Biomechanical analysis of dual versus lateral locked plating in elderly bicondylar tibial plateau fractures: Does medial comminution matter?

ObjectiveTo assess dual plating versus lateral locked plate fixation of bicondylar tibial plateau fractures in an elderly cadaveric model with and without medial bone lossParticipants10 pairs of elderly (range 78–93 years of age) fresh frozen tibias.InterventionBicondylar tibial plateau fractures were created reproducing AO/OTA 41 C1 (without medial bone loss) and C2 fractures (with medial bone loss). Cadavers were randomized to 4 different groups. Groups 1 and 2 were 41 C1 fractures and fixated with either dual or lateral plating, respectively. Groups 3 and 4 were fixated in a similar fashion with medial metaphyseal bone loss (41 C2 fracture) with dual plating Group 3 and lateral plating group 4. Lateral plating consisted of a 3.5 mm 5-hole lateral plate (ALPS, ZimmerBiomet) with 6 bicortical locking screws proximally and two diaphyseal screws. Dual plating groups underwent lateral plating and additional 3.5 mm 5-hole posteromedial 1/3 tubular plate (ZimmerBiomet) placed at the apex of the fracture with two shaft screws and one unicortical screw proximally. Specimens were tested in a Mechanical Testing System (MTS) machine loading both condyles.Outcome measurementsSpecimens were loaded to 300 N and coronal alignment obtained. Specimens were then cycled from 100 N to 700 N for 5000 cycles at 2 Hz. Average axial displacement, maximal displacement, average force and coronal alignment after 5000 cycles were recorded. Lastly, force to failure was recorded at 100 N/sec.ResultsMean axial displacement was 4.21 mm ranging from 3.12 mm in group 1 to 5.92 mm in group 4 (P = 0.51). Failure force averaged 3340 N ranging from 4342 N in group 1 to 2433 N in group 4 (P = 0.36). Maximal displacement ranged from 3.69 mm in group 1 to 7.37 mm in group 4 (P = 0.21). Change in coronal alignment ranged from 0.98° in group 1 to 1.97° in group 4 (P = 0.45). No statistically significant difference was noted between all four groups for all data points.ConclusionThe results of this study demonstrate that a lateral locked plate may offer an alternative means of fixation in AO/OTA 41 C1 and C2 fractures.     

Biomechanical comparison of fixation of type-I fractures of the lateral tibial plateau. Is the antiglide screw effective?

Type-I fractures of the lateral tibial plateau were simulated by osteotomy in 18 pairs of unembalmed cadaver tibiae. One fracture of each pair was fixed with two lag screws whereas the contralateral site was stabilised with three lag screws, or two lag screws plus an antiglide screw. The lateral plateau was displaced downwards using a servohydraulic materials testing machine and the resulting force and articular surface gap were recorded. Yield load was defined as the maximum load needed to create a 2.0 mm articular offset at the fracture line. The yield loads of the three-lag-screw (307 +/- 240 N) and antiglide constructs (342 +/- 249 N) were not significantly different from their two-screw control constructs (231 +/- 227 and 289 +/- 245 N, respectively). We concluded that adding an antiglide screw or a third lag screw did not provide any biomechanical advantage in stabilising these fractures.     

What is the risk of stress risers for interprosthetic fractures of the femur? A biomechanical analysis

Purpose

Due to increasing life expectancy we see a rising number of joint replacements. Along with the proximal prosthesis in the femur, more and more people have a second implant on the distal ipsilateral side. This might be a retrograde nail or a locking plate to treat distal femur fractures or a constrained knee prosthesis in the case of severe arthrosis. All these constructs can lead to fractures between the implants. The goal of this study was to evaluate the risk of stress risers for interprosthetic fractures of the femur.

Methods

Thirty human cadaveric femurs were divided into five groups: (1) femurs with a prosthesis on the proximal side only, (2) hip prosthesis on the proximal end and a distal femur nail, (3) femurs with both a hip prosthesis and a constrained knee prosthesis, (4) femurs with a hip prosthesis on the proximal side and a 4.5-mm distal femur locking plate; the locking plate was 230 mm in length, with ten holes in the shaft, and (5) femurs with a proximal hip prosthesis and a 4.5-mm distal femur locking plate; the locking plate was 342 mm in length, with 16 holes in the shaft.

