Carbopol 934-Sodium Alginate-Gelatin Mucoadhesive Ondansetron Tablets for Buccal Delivery: Effect of pH Modifiers

The present work aims at developing mucoahesive tablets of ondansetron hydrochloride using bioadhesive polymers like carbopol-934, sodium alginate and gelatin. Tablets prepared by direct compression using different polymer with varying ratio were evaluated for hardness, friability, uniformity of weight, disintegration time, microenvironmental pH, bioadhesion and in vitro release. Hardness, friability disintegration time and drug release were found within pharmacopoeial limit. Microenvironmental pH decreased whereas bioadhesive strength, water uptake, and in vitro release increased with increase in carbopol-934. Increasing sodium alginate and gelatin increased the microenviromental pH and decreased bioadhesive strength, water uptake and in vitro release. With a view to investigate the modulation of drug release from formulation by addition of pH modifiers viz. citric acid and sodium bicarbonate, the tablets with carbopol-934 (2.0), sodium alginate (0.5) and gelatin (6.5) were used and the effect of pH modifiers on microenvironmental pH, bioadhesion, water uptake, in vitro permeation and in vitro release was studied. Microenvironmental pH, bioadhesive strength, water uptake, in vitro release and permeation decreased with increasing concentration of citric acid whereas microenvironmental pH, water uptake and release were enhanced and bioadhesive strength was lowered with increase in sodium bicarbonate. Present study demonstrates carbopol-934, sodium alginate, gelatin polymer system with added pH modifier can be successfully formulated for buccal delivery of ondansetron with desired release profile.     

Ranitidine Hydrochloride-loaded Ethyl Cellulose and Eudragit RS 100 Buoyant Microspheres: Effect of pH Modifiers

A floating type of dosage form of ranitidine hydrochloride in the form of microspheres capable of floating on simulated gastric fluid was prepared by solvent evaporation technique. Microspheres prepared with ethyl cellulose, Eudragit^® RS100 alone or in combination were evaluated for percent yield, drug entrapment, percent buoyancy and drug release and the results demonstrated satisfactory performance. Microspheres exhibited ranitidine hydrochloride release influenced by changing ranitidine hydrochloride-polymer and ranitidine hydrochloride-polymer-polymer ratio. Incorporation of a pH modifier has been the usual strategy employed to enhance the dissolution rate of weakly basic drug from floating microspheres. Further citric acid, fumaric acid, tartaric acid were employed as pH modifiers. Microspheres prepared with ethyl cellulose, Eudragit^® RS100 and their combination that showed highest release were utilized to study the effect of pH modifiers on ranitidine hydrochloride release from microspheres which is mainly affected due to modulation of microenvironmental pH. In vitro release of ranitidine hydrochloride from microspheres into simulated gastric fluid at 37° showed no significant burst effect. However the amount of release increased with time and significantly enhanced by pH modifiers. 15% w/w concentration of fumaric acid provide significant drug release from ranitidine hydrochloride microspheres prepared with ranitidine hydrochloride:ethyl cellulose (1:3), ranitidine hydrochloride:Eudragit^® RS100 (1:2) and ranitidine hydrochloride:ethyl cellulose:Eudragit^® RS100 (1:2:1) whereas citric acid, tartaric acid showed significant cumulative release at 20% w/w. In all this study suggest that ethyl celluose, Eudragit^® RS100 alone or in combination with added pH modifiers can be useful in floating microspheres which can be proved beneficial to enhance the bioavailability of ranitidine hydrochloride.     

长春西汀海藻酸钠骨架片体外释药影响因素研究

目的以海藻酸钠为骨架材料 ,制备长春西汀控释骨架片 ,对影响其体外释放的多种因素进行了考察。方法以海藻酸钠为亲水骨架材料 ,粉末直接压片制备长春西汀控释片 ,采用《中华人民共和国药典》2 0 0 0年版二部收载的溶出度测定方法Ⅱ法 (桨法 ) ,测定药物在不同条件下的体外释放度 ,考察海藻酸钠用量及黏度 ,枸橼酸用量 ,释放介质离子强度和pH值对药物体外释放行为的影响。结果与结论海藻酸钠用量及黏度 ,枸橼酸用量 ,释放介质离子强度和pH值均对药物体外释放行为有显著影响。值得注意的是 ,通过调节处方中枸橼酸用量可以使释药行为达零级 ,这为制备长春西汀控释片提供指导 ,有进一步开发的价值。     

