The modification of chlorinated poly(propylene) (CPP) via graft copolymerization of EHA using ATRgP is reported. The kinetic plot of monomer conversion versus reaction time was found to be linear, which is the typical characteristic of a living controlled polymerization. The grafted copolymers were characterized by means of FT‐IR and 1H NMR spectroscopy, GPC, DSC, and TGA. Mechanical properties were also studied by means of UTM and DMA. The stress/strain plot and the tension set properties indicate that the brush‐type graft copolymer (CPP‐g‐PEHA) behaves as a thermoplastic elastomer.
A polystyrene‐block‐poly(ferrocenylethylmethylsilane) diblock copolymer, displaying a double‐gyroid morphology when self‐assembled in the solid state, has been prepared with a PFEMS volume fraction ?PFEMS = 0.39 and a total molecular weight of 64 000 Da by sequential living anionic polymerisation. A block copolymer with a metal‐containing block with iron and silicon in the main chain was selected due to its plasma etch resistance compared to the organic block. Self‐assembly of the diblock copolymer in the bulk showed a stable, double‐gyroid morphology as characterised by TEM. SAXS confirmed that the structure belonged to the Iad space group.
A series of well‐defined miktocycle number‐eight‐shaped copolymers composed of cyclic polystyrene (PS) and cyclic poly(ε‐caprolactone) (PCL) have been successfully synthesized by a combination of atom transfer radical polymerization (ATRP), ring‐opening polymerization (ROP), and “click” reaction. The synthesis involves three steps: 1) preparation of tetrafunctional initiator with two acetylene groups, one hydroxyl group and a bromo group; 2) preparation of two azide‐terminated block copolymers, N3‐PCL‐(CH?C)2‐PS‐N3, with two acetylene groups anchored at the junction; and 3) intramolecular cyclization of the block copolymer through “click” reaction under high dilution. The 1H NMR, FT‐IR, and gel permeation chromatography (GPC) techniques are applied to characterize the chemical structures of the resulting intermediates and the target polymers. Their thermal behavior is investigated by differential scanning calorimeter (DSC). The decrease in chain mobility of eight‐shaped copolymers restricts the crystallization of PCL.
Summary: The complex dynamics of poly(n‐alkyl methacrylates) is studied by advanced 13C NMR spectroscopy as well as mechanical and dielectric relaxation. Extended backbone conformations are identified as the molecular units involved in structural relaxation. From the variation in the degree of polymerization and a comparison with the presence of stereoregular sequences in the sample, the length of the extended units is determined to involve about five, at most ten monomeric units. Syndiotactic and isotactic sequences behave similarly. These findings are indicative of locally structured polymer melts.
Summary: A pyrene end‐labeled amphiphilic block copolymer, poly(ε‐caprolactone)‐block‐poly[6‐O‐(4‐vinylbenzyl)‐D ‐galactose] (Py‐PCL‐b‐PVBG), was synthesized by a four‐step method. The aggregation behavior of the diblock copolymer in solution was studied by monitoring the fluorescence of pyrene. TEM measurements revealed that the aggregates obtained by first dissolving the copolymer in N,N‐dimethylformamide (DMF), followed by the addition of water, were primarily spheres with the PCL blocks in the core. The PVBG corona was then crosslinked with glutaraldehyde. Final removal of the PCL core was accomplished by degradation under basic conditions, which resulted in the formation of hollow glycopolymer nanospheres.
Structure of poly(ε‐caprolactone)‐block‐poly[6‐O‐(4‐vinylbenzyl)‐D ‐galactose]. 相似文献
A novel stereo‐regular organo‐bridged ladder‐like polymethylsiloxane ( LPMS ) was synthesized by a stepwise coupling polymerization on the basis of an amido H‐bonding‐assisted self‐assembling template. The monomer N,N′‐bis{4‐[3‐(diethoxymethylsilyl)propoxy]‐phenyl}terephthalamide ( M ), prepared by hydrosilylation reaction at high temperature, was hydrolyzed in a dilute solution at a low temperature to form a ladder‐like supramolecular intermediate through amido H‐bonding interactions, which was further condensed to form the polymer LPMS . A combination of techniques including 1H NMR, 29Si NMR, and FT‐IR spectroscopies X‐ray diffraction (XRD), and differential scanning calorimetry (DSC) were used to characterize the titled polymer LPMS , and the results indicate that the polymer possesses an ordered ladder‐like structure.
