A novel solubility-enhanced curcumin formulation showing stability and maintenance of anticancer activity

Curcumin (CUR) is an active food compound, but its insolubility and instability in water contributes to low bioavailability. In this study, the solubility of CUR was enhanced by utilizing the solubilizing properties of rubusoside (RUB). The solubility of CUR in water increased linearly from 61 μg/mL to 2.318 mg/mL in the presence of RUB ranging from 1% to 10% (w/v). Dynamic light scattering and transmission electron microscopy studies found that CUR and RUB formed CUR-RUB nanoparticle (～8 nm) complexes. The RUB-solubilized CUR was stable in physiological conditions and did not precipitate when diluted or degrade when spray-dried to a completely reconstitutable powder. Furthermore, cell viability assays demonstrated the efficacy of RUB-solubilized CUR against human colon, breast, and pancreatic cancer cell lines. The development of this new solubilized, stable, and biologically active CUR formulation lays the foundation for future bioavailability improvement.     

Investigation of physicochemical factors affecting the stability of a pH-modulated solid dispersion and a tablet during storage

The stability of solid dispersions (SD) during storage is of concern. We prepared the pH-modulated SD (pSD) and compressed tablets consisting of polyethylene glycol (PEG) 6000 as a carrier, drug and MgO (alkalizer). Telmisartan (TEL), an ionizable poorly water-soluble drug, was chosen as a model drug. The changes in physicochemical factors such as the dissolution rate, drug crystallinity, microenvironmental pH (pH(M)) and intermolecular interactions of the pSD and the tablets were investigated over 3 months under different temperature and relative humidity (RH) conditions: refrigerator (5-8 °C), 25 °C/32% RH, 25 °C/55% RH, 25 °C/75% RH, 40°C/32% RH, 40 °C/55% RH, and 40 °C/75% RH. Differential scanning calorimetry (DSC) analysis of all samples revealed no distinct changes in the drug melting point. In contrast, powder X-ray diffraction (PXRD) diffractograms revealed that samples stored at 40 °C/75% RH for 1 month, 25 °C/75% RH for 3 months and 40 °C at all humidity conditions for 3 months showed gradual recrystallization of the drug. Fourier transform infrared (FTIR) spectra indicated a reduced intensity of intermolecular interactions between TEL and MgO in the pSD and tablet. The pH(M) also gradually decreased. These altered physicochemical factors under the stressed conditions resulted in decreased dissolution profiles in intestinal fluid (pH 6.8). In contrast, the dissolution rate in gastric fluid (pH 1.2) was almost unchanged because of the high intrinsic solubility of TEL at this pH.     

Long circulating nanoparticles of etoposide using PLGA‐MPEG and PLGA‐pluronic block copolymers: characterization,drug‐release,blood‐clearance,and biodistribution studies

The anti‐leukemic drug, etoposide (ETO), has variable oral bioavailability ranging from 24–74% with a short terminal half‐life of 1.5 h i.v. necessitating continuous infusion for 24–34 h for the treatment of leukemia. In the present study, etoposide‐loaded PLGA‐based surface‐modified nanoparticles (NPs) with long circulation were designed as an alternative to continuous i.v. administration. PLGA‐mPEG and PLGA‐PLURONIC copolymers were synthesised and used to prepared ETO‐loaded NPs by high‐pressure homogenization. The mean particle size of ETO‐loaded PLGA‐MPEG nanoparticles was 94.02±3.4 nm, with an Entrapment Efficiency (EE) of 71.2% and zeta potential value of −6.9±1.3 mV. ETO‐loaded PLGA‐pluronic nanoparticles had a mean particle size of 148.0±2.1 nm, an EE of 73.12±2.7%, and zeta potential value of −21.5±1.6 mV. In vitro release of the pure drug was complete within 4 h, but was sustained up to 7 days from PLGA‐mPEG nanoparticles and for 5 days from PLGA‐pluronic nanoparticles. Release was first order and followed non‐Fickian diffusion kinetics in both instances. ETO and ETO‐loaded PLGA nanoparticles labeled with ^99mTc were used in blood clearance studies in rats where the two coated NPs, ^99mTc‐ ETO‐PLGA‐PLU NP and ^99mTc‐ ETO‐PLGA‐mPEG NP, were found to be available in higher concentrations in the circulation as compared to the pure drug. Biodistribution studies in mice showed that ETO‐loaded PLGA‐MPEG NP and PLGA‐PLURONIC NP had reduced uptake by the RES due to their steric barrier properties and were present in the circulation for a longer time. Moreover, the NPs had greater uptake in bone and brain where concentration of the free drug, ETO, was negligible. Drug delivered from these NPs could result in a single i.v. injection that would release the drug for a number of days, which would be potentially beneficial and in better control of leukemia therapy. Drug Dev Res 71: 228–239, 2010. © 2010 Wiley‐Liss, Inc.     