Strategies for the design of hydrophilic matrix tablets with controlled microenvironmental pH

Incorporation of weak acids as pH modifiers enhances the release of weakly basic drugs in higher pH environments by reducing the microenvironmental pH (pHM). The objectives of this study were: (a) to investigate the relationship between pHM, drug release, and pH modifier release and (b) to achieve simultaneous release of the drug and the pH modifier over the entire dissolution time (6 h, phosphate buffer, pH 6.8). Using dipyridamole as a model drug, we investigated drug and acid release and determined the average pHM potentiometrically using tablet cryosections. The first approach was based on incorporating different concentrations of pH modifiers in conventional matrix tablets based on hydroxypropylmethylcellulose. Owing to its high acidic strength and low aqueous solubility, fumaric acid resulted in simultaneous release and maintained a constant acidic pHM. Secondly, press-coated matrix tablets, comprising an acidic reservoir, were found to be a valuable approach for retarding the diffusion of more water-soluble acids. Using the power law expression (Mt/Minfinity = ktn) it became evident that the inclusion of acids increased drug release. Higher acid concentrations tended to decrease n standing for the slope, whereas the release constant k increased. Furthermore, the medial check term parameters depended on the type of pH modifier used.     

Impact of cross-linker on alginate matrix integrity and drug release

Sodium alginate, a biopolymer, was employed in the formulation of matrix tablets. They cracked or laminated at acidic pH, compromising their dissolution performance. Improved mechanical strength and reduced barrier permeability of calcium alginate gel provided the rationale for cross-linking the alginate matrix to sustain drug release. Studies had suggested that the incorporation of soluble calcium salts in alginate matrix tablets could sustain drug release at near-neutral pH due to in situ cross-linking. However, results from the present study showed otherwise when gastrointestinal pH conditions were simulated. Significant reduction in drug release rate was only observed when an external calcium source was utilized at low concentration. High calcium ion concentrations caused matrix disintegration. In contrast, matrices pre-coated by calcium alginate could sustain drug release at pH 1.2 followed by pH 6.8 for over 12h. The presence of cross-linked barrier impeded matrix lamination and preserved matrix structure, contributing to at least three-fold reduction in drug release at pH 1.2. Zero order release as well as delayed burst release could be achieved by employing appropriate grade of alginate and cross-linking conditions.     

Effect of formulation variables on in vitro release of a water-soluble drug from chitosan–sodium alginate matrix tablets

The objective of this study is to investigate the feasibility of using chitosan–sodium alginate (CS–SA) based matrix tablets for extended-release of highly water-soluble drugs by changing formulation variables. Using trimetazidine hydrochloride (TH) as a water-soluble model drug, influence of dissolution medium, the amount of CS–SA, the CS:SA ratio, the type of SA, the type and amount of diluents, on in vitro drug release from CS–SA based matrix tablets were studied. Drug release kinetics and release mechanisms were elucidated. In vitro release experiments were conducted in simulated gastric fluid (SGF) followed by simulated intestinal fluid (SIF). Drug release rate decreased with the increase of CS–SA amount. CS:SA ratio had only slight effect on drug release and no influence of SA type on drug release was found. On the other hand, a large amount of water-soluble diluents could modify drug release profiles. It was found that drug release kinetics showed the best fit to Higuchi equation with Fickian diffusion as the main release mechanism. In conclusion, this study demonstrated that it is possible to design extended-release tablets of water-soluble drugs using CS–SA as the matrix by optimizing formulation components, and provide better understanding about drug release from CS–SA matrix tablets.     

Calcium Alginate Beads as Core Carriers of 5-Aminosalicylic Acid

The utilization of calcium alginate beads as core carriers for delayed dissolution followed by burst release as a potential method of intestinal site specific drug delivery was investigated. 5-Aminosalicylic acid was spray-coated on dried calcium alginate beads and then coated with different percentages of enteric coating polymer and/or sustained-release polymer. Beads coated with more than 6% (w/w) methacrylic copolymer plastisized with dibutyl sebacate and triethyl citrate resisted release in 2-hr acid fluid challenge and allowed immediate dissolution upon transfer to simulated intestinal fluid. With 6% (w/w) methacrylic copolymer on top of 4% (w/w) ethylcellulose polymer, the major portion of drug did not release in 2 hr of acid treatment or the next 3 hr of simulated intestinal fluid treatment. This dosage form provides the possibility to deliver drug to the lower intestinal tract with minimal early release, followed by sustained release in the colon.     

