Chitosan microparticle preparation for controlled drug release by response surface methodology

The objectives were to investigate the effects of formulation variables on the release of drug and to optimize the formulation of chitosan microparticles loaded with drug for controlled release using response surface methodology. Chitosan microparticles were prepared by dropping a chitosan solution into sodium tripolyphosphate (TPP) through ionic cross-linking. The release behaviour of felodipine as a model drug was affected by preparation variables. A central composite design was used to evaluate and optimize the effect of preparation variables, chitosan concentration (X1), the pH of the TPP solution (X2) and cross-linking time (X3) on the cumulative per cent drug release (Y) in 24 h. Chitosan concentration and cross-linking time affected negatively the release of felodipine, while the pH of the TPP did so positively and was the highest influential factor. The optimum rate of drug release, 100% in 24 h, was achieved at 1.8% chitosan concentration, a pH 8.7 for the TPP solution and 9.7 min cross-linking time.     

Evaluation of an enteric-coated naproxen pellet formulation

An enteric-coated, pellet formulation of naproxen has been evaluated in eight healthy subjects. Each volunteer was dosed with 153Sm-labelled, enteric-coated pellets on two occasions, once whilst fasted and once after breakfast. Gastrointestinal transit was followed using gamma scintigraphy and drug absorption compared with that from uncoated naproxen pellets dosed on a separate occasion. The pH in the stomach and intestines was monitored using radiotelemetry capsules. Gastric emptying was delayed by dosing after breakfast, but small intestinal transit of the enteric-coated formulation was the same on both occasions. The highest pH recorded from the stomach was 4.0 and in all subjects the pH rose to at least 7.3 in the small intestine. The onset of drug absorption was fastest from the uncoated formulation and slowest from the coated pellets taken after breakfast. The total amount of drug absorbed was the same on all three occasions.     

Novel microparticle drug delivery systems based on chitosan and Eudragit(®)RSPM to enhance diltiazem hydrochloride release property

The aim of this study was to enhance the release properties of diltiazem hydrochloride (diltiazem HCl) by using microparticle system. For this reason, microparticle drug delivery systems based on chitosan and Eudragit(?)RSPM were developed. The microparticles were prepared by using double-emulsion solvent extraction method and the mean sizes of microparticles were less than 120?μm. The in vitro drug release from microparticles was studied in simulated gastric (pH 1.2) and intestinal media (pH 7.4) than the results were evaluated by kinetically. In vitro diltiazem HCl release from microparticles showed good zero order kinetic. For the microparticles with chitosan, the release of diltiazem HCl at pH 1.2 could be effectively sustained, while the release of diltiazem HCl increased at pH 7.4 when compared to Eudragit(?)RSPM microparticles. The highest release percent obtained was 1:1 ratio of drug: polymer at pH 1.2 and 7.4. All results clearly suggest that the release properties of diltiazem HCl were improved by using microparticle systems especially which contain chitosan.     

Encapsulation of poorly soluble basic drugs into enteric microparticles: a novel approach to enhance their oral bioavailability

Poorly water soluble basic drugs are very sensitive to pH changes and following dissolution in the acidic stomach environment tend to precipitate upon gastric emptying, which leads to compromised or erratic oral bioavailability. In this work, we show that the oral bioavailability of a model poorly soluble basic drug (cinnarizine) can be improved by drug encapsulation within highly pH-responsive microparticles (Eudragit L). The latter was prepared by emulsion solvent evaporation which yielded discrete spherical microparticles (diameter of 56.4 ± 6.8 μm and a span of 1.2 ± 0.3). These Eudragit L (dissolution threshold pH 6.0) microparticles are expected to dissolve and release their drug load at intestinal conditions. Thus, the enteric microparticles inhibited the in vitro release of drug under gastric conditions, despite high cinnarizine solubility in the acidic medium. At intestinal conditions, the particles dissolved rapidly and released the drug which precipitated out in the dissolution vessel. In contrast, cinnarizine powder showed rapid drug dissolution at low pH, followed by precipitation upon pH change. Oral dosing in rats resulted in a greater than double bioavailability of Eudragit L microparticles compared to the drug powder suspension, although C_max and T_max were similar. The higher bioavailability with microparticles contradicts the in vitro results. Such an example highlights that although in vitro results are an indispensable tool for formulation development, an early in vivo assessment of formulation behaviour can provide better prediction for oral bioavailability.     

