Fully automated synthesis and purification of 4‐(2′‐methoxyphenyl)‐1‐[2′‐(N‐2″‐pyridinyl)‐p‐[18F]fluorobenzamido]ethylpiperazine

We have developed an efficient synthesis method for the rapid and high‐yield automated synthesis of 4‐(2′‐methoxyphenyl)‐1‐[2′‐(N‐2″‐pyridinyl)‐p‐[¹⁸F]fluorobenzamido]ethylpiperazine (p‐[¹⁸F]MPPF). No‐carrier‐added [¹⁸F]F^? was trapped on a small QMA cartridge and eluted with 70% MeCN(aq) (0.4 mL) containing Kryptofix 222 (2.3 mg) and K₂CO₃ (0.7 mg). The nucleophilic [¹⁸F]fluorination was performed with 3 mg of the nitro‐precursor in DMSO (0.4 mL) at 190 °C for 20 min, followed by the preparative HPLC purification (column: COSMOSIL Cholester, Nacalai Tesque, Kyoto, Japan; mobile phase: MeCN/25 mm AcONH₄/AcOH = 200/300/0.15; flow rate: 6.0 mL/min) to afford p‐[¹⁸F]MPPF (retention time = 9.5 min). p‐[¹⁸F]MPPF was obtained automatically with a radiochemical yield of 38.6 ± 5.0% (decay corrected, n = 5), a specific activity of 214.3 ± 21.1 GBq/µmol, and a radiochemical purity of >99% within a total synthesis time of about 55 min. Copyright © 2012 John Wiley & Sons, Ltd.     

A first synthesis of 18F‐radiolabeled lapatinib: a potential tracer for positron emission tomographic imaging of ErbB1/ErbB2 tyrosine kinase activity

Fluorine‐18‐labeled lapatinib has been successfully synthesized for the first time by the reaction of a dimethylformamide solution of meta‐[¹⁸F]fluorobenzylbromide with a Boc‐protected lapatinib precursor fragment. The reaction proceeded in the presence of K₂CO₃ at 110 °C for 10 min in a microwave and was followed by Boc‐group deprotection with trifluoroacetic acid. The overall radiochemical yield of the reaction starting from the radiofluorination of the iodonium salt was 8–12% (uncorrected, n = 6) in a 140‐min synthesis time.     

A novel method for stereospecific fluorination at the 2′‐arabino‐position of pyrimidine nucleoside: synthesis of [18F]‐FMAU

Direct fluorination of a pyrimidine nucleoside at the 2′‐arabino‐position has been deemed to be extremely difficult, if not impossible. The conventional synthesis of 2′‐deoxy‐2′‐fluoro‐5‐methy‐1‐β‐D ‐arabinofuranosyluracil (FMAU) and its 5‐substituted analogs involves stereospecific fluorination of the 1,3,5‐tri‐O‐benzoyl‐α‐D ‐ribofuranose‐2‐sulfonate ester followed by bromination at the C₁‐postion, and then coupling with pyrimidine‐bis‐trimethylsilyl ether. Several radiolabeled nucleoside analogs, including [¹⁸F]FMAU, and other 5‐substituted analogs, were developed according to this methodology. However, routine production of these compounds using this multi‐step process is inconvenient and limits their clinical application. We developed a novel precursor and method for direct fluorination of preformed nucleoside analogs at the 2′‐arabino position, exemplified via radiosynthesis of [¹⁸F]FMAU. The 2′‐methylsulfonyl‐3′,5′‐O‐tetrahydropyranyl‐N³‐Boc‐5‐methyl‐1‐β‐D ‐ribofuranosiluracil was synthesized in multiple steps. Radiofluorination of this precursor with K¹⁸F/kryptofix produced 2′‐deoxy‐2′‐[¹⁸F]fluoro‐3′,5′‐O‐tetrahydropyranyl‐N³‐Boc‐5‐methyl‐1‐β‐D ‐arabinofuranosiluracil. Acid hydrolysis followed by high‐performance liquid chromatography purification produced the desired [¹⁸F]FMAU. The average radiochemical yield was 2.0% (decay corrected, n=6), from the end of bombardment. Radiochemical purity was >99%, and specific activity was >1800 mCi/µmol. Synthesis time was 95–100 min from the end of bombardment. This direct fluorination is a novel method for synthesis of [¹⁸F]FMAU, and the method should be suitable for production of other 5‐substituted pyrimidine analogs, including [¹⁸F]FEAU, [¹⁸F]FIAU, [¹⁸F]FFAU, [¹⁸F]FCAU, and [¹⁸F]FBAU. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of 3′‐deoxy‐3′‐[18F]fluoro‐1‐β‐D‐xylofuranosyluracil ([18F]‐FMXU) for PET