Multitemperature stability and degradation characteristics of pergolide mesylate oral liquid

The stability of pergolide mesylate in an oral aqueous liquid was studied. Stability and solubility data were used to determine the degradation characteristics of the drug in this formulation. Samples were stored in the dark at 35°C, 45°C, and 60°C. At 1, 2, 4, 8, 12, and 16 weeks, samples were removed and stored in a -80°C freezer for high performance liquid chromatography (HPLC) assay at a later date. The initial drug concentration of 0.30 mg/mL was determined by assay after storage at -80°C. A solubility of 6.9 mg/mL was found for pergolide mesylate in the oral liquid at room temperature with a relative standard deviation (RSD) of 4.0%. The degradation process is considered first-order at 25°C and 35°C. At higher temperatures (45°C and 60°C), a color change and curvature at the latter time points in degradation profiles are ascribed to the presence of methylcellulose. The activation energy calculated for degradation of pergolide mesylate in the oral liquid was 21.3 kcal/mol. The time to reach 90% potency (t90) values were calculated to be 43 days and 3 days, respectively, for storage at 25°C and 35°C. Drug concentrations up to ~6 mg/mL can be maintained as a solution at room temperature with this formulation.     

Evaluation of potential of Zn-pectinate gel (ZPG) microparticles containing mesalazine for colonic drug delivery

BACKGROUND AND THE PURPOSE OF THE STUDY: Pectin derivatives have been utilized for colonic drug delivery (CDD). In this study the effects of different formulation variables upon the characteristics of pectinate microparticles (MPs) prepared by ionotropic gelation technique for colonic delivery of mesalazine was investigated. METHODS: In-vitro drug release of MPs was studied using USP XXIV dissolution apparatus type I, in different fluids e.g. simulated gastric fluid (SGF: pH 1.2), simulated intestinal fluid (SIF: pH 7.4), and simulated colonic fluid (SCF: pH 6.8) of volume 900 ml, at 100 rpm maintained at 37±0.2°C. This study was also performed in the presence of 4% w/v rat caecal content (RCC) using phosphate buffer saline (pH 6.8) as SCF. Gamma scintigraphy study was performed on New Zealand rabbit animal model using (99m) Tc. RESULTS: The results showed that maximum entrapment of mesalazine (86.1±1.7%) and strength of gel network zinc pectinate gel microparticles (ZPGD2) was achieved in cross-linking solution of pH 1.6. Batch of ZPGD2 showed least swelling ratio and drug release. In RCC medium the t(50%) value of CPG-MPs was 3-4 folds greater than ZPG-MPs. Scintigram showed the residence of ZPG-MPs (filled in enteric coated capsule) in colon more than 9 hrs and delivery of almost all the drug loading dose in colon. MAJOR CONCLUSION: The results of this study suggest the designed formulation of ZPG-MPs has the potential to serve as a colonic drug delivery system.     

Enhanced stability of horseradish peroxidase encapsulated in acetalated dextran microparticles stored outside cold chain conditions

