Controlled release of dexamethasone from poly(vinyl alcohol) hydrogel

This study investigated a chemically crosslinked poly(vinyl alcohol) (PVA) hydrogel controlled drug delivery system to deliver the anti-inflammatory drug dexamethasone (DEX). The PVA hydrogels, with different crosslinking densities, were characterized by swelling studies, electron scanning microscopy, viscosity, Fourier transform infrared spectroscopy (FTIR) and in vitro release assessment. Increasing crosslinking density slowed and decreased swelling and water absorption. FTIR analysis suggested DEX has possible interactions with the crosslinker and the PVA polymer. In vitro release of DEX from PVA hydrogels was sustained for 33 days and appeared to fit the Higuchi and Korsmeyer–Peppas models. This work indicates the likelihood of PVA hydrogel as a controlled drug release system for DEX for anti-inflammatory uses.     

Electrically controlled release of sulfosalicylic acid from crosslinked poly(vinyl alcohol) hydrogel

Electrically controlled drug delivery using poly(vinyl alcohol) (PVA) hydrogels as the matrix/carriers for a model drug was investigated. The drug-loaded PVA hydrogels were prepared by solution-casting using sulfosalicylic acid as the model drug and glutaraldehyde as the crosslinking agent. The average molecular weight between crosslinks, the crosslinking density, and the mesh size of the PVA hydrogels were determined from the equilibrium swelling theory as developed by Peppas and Merril, and the latter data were compared with those obtained from scanning electron microscopy. The release mechanisms and the diffusion coefficients of the hydrogels were studied using modified Franz-Diffusion cells in an acetate buffer with pH 5.5 and temperature 37 degrees C during a period of 48 h, in order to determine the effects of crosslinking ratio, electric field strength, and electrode polarity. The amounts of drug released were analyzed by UV-vis spectrophotometry. The amounts of drug released vary linearly with square root of time. The diffusion coefficients of drug-loaded PVA hydrogels decrease with increasing crosslink ratio. Moreover, the diffusion coefficients of the charged drug in the PVA hydrogels depend critically on the electric field strength between 0 and 5 V as well as on the electrode polarity. Thus, the release rate of sulfosalicylic acid can be altered and controlled precisely through electric field stimulation.     

A photo-crosslinked poly(vinyl alcohol) hydrogel growth factor release vehicle for wound healing applications

The objective of this study was to develop and evaluate a hydrogel vehicle for sustained release of growth factors for wound healing applications. Hydrogels were fabricated using ultraviolet photo-crosslinking of acrylamide-functionalized nondegradable poly(vinyl alcohol) (PVA). Protein permeability was initially assessed using trypsin inhibitor (TI), a 21 000 MW model protein drug. TI permeability was altered by changing the solids content of the gel and by adding hydrophilic PVA fillers. As the PVA content increased from 10% to 20%, protein flux decreased, with no TI permeating through 20% PVA hydrogels. Further increase in model drug release was achieved by incorporating hydrophilic PVA fillers into the hydrogel. As filler molecular weight increased, TI flux increased. The mechanism for this is most likely an alteration in protein/gel interactions and transient variations in water content. The percent protein released was also altered by varying protein loading concentration. Release studies conducted using growth factor in vehicles with hydrophilic filler showed sustained release of platelet-derived growth factor (PDGF-β,β) for up to 3 days compared with less than 24 hours in the controls. In vitro bioactivity was demonstrated by doubling of normal human dermal fibroblas numbers when exposed to growth factor-loaded vehicle compared to control. The release vehicle developed in this study uses a rapid and simple fabrication method, and protein release can be tailored by modifying solid content, incorporating biocompatible hydrophilic fillers, and varying protein loading concentration.     

Preparation and Characterization of Freeze-dried Chitosan-Poly(Ethylene Oxide) Hydrogels for Site-Specific Antibiotic Delivery in the Stomach