Results

Femurs with a hip prosthesis and knee prosthesis showed significantly higher required fracture force compared to femurs with a hip prosthesis and a distal retrograde nail. Femurs with a distal locking plate of either length showed a higher required fracture force than those with the retrograde nail.

Conclusions

The highest risk for a fracture in the femur with an existing hip prosthesis comes with a retrograde nail. A distal locking plate for the treatment of supracondylar fractures leads to a higher required fracture force. The implantation of a constrained knee prosthesis that is not loosened on the ipsilateral side does not increase the risk for a fracture.     

A biomechanical enigma: why are tibial fractures not more frequent in the elderly?

Epidemiology revealed that diaphyseal fractures of the tibia affect young people, particularly young men; no increase was noticed for the elderly. This indicates that osteoporosis does not lead to increased bone fragility. Obviously, this is a biomechanical enigma. Torque measurements were carried out on human cadaveric tibiae and revealed a great correlation between the polar moment of inertia of the cortical bone at the tibial isthmus and the ultimate torque at failure (r = 0.83) and a lesser correlation between the cross-sectional density at the isthmus and the torque at failure (r = 0.57). Therefore, the size is more important than the degree of osteoporosis. We can speculate that endosteal resorption due to osteoporosis is compensated for by periosteal apposition and therefore does not lead to bone weakness.     

Does a staged treatment of high energy tibial plateau fractures affect functional results and bony union? A case series

Purpose: Tibial plateau fracture (TPF) is a devastating injury as it shatters lower articular surface of the largest joint. Apart from bony injury, TPF can lead to great soft tissue envelope compromise which affects the treatment plan and outcome. In the present study, clinical results were assessed in cases of high energy TPFs treated in staged manner. Methods: Twenty-three (20 males and 3 females) patients of high energy communited TPFs (Schatzker type V and VI) were consecutively treated.1 All the patient had compromise of overlying skin conditions. They were all successively scheduled for staged treatment plan which comprised of application of bridging knee external fixator on the first day of admission and definitive internal fixation after skin and soft tissue overlying the fracture were healed. Schatzker type I, II, III and IV were excluded from the study. Primary survey was done and patient who had head injury, chest and abdominal injury, pelvic injury and contralateral limb injury and open fractures were excluded from the study. The patients were also evaluated in terms of wound complications, axial and rotary alignment of limb, fixation failure, articular congruity and range of motion of the knees and post injury employment. Statistical analysis was done using SPSS software. Results: Maximum follow-up period was 13 months. All the fractures were united at final follow-up. Clinical evaluation was done with the Tegner Lysholm knee scoring scale.2 Excellent results were found in 78% cases and good and fair results in 22% cases. There was significant correlation between range of motion and the Tegner Lysholm knee score (p < 0.001, Pearson correlation coefficient = 0.741). The correlation between the score and the radiographical union duration was significant (p = 0.006, Pearson correlation coefficient = 0.554). Conclusion: A staged treatment plan allows healing of soft tissue envelope, with avoidance of dreadful complications such as compartment syndrome and chronic infection. In addition, a staged treatment strategy does not hamper the fracture reduction, bony union and the functional results.     

Updated Three-Column Concept in surgical treatment for tibial plateau fractures – A prospective cohort study of 287 patients

