Folate-mediated poly(3-hydroxybutyrate-co-3-hydroxyoctanoate) nanoparticles for targeting drug delivery

A novel targeting drug delivery system (TDDS) has been developed. Such a TDDS was prepared by W₁/O/W₂ solvent extraction/evaporation method, adopting poly(3-hydroxybutyrate-co-3-hydroxyoctanoate) [P(HB-HO)] as the drug carrier, folic acid (FA) as the targeting ligand, and doxorubicin (DOX) as the model anticancer drug. The average size, drug loading capacity and encapsulation efficiency of the prepared DOX-loaded, folate-mediated P(HB-HO) nanoparticles (DOX/FA–PEG–P(HB-HO) NPs) were found to be around 240 nm, 29.6% and 83.5%. The in vitro release profile displayed that nearly 50% DOX was released in the first 5 days. The intracellular uptake tests of the nanoparticles (NPs) in vitro showed that the DOX/FA–PEG–P(HB-HO) NPs were more efficiently taken up by HeLa cells compared to non-folate-mediated P(HB-HO) NPs. In addition, DOX/FA–PEG–P(HB-HO) NPs (IC₅₀ = 0.87 μM) showed greater cytotoxicity to HeLa cells than other treated groups. In vivo anti-tumor activity of the DOX/FA–PEG–P(HB-HO) NPs showed a much better therapeutic efficacy in inhibiting tumor growth, and the final mean tumor volume was 178.91 ± 17.43 mm³, significantly smaller than normal saline control group (542.58 ± 45.19 mm³). All these results have illustrated that our techniques for the preparing of DOX/FA–PEG–P(HB-HO) NPs developed in present work are feasible and these NPs are effective in selective delivery of anticancer drug to the folate receptor-overexpressed cancer cells. The new TDDS may be a competent candidate in application in targeting treatment of cancers.     

Intracellular trafficking of nuclear localization signal conjugated nanoparticles for cancer therapy

Doxorubicin (DOX) is an anticancer drug with an intracellular site of action in the nucleus. For high antitumour activity, it should be effectively internalized into the cancer cells and accumulate in the nucleus. In this study, we have prepared a nuclear localization signal conjugated doxorubicin loaded Poly (d,l-lactide-co-glycolide) nanoparticles (NPs), to deliver doxorubicin to the nucleus efficiently. Physico-chemical characterization of these NPs showed that the drug is molecularly dispersed in spherical and smooth surfaced nanoparticles. NPs (～226 nm in diameter, 46% encapsulation efficiency) under in vitro conditions exhibited sustained release of the encapsulated drug (63% release in 60 days). Cell cytotoxicity results showed that NLS conjugated NPs exhibited comparatively lower IC₅₀ value (2.3 μM/ml) than drug in solution (17.6 μM/ml) and unconjugated NPs (7.9 μM/ml) in breast cancer cell line MCF-7 as studied by MTT assay. Cellular uptake studies by confocal laser scanning microscopy (CLSM) and fluorescence spectrophotometer showed that greater amount of drug is targeted to the nucleus with NLS conjugated NPs as compared to drug in solution or unconjugated NPs. Flow cytometry experiments results showed that NLS conjugated NPs are showing greater cell cycle (G2/M phase) blocking and apoptosis than native DOX and unconjugated NPs. In conclusion, these results suggested that NLS conjugated doxorubicin loaded NPs could be potentially useful as novel drug delivery system for breast cancer therapy.     

Pharmaceutical Nanotechnology Nanoparticle-Based Topical Ophthalmic Formulations for Sustained Celecoxib Release