Purpose. The purpose of this study was to develop novel drug delivery systems with pH-sensitive swelling and drug release properties for localized antibiotic delivery in the stomach. Methods. The drug delivery systems were synthesized by crosslinking chitosan and poly(ethylene oxide) (PEO) in a blend to form semi-interpenetrating polymer network (semi-IPN). Scanning electron microscopy was used to compare the surface and bulk morphology of the freeze-dried and air-dried chitosan-PEO semi-IPN. The hydrogels were allowed to swell and release the antibiotics—amoxicillin and metronidazole—in enzyme-free simulated gastric fluid (SGF, pH 1.2) and simulated intestinal fluid (SIF, pH 7.2) at 37°C. Results. Freeze-dried chitosan-PEO semi-IPN with a porous matrix had swollen extensively as compared to the air-dried hydrogel. The swelling ratio of freeze-dried and air-dried chitosan-PEO semi-IPN after 1 h in SGF was 16.1 and 2.30, respectively. More than 65% of the entrapped amoxicillin and 59% of metronidazole were released from the freeze-dried chitosan-PEO semi-IPN after 2 h in SGF. Conclusions. The results of this study suggest that freeze-dried chitosan-PEO semi-IPN could be useful for localized delivery of antibiotics in the acidic environment of the gastric fluid.     

Hydrogels based on interpenetrating network of chitosan and polyvinyl pyrrolidone for pH-sensitive delivery of repaglinide

The aim of this study was to develop a pH-sensitive chitosan/polyvinyl pyrrolidone (PVP) based controlled drug release system for repaglinide. The hydrogels were synthesised by crosslinking chitosan and PVP blend with glutaraldehyde to form a semi-interpenetrating polymer network (semi-IPN). These semi-IPNs were studied for their content uniformity, swelling index (SI), mucoadhesion, wettability, in vitro release and their release kinetics. The hydrogels showed more than 95% loading of repaglinide. These hydrogels showed high swelling and mucoadhesion under acidic conditions. The swelling was found due to the protonation of a primary amino group on chitosan. In acidic condition chitosan was ionized, and adhesion occurred between the positively charged chitosan and the negatively charged mucus. In the physiological condition less swelling was noticed. In vitro release study revealed that formulation containing chitosan (2% w/v) and PVP (4% w/v) in the ratio of 14:6 w/w showed complete drug release after 12h. Release profile showed that all the formulations followed non-fickian diffusion mechanism (diffusion coupled with swelling). Fourier transform infrared (FTIR) spectroscopic analysis revealed proper crosslinking of polymer and formation of semi-IPN as well as presence of drug in the formulation. Differential scanning calorimetry (DSC) and powder x-ray diffraction (p-XRD) study revealed the presence of repaglinide in crystalline form in the formulations. The surface morphology of semi-IPN was studied before and after dissolution in simulated gastric fluid (SGF, pH 1.2) which indicated generation of open channel-like structure in hydrogel after dissolution. The results of study suggest that semi-IPNs of chitosan/PVP are potent candidates for delivery of repaglinide in acidic environment.     

Preparation and characterization of superporous hydrogels as gastroretentive drug delivery system for rosiglitazone maleate

BACKGROUND AND THE PURPOSE OF THE STUDY: Many drugs which have narrow therapeutic window and are absorbed mainly in stomach have been developed as gastroretentive delivery system. Rosiglitazone maleate, an anti-diabetic, is highly unstable at basic pH and is extensively absorbed from the stomach. Hence there is a need to develop a gastroretentive system. In this study a superporous hydrogel was developed as a gastroretentive drug delivery system. METHODS: Chitosan/poly(vinyl alcohol) interpenetrating polymer network type superporous hydrogels were prepared using a gas foaming method employing glyoxal as the crosslinking agent for Rosiglitazone maleate. Sodium bicarbonate was applied as a foaming agent to introduce the porous structure. Swelling behaviors of superporous hydrogel in acidic solution were studied to investigate their applications for gastric retention device. The optimum preparation condition of superporous hydrogels was obtained from the gelation kinetics. FT-IR, scanning electron microscopy, porosity and swelling ratio studies were used to characterize these polymers. In vitro drug release studies were also carried out. RESULTS: The introduction of a small amount of Poly(Vinyl Alcohol) enhanced the mechanical strength but slightly reduced the swelling ratio. The prepared superporous hydrogels were highly sensitive to pH of swelling media, and showed reversible swelling and de-swelling behaviors maintaining their mechanical stability. The degradation kinetics in simulated gastric fluid showed that it had biodegradability. Swelling was dependent on the amount of chitosan and crosslinker. The drug release from superporous hydrogels was sustained for 6 hrs. MAJOR CONCLUSION: The studies showed that chitosan-based superporous hydrogels could be used as a gastroretentive drug delivery system for rosiglitazone maleate in view of their swelling and prolonged drug release characteristics in acidic pH.     

