How to increase the reactivity of [18F]fluoroethyl bromide: [18F]fluoroethylation of amine,phenol and amide functional groups with [18F]FEtBr, [18F]FEtBr/NaI and [18F]FEtOTf

[¹⁸F]Fluoroethyl bromide ([¹⁸F]FEtBr) is a useful synthetic precursor to synthesize ¹⁸F‐labeled compounds. However, the lower reactivity of [¹⁸F]FEtBr with amine, phenol and amide functional groups than that of [¹¹C]CH₃I partly limits its wide application in the synthesis of [¹⁸F]fluoroethylated compounds. The aim of this study was to increase the reactivity of [¹⁸F]FEtBr with various nucleophilic substrates for PET tracers containing amine, phenol and amide moieties. The present strategies included (1) adding NaI into the reaction mixture of [¹⁸F]FEtBr and substrate, where [¹⁸F]FEtI is reversibly formed and becomes more reactive; (2) converting [¹⁸F]FEtBr into much more reactive [¹⁸F]FEtOTf, similar to conversion of [¹¹C]CH₃I into [¹¹C]CH₃OTf. By these efforts, the [¹⁸F]fluoroethylation efficiency of various substrates containing amine, phenol and amide groups with [¹⁸F]FEtBr/NaI and [¹⁸F]FEtOTf was significantly improved, compared with the corresponding reaction efficiency with [¹⁸F]FEtBr. Copyright © 2003 John Wiley & Sons, Ltd.     

Baeyer‐Villiger oxidation tuned to chemoselective conversion of non‐activated [18F]fluorobenzaldehydes to [18F]fluorophenols

A reaction pathway via oxidation of [¹⁸F]fluorobenzaldehydes offers a very useful tool for the no‐carrier‐added radiosynthesis of [¹⁸F]fluorophenols, a structural motive of several potential radiopharmaceuticals. A considerably improved chemoselectivity of the Baeyer‐Villiger oxidation (BVO) towards phenols was achieved, employing 2,2,2‐trifluoroethanol as reaction solvent in combination with Oxone or m‐CPBA as oxidation agent. The studies showed the necessity of H₂SO₄ addition, which appears to have a dual effect, acting as catalyst and desiccant. For example, 2‐[¹⁸F]fluorophenol was obtained with a RCY of 97% under optimised conditions of 80°C and 30‐minute reaction time. The changed performance of the BVO, which is in agreement with known reaction mechanisms via Criegee intermediates, provided the best results with regard to radiochemical yield (RCY) and chemoselectivity, i.e. formation of [¹⁸F]fluorophenols rather than [¹⁸F]fluorobenzoic acids. Thus, after a long history of the BVO, the new modification now allows an almost specific formation of phenols, even from electron‐deficient benzaldehydes. Further, the applicability of the tuned, chemoselective BVO to the n.c.a. level and to more complex compounds was demonstrated for the products n.c.a. 4‐[¹⁸F]fluorophenol (RCY 95%; relating to 4‐[¹⁸F]fluorobenzaldehyde) and 4‐[¹⁸F]fluoro‐m‐tyramine (RCY 32%; relating to [¹⁸F]fluoride), respectively.     

Fast [18F]FDG synthesis by alkaline hydrolysis on a low polarity solid phase support

The synthesis of 2‐deoxy‐2‐[¹⁸F]fluoro‐D ‐glucose ([¹⁸F]FDG) has been simplified by the use of a ^tC18 Sep Pak cartridge to effect purification and hydrolysis of the tetraacetylated [¹⁸F]fluoro‐glucose compound ([¹⁸F]TAG). After radiolabelling, this derivative was trapped on a solid phase extraction (SPE) cartridge and the residual reaction solvent (CH₃CN), reagents (K222, K₂CO₃,…) and by‐products removed by washing the support with water. After this cleaning step, the acetyl groups were cleaved on the same ^tC₁₈ column using 2N sodium hydroxide. This fast reaction proceeded near quantitatively (>98%) at room temperature in less than 2 min. The [¹⁸F]FDG was then recovered with a small amount of water, neutralized with a slight excess of 2N hydrochloric acid, buffered for pH with a citrate solution and finally purified on a neutral alumina oxide and a second ^tC18 column. After filtration, the radiochemical yield of this [¹⁸F]FDG isotonic solution after more than 100 production runs was found to be very reliable and reproducible (70±6% decay corrected). The synthesis time was about 22 min. Quality controls showed that the radiochemical purity was higher than 98% and in any case no [¹⁸F]FDM was detected. Only traces of 2‐chloro‐2‐deoxy‐glucose (ClDG) were found in the final sample (64±9 μg/ batch of 16 ml). [¹⁸F]FDG specific activity averaged between 1 and 20 Ci/µmol (EOS). No evaporation and use of ion retardation resin (AG11A8) are required. Moreover, this new approach is suitable for complete remote operation using available single use medical components. Copyright © 2002 John Wiley & Sons, Ltd.     