The synthesis of a pyrimidine analog, 3′‐deoxy‐3′‐[¹⁸F]‐fluoro‐1‐β‐D ‐xylofuranosyluracil ([¹⁸F]‐FMXU) is reported. 5‐Methyluridine 1 was converted to its di‐methoxytrityl derivatives 2 and 3 as a mixture. After separation the 2′,5′‐di‐methoxytrityluridine 2 was converted to its 3′‐triflate 4 followed by derivatization to the respective N³‐t‐Boc product 5 . The triflate 5 was reacted with tetrabutylammonium[¹⁸F]fluoride to produce 6 , which by acid hydrolysis yielded compound 7 . The crude preparation was purified by HPLC to obtain the desired product [¹⁸F]‐FMXU. The radiochemical yields were 25–40% decay corrected (d. c.) with an average of 33% in four runs. Radiochemical purity was >99% and specific activity was >74 GBq/µmol at the end of synthesis (EOS). The synthesis time was 67–75 min from the end of bombardment (EOB). Copyright © 2005 John Wiley & Sons, Ltd.     

Radiosynthesis of 2‐exo‐(2′‐[18F]Fluoro‐3′‐(4‐fluorophenyl)‐pyridin‐5′‐yl)‐7‐azabicyclo[2.2.1]heptane ([18F]F2PhEP), a potent epibatidine‐based radioligand for nicotinic acetylcholine receptor PET imaging

2‐exo‐(2′‐Fluoro‐3′‐(4‐fluorophenyl)‐pyridin‐5′‐yl)‐7‐azabicyclo[2.2.1]heptane (F₂PhEP), a novel, epibatidine‐based, α4β2‐selective nicotinic acetylcholine receptor antagonist of low toxicity, as well as the corresponding N‐Boc‐protected chloro‐ and bromo derivatives as precursors for labelling with fluorine‐18 were synthesized from 7‐tert‐butoxycarbonyl‐7‐azabicyclo[2.2.1]hept‐2‐ene in 13, 19 and 8% overall yield, respectively. [¹⁸F]F₂PhEP was prepared in 8–9% overall yield (non‐decay‐corrected) using 1 mg of the bromo derivative in the following two‐step radiochemical process: (1) no‐carrier‐added nucleophilic heteroaromatic ortho‐radiofluorination with the activated K[¹⁸F]F‐Kryptofix^®₂₂₂ complex in DMSO using microwave activation at 250 W for 90 s, followed by (2) quantitative TFA‐induced removal of the N‐Boc protective group. Radiochemically pure (>95%) [¹⁸F]F₂PhEP (1.48–1.66 GBq, 74–148 GBq/µmol) was obtained after semi‐preparative HPLC (Symmetry^® C18, eluent aqueous 0.05 M NaH₂PO₄ CH₃CN: 78/22 (v:v)) in 75–80 min starting from an 18.5 GBq aliquot of a cyclotron‐produced [¹⁸F]fluoride production batch. Copyright © 2006 John Wiley & Sons, Ltd.     

