Development and evaluation of a novel phytosome-loaded chitosan microsphere system for curcumin delivery

In this study, we developed a novel drug delivery system, curcumin-phytosome-loaded chitosan microspheres (Cur-PS-CMs) by combining polymer- and lipid-based delivery systems. Curcumin exhibits poor water-solubility and is rapidly eliminated from the body. We aimed to use our novel delivery system to improve the bioavailability and prolong the retention time of curcumin in the body. The Cur-PS-CMs were produced by encapsulating curcumin-phytosomes (Cur-PSs) in chitosan microspheres using ionotropic gelation. The final microsphere was spherical, with a mean particle size of 23.21 ± 6.72 μm and drug loading efficiency of 2.67 ± 0.23%. Differential scanning calorimetry and Fourier transform infrared spectroscopy demonstrated that the integrity of the phytosomes was preserved within the polymeric matrix of the microspheres. The in vitro release rate of curcumin from the Cur-PS-CMs was slower than that from curcumin-loaded chitosan microspheres (Cur-CMs) in pH 1.0, 4.0, 6.8, and 7.4. Pharmacokinetic studies in rats dosed with Cur-PS-CMs showed a 1.67- and a 1.07-fold increase in absorption of curcumin compared with Cur-PSs and Cur-CMs, respectively. The half-life of curcumin orally administration of Cur-PS-CMs (3.16 h) was longer than those of Cur-PSs (1.73 h) and Cur-CMs (2.34 h). These results indicated that the new Cur-PS-CMs system combined the advantages of chitosan microspheres and phytosomes, which had better effects of promoting oral absorption and prolonging retention time of curcumin than single Cur-PSs or Cur-CMs. Therefore, the PS-CMs may be used as a sustained delivery system for lipophilic compounds with poor water-solubility and low oral bioavailability.     

Ciprofloxacin-loaded bovine serum albumin microspheres: preparation and drug-release in vitro.

Ciprofloxacin albumin microspheres were prepared by the spray drying technique, with bovine serum albumin as the natural biodegradable wall material. The spherical microspheres, flowed well, were organic solvent free and in the size range 1-5 microm. The drug release from the microspheres could be retarded by further thermal denaturation. The sustained-release microspheres were suitable for dry powder inhaled lung drug delivery systems.     

Celecoxib incorporated chitosan microspheres: in vitro and in vivo evaluation

Recently, considerable interest has been focussed on the use of biodegradable polymers for specialized applications such as controlled release of drug formulations; meanwhile, microsphere drug delivery systems using various kinds of biodegradable polymers have been studied extensively during the past two decades. In the present investigation, it was aimed to prepare microsphere formulations of celecoxib using a natural polymer, chitosan as a carrier for intra-articular administration to extend the retention of the drug in the knee joint. Microsphere formulations were evaluated in vitro for particle size, entrapment efficiency, surface morphology and in vitro drug release. For in vivo studies, (99m)Technetium- labeled glutathione was used as a radiopharmaceutical to demonstrate arthritic lesions by gamma scintigraphy. Evaluation of arthritic lesions post therapy in rats showed a significant difference (P < 0.005) in the group treated with celecoxib solution compared to the group treated with celecoxib loaded chitosan microspheres.     

Ondansetron-loaded biodegradable microspheres as a nasal sustained delivery system: In vitro/in vivo studies

The aim of this study was to prepare ondansetron-loaded biodegradable microspheres as a nasal delivery system. Microspheres were prepared with emulsification/spray-drying technique using poly(d,l-lactide) (PLA) and two different types of poly(d,l-lactide-co-glycolide) (PLGA). The effect of the type of organic solvent (dichloromethane (DCM) or a mixture of DCM and ethyl acetate) on the microsphere characteristics was also examined. The prepared microspheres were evaluated with respect to the morphological properties, particle size, zeta potential, drug loading efficiency, and in vitro drug release. The mean particle size (d(50)) of microsphere formulations was ranged from 11.67-25.54 μm, indicating suitable particle size for nasal administration. All microspheres had low drug loading efficiency in the range of 12.28-21.04%. The results indicated that particle size of microspheres were affected by both type of polymer and organic solvent, however drug loading efficiency of microspheres were affected by only the type of organic solvent used. All microspheres were negatively charged due to the polymers (PLA or PLGA) used. A prolonged in vitro drug release profile was observed for 96?h. Based on in vitro data, the selected microsphere formulation has been applied via nasal route to rats in vivo. Following nasal administration of ondansetron-loaded microsphere to rats, ondansetron plasma levels were within a range of 30-48?ng/mL during 96?h, indicating a sustained drug delivery pattern and relatively a constant plasma drug concentration level. The results suggested that biodegradable microspheres prepared with emulsification/spray-drying technique could be considered to deliver ondansetron via nasal route to obtain a prolonged release.     

