Model-based nonlinear inverse reconstruction for T2 mapping using highly undersampled spin-echo MRI

Purpose:

To develop a model‐based reconstruction technique for T2 mapping based on multi‐echo spin‐echo MRI sequences with highly undersampled Cartesian data encoding.

Materials and Methods:

The proposed technique relies on a nonlinear inverse reconstruction algorithm which directly estimates a T2 and spin‐density map from a train of undersampled spin echoes. The method is applicable to acquisitions with single receiver coils but benefits from multi‐element coil arrays. The algorithm is validated for trains of 16 spin echoes with a spacing of 10 to 12 ms using numerical simulations as well as human brain MRI at 3 Tesla (T).

Results:

When compared with a standard T2 fitting procedure using fully sampled T2‐weighted images, and depending on the available signal‐to‐noise ratio and number of coil elements, model‐based nonlinear inverse reconstructions for both simulated and in vivo MRI data yield accurate T2 estimates for undersampling factors of 5 to 10.

Conclusion:

This work describes a promising strategy for T2‐weighted MRI that simultaneously offers accurate T2 relaxation times and properly T2‐weighted images at arbitrary echo times. For a standard spin‐echo MRI sequence with Cartesian encoding, the method allows for a much higher degree of undersampling than obtainable by conventional parallel imaging. J. Magn. Reson. Imaging 2011;. © 2011 Wiley‐Liss, Inc.     

T2‐weighted 3D fast spin echo imaging with water–fat separation in a single acquisition

Purpose:

To develop a robust 3D fast spin echo (FSE) T₂‐weighted imaging method with uniform water and fat separation in a single acquisition, amenable to high‐quality multiplanar reformations.

Materials and Methods:

The Iterative Decomposition of water and fat with Echo Asymmetry and Least squares estimation (IDEAL) method was integrated with modulated refocusing flip angle 3D‐FSE. Echoes required for IDEAL processing were acquired by shifting the readout gradient with respect to the Carr‐Purcell‐Meiboom‐Gill echo. To reduce the scan time, an alternative data acquisition using two gradient echoes per repetition was implemented. Using the latter approach, a total of four gradient echoes were acquired in two repetitions and used in the modified IDEAL reconstruction.

Results:

3D‐FSE T₂‐weighted images with uniform water–fat separation were successfully acquired in various anatomies including breast, abdomen, knee, and ankle in clinically feasible scan times, ranging from 5:30–8:30 minutes. Using water‐only and fat‐only images, in‐phase and out‐of‐phase images were reconstructed.

Conclusion:

3D‐FSE‐IDEAL provides volumetric T₂‐weighted images with uniform water and fat separation in a single acquisition. High‐resolution images with multiple contrasts can be reformatted to any orientation from a single acquisition. This could potentially replace 2D‐FSE acquisitions with and without fat suppression and in multiple planes, thus improving overall imaging efficiency. J. Magn. Reson. Imaging 2010;32:745–751. © 2010 Wiley‐Liss, Inc.     

Single breath‐hold assessment of ventricular volumes using 32‐channel coil technology and an extracellular contrast agent

Purpose:

To evaluate the feasibility of a single breath‐hold 3D cine balanced steady‐state free precession (b‐SSFP) sequence after gadolinium diethylenetriamine penta‐acetic acid (Gd‐DTPA) injection for volumetric cardiac assessment.

Materials and Methods:

Fifteen adult patients routinely referred for cardiac magnetic resonance imaging (MRI) underwent quantitative ventricular volumetry on a clinical 1.5T MR‐scanner using a 32‐channel cardiac coil. A stack of 2D cine b‐SSFP slices covering the ventricles was used as reference, followed by a single breath‐hold 3D cine balanced SSFP protocol acquired before and after administration of Gd‐DTPA. The acquisition was accelerated using SENSE in both phase encoding directions. Volumetric and contrast‐to‐noise data for each technique were assessed and compared.