A simplified radiosynthesis of [18F]MK‐6240 for tau PET imaging

[¹⁸F]MK‐6240 (6‐(fluoro)‐3‐(1H‐pyrrolo[2,3‐c]pyridin‐1‐yl)isoquinolin‐5‐amine) is a highly selective PET radiotracer for the in vivo imaging of neurofibrillary tangles (NFTs). [¹⁸F]MK‐6240 was synthesized in one step from its bis‐Boc protected precursor N‐[(tert‐butoxy)carbonyl]‐N‐(6‐nitro‐3‐[1H‐pyrrolo[2,3‐c]pyridin‐1‐yl]isoquinolin‐5‐yl) carbamate in DMSO using [¹⁸F] fluoride with TEA HCO₃ with step‐wise heating up to 150°C, resulting in an isolated radiochemical yield of 9.8% ± 1.8% (n = 3) calculated from the end of bombardment (5.2% ± 1.0% calculated from the end of synthesis). This new synthetic approach eliminates the acidic deprotection of the bis‐Boc ¹⁸F‐labeled intermediate, which reduces the number of operations necessary for the synthesis as well as losses, which occur during deprotection and neutralization of the crude product mixture prior to the HPLC purification. The synthesis was performed automatically with a single‐use cassette on an IBA Synthera+ synthesis module. This synthesis method affords the radioligand with a reliable radiochemical yield, high radiochemical purity, and a high molar activity. [¹⁸F]MK‐6240 synthesized with this method has been regularly (n > 60) used in our ongoing human and animal PET imaging studies.     

N3‐Substituted thymidine analogues III: radiosynthesis of N3‐[(4‐[18F]fluoromethyl‐phenyl)butyl]thymidine ([18F]‐FMPBT) and N3‐[(4‐[18F]fluoromethyl‐phenyl)pentyl] thymidine ([18F]‐FMPPT) for PET

Radiosyntheses of two N³‐substituted thymidine analogues, N³‐[(4[¹⁸F]fluoromethyl‐phenyl)butyl]thymidine ([¹⁸F]‐FMPBT) and N³‐[(4[¹⁸F]fluoromethyl‐phenyl)pentyl]thymidine ([¹⁸F]‐FMPPT), are reported. The precursor compounds 9 and 10 were synthesized in six steps and the standard compounds 13 and 14 were synthesized from these precursors. For radiosynthesis, compounds 9 and 10 were fluorinated with n‐Bu₄N[¹⁸F] to produce [¹⁸F]‐ 11 and [¹⁸F]‐ 12 , which by acid hydrolysis yielded [¹⁸F]‐ 13 and [¹⁸F]‐ 14 , respectively. The crude products were purified by high‐performance liquid chromatography to obtain [¹⁸F]‐FMPBT and [¹⁸F]‐FMPPT. The average decay‐corrected radiochemical yield for [¹⁸F]‐ 13 was 15% in five runs, and that for [¹⁸F]‐ 14 was 10% in four runs. The radiochemical purity was >99% and the specific activity was >74 GBq/µmol at the end of synthesis. The synthesis time was 80–90 min from the end of bombardment. Copyright © 2007 John Wiley & Sons, Ltd.     

Automated commercial synthesis system for preparation of O‐(2‐[18F]fluoroethyl)‐L‐tyrosine by direct nucleophilic displacement on a resin column

A slightly modified automated commercial synthesis system for preparation of O‐(2‐[¹⁸F]fluoroethyl)‐l‐tyrosine (FET), an amino acid tracer for tumor imaging with positron emission tomography, is described. Direct nucleophilic fluorination of [¹⁸F]fluoride with 1,2‐di(4‐methylphenylsulfonyloxy)ethane on a quaternary 4‐(4‐methylpiperidinyl)‐pyridinium functionalized polystyrene anion exchange resin gave 1‐[¹⁸F]‐2‐(4‐methylphenylsulfonyloxy)ethane, then [¹⁸F]fluoroalkylation of l‐tyrosine yielded FET. The overall radiochemical yield with no decay correction was about 8–10%, the whole synthesis time was about 52 min, and the radiochemical purity was above 95%. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis and bioevaluation of 4‐chloro‐2‐tert‐butyl‐5‐[2‐[[1‐[2‐[18F]fluroethyl]‐1H‐1,2,3‐triazol‐4‐yl]methyl]phenylmethoxy]‐3(2H)‐pyridazinone as potential myocardial perfusion imaging agent with PET