Vacuum ultraviolet photon–mediated production of [18F]F2

The chemistry of F₂ and its derivatives are amenable to facile aliphatic or aromatic substitution, as well as electrophilic addition. The main limitation in the use of [¹⁸F]F₂ for radiopharmaceutical synthesis is the low specific activity achieved by the traditional methods of production. The highest specific activities, 55 GBq/μmol, for [¹⁸F]F₂ have been achieved so far by using electrical discharge in the post‐target production of [¹⁸F]F₂ gas from [¹⁸F]CH₃F. We demonstrate that [¹⁸F]F₂ is produced by illuminating a gas mixture of neon/F₂/[¹⁸F]CH₃F with vacuum ultraviolet photons generated by an excimer laser. We tested several illumination chambers and production conditions. The effects of the initial amount of [¹⁸F]F^‐, amount of carrier F₂, and number of 193‐nm laser pulses at constant power were evaluated regarding radiochemical yield and specific activity. The specific activity attained for [¹⁸F]F₂‐derived [¹⁸F]NFSi was 10.3 ± 0.9 GBq/μmol, and the average radiochemical yield over a wide range of conditions was 6.7% from [¹⁸F]F^‐. The production can be improved by optimization of the synthesis device and procedures. The use of a commercially available excimer laser and the simplicity of the process can make this method relatively easy for adaptation in radiochemistry laboratories.     

Synthesis of [18F]fluoroacetaldehyde. Application to [18F]fluoroethylation of benzylamine under reductive alkylation conditions

The radiosynthesis of a new [¹⁸F]fluoroalkylating agent, [¹⁸F]fluoroacetaldehyde, is described. It was produced using the Kornblum method by oxidation with dimethyl sulphoxide of 2‐[¹⁸F]fluoroethyl p‐toluenesulphonate ([¹⁸F]FETos). In these conditions the oxidation proceeds smoothly and rapidly to the selective conversion of tosyl esters of primary alcohols to aldehydes with no carboxylic acids being produced. The chemical identity of [¹⁸F]fluoroacetaldehyde was determined by comparing its chromatographic properties as well as those of its 2,4‐dinitrophenylhydrazone (2,4‐DNPH) derivative with those of, respectively, the standard fluoroacetaldehyde and its 2,4‐DNPH derivative. Standard fluoroacetaldehyde was prepared by oxidation of fluoroethanol with pyridinium dichromate and characterized as its 2,4‐DNPH derivative by mass spectrometry. To test its reactivity with amines under reductive alkylation conditions, [¹⁸F]fluoroacetaldehyde was reacted with benzylamine used as model substrate. The chemical identity of the resulting radiolabelled product was determined to be [¹⁸F]N‐(2‐fluoroethyl)‐benzylamine by comparing its chromatographic properties with those of the synthesized standard N‐(2‐fluoroethyl)‐benzylamine characterized by ¹⁹F and ¹H NMR spectroscopy and mass spectrometry. This new fluorine‐18 labelled synthon may find applications in radiolabelling peptide, protein and antibody fragments as well as in aldol condensation or in the Mannich reaction. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of a phenolic precursor and its efficient O‐[18F]fluoroethylation with purified no‐carrier‐added [18F]2‐fluoroethyl brosylate as the labeling agent