Results:

The 3D cine protocol was accomplished within one breath‐hold (mean acquisition time 20 sec; spatial resolution 2.1 × 2.1 × 10 mm; temporal resolution 51 msec). The contrast‐to‐noise ratio between blood and myocardium was 234 determined for the multiple 2D cine data, and could be increased for the 3D acquisition from 136 (3D precontrast) to 203 (3D postcontrast) after injecting Gd‐DTPA. In addition the endocardial definition was significantly improved in postcontrast 3D cine b‐SSFP. There was no significant difference for left and right ventricular volumes between standard 2D and 3D postcontrast cine b‐SSFP. However, Bland–Altman plots showed greater bias and scatter when comparing 2D with 3D cine b‐SSFP without contrast.

Conclusion:

3D cine b‐SSFP imaging of the heart using 32 channel coil technology and spatial undersampling allows reliable volumetric assessment within a single breath‐hold after application of Gd‐DTPA. J. Magn. Reson. Imaging 2010;31:838–844. ©2010 Wiley‐Liss, Inc.     

Improving quality of arterial spin labeling MR imaging at 3 Tesla with a 32-channel coil and parallel imaging

Purpose:

To compare 12‐channel and 32‐channel phased‐array coils and to determine the optimal parallel imaging (PI) technique and factor for brain perfusion imaging using Pulsed Arterial Spin labeling (PASL) at 3 Tesla (T).

Materials and Methods:

Twenty‐seven healthy volunteers underwent 10 different PASL perfusion PICORE Q2TIPS scans at 3T using 12‐channel and 32‐channel coils without PI and with GRAPPA or mSENSE using factor 2. PI with factor 3 and 4 were used only with the 32‐channel coil. Visual quality was assessed using four parameters. Quantitative analyses were performed using temporal noise, contrast‐to‐noise and signal‐to‐noise ratios (CNR, SNR).

Results:

Compared with 12‐channel acquisition, the scores for 32‐channel acquisition were significantly higher for overall visual quality, lower for noise and higher for SNR and CNR. With the 32‐channel coil, artifact compromise achieved the best score with PI factor 2. Noise increased, SNR and CNR decreased with PI factor. However mSENSE 2 scores were not always significantly different from acquisition without PI.

Conclusion:

For PASL at 3T, the 32‐channel coil at 3T provided better quality than the 12‐channel coil. With the 32‐channel coil, mSENSE 2 seemed to offer the best compromise for decreasing artifacts without significantly reducing SNR, CNR. J. Magn. Reson. Imaging 2012;35:1233‐1239. © 2012 Wiley Periodicals, Inc.     

High-resolution 7T MRI of the human hippocampus in vivo

Purpose

To describe an initial experience imaging the human hippocampus in vivo using a 7T magnetic resonance (MR) scanner and a protocol developed for very high field neuroimaging.

Materials and Methods

Six normal subjects were scanned on a 7T whole body MR scanner equipped with a 16‐channel head coil. Sequences included a full field of view T1‐weighted 3D turbo field echo (T1W 3D TFE: time of acquisition (TA) = 08:58), T2*‐weighted 2D fast field echo (T2*W 2D FFE: TA = 05:20), and susceptibility‐weighted imaging (SWI: TA = 04:20). SWI data were postprocessed using a minimum intensity projection (minIP) algorithm. Total imaging time was 23 minutes.

Results

T1W 3D TFE images with 700 μm isotropic voxels provided excellent anatomic depiction of macroscopic hippocampal structures. T2*W 2D FFE images with 0.5 mm in‐plane resolution and 2.5 mm slice thickness provided clear discrimination of the Cornu Ammonis and the compilation of adjacent sublayers of the hippocampus. SWI images (0.5 mm in‐plane resolution, 1.0 mm slice thickness) delineated microvenous anatomy of the hippocampus.