Micro- and nanoparticles have been shown to improve the efficacy of safer protein-based (subunit) vaccines. Here, we evaluate a method of improving the vaccine stability outside cold chain conditions by encapsulation of a model enzyme, horseradish peroxidase (HRP), in an acid-sensitive, tunable biodegradable polymer, acetalated dextran (Ac-DEX). Vaccines that are stable outside the cold chain would be desirable for use in developing nations. Ac-DEX particles encapsulating HRP were prepared using two different methods, probe sonication and homogenization. These particles were stored under different storage conditions (-20 °C, 4 °C, 25 °C or 45 °C) for a period of 3 months. On different days, the particles were characterized for various physical and chemical measurements. At all conditions, Ac-DEX particles remained spherical in nature, as compared to PLGA particles that fused together starting at day 3 at 45 °C. Furthermore, our results indicated that encapsulation of HRP in Ac-DEX reduces its storage temperature dependence and enhances its stability outside cold chain conditions. Homogenized particles performed better than probe sonicated particles and retained 70% of the enzyme's initial activity as compared to free HRP that retained only 40% of the initial activity after 3 months of storage at 25 °C or 45 °C. Additionally, HRP activity was more stable when encapsulated in Ac-DEX, and the variance in enzyme activity between the different storage temperatures was not observed for either particle preparation. This suggests that storage at a constant temperature is not required with vaccines encapsulated in Ac-DEX particles. Overall, our results suggest that an Ac-DEX based micro-/nanoparticles system has wide applications as vaccines and drug delivery carriers, including those in developing nations.     

Plasma- and tissue concentrations following intramuscular administration of etofenamat. Pharmacokinetics of etofenamat and flufenamic acid in plasma, synovium, and tissues of patients with chronic polyarthritis after administration of an oily solution of etofenamat]

Studies on Plasma and Tissue Concentrations of Etofenamate following Intramuscular Application/Pharmacokinetics of etofenamate and flutenamic acid in plasma, synovia and tissues of patients with chronic polyarthritis after application of oily etofenamat solution Pharmacokinetics of etofenamate (ETO, CAS 30544-47-9; Rheumon i.m.) and flufenamic acid (FLU, CAS 530-78-9) were investigated in plasma, synovial fluid, and tissues after single intramuscular application of etofenamate to patients with rheumatoid arthritis. 62 patients with indicated operative procedure in the knee-joint received a single dose of etofenamate dissolved in oil before operation. At definite times between 1.5 and 48 h post injectionem samples from 6 patients of each time group were collected. Samples of plasma, synovial fluid, synovial membrane, muscle, bone, hyaline cartilage, and fat tissue and in some cases meniscus cartilage were taken. Concentrations of ETO and its active metabolite, FLU, were determined by HPTLC. In all tissues investigated, concentration/time courses of ETO and FLU were observed. ETO and FLU were measured first in all matrices 1.5 h at the latest 3 h post injectionem. Pharmacokinetics in tissues follows that in plasma. Rate-limiting step is the liberation of drug from the oil depot. For a long period pharmacokinetics of ETO and FLU is mainly determined by the constant liberation from the oil depot (zero order kinetics of liberation). Zero order kinetics is deduced from the linear ascent of the cumulated AUC (in percent) vs. time plot. It is directly related to the liberation of drug from the galenical formulation.(ABSTRACT TRUNCATED AT 250 WORDS)     

Chitosan nanoparticles as a dual growth factor delivery system for tissue engineering applications

The effect of stabilizer type (small molecule vs. polymeric) and the amount of micellar solubilized drug on Ostwald ripening of nanosuspensions was investigated. Indomethacin nanosuspensions were prepared with small molecule stabilizers (sodium lauryl sulfate (SLS) and Dowfax 2A1 (DF)) and a polymeric stabilizer (hydroxypropyl methyl cellulose (HPMC)). Two different drug:stabilizer ratios were used to evaluate the effect of micellar solubilized drug. The Ostwald ripening potential of nanosuspensions was evaluated by subjecting them to various stress conditions (temperature (15, 25, 35 and 45°C), thermal cycling, and mechanical shaking) for three months. The mean particle size increased in all SLS and DF formulations stored under different stress conditions. No effect of micellar solubilized drug on the Ostwald ripening rate was observed. In the case of HPMC formulations only those stored at higher temperatures (35 or 45°C) exhibited an increase in mean particle size. The increase in size in the HPMC formulation stored at 45°C was attributed to dehydration of the HPMC chains and subsequent loss of protection of the nanoparticles. The cube of the mean particle diameter versus time plot was determined to be non-linear for all formulations exhibiting Ostwald ripening. Therefore, according to the Lifshitz, Slyozov and Wagner theory the process was not diffusion controlled. The most probable mechanism for Ostwald ripening was surface nucleation controlled.     

