%) coronary and 368/2441 (15%) systemic segments. Significant stenoses/occlusions were present in 214 (21%)/24 (2.5%) coronary segments while asymptomatic clinically relevant stenoses were present in 49 systemic segments. Sensitivity, specificity, positive and negative predictive values of coronary 64-CTA among 52 patients who also underwent quantitative coronary angiography were 92%, 95%, 81% and 98%, respectively. ECG modulation decreased radiation exposure to 14.1–15.4 mSv per patient. Comprehensive, noninvasive assessment of atherosclerosis can be performed by whole-body 64-CTA and may have a positive impact on secondary prevention.     

Effect of a calcium deblooming algorithm on accuracy of coronary computed tomography angiography

BackgroundCoronary artery calcification is a significant contributor to reduced accuracy of coronary computed tomographic angiography (CTA) in the assessment of coronary artery disease severity. The aim of the current study is to assess the impact of a prototype calcium deblooming algorithm on the diagnostic accuracy of CTA.Methods40 patients referred for invasive catheter angiography underwent CTA and invasive catheter angiography. The CTA were reconstructed using a standard soft tissue kernel (CTA_STAND) and a deblooming algorithm (CTA_DEBLOOM). CTA studies were read with and without the deblooming algorithm blinded to the invasive coronary angiogram findings. Sensitivity, specificity, accuracy, positive predictive value and negative predictive value for the detection of stenosis ≥50% or ≥70% were evaluated using quantitative coronary angiography as the reference standard. Image quality was assessed using a 5-point scale, and the presence of image artifact recorded.ResultsAll studies were diagnostic with 548 segments available for evaluation. Image score was 3.64 ± 0.72 with CTA_DEBLOOM, versus 3.56 ± 0.72 with CTA_STAND (p = 0.38). CTA_DEBLOOM had significantly less calcium blooming artifact than CTA_STAND (12.5% vs. 47.5%, p = 0.001). Based on a 50% stenosis threshold for defining significant disease, the Sensitivity/Specificity/PPV/NPV/Accuracy were 65.9/84.9/27.6/96.6/83.4 for CTA_DEBLOOM and 75.0/81.9/26.6/97.4/81.4 for CTA_STAND using a ≥50% threshold. CTA_DEBLOOM specificity was significantly higher than CTA_STAND (84.9% vs. 81.5%, p = 0.03), with no difference between the algorithms in sensitivity (p = 0.22), or accuracy (p = 0.15). These results remained unchanged when a stenosis threshold of ≥70% was used. Interobserver agreement was fair with both techniques (CTA_DEBLOOM k = 0.38, CTA_STAND k = 0.37).ConclusionIn this proof of concept study, coronary calcification deblooming using a prototype post-processing algorithm is feasible and reduces calcium blooming with an improvement of the specificity of the CTA exam.     

Individually adapted, interactive multiplanar reformations vs. semi-automated coronary segmentation and curved planar reformations for stenosis detection in coronary computed tomography angiography

Objective

To evaluate, whether semi-automated vessel extraction and curved planar reformations (“automated vessel extraction”) increases diagnostic accuracy in the detection of relevant coronary artery lesions compared to manual, interactive multiplanar interpretation (“manual approach”).

Materials and methods

50 coronary CT angiography datasets were evaluated by four independent readers (two experienced, two novice) for the presence of stenoses exceeding 50% diameter reduction. One experienced and one novice reader each used the “manual approach” for cases 1–25 and “automated vessel extraction” for cases 26–50, while the other two readers used the complementary method. Results were compared to those of invasive coronary angiography.

Results

Using the “manual approach”, 37 of 42 stenoses were correctly detected by experienced as well as novice readers. 14 vs. 17 lesions were false positive (sensitivity 88%, specificity 91% vs. 89%, PPV 73% vs. 69%, NPV 97%, n.s.). Using “automated vessel extraction”, experienced readers detected 35/42 stenoses compared to 31/42 for novice readers. 7 vs. 11 lesions were missed and 17 vs. 15 false-positive lesions reported (sensitivity 83% vs. 74%, specificity 89% vs. 90%, PPV 67%, NPV 95% vs. 93%, n.s.).In patient-based analysis, for novice readers sensitivity was higher using the “manual approach” (97%, 29/30 pts. vs. 80%, 24/30 pts., p = 0.069).

Conclusions

Semi-automated vessel extraction and curved multiplanar reconstructions do not improve the diagnostic accuracy of coronary CT angiography compared to the use of interactive multiplanar reformations. Especially for less experienced readers, the use of automatically rendered curved multiplanar reconstructions alone cannot be recommended.     