Conclusion

In vivo 7T MR imaging can take advantage of higher signal‐to‐noise and novel contrast mechanisms to provide increased conspicuity of hippocampal anatomy. J. Magn. Reson. Imaging 2008;28:1266–1272. © 2008 Wiley‐Liss, Inc.     

High-resolution ultrashort echo time (UTE) imaging on human knee with AWSOS sequence at 3.0 T

Purpose:

To demonstrate the technical feasibility of high‐resolution (0.28–0.14 mm) ultrashort echo time (UTE) imaging on human knee at 3T with the acquisition‐weighted stack of spirals (AWSOS) sequence.

Materials and Methods:

Nine human subjects were scanned on a 3T MRI scanner with an 8‐channel knee coil using the AWSOS sequence and isocenter positioning plus manual shimming.

Results:

High‐resolution UTE images were obtained on the subject knees at TE = 0.6 msec with total acquisition time of 5.12 minutes for 60 slices at an in‐plane resolution of 0.28 mm and 10.24 minutes for 40 slices at an in‐plane resolution of 0.14 mm. Isocenter positioning, manual shimming, and the 8‐channel array coil helped minimize image distortion and achieve high signal‐to‐noise ratio (SNR).

Conclusion:

It is technically feasible on a clinical 3T MRI scanner to perform UTE imaging on human knee at very high spatial resolutions (0.28–0.14 mm) within reasonable scan time (5–10 min) using the AWSOS sequence. J. Magn. Reson. Imaging 2012;35:204‐210. © 2011 Wiley Periodicals, Inc.     

Half‐fourier‐acquisition single‐shot turbo spin‐echo (HASTE) MRI of the lung at 3 Tesla using parallel imaging with 32‐receiver channel technology

Purpose

To assess the feasibility of half‐Fourier‐acquisition single‐shot turbo spin‐echo (HASTE) of the lung at 3 Tesla (T) using parallel imaging with a prototype of a 32‐channel torso array coil, and to determine the optimum acceleration factor for the delineation of intrapulmonary anatomy.

Materials and Methods

Nine volunteers were examined on a 32‐channel 3T MRI system using a prototype 32‐channel‐torso‐array‐coil. HASTE‐MRI of the lung was acquired at both, end‐inspiratory and end‐expiratory breathhold with parallel imaging (Generalized autocalibrating partially parallel acquisitions = GRAPPA) using acceleration factors ranging between R = 1 (TE = 42 ms) and R = 6 (TE = 16 ms). The image quality of intrapulmonary anatomy and subjectively perceived noise level was analyzed by two radiologists in consensus. In addition quantitative measurements of the signal‐to‐noise ratio (SNR) of HASTE with different acceleration factors were assessed in phantom measurements.

Results

Using an acceleration factor of R = 4 image blurring was substantially reduced compared with lower acceleration factors resulting in sharp delineation of intrapulmonary structures in expiratory scans. For inspiratory scans an acceleration factor of 2 provided the best image quality. Expiratory scans had a higher subjectively perceived SNR than inspiratory scans.

Conclusion

Using optimized multi‐element coil geometry HASTE‐MRI of the lung is feasible at 3T with acceleration factors up to 4. Compared with nonaccelerated acquisitions, shorter echo times and reduced image blurring are achieved. Expiratory scanning may be favorable to compensate for susceptibility associated signal loss at 3T. J. Magn. Reson. Imaging 2009;30:541–546. © 2009 Wiley‐Liss, Inc.     

Accelerated slice encoding for metal artifact correction

Purpose:

To demonstrate accelerated imaging with both artifact reduction and different contrast mechanisms near metallic implants.