This study reports the synthesis and characterization of 4‐chloro‐2‐tert‐butyl‐5‐[2‐[[1‐[2‐[¹⁸F]fluroethyl]‐1H‐1,2,3‐triazol‐4‐yl]methyl]phenylmethoxy]‐3(2H)‐pyridazinone ([¹⁸F]Fmp2) for myocardial perfusion imaging (MPI). The tosylate precursor and non‐radioactive compound [¹⁹F]Fmp2 were synthesized and characterized by infrared, ¹H‐NMR, ¹³C‐NMR, and mass spectra (MS). The radiotracer [¹⁸F]Fmp2 was obtained by one‐step nucleophilic substitution of tosyl with ¹⁸F, and evaluated as an MPI agent in vitro and in vivo. Starting from [¹⁸F]KF/K₂₂₂ solution, the typical decay‐corrected radiochemical yield (RCY) was 38 ± 8.8% with high radiochemical purity (>98%). The specific activity was calculated as 10 GBq/µmol at the end of synthesis determined by HPLC analysis. In the mice biodistribution, [¹⁸F]Fmp2 showed very high initial heart uptake (53.35 ± 5.47 %ID/g at 2 min after injection) and remarkable retention. The heart/liver, heart/lung, and heart/blood ratios were 7.98, 8.20, and 53.13, respectively at 2 min post‐injection. In the Positron Emission Tomography (PET) imaging study of Chinese mini‐swine, the standardized uptake value of the liver decreased modestly during the 2 h post‐injection, while the heart uptake and heart/liver ratios continued to increase with time. [¹⁸F]Fmp2 exhibited good stability, high heart uptake and low lung uptake in mice and Chinese mini‐swine. It may be worthy of further modification to improve liver clearance for MPI in the future.     

Preparation of fluorine‐18‐labelled fluoromisonidazole using two different synthesis methods

¹⁸F‐labelled fluoromisonidazole [1H‐1‐(3‐[¹⁸F]fluoro‐2‐hydroxypropyl)‐2‐nitroimida‐zole; ([¹⁸F]FMISO)] is used as an in vivo marker of hypoxic cells in tumours and ischaemic areas of the heart and the brain. The compound plays an important role in evaluating the oxygenation status in tumours during radiotherapy. In this paper, we report experiments carried out in our laboratory in synthesizing [¹⁸F]FMISO using two different methods. The first method (I) for the [¹⁸F]FMISO synthesis was the fluorination of (2R)‐(?)‐glycidyl tosylate to [¹⁸F]epifluorohydrin. The subsequent nucleophilic ring opening, achieved with 2‐nitroimidazole, leads to labelled FMISO. The second method (II) was the fluorination of the protected precursor 1‐(2′‐nitro‐1′‐imidazolyl)‐2‐O‐tetrahydropyranyl‐3‐O‐toluenesulphonyl‐propanediol, followed by a rapid removal of the protecting group. With the first method, the radiochemical yield was about 10% at the end of the synthesis (EOS), and the radiochemical purity was over 99%. The radiochemical yield in the second method was 21% (EOS) on an average, and the radiochemical purity was over 97%. When an automated commercial synthesis module was used with method II, slightly better and more reproducible yields were achieved. The improvement in the synthesis yield with the automated apparatus will be valuable when working with high activities, and therefore it is under further development. Copyright © 2003 John Wiley & Sons, Ltd.     

Radiosynthesis of N5‐[18F]fluoroacetylornithine (N5‐[18F]FAO) for PET imaging of ornithine decarboxylase (ODC) in malignant tumors

Polyamines are naturally occurring polycations derived from amino acids via decarboxylation by ornithine decarboxylase (ODC). Ornithine is a substrate for ODC; decarboxylation of ornithine is inhibited by difluoromethylornithine (DFMO) and its derivatives. Polyamine contents are increased in many epithelial cancers, including breast cancer, melanoma, and prostate cancer. In order to image and measure the levels of ODC expression in malignant tumors, we have synthesized a derivative of ornithine, N⁵‐[¹⁸F]fluoroacetylornithine (N⁵‐[¹⁸F]FAO), for use in positron emission tomography. The precursor compound N²‐Boc‐N⁵‐bromoacetylornithine‐t‐butyl ester 2 was synthesized from 5‐amino‐2‐(tert‐butoxycarbonylamino)pentanoic acid, which was reacted with bromoacetyl chloride followed by esterification with tert‐butyl‐2,2,2‐trichloroacetamidate. Fluorination of the precursor produced a fluoro‐derivative, which was hydrolyzed in acid to obtain the desired compound, N⁵‐fluoroacetylornithine. The radiosynthesis of N⁵‐[¹⁸F]FAO was accomplished by radiofluorination of 2 with n‐Bu₄N[¹⁸F], followed by high‐performance liquid chromatography (HPLC) purification and then by acid hydrolysis. The radiochemical yield was 6–10% (decay corrected) with an average of 8% (n=10) at the end of synthesis. The radiochemical purity was >99%, and specific activity was >1500 mCi/µmol. The synthesis time was 95–100 min from the end of bombardment. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation of 3′‐deoxy‐3′‐[18F]fluorothymidine ([18F]FLT) in ionic liquid, [bmim][OTf]