Drug release from the enzyme-degradable and pH-sensitive hydrogel composed of glycidyl methacrylate dextran and poly(acrylic acid)

Hydrogels composed of glycidyl methacrylate dextran (GMD) and poly(acrylic acid, PAA) were prepared by UV irradiation method for colon-specific drug delivery. GMD was synthesized by coupling of glycidyl methacrylate to dextran in the presence of 4-(N,N-dimethylamino)pyridine. GMD was photo-polymerized by ammonium peroxydisulfate as initiating system in phosphate-buffered solution (0.1 M, pH 7.4). And then, acrylic acid monomer was added and subsequently heat-polymerized by 2,2'-azobisisobutyronitrile as an initiator. The hydrogels exhibited high swelling ratio (about 20) at 37 degrees C, and showed a pH-dependent swelling behavior. In addition, the swelling ratio of the hydrogel was remarkably enhanced to about 45 times in the presence of dextranase at pH 7.4. The swelling-deswelling behavior proceeded reversibly for the GMD/PAA hydrogels between pH 2 and pH 7.4. Release of 5-aminosalicylic acid from the GMD/PAA hydrogels was evaluated in simulated gastrointestinal pH fluids in the absence or presence of dextranase. We concluded that the hydrogels prepared could be used as a dual-sensitive drug carrier for sequential release in gastrointestinal tract.     

Network structure and macromolecular drug release from poly(vinyl alcohol) hydrogels fabricated via two crosslinking strategies

Injectable hydrogels have potential biomedical applications ranging from tissue fillers to drug delivery vehicles. This study focussed on evaluating the structure of poly(vinyl alcohol) (PVA) hydrogels of variable solid content and high molecular weight model drug release from the networks formed via either conventional photo-polymerization compared with chemical initiation of polymerization using an oxidation-reduction (redox) reaction. Swelling behaviour was characterised in water to assess the structural properties. Model drugs, FITC-Dextran, 20 kDa (FD20) and 4 kDa (FD4) were loaded in the hydrogels prior to curing and drug release studies conducted. Redox-cured hydrogels were more swollen than UV-cured systems, lost approximately 20% of their polymer mass compared to only 5% from UV-cured hydrogels and subsequently exhibited networks of larger mesh sizes. Also, networks of variable solid contents showed different structural properties with systems of higher polymer concentration exhibiting a smaller mesh size. The difference in structural properties of the networks affected release of FD20, being faster in redox-cured than UV-cured hydrogels, and slower from systems of higher solid content. Release of FD4 was faster than FD20 from networks of same solid content. This study suggested that PVA hydrogels can be cured by redox-initiation to function as a controlled delivery system for macromolecular drugs.     

Synthesis of chemically cross-linked polyvinyl alcohol-co-poly (methacrylic acid) hydrogels by copolymerization; a potential graft-polymeric carrier for oral delivery of 5-fluorouracil

Background of the Study

The propose of the present work was to develop chemically cross-linked polyvinyl alcohol-co-poly(methacrylic acid) hydrogel (PVA-MAA hydrogel) for pH responsive delivery of 5-Fluorouracil (5-FU).

Methods

PVA based hydrogels were prepared by free radical copolymerization. PVA has been cross-linked chemically with monomer (methacrylic acid) in aqueous medium, cross-linking agent was ethylene glycol di-methacrylate (EGDMA) and benzoyl peroxide was added as reaction initiator. 5-FU was loaded as model drug. FTIR, XRD, TGA and DSC were performed for characterization of copolymer. Surface morphology was studied by SEM. pH sensitive properties were evaluated by swelling dynamics and equilibrium swelling ratio at low and higher pH.

Results

FTIR, XRD, TGA and DSC studies confirmed the formation of new copolymer. Formulations with higher MAA contents showed maximum swelling at 7.4 pH. High drug loading and higher drug release has been observed at pH 7.4.

Conclusions

The current study concludes that a stable copolymeric network of PVA was developed with MAA. The prepared hydrogels were highly pH responsive. This polymeric network could be a potential delivery system for colon targeting of 5-FU in colorectal cancers.     

Design and evaluation of buccoadhesive metoclopramide hydrogels composed of poly(acrylic acid) crosslinked with sucrose

We evaluated the effects of polyacrylic acid (PAA) molecular weight and crosslinking agent (sucrose) concentration on swelling and drug (metoclopramide) release characteristics of PAA (Carbopol) hydrogels. Both factors, and the interactions between them, were found to have significant effects on both hydrogel swelling and drug release. In particular, increased sucrose concentration led to reduced swelling and reduced drug release efficiency.     