A one‐pot solution polymerization under mild conditions was adapted for the synthesis of well‐defined aliphatic‐aromatic polyesters with different degrees of branching. The esterification was performed at room temperature using 4,4‐bis(4′‐hydroxyphenyl)valeric acid (AB2) and 3‐(4‐hydroxyphenyl)propionic acid (AB) as monomers. DPTS was used as a catalyst and DCC as a coupling agent. Polyesters with statistical, dendritic topology, controlled degree of branching and > 35 000 g · mol?1 were obtained. The polymers were characterized by 1H and 13C NMR, SEC, DSC, and TGA. A strong dependence of the degree of branching and the thermal properties of the polymers depending on the AB/AB2 monomer ratio was observed.
Poly(3‐hexylthiophene)‐block‐poly(2‐ethyl‐2‐oxazoline) amphiphilic rod–coil diblock copolymers have been synthesized by a combination of Grignard metathesis (GRIM) and ring‐opening cationic polymerization. Diblock copolymers containing 5, 15, and 30 mol‐% poly(2‐ethyl‐2‐oxazoline) have been synthesized and characterized. The synthesized rod–coil block copolymers display nanofibrillar morphology where the density of the nanofibrills is dependent on the concentration of the poly(2‐ethyl‐2‐oxazoline) coil segment. The conductivity of the diblock copolymers was lowered from 200 to 35 S · cm?1 with an increase in the content of the insulating poly(2‐ethyl‐2‐oxazoline) block. By contrast, the field‐effect mobility decreased by 2–3 orders of magnitude upon the incorporation of the poly(2‐ethyl‐2‐oxazoline) insulating segment.
Block copolymers of polystyrene and poly(tert‐butyl methyacrylate) were prepared by ATRP. Halogen atoms at the chain ends were transformed into azide groups to obtain N3 terminated block copolymers, which were connected to the surface of multi‐walled carbon nanotubes (MWNTs) by reacting N3 with MWNT's surface. Amphiphilic diblock copolymer modified MWNTs were obtained after PtBMA blocks were hydrolyzed to polymethyacrylic acid (PMAA). Results showed that the amphiphilic diblock copolymer was grafted onto MWNTs by covalent bonds. TEM showed that they formed self‐assembly structures by hydrophilic/hydrophobic interaction in good solvents. As the block length of PMAA increased, the self‐assembly structures of amphiphilic MWNTs became increasingly ordered and uniform.
Pyrene containing diblock copolymers based on poly(methyl methacrylate) were synthesized and investigated regarding their adsorption on carbon nanotubes (CNT). The pyrene units were introduced using a reactive ester monomer for the build up of the second block which later on was reacted polymer‐analogously with amine functionalized pyrene derivatives. As we started from the same reactive ester intermediate, full block length identity is given. We varied the length of the anchor block to find an optimal block length and used pyren‐1‐yl‐methylamine as well as 4‐pyren‐1‐yl‐butylamine as anchor units. For both anchor units a maximal adsorption was found for 13 and 20 anchor units, respectively. The absolute adsorption was best for the 4‐pyren‐1‐yl‐butylamine anchor units as the longer spacer enhances the mobility of the anchor unit. The dispersion diagram of CNTs and diblock copolymer in terms of dispersion stability was investigated and a stable dispersion of 2.5 mg · ml?1 CNTs in THF was found.
