N-isopropylacrylamide copolymers for the preparation of pH-sensitive liposomes and polymeric micelles.

Hydrophobically-modified copolymers of N-isopropylacrylamide bearing a pH-sensitive moiety were investigated for the preparation of pH-responsive liposomes and polymeric micelles. The copolymers having the hydrophobic anchor randomly distributed within the polymeric chain were found to more efficiently destabilize egg phosphatidylcholine (EPC)/cholesterol liposomes than the alkyl terminated polymers. Release of both a highly-water soluble fluorescent contents marker, pyranine, and an amphipathic cytotoxic anti-cancer drug, doxorubicin, from copolymer-modified liposomes was shown to be dependent on pH, the concentration of copolymer, the presence of other polymers such as polyethylene glycol, and the method of preparation. Both polymers were able to partially stabilize EPC liposomes in human serum. These polymers were found to self-assemble to form micelles. The critical association concentration was low (9--34 mg/l) and influenced by the position of the alkyl chains. In phosphate buffered saline, the micelles had a bimodal size distribution with the predominant population having a mean diameter of 35 nm. The polymeric micelles were studied as a delivery system for the photosensitizer aluminum chloride phthalocyanine, (AlClPc), currently evaluated in photodynamic therapy. pH-Responsive polymeric micelles loaded with AlClPc were found to exhibit increased cytotoxicity against EMT-6 mouse mammary cells in vitro than the control Cremophor EL formulation.     

Enhanced antitumor effect of camptothecin loaded in long-circulating polymeric micelles.

A water-insoluble antitumor agent, camptothecin (CPT) was successfully incorporated into polymeric micelles formed from poly(ethylene glycol)-poly(benzyl aspartate) block copolymers (CPT-loaded polymeric micelles). Antitumor effects and biodistribution of CPT-loaded micelles were evaluated in mice subcutaneously transplanted by colon 26 tumor cells. Tumor growth was significantly inhibited after a single i.v. injection of CPT-loaded polymeric micelles at doses of either 15 or 30 mg/kg. Efficacy of a single high-dose injection was comparable to low dose multiple injections. CPT loaded in polymeric micelles showed prolonged blood circulation and higher accumulation in tumors compared with CPT in solution. Polymeric micelle systems offer a stable and effective platform for cancer chemotherapy with CPT.     

Spermine modified polymeric micelles with pH-sensitive drug release for targeted and enhanced antitumor therapy

Tumor targeting delivery of chemotherapeutic drugs by nanocarriers has been demonstrated to be a promising strategy for cancer therapy with improved therapeutic efficacy. In this work, we reported a novel type of active targeting micelle with pH-responsive drug release by using biodegradable poly(lactide)-poly(2-ethyl-2-oxazoline) di-block copolymers functionalized with spermine (SPM). SPM has been considered as a tumor binding ligand through its specific interaction with the polyamine transport system (PTS), a transmembrane protein overexpressed on various types of cancer cell, while its application in nano-drug delivery systems has rarely been explored. The micelles with spherical shape (∼110 nm) could load hydrophobic paclitaxel (PTX) with high capacity, and release the payload much faster at acidic pH (4.5–6.5) than at pH 7.4. This pH-responsive property assisted the rapid escape of drug from the endo/lysosome after internalization as demonstrated by confocal laser scanning microscopy images using coumarin-6 (Cou-6) as a fluorescent probe. With surface SPM modification, the micelles displayed much higher cellular uptake than SPM lacking micelles in various types of cancer cells, demonstrating tumor targeting ability. The uptake mechanism of SPM modified micelles was explored by flow cytometry, which suggested an energy-consuming sag vesicle-mediated endocytosis pathway. As expected, the micelles displayed significantly enhanced anti-cancer activity. This work demonstrates that SPM modified pH-sensitive micelles may be potential drug delivery vehicles for targeting and effective cancer therapy.

Tumor targeting delivery of SPM functionalized micelles via PTS binding and their endocytosis and pH-triggered endo/lysosome drug release for anti-cancer therapy.     

Thermosensitive and biodegradable polymeric micelles for paclitaxel delivery.