Coronary manifestations of Kawasaki Disease in computed tomography coronary angiography

Coronary arteritis in Kawasaki disease can lead to serious complications such myocardial infarction and sudden death. The identification of coronary manifestations with a method that is minimally invasive and of low radiation exposure is therefore important in paediatric patients with Kawasaki disease. Coronary CT angiography can be an attractive alternative to invasive coronary angiography. This paper describes imaging techniques for coronary CT angiography in pediatric patients and demonstrates the spectrum of cardiovascular manifestations in patients with Kawasaki disease.     

Implications of computed tomography reconstruction algorithms on coronary atheroma quantification: Comparison with intravascular ultrasound

BackgroundAdvances in coronary computed tomography angiography (CCTA) reconstruction algorithms are expected to enhance the accuracy of CCTA plaque quantification. We aim to evaluate different CCTA reconstruction approaches in assessing vessel characteristics in coronary atheroma using intravascular ultrasound (IVUS) as the reference standard.MethodsMatched cross-sections (n ?= ?7241) from 50 vessels in 15 participants with chronic coronary syndrome who prospectively underwent CCTA and 3-vessel near-infrared spectroscopy-IVUS were included. Twelve CCTA datasets per patient were reconstructed using two different kernels, two slice thicknesses (0.75 ?mm and 0.50 ?mm) and three different strengths of advanced model-based iterative reconstruction (IR) algorithms. Lumen and vessel wall borders were manually annotated in every IVUS and CCTA cross-section which were co-registered using dedicated software. Image quality was sub-optimal in the reconstructions with a sharper kernel, so these were excluded. Intraclass correlation coefficient (ICC) and repeatability coefficient (RC) were used to compare the estimations of the 6 CT reconstruction approaches with those derived by IVUS.ResultsSegment-level analysis showed good agreement between CCTA and IVUS for assessing atheroma volume with approach 0.50/5 (slice thickness 0.50 ?mm and highest strength 5 ADMIRE IR) being the best (total atheroma volume ICC: 0.91, RC: 0.67, p ?< ?0.001 and percentage atheroma volume ICC: 0.64, RC: 14.06, p ?< ?0.001). At lesion-level, there was no difference between the CCTA reconstructions for detecting plaques (accuracy range: 0.64–0.67; p ?= ?0.23); however, approach 0.50/5 was superior in assessing IVUS-derived lesion characteristics associated with plaque vulnerability (minimum lumen area ICC: 0.64, RC: 1.31, p ?< ?0.001 and plaque burden ICC: 0.45, RC: 32.0, p ?< ?0.001).ConclusionCCTA reconstruction with thinner slice thickness, smooth kernel and highest strength advanced IR enabled more accurate quantification of the lumen and plaque at a segment-, and lesion-level analysis in coronary atheroma when validated against intravascular ultrasound. Clinicaltrials.gov (NCT03556644)     

Interpreting the evidence: How accurate is coronary computed tomography angiography?

Coronary CT angiography (CTA) has evolved rapidly into a powerful diagnostic tool. More than 30 accuracy studies have reported accuracy results in >2000 patients. A meta-analysis of 29 studies found per-patient accuracy of 96% sensitivity, 74% specificity, 83% positive predictive value, and 94% negative predictive value. Several clinical studies support the safety and accuracy of coronary CTA for acute chest pain, after inconclusive stress testing, and in preoperative evaluation of patients before cardiac valve surgery. Accuracy studies suffer from selection bias because of the inclusion only of patients previously selected to undergo invasive angiography. This increases the incidence of true disease, raising apparent sensitivity and lowering negative predictive value, although the latter remains high at 94%. CTA has relatively low accuracy for the quantitative assessment of stenosis severity. CTA accuracy studies show high figures for sensitivity and negative predictive value in detection of coronary lesions. CTA less accurately shows lesion severity, and intermediate-grade lesions require physiologic evaluation. Clinical studies support the effectiveness of CTA for exclusion of significant coronary disease.     