CROP has been used to synthesize well‐defined POXZ with a monofunctional (iodomethane) or a bifunctional (1,3‐diiodopropane) initiator. POXZ has been functionalized with an azido group at one (α‐azido‐POXZ, = 3.58 × 103 g · mol?1) or both ends (α,ω‐azido‐POXZ, = 6.21 × 103 g · mol?1) of the macromolecular chain. The Huisgen 1,3‐dipolar cycloaddition has been investigated between azido‐POXZ and a terminal alkyne on a small or larger molecule (PEG). In each case, the click reaction has been successful and quantitative. In this way, different telechelic polymers (polymers bearing different functions such as acrylate, epoxide, or carboxylic acid) and block copolymers of POXZ and PEG have been prepared. The polymers have been characterized by means of FTIR, 1H NMR, and SEC.
A series of poly(vinylcarbazole‐ran‐styrene) copolymers with terminal hydroxyl groups were synthesized using nitroxide mediated polymerization (NMP) with the hydroxyl‐functional initiator VA‐086 and TEMPO as the mediator at 130 °C. Polymerizations were studied as a function of vinylcarbazole feed content, target molecular weight, and VA‐086/TEMPO ratio. The characterization of the copolymers was done by GPC and NMR. For feed concentrations of 40 mol‐% vinylcarbazole, copolymers with vinylcarbazole concentration up to 33 mol‐% could be obtained with narrow molecular weight distributions (PDI = 1.35) and exhibit pseudo‐“living” character up to conversions of about 20% if the target molecular weight was >100 kg · mol?1. 1H NMR indicated that the hydroxyl group was retained sufficiently with a functionality typically of about 0.7 hydroxyl groups per chain. Copolymers synthesized with higher vinylcarbazole feed content exhibited slower kinetics and were less controlled, resulting in much broader molecular weight distributions. The absence of control could be attributed to the absence of thermal initiation by vinylcarbazole which is advantageous toward controlling the radical concentration during the polymerization.
Summary: A dipolar filter pulse sequence combined with cross‐polarization‐MAS is applied to characterize the phase distribution, morphology, and spin diffusion within a high‐density polyethylene sample. A new method to obtain quantitative 13C NMR by combining cross‐polarization‐MAS and spin diffusion NMR is presented. The derived crystallinity is consistent with the corresponding crystallinity obtained by 1H NMR.
Illustration of the pulse sequence(s) applied in the present work. 相似文献
A series of ethylene and acrylonitrile composite elastomers were prepared using (1,4‐bis(2,6diisopropylphenyl)‐acenaphtenediimine‐nickel(II))‐dichloride/ethylaluminum sesquichloride (EASC). The xylene‐soluble polymer fraction showed nitrile bands in infrared spectroscopy at 2 245 and 2 214 cm?1 and polyacrylonitrile‐enriched structures were detected in the xylene‐insoluble fraction by1H and 13C NMR. In addition, TEM detected nanosized polyacrylonitrile domains dispersed in the polyethylene matrix. Differential scanning calorimetry scans conducted from ?70 to 350 °C measured exothermic bands corresponding to the cyclization and aromatization of the nitrile groups dispersed in the polyethylene matrix.
Summary: A new principle for the design of dendritic macromolecules – the ionic binding of linear chain polyelectrolyte with oppositely charged focal ionogenic groups of dendrons – has been developed. The majority of the dendritic ionic complexes (DICs) are prepared with poly(styrenesulfonic acid) (PSS) as a polymeric core and L ‐aspartic acid dendrons of different generations. Two series of DICs were prepared using PSS and aspartic dendrons bearing terminal (located at the external periphery) methoxycarbonyl and hexyloxycarbonyl groups (C1‐n and C6‐n respectively where n is the generation number). Ionic binding of about 100% was found for dendrons of Generation 1–3. The solubility of the DICs was examined and the DICs prepared were studied by IR spectroscopy, 1H NMR and viscometry.