Ondansetron-loaded biodegradable microspheres as a nasal sustained delivery system: In vitro/in vivo studies

The aim of this study was to prepare ondansetron-loaded biodegradable microspheres as a nasal delivery system. Microspheres were prepared with emulsification/spray-drying technique using poly(d,l-lactide) (PLA) and two different types of poly(d,l-lactide-co-glycolide) (PLGA). The effect of the type of organic solvent (dichloromethane (DCM) or a mixture of DCM and ethyl acetate) on the microsphere characteristics was also examined. The prepared microspheres were evaluated with respect to the morphological properties, particle size, zeta potential, drug loading efficiency, and in vitro drug release. The mean particle size (d₅₀) of microsphere formulations was ranged from 11.67–25.54 μm, indicating suitable particle size for nasal administration. All microspheres had low drug loading efficiency in the range of 12.28–21.04%. The results indicated that particle size of microspheres were affected by both type of polymer and organic solvent, however drug loading efficiency of microspheres were affected by only the type of organic solvent used. All microspheres were negatively charged due to the polymers (PLA or PLGA) used. A prolonged in vitro drug release profile was observed for 96?h. Based on in vitro data, the selected microsphere formulation has been applied via nasal route to rats in vivo. Following nasal administration of ondansetron-loaded microsphere to rats, ondansetron plasma levels were within a range of 30–48?ng/mL during 96?h, indicating a sustained drug delivery pattern and relatively a constant plasma drug concentration level. The results suggested that biodegradable microspheres prepared with emulsification/spray-drying technique could be considered to deliver ondansetron via nasal route to obtain a prolonged release.     

Multiparticulate System for Colon Targeted Delivery of Ondansetron

Targeted delivery of drugs to colon has the potential for local treatment of a variety of colonic diseases. The main objective of the study was to develop a multiparticulate system containing chitosan microspheres for the colon targeted delivery of ondansetron for the treatment of irritable bowel syndrome. This work combines pH-dependent solubility of eudragit S-100 polymers and microbial degradability of chitosan polymers. Chitosan microspheres containing ondansetron were prepared by emulsion cross linking method. The effect of process variables like chitosan concentration, drug-polymer ratio, emulsifier concentration and stirring speed were studied on particle size and entrapment efficiency of chitosan microspheres. In vitro drug release studies in simulated gastro intestinal fluids showed a burst drug release pattern in the initial hour necessitating microencapsulation around the chitosan microspheres. The optimized formulation was then subjected to microencapsulation with eudragit S-100 by solvent evaporation technique. The effect of different coat/core ratio on particle size, drug entrapment efficiency and in vitro drug release were studied. Formulation which contain 1:10 core/coat ratio released lesser amount of drug in the upper gastro intestinal conditions and so selected as best formulation and then subjected to in vitro drug release studies in presence of rat ceacal contents to assess biodegradability of chitosan microspheres in colon. In order to study the drug release mechanism in vitro drug release data was fitted into various kinetic models. Analysis of regression values suggested that the possible drug release mechanism was Peppas model.     

Ciprofloxacin-loaded bovine serum albumin microspheres: preparation and drug-release in vitro

Ciprofloxacin albumin microspheres were prepared by the spray drying technique, with bovine serum albumin as the natural biodegradable wall material. The spherical microspheres, flowed well, were organic solvent free and in the size range 1 ~ 5 #119 m. The drug release from the microspheres could be retarded by further thermal denaturation. The sustained-release microspheres were suitable for dry powder inhaled lung drug delivery systems.     