A method for 3D reconstruction of coronary arteries using biplane angiography and intravascular ultrasound images

The aim of this study is to describe a new method for the three-dimensional reconstruction of coronary arteries and its quantitative validation. Our approach is based on the fusion of the data provided by intravascular ultrasound images (IVUS) and biplane angiographies. A specific segmentation algorithm is used for the detection of the regions of interest in intravascular ultrasound images. A new methodology is also introduced for the accurate extraction of the catheter path. In detail, a cubic B-spline is used for approximating the catheter path in each biplane projection. Each B-spline curve is swept along the normal direction of its X-ray angiographic plane forming a surface. The intersection of the two surfaces is a 3D curve, which represents the reconstructed path. The detected regions of interest in the IVUS images are placed perpendicularly onto the path and their relative axial twist is computed using the sequential triangulation algorithm. Then, an efficient algorithm is applied to estimate the absolute orientation of the first IVUS frame. In order to obtain 3D visualization the commercial package Geomagic Studio 4.0 is used. The performance of the proposed method is assessed using a validation methodology which addresses the separate validation of each step followed for obtaining the coronary reconstruction. The performance of the segmentation algorithm was examined in 80 IVUS images. The reliability of the path extraction method was studied in vitro using a metal wire model and in vivo in a dataset of 11 patients. The performance of the sequential triangulation algorithm was tested in two gutter models and in the coronary arteries (marked with metal clips) of six cadaveric sheep hearts. Finally, the accuracy in the estimation of the first IVUS frame absolute orientation was examined in the same set of cadaveric sheep hearts. The obtained results demonstrate that the proposed reconstruction method is reliable and capable of depicting the morphology of coronary arteries.     

Coronary CT angiography versus intravascular ultrasound for estimation of coronary stenosis and atherosclerotic plaque burden: A meta-analysis

BackgroundNumerous studies have compared coronary CT angiography (CTA) with quantitativecoronary angiography. However, the ability of coronary CTA to identify atherosclerosis and to accurately measure plaque and coronary area and volume measurements as compared with intravascular ultrasound (IVUS) has not been fully defined.ObjectiveWe sought to assess the ability of coronary CTA to quantify coronary and plaque measurements commonly performed with IVUS.MethodsWe searched multiple databases for diagnostic studies that directly compared coronary CTA and IVUS for coronary plaque detection, vessel luminal area, percentage of area stenosis, plaque area, and plaque volume. We used a bivariate mixed-effects binomial regression model to pool test sensitivity and specificity for detection of any coronary plaque.ResultsForty-two studies that evaluated 1360 patients (75% men; mean age, 59 years) were identified. No significant difference was found between coronary CTA and IVUS measurements of vessel lumen cross-sectional area, plaque area, percentage of area stenosis, or plaque volume within the overall cohort and no difference for the measurement of cross-sectional area (n = 5 studies) and plaque volume (n = 8 studies) among a subgroup that used automated or semiautomated measurement techniques. Sensitivity and specificity of coronary CTA to detect any plaque compared with IVUS were 93% and 92%, respectively, with an area under the receiver-operating curve of 0.97.ConclusionsCompared with IVUS, coronary CTA appears to be highly accurate for estimation of luminal area, percentage of area stenosis, plaque volume, and plaque area and for detection of plaque. The use of automated vessel and stenosis measurements appears promising in limited studies to date.     

Multislice computed tomography: angiographic emulation versus standard assessment for detection of coronary stenoses

The present study investigated angiographic emulation of multislice computed tomography (MSCT) (catheter-like visualization) as an alternative approach of analyzing and visualizing findings in comparison with standard assessment. Thirty patients (120 coronary arteries) were randomly selected from 90 prospectively investigated patients with suspected coronary artery disease who underwent MSCT (16-slice scanner, 0.5 mm collimation, 400 ms rotation time) prior to conventional coronary angiography for comparison of both approaches. Sensitivity and specificity of angiographic emulation [81% (26/32) and 93% (82/88)] were not significantly different from those of standard assessment [88% (28/32) and 99% (87/88)], while the per-case analysis time was significantly shorter for angiographic emulation than for standard assessment (3.4 ± 1.5 vs 7.0 ± 2.5 min, P < 0.001). Both interventional and referring cardiologists preferred angiographic emulation over standard curved multiplanar reformations of MSCT coronary angiography for illustration, mainly because of improved overall lucidity and depiction of sidebranches (P < 0.001). In conclusion, angiographic emulation of MSCT reduces analysis time, yields a diagnostic accuracy comparable to that of standard assessment, and is preferred by cardiologists for visualization of results.     