PurposeThis study introduces an updated Three-Column Concept for the classification and treatment of complex tibial plateau fractures. A combined preoperative assessment of fracture morphology and injury mechanism is utilized to determine surgical approach, implant placement and fixation sequence. The effectiveness of this updated concept is demonstrated through evaluation of both clinical and radiographic outcome measures.Patients and methodsFrom 2008 to 2012, 355 tibial plateau fractures were treated using the updated Three-Column Concept. Standard radiographic and computed tomography imaging are used to systematically assess and classify fracture patterns as follows: (1) identify column(s) injured and locate associated articular depression or comminution, (2) determine injury mechanism including varus/valgus and flexion/extension forces, and (3) determine surgical approach(es) as well as the location and function of applied fixation. Quality and maintenance of reduction and alignment, fracture healing, complications, and functional outcomes were assessed.Results287 treated fractures were followed up for a mean period of 44.5 months (range: 22–96). The mean time to radiographic bony union and full weight-bearing was 13.5 weeks (range: 10–28) and 14.8 weeks (range: 10–26) respectively. The average functional Knee Society Score was 93.0 (range: 80–95). The average range of motion of the affected knees was 1.5–121.5°. No significant difference was found in knee alignment between immediate and 18-month post-operative measurements. Additionally, no significant difference was found in functional scores and range of motion between one, two and three-column fracture groups. Twelve patients suffered superficial infection, one had limited skin necrosis and two had wound dehiscence, that healed with nonoperative management. Intraoperative vascular injury occurred in two patients. Fixation of failure was not observed in any of the fractures treated.ConclusionAn updated Three-Column Concept assessing fracture morphology and injury mechanism in tandem can be used to guide surgical treatment of tibial plateau fractures. Limited results demonstrate successful application of biologically friendly fixation constructs while avoiding fixation failure and associated complications of both simple and complex tibial plateau fractures.Level of evidenceLevel II, prospective cohort study.     

Modern treatment of tibial shaft fractures: Is there a role today for closed treatment?

PurposeThe decision to attempt closed treatment on tibial shaft fractures can be challenging. At our institution, we attempt treatment of nearly all closed, isolated tibial shaft fractures. The purpose of this study was to report the results of 10 years of experience to develop a tool to identify patients for whom non-operative treatment of tibial shaft fractures may be a viable optionMethodThis was a retrospective review of patients with tibial shaft fracture seen at a level 1 trauma center over 10 years. Patients with closed, isolated injuries underwent sedation, closed reduction, long-leg casting, and outpatient follow-up. Patients were converted to surgery for inability to obtain or maintain acceptable alignment or patient intolerance. Radiographic characteristics and patient demographics were extracted. Logistic regression analysis was used to develop a model to predict which patient and injury characteristics determined success of nonoperative treatment.Results334 patients were identified with isolated, closed tibial shaft fractures, who were reduced and treated in a long leg cast. 234 patients (70%) converted to surgical treatment due to inability to maintain alignment, patient intolerance, and nonunion. In a regression model, coronal/sagittal translation, sagittal angulation, fracture morphology, and smoking status were shown to be significant predictors of success of nonoperative treatment (p < 0.05). We developed a Tibial Operative Outcome Likelihood (TOOL) score designed to help predict success or failure of closed treatment. The TOOL score can be used to identify a subsegment of patients with injuries amenable to closed treatment (38% of injuries) with a nonoperative success rate over 60%.ConclusionNon-operative treatment of tibial shaft fractures is feasible, although there is a relatively high conversion rate to operative treatment. However, it is possible to use injury characteristics to identify a cohort of patients with a higher chance of success with closed treatment, which is potentially useful in a resource-constrained setting or for patients who wish to avoid surgery.Level of EvidencePrognostic Level 3     

A prospective, randomized, single-blind trial of 5-mm versus 3-mm ports for laparoscopic cholecystectomy: is smaller better?

Background

Single-incision laparoscopic cholecystectomy (SILC) is said to provide improved cosmesis with a reduction in postoperative pain, but SILC involves a change in operative technique. A single-blind, randomized controlled trial compared cosmetic outcomes and postoperative pain between 3- and 5-mm ports used for laparoscopic cholecystectomy (LC).

Methods

For this study, 80 patients with symptomatic gallstones were recruited from a single center and randomized to a LC using either a 5-mm port and three 3-mm ports (group A) or a 10-mm port and three 5-mm ports (group B). Operative details; pain scores at 1 h, 6 h, and 1 week; and analgesia required during the first week were collected. Cosmetic outcome was assessed at 6 months using a validated questionnaire.