Chitosan microparticle preparation for controlled drug release by response surface methodology

The objectives were to investigate the effects of formulation variables on the release of drug and to optimize the formulation of chitosan microparticles loaded with drug for controlled release using response surface methodology. Chitosan microparticles were prepared by dropping a chitosan solution into sodium tripolyphosphate (TPP) through ionic cross-linking. The release behaviour of felodipine as a model drug was affected by preparation variables. A central composite design was used to evaluate and optimize the effect of preparation variables, chitosan concentration (X₁), the pH of the TPP solution (X₂) and cross-linking time (X₃) on the cumulative per cent drug release (Y) in 24 h. Chitosan concentration and cross-linking time affected negatively the release of felodipine, while the pH of the TPP did so positively and was the highest influential factor. The optimum rate of drug release, 100% in 24 h, was achieved at 1.8% chitosan concentration, a pH 8.7 for the TPP solution and 9.7 min cross-linking time.     

Chitosan microparticles containing plasmid DNA as potential oral gene delivery system.

The potential of chitosan as a polycationic gene carrier for oral administration has been explored since 1990s. Chitosan has been shown to effectively bind DNA in saline or acetic acid solution and protect DNA from nuclease degradation. In this study, pDNA (plasmid DNA) was encapsulated in chitosan microparticles. Chitosan-DNA microparticles were prepared using a complex coacervation process and stability of plasmid DNA was investigated in this complex. The chitosan-DNA microparticles could protect the encapsulated plasmid DNA from nuclease degradation. Release of pDNA from microparticles was studied in simulated gastric, simulated intestinal medium and acidic PBS (phosphate buffer saline) (pH 4.5) buffer at 37 degrees C, and released pDNA was assayed spectrophotometrically. In vitro release of pDNA from chitosan microparticles was dependent on pH, as the pH of the release medium increased release profile decreased. In in vivo-animal studies blue color was observed with X-gal (4-chloro-5-bromo-3-indolyl-beta-galactosidase) staining of histological stomach and small intestine sections after oral administration of pDNA-chitosan microparticles as an indicator of exogeneous gene expression.     

Bioavailability of indomethacin from two multiple-units controlled-release formulations

Summary Two multiple-units controlled-release indomethacin capsule formulations containing enteric-coated pellets were bioequivalent to a standard capsule formulation (taken as the reference) in respect of extent of bioavailability in a crossover study with normal human subjects. However, drug absorption from the enteric-coated pellet formulations was slower, when compared to that from the standard reference capsule. The standard reference capsule released 85% of its drug content in vitro during 10 min at pH 6.5 and 98% during 1 h at pH 7.5. One enteric-coated pellet capsule formulation (I) released 77% during 1 h at pH 6.5 and the other (II) released 10% during 1 h at pH 6.5. Release of drug from each capsule of enteric-coated pellets was complete during 1 h at pH 7.5. Although differences in areas under the plasma indomethacin concentration-time curves were not significantly different, the peak plasma levels and the times of their occurrence indicated that the absorption rates of indomethacin decreased in the order, reference formulation > pellet formulation I > pellet formulation II, which was the same rank order as that of their dissolution rates in vitro. The data indicated that multiple units controlled-release formulations represent a reliable and reproducible source of indomethacin, which by avoiding extremes of local or systemic drug concentrations also should be better tolerated by individuals susceptible to unwanted gastrointestinal and centrally-mediated side-effects.     

Novel microparticle drug delivery systems based on chitosan and Eudragit®RSPM to enhance diltiazem hydrochloride release property

The aim of this study was to enhance the release properties of diltiazem hydrochloride (diltiazem HCl) by using microparticle system. For this reason, microparticle drug delivery systems based on chitosan and Eudragit^®RSPM were developed. The microparticles were prepared by using double-emulsion solvent extraction method and the mean sizes of microparticles were less than 120?µm. The in vitro drug release from microparticles was studied in simulated gastric (pH 1.2) and intestinal media (pH 7.4) than the results were evaluated by kinetically. In vitro diltiazem HCl release from microparticles showed good zero order kinetic. For the microparticles with chitosan, the release of diltiazem HCl at pH 1.2 could be effectively sustained, while the release of diltiazem HCl increased at pH 7.4 when compared to Eudragit^®RSPM microparticles. The highest release percent obtained was 1:1 ratio of drug: polymer at pH 1.2 and 7.4. All results clearly suggest that the release properties of diltiazem HCl were improved by using microparticle systems especially which contain chitosan.     