Design of pH-independent extended release matrix tablets of minocycline hydrochloride for the treatment of dementia

The aim of this study was to develop a pH-independent extended release matrix tablet of minocycline HCl for the treatment of dementia. The matrix tablets were prepared by wet granulation technique using Eudragit L and S as release modifiers at different w/w ratios (1:0, 1:1 and 0:1) and PEO as a matrix former. In the case of the matrix tablet without any release modifiers, the drug release rate at pH 1.2 was much higher than that of pH 7.4. By adding the release modifier, the drug release rate at pH 7.4 increased close to that of pH 1.2 and the pH-independent release was obtained. In addition, it was shown that lubricants containing a divalent cation such as Mg stearate inhibited minocycline release in basic medium. Therefore, the incorporation of Eudragit L and S (1:1 ratio) as release modifiers and Na stearyl fumarate as a lubricant into PEO-based matrix tablets effectively produced pH-independent minocycline release profiles.     

Citric acid as excipient in multiple-unit enteric-coated tablets for targeting drugs on the colon

Delivery of drugs to the large bowel has been extensively investigated during the last decade. The aim of this study was to investigate whether enteric-coated tablets could be made from enteric-coated matrix granules and drug release targeted to the colon. Whether in vitro drug release rate and in vivo absorption could be delayed by adding citric acid to the granules and/or to the tablet matrix was also studied. Ibuprofen was used as model drug because it is absorbed throughout the gastrointestinal tract. Eudragit S and Aqoat AS-HF were used as enteric polymers. Drug release rates were studied at different pH levels and drug absorption was studied in bioavailability tests. The conclusion was that citric acid retarded in vitro drug release when used in multiple-unit tablets. In vivo absorption of ibuprofen was markedly delayed when citric acid was included in both granules and tablet matrix. Further studies are needed to determine the optimal amount of citric acid in formulations.     

pH sensitive alginate-guar gum hydrogel for the controlled delivery of protein drugs

Design of a pH sensitive alginate-guar gum hydrogel crosslinked with glutaraldehyde was done for the controlled delivery of protein drugs. Alginate is a non-toxic polysaccharide with favorable pH sensitive properties for intestinal delivery of protein drugs. Drug leaching during hydrogel preparation and rapid dissolution of alginate at higher pH are major limitations, as it results in very low entrapment efficiency and burst release of entrapped protein drug, once it enters the intestine. To overcome these limitations, another natural polysaccharide, guargum was included in the alginate matrix along with a cross linking agent to ensure maximum encapsulation efficiency and controlled drug release. The crosslinked alginate-guar gum matrix is novel and the drug loading process used in the study was mild and performed in aqueous environment. The release profiles of a model protein drug (BSA) from test hydrogels were studied under simulated gastric and intestinal media. The beads having an alginate to guar gum percentage combination of 3:1 showed desirable characters like better encapsulation efficiency and bead forming properties in the preliminary studies. The glutaraldehyde concentration giving maximum (100%) encapsulation efficiency and the most appropriate swelling characteristics was found to be 0.5% (w/v). Freeze-dried samples showed swelling ratios most suitable for drug release in simulated intestinal media ( approximately 8.5). Protein release from test hydrogels was minimal at pH 1.2 ( approximately 20%), and it was found to be significantly higher ( approximately 90%) at pH 7.4. Presence of guar gum and glutaraldehyde crosslinking increases entrapment efficiency and prevents the rapid dissolution of alginate in higher pH of the intestine, ensuring a controlled release of the entrapped drug.     