Celecoxib-loaded NPs were prepared from biodegradable polymers such as poly- e-caprolactone (PCL), poly(L-lactide) (PLA), and poly(D,L-lactide-co-glycolide) (PLGA) by spontaneous emulsification solvent diffusion method. Different concentrations of polymers, emulsifier, and cosurfactants were used for formulation optimization. Nanoparticles (NPs) were characterized regarding their particle size, PDI, zeta potential, shape, morphology, and drug content. Celecoxib-loaded NPs were incorporated into eye drops, in situ gelling system, and gel and characterized regarding their pH, viscosity, uniformity of drug content, in vitro release, and cytotoxicity. The results of optimized celecoxib-loaded PCL-, PLGA-, and PLA-NPs, respectively, are particle size 119 ± 4, 126.67 ± 7.08, and 135.33 ± 4.15 nm; zeta potential ? 22.43 ± 2.91, ? 25.46 ± 2.35, and ? 31.81 ± 2.54 mV; and encapsulation efficiency 93.44 ± 3.6%, 86.00 ± 1.67%, and 79.04 ± 2.6%. TEM analyses revealed that NPs have spherical shapes with dense core and distinct coat. Formulations possessed uniform drug content with pH and viscosity compatible with the eye. Formulations showed sustained release without any burst effect with the Higuchi non-Fickian diffusion mechanism. Cytotoxicity studies revealed that all formulations are nontoxic. Our formulations provide a great deal of flexibility to formulation scientist whereby sizes and zeta potentials of our NPs can be tuned to suit the need using scalable and robust methodologies. These formulations can thus serve as a potential drug delivery system for both anterior and posterior eye diseases. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 102:1036–1053, 2013     

Poly-(ethylene glycol) modified gelatin nanoparticles for sustained delivery of the anti-inflammatory drug Ibuprofen-Sodium: An in vitro and in vivo analysis

The limited bioavailability and rapid clearance of the anti-inflammatory drug Ibuprofen Sodium (IbS) necessitates repeated drug administration. To address this, injectable IbS loaded PEGylated gelatin nanoparticles (PIG NPs) of size ~ 200 nm and entrapment efficiency ~ 70%, providing sustained release in vitro were prepared by a modified two-step desolvation process. The developed nanomedicine, containing a range of IbS concentrations up to 1 mg/mL proved to be non-toxic, hemocompatible and non-immunogenic, when tested through various in vitro assays and was reaffirmed by in vivo cytokine analysis. HPLC analysis of intravenously administered PIG NPs showed a sustained release of IbS for ~ 4 days with improved bioavailability and pharmacokinetics when compared to bare IbS and IbS-loaded non-PEGylated GNPs. Histological analysis of liver and kidney revealed tissue integrity as in the control, indicating biocompatibility of PIG NPs. The results demonstrate improved plasma half-life of IbS when encapsulated within nanogelatin, thereby aiding reduction in its frequency of administration.From the Clinical EditorIn this preclinical study, improved plasma half-life of ibuprofen sodium was demonstrated when encapsulated within PEGylated gelatin nanoparticles of ~200 nm size, expected to lead to reduced frequency of administration in future clinical applications.     

Enhanced Oral Bioavailability of Paclitaxel Formulated in Vitamin E-TPGS Emulsified Nanoparticles of Biodegradable Polymers: In Vitro and In Vivo Studies

This work evaluates the effects of paclitaxel loaded polymeric nanoparticles (NPs) composed of poly(D,L-lactic-co-glycolic acid) (PLGA) with vitamin E TPGS as emulsifier for oral chemotherapy. NPs prepared by a modified solvent extraction/evaporation technique were observed in spherical shape of 200-300 nm diameter with a high drug encapsulation efficiency (EE) of 80.9%. The TPGS-emulsified PLGA NPs formulation of paclitaxel was found of great advantages over that of Taxol®. The in vitro viability experiment showed that the NP formulation could be 1.28,1.38,1.12 times more effective than Taxol® after 24, 48, 72 h incubation with MCF-7 human breast cancer cell line at 2.5 μg/mL paclitaxel concentration. In vivo evaluation confirmed the advantages of the TPGS-emulsified PLGA NP formulation versus Taxol® in promoting oral bioavailability of paclitaxel. Such a NP formulation achieved more than 10 times higher oral bioavailability than Taxol®, which resulted 9.74-fold higher therapeutic effect and 12.56-fold longer sustainable therapeutic time than Taxol®. The present proof-of-concept experimental data proved that the formulation of vitamin E TPGS emulsified PLGA NPs is a promising approach for paclitaxel oral administration. Oral chemotherapy by NPs formulation is feasible. © 2010 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 99:3552-3560, 2010     

The chemotherapeutic potential of doxorubicin-loaded PEG-b-PLGA nanopolymersomes in mouse breast cancer model