[¹⁸F]2‐Fluoroethyl‐p‐toluenesulfonate also called [¹⁸F]2‐fluoroethyl tosylate has been widely used for labeling radioligands for positron emission tomography (PET). [¹⁸F]2‐Fluoroethyl‐4‐bromobenzenesulfonate, also called [¹⁸F]2‐fluoroethyl brosylate ([¹⁸F]F(CH₂)₂OBs), was used as an alternative radiolabeling agent to prepare [¹⁸F]FEOHOMADAM, a fluoroethoxy derivative of HOMADAM, by O‐fluoroethylating the phenolic precursor. Purified by reverse‐phase HPLC, the no‐carrier‐added [¹⁸F]F(CH₂)₂OBs was obtained in an average radiochemical yield (RCY) of 35%. The reaction of the purified and dried [¹⁸F]F(CH₂)₂OBs with the phenolic precursor was performed by heating in DMF and successfully produced [¹⁸F]FEOHOMADAM, after HPLC purification, in RCY of 21%. Copyright © 2013 John Wiley & Sons, Ltd.     

Syntheses of meta-[F]Fluorobenzaldehyde and meta-[F]Fluorobenzylbromide from Phenyl(3-Formylphenyl) Iodonium Salt Precursors

¹⁸F‐labeled fluorobenzaldehydes and fluorobenzylbromides are useful synthons for the preparation of positron emission tomography radiopharmaceuticals. Although ortho‐ and para‐[¹⁸F]fluorobenzaldehydes can easily be prepared with high yields, the corresponding meta‐derivatives are more problematic. In order to improve the yield of meta‐[¹⁸F]fluorobenzaldehyde, we used the corresponding diaryliodonium salt precursors, since diaryliodonium salts had already been used as precursors in the preparations of ¹⁸F‐labeled electron‐rich, as well as electron‐deficient, aromatic rings. Diaryliodonium salts with different counter ions [PhIPhCHO]X (X = Cl, Br, OTs, OTf) were synthesized. ¹⁸F radiolabeling was performed using different bases at different temperatures in the presence of a radical scavenger, 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO). The best conversion (～80%) to meta‐[¹⁸F]fluorobenzaldehyde was obtained using CsHCO₃ base at a reaction temperature of 110°C. To study iodonium salt counter ion effects on radiofluorination, each precursor was separately treated with Cs[¹⁸F]F/CsHCO₃ in DMF at 110°C for 5 min in the presence of TEMPO. Our observed reactivity order was OTsMeta‐[¹⁸F]fluorobenzaldehyde thus obtained was reduced to the corresponding alcohol with aqueous NaBH₄ at room temperature and then converted to meta‐[¹⁸F]fluorobenzylbromide using triphenylphosphine dibromide. Formation of meta‐[¹⁸F]fluorobenzylbromide was confirmed using high‐performance liquid chromatography and the desired product was purified on a silica Sep ‐ Pak^® plus cartridge. Published in 2011 by John Wiley & Sons, Ltd.     

Comparison of synthesis yields of 3′‐deoxy‐3′‐[18F]fluorothymidine by nucleophilic fluorination in various alcohol solvents

[¹⁸F]Fluorothymidine ([¹⁸F]FLT) is synthesized with a high radiochemical yield by nucleophilic substitution in protic solvent. In this study, we compared [¹⁸F]fluorination yields of [¹⁸F]fluorothymidine ([¹⁸F]FLT) in various alcohol solvents: 3,3‐dimethyl‐1‐butanol, 2‐trifluoromethyl‐2‐propanol, t‐BuOH (2‐methyl‐2‐propanol), t‐amyl alcohol (2‐methyl‐2‐butanol), thexyl alcohol (2,3‐dimethyl‐2‐butanol) and 3,3‐dimethyl‐2‐butanol. We used 5′‐O‐DMTr‐2′‐deoxy‐3′‐O‐nosyl‐β‐D‐threopentofuranosyl)‐3‐N‐BOC‐thymine as a precursor for [¹⁸F]fluorination. [¹⁸F]F^? was eluted with TBAHCO₃ solution after trapping [¹⁸F]F^? on a PS‐HCO₃ cartridge. [¹⁸F]fluorination was performed at 100°C for 5–30 min using 20 mg of the precursor. [¹⁸F]fluorination and radiochemical yields of [¹⁸F]FLT were evaluated by radioTLC. [¹⁸F]fluorination yields were dependent on the solvent used. All tertiary alcohol solvents, except 2‐trifluoromethyl‐2‐propanol, showed >85% of [¹⁸F]fluorination yields, whereas primary and secondary alcohols showed 26.3–71.8%. The highest yield of 94.1±4.4% was obtained with thexyl alcohol after [¹⁸F]fluorination for 5 min. Automated synthesis with t‐amyl alcohol resulted in high synthetic yields of 64.6±6.1% after high‐performance liquid chromatography purification (n=43). The use of tertiary alcohol as a solvent provides high radiochemical yields of [¹⁸F]FLT. Copyright © 2008 John Wiley & Sons, Ltd.     