The manufacture and characterisation of hot-melt extruded enteric tablets

The aim of this highly novel study was to use hot-melt extrusion technology as an alternative process to enteric coating. In so doing, oral dosage forms displaying enteric properties may be produced in a continuous, rapid process, providing significant advantages over traditional pharmaceutical coating technology. Eudragit^® L100-55, an enteric polymer, was pre-plasticized with triethyl citrate (TEC) and citric acid and subsequently dry-mixed with 5-aminosalicylic acid, a model active pharmaceutical ingredient (API), and an optional gelling agent (PVP^® K30 or Carbopol^® 971P). Powder blends were hot-melt extruded as cylinders, cut into tablets and characterised using powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC) and dissolution testing conducted in both pH 1.2 and pH 6.8 buffers. Increasing the concentration of TEC significantly lowered the glass transition temperature (T_g) of Eudragit^® L100-55 and reduced temperatures necessary for extrusion as well as the die pressure. Moreover, citric acid (17% w/w) was shown to act as a solid-state plasticizer. HME tablets showed excellent gastro-resistance, whereas milled extrudates compressed into tablets released more than 10% w/w of the API in acidic media. Drug release from HME tablets was dependent upon the concentration of TEC, the presence of citric acid, PVP K30, and Carbopol^® 971P in the matrix, and pH of the dissolution media. The inclusion of an optional gelling agent significantly reduced the erosion of the matrix and drug release rate at pH 6.8; however, the enteric properties of the matrix were lost due to the formation of channels within the tablet. Consequently this work is both timely and highly innovative and identifies for the first time a method of producing an enteric matrix tablet using a continuous hot-melt extrusion process.     

The influence of Surelease and sodium alginate on the in-vitro release of tamsulosin hydrochloride in pellet dosage form

The objective of this study was to prepare controlled-release pellets containing 0.2 mg tamsulosin hydrochloride using a pelletizer-equipped piston extruder and double-arm counter-rotating rollers with Surelease and sodium alginate. The release of tamsulosin HCl from pellets coated with the commercial aqueous ethylcellulose dispersion (Surelease) was investigated at different coating loads. In addition, the effect of sodium alginate on drug release was investigated by varying the ratio of sodium alginate to microcrystalline cellulose (MCC). Dissolution studies were first performed in 500 mL simulated gastric fluid (pH 1.2) containing 0.003% (w/w) polysorbate 80 and then in simulated intestinal fluids (pH 7.2). The morphology of pellet surfaces and cross sections were examined by scanning electron microscopy (SEM). Apparently, the spherical pellets were prepared using a pelletizer-equipped piston extruder and double-arm counter-rotating rollers. The release profiles of tamsulosin HCl from Surelease-coated pellets were significantly affected by changing the content of Surelease, the pH of the dissolution medium and the ratio of sodium alginate to MCC. The drug release rates not only decreased with increase in the coating load, but also increased when the pH of the dissolution medium was increased from 1.2 to 7.2 regardless of the sodium alginate-to-MCC ratio. Moreover, the drug release rate at pH 7.2 was gradually increased by increasing the ratio of sodium alginate to MCC. SEM showed smooth surfaces of Surelease-coated pellets. These results suggest that Surelease and sodium alginate would be useful excipients in the preparation of controlled-release pellets with the desired release profiles.     

A comparative in vitro assessment of the drug release performance of pH-responsive polymers for ileo-colonic delivery

The aim of this study was to investigate the in vitro dissolution characteristics of pH-responsive polymers in a variety of simulated fluids. Prednisolone tablets were fabricated and coated with the following polymer systems: Eudragit S (organic solution), Eudragit S (aqueous dispersion), Eudragit FS (aqueous dispersion) and Eudragit P4135 (organic solution). Dissolution tests were conducted using a pH change method whereby tablets were transferred from acid to buffer. Three different buffer media were investigated: two compendial phosphate buffers (pH range 6.8-7.4) and a physiological buffer solution (Hanks buffer) with very similar ionic composition to intestinal fluid (pH 7.4). There was considerable drug release from tablets coated with Eudragit P4135 in acid, prompting discontinuation of further investigations of this polymer. Eudragit S (organic solution), Eudragit S (aqueous dispersion) and Eudragit FS on the other hand prevented drug release in acid, though subsequent drug release in the buffer media was found to be influenced by the duration of tablet exposure to acid. At pH 7.4 drug release rate from the polymer coated tablets was similar in the two compendial media, however in the physiological buffer, they were found to differ in the following order: Eudragit S (aqueous dispersion)>Eudragit FS>Eudragit S (organic solution). The results indicate that the tablets coated with the newer Eudragit FS polymer would be more appropriate for drug delivery to the ileo-colonic region in comparison to the more established Eudragit S. More importantly, however, dissolution in the physiological buffer was found to be markedly slower for all the coated tablets than in the two compendial buffers, a result akin to reported slower dissolution of enteric coated tablets in vivo. There is therefore the need to adequately simulate the ionic composition of the intestinal fluid in the dissolution media.     