Clarithromycin- and omeprazole-containing gliadin nanoparticles for the treatment of Helicobacter pylori

The aim of the present work was to prepare and evaluate the oral mucoadhesive sustained release nanoparticles of clarithromycin and omeprazole in order to improve patient compliance by improving its therapeutic effect and reducing its dose-related side effects. The clarithromycin- and omeprazole-containing gliadin nanoparticles were prepared by the desolvation method using Pluronic F-68 as a stabilizing agent. The results showed that this method is reproducible, easy, and leads to the efficient entrapment of drug as well as formation of spherical particles ranging from 400 to 650 nm. The maximum percentage of drug entrapment for clarithromycin and omeprazole was 81.7 +/- 2.2 and 73.7 +/- 3.9%, respectively, whereas the percentage of yield of the system was 85.1 +/- 1.9%. The sustained release behavior of gliadin nanoparticles was evaluated in phosphate-buffered saline (pH 7.4) and simulated gastric fluid (pH 1.2), at 37 +/- 1 degrees C. Their mucoadhesive properties were determined by in vitro and in vivo methods. In vitro antibacterial activity of the formulations was performed on isolated culture of Helicobacter pylori, which showed greater eradication effect of dual therapy entrapped formulations when compared with single therapy containing formulations and plain drugs.     

Preparation and characterization of polymeric pH-sensitive STEALTH® nanoparticles for tumor delivery of a lipophilic prodrug of paclitaxel

Paclitaxel is an effective and widely used anti-cancer agent. However, the drug is difficult to formulate for parenteral administration because of its low water solubility and Cremophor EL, the expient used for its formulation, has been shown to cause serious side effects. The present study reports an alternative administration vehicle involving a lipophilic paclitaxel prodrug, paclitaxel oleate, incorporated in the core of a nanoparticle-based dosage form. A hydrophobic poly (β-amino ester) (PbAE) was used to formulate the nanoparticles, which were stabilized with a mixture of phosphatidylcholine, Synperonic? F 108, and poly(ethylene glycol)-dipalmitoyl phosphatidyl ethanolamine. PbAE undergoes rapid dissolution when the pH of the medium is less than 6.5 and is expected to rapidly release its content within the acidic tumor microenvironment and endo/lysosome compartments of cancer cells. PbAE nanoparticles were prepared by an ultrasonication method and characterized for particle size and physical stability. The nanoparticles obtained had a diameter of about 70 nm and a good physical stability when stored at 4 °C. In vitro cellular uptake and release of paclitaxel oleate PbAE nanoparticles were studied in Jurkat acute lymphoblastic leukemia cells. The results were compared with pclitaxel oleate in poly(?-caprolactone) (PCL) particles, that do not display pH-sensitive release behavior, and paclitaxel in PbAE particles. Both uptake and release of the prodrug were faster when administered in PbAE than in PCL, but much slower than those of the free drug in PbAE. Cytotoxicity assay was performed on the formulations at different doses. Paclitaxel and paclitaxel oleate showed almost identical activity, IC50 123 and 128 nM, respectively, while that of the prodrug in PCL was much lower with IC50 at 2.5 μM. Thus, PbAE nanoparticles with the incorporated paclitaxel prodrug paclitaxel oleate may prove useful for replacement of the toxic Cremophor EL and also by improving the distribution of the drug to the tumor.     

Development and evaluation of inhalational liposomal system of budesonide for better management of asthma

Budesonide is a corticosteroid used by inhalation in the prophylactic management of asthma. However, frequent dosing and adverse effects (local and systemic) remain a major concern in the use of budesonide. Liposomal systems for sustained pulmonary drug delivery have been particularly attractive because of their compatibility with lung surfactant components. In the present investigation, pulmonary liposomal delivery system of budesonide was prepared by film hydration method and evaluated for sustained release. Various parameters were optimized with respect to entrapment efficiency as well as particle size of budesonide liposomes. For better shelf life of budesonide liposomes, they were freeze dried using trehalose as cryoprotectant. The liposomes were characterized for entrapment efficiency, particle size, and surface topography; in vitro drug release was evaluated out in simulated lung fluid at 37° at pH 7.4. The respirable or fine particle fraction was determined by using twin stage impinger. The stability study of freeze dried as well as aqueous liposomal systems was carried out at 2-8° and at ambient temperature (28±40). The freeze dried liposomes showed better fine particle fraction and drug content over the period of six months at ambient as well as at 2-8° storage condition compared to aqueous dispersion of liposomes.     