Automated synthesis and purification of [18F]fluoro‐[di‐deutero]methyl tosylate

Automated synthetic procedures of [¹⁸F]fluoro‐[di‐deutero]methyl tosylate on a GE TRACERlab FX F‐N module and a non‐commercial synthesis module have been developed. The syntheses included azeotropic drying of the [¹⁸F]fluoride, nucleophilic ¹⁸F‐fluorination of bis(tosyloxy)‐[di‐deutero]methane, HPLC purification and subsequent formulation of the synthesized [¹⁸F]fluoro‐[di‐deutero]methyl tosylate (d₂‐[¹⁸F]FMT) in organic solvents. Automation shortened the total synthesis time to 50 min, resulting in an average radiochemical yield of about 50% and high radiochemical purity (>98%). The possible application of this procedure to commercially available synthesis modules might be of significance for the production of deuterated ¹⁸F‐fluoromethylated imaging probes in the future. Copyright © 2013 John Wiley & Sons, Ltd.     

A facile automated synthesis of N‐succinimidyl 4‐[18F]fluorobenzoate ([18F]SFB) for 18F‐labeled cell‐penetrating peptide as PET tracer

A fully automated synthesis of N‐succinimidyl 4‐[¹⁸F]fluorobenzoate ([¹⁸F]SFB) was carried out by a convenient three‐step, one‐pot procedure on the modified TRACERlab FX_FN synthesizer, including [¹⁸F]fluorination of ethyl 4‐(trimethylammonium triflate)benzoate as the precursor, saponification of the ethyl 4‐[¹⁸F]fluorobenzoate with aqueous tetrapropylammonium hydroxide instead of sodium hydroxide, and conversion of 4‐[¹⁸F]fluorobenzoate salt ([¹⁸F]FBA) to [¹⁸F]SFB treated with N,N,N′,N′‐tetramethyl‐O‐(N‐succinimidyl)uranium tetrafluoroborate (TSTU). The purified [¹⁸F]SFB was used for the labeling of Tat membrane‐penetrating peptide (containing the Arg‐Lys‐Lys‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Pro‐Leu‐Gly‐Leu‐Ala‐Gly‐Glu‐Glu‐Glu‐Glu‐Glu‐Glu‐Glu sequence, [¹⁸F]CPP) through radiofluorination of lysine amino groups. The uncorrected radiochemical yields of [¹⁸F]SFB were as high as 25–35% (based on [¹⁸F]fluoride) (n=10) with a synthesis time of～40 min. [¹⁸F]CPP was produced in an uncorrected radiochemical yields of 10–20% (n=5) within 30 min (based on [¹⁸F]SFB). The radiochemical purities of [¹⁸F]SFB and [¹⁸F]CPP were greater than 95%. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of a [18F]fluorobenzothiazole as potential amyloid imaging agent

This study describes the synthesis of a fluoroethylated derivative of [N‐methyl‐¹¹C]2‐(4′‐methylaminophenyl)‐6‐hydroxybenzothiazole ([¹¹C]6‐OH‐BTA‐1; Pittsburgh Compound B (PIB)), an already established amyloid imaging agent. The [¹¹C]methylamino group of [¹¹C]6‐OH‐BTA‐1 was formally replaced by a fluoroethyl group in a cold synthesis via N‐alkylation of N‐Boc‐2‐(4′‐aminophenyl)‐6‐(methoxyethoxymethoxy)benzothiazole with fluoroethyl tosylate. Subsequent deprotection gave the target compound 2‐[4′‐(2‐fluoroethyl)aminophenyl]‐6‐hydroxybenzothiazole (FBTA). In a radioligand competition assay on aggregated synthetic amyloid fibrils using N‐[³H‐methyl]6‐OH‐BTA‐1, 100 nM FBTA inhibited binding with 93 ± 1 and 83 ± 1% efficiency for Aβ_1–40 and Aβ_1–42, respectively. For the radiosynthesis a precursor carrying a tosylethyl moiety was prepared allowing the introduction of [¹⁸F]fluoride via nucleophilic substitution with [¹⁸F]tetra‐n‐butyl‐ammonium fluoride (TBAF). Subsequent removal of all protecting groups was performed in a one‐pot procedure followed by semi‐preparative HPLC, delivering the target compound [¹⁸F]FBTA in good radiochemical yield of 21% on average and radiochemical purity of ?98% at EOS. In vitro autoradiography on human postmortem AD brain tissue slices showed intense cortical binding of [¹⁸F]FBTA (1 nM), which was displaced in presence of 6‐OH‐BTA‐1 (1 µM). Brain up‐take was evaluated in wild‐type (wt) mice with microPET imaging. Based on these results, [¹⁸F]FBTA appears to be a suitable candidate tracer for amyloid imaging in humans. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of 18F‐labelled biphenyls via SUZUKI cross‐coupling with 4‐[18F]fluoroiodobenzene