Results

For each group, 40 patients were recruited. The two groups were well matched except for sex. Group A had 11 males, and Group B had 4 males. The mean operative time was 49 ± 12 min (range, 24–120 min) in the 3-mm group versus 46 ± 19 min (range, 21–124 min) in the control group (p = 0.40). The two groups did not differ statistically in the day case rate. The pain scores in Group A were 2.5 ± 2.1 at 1 h, 3.2 ± 2.2 at 6 h, and 0.8 ± 2.2 at 1 week versus 4.2 ± 2.9 at 1 h, 3.3 ± 2.4 at 6 h, and 2.1 ± 2.4 at 1 week in Group B (p = 0.003, 0.63, and 0.002, respectively). No difference in the analgesia consumption was observed during the first postoperative week. The patients in Group A had significantly better cosmetic outcome scores at 6 months.

Conclusion

The use of 3-mm ports is technically feasible in patients undergoing LC for gallstones. The operating times are comparable with those for conventional LC, whereas the pain scores are reduced, and the cosmetic outcome is better.     

Is external fixation needed for the treatment of tibial fractures with acute compartment syndrome?

Acute compartment syndrome (ACS) after tibial fracture carries a risk of various complications, including infection, delayed union, nonunion, nerve damage, and poor prognosis. For the treatment of fractures with ACS, fasciotomy is conducted, and the method to stabilise the fracture has to be considered. Thirty-five patients who underwent surgery for ACS with tibial shaft fractures were evaluated, and the results of initial internal fixation (Group I, 20 patients) and initial external fixation (Group II, 15 patients) were analysed. The mean age was 41 years. Five patients needed additional surgery for bone union. Complications occurred in 4 cases, but no deep infection was reported. The time to bone union, the need for additional surgery, and the incidence of complications in Group I and Group II were not statistically different. For the treatment of ACS with tibial fracture, immediate internal fixation and changing from external fixation to internal fixation did not affect the clinical course.     

An evaluation of supracondylar humerus fractures: is there a correlation between postponing treatment and the need for open surgical intervention?

Purpose

The goal of this study was to evaluate the treatment and recovery of patients treated for Gartland type III supracondylar humerus fractures in order to determine if postponing treatment leads to a higher rate of open surgical treatment or complications.

Methods

A retrospective study was conducted examining the medical records of children with Gartland type III supracondylar humerus fractures at our institution for a two-year period. The patients included in the study were treated with closed reduction and percutaneous pinning (CRPP) or open reduction and internal fixation (ORIF).

Results

After exclusions, 134 patients were included in the study, with an average age of 5.6 years. The patients were grouped according to whether their treatment was postponed (39.6 %) or immediate (60.4 %). The majority of all patients were treated using CRPP: 46 (86.8 %) of the postponed patients and 75 (92.6 %) of the immediate patients. Very few postsurgical complications occurred in the patients; there was only one (1.6 %) case of iatrogenic nerve injury in a postponed patient as well as four (3.8 %) cases of loss of carrying angle: one (2.3 %) in postponed patients and three (4.8 %) in immediate patients.

Conclusions

Postponing treatment of type III supracondylar humerus fractures in children did not lead to an increase in open surgical treatment; nor did it lead to an increase in complications.     

A systematic literature review of tibial plateau fractures: What classifications are used and how reliable and useful are they?

IntroductionClassification systems such as the Schatzker and AO/OTA have been proposed for standardised assessment of tibial plateau fractures and to guide clinical decision making. However, there has been no comprehensive literature review of all classification systems for tibial plateau fractures, including assessment of their reliability. The aim of this systematic review was to identify and appraise previously established classification systems for tibial plateau fractures and determine their reliability for fracture classification.MethodsSix databases were searched from inception until October 2016. Classification systems for tibial plateau fractures were identified. No restriction was placed on imaging modality (plain film X-ray, CT, MRI). Data synthesis was performed to identify common features of the systems, their prevalence within the literature and studies of intra and inter-rater reliability of fracture classification using Kappa coefficient (κ).ResultsThirty-eight classification systems were identified, five of which were a sub-classification of a single fracture type from a previous tool. The Schatzker and AO/OTA classification systems were the most commonly reported. Of the tools identified only five have been tested for inter and intra-observer reliability (Schatzker, AO/OTA, Duparc, Hohl and Luo). Reliability of more simplistic classification systems, such as that by Luo et al. (three-column) was typically high (intra-κ = 0.67–0.81, inter-κ = 0.71–0.87), but with the disadvantage of providing less information on fracture patterns and morphology. Intra and inter-observer reliability using plain film X-ray was frequently moderate (κ = 0.40–0.60), with 2D and 3D CT typically improving reliability of classification. Only 11 of the 32 complete classification systems identified association of fracture classification with clinical outcome.DiscussionFrequently used systems for classification of tibial plateau fractures display moderate intra and inter-observer reliability. More sophisticated imaging modalities such as 2D and 3D CT typically improve reliability estimates. Using fracture classification based on imaging findings to predict clinical outcome was not a commonly reported goal of newly developed systems. More detailed assessment of fracture patterns and morphology, in conjunction with information on surgical fixation, may be desirable for predicting outcomes and to guide clinical decision making.     