甲磺酸依普沙坦片在4种溶出介质中的体外溶出度研究

目的:建立甲磺酸依普沙坦片体外溶出度测定方法并考察其在4种不同介质中的溶出度。方法:依据《中国药典》2010版中的桨法,分别以0.2mol·L-1盐酸溶液(pH1.2)、pH4.0和pH6.8的磷酸盐缓冲液及水为介质,采用紫外分光光度法,在286nm波长下测定溶液吸光度并计算溶出度。结果:甲磺酸依普沙坦检测浓度线性范围为1.6～15μg·mL-1,平均回收率为99.89%,RSD=0.67%;甲磺酸依普沙坦片在4种介质中的溶出情况呈pH依赖性,其在pH1.2、pH4.0、水和pH6.8的介质中15min体外溶出度分别为35%、55%、65%、90%左右。结果:所建立的溶出度测定方法可靠、准确、重复性好,甲磺酸依普沙坦片在不同介质中溶出速度明显不同。     

Synthesis and Characterization of Sodium Alginate Conjugate and Study of Effect of Conjugation on Drug Release from Matrix Tablet

The aim of the present research work to study the effect of conjugation of the polymer on drug release from the matrix tablets. Sodium alginate L-cysteine conjugate was achieved by covalent attachment of thiol group of L-cysteine with the primary amino group of sodium alginate through the amide bonds formed by primary amino groups of the sodium alginate and the carboxylic acid group of L-cysteine. The synthesised sodium alginate L-cysteine conjugate was characterised by determining of charring point, Fourier transmission-infrared and differential scanning calorimetric analysis. To study the effect of conjugation on drug release pattern, the matrix tablets were prepared using various proportions of sodium alginate and sodium alginate L-cysteine conjugate along with atorvastatin calcium as model drug. The wet granulation technique was adopted and prepared matrix tablets were evaluated for various physical parameters. The in vitro drug release study results suggested that tablet formulated in combination of sodium alginate and sodium alginate L-cysteine conjugate S4 showed 100% after 8 h drug release whereas formulated with only sodium alginate S0 released 40% in 8 h.     

硝苯地平缓释凝胶的制备工艺及其释药性能研究

目的:制备硝苯地平缓释凝胶并考察其体外释药情况。方法:采用复凝聚法制备硝苯地平缓释凝胶,以壳聚糖、海藻酸钠的浓度、搅拌速度和壳聚糖溶液与海藻酸钠溶液的体积比为因素进行正交试验;用转篮法测定所制凝胶的释放度,通过改变释放介质的pH值,考察该缓释药物对pH的敏感性。结果:最佳工艺为壳聚糖浓度0.4%、海藻酸钠浓度1.5%、搅拌速度160r.min-1、壳聚糖溶液与海藻酸钠溶液的体积比为6:1。硝苯地平缓释凝胶在pH1.5的人工胃液中4h释放度为13.43%;在pH6.8的人工肠液中4h释放度为52.30%,12h释放度为81.72%。结论:所制硝苯地平缓释凝胶具有明显的缓释作用,体外释放具有较强的pH敏感性。     

Swelling, erosion and release behavior of alginate-based matrix tablets.

Hydrophilic matrix tablets based on the alginate system have been used in relation to their possible function in modified drug delivery formulations using metronidazole as a model drug. The matrix tablets were prepared by direct compression using different grades of alginate. The effect of some factors (i.e. particle size of drug, additive used, and pH of medium) on drug release from alginate-based matrix tablets was also investigated. Swelling, erosion, and in vitro release studies of the matrix tablets were carried out in 0.1N HCl or phosphate buffer (pH 6.8). The alginate-based matrix tablets swelled or eroded while in contact with the aqueous medium and formed a continuous gel layer or underwent combination of swelling and erosion. The swelling action of alginate matrices is controlled by the rate of its hydration in the medium. Different grades of alginate insignificantly influenced the matrix swelling in acidic medium but significantly influenced in neutral medium. The presence of ammonium or calcium salts induced tablet disintegration in acidic medium. However, incorporation of calcium acetate and sodium bicarbonate can alter the tablet swelling in acidic medium. Release studies showed that all investigated factors influence the drug release. The extent of matrix swelling, erosion, and diffusion of drug determined the kinetics as well as mechanism of drug release from alginate-based matrix tablets. Most of the release data in acidic medium showed a good fit into Korsmeyer-Peppas equation but fitted well with zero-order release model, in neutral medium.     