The preparation, release and in vitro cytotoxicity of a novel polymeric micellar formulation of paclitaxel (PTX) were investigated. The micelles consisted of an AB block copolymer of poly(N-(2-hydroxypropyl) methacrylamide lactate) and poly(ethylene glycol) (pHPMAmDL-b-PEG). Taking advantage of the thermosensitivity of pHPMAmDL-b-PEG, the loading was done by simply mixing of a small volume of a concentrated PTX solution in ethanol and an aqueous polymer solution and subsequent heating of the resulting solution above the critical micelle temperature of the polymer. PTX could be almost quantitatively loaded in the micelles up to 2 mg/mL. By dynamic light scattering and cryo-transmission electron microscopy, it was shown that PTX-loaded micelles have a mean size around 60 nm with narrow size distribution. At pH 8.8 and 37 degrees C, PTX-loaded micelles destabilized within 10 h due to the hydrolysis of the lactic acid side group of the pHPMAmDL. Because the hydrolysis of the lactic acid side groups is first order in hydroxyl ion concentration, the micelles were stable for about 200 h at physiological conditions. The presence of serum proteins did not have an adverse effect on the stability of the micelles during at least 15 h. Interestingly, the dissolution kinetics of pHPMAmDL-b-PEG micelles was retarded by incorporation of PTX, indicating a strong interaction between PTX and the pHPMAmDL block. The PTX-loaded micelles showed a release of the incorporated 70% of PTX during 20 h at 37 degrees C and at pH 7.4. PTX-loaded pHPMAmDL-b-PEG micelles showed comparable in vitro cytotoxicity against B16F10 cells compared to the Taxol standard formulation containing Cremophor EL, while pHPMAmDL-b-PEG micelles without PTX were far less toxic than the Cremophor EL vehicle. Confocal laser-scanning microscopy (CLSM) and fluorescence activated cell sorting (FACS) analysis of fluorescently labelled micelles showed that pHPMAmDL-b-PEG micelles were internalized by the B16F10 cells. The present results suggest that pHPMAmDL-b-PEG block copolymer micelles are a promising delivery system for the parenteral administration of PTX.     

PEG shielded polymeric double-layered micelles for gene delivery.

A combination of A-B and B-C block copolymers was used to encapsulate DNA inside pEG coated particles, where A is a cationic block (poly(dimethylaminoethyl methacrylate), pDMAEMA) for DNA binding and condensation, B is a hydrophobic block (poly(butylmethacrylate), pBMA) and C is a polyethylene glycol (pEG) block. The AB and BC block copolymers were synthesized by transition metal mediated radical polymerization. The AB block copolymer had a fixed pBMA molecular weight of 3800 g/mol and a varying pDMAEMA molecular weight (from 22 to 65 kg/mol), the BC block copolymer had a fixed composition (pBMA 9000 g/mol; pEG 2000 g/mol). Plasmid DNA containing particles were made via a detergent dialysis method. By this method, particles of approximately 120 nm, as determined by dynamic light scattering (DLS), with a near neutral charge were formed, independent of the DMAEMA block size. DLS measurements and gel electrophoresis indicated that the particles were very stable in cell culture medium at 37 degrees C and resistant to anionic exchange by poly-l-aspartic acid. The particles were able to transfect COS-7 and OVCAR-3 cells with minor toxicity if incubated for 1 or 4 h; incubation for 24 h resulted in an increased toxicity. This paper shows that small polyplexes with near neutral charge can be obtained via a convenient detergent dialysis method using pDMAEMA-b-pBMA and pBMA-b-pEG. These particles may be interesting for in vivo experiments where particles with high positive charges have adverse interactions with blood components.     

Drug release characteristics of unimolecular polymeric micelles.

Biodegradable, unimolecular polymeric micelles possess several features that are attractive for drug delivery applications: Thermodynamic stability, ability to encapsulate and solubilize a hydrophobic guest molecule, biodegradability, as well as size and surface characteristics that prevent rapid clearance by the RES. Here we investigate the potential of these unimolecular polymeric micelles to release a drug for an extended time. Lidocaine was used as a model drug for in vitro studies using a horizontal diffusion cell and cellulose membrane that prevented polymer transport from the source to the receiver compartment. The transport of free lidocaine from source to receiver under sink conditions was zero-order and complete within 8 h. The transport of lidocaine initially encapsulated in polymer was zero-order for the first 14 h, and 96% of the lidocaine was detected within 24 h.     

Modified polyvinylalcohol for encapsulation of all-trans-retinoic acid in polymeric micelles.