Materials and Methods:

Slice‐encoding for metal artifact correction (SEMAC) is a modified spin echo sequence that uses view‐angle tilting and slice‐direction phase encoding to correct both in‐plane and through‐plane artifacts. Standard spin echo trains and short‐TI inversion recovery (STIR) allow efficient PD‐weighted imaging with optional fat suppression. A completely linear reconstruction allows incorporation of parallel imaging and partial Fourier imaging. The signal‐to‐noise ratio (SNR) effects of all reconstructions were quantified in one subject. Ten subjects with different metallic implants were scanned using SEMAC protocols, all with scan times below 11 minutes, as well as with standard spin echo methods.

Results:

The SNR using standard acceleration techniques is unaffected by the linear SEMAC reconstruction. In all cases with implants, accelerated SEMAC significantly reduced artifacts compared with standard imaging techniques, with no additional artifacts from acceleration techniques. The use of different contrast mechanisms allowed differentiation of fluid from other structures in several subjects.

Conclusion:

SEMAC imaging can be combined with standard echo‐train imaging, parallel imaging, partial‐Fourier imaging, and inversion recovery techniques to offer flexible image contrast with a dramatic reduction of metal‐induced artifacts in scan times under 11 minutes. J. Magn. Reson. Imaging 2010;31:987–996. ©2010 Wiley‐Liss, Inc.     

Susceptibility weighted imaging with multiple echoes

Purpose:

To extend susceptibility weighted imaging (SWI) to multiple echoes with an adapted homodyne filtering of phase images for the computation of venograms with improved signal to noise ratio (SNR) and contrast to noise ratio (CNR) and to produce high resolution maps of R₂* relaxation.

Materials and Methods:

Three‐dimensional multi echo gradient echo data were acquired with five equidistant echoes ranging from 13 to 41 ms. The phase images of each echo were filtered with filter parameters adjusted to the echo time, converted into a phase mask, and combined with the corresponding magnitude images to obtain susceptibility weighted images. The individual images were then averaged. Conventional single echo data were acquired for comparison. Maps of R₂* relaxation rates were computed from the magnitude data. Field maps derived from the phase data were used to correct R₂* for the influences from background inhomogeneities of the static magnetic field.

Results:

Compared with the single echo images, the combined images had an increase in SNR by 46% and an improvement in CNR by 34 to 80%, improved visibility of small venous vessels and reduced blurring along the readout direction. The R₂* values of different tissue types are in good agreement with values from the literature.

Conclusion:

Acquisition of SWI with multiple echoes leads to an increase in SNR and CNR and it allows the computation of high resolution maps of R₂* relaxation. J. Magn. Reson. Imaging 2010;31:185–191. © 2009 Wiley‐Liss, Inc.     

Multiecho time‐resolved acquisition (META): A high spatiotemporal resolution dixon imaging sequence for dynamic contrast‐enhanced MRI

Purpose

To evaluate a new dynamic contrast‐enhanced (DCE) imaging technique called multiecho time‐resolved acquisition (META) for abdominal/pelvic imaging. META combines an elliptical centric time‐resolved three‐dimensional (3D) spoiled gradient‐recalled echo (SPGR) imaging scheme with a Dixon‐based fat‐water separation algorithm to generate high spatiotemporal resolution volumes.

Materials and Methods

Twenty‐three patients referred for hepatic metastases or renal masses were imaged using the new META sequence and a conventional fat‐suppressed 3D SPGR sequence on a 3T scanner. In 12 patients, equilibrium‐phase 3D SPGR images acquired immediately after META were used for comparing the degree and homogeneity of fat suppression, artifacts, and overall image quality. In the remaining 11 of 23 patients, DCE 3D SPGR images acquired in a previous or subsequent examination were used for comparing the efficiency of arterial phase capture in addition to the qualitative analysis for the degree and homogeneity of fat suppression, artifacts, and overall image quality.

Results

META images were determined to be significantly better than conventional 3D SPGR images for degree and uniformity of fat suppression and ability to visualize the arterial phase. There were no significant differences in artifact levels or overall image quality.