Assessing the value of coronary artery computed tomography as the first-line anatomical test for stable patients with indications for invasive angiography due to suspected coronary artery disease. Initial cost analysis in the CAT-CAD randomized trial

BackgroundClinical and safety outcomes of the strategy employing coronary computed tomography angiography (CCTA) as the first-choice imaging test have recently been demonstrated in the recently published CAT-CAD randomized, prospective, single-center study. Based on prospectively collected data in this patient population, we aimed to perform an initial cost analysis of this approach.Methods120 participants of the CAT-CAD trial (age:60.6 ± 7.9 years, 35% female) were included in the analysis. We analyzed medical resource use during the diagnostic and therapeutic episode of care. We prospectively estimated the cumulative cost for each strategy by multiplying the number of resources by standardized costs in accordance to medical databases and the 2015 Procedural Reimbursement Payment Guide.ResultsThe total cost of coronary artery disease (CAD) diagnosis was significantly lower in the CCTA group as compared to the direct invasive coronary angiography (ICA) group ($50,176 vs $137,032) with corresponding per-patient cost of $836 vs $2,284, respectively. Similarly, the entire diagnostic and therapeutic episode of care was significantly less expensive in the CCTA group ($227,622 vs $502,827) with corresponding per-patient cost of $4630 vs $8,380, respectively. Overall, the application of CCTA as a first-line diagnostic test in stable patients with indications to ICA resulted in a 63% reduction of CAD diagnosis costs and a 55% reduction composite of diagnosis and treatment costs during 90-days follow-up.ConclusionsApplication of CCTA as the first-line anatomic test in patients with suspected significant CAD decreased the total costs of diagnosis. This is likely attributable to reduced numbers of invasive tests and hospitalisations. Initial cost analysis of the CAT-CAD randomized trial suggests that this approach may provide significant cost savings for the entire health system.     

冠状动脉CT血管成像和运动平板试验对冠心病患者的诊断比较

目的:评价冠状动脉CT血管成像(CCTA)和运动平板试验(TET)对冠心病的诊断价值。方法:以常规冠状动脉造影(CAG)为诊断冠心病(冠脉狭窄≥50%)的"金标准",对同期先后行TET、CCTA和CAG 3种检查的75例疑似冠心病患者进行回顾性分析,将其TET和CCTA的结果与CAG进行比较。结果:TET和CCTA诊断冠心病的敏感度分别为45.2%和90.5%,特异度为69.7%和93.9%,阳性预测值为65.5%和95.0%,阴性预测值为50.0%和88.6%,准确率为56.0%和92.0%,P<0.01。在冠状动脉血管水平CCTA对右冠状动脉、左主干、前降支、回旋支狭窄诊断的准确率分别为86.7%、100.0%、88.0%和76.0%。冠心病患者中TET诊断阳性率与病变血管支数呈正相关(r=0.440,P=0.004);冠心病患者TET诊断结果阳性与阴性仅与血管狭窄程度≥75%狭窄的节段数目有统计学差异(P=0.016)。结论:CCTA诊断冠心病较TET有更高的诊断准确性和较低的诊断假阳性和假阴性,对有症状的疑诊冠心病患者CCTA的诊断具有更重要作用。     

64层螺旋CT冠状动脉成像临床应用评价

目的:评价64层螺旋CT冠状动脉成像(64SCTCA)的图像质量和在诊断冠状动脉疾病的临床价值。方法:搜集35例患者64SCTCA的完整资料,并以近期实施的选择性X线冠状动脉成像(SCA)结果为金标准进行对比,对64SCTCA显示的冠状动脉主支及主要分支情况进行分级评估。结果:35例病例可用于评估的冠状动脉共计368支,成功率达95.6%。其中SCA共显示74个节段冠脉有中、重度狭窄(≥50%)。MSCTCA诊断中重度狭窄的敏感性为86.5%,特异性为97.3%,阳性预测值88.9%,阴性预测值96.6%。经配对χ2检验,P>0.05,证明两种检查方法在发现冠状动脉病变方面差异无统计学意义。结论:64层螺旋CT冠状动脉成像是一种无创、快速的成像方法,对诊断冠状动脉≥50%狭窄有较高的敏感性和特异性,适合用于临床怀疑冠心病的患者SCA前的筛选检查。     

Effect of tube potential and luminal contrast attenuation on atherosclerotic plaque attenuation by coronary CT angiography: In vivo comparison with intravascular ultrasound