Vesicles of mPEG-PLGA block copolymer were developed to deliver a therapeutic quantity of doxorubicin (DOX) for breast cancer treatment. The DOX-loaded nanoparticles (NPs) were prepared by the pH-gradient method and then evaluated in terms of morphology, size, DOX encapsulation efficiency and in vitro drug release mechanism.The PEG-PLGA nanopolymersomes were 134 ± 1.2 nm spherical NPs with a narrow size distribution (PDI = 0.121). DOX was entrapped in mPEG-PLGA nanopolymersomes with an encapsulation efficiency and a loading content of 91.25 ± 4.27% and 7.3 ± 0.34%, respectively. The DOX-loaded nanopolymersomes were found to be stable, demonstrating no significant change in particle size and encapsulation efficiency (EE%) during the 6-month storage period of the lyophilized powder at 4 °C. The nanopolymersomes sustained the release of DOX. In cytotoxicity studies of 4T1 cell line samples, free DOX showed a higher cytotoxicity (IC50 = 1.76 μg/mL) than did DOX-loaded nanopolymersomes (15.82 μg/mL) in vitro. In order to evaluate the antitumor efficacy and biodistribution of DOX-loaded nanopolymersomes, murine breast tumors were established on the BALB/c mice, and in vivo studies were performed. The obtained results demonstrated that the prepared drug delivery system was highly effective against a murine breast cancer tumor model and successfully accumulated in the tumor site through an enhanced permeation and retention mechanism.In vivo studies also proved that DOX-loaded nanopolymersomes are stable in blood circulation and could be considered a promising and effective DOX delivery system for breast cancer treatment.     

Inclusion of fenofibrate in a series of mesoporous silicas using microwave irradiation

A selection of porous silicas were combined with a model drug using a recently developed, controlled microwave heating process to determine if the application of microwave irradiation could enhance subsequent drug release. Five mesoporous silica types were investigated (core shell, core shell rehydrox, SBA-15, silica gel, SYLOID®) and, for comparison, one non-porous silica (stober). These were formulated using a tailored microwave heating method at drug/excipient ratios of 1:1, 1:3 and 1:5. In addition, all experiments were performed both in the presence and absence of water, used as a fluidising media to aid interaction between drug and support, and compared with results obtained using more traditional heating methods. All formulations were then characterised using differential scanning calorimetry (DSC), powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transformation infrared spectroscopy (FT-IR). Pharmaceutical performance was investigated using in vitro drug release studies. A significant enhancement in the release profile of fenofibrate was observed for formulations prepared using microwave heating in the absence of water for five of the six silica based formulations. Of all the formulations analysed, the greatest extent of drug release within the experimental 30 min was the 1:5 core shell rehydrox achieving a total of 86.6 ± 2.8%. The non-porous (stober) particles did not exhibit an increased release of the drug under any experimental conditions studied. This anomaly is thought to be a result of the comparatively small surface area of the silica particles, thus preventing the adsorption of drug molecules.     

Batch and fixed bed adsorption of levofloxacin on granular activated carbon from date (Phoenix dactylifera L.) stones by KOH chemical activation

Granular activated carbon (KAC) was prepared from abundant Phoenix dactylifera L. stones by microwave- assisted KOH activation. The characteristics of KAC were tested by pore analyses, scanning electron microscopy (SEM) and Fourier transforms infrared spectroscopy (FTIR). The adsorption behavior of levofloxacin (LEV) antibiotic on KAC with surface area of 817 m²/g and pore volume of 0.638 cm³/g were analyzed using batch and fixed bed systems. The equilibrium data collected by batch experiments were well fitted with Langmuir compared to Freundlich and Temkin isotherms. The effect of flow rate (0.5–1.5 ml/min), bed height (15–25 cm), and initial LEV concentration (75–225 mg/l) on the behavior of breakthrough curves was explained. The fixed bed analysis showed the better correlation of breakthrough data by both Thomas and Yoon-Nelson models. High LEV adsorption capacity of 100.3 mg/g was reported on KAC, thus being an efficient adsorbent for antibiotic pollutants to protect ecological systems.     