Conclusion

META is a promising high spatiotemporal resolution imaging sequence for capturing the fast dynamics of hyperenhancing hepatic lesions and provides robust fat suppression even at 3T. J. Magn. Reson. Imaging 2009. © 2009 Wiley‐Liss, Inc.     

Accelerated noncontrast-enhanced pulmonary vein MRA with distributed compressed sensing

Purpose:

To investigate the efficacy of distributed compressed sensing (CS) to accelerate free‐breathing, electrocardiogram (ECG)‐triggered noncontrast pulmonary vein (PV) magnetic resonance angiography (MRA).

Materials and Methods:

Fully sampled ECG‐triggered noncontrast PV MRA, using a spatially selective slab inversion preparation sequence, was acquired on seven healthy adult subjects (27 ± 17 years, range: 19–65 years, 4 women). The k‐space data were retrospectively randomly undersampled by factors of 2, 4, 6, 8, and 10 and then reconstructed using distributed CS and coil‐by‐coil CS methods. The reconstructed images were evaluated by two blinded readers in consensus for assessment of major PV branches as well as the presence of artifacts in left atrium (LA) and elsewhere. Diameters of right inferior and right superior PV branches were measured. Additionally, mean square errors (MSE) of the reconstructions were calculated.

Results:

Both CS methods resulted in image quality scores similar to the fully sampled reference images at undersampling factors up to 6‐fold for distributed CS and 4‐fold for coil‐by‐coil CS reconstructions. There was no difference in the presence of artifacts in LA and freedom from important artifacts elsewhere between the two techniques up to undersampling factors of 10 compared to the fully sampled reconstruction. For the PV diameters, no systematic variation between the reference and the reconstructions were observed for either technique. There were no significant differences in MSE between the two methods when compared at a given rate, but the difference was significant when compared across all rates.

Conclusion:

The sparsity of noncontrast PV MRA and the joint sparsity of different coil images allow imaging at high undersampling factors (up to 6‐fold) when distributed CS is used. J. Magn. Reson. Imaging 2011;33:1248–1255. © 2011 Wiley‐Liss, Inc.     

3D diffusion tensor MRI with isotropic resolution using a steady‐state radial acquisition

Purpose

To obtain diffusion tensor images (DTI) over a large image volume rapidly with 3D isotropic spatial resolution, minimal spatial distortions, and reduced motion artifacts, a diffusion‐weighted steady‐state 3D projection (SS 3DPR) pulse sequence was developed.

Materials and Methods

A diffusion gradient was inserted in a SS 3DPR pulse sequence. The acquisition was synchronized to the cardiac cycle, linear phase errors were corrected along the readout direction, and each projection was weighted by measures of consistency with other data. A new iterative parallel imaging reconstruction method was also implemented for removing off‐resonance and undersampling artifacts simultaneously.

Results

The contrast and appearance of both the fractional anisotropy and eigenvector color maps were substantially improved after all correction techniques were applied. True 3D DTI datasets were obtained in vivo over the whole brain (240 mm field of view in all directions) with 1.87 mm isotropic spatial resolution, six diffusion encoding directions in under 19 minutes.

Conclusion

A true 3D DTI pulse sequence with high isotropic spatial resolution was developed for whole brain imaging in under 20 minutes. To minimize the effects of brain motion, a cardiac synchronized, multiecho, DW‐SSFP pulse sequence was implemented. Motion artifacts were further reduced by a combination of linear phase correction, corrupt projection detection and rejection, sampling density reweighting, and parallel imaging reconstruction. The combination of these methods greatly improved the quality of 3D DTI in the brain. J. Magn. Reson. Imaging 2009;29:1175–1184. © 2009 Wiley‐Liss, Inc.     

Single breathhold cardiac CINE imaging with multi‐echo three‐dimensional hybrid radial SSFP acquisition

Purpose:

To achieve single breathhold whole heart cardiac CINE imaging with improved spatial resolution and temporal resolution by using a multi‐echo three‐dimensional (3D) hybrid radial SSFP acquisition.