The SUZUKI reaction of organoboron compounds with 4‐[¹⁸F]fluoroiodobenzene has been developed as a novel radiolabelling technique in ¹⁸F chemistry. The cross‐coupling reaction of p‐tolylboronic acid with 4‐[¹⁸F]fluoroiodobenzene was used to screen different palladium complexes, bases and solvents. Optimized reaction conditions (Pd₂(dba)₃, Cs₂CO₃, acetonitrile, 60°C for 5 min) were further applied to the synthesis of various ¹⁸F‐labelled biphenyls bearing different functional groups. The reaction proceeded in excellent radiochemical yields of up to 94% within 5 min while showing good compatibility to many functional groups. Copyright © 2006 John Wiley & Sons, Ltd.     

Development of novel PET probes, [18F]BCPP‐EF, [18F]BCPP‐BF,and [11C]BCPP‐EM for mitochondrial complex 1 imaging in the living brain

We developed three novel positron‐emission tomography (PET) probes, 2‐tert‐butyl‐4‐chloro‐5‐{6‐[2‐(2[¹⁸F]fluoroethoxy)‐ethoxy]‐pyridin‐3‐ylmethoxy}‐2H‐pyridazin‐3‐one ([¹⁸F]BCPP‐EF), 2‐tert‐butyl‐4‐chloro‐5‐[6‐(4‐[¹⁸F]fluorobutoxy)‐pyridin‐3‐ylmethoxy]‐2H‐pyridazin‐3‐one ([¹⁸F]BCPP‐BF), and 2‐tert‐butyl‐4‐chloro‐5‐{6‐[2‐(2‐[¹¹C]methoxy‐ethoxy)‐ethoxy]‐pyridin‐3‐ylmethoxy}‐2H‐pyridazin‐3‐one ([¹¹C]BCPP‐EM), for quantitative imaging of mitochondrial complex 1 (MC‐1) activity in vivo. These three PET probes were successfully labeled by nucleophilic [¹⁸F]fluorination or by [¹¹C]methylation of their corresponding precursor with sufficient radioactivity yield, good radiochemical purity, and sufficiently high specific radioactivity for PET measurement. The specificity of these probes for binding to MC‐1 was assessed with rotenone, a specific MC‐1 inhibitor, by a rat brain slice imaging method in vitro. Rat whole‐body imaging by small‐animal PET demonstrated that all probes showed high uptake levels in the brain as well as in the heart sufficient to image them clearly. The rank order of uptake levels in the brain and the heart just after injection was as follows: high in [¹⁸F]BCPP‐BF, intermediate in [¹¹C]BCPP‐EM, and low in [¹⁸F]BCPP‐EF. The kinetics of [¹⁸F]BCPP‐EF and [¹¹C]BCPP‐EM provided a reversible binding pattern, whereas [¹⁸F]BCPP‐BF showed nonreversible accumulation‐type kinetics in the brain and heart. Metabolite analyses indicated that these three compounds were rapidly metabolized in the plasma but relatively stable in the rat brain up to 60 min post‐injection. The present study demonstrated that [¹⁸F]BCPP‐EF could be a useful PET probe for quantitative imaging of MC‐1 activity in the living brain by PET.     