All-trans-retinoic acid (ATRA) is now included in many antitumor therapeutic schemes for the treatment of acute promyelocytic leukaemia, Kaposi's sarcoma, head and neck squamous cell carcinoma, ovarian carcinoma, bladder cancer and neuroblastoma. Unfortunately its poor aqueous solubility hampers its parenteral formulation. To date, there is no parenteral formulation of ATRA commercially available and oral administration of ATRA is associated with progressively diminishing ATRA levels in plasma, which is related to induction of retinoic acid-binding protein and increased drug catabolism by cytochrome P-450-mediated reaction. An ATRA formulation, obtained by complexation of the drug into polymeric micelles, might be suitable for parenteral administration overcoming these unwanted effects. To this purpose we prepared an amphiphilic polymer by polyvinylalcohol (PVA) substitution with oleyl amine at 1.5% substitution degree (mol substituent per 100 mol hydroxyvinylmonomer) and evaluated its functional properties with regard to ATRA complexation. The substituted polymer displayed ability to interact with ATRA both in aqueous solution and in the solid state following spray-drying of drug-polymer hydro-alcoholic solutions. The spray-dried complexes rapidly dissolved in water providing high levels of ATRA solubilization as a function of the drug-polymer weight ratio. The complexes characterized by 1:5 drug-polymer weight ratio provided higher levels of ATRA solubilization than 1:3 and 1:10 drug-polymer weight ratios respectively. Pre-formed polymeric micelles in water equilibrated in the presence of excess solid ATRA provided the lowest levels of solubilization. The drug release from the complexes was very slow in PBS, indicating their suitability in antitumor drug targeting where a fundamental requirement is stability towards drug release for at least 24 h, corresponding to the average circulation time period of macromolecular carriers. The cytotoxicity studies against neuroblastoma cell lines outlined increased cytotoxicity of complexed ATRA with respect to free ATRA, likely due to the increased bioavailability of the hydrophobic drug from the complex. We conclude that ATRA entrapped into self-assembling polymer micelles may be a useful parenteral ATRA formulation overcoming the unwanted pharmacological mechanism that lead to acquired retinoid resistance.     

Molecular design of biodegradable polymeric micelles for temperature-responsive drug release.

We designed thermo-responsive and biodegradable polymeric micelles for an ideal drug delivery system whose target sites are where external stimuli selectively release drugs from the polymeric micelles. The thermo-responsive micelles formed from block copolymers that were composed both of a hydrophobic block and a thermo-responsive block. Poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) showing a lower critical solution temperature (LCST) around 40 degrees C was synthesized for the thermo-responsive block, while biodegradable poly(D,L-lactide), poly(epsilon-caprolactone), or poly(D,L-lactide-co-epsilon-caprolactone) was used for the hydrophobic block. By changing both the block lengths of the poly(D,L-lactide)-containing block copolymers, physical parameters such as micelle diameter and critical micelle concentration were varied. On the other hand, the choice of the hydrophobic block was revealed to be critical in relation to both on the thermo-responsive release of the incorporated anti-cancer drug, doxorubicin, and the temperature-dependent change of the hydrophobicity of the micelles' inner core. One polymeric micelle composition successfully exhibited rapid and thermo-responsive drug release while possessing a biodegradable character.     

Doxorubicin-conjugated biodegradable polymeric micelles having acid-cleavable linkages.

Doxorubicin was chemically conjugated to the terminal end of a di-block copolymer composed of poly(L-lactic acid) (PLLA) and methoxy-poly(ethylene glycol) (mPEG) via two acid-cleavable linkages. A hydrazone bond and a cis-acotinyl bond were formed between doxorubicin and the terminal group of PLLA segment in the block copolymer. Doxorubicin-conjugated PLLA-mPEG di-block copolymers self-assembled to form micelles in aqueous solution. The doxorubicin-conjugated micelles were about 89.1 nm in diameter and their critical micelle concentration was 1.3 microg/ml. These values were comparable with those of unconjugated micelles. In an acidic condition, the conjugated doxorubicin in the hydrazone linkage was readily cleaved, releasing doxorubicin in an intact structure. Doxorubicin-conjugated PLLA-mPEG micelles were more potent in cell cytotoxicity than free doxorubicin, suggesting that they were more easily taken up within cells with concomitant rapid release of cleaved doxorubicin into the cytoplasm from acidic endosomes.     

Folate receptor targeted biodegradable polymeric doxorubicin micelles.