Materials and Methods:

Multi‐echo 3D hybrid radial SSFP acquisitions were used to acquire cardiac CINE imaging within a single breathhold. An optimized interleaving scheme was developed for view ordering throughout the cardiac cycle.

Results:

Whole heart short axis views were acquired with a spatial resolution of 1.3 × 1.3 × 8.0 mm³ and temporal resolution of 45 ms, within a single 17 s breathhold. The technique was validated on eight healthy volunteers by measuring the left ventricular volume throughout the cardiac cycle and comparing with the conventional 2D multiple breathhold technique. The left ventricle functional measurement bias of our proposed 3D technique from the conventional 2D technique: end diastolic volume ?3.3 mL ± 13.7 mL, end systolic volume 1.4 mL ± 6.1 mL, and ejection fraction ?1.7% ± 4.3%, with high correlations 0.94, 0.97, and 0.91, accordingly.

Conclusion:

A multi‐echo 3D hybrid radial SSFP acquisition was developed to allow for a whole heart cardiac CINE exam in a single breathhold. Cardiac function measurements in volunteers compared favorably with the standard multiple breathhold exams. J. Magn. Reson. Imaging 2010;32:434–440. © 2010 Wiley‐Liss, Inc.

     

Comparison of k‐t SENSE/k‐t BLAST with conventional SENSE applied to BOLD fMRI

Purpose:

To compare k‐t BLAST (broad‐use linear‐acquisition speedup technique)/k‐t SENSE (sensitivity encoding) with conventional SENSE applied to a simple fMRI paradigm.

Materials and Methods:

Blood oxygen level‐dependent (BOLD) functional magnetic resonance imaging (fMRI) was performed at 3 T using a displaced ultra‐fast low‐angle refocused echo (UFLARE) pulse sequence with a visual stimulus in a block paradigm. Conventional SENSE and k‐t BLAST/k‐t SENSE data were acquired. Also, k‐t BLAST/k‐t SENSE was simulated at different undersampling factors from fully sampled data after removal of lines of k‐space data. Analysis was performed using SPM5.

Results:

Sensitivity to the BOLD response in k‐t BLAST/k‐t SENSE was comparable with that of SENSE in images acquired at an undersampling factor of 2.3. Simulated k‐t BLAST/k‐t SENSE yielded reliable detection of activation‐induced BOLD contrast at undersampling factors of 5 or less. Sensitivity increased significantly when training data were included in k‐space before Fourier transformation (known as “plug‐in”).

Conclusion:

k‐t BLAST/k‐t SENSE performs at least as well as conventional SENSE for BOLD fMRI at a modest undersampling factor. Results suggest that sufficient sensitivity to BOLD contrast may be achievable at higher undersampling factors with k‐t BLAST/k‐t SENSE than with conventional parallel imaging approaches, offering particular advantages at the highest magnetic field strengths. J. Magn. Reson. Imaging 2010;32:235–241. © 2010 Wiley‐Liss, Inc.     

Controlled aliasing in parallel imaging results in higher acceleration (CAIPIRINHA) for multi-slice imaging.

In all current parallel imaging techniques, aliasing artifacts resulting from an undersampled acquisition are removed by means of a specialized image reconstruction algorithm. In this study a new approach termed "controlled aliasing in parallel imaging results in higher acceleration" (CAIPIRINHA) is presented. This technique modifies the appearance of aliasing artifacts during the acquisition to improve the subsequent parallel image reconstruction procedure. This new parallel multi-slice technique is more efficient compared to other multi-slice parallel imaging concepts that use only a pure postprocessing approach. In this new approach, multiple slices of arbitrary thickness and distance are excited simultaneously with the use of multi-band radiofrequency (RF) pulses similar to Hadamard pulses. These data are then undersampled, yielding superimposed slices that appear shifted with respect to each other. The shift of the aliased slices is controlled by modulating the phase of the individual slices in the multi-band excitation pulse from echo to echo. We show that the reconstruction quality of the aliased slices is better using this shift. This may potentially allow one to use higher acceleration factors than are used in techniques without this excitation scheme. Additionally, slices that have essentially the same coil sensitivity profiles can be separated with this technique.     