Does the identity of the bacteria matter in post-Kasai cholangitis? A comparison between simple and intractable cholangitis

Purpose

This study compared the bacteriology and clinical outcomes between simple (SC) and intractable cholangitis (IC) after Kasai operation.

Fragility fractures of the distal humerus: What is the optimal treatment?

In light of the growing number of elderly osteopenic patients with distal humeral fractures, we discuss the history of their management and current trends. Under most circumstances operative fixation and early mobilisation is the treatment of choice, as it gives the best results. The relative indications for and results of total elbow replacement versus internal fixation are discussed.     

Two-year cost comparison of vertebroplasty and kyphoplasty for the treatment of vertebral compression fractures: are initial surgical costs misleading?

Summary

The costs for treating kypho- and vertebroplasty patients were evaluated at up to 2 years postsurgery. There were no significant differences in adjusted costs in the first 9 months postsurgery, but kyphoplasty patients were associated with significantly lower adjusted treatment costs by 6.8–7.9 % in the remaining periods through 2 years postsurgery.

Introduction

Vertebral augmentation has been shown to be safe and effective for treating vertebral compression fractures. Comparative cost studies of initial treatment costs for kypho- and vertebroplasty have been mixed. The purpose of our study was to compare the costs for treating kypho- and vertebroplasty patients at up to 2 years postsurgery.

Methods

Vertebroplasty and kyphoplasty patients diagnosed with pathologic or closed lumbar/thoracic vertebral fractures were identified from the 5 % sample of the Medicare dataset (2006–2009). The final study cohort with at least 2 years follow-up comprised of 1,609 vertebroplasty and 2,878 kyphoplasty patients. The cumulative treatment costs (adjusted to June 2011 US$) were determined from the payer perspective. Differences in costs and length of stay were assessed by generalized linear mixed model regression, adjusting for covariates.

Results

The average adjusted costs for vertebroplasty patients within the first quarter and the first 2 years postsurgery were $14,585 [95 % confidence interval (CI), $14,109–15,078] and $44,496 (95 % CI, $42,763–46,299), respectively. The corresponding average adjusted costs for kyphoplasty patients were $15,117 (95 % CI, $14,752–15,491) and $41,339 (95 % CI, $40,154–42,560). There were no significant differences in adjusted costs in the first 9 months postsurgery, but kyphoplasty patients were associated with significantly lower adjusted treatment costs by 6.8–7.9 % in the remaining periods through 2 years postsurgery.

Conclusion

Our present study addresses some of the limitations in previous comparative cost studies of vertebroplasty and kyphoplasty. The higher adjusted costs for vertebroplasty patients than kyphoplasty patients by 1 year following the surgery reflect greater utilization of medical resources.     

A simple and effective implant for displaced fractures of the greater tuberosity: the “Bamberg” plate

Displaced fractures of the greater tuberosity are common findings in trauma surgical patients. Nevertheless, osteosynthesis of these fractures impairs the risk of secondary dislocation or secondary impingement due to the implant (e.g., 4.5 mm cancellous screws with spiked washers). We present an easy and simple technique/implant to perform an osteosynthesis of multiple-fractured greater tuberosity fractures. We use a self-adjusted calcaneus titanium plate (Litos^®) which is cut into a 6 or more holed small plate. In ten patients we had excellent postoperative outcomes with no complications and no secondary loss of reduction. The surgical technique is easy and efficient.