The physicodynamic properties of mucoadhesive polymeric films developed as female controlled drug delivery system

Phenoporlamine hydrochloride is a novel compound that is used for the treatment of hypertension. The purpose of this study was to develop a sustained release tablet for phenoporlamine hydrochloride because of its short biological half-life. Three floating matrix formulations of phenoporlamine hydrochloride based on gas forming agent were prepared. Hydroxypropyl methylcellulose K4M and Carbopol 971P NF were used in formulating the hydrogel drug delivery system. Incorporation sodium bicarbonate into matrix resulted in the tablet floating over simulated gastric fluid for more than 6 h. The dissolution profiles of all tablets showed non-Fickian diffusion in simulated gastric fluid. Moreover, release of the drug from these tablets was pH-dependent. In vivo evaluations of these formulations of phenoporlamine hydrochloride were conducted in six healthy male human volunteers to compare the sustained release tablets with immediate release tablets. Data obtained in these studies demonstrated that the floating matrix tablet containing more Carbopol was capable of sustained delivery of the drug for longer periods with increased bioavailability and the relative bioavailability of formulation (containing 25% Carbopol 971P NF, 8.3% HPMC K4M) showed the best bioequivalency to the reference tablet (the relative bioavailability was 1.11 ± 0.19).     

Pluronic@Fe3O4 nanoparticles with robust incorporation of doxorubicin by thermo-responsiveness

Doxorubicin was physically incorporated in magnetic nanoparticles by thermo-responsive manners. Magnetic nanoparticles were prepared by oxidizing ferric ions in ammonium solution. Thiolated Pluronic was synthesized by sequential modification of terminal hydroxyl groups of Pluronic to amine groups and thiol groups. Magnetic nanoparticles composed of iron oxide were surface-modified with thiolated Pluronic at different molar ratios of iron to thiol groups. Pluronic decoration on the magnetic nanoparticles was characterized by elemental analysis and transmission electron microscopy. Elemental analysis results on carbon atoms in the magnetic nanoparticles showed that the degree of Pluronic decoration was proportional to the feed ratio of thiolated Pluronic to iron oxide. Doxorubicin was incorporated to the magnetic nanoparticles thermo-responsive manners; a mixture of hydrophobized doxorubicin and the magnetic nanoparticles was incubated at 4°C and the temperature was subsequently increased to 37°C for thermally induced structural changes of the decorated Pluronic moieties. Doxorubicin-incorporated magnetic nanoparticles showed dramatic modulations of size distributions according to temperature changes, which was dependent on the degree of Pluronic decoration. Loading efficiency of doxorubicin was significantly affected by the number of decorated Pluronic on the magnetic nanoparticles; the higher Pluronic moieties the nanoparticles had, the higher loading efficiency they showed. Release profiles of doxorubicin from the nanoparticles showed that doxorubicin was liberated from the nanoparticles in response to reducing conditions of the release medium. Anti-cancer activities of the doxorubicin-incorporated nanoparticles were determined by a MTT-based cytotoxicity assay against A549 cell lines. Compared to native doxorubicin, the doxorubicin incorporated magnetites showed attenuated cytotoxicities due to slow release of doxorubicin from the carriers. Thus, thermally induced incorporation of anti-cancer drugs can be a novel method for multifunctional magnetic nanoparticles with imaging and anti-cancer treatments.     

Clarithromycin- and omeprazole-containing gliadin nanoparticles for the treatment of Helicobacter pylori

The aim of the present work was to prepare and evaluate the oral mucoadhesive sustained release nanoparticles of clarithromycin and omeprazole in order to improve patient compliance by improving its therapeutic effect and reducing its dose-related side effects. The clarithromycin- and omeprazole-containing gliadin nanoparticles were prepared by the desolvation method using Pluronic F-68® as a stabilizing agent. The results showed that this method is reproducible, easy, and leads to the efficient entrapment of drug as well as formation of spherical particles ranging from 400 to 650 nm. The maximum percentage of drug entrapment for clarithromycin and omeprazole was 81.7 ± 2.2 and 73.7 ± 3.9%, respectively, whereas the percentage of yield of the system was 85.1 ± 1.9%. The sustained release behavior of gliadin nanoparticles was evaluated in phosphate-buffered saline (pH 7.4) and simulated gastric fluid (pH 1.2), at 37 ± 1°C. Their mucoadhesive properties were determined by in vitro and in vivo methods. In vitro antibacterial activity of the formulations was performed on isolated culture of Helicobacter pylori, which showed greater eradication effect of dual therapy entrapped formulations when compared with single therapy containing formulations and plain drugs.     