Increased SNR and reduced distortions by averaging multiple gradient echo signals in 3D FLASH imaging of the human brain at 3T

Purpose

To demonstrate how averaging of multiple gradient echoes can improve high‐resolution FLASH (fast low angle shot) magnetic resonance imaging (MRI) of the human brain.

Materials and Methods

3D‐FLASH with multiple bipolar echoes was studied by simulation and in three experiments on human brain at 3T. First, the repetition time (TR) was increased by the square of the flip angle to maintain contrast as derived by theory. Then the number of echoes was increased at constant TR with bandwidths between 110 and 1370 Hz/pixel. Finally, signals of a 12‐echo acquisition train (echo times 4.9–59 msec) were averaged consecutively to study the increase in SNR.

Results

At unchanged contrast, the signal increased proportionally with flip angle and sqrt(TR). Increasing the bandwidth improved delineation of the basal cortex and vessels, while most of the loss in the signal‐to‐noise ratio (SNR) was recovered by averaging. Consecutive averaging increased the SNR to reach maximum efficiency at an echo train length corresponding roughly to T.

Conclusion

SNR is gained efficiently by acquiring additional echoes and increasing TR (and flip angle accordingly to maintain contrast) until the associated T loss in the averaged signal consumes the sqrt(TR) increase in the steady state. A bandwidth of 350 Hz/pixel or higher and echo trains shorter than T are recommended. J. Magn. Reson. Imaging 2009;29:198–204. © 2008 Wiley‐Liss, Inc.     

Fast‐spin‐echo imaging of inner fields‐of‐view with 2D‐selective RF excitations

Purpose:

To demonstrate the feasibility of two‐dimensional selective radio frequency (2DRF) excitations for fast‐spin‐echo imaging of inner fields‐of‐view (FOVs) in order to shorten acquisitions times, decrease RF energy deposition, and reduce image blurring.

Materials and Methods:

Fast‐spin‐echo images (in‐plane resolution 1.0 × 1.0 mm² or 0.5 × 1.0 mm²) of inner FOVs (40 mm, 16 mm oversampling) were obtained in phantoms and healthy volunteers on a 3 T whole‐body MR system using blipped‐planar 2DRF excitations.

Results:

Positioning the unwanted side excitations in the blind spot between the image section and the slice stack to measure yields minimum 2DRF pulse durations (about 6 msec) that are compatible with typical echo spacings of fast‐spin‐echo acquisitions. For the inner FOVs, the number of echoes and refocusing RF pulses is considerably reduced which compared to a full FOV (182 mm) reduces the RF energy deposition by about a factor of three and shortens the acquisition time, e.g., from 39 seconds to 12 seconds for a turbo factor of 15 or from 900 msec to 280 msec for a single‐shot acquisition, respectively. Furthermore, image blurring occurring for high turbo factors as in single‐shot acquisitions is considerably reduced yielding effectively higher in‐plane resolutions.

Conclusion:

Inner‐FOV acquisitions using 2DRF excitations may help to shorten acquisitions times, ameliorate image blurring, and reduce specific absorption rate (SAR) limitations of fast‐spin‐echo (FSE) imaging, in particular at higher static magnetic fields. J. Magn. Reson. Imaging 2010;31:1530–1537. © 2010 Wiley‐Liss, Inc.     