Development and characterization of parenteral nanoemulsions containing thalidomide

This study reports the development of nanoemulsions intended for intravenous administration of thalidomide (THD). The formulations were prepared by spontaneous emulsification method and optimized with respect to thalidomide (0.01–0.05%, w/w), and hydrophilic emulsifier (polysorbate 80; 0.5–4.0%, w/w) content. The formulations were evaluated concerning physical appearance and drug crystallization; droplet size; zeta potential and drug assay. Only the formulation containing 0.01% THD and 0.5% polysorbate kept its properties in a satisfactory range over the evaluated period (60 days), i.e. droplet size around 200 nm, drug content around 95% and zeta potential around ?30 mV. The transmission electron microscopy revealed emulsion droplets almost spherical in shape confirming the results obtained by photon correlation spectroscopy. Drug crystallization observed for higher content (THD 0.05%, w/w) nanoemulsions was investigated. The crystals observed at optical microscopy presented a different crystal habit compared to that of the raw material used. It was speculated whether the kind of THD polymorph employed could influence nanoemulsion formulation. Formulations were prepared with either one of THD polymorphs (β- or α-) and crystals were characterized by fourier transformed infrared spectroscopy (FTIR) and X-ray diffraction (XRD). It was observed that regardless of the polymorph employed (β- or α-), drug crystallization occurs in the α-form. THD solubility in oils was not influenced by the polymorphic form. In addition, the in vitro dissolution profile of the selected formulation (THD 0.01%, w/w; polysorbate 0.5%, w/w) was assessed by bulk-equilibrium reverse dialysis sac technique and demonstrated a release profile similar to that of a THD acetonitrile solution, with around 95% THD being dissolved within 4 h. Finally, a pharmacokinetic simulation of an intravenous infusion of 250 mL of the selected nanoemulsion suggests that the parenteral administration of a dose as low as 25 mg might lead to therapeutic plasma concentrations of thalidomide.     

Theophylline-Loaded Compritol Microspheres Prepared by Ultrasound-Assisted Atomization

Nine solid dispersions were prepared by the melting method in the form of particles containing theophylline at 10%, 20%, and 30% (w/w) in three Compritols (Compritol 888 ATO, HD5 ATO, E ATO) to compare their efficiency in controlling theophylline release. After solidification the mass was ground and granules were evaluated by thermal [differential scanning calorimetry, hot stage microscopy (HSM)] and spectroscopic [Fourier transform infrared (FTIR), Raman, X-ray powder diffraction (XRD)] analysis and the solubility parameters. Another nine samples of the same composition were obtained as microspheres by ultrasound-assisted (US) atomization. XRD confirmed the presence of crystalline theophylline inside the solid dispersions. FTIR and Raman microspectroscopy revealed that crystals of the drug were present on the granule surface. On the contrary, the surface of the final microspheres did not present free drug crystals. The granules do not work so efficiently as microspheres in controlling the release of theophylline: 888 ATO ≈ HD5 ATO > E ATO represents the order of the ability of the Compritols to control the theophylline release from microspheres. HSM revealed that, on aging, the dissolved drug crystallizes, considerably modifying the granule formulation and that US vibration, speeding up the crystallization of the drug during the preparation of microspheres, greatly reduces the changes associated with aging.     

Computation of adsorption parameters for the removal of dye from wastewater by microwave assisted sawdust: Theoretical and experimental analysis

In this research, the microwave assistance has been employed for the preparation of novel material from agro/natural bio-waste i.e. sawdust, for the effective removal of methylene blue (MB) dye from aqueous solution. The characterization of the newly prepared microwave assisted sawdust (MASD) material was performed by using FTIR, SEM and XRD analyses. In order to obtain the maximum removal of MB dye from wastewater, the adsorption experimental parameters such as initial dye concentration, contact time, solution pH and adsorbent dosage were optimized by trial and error approach. The obtained experimental results were applied to the different theoretical models to predict the system behaviour. The optimum conditions for the maximum removal MB dye from aqueous solution for an initial MB dye concentration of 25 mg/L was calculated as: adsorbent dose of 3 g/L, contact time of 90 min, solution pH of 7.0 and at the temperature of 30 °C. Freundlich and pseudo-second order models was best obeyed with the studied experimental data. Langmuir maximum monolayer adsorption capacity of MASD for MB dye removal was calculated as 58.14 mg of MB dye/g of MASD. Adsorption diffusion model stated that the present adsorption system was controlled by intraparticle diffusion model. The obtained results proposed that, novel MASD was considered to be an effective and low-cost adsorbent material for the removal of dye from wastewater.     