Celecoxib Incorporated Chitosan Microspheres: In Vitro and In Vivo Evaluation

Recently, considerable interest has been focussed on the use of biodegradable polymers for specialized applications such as controlled release of drug formulations; meanwhile, microsphere drug delivery systems using various kinds of biodegradable polymers have been studied extensively during the past two decades. In the present investigation, it was aimed to prepare microsphere formulations of celecoxib using a natural polymer, chitosan as a carrier for intra-articular administration to extend the retention of the drug in the knee joint. Microsphere formulations were evaluated in vitro for particle size, entrapment efficiency, surface morphology and in vitro drug release. For in vivo studies, ^99mTechnetium- labeled glutathione was used as a radiopharmaceutical to demonstrate arthritic lesions by gamma scintigraphy. Evaluation of arthritic lesions post therapy in rats showed a significant difference (P<0.05) in the group treated with celecoxib solution compared to the group treated with celecoxib loaded chitosan microspheres.     

Biodegradable bromocryptine mesylate microspheres prepared by a solvent evaporation technique. I: Evaluation of formulation variables on microspheres characteristics for brain delivery

The aim of this study was to formulate biodegradable microspheres containing an anti-parkinsonian agent, bromocryptine mesylate, for brain delivery. The effect of formulation parameters (e.g. polymer, emulsifying agent type and concentration) on the characteristics of the microspheres produced, the efficiency of drug encapsulation, the particle size distribution and in vitro drug release rates from the bromocryptine mesylate microspheres were investigated using a 3(2) factorial design. Bromocryptine mesylate was encapsulated into biodegradable polymers using the following three different polymers; poly(L-lactide), poly(D,L-lactide) and poly(D,L-lactide-co-glycolide). The SEM photomicrographs showed that the morphology of the microspheres greatly depended on the polymer and emulsifying agent. The results indicate that, regardless of the polymer type, increase in emulsifying agent concentration from 0.25-0.75% w/v markedly decreases the particle size of the microspheres. Determination of particle size revealed that the use of 0.75% w/v of emulsifying agent concentration and a polymer solution concentration of 10% w/v resulted in optimum particle size. In order to prepare biodegradable microspheres with high drug content and small particle size, selection of polymer concentration as well as emulsifying agent concentration is critical. Polymer type has a less pronounced effect on the percentage encapsulation efficiency and particle size of microspheres than on the t(50%). The microspheres prepared by all three polymers, at a polymer concentration of 10% w/v and an emulsifying agent concentration of 0.75% w/v with NaCMC:SO (4:1, w/v) mixture was as the optimum formulation.     

Design and Development of Multiparticulate System for Targeted Drug Delivery to Colon

A multiparticulate system combining pH-sensitive property and specific biodegradability for colon-targeted delivery of metronidazole has been investigated. Cross-linked chitosan microspheres were prepared from an emulsion system using liquid paraffin as the external phase and solution of chitosan in acetic acid as the disperse phase. The multiparticulate system was prepared by coating cross-linked chitosan microspheres exploiting Eudragit® L-100 and S-100 as pH-sensitive polymers. Morphology and surface characteristics of the formulations were determined by scanning electron microscopy. Particle size of the chitosan microspheres was determined by optical microscopy while that of coated microspheres was determined by particle size analyzer. In vitro drug-release studies were performed in conditions simulating stomach-to-colon transit in presence and absence of rat caecal contents. The size of the microspheres was small and they were efficiently microencapsulated within Eudragit® microspheres, forming a multireservoir system. By coating the microspheres with Eudragit® pH-dependant release profiles were obtained. No release was observed at acidic pH; however, when it reached the pH where Eudragit® starts solublizing there was continuous release of drug from the formulation. Further, the release of drug was found to be higher in the presence of rat caecal contents, indicating the susceptibility of chitosan matrix to colonic enzymes released from rat caecal contents.     

Biodegradable bromocryptine mesylate microspheres prepared by a solvent evaporation technique. I: Evaluation of formulation variables on microspheres characteristics for brain delivery