Long-term stability, biocompatibility and oral delivery potential of risperidone-loaded solid lipid nanoparticles

A solid lipid nanoparticles (SLN) formulation to improve the oral delivery of risperidone (RISP), a poorly water-soluble drug, was designed and tested. Initially, lipid-RISP solubility was screened to select the best lipid for SLN preparation. Compritol(?)-based formulations were chosen and their long-term stability was assessed over two years of storage (at 25°C and 4°C) by means of particle size, polydispersity index (PI), zeta potential (ZP) and encapsulation efficiency (EE) measurements. SLN shape was observed by transmission electron microscopy (TEM) at the beginning and end of the study. The oxidative potential (OP) of the SLN was measured and their biocompatibility with Caco-2 cells was evaluated using the (4,5-dimethylthiazol-2-yl)2,5-dyphenyl-tetrazolium bromide (MTT) assay. In vitro drug release and transport studies were performed to predict the in vivo release profile and to evaluate the drug delivery potential of the SLN formulations, respectively. The RISP-loaded SLN systems were stable and had high EE and similar shape to the placebo formulations before and after storage. Classical Fickian diffusion was identified as the release mechanism for RISP from the SLN formulation. Biocompatibility and dose-dependent RISP transport across Caco-2 cells were observed for the prepared SLN formulations. The viability of SLN as formulations for oral delivery of poorly water-soluble drugs such as RISP was illustrated.     

The effect of polyoxyethylene polymers on the transport of ranitidine in Caco-2 cell monolayers

The phenomenon of physical ageing or structural relaxation and its effect on the performance of dexamethasone loaded poly(lactide-co-glycolide) (PLGA) microspheres was evaluated. Microspheres were incubated at temperatures (-20 (control), 4 and 25°C) below their glass transition temperature for 12 months. Physical ageing occurred in microspheres incubated at 25°C due to structural relaxation of the polymer chains which occurs to achieve a lower equilibrium energy state. Significant physical ageing was not observed in microspheres incubated at 4°C due to the lower molecular mobility of PLGA. The rate of structural relaxation (at 25°C) was a function of free volume which decreased with time. The microspheres incubated at 25°C for 12 months resulted in a slower release profile after day 25 when compared to the control microspheres. This was speculated to be due to a reduction in free volume upon physical ageing which in turn may reduce water absorption and retention of acidic degradation products in the PLGA matrix, hence reducing the degradation rate of PLGA. Therefore, exposure to ambient temperature during storage, shipping or handling may cause physical ageing in PLGA microspheres and hence, their performance may be affected. Storage temperatures of 4°C or lower may be considered appropriate for PLGA microspheres.     

Fatty acid and water-soluble polymer-based controlled release drug delivery system

Sustained release capsule formulations based on three components, drug, water-soluble polymer, and water-insoluble fatty acid, were developed. Theophylline, acetaminophen, and glipizide, representing a wide spectrum of aqueous solubility, were used as model drugs. Povidone and hydroxypropyl cellulose were selected as water-soluble polymers. Stearic acid and lauric acid were selected as water-insoluble fatty acids. Fatty acid, polymer, and drug mixture was filled into size #0 gelatin capsules and heated for 2 h at 50 °C. The drug particles were trapped into molten fatty acid and released at a controlled rate through pores created by the water-soluble polymer when capsules were exposed to an aqueous dissolution medium. Manipulation of the formulation components enabled release rates of glipizide and theophylline capsules to be similar to commercial Glucotrol XL tablets and Theo-24 capsules, respectively. The capsules also exhibited satisfactory dissolution stability after exposure to 30 °C/60% relative humidity (RH) in open Petri dishes and to 40 °C/75% RH in closed high-density polyethylene bottles. A computational fluid dynamic-based model was developed to quantitatively describe the drug transport in the capsule matrix and the drug release process. The simulation results showed a diffusion-controlled release mechanism from these capsules.     