Role of physicochemical characteristics in the uptake of TiO2 nanoparticles by fibroblasts

The relation between the physico-chemical properties of nanoparticles (NPs) and the degree of cellular uptake is incompletely elucidated. In this study, we investigated the influence on the cellular uptake of a wide range of fully characterized TiO₂ NPs. L929 fibroblasts were exposed for 24 h to clinically relevant concentrations of nano-TiO₂ and the degree of their association was assessed by ultrahigh resolution imaging microscopy (URI), scanning (SEM) and transmission (TEM) electron microscopy, as well as inductivity coupled plasma–mass spectroscopy (ICP–MS). The role of actin polymerization, a central feature of active internalization, was also studied and the results indicated that the internalization of TiO₂ NPs involves a combination of actin-dependent uptake of large agglomerates as well as non actin-dependent uptake of small agglomerates. SEM and TEM revealed that the agglomerates of all NPs types were attached to the cellular membrane as well as internalized and confined inside cytoplasmic vesicles. URI and ICP–MS demonstrated that the particle association with cells was dose-dependent. The highest association was observed for spherical particles having mixed anatase–rutile crystallographic phase and the lowest for spindle-shaped rutile particles. ICP–MS revealed that the association was size-dependent in the order 5 > 10 > 40 nm for anatase spherical nanoparticles.     

Preparation and evaluation of bioactive and compatible starch based superabsorbent for oral drug delivery systems

Novel types of highly swelling hydrogels (superabsorbent) were prepared by grafting crosslinked poly acrylic acid-co-2-hydroxyethylmetacrylate (PAA-co-HEMA) chains onto starch through a free radical polymerization method. The effect of grafting variables (i.e., concentration of methylenebisacrylamide (MBA), acrylic acid/2-hydroxy methymetacrylate (AA/HEMA) weight ratio, ammonium persulfate (APS), starch, neutralization percent, were systematically optimized to achieve a hydrogel with a maximum swelling capacity. The superabsorbent (SAP) formation was confirmed by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The controlled-release behavior of diclofenac sodium (DS) from SAP was investigated and showed that the release profiles of DS from superabsorbent polymer were slow (less than 6 %) in simulated gastric fluid (SGF, pH 1.6) over 3 h, but nearly all of the initial drug content was released in simulated intestinal fluid (SIF, pH 7.4) within 8 h after changing media. Overall, the results demonstrated that biodegradable superabsorbent could successfully deliver a drug to the intestine without losing the drug in the stomach, and could be potential candidates for an orally administrated drug delivery system.     

Development of spray-dried amorphous solid dispersions of tadalafil using glycyrrhizin for enhanced dissolution and aphrodisiac activity in male rats

Tadalafil (TDL) is a phosphodiesterase-5 inhibitor (PDE5I), indicated for erectile dysfunction (ED). However, TDL exhibits poor aqueous solubility and dissolution rate, which may limit its application. This study aims to prepare amorphous solid dispersion (ASD) by spray-drying, using glycyrrhizin-a natural drug carrier. Particle and physicochemical characterizations were performed by particle size, polydispersity index measurement, yield, drug content estimation, Fourier Transformed Infrared (FTIR) spectroscopy, Differential scanning calorimetry (DSC), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and dissolution study. In order to evaluate the aphrodisiac activity of the prepared ASD, sexual behavior study was performed in male rats. It is further considered for the stability study. Our results revealed that TDL-GLZ spray-dried dispersion was a successful drug-carrier binary mixture. XRD and SEM showed that ASD of TDL with GLZ presented in the amorphous state and dented-spherical shape, unlike the drug indicating crystalline and spiked shaped. The optimized ASD3 formulation with particle size (1.92 µm), PDI (0.32), yield (97.78%) and drug content (85.00%) showed 4.07 folds’ increase in dissolution rate compared to pure TDL. The results obtained from the in vivo study exhibit significantly improved aphrodisiac activity with ASD3. The stability study revealed that the prepared ASD3 did not show any remarkable changes in the dissolution and drug content for 1 month storage at room temperature.     