The aim of this study was to formulate biodegradable microspheres containing an anti-parkinsonian agent, bromocryptine mesylate, for brain delivery. The effect of formulation parameters (e.g. polymer, emulsifying agent type and concentration) on the characteristics of the microspheres produced, the efficiency of drug encapsulation, the particle size distribution and in vitro drug release rates from the bromocryptine mesylate microspheres were investigated using a 3 2 factorial design. Bromocryptine mesylate was encapsulated into biodegradable polymers using the following three different polymers; poly(L-lactide), poly(D,L-lactide) and poly(D,L-lactide-co-glycolide). The SEM photomicrographs showed that the morphology of the microspheres greatly depended on the polymer and emulsifying agent. The results indicate that, regardless of the polymer type, increase in emulsifying agent concentration from 0.25-0.75% w/v markedly decreases the particle size of the microspheres. Determination of particle size revealed that the use of 0.75% w/v of emulsifying agent concentration and a polymer solution concentration of 10% w/v resulted in optimum particle size. In order to prepare biodegradable microspheres with high drug content and small particle size, selection of polymer concentration as well as emulsifying agent concentration is critical. Polymer type has a less pronounced effect on the percentage encapsulation efficiency and particle size of microspheres than on the t 50% . The microspheres prepared by all three polymers, at a polymer concentration of 10% w/v and an emulsifying agent concentration of 0.75% w/v with NaCMC:SO (4:1, w/v) mixture was as the optimum formulation.     

Design and development of multiparticulate system for targeted drug delivery to colon

A multiparticulate system combining pH-sensitive property and specific biodegradability for colon-targeted delivery of metronidazole has been investigated. Cross-linked chitosan microspheres were prepared from an emulsion system using liquid paraffin as the external phase and solution of chitosan in acetic acid as the disperse phase. The multiparticulate system was prepared by coating cross-linked chitosan microspheres exploiting Eudragit® L-100 and S-100 as pH-sensitive polymers. Morphology and surface characteristics of the formulations were determined by scanning electron microscopy. Particle size of the chitosan microspheres was determined by optical microscopy while that of coated microspheres was determined by particle size analyzer. In vitro drug-release studies were performed in conditions simulating stomach-to-colon transit in presence and absence of rat caecal contents. The size of the microspheres was small and they were efficiently microencapsulated within Eudragit® microspheres, forming a multireservoir system. By coating the microspheres with Eudragit® pH-dependant release profiles were obtained. No release was observed at acidic pH; however, when it reached the pH where Eudragit® starts solublizing there was continuous release of drug from the formulation. Further, the release of drug was found to be higher in the presence of rat caecal contents, indicating the susceptibility of chitosan matrix to colonic enzymes released from rat caecal contents.     

A novel pH-dependent gradient-release delivery system for nitrendipine II. Investigations of the factors affecting the release behaviors of the system

Nitrendipine, a dihydropyridine calcium antagonist, was used as a poorly water-soluble model drug. To improve its dissolution rate and extend the therapeutic period in vivo as well, a novel pH-dependent gradient-release drug delivery system for nitrendipine having a solid dispersed matrix structure was developed. Four factors, i.e. the amount of excipients, the pH of the dissolution medium, the rotating speed of the paddle of the dissolution apparatus and the particle size of the microspheres, all of which affect the drug-release behavior of the pH-dependent microspheres of the system were investigated in detail. The release profiles of the pH-dependent drug delivery system under simulated gastrointestinal tract pH conditions were also investigated. The results showed that the release rate of drug from the microspheres increased on increasing the amount of respective pH-dependent polymers formulated. Due to the fact that the active drug was incorporated in pH-dependent polymers and was present in a solid dispersion state in the microspheres, the release rate of the drug from the microspheres depended on the dissolution rate of the polymers, which was mainly influenced by the pH of dissolution medium, whereas the rotating speed of the paddle and the particle size of the microspheres had only a relatively minor effect. The release behavior of the system under simulated gastrointestinal tract conditions exhibited obvious gradient-release characteristics, showing that the release rate of the active drug could be controlled efficiently before the microspheres reached the appropriate region of the gut for absorption. These findings suggest that the pH-dependent drug delivery system could be fabricated by using present microspheres.     

The design of biodegradable ofloxacin-based core-shell microspheres: influence of the formulation parameters on in vitro characterization

Ofloxacin (OFL), second-generation fluoroquinolone, is a broad-spectrum antibiotic which is active against both Gram-positive and Gram-negative bacteria. However, OFL has a short biological half life (8-9?h) and poor stability in serum and needs frequently repeated doses during the treatment. The objective of this study was to fabricate the fucospheres and chitosan microspheres containing a poorly soluble drug, OFL, and to compare the formulation parameters influencing the in vitro properties of microparticles such as size, zeta potential, encapsulation efficiency and drug release characteristics. Particle size of fucospheres and chitosan microspheres has been found to be 0.61-1.48 μm and 1.05-2.08 μm, respectively. The zeta potentials have changed between 5.6 mV and 28.0 mV for fucospheres; 22.3 mV and 42.4 mV for chitosan microspheres. The fucospheres have had higher drug encapsulation efficiency than those of chitosan microspheres. The particle size, surface charge, encapsulation efficiency and in vitro drug release from both fucospheres and chitosan microspheres have been affected by type and concentration of the polymers used. The release mechanism from most of the microsphere formulations has been fitted to Higuchi kinetic model. It can be concluded that OFL-encapsulated fucospheres can be a potential delivery system for antibiotics.     