Dendritic ionic complexes prepared using poly(styrenesulfonic acid) acid and aspartic dendrons bearing terminal methoxycarbonyl and hexyloxycarbonyl groups. 相似文献
For number‐average molecular weight (Mn) below 1 × 104 g mol?1, the comparison of cold crystallization temperature and spherulite growth rate and crystallinity of linear 1‐arm, 2‐arm, and branched 4‐arm poly(L ‐lactide)/poly(D ‐lactide) blends exhibits that the effects of chain directional change and branching significantly disturb stereocomplex crystallization. In contrast, the comparison of glass transition and melting temperatures of linear 1‐arm, 2‐arm, and branched 4‐arm poly(L ‐lactide)/poly(D ‐lactide) blends indicates that the effects of chain directional change and branching insignificantly alter and largely increase the segmental mobility of the blends, respectively, and the crystalline thickness of the blends is determined by Mn per one arm not by Mn and is not affected by the molecular architecture.
A modular synthesis of short chain length and medium chain length poly(3‐hydroxyalkanoate)s‐b‐poly(ethylene glycol) (PHAs‐b‐PEG) diblock copolymers is described. First, length‐controlled oligomers of hydrophobic poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBHV), poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (PHBHHx), and poly(3‐hydroxyoctanoate‐co‐hydroxyhexanoate) (PHOHHx) containing a carboxylic acid end group were obtained by thermal treatment, with molar masses ranging from 3 800 to 15 000 g · mol?1. After quantitative functionalization with propargylamine, ligation with azide‐terminated poly(ethylene glycol) of 5 000 g · mol?1 was accomplished using the copper (I) catalyzed azide alkyne cycloaddition (CuAAC). Well‐defined diblock copolymers were obtained up to 93% yield, with molar masses ranging from 9 900 to 23 100 g · mol?1. All products were fully characterized using 1H NMR, COSY, SEC, TGA, and DSC.
Summary: The crystallization behavior of crystalline‐crystalline diblock copolymer containing poly(ethylene oxide) (PEO) and poly(ε‐caprolactone) (PCL), in which the weight fraction of PCL is 0.815, has been studied via differential scanning calorimeter (DSC), wide‐angle X‐ray diffraction (WAXD), and polarized optical microscopy (POM). DSC and WAXD indicated that both PEO and PCL blocks crystallize in the block copolymer. POM revealed a ring‐banded spherulite morphology for the PEO‐b‐PCL diblock copolymer.
DSC heating curve for the PEO‐b‐PCL block copolymer. 相似文献
Solid mesoionic 2‐[2‐(isopropenylcarbonyloxy)ethylthio]‐1‐methyl‐6‐oxo‐3‐phenyl‐5‐propyl‐1,6‐dihydropyrimidin‐3‐ium‐4‐olate was complexed in water using β‐cyclodextrin (β‐CD) and randomly methylated β‐CD, which resulted in polymerizable complexes with 2:1 stoichiometry. The β‐CD complex was characterized using 1H NMR, ROESY NMR and UV spectroscopy. Polymerization of the complex prepared from methylated β‐CD led to a photosensitive polymer, which precipitated during polymerization and was nearly free of CD. Polymerization was carried out with a water‐soluble redox initiator. In addition, a copolymer with methyl methacrylate was prepared from the complexes, which showed a different mass‐dependent distribution in the incorporation in comparison to a copolymer prepared without CD in organic solvents.
New polyhydrazides and poly(amidehydrazide)s bearing redox‐active carbazole and triphenylamine units were prepared. The resulting poly(1,3,4‐oxdiazole)s and poly(amide‐1,3,4‐oxadiazole)s had high glass‐transition temperatures (288–330 °C) and high thermal stability. The dilute solutions of all the hydrazide and oxadiazole polymers showed a weak–medium photoluminescence with emission maxima around 474–506 nm. The polymer films revealed two well‐defined and reversible redox couples upon electrochemical oxidation, together with interesting electrochromic behaviors. They showed enhanced redox‐stability and electrochromic performance. CV of the oxadiazole polymers also showed reduction processes due to the formation of radical anions of the oxadiazole units.