Effects of Molecular Weight and Loading on Matrix Metalloproteinase-2 Mediated Release from Poly(Ethylene Glycol) Diacrylate Hydrogels

Herein, we report on continued efforts to understand an implantable poly(ethylene glycol) diacrylate (PEGDA) hydrogel drug delivery system that responds to extracellular enzymes, in particular matrix metalloproteinase-2 (MMP-2) to provide controlled drug delivery. By attaching peptide as pendant groups on the hydrogel backbone, drug release occurs at an accelerated rate in the presence of active protease. We investigated MMP-2 entry and optimized parameters of the drug delivery system. Mesh size for different PEGDA molecular weight macromers was measured with PEGDA 3,400 hydrogels having a mesh size smaller than the dimensions of MMP-2 and PEGDA 10,000 and PEGDA 20,000 hydrogels having mesh sizes larger than MMP-2. Purified MMP-2 increased release of peptide fragment compared to buffer at several loading concentrations. Cell-stimulated release was demonstrated using U-87 MG cells embedded in collagen. GM6001, an MMP inhibitor, diminished release and altered the identity of the released peptide fragment. The increase in ratio of release from PEGDA 10,000 and PEGDA 20,000 hydrogels compared to PEGDA 3,400 hydrogels suggests MMP-2 enters the hydrogel. PEGDA molecular weight of 10,000 and 15 % (w/V) were the optimal conditions for release and handling. The use of protease-triggered drug delivery has great advantage particularly with the control of protease penetration as a parameter for controlling rate of release.     

Evaluation of poly(2-hydroxyethyl methacrylate) gels as drug delivery systems at different pH values

Studies of dynamic and equilibrium swelling, structural characterisation and solute transport in swollen poly(2-hydroxyethyl methacrylate) gels (pHEMA) cross-linked with tripropyleneglycol diacrylate (TPGDA) were done for a wide range of TPGDA concentrations. The influence of the pH on these pHEMA properties was evaluated. In swelling studies it was found that in changing the pH from 6.5 to 12.0, a large increase in swelling occurred, from approximately 48 to 55%, for the lowest concentration of TPGDA (1 mol%), and from 40 to 80% for the highest concentration (10 mol%). Fourier transform infrared (FTIR) and differential scanning calorimetry (DSC) measurements were made after the equilibrium swelling of the gels at different pH values, to explain these results. The advantage of using these gels as controlled drug delivery systems is illustrated using salicylic acid (SA) as a model drug. The loading and the release of the SA were made at different pH values and the results obtained showed that it is possible to modulate the hydrogel performance by controlling an external factor, the pH at which the drug loading and release were performed.     

Silicone microspheres for pH-controlled gastrointestinal drug delivery

Silicone microspheres containing pH-sensitive hydrogels are prepared, characterized and evaluated for their potential pH-controlled gastrointestinal (GI) drug delivery. The pH-sensitive hydrogels are semi-interpenetrating polymer networks (semi-IPN(s)) made of varying proportions of poly(methacrylic acid-co-methylmethacrylate) (Eudragit (EUD) L100 or EUD S100) and crosslinked polyethylene glycol 8000 (P8000C). Up to 35 wt% hydrogel particles of mean volume diameters from 89 to 123 microm, medicated with 15 wt% prednisolone (PDN), are encapsulated, with 100% efficiency, into morphologically acceptable silicone microspheres in the 500-1000 microm size range, by a modified emulsion vulcanization method. Microspheres are eluted for 9 h with isotonic fluids at pH values increasing from 1.2 to 7.4, to simulate transit across the GI regions. PDN release depends on dissolution medium pH and on hydrogel composition, which determines hydrogel pH-sensitivity. With the P8000C-EUD L100 (1:2) semi-IPN, the release shows a marked peak at pH 6.8. The P8000C-EUD S100 (1:2) semi-IPN causes a gastroprotection and an almost uniform distribution of released drug between media at pH 6.8 and 7.4. With the P8000C-EUD S100 (1:1) semi-IPN, the dose fraction released to gastric fluid increases to match the values for the media at pH 6.8 and 7.4. With the pH-insensitive, highly swelling, P8000C, the largest dose fraction is released to the gastric medium and release is of Fickian type. With semi-IPNs, release depends weakly on the buffer molarity of the dissolution medium, a reduction from 0.13 to 0.032 of which renders the release rate to the media at pH 6.8 and 7. 4 more uniform.Copyright     