Novel pH-sensitive citrate cross-linked chitosan film for drug controlled release

Turbidimetric titration revealed that there were electrostatic attractive interactions between citrate and chitosan in the pH region of 4.3-7.6, depending on their degree of ionization. Citrate cross-linked chitosan film was prepared simply by dipping chitosan film into sodium citrate solution. The swelling ratio of citrate/chitosan film was sensitive to pH, ionic strength etc. Under acidic conditions, citrate/chitosan film swelled and even dissociated in the pH less than 3.5, and the model drugs (brilliant blue and riboflavin) incorporated in the film were released quickly (usually within 2 h released completely in simulated gastric fluid at 37 degrees C) while under neutral conditions the swelling ratio of citrate/chitosan film was less significant and the release rate of brilliant blue and riboflavin was low (less than 40% released in simulated intestinal fluid in 24 h). Sodium chloride weakened the electrostatic interaction between citrate and chitosan, and therefore facilitated the film swelling and accelerated drug release. The parameters of film preparation such as citrate concentration, solution pH etc. influencing the film swelling and drug release profiles were examined. The lower concentration and the higher pH of citrate solution resulted in a larger swelling ratio and quicker riboflavin release. To improve the drug controlled release properties of citrate/chitosan film, heparin, pectin and alginate were further coated on the film surface. Among them only the coating of alginate prolonged riboflavin release noticeably (for 80% of drug released the time was extended from 1.5 to 3.5 h with 0.5% w/v alginate used). The results indicated that the citrate/chitosan film was useful in drug delivery such as for the site-specific drug controlled release in stomach.     

Biphasic release characteristics of dual drug-loaded alginate beads

The dual drug-loaded alginate beads simultaneously containing drug in inner and outer layers were prepared by dropping plain (single-layered) alginate beads into CaCl₂ solution. The release characteristics were evaluated in simulated gastric fluid for 2 h followed by intestinal fluids thereafter for 12 h. The surface morphology and cross section of dual drug-loaded alginate beads was also investigated using scanning electron microscope (SEM). The poorly water-soluble ibuprofen was chosen as a model drug. The surface of single-layered and dual drug-loaded alginate beads showed very crude and roughness, showing aggregated particles, surface cracks and rough crystals. The thickness of dual drug-loaded alginate beads surrounded by outer layer was ranged from about 57 to 329μm. The distinct chasm between inner and outer layers was also observed. In case of single-layered alginate beads, the drug was not released in gastric fluid but was largely released in intestinal fluid. However, the release rate decreased as the reinforcing Eudragit^® polymer contents increased. When the plasticizers were added into polymer, the release rate largely decreased. The release rate of dual drug-loaded alginate beads was stable in gastric fluid for 2 h but largely increased when switched in intestinal fluid. The drug linearly released for 4 h followed by another linear release thereafter, showing a distinct biphasic release characteristics. There was a difference in the release profiles between single-layered and dual drug-loaded alginate beads due to their structural shape. However, this biphasic release profiles were modified by varying formulation compositions of inner and outer layer of alginate beads. The release rate of dual drug-loaded alginate beads slightly decreased when the outer layer was reinforced with Eudragit^® RS100 polymers. In case of dual drug-loaded alginate beads with polymer-reinforced outer layer only, the initial amount of drug released was low but the initial release rate (slope) was higher due to more swellable inner cores when compared to polymer-reinforced inner cores. The current dual drug-loaded alginate beads may be used to deliver the drugs in a time dependent manner.     

对乙酰氨基酚非pH依赖性缓释片的处方优化

目的:设计及优化非pH依赖性缓释片处方.方法:以对乙酰氨基酚为模型药物,设计不同配比的海藻酸钠和壳聚糖为混合骨架的缓释片处方,测定各处方在 0.1 mol·L-1盐酸和pH 6.8磷酸盐缓冲液中的释放度,采用多指标同步优化筛选处方.结果:优化的乙酰氨基酚缓释片处方含壳聚糖 85 mg、海藻酸钠 135 mg 时,呈现良好的体外非pH依赖性释放特征.结论:采用海藻酸钠和壳聚糖混合骨架易制得非pH依赖性缓释片,且方法简单、成本低,具有较高的实用价值.