Preparation and antitumor characteristics of PLA/(PEG-PPG-PEG) nanoparticles loaded with camptothecin.

Camptothecin (CPT)-loaded nanoparticles were prepared using poly(dl-lactic acid) (PLA) and poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) copolymer (PEG-PPG-PEG), and examined for particle characteristics, in vitro release, pharmacokinetics and efficacy. The preparative condition, in which the ratio of PLA/PEG-PPG-PEG/CPT was 35/35/4 (w/w/w) and organic solvent (dichloromethane) was evaporated from the emulsion at 18 degrees C, gave the nanoparticles with the diameter of approximately 230nm, fairly high drug content (ca. 1.6% (w/w)) and stable entrapment of the drug, which were used for in vivo studies. After i.v. administration to normal rats, the nanoparticles showed slightly smaller AUC but much larger MRT as compared with CPT solution, and delivered the drug greatly to the surrounding tissues, in particular to the liver. When antitumor effect was examined by i.v. administration to mice bearing sarcoma 180 (S-180) solid tumor, the nanoparticles showed a significant suppression of tumor growth without body weight loss, and their effect was better than that of CPT solution. The PLA/PEG-PPG-PEG nanoparticles were considered potentially useful to enhance the efficacy of CPT, to which the high drug retention in the body and gradual drug release appeared to be importantly related.     

Investigation of PEG crystallization in frozen and freeze-dried PEGylated recombinant human growth hormone-sucrose systems: implications on storage stability

The objectives of the current study were to investigate (i) the phase behavior of a PEGylated recombinant human growth hormone (PEG-rhGH, ～60 kDa) during freeze-drying and (ii) its storage stability. The phase transitions during freeze-thawing of an aqueous solution containing PEG-rhGH and sucrose were characterized by differential scanning calorimetry. Finally, PEG-rhGH and sucrose formulations containing low, medium, and high polyethylene glycol (PEG) to sucrose ratios were freeze-dried in dual-chamber syringes and stored at 4°C and 25°C. Chemical decomposition (methionine oxidation and deamidation) and irreversible aggregation were characterized by size-exclusion and ion-exchange chromatography, and tryptic mapping. PEG crystallization was facilitated when it was covalently linked with rhGH. When the solutions were frozen, phase separation into PEG-rich and sucrose-rich phases facilitated PEG crystallization and the freeze-dried cake contained crystalline PEG. Annealing caused PEG crystallization and when coupled with higher drying temperatures, the primary drying time decreased by up to 51%. When the freeze-dried cakes were stored at 4°C, while there was no change in the purity of the PEG-rhGH monomer, deamidation was highest in the formulations with the lowest PEG to sucrose ratio. When stored at 25°C, this composition also showed the most pronounced decrease in monomer purity, the highest level of aggregation, and deamidation. Furthermore, an increase in PEG crystallinity during storage was accompanied by a decrease in PEG-rhGH stability. Interestingly, during storage, there was no change in PEG crystallinity in formulations with medium and high PEG to sucrose ratios. Although PEG crystallization during freeze-drying did not cause protein degradation, crystallization during storage might have influenced protein stability.     

Stability studies of chitosan-DNA-FAP-B nanoparticles for gene delivery to lung epithelial cells

A successful gene delivery system requires efficiency and stability during storage. Stability studies are imperative for nanomedicines containing biotechnological products such as plasmids and targeting peptides. Chitosan-DNA-FAP-B nanoparticles are novel non-viral vectors for specific gene delivery to the lung epithelial cells. In this study, the storage stability of chitosan-DNA-FAP-B nanoparticles at -20, 5 and 24 °C was examined. Size, zeta potential and transfection efficiency of these nano-particles in storage were also evaluated. Stability studies showed that chitosan-DNA-FAP-B nanoparticles were stable after 1 month when stored at -20 °C and retained their initial size, zeta potential and transfection efficiency. However, their stability was not desirable at 5 and 24 °C. Based on these results, it can be concluded that chitosan-DNA-FAP-B nanoparticles can be a promising candidate for gene delivery to lung epithelial cells with good storage stability at -20 °C during 1 month.