Inclusion complexes of tadalafil with natural and chemically modified β-cyclodextrins. I: Preparation and in-vitro evaluation

The aim of this work was to investigate the inclusion complexation between tadalafil, a practically insoluble selective phosphodiesterase-5 inhibitor (PDE5), and two chemically modified β-cyclodextrins: hydroxypropyl-β-cyclodextrin (HP-β-CD) and heptakis-[2,6-di-O-methyl]-β-cyclodextrin (DM-β-CD), in comparison with the natural β-cyclodextrin (β-CD) in order to improve the solubility and the dissolution rate of the drug in an attempt to enhance its bioavailability. Inclusion complexation was investigated in both the solution and the solid state. The UV spectral shift method indicated guest–host complex formation between tadalafil and the three cyclodextrins (CDs). The phase solubility profiles with all the used CDs were classified as A_p-type, indicating the formation of higher order complexes. The complexation efficiency values (CE), which reflect the solubilizing power of the CDs towards the drug, could be arranged in the following order: DM-β-CD > HP-β-CD > β-CD. Solid binary systems of tadalafil with CDs were prepared by kneading and freeze-drying techniques at molar ratios of 1:1, 1:3 and 1:5 (drug to CD). Physical mixtures were prepared in the same molar ratios for comparison. Physicochemical characterization of the prepared systems at molar ratio of 1:5 was studied using differential scanning calorimetry (DSC), X-ray diffractometry (XRD), and Fourier-transform infrared spectroscopy (FTIR). The results showed the formation of true inclusion complexes between the drug and both HP-β-CD and DM-β-CD using the freeze-drying method at molar ratio of 1:5. In contrast, crystalline drug was detectable in all other products. The dissolution of tadalafil from all the prepared binary systems was carried out to determine the most appropriate CD type, molar ratio, and preparation technique to prepare inclusion complexes to be used in the development of tablet formulation for oral delivery of tadalafil. The dissolution enhancement was increased on increasing the CD proportion in all the prepared systems. Both the CD type and the preparation technique played an important role in the performance of the system. Irrespective of the preparation technique, the systems prepared using HP-β-CD and DM-β-CD yielded better performance than the corresponding ones prepared using β-CD. In addition, the freeze-drying technique showed superior dissolution enhancement than other methods especially when combined with the β-CD derivatives.     

Development of PVP/PEG mixtures as appropriate carriers for the preparation of drug solid dispersions by melt mixing technique and optimization of dissolution using artificial neural networks

The effect of plasticizer’s (PEG) molecular weight (MW) on PVP based solid dispersions (SDs), prepared by melt mixing, was evaluated in the present study using Tibolone as a poorly water soluble model drug. PEGs with MW of 400, 600, and 2000 g/mol were tested, and the effect of drug content, time and temperature of melt mixing on the physical state of Tibolone, and the dissolution characteristics from SDs was investigated. PVP blends with PEG400 and PEG600 were completely miscible, while blends were heterogeneous. Furthermore, a single T_g recorded in all samples, indicating that Tibolone was dispersed in a molecular lever (or in the form of nanodispersions), varied with varying PEG’s molecular weight, melt mixing temperature, and drug content, while FTIR analysis indicated significant interactions between Tibolone and PVP/PEG matrices. All prepared solid dispersion showed long-term physical stability (18 months in room temperature). The extent of interaction between mixture components was verified using Fox and Gordon–Taylor equations. Artificial neural networks, used to correlate the studied factors with selected dissolution characteristics, showed good prediction ability.     