BackgroundIt has been shown that CT attenuation of noncalcified plaques depends on luminal contrast attenuation (LCA). Although tube potential (kilovolt [kV]) has been shown to exert influence on plaque attenuation through LCA as well as its direct effects, in-vivo studies have not investigated plaque attenuation at lower tube potentials less than 120 kV. We sought to evaluate the effect of kV and LCA on thresholds for lipid-rich and fibrous plaques as defined by intravascular ultrasound (IVUS).MethodsCT attenuation of IVUS-defined plaque components (lipid-rich, fibrous, and calcified plaques) were quantified in 52 consecutive patients with unstable angina, who had coronary CT angiography performed at 100 kV (n = 25) or 120 kV (n = 27) using kV-adjusted contrast protocol prior to IVUS. CT attenuation of plaque components was compared between the two groups.ResultsLCA was similar in the 100-kV and 120-kV groups (417.6 ± 83.7 Hounsfield Units [HU] vs 421.3 ± 54.9 HU, p = 0.77). LCA correlated with CT attenuation of lipid-rich (r = 0.49, p = 0.001) and fibrous plaques (r = 0.32, p < 0.05), but not with that of calcified plaques (r = 0.04, p = 0.81). When plaque attenuation was normalized to LCA, lipid-rich (0.087 ± 0.036, range −0.012–0.147) and fibrous plaque attenuation (0.234 ± 0.056, range 0.153–0.394) were distinct (p < 0.001) with no overlap for both kV groups. CT attenuation was not significantly different between 100-kV and 120-kV groups for lipid-rich (34.0 ± 21.5 vs 39.3 ± 12.9, p = 0.33) or fibrous plaques (95.4 ± 19.1 vs 97.6 ± 22.0, p = 0.75).ConclusionPlaque attenuation thresholds for non-calcified plaque components should be adjusted based on LCA. Further adjustment may not be required for different tube potentials.     

Role of 320-slice multislice computed tomography coronary angiography in the assessment of coronary artery stenosis

Objective

To evaluate the effectiveness of the multislice CT coronary angiography, as a non-invasive imaging tool in assessment of coronary artery stenosis.

Patients and methods

The study included 50 patients who were referred for MSCT coronary angiography followed by catheter coronary angiography. Patients with previous coronary bypass grafts and those with coronary stents were excluded. History of contrast allergy, renal impairment and severe chest conditions were exclusion criteria. The coronary angiographic CT studies were performed using a 320 CT scanner. The catheter coronary angiographic studies were performed via femoral arterial puncture. The results of CT angiography were compared with the gold standard catheter angiography.

Results

The positive predictive value and negative predictive value of MSCT coronary angiography in detection of coronary artery stenosis were 94% and 100%, respectively.

Conclusion

In conclusion, MSCT coronary angiography is a very helpful and rapid non-invasive coronary imaging modality that was able to detect and grade coronary artery stenosis better than other noninvasive examinations used to detect CAD, such as exercise stress testing. Due to its very high negative predictive value, it may eliminate the need for invasive coronary procedures in the presence of normal coronary imaging.     

Determination of optimal fluoroscopic angulations for aorto-coronary ostial interventions from coronary computed tomography angiography

BackgroundAn optimal aorto-coronary angiographic projection, characterized by an orthogonal visualization of the proximal coronary artery, is crucial for interventional success. We determined the distribution of optimal C-arm positions and assessed their feasibility by invasive coronary angiography.MethodsOrthogonal aorto-coronary ostial angulations were determined in 310 CT data sets. In 100 patients undergoing subsequent invasive angiography, we assessed if the CT-predicted angulations were achievable by the C-arm system. If the predicted projection was not achievable due to mechanical constraints of the C-arm system, the most close, achievable angulation was determined. Patient characteristics were analyzed regarding the distribution of optimal angulations and its feasibility by the C-arm system.ResultsFor the left ostium, CT revealed a mean angulation of LAO 23 ?± ?21°/cranial 25 ?± ?23° (90% of patients with a LAO/cranial angulation, 3% LAO/caudal, 4% RAO/cranial, 3% RAO/caudal) and were achievable by the C-arm system in 87% of patients. For the right ostium, the mean CT-predicted orthogonal angulation was LAO 36 ?± ?37°/cranial 36 ?± ?51° (84% LAO/cranial, 2% LAO/caudal, 14% RAO/caudal) and achievable by the C-arm system in 45% of patients. For the left ostium, a higher body weight was associated with a steeper LAO/cranial angulation being less feasible by the C-arm system due to mechanical constraints.ConclusionsOrthogonal aorto-left coronary angulations show a relative narrow distribution predominately in LAO/cranial position whereas a wider range of angulations was found for the right coronary ostium. The feasibility of CT-predicted angulations by the C-arm system is more restricted for the right than the left coronary ostium.