The design of biodegradable ofloxacin-based core-shell microspheres: Influence of the formulation parameters on in vitro characterization

Ofloxacin (OFL), second-generation fluoroquinolone, is a broad-spectrum antibiotic which is active against both Gram-positive and Gram-negative bacteria. However, OFL has a short biological half life (8–9?h) and poor stability in serum and needs frequently repeated doses during the treatment. The objective of this study was to fabricate the fucospheres and chitosan microspheres containing a poorly soluble drug, OFL, and to compare the formulation parameters influencing the in vitro properties of microparticles such as size, zeta potential, encapsulation efficiency and drug release characteristics. Particle size of fucospheres and chitosan microspheres has been found to be 0.61–1.48 µm and 1.05–2.08 µm, respectively. The zeta potentials have changed between 5.6 mV and 28.0 mV for fucospheres; 22.3 mV and 42.4 mV for chitosan microspheres. The fucospheres have had higher drug encapsulation efficiency than those of chitosan microspheres. The particle size, surface charge, encapsulation efficiency and in vitro drug release from both fucospheres and chitosan microspheres have been affected by type and concentration of the polymers used. The release mechanism from most of the microsphere formulations has been fitted to Higuchi kinetic model. It can be concluded that OFL-encapsulated fucospheres can be a potential delivery system for antibiotics.     

Development and evaluation of stavudine loaded injectable polymeric particulate systems

Present research investigates the formulation of stavudine loaded biodegradable microspheres from different grades of Poly (D, L Lactide-co-glycolide) as a depot system for parenteral delivery. Prolonged release of stavudine facilitates reduction in symptoms of HIV infection and delay AIDS progression by reducing viral load to undetectable levels. Microspheres were prepared from PLGA 85:15 and PLGA 50:50 (RESOMER(?) 505H) by solvent evaporation technique with different drug/polymer ratios (1:4, 1:10, 1:20, 1:50, 1:100) and a polymer solution/vehicle ratio of 1:2. The effects of various formulation variables like polymer type and concentration, surfactant concentration and drug to polymer ratio on the characteristics of microspheres were evaluated. All thirteen formulations of microspheres were evaluated for yield, entrapment efficiency, particle size and In vitro release studies. Microspheres were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X-ray diffraction (XRD), residual solvent analysis and confocal laser scanning microscopy (CLSM). Microspheres showed excellent surface topography with uniform distribution and structural integrity of the drug. Resulting microspheres showed the maximum entrapment efficiency of 68.0 ± 1.62% and mean particle diameter below 100μ. Drug release kinetics data were obtained from various kinetic models and best explained by "Higuchi Kinetic" i.e. drug release was largely governed by diffusion through water-filled pores in the matrix. Korsmeyer-Peppas equation depicted that drug release mechanism is anomalous transport, i.e. diffusion as well as polymer relaxation. Drug release from microspheres exhibited the characteristic release pattern of a monolithic matrix system with a maximum of 80-90% drug release in 6-8 weeks demonstrating the feasibility of prolonged delivery of stavudine using biodegradable microspheres for parenteral depot system.     

Efficacy of chitosan microspheres for controlled intra-articular delivery of celecoxib in inflamed joints

The use of polymeric carriers in formulations of therapeutic drug delivery systems has gained widespread application, due to their advantage of being biodegradable and biocompatible. In this study, we aimed to prepare celecoxib-loaded chitosan microspheres for intra-articular administration and to compare the retention of the celecoxib solution and chitosan microspheres in the joint cavity. The microspheres were characterized for entrapment efficiency, particle size and surface morphology by scanning electron microscopy. In-vitro drug release studies of microspheres revealed that the microspheres are able to control the release of celecoxib over a period of 96 h. Biodistribution studies of celecoxib and chitosan microspheres were performed by radiolabelling with( 99m)Tc and injecting intraarticularly in rats. The study indicated that following intra-articular administration the distribution of the drug to the organs, like liver and spleen, is very rapid compared with that of the microspheres. Compared with the drug solution, a 10-fold increase in the concentration of the drug in the joint was observed 24 h post intra-articular injection (P < 0.005) when drug was encapsulated in microspheres.     