Controlled release of terbinafine hydrochloride from pH sensitive poly(acrylamide/maleic acid) hydrogels

Adsorption and controlled release of terbinafine hydrochloride (TER-HCl) to and from pH sensitive poly(acrylamide/maleic acid) (P(AAm/MA)) hydrogels were investigated. P(AAm/MA) hydrogels were prepared by irradiating the ternary mixtures of AAm/MA/and water by gamma-rays at ambient temperature. Antifungal drug, TER-HCl containing hydrogels, at different drug to polymer ratios, was prepared by direct adsorption method. The influence of MA content in the gel on the adsorption capacities of hydrogel and the effect of pH on the releasing behavior of TER-HCl from gel matrix were investigated. Terbinafine adsorption capacity of hydrogels are found to increase from 2 to 38 mg TER-HCl per g dry gel with increasing amount of MA in the gel system. In vitro drug release studies in different buffer solutions show that the basic parameters affecting the drug release behavior of hydrogel are the pH of the solution and MA content of hydrogel.     

Physical characterisation and component release of poly(vinyl alcohol)-tetrahydroxyborate hydrogels and their applicability as potential topical drug delivery systems

Poly(vinyl alcohol)-tetrahydroxyborate (PVA-THB) hydrogels are dilatant formulations with potential for topical wound management. To support this contention, the physical properties, rheological behaviour and component release of candidate formulations were investigated. Oscillatory rheometry and texture profile analysis were used at room temperature and 37 °C. Results showed that it was possible to control the rheological and textural properties by altering component concentration and modifying the type of PVA polymer used. Hydrogels made using PVA grades with higher degrees of hydrolysis displayed favourable characteristics from a wound healing perspective. In vitro release of borate and PVA were assessed in order to evaluate potential clinical dosing of free species originating from the hydrogel structure. Component diffusion was influenced by both concentration and molecular weight, where relevant, with up to 5% free PVA cumulative release observed after 30 min. The results of this study demonstrated the importance of poly(vinyl alcohol) selection for ensuring appropriate gel formation in PVA-THB hydrogels. The benefits of higher degrees of hydrolysis, in particular, included lower excipient release and reduced bioadhesion. The unique physical characteristics of these hydrogels make them an appealing delivery vehicle for chronic and acute wound management purposes.     

Preparation of a novel freeze thawed poly(vinyl alcohol) composite hydrogel for drug delivery applications.

We describe a drug delivery system based on a physically cross-linked poly(vinyl alcohol) (PVA) hydrogel for the release of Theophylline (TH). A composite was created by freezing an aqueous solution of PVA/NaOH onto a PVA/poly(acrylic acid) substrate. This formed a strong interface and demonstrated greater physical strength than the hydrogel alone. Such systems have potential for a variety of localised controlled drug delivery applications, for example, as coatings for implantable devices. Importantly, the results suggest that a versatile synthetic platform is possible that may provide different functional materials or combination of such. The resultant samples were characterised using optical microscopy, modulated differential scanning calorimetry (MDSC) and dissolution testing. The microstructure of the gels was examined using micro-thermal analysis (microTA) which is a combination of atomic force microscopy and thermal analysis. TH was found to have an effect on the crystalline structure and dissolution showed a Fickian release, suggesting that swelling and crystallinity were the controlling mechanisms.     

Albumin release from biodegradable hydrogels composed of dextran and poly(ethylene glycol) macromer

Biodegradable hydrogels based on glycidyl methacrylate dextran (GMD) and dimethacrylate poly(ethylene glycol) (DMP) were proposed for colon-specific drug delivery. GMD was synthesized by coupling of glycidyl methacrylate with dextran in the presence of 4-(N,N-dimethyl-amino)pyridine (DMAP) using dimethylsulfoxide as a solvent. Methacrylate-terminated poly (ethylene glycol) (PEG) macromer was prepared by the reaction of PEG with methacryloyl chloride. GMD/DMP hydrogels were prepared by radical polymerization of phosphate buffer solution (0.1M, pH 7.4) of GMD and DMP, using ammonium peroxydisulfate (APS) and UV as initiating system. The synthetic GMD, DMP, and GMD/DMP hydrogels were characterized by fourier transform infrared (FT-IR) spectroscopy. The FITC-albumin loaded hydrogels were prepared by adding FITC-albumin solution before UV irradiation. Swelling capacity of GMD/DMP hydrogels was controlled not only by molecular weight of dextran, but also by incorporation ratio of DMP Degradation of the hydrogels has been studied in vitro with dextranase. FITC-albumin release from the GMD/DMP hydrogels was affected by molecular weight of dextran and the presence of dextranase in the release medium.     