Development of a new precursor‐minimizing base control method and its application for the automated synthesis and SPE purification of [18F]fluoromisonidazole ([18F]FMISO)

Bases such as potassium carbonate and potassium bicarbonate (KHCO₃) are essential for the elution of trapped [¹⁸F]fluoride from ion exchange cartridges and for the prevention of [¹⁸F]fluoride adsorption on the silica glass vial during the preparation of radiopharmaceuticals for positron emission tomography imaging. However, these bases promote the chemical decomposition of precursor compounds and the creation of unwanted organic impurities. Thus, the goal of the current study was to develop a new method for synthesizing [¹⁸F]fluoride‐labeled radiopharmaceuticals (e.g., [¹⁸F]fluoromisonizadole ([¹⁸F]FMISO)) that permits the fine control of base concentrations while minimizing adverse events. Non‐decay‐corrected radiochemical yields of 25.1 ± 5.0% and 13.3 ± 5.1% (n = 3) were achieved after solid‐phase extraction purification using automatic synthesis with GE TRACERlab MX and KHCO₃ at concentrations of 14.1 and 33.0 µmol, respectively, and 1 mg of precursor (1‐(2′‐nitro‐1′‐imidazolyl)‐2‐O‐tetra‐hydropyranyl‐3‐O‐toluenesulfonyl propanediol (NITTP)). The newly developed synthesis protocol with fine base control and low precursor content permits high radiochemical yields with minimal impurities. Copyright © 2013 John Wiley & Sons, Ltd.     

One‐step radiosynthesis of 4‐nitrophenyl 2‐[18F]fluoropropionate ([18F]NFP); improved preparation of radiolabeled peptides for PET imaging

The versatile ¹⁸F‐labeled prosthetic group, 4‐nitrophenyl 2‐[¹⁸F]fluoropropionate ([¹⁸F]NFP), was synthesized in a single step in 45 min from 4‐nitrophenyl 2‐bromopropionate, with a decay corrected radiochemical yield of 26.2% ± 2.2%. Employing this improved synthesis of [¹⁸F]NFP, [¹⁸F]GalactoRGD — the current ‘gold standard’ tracer for imaging the expression of α_Vβ₃ integrin — was prepared with high specific activity in 90 min and 20% decay corrected radiochemical yield from [¹⁸F]fluoride.     

Efficient Radiosynthesis of 2-[18F]Fluoroadenosine: A New Route to 2-[18F]Fluoropurine Nucleosides

相似文献   

Degradation of acetonitrile in eluent solutions for [18F]fluoride PET chemistry: impact on radiosynthesis of [18F]FACBC and [18F]FDG

In [¹⁸F]fluoride chemistry, an eluent solution containing a weak aqueous base is used to release [¹⁸F]fluoride after adsorption on an anion exchange resin. Traditionally, the eluent solution is freshly prepared, but modern PET tracer manufacturers may utilize the benefits of preparing bulk solutions or prefilled vials for storage. We discovered that typical eluent solutions containing kryptofix and K₂CO₃ in aqueous acetonitrile degraded upon storage. Acetonitrile will at alkaline pH hydrolyse to acetamide and ammonium acetate. Acetate may serve as a competing nucleophile to [¹⁸F]fluoride. Eluent solutions used in the synthesis of [¹⁸F]FACBC and [¹⁸F]FDG generated mg/ml levels of acetamide and ammonium acetate during storage at room temperature or above. The synthesis of [¹⁸F]FACBC was prone to eluent degradation, with gradual reduction of radiochemical yield (RCY) from 62.5% to 44.7% during 12 months of storage at 30 °C. The synthesis of [¹⁸F]FDG was only affected when the eluent was stored at 50 °C, reducing the RCY from 86.8% to 66.7% after 3 months of storage. For degradation effects to be avoided, an alternative eluent solution with no acetonitrile was investigated in the synthesis of [¹⁸F]FACBC. A methanol‐based eluent was successfully made, showing no degradation and unchanged RCY after 6 months of storage at 50 °C. Copyright © 2012 John Wiley & Sons, Ltd.     