Chitosan microspheres in novel drug delivery systems

The main aim in the drug therapy of any disease is to attain the desired therapeutic concentration of the drug in plasma or at the site of action and maintain it for the entire duration of treatment. A drug on being used in conventional dosage forms leads to unavoidable fluctuations in the drug concentration leading to under medication or overmedication and increased frequency of dose administration as well as poor patient compliance. To minimize drug degradation and loss, to prevent harmful side effects and to increase drug bioavailability various drug delivery and drug targeting systems are currently under development. Handling the treatment of severe disease conditions has necessitated the development of innovative ideas to modify drug delivery techniques. Drug targeting means delivery of the drug-loaded system to the site of interest. Drug carrier systems include polymers, micelles, microcapsules, liposomes and lipoproteins to name some. Different polymer carriers exert different effects on drug delivery. Synthetic polymers are usually non-biocompatible, non-biodegradable and expensive. Natural polymers such as chitin and chitosan are devoid of such problems. Chitosan comes from the deacetylation of chitin, a natural biopolymer originating from crustacean shells. Chitosan is a biocompatible, biodegradable, and nontoxic natural polymer with excellent film-forming ability. Being of cationic character, chitosan is able to react with polyanions giving rise to polyelectrolyte complexes. Hence chitosan has become a promising natural polymer for the preparation of microspheres/nanospheres and microcapsules. The techniques employed to microencapsulate with chitosan include ionotropic gelation, spray drying, emulsion phase separation, simple and complex coacervation. This review focuses on the preparation, characterization of chitosan microspheres and their role in novel drug delivery systems.     

生物可降解型石杉碱甲微球的研究

目的制备能够在一个月甚至更长时间内缓释石杉碱甲的注射型生物可降解微球。方法选用端基不封口的PLA或PLGA、采用简单的O/W乳化溶剂挥发法制备微球;详细考察了微球的形态、粒径及分布、载药量和包封率;用透析法测定微球的体外药物释放曲线。结果成功地将石杉碱甲包裹入聚合物中;制得的微球表面光滑,但不同材料制得的微球内部结构不同,粒径全部小于250μm,粒径分布较窄,载药量的质量分数在4%~6.5%内,包封率的质量分数在45%-65%内,比用端基封口的聚合物制备的微球包封率高15倍以上;体外释药试验表明,载有石杉碱甲的3种微球能够在5-7周内缓释药物。结论利用生物可降解型微球缓释石杉碱甲是可行的。     

Preparation and in vitro evaluation of thiolated chitosan microparticles

The objective of this study was to prepare a microparticulate drug delivery system being based on a new thiomer, namely a chitosan 2-iminothiolane conjugate (chitosan-TBA conjugate). Due to thiol groups being immobilized on chitosan, chitosan-TBA conjugate exhibits improved mucoadhesive and permeation enhancing properties. Because of these features microparticulate drug delivery systems based on chitosan-TBA conjugate might be a promising tool for the non-invasive administration of hydrophilic macromolecular drugs. Chitosan-TBA conjugate microspheres were prepared by the emulsification/solvent evaporation method. Fluorescein-isothiocyanate labelled dextran (FITC-dextran) was chosen as a model hydrophilic drug. Microspheres have been characterized by morphological analysis, thiol group content, swelling behaviour, polymer degradation drug load determination, dissolution test and mucoadhesion studies. Results reported in this work demonstrated the possibility to obtain stable microspheres without cross-linking agents. Thiolated chitosan microspheres seem to be more stable in aqueous media with respect to unmodified chitosan. The degradability by lysozyme appears quite similar for both polymers, showing that chemical modification does not influence the biodegradable properties of chitosan. Microspheres were able to control the drug release for at least 1?h, exhibiting comparatively strong mucoadhesive properties. The chitosan-TBA conjugate microparticles remain on the mucosa in a 2.5-fold higher concentration with respect to unmodified chitosan microparticles. These data suggest that chitosan-TBA conjugate microspheres have the potential to be used as a mucoadhesive drug delivery system.