Sustained release of antineoplastic drugs from chitosan-reinforced alginate microparticle drug delivery systems

Alginate based microparticle drug delivery systems were prepared for the sustained release of antineoplastic drugs. Two drugs, 5-fluorouracil (5-FU) and tegafur, were encapsulated into the microparticles. The drug loaded microparticles were fabricated using a very convenient method under very mild conditions, i.e., directly shredding the drug loaded beads into microparticles in a commercial food processor. The mean sizes of the obtained microparticles were between 100 and 200 μm. To effectively sustain the drug release, alginate microparticles were reinforced by chitosan during gelation. The drug release from the chitosan-reinforced alginate microparticles was obviously slower than that from the unreinforced microparticles. The effect of the reinforcement conditions on the drug release property of the microparticles was studied, and the optimized concentration of chitosan solution for reinforcement was identified. The effects of drug feeding concentration and pH value of the release medium on the drug release were investigated.     

An investigation of formulation factors affecting feasibility of alginate-chitosan microparticles for oral delivery of naproxen

In the present work we investigated the feasibility of chitosan treated Ca-alginate microparticles for delivery of naproxen in lower parts of GIT and evaluated influence of formulation factors on their physicochemical characteristics and drug release profiles. Investigated factors were drug/polymer ratio, chitosan molecular weight, chitosan concentration in hardening medium, and hardening time. Sixteen microparticle formulations were prepared utilizing 24 full factorial design (each factor was varied at two levels). Microparticles size varied between 262.3 ± 14.9 and 358.4 ± 21.7 μm with slightly deformed spherical shape. Low naproxen solubility and rapid reaction of ionotropic gelation resulted in high encapsulation efficiency (> 75.19%). Under conditions mimicking those in the stomach, after two hours, less than 6.18% of naproxen was released. Significant influence of all investigated factors on drug release rate was observed in simulated small intestinal fluid. Furthermore, experimental design analysis revealed that chitosan molecular weight and its concentration had the most pronounced effect on naproxen release. Release data kinetics indicated predominant influence of a pH-dependent relaxation mechanism on drug release from microparticles.     

Retained integrity of protein encapsulated in spray-dried chitosan microparticles

Chitosan microparticles for delivery of proteins were prepared by spray-drying technique. The effects of formulation (molecular weight and concentration of chitosan) and process variables (inlet drying air temperature and spray rate) on size and morphology of microparticles were characterized. Size of microparticles was mainly controlled by formulation variables, while particle morphology was influenced by both formulation and process variables investigated in this study. Bovine serum albumin (BSA), as a model protein, was loaded into microparticles at different levels. BSA-loaded chitosan microparticles were characterized in terms of physicochemical properties and integrity of encapsulated protein, which was studied by sodium dodecyl sulphate-polyacrylamide gel electrophoresis and circular dichroism. Size of microparticles ranged between 3.760-8.681 microm, of which BSA-loaded microparticles were larger in size than their corresponding blank microparticles. All microparticles showed dented or distorted surface, especially when BSA was incorporated, with positive surface charge exposed. Burst release of protein was observed. The effect was more pronounced as BSA loading level was increased. Integrity of entrapped protein could be retained when BSA was incorporated at high loading level. In conclusion, chitosan microparticles for delivery of protein could be efficiently prepared by spray-drying technique. The encapsulated protein was capable of retaining its integrity after the preparation process.     

Chitosan and chondroitin microspheres for oral-administration controlled release of metoclopramide.