DREAM-a novel approach for robust, ultrafast, multislice B(1) mapping

A novel multislice B₁‐mapping method dubbed dual refocusing echo acquisition mode is proposed, able to cover the whole transmit coil volume in only one second, which is more than an order of magnitude faster than established approaches. The dual refocusing echo acquisition mode technique employs a stimulated echo acquisition mode (STEAM) preparation sequence followed by a tailored single‐shot gradient echo sequence, measuring simultaneously the stimulated echo and the free induction decay as gradient‐recalled echoes, and determining the actual flip angle of the STEAM preparation radiofrequency pulses from the ratio of the two measured signals. Due to an elaborated timing scheme, the method is insensitive against susceptibility/chemical shift effects and can deliver a B₀ phase map and a transceive phase map for free. The approach has only a weak T₁ and T₂ dependence and moreover, causes only a low specific absorption rate (SAR) burden. The accuracy of the method with respect to systematic and statistical errors is investigated both, theoretically and in experiments on phantoms. In addition, the performance of the approach is demonstrated in vivo in B₁‐mapping and radiofrequency shimming experiments on the abdomen, the legs, and the head on an eight‐channel parallel transmit 3 T MRI system. Magn Reson Med, 2012. © 2012 Wiley Periodicals, Inc.     

High‐resolution 3D radial bSSFP with IDEAL

Radial trajectories facilitate high‐resolution balanced steady state free precession (bSSFP) because the efficient gradients provide more time to extend the trajectory in k‐space. A number of radial bSSFP methods that support fat–water separation have been developed; however, most of these methods require an environment with limited B₀ inhomogeneity. In this work, high‐resolution bSSFP with fat–water separation is achieved in more challenging B₀ environments by combining a 3D radial trajectory with the IDEAL chemical species separation method. A method to maintain very high resolution within the timing constraints of bSSFP and IDEAL is described using a dual‐pass pulse sequence. The sampling of a unique set of radial lines at each echo time is investigated as a means to circumvent the longer scan time that IDEAL incurs as a multiecho acquisition. The manifestation of undersampling artifacts in this trajectory and their effect on chemical species separation are investigated in comparison to the case in which each echo samples the same set of radial lines. This new bSSFP method achieves 0.63 mm isotropic resolution in a 5‐min scan and is demonstrated in difficult in vivo imaging environments, including the breast and a knee with ACL reconstruction hardware at 1.5 T. Magn Reson Med 71:95–104, 2014. © 2013 Wiley Periodicals, Inc.     

Accelerating three‐dimensional molecular cardiovascular MR imaging using compressed sensing

Purpose:

To accelerate the acquisition of three‐dimensional (3D) high‐resolution cardiovascular molecular MRI by using Compressed Sensing (CS) reconstruction.

Materials and Methods:

Molecular MRI is an emerging technique for the early assessment of cardiovascular disease. This technique provides excellent soft tissue differentiation at a molecular and cellular level using target‐specific contrast agents (CAs). However, long scan times are required for 3D molecular MRI. Parallel imaging can be used to speed‐up these acquisitions, but hardware considerations limit the maximum acceleration factor. This limitation is important in small‐animal studies, where single‐coils are commonly used. Here we exploit the sparse nature of molecular MR images, which are characterized by localized and high‐contrast biological target‐enhancement, to accelerate data acquisition. CS was applied to detect: (a) venous thromboembolism and (b) coronary injury and aortic vessel wall in single‐ and multiple‐coils acquisitions, respectively.

Results:

Retrospective undersampling showed good overall image quality with accelerations up to four for thrombus and aortic images, and up to three for coronary artery images. For higher acceleration factors, features with high CA uptake were still well recovered while low affinity targets were less preserved with increased CS undersampling artifacts. Prospective undersampling was performed in an aortic image with acceleration of two, showing good contrast and well‐defined tissue boundaries in the contrast‐enhanced regions.

Conclusion:

We demonstrate the successful application of CS to preclinical molecular MR with target specific gadolinium‐based CAs using retrospective (accelerations up to four) and prospective (acceleration of two) undersampling. J. Magn. Reson. Imaging 2012; 36:1362–1371. © 2012 Wiley Periodicals, Inc.