Although 3′‐deoxy‐3′‐[¹⁸F]fluorothymidine ([¹⁸F]FLT) is a prospective radiopharmaceutical for the imaging of proliferating tumor cell, it is difficult to prepare large amount of [¹⁸F]FLT. We herein describe the preparation of [¹⁸F]FLT in an ionic liquid, [bmim][OTf] (1‐butyl‐3‐methyl‐imidazolium trifluoromethanesulfonate). At optimized condition, [¹⁸F]fluorinationin ionic liquid with 5 µl of 1 M KHCO₃ and 5 mg of the precursor yielded 61.5 ± 4.3% (n=10). Total elapsed time was about 70 min including HPLC purification. The rapid synthesis of [¹⁸F]FLT can be achieved by removing all evaporation steps. Overall radiochemical yield and radiochemical purity were 30 ± 5% and >95%, respectively. This method can use a small amount of a nitrobenzenesulfonate precursor and can be adapted for automated production. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of 2‐[(4‐[18F]Fluorobenzoyloxy)methyl]‐1,4‐naphthalenedione from 2‐hydroxymethyl 1,4‐naphthoquinone and 4‐[18F]fluorobenzoic acid using dicyclohexyl carbodiimide

2‐[(4‐[¹⁸F]Fluorobenzoyloxy)methyl]‐1,4‐naphthalenedione ([¹⁸F]7 ) and 4‐[¹⁸F]fluorobenzoic acid ([¹⁸F]8 . This coupling reaction was fast and gave quantitative yields. Further investigations are warranted on the use of DCC as a coupling agent in Positron Emission Tomography. The synthesis including HPLC purification and reformulation has been fully automated on a modified FDG synthesiser with two reactor vials. [¹⁸F]1 was found to be stable in plasma and saline, but underwent rapid metabolism in a phase 1 metabolite assay using rat S9 liver fractions. An in vivo evaluation of [¹⁸F]相似文献   

A facile automated synthesis of N‐succinimidyl 4‐[18F]fluorobenzoate ([18F]SFB) for 18F‐labeled cell‐penetrating peptide as PET tracer

A fully automated synthesis of N‐succinimidyl 4‐[¹⁸F]fluorobenzoate ([¹⁸F]SFB) was carried out by a convenient three‐step, one‐pot procedure on the modified TRACERlab FX_FN synthesizer, including [¹⁸F]fluorination of ethyl 4‐(trimethylammonium triflate)benzoate as the precursor, saponification of the ethyl 4‐[¹⁸F]fluorobenzoate with aqueous tetrapropylammonium hydroxide instead of sodium hydroxide, and conversion of 4‐[¹⁸F]fluorobenzoate salt ([¹⁸F]FBA) to [¹⁸F]SFB treated with N,N,N′,N′‐tetramethyl‐O‐(N‐succinimidyl)uranium tetrafluoroborate (TSTU). The purified [¹⁸F]SFB was used for the labeling of Tat membrane‐penetrating peptide (containing the Arg‐Lys‐Lys‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Pro‐Leu‐Gly‐Leu‐Ala‐Gly‐Glu‐Glu‐Glu‐Glu‐Glu‐Glu‐Glu sequence, [¹⁸F]CPP) through radiofluorination of lysine amino groups. The uncorrected radiochemical yields of [¹⁸F]SFB were as high as 25–35% (based on [¹⁸F]fluoride) (n=10) with a synthesis time of～40 min. [¹⁸F]CPP was produced in an uncorrected radiochemical yields of 10–20% (n=5) within 30 min (based on [¹⁸F]SFB). The radiochemical purities of [¹⁸F]SFB and [¹⁸F]CPP were greater than 95%. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of [18F] 4‐amino‐N‐(3‐chloro‐4‐fluorophenyl)‐N′‐hydroxy‐1,2,5‐oxadiazole‐3‐carboximidamide (IDO5L): a novel potential PET probe for imaging of IDO1 expression