This study investigated the usefulness of chitosan and chondroitin sulphate microspheres for controlled release of metoclopramide hydrochloride in oral administration. Microspheres were prepared by spray drying of aqueous polymer dispersions containing the drug and different amounts of formaldehyde as cross-linker. Drug release kinetics were investigated in vitro in media of different pH. Chondroitin sulphate microspheres scarcely retarded drug release, regardless of cross-linker concentration and medium pH, and were thus not further characterized. Chitosan microspheres prepared with more than 15% formaldehyde (w/w with respect to polymer) showed good control release (more than 8 h), and release rates were little affected by medium pH. Release from chitosan microspheres prepared with 20% formaldehyde was independent of pH, suggesting that this may be the most appropriate formulation. The size distribution of the chitosan microparticles was clearly bimodal, with the smaller-diameter subpopulation corresponding to microsphere fragments and other particles. Electron microscopy showed the chitosan microspheres to be almost-spherical, though with shallow invaginations. The kinetics of drug release from chitosan microspheres were best fitted by models originally developed for systems in which release rate is largely governed by rate of diffusion through the matrix.     

Preparation and evaluation of microparticles from thiolated polymers via air jet milling

Microparticles were formulated by incorporation of the model protein horseradish peroxidase in (thiolated) chitosan and (thiolated) poly(acrylic acid) via co-precipitation. Dried protein/polymer complexes were ground with an air jet mill and resulting particles were evaluated regarding size distribution, shape, zeta potential, drug load, protein activity, release pattern, swelling behaviour and cytotoxicity. The mean particle size distribution was 0.5-12 microm. Non-porous microparticles with a smooth surface were prepared. Microparticles from (thiolated) chitosan had a positive charge whereas microparticles from (thiolated) poly(acrylic acid) were negatively charged. The maximum protein load for microparticles based on chitosan, chitosan-glutathione (Ch-GSH), poly(acrylic acid) (PAA) and for poly(acrylic acid)-glutathione (PAA-GSH) was 7+/-1%, 11+/-2%, 4+/-0.2% and 7+/-2%, respectively. The release profile of all microparticles followed a first order release kinetic. Chitosan (0.5mg), Ch-GSH, PAA and PAA-GSH particles showed a 31.4-, 13.8-, 54.2- and a 42.2-fold increase in weight, respectively. No significant cytotoxicity could be found. Thiolated microparticles prepared by jet milling technique were shown to be stable and to have controlled drug release characteristics. After further optimizations the preparation method described here might be a useful tool for the production of protein loaded drug delivery systems.     

Enhancement of ursodeoxycholic acid bioavailability by cross-linked sodium carboxymethyl cellulose

The bioavailability of ursodeoxycholic acid from a new formulation based on drug-loaded cross-linked sodium carboxymethyl cellulose was studied in man. The plasma levels of ursodeoxycholic acid were determined by gas chromatography-mass spectrometry after derivatization and sample purification by solid-phase extraction. Capsules containing the drug/polymer system were prepared and compared with conventional commercial ursodeoxycholic acid capsules after single oral administration using a randomized crossover experimental design. Although the drug/polymer system improved the in-vitro dissolution rate of ursodeoxycholic acid in simulated intestinal fluid, statistical evaluation of the area under the plasma concentration curves indicated no significant difference in the extent of bioavailability between the two formulations (14.93+/-4.43 vs 14.95+/-5.79 microM h; P > 0.2). However, following the administration of the ursodeoxycholic acid/cross-linked sodium carboxymethyl cellulose system with an enteric-coated capsule, the mean area under the plasma concentration curve (27.60+/-10.11 microM h) was significantly higher than that obtained after treatment with the commercially available ursodeoxycholic acid capsule (16.24+/-8-38 microM h; P < 0.05). We concluded that improved intestinal absorption of the drug was obtained with enteric-coated capsules filled with the ursodeoxycholic acid/polymer system. Moreover, the simplicity of the preparation and the non-toxicity of the polymer used as the carrier represented additional advantages of this dosage form.     