Radiosynthesis of 3‐(2′‐[18F]fluoro)‐flumazenil ([18F]FFMZ)

Recently, two fluorine‐18 labelled derivatives of flumazenil were described: 5‐(2′‐[¹⁸F]fluoroethyl)‐5‐desmethylflumazenil (ethyl 8‐fluoro‐5‐[¹⁸F]fluoroethyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a] [1,4]diazepine‐3‐carboxylate; [¹⁸F]FEFMZ) and 3‐(2′‐[¹⁸F]fluoro)‐flumazenil (2′‐[¹⁸F]fluoroethyl 8‐fluoro‐5‐methyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a]‐[1,4]diazepine‐3‐carbo‐ xylate; [¹⁸F]FFMZ). Since the biodistribution data of the latter were superior to those of the former we developed a synthetic approach for [¹⁸F]FFMZ starting from a commercially available precursor, thereby obviating the need to prepare a precursor by ourselves. The following two‐step procedure was developed: First, [¹⁸F]fluoride was reacted with 2‐bromoethyl triflate using the kryptofix/acetonitrile method to yield 2‐bromo‐[¹⁸F]fluoroethane ([¹⁸F]BFE). In the second step, distilled [¹⁸F]BFE was reacted with the tetrabutylammonium salt of 3‐desethylflumazenil (8‐fluoro‐5‐methyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a] [1,4]diazepine‐3‐carboxylic acid) to yield [¹⁸F]FFMZ. The synthesis of [¹⁸F]FFMZ allows for the production of up to 7 GBq of this PET‐tracer, enough to serve several patients. [¹⁸F]FFMZ synthesis was completed in less than 80 min and the radiochemical purity exceeded 98%. Copyright © 2003 John Wiley & Sons, Ltd.     

A simple and rapid automated radiosynthesis of [18F]fluoroacetate

Two fully automated synthetic procedures of [¹⁸F]fluoroacetate ([¹⁸F]FAC) have been developed using a modified commercial TRACERlab FX_FN synthesizer. One was a two‐step one‐pot procedure, consisting of nucleophilic [¹⁸F]fluorination of benzyl‐2‐bromoacetate as a precursor with no‐carrier‐added [¹⁸F]fluoride, hydrolysis within the same [¹⁸F]fluorination reaction vessel, and purification with/without high‐performance liquid chromatography (HPLC). The second procedure consisted of nucleophilic [¹⁸F]fluorination, hydrolysis on the column, and purification with SEP‐PAK cartridges instead of HPLC. The radiochemical purity of [¹⁸F]FAC was >95% by the two procedures. The second procedure was a simple, rapid, and fully automated synthesis of [¹⁸F]FAC with a high and reproducible radiochemical yield exceeding 60% (decay uncorrected) within the total synthesis time less than 20 min. The new, simple, and rapid on‐column hydrolysis procedure should be adaptable to the fully automated synthesis of [¹⁸F]FAC at a commercial fluoro‐deoxyglucose synthesis module. Copyright © 2008 John Wiley & Sons, Ltd.     

Radiosynthesis of 4‐[18F]fluoromethyl‐L‐phenylalanine and [18F]FET via a same strategy and automated synthesis module

Currently there is still a need for more potent amino acid analogues as tumour imaging agents for peripheral tumour imaging with PET as it was recently reported that the success of O‐(2′‐[¹⁸F]fluoroethyl)‐L ‐tyrosine ([¹⁸F]FET) is limited to brain, head and neck tumours. As the earlier described 2‐Amino‐3‐(2‐[¹⁸F]fluoromethyl‐phenyl)‐propionic acid (2‐[¹⁸F]FMP) suffered from intramolecular‐catalysed defluorination, we synthesized 2‐Amino‐3‐(4‐[¹⁸F]fluoromethyl‐phenyl)‐propionic acid (4‐[¹⁸F]FMP) as an alternative for tumour imaging with PET. Radiosynthesis of 4‐[¹⁸F]FMP, based on Br for [¹⁸F] aliphatic nucleophilic exchange, was performed with a customized modular Scintomics automatic synthesis hotbox^three system in a high overall yield of 30% and with a radiochemical purity of \gt 99%. 4‐[¹⁸F]FMP was found to be stable in its radiopharmaceutical formulation, even at high radioactivity concentrations. Additionally, for a comparative study, [¹⁸F]FET was synthesized using the same setup in 40% overall yield, with a radiochemical purity \gt 99%. The described automated radiosynthesis allows the production of two different amino acid analogues with minor alternations to the parameter settings of the automated system, rendering this unit versatile for both research and clinical practice. Copyright © 2009 John Wiley & Sons, Ltd.