To synthesize ¹⁸F‐labeled positron emission tomography (PET) ligands, reliable labeling techniques inserting ¹⁸F into a target molecule are necessary. The ¹⁸F‐fluorobenzene moiety has been widely utilized in the synthesis of ¹⁸F‐labeled compounds. The present study utilized [¹⁸F]‐labeled aniline as intermediate in [¹⁸F]‐radiolabeling chemistry for the facile radiosynthesis of 4‐amino‐N‐(3‐chloro‐4‐fluorophenyl)‐N′‐hydroxy‐1,2,5‐oxadiazole‐3‐carboximidamide ([¹⁸F]IDO5L) as indoleamine 2,3‐dioxygenase 1 (IDO1) targeted tracer. IDO5L is a highly potent inhibitor of IDO1 with low nanomolar IC₅₀. [¹⁸F]IDO5L was synthesized via coupling [¹⁸F]3‐chloro‐4‐fluoroaniline with carboximidamidoyl chloride as a potential PET probe for imaging IDO1 expression. Under the optimized labeling conditions, chemically and radiochemically pure (>98%) [¹⁸F]IDO5L was obtained with specific radioactivity ranging from 11 to 15 GBq/µmol at the end of synthesis within ~90 min, and the decay‐corrected radiochemical yield was 18.2 ± 2.1% (n = 4).     

Fully automated,high yielding production of N‐succinimidyl 4‐[18F]fluorobenzoate ([18F]SFB), and its use in microwave‐enhanced radiochemical coupling reactions

A General Electric Medical Systems (GEMS) Tracerlab FX_FN fluorine‐18 synthesis module has been reconfigured to allow rapid (45 min), fully automated production of N‐succinimidyl 4‐[¹⁸F]fluorobenzoate ([¹⁸F]SFB) using the established three‐step, one‐pot synthesis procedure. Purification is by sep‐pak only and [¹⁸F]SFB is routinely obtained in 38% non‐decay corrected yield,>1 Ci/µmol specific activity, and >95% radiochemical purity (n=20). Moreover, this report includes our preliminary research efforts into improving peptide coupling reactions with [¹⁸F]SFB using microwave‐enhanced radiochemistry. Reaction times can be reduced by>90%, when compared with traditional thermal reactions, with no significant effect on radiochemical reaction yield. Copyright © 2010 John Wiley & Sons, Ltd.     

Radiosynthesis and in vivo study of [18F]1‐(2‐fluoroethyl)‐4‐[(4‐cyanophenoxy)methyl]piperidine: a promising new sigma‐1 receptor ligand

The novel sigma‐1 receptor PET radiotracer [¹⁸F]1‐(2‐fluoroethyl)‐4‐[(4‐cyanophenoxy)methyl]piperidine ([¹⁸F]WLS1.002, [¹⁸F]‐2) was synthesized (n=6) by heating the corresponding N‐ethylmesylate precursor in an anhydrous acetonitrile solution containing [¹⁸F]fluoride, Kryptofix K₂₂₂ and potassium carbonate for 15 min. Purification was accomplished by reverse‐phase HPLC methods, providing [¹⁸F]‐2 in 59±8% radiochemical yield (EOB), with specific activity of 2.89±0.80 Ci/µmol (EOS) and radiochemical purity of 98.3±2.1%. Rat biodistribution studies revealed relatively high uptake in many organs known to contain sigma‐1 receptors, including the lungs, kidney, heart, spleen, and brain. Good clearance from normal tissues was observed over time. Blocking studies (60 min) demonstrated high (>80%) specific binding of [¹⁸F]‐2 in the brain, with reduction also noted in other organs known to express these sites. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of 18F‐labelled biphenyls via SUZUKI cross‐coupling with 4‐[18F]fluoroiodobenzene