Studies of chitosan/organic acid/Eudragit RS/RL-coated system for colonic delivery

Prednisolone (PDS) beads were coated sequentially with (i) innermost hydrophobic layer of Eudragit RS/RL, (ii) middle drug release-triggering layer of chitosan, organic acid and Eudragit RS/RL, and (iii) outermost enteric coating layer. Continuous dissolution studies were carried out in artificial gastric fluid (pH 1.2), followed by intestinal fluid (pH 6.8), and finally in colonic fluid (pH 4 and 6) with and without beta-glucosidase. While drug release was prevented in the gastric and small-intestinal fluids, a continuous release was observed in the colonic fluid. Succinic acid provided the fastest rate of release in the colonic fluid compared to citric, tartaric or malic acid. A combined mechanism of drug release is proposed, which considers the swelling of chitosan and Eudragit RS/RL in the presence of succinic acid possibly via electrostatic interaction between the amine groups of chitosan/quaternary ammonium groups of Eudragit RS/RL and the carboxyl groups of succinic acid in aqueous medium. The results of plasma pharmacokinetic studies in Sprague-Dawley rats showed that the developed system provided a significant delay (T(max) 9.3 h) in the absorption profile of PDS compared with simple enteric-coated (T(max) 4 h) or powder (T(max) 1 h) formulation that was taken as proof for the colon-targeted delivery.     

Optimizing formulation factors in preparing chitosan microparticles by spray-drying method

The chitosan only, chitosan/Pluronic F68, chitosan/gelatin, chitosan/Pluronic F68/gelatin microparticles and betamethasone-loaded chitosan/Pluronic F68/gelatin microparticles were successfully prepared by a spray-drying method. Microparticle characteristics (yield rate, zeta potential, particle size and tap density), loading efficiencies, microparticle morphology and in-vitro release properties were investigated. By properly choosing excipient type, concentration and varying the spray-drying parameters, a high degree of control was achieved over the physical properties of the dry chitosan powders. SEM micrograph shows that the particle sizes of the varied chitosan composed microparticles ranged from 2.12-5.67 microm and the external surfaces appear smooth. Using betamethasone as model drug, the spray-drying is a promising way to produce good spherical and smooth surface microparticles with a narrow particle size range for controlled delivery of betamethasone. The positively charged betamethasone-loaded microparticles entrapped in the chitosan/Pluronic F68/gelatin microparticles with trapping efficiencies up to 94.5%, yield rate 42.5% and mean particle size 5.64 microm varied between 4.32-6.20 microm and tap densities 0.128 g/cm(3). The pH of particle was increased with increasing betamethasone-loaded amount, but both zeta potential and tap density of the particles decreased with increasing betamethasone-loaded amount. The betamethasone release rates from chitosan/Pluronic F68/gelatin microparticles were influenced by the drug/polymer ratio in the manner that an increase in the release% and burst release% was observed when the drug loading was decreased. The in vitro release of betamethasone showed a dose-dependent burst followed by a slower release phase that was proportional to the drug concentration in the concentration range between 14-44%w/w.     

Preparation and evaluation of zinc-pectin-chitosan composite particles for drug delivery to the colon: role of chitosan in modifying in vitro and in vivo drug release

Zinc-pectin-chitosan composite microparticles were designed and developed as colon-specific carrier. Resveratrol was used as model drug due to its potential activity on colon diseases. Formulations were produced by varying different formulation parameters (cross-linking pH, chitosan concentration, cross-linking time, molecular weight of chitosan, and drug concentration). Single-step formulation technique was compared with multi-step technique. Effect of these parameters was investigated on shape, size, weight, weight loss (WL), moisture content (MC), encapsulation efficiency (EE), drug loading (L), and drug release pattern of the microparticles. The formulation conditions were optimized from the drug release study. In vivo pharmacokinetics of the zinc-pectinate particles was compared with the zinc-pectin-chitosan composite particles in rats. Formulations were spherical with 920.48-1107.56 μm size, 21.19-24.27 mg weight of 50 particles, 89.83-94.34% WL, 8.31-13.25% MC, 96.95-98.85% EE, and 17.82-48.31% L. Formulation parameters showed significant influence on drug release pattern from the formulations. Formulation prepared at pH 1.5, 1% chitosan, 120 min cross-linking time, and pectin:drug at 3:1 ratio demonstrated colon-specific drug release. Microparticles were stable at 4 °C and room temperature. Pharmacokinetic study indicated in vivo colon-specific drug release from the zinc-pectin-chitosan composite particles only.     