Combined effects of low levels of palmitate on toxicity of ZnO nanoparticles to THP-1 macrophages

We have recently proposed that the interaction between food components and nanoparticles (NPs) should be considered when evaluating the toxicity of NPs. In the present study, we used THP-1 differentiated macrophages as a model for immune cells and investigated the combined toxicity of low levels of palmitate (PA; 10 or 50 μM) and ZnO NPs. The results showed that PA especially at 50 μM changed the size, Zeta potential and UV–vis spectra of ZnO NPs, indicating a possible coating effect. Up to 32 μg/mL ZnO NPs did not significantly affect mitochondrial activity, intracellular reactive oxygen species (ROS) or release of interleukin 6 (IL-6), but significantly impaired lysosomal function as assessed by neutral red uptake assay and acridine orange staining. The presence of 50 μM PA, but not 10 μM PA, further promoted the toxic effects of ZnO NPs to lysosomes but did not significantly affect other endpoints. In addition, ZnO NPs dose-dependently increased intracellular Zn ions in THP-1 macrophages, which was not significantly affected by PA. Taken together, the results of the present study showed a combined toxicity of low levels of PA and ZnO NPs especially to lysosomes in THP-1 macrophages.     

Mesophase and size manipulation of itraconazole liquid crystalline nanoparticles produced via quasi nanoemulsion precipitation

The fabrication of drug nanoparticles (NPs) with process-mediated tunable properties and performances continues to grow rapidly during the last decades. This study investigates the synthesis and phase tuning of nanoparticulate itraconazole (ITR) mesophases using quasi nanoemulsion precipitation from acetone/water systems to seek out an alternative pathway to the nucleation-based NP formation. ITR liquid crystalline (LC) phases were formed and nematic–smectic mesomorphism was achieved via controlling solvent:antisolvent temperature difference (ΔT_S:AS). The use of ΔT_S:AS = 49.5 °C was associated with a nematic assembly, while intercalated smectic A layering was observed at ΔT_S:AS = 0 °C, with both phases confined in the nanospheres at room temperature. The quasi emulsion system has not been investigated at the nanoscale to date and in contrary to the microscale, quasi nanoemulsion was observed over the solvent:antisolvent viscosity ratios of 1:7–1:1.4. Poly(acrylic acid) in the solvent phase exhibited a concentration dependent interaction when ITR formed NPs. This nanodroplet-based approach enabled the preparation of a stable ITR nanodispersion using Poloxamer 407 at 80 °C, which was unachievable before using precipitation via nucleation. Findings of this work lay groundwork in terms of rationalised molecular assembly as a tool in designing pharmaceutical LC NPs with tailored properties.     

Adsorption of hexavalent chromium in aqueous solution on activated carbon prepared from apple peels

In the present study, activated carbon prepared from apple peels (ACAP) was used to remove chromium (VI) from aqueous solution. The characterization of this ACAP has been performed using different analytical techniques such as FTIR and SEM. The adsorption parameters studied were: pH [2- 7], adsorbent dose [0.025–0.15 g/50 mL], initial Cr(VI) concentration [10–50 mg/L] and temperature [10–40 °C]. Maximum Cr(VI) adsorption of 36.01 mg/g was achieved using Cr(VI) concentration of 50 mg/L, pH of 2, adsorbent dose of 0.05 g/50 mL, contact time of 4 h and temperature of 28 °C. This ACAP gave a Cr(VI) adsorption capacity better than a commercial activated carbon. The experimental data fitted well to Freundlich isotherm (R² = 0.99) and kinetics followed the pseudo-second order model. Thermodynamic parameters, ΔG < 0, ΔH° = 1.99 (Kcal/mol) and ΔS° = 0.0079 (Kcal/K mol) indicate that the adsorption process is spontaneous and endothermic.     

Reduction in burst release of PLGA microparticles by incorporation into cubic phase-forming systems

A high initial burst release of an phosphorothioate oligonucleotide drug from poly(lactide-co-glycolide) (PLGA) microparticles prepared by the w/o/w solvent extraction/evaporation was reduced by incorporating the microparticles into the following glycerol monooleate (GMO) formulations: 1) pure molten GMO, 2) preformed cubic phase (GMO + water) or 3) low viscosity in situ cubic phase-forming formulations (GMO + water + cosolvent). The in situ cubic phase-forming formulations had a low viscosity in contrast to the first two formulations resulting in good dispersability of the microparticles and good syringability/injectability. Upon contact with an aqueous phase, a highly viscous cubic phase formed immediately entrapping the microparticles. A low initial burst and a continuous extended release over several weeks was obtained with all investigated formulations. The drug release profile could be well controlled by the cosolvent composition with the in situ systems.