The SUZUKI reaction of organoboron compounds with 4‐[¹⁸F]fluoroiodobenzene has been developed as a novel radiolabelling technique in ¹⁸F chemistry. The cross‐coupling reaction of p‐tolylboronic acid with 4‐[¹⁸F]fluoroiodobenzene was used to screen different palladium complexes, bases and solvents. Optimized reaction conditions (Pd₂(dba)₃, Cs₂CO₃, acetonitrile, 60°C for 5 min) were further applied to the synthesis of various ¹⁸F‐labelled biphenyls bearing different functional groups. The reaction proceeded in excellent radiochemical yields of up to 94% within 5 min while showing good compatibility to many functional groups. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of fluorine‐18‐labelled 5‐ and 6‐fluoro‐2‐pyridinamine

A one‐pot radiosynthesis method to prepare the new fluorine‐18‐labelled fluoropyridine derivatives 5‐[¹⁸F]fluoro‐2‐pyridinamine and 6‐[¹⁸F]fluoro‐2‐pyridinamine in two to three reaction steps was developed. The first step consisted of no‐carrier‐added nucleophilic aromatic substitution of commercially available halogen‐substituted 2‐pyridinecarboxamide or 2‐pyridinecarbonitrile derivatives with K[¹⁸F]F‐K₂₂₂ in DMSO at 150–180°C. The [¹⁸F]fluoride incorporation yields ranged from 67 to 98% for all studied precursor molecules. It is remarkable that 5‐bromo‐2‐pyridinecarbonitrile gave almost quantitative [¹⁸F]fluoride incorporation at the meta‐position (5‐position) of the pyridine ring after only 5 min of heating at 150°C. After base‐catalysed hydrolysis of the [¹⁸F]fluorinated pyridinecarbonitriles into their corresponding carboxamides, the latter were transformed in a Hofmann‐type rearrangement reaction into the respective amines by treatment of crude reaction mixtures with bromine and aqueous base (20–30% conversion yield). Reaction mixtures were purified by reversed‐phase semipreparative HPLC followed by strong cation exchange solid‐phase extraction to afford 5‐[¹⁸F]fluoro‐2‐pyridinamine and 6‐[¹⁸F]fluoro‐2‐pyridinamine in non‐decay‐corrected radiochemical yields of 6–10% in a total synthesis time of 83–112 min. The preparation of 5‐[¹⁸F]fluoro‐2‐pyridinamine is one of very few examples demonstrating the feasibility of nucleophilic meta‐[¹⁸F]fluorination of a pyridine derivative. Both 5‐[¹⁸F]fluoro‐2‐pyridinamine and 6‐[¹⁸F]fluoro‐2‐pyridinamine are new potentially useful radiolabelled synthons for radiopharmaceutical chemistry. Copyright © 2006 John Wiley & Sons, Ltd.     

Automated synthesis of 18F‐labelled analogs of metomidate,vorozole and harmine using commercial platform

Three ¹⁸F‐labelled PET tracers, 2‐[¹⁸F]fluoroethyl 1‐[(1R)‐1‐phenylethyl]‐1H‐imidazole‐5‐carboxylate ([¹⁸F]FETO), 6‐[(S)‐(4‐chlorophenyl)‐(1H)‐1,2,4‐triazol‐1‐yl)methyl]‐1‐(2‐[¹⁸F]fluoroethyl)‐1H‐benzotriazole ([¹⁸F]FVOZ) and 7‐[2‐(2‐[¹⁸F]fluoroethoxy)ethoxy]‐1‐9H‐ β ‐carboline ([¹⁸F]FHAR) were synthesized by a one‐step nucleophilic fluorination using the automated commercial platform TRACERLab FX_FN. The labelled products were obtained with 16–20% isolated decay corrected radiochemical yields after 70–75 min synthesis time. The radiochemical and chemical purities were more than 98% in all cases. The synthesis using commercial platform may make these tracers more accessible for clinical research. Copyright © 2010 John Wiley & Sons, Ltd.