Formulation and in vivo evaluation of chlorhexidine buccal tablets prepared using drug-loaded chitosan microspheres.

This investigation deals with the development of buccal formulations (tablets) based on chitosan microspheres containing chlorhexidine diacetate. The microparticles were prepared by a spray-drying technique, their morphological characteristics were studied by scanning electron microscopy and the in vitro release behaviour was investigated in pH 7.0 USP buffer. Chlorhexidine in the chitosan microspheres dissolves more quickly in vitro than does chlorhexidine powder. The anti-microbial activity of the microparticles was investigated as minimum inhibitory concentration, minimum bacterial concentration and killing time. The loading of chlorhexidine into chitosan is able to maintain or improve the anti-microbial activity of the drug. The improvement is particularly high against Candida albicans. This is important for a formulation whose potential use is against buccal infections. Drug-empty microparticles have an anti-microbial activity due to the polymer itself. Buccal tablets were prepared by direct compression of the microparticles with mannitol alone or with sodium alginate. After their in vivo administration the determination of chlorhexidine in saliva showed the capacity of these formulations to give a prolonged release of the drug in the buccal cavity.     

Enteric-coated tablets improve oral bioavailability of DX-9065, a novel anticoagulant

Oral bioavailability of DX-9065, a factor Xa inhibitor, was only 3% when it was administered as a conventional capsule formulation in fasted humans, and was further reduced to about one-tenth when it was administered to fed humans. The poor absorption of DX-9065 probably resulted from its low membrane permeability and its electrostatic interaction with bile acid. We designed enteric-coated tablets with the expectation that this pharmaceutical technology will prevent DX-9065 from interacting with bile acid. More than 85% of DX-9065 was released from the tablet coated with hypromellose acetate succinate within 10 min in simulated intestinal fluid (pH 6.8). Monkey experiments demonstrated that AUC of DX-9065 after oral administration of its enteric-coated tablet was about 5 times that of its aqueous solution in the fasted state. The food effect on drug absorption was also reduced when DX-9065 was administered as an enteric-coated tablet. The average ratio of AUC in a fed state to that in a fasted state was approximately 0.5, even though the ratio was 0.1 when the enteric-coated tablet was substituted with the drug solution. Enteric coating could be a useful method for improving oral absorption of DX-9065 with reduced food effects on drug absorption.     

Oral delayed-release system based on Zn-pectinate gel (ZPG) microparticles as an alternative carrier to calcium pectinate beads for colonic drug delivery.

A new oral timed-release system was developed for colon-targeted delivery of drugs. The system which consists of ketoprofen-loaded Zn-pectinate gel (ZPG) microparticles together with pectin/dextran mixtures in a tablet form, has been investigated, in vitro, using conditions chosen to simulate the pH and times likely to be encountered during transit to the colon. In order to find the suitable ZPG microparticles, the formulations were prepared by utilizing 2(3) factorial design and the effect of various formulation factors on the release and surface characteristics of the microparticles was studied. The results obtained implied that the release of ketoprofen from ZPG microparticles was greatly extended with the pectinate microparticles, which were prepared with 2.5 or 3% w/v pectin, 2.75% w/v Zn(CH3COO)2 and 2.5% w/v drug. Additionally, the analysis of variance results showed that the release of ketoprofen in simulated intestinal fluid (S.I.F., pH 7.4) was strongly affected by crosslinking agent concentration and initial drug amount, but not particularly affected by the amount of pectin added. The investigated drug concentration factor has significantly increased the drug entrapment efficiency (EE). The optimum colonic drug delivery ZPG/tablet system provided the expected delayed-release sigmoidal patterns with a lag-time of 4.125-4.85 h and t(50%) (the time for 50% of the drug to be released) at 7.45-8.70 h, depending on pectin/dextran ratio employed. The results also demonstrated that the untableted ZPG microparticles exhibited drug release profiles which were able to retard the release of ketoprofen in S.I.F. (pH 7.4) to be 5.28-37.82 times (depending on formulation parameters), lower than the conventional calcium pectinate beads. Therefore, this approach suggests that ZPG microparticles and their modified-release formulations are promising as useful controlled-release carriers for colon-targeted delivery of drugs.