Release characteristics of diclofenac sodium from poly(vinyl alcohol)/sodium alginate and poly(vinyl alcohol)-grafted-poly(acrylamide)/sodium alginate blend beads.

In this study, acrylamide (AAm) was grafted onto poly(vinyl alcohol) (PVA) with UV radiation at ambient temperature. The graft copolymer (PVA-g-PAAm) was characterized by using Fourier transform infrared spectroscopy (FTIR), elemental analysis and differential scanning calorimetry (DSC). Polymeric blend beads of PVA-g-PAAm and PVA with sodium alginate (NaAlg) were prepared by cross-linking with glutaraldehyde (GA) and used to deliver a model anti-inflammatory drug, diclofenac sodium (DS). Preparation condition of the beads was optimized by considering the percentage entrapment efficiency, particle size, swelling capacity of beads and their release data. Effects of variables such as PVA/NaAlg ratio, acrylamide content, exposure time to GA and drug/polymer ratio on the release of DS were discussed at three different pH values (1.2, 6.8, 7.4). It was observed that, DS release from the beads decreased with increasing PVA/NaAlg (m/m) ratio, drug/polymer ratio (d/p) and extent of cross-linking. However, DS release increased with increasing acrylamide content of the PVA-g-PAAm polymer. The highest DS release was obtained to be 92% for 1/1 PVA-g-PAAm/NaAlg ratio beads. It was also observed from release results that DS release from the beads through the external medium is much higher at high pH (6.8 and 7.4) than that at low pH (1.2). The drug release from the beads mostly followed Case II transport.     

Controlled release of lipase from Candida rugosa loaded into hydrogels of N-isopropylacrylamide and itaconic acid

The series of poly(N-isopropylacrylamide-co-itaconic acid) hydrogels, with lipase from Candida rugosa as a model protein, were synthesized by free radical copolymerization. The composition of hydrogels was varied by monomers ratio, crosslinking agent concentration and amounts of lipase, which was loaded by in situ polymerization. All samples were characterized regarding morphology. The investigation of hydrogel swelling properties revealed their pH and temperature sensitive character. Protein loading efficiency, release profiles and the specific activity yield of the released lipase were also investigated as a function of hydrogel composition, protein content and pH, at the physiological temperature of 37°C. Copolymers of N-isopropylacrylamide and itaconic acid presented high lipase loading efficiency. Another very important feature of these copolymers was that the protein release kinetic strongly depended on the pH value of the medium. The diffusion exponents values around 1 denoted that these hydrogel compositions could be adjusted to follow near zero-order kinetics. Namely, hydrogel formulations released low amounts of lipase at pH 2.20, but much higher released protein quantities were observed at pH 6.80 enabling these copolymers to be attractive candidates as site specific protein oral drug delivery systems.     

Water state characterization, swelling behavior, thermal and mechanical properties of chitosan based networks

Two kinds of chitosan-based hydrogels, a crosslinked chitosan reference gel and a chitosan–poly(ethylene oxide) semi-interpenetrating network (semi-IPN), with potential pH-sensitive swelling and drug delivery properties are characterized. Swelling studies were performed on the two kinds of hydrogels by differential scanning calorimetry (DSC) at pH 1.2 and by the gravimetric method at pH 1.2 and pH 7.2. Both methods lead to similar results. If pH-dependent swelling properties were observed with both hydrogels, they were however improved for the semi-IPN. The amount of bound water in the xerogels could be determined from DSC measurements and a thermogravimetric analysis. The results obtained by both techniques were in good agreement and indicated that the semi-IPN contained more bound water than the reference gel probably due to the presence of the hydrophilic poly(ethylene oxide) chains. Young modulus of the swollen hydrogels was determined by indentation analysis. The semi-IPN displayed improved mechanical properties compared to the reference gel.