Biodegradable polymeric micelles, self-assembled from a di-block copolymer of poly(D,L-lactic-co-glycolic acid) (PLGA) and poly(ethylene glycol) (PEG), were prepared to achieve folate receptor targeted delivery of doxorubicin (DOX). In the di-block copolymer structure of PLGA-b-PEG, DOX was chemically conjugated to a terminal end of PLGA to produce DOX-PLGA-mPEG, and folate was separately conjugated to a terminal end of PEG to produce PLGA-PEG-FOL. The two di-block copolymers with different functional moieties at their chains ends were physically mixed with free base DOX in an aqueous solution to form mixed micelles. It was expected that folate moieties were exposed on the micellar surface, while DOX was physically and chemically entrapped in the core of micelles. Flow cytometry and confocal image analysis revealed that folate conjugated mixed micelles exhibited far greater extent of cellular uptake than folate unconjugated micelles against KB cells over-expressing folate receptors on the surface. They also showed higher cytotoxicity than DOX, suggesting that folate receptor medicated endocytosis of the micelles played an important role in transporting an increased amount of DOX within cells. In vivo animal experiments, using a nude mice xenograft model, demonstrated that when systemically administered, tumor volume was significantly regressed. Biodistribution studies also indicated that an increased amount of DOX was accumulated in the tumor tissue.     

靶向VEGF基因的siRNA联合树突状细胞介导的CTL对MCF-7细胞作用的研究

目的探讨靶向血管内皮细胞生长因子(VEGF)基因的小干扰RNA(siRNA)联合负载肿瘤抗原的树突状细胞(DC)致敏的细胞毒性T淋巴细胞(CTL)的联合抗瘤作用。方法体外应用靶向VEGF基因最佳转染浓度(100nmol/L,增加浓度不再提高沉默作用)的siRNA联合负载人乳腺癌细胞(MCF-7细胞)抗原的DC介导的CTL(siRNAVEGF+CTL组)共同作用于MCF-7细胞,同时设立空白对照组和空白+CTL组(只加无血清无抗生素培养基);脂质体组和脂质体+CTL组(只加LipofectamineTM2000);siRNAVEGF-组(100nmol/LsiRNA);siRNASCR组和siR-NASCR+CTL组(100nmol/LsiRNASCR),每组做6个平行孔,四甲基偶氮唑蓝(MTT)法检测siRNAVEGF+CTL组和各对照组肿瘤杀伤活性(n=6),Hoechst33258核染色观察细胞的凋亡(n=3)。结果siRNAVEGF+CTL组、siR-NAVEGF-组siRNASCRCTL组肿瘤杀伤活性分别为99.37%,51.17%和43.94%,siRNAVEGF+CTL组与对照组比较可明显杀伤肿瘤细胞,瘤细胞几乎完全溶解,Hoechst33258显示细胞核呈明显的细胞凋亡改变。结论体外实验显示靶向VEGF的siRNA联合负载肿瘤抗原DC致敏的CTL能有效抑制乳腺癌MCF-7细胞的生长,二者的联合应用抗瘤效果显著。     

DPD simulations on morphologies and structures of blank PLGA-b-PEG-b-PLGA polymeric micelles and docetaxel-loaded PLGA-b-PEG-b-PLGA polymeric micelles

Dissipative particle dynamics (DPD) simulation was used to study the morphologies and structures of blank (no drug) poly(lactic-co-glycolic acid)-b-poly(ethylene glycol)-b-poly(lactic-co-glycolic acid) (PLGA-b-PEG-b-PLGA) polymeric micelles and the docetaxel (Dtx)-loaded PLGA-b-PEG-b-PLGA polymeric micelles. We focused on the influences of PLGA-b-PEG-b-PLGA copolymer concentration, composition, Dtx drug content and the shear rate on morphologies and structures of the micelles. Our simulations show that the PLGA-b-PEG-b-PLGA copolymers in the aqueous solutions could aggregate and form blank micelles while Dtx drug and PLGA-b-PEG-b-PLGA could aggregate and form drug-loaded micelles. Under different PLGA-b-PEG-b-PLGA concentrations and drug content, the blank and drug-loaded micelles are observed as spherical, onionlike, columnar, and lamellar structures. The onionlike structures are comprised of the PEG hydrophilic core, the PLGA hydrophobic middle layer, and the PEG hydrophilic shell. As the structure of micelles varies from a spherical core–shell structure to a core–middle layer–shell onionlike structure, the distribution of the Dtx drugs diffuses from the core to the PLGA middle layer of the aggregate. In addition, the drug release process of the Dtx-loaded micelles under shear flow is also simulated. And the results show that the spherical micelles turn into a columnar structure under a shear rate from 0.2 to 3.4. When the shear rate increases to 3.5, the Dtx drugs released gradually increase until all are released with time evolution. These findings illustrate the dependence of the structural morphologies on the detailed molecular parameters of PLGA-b-PEG-b-PLGA and Dtx.

Dissipative particle dynamics simulation was used to study the morphologies and structures of blank (no drug) poly(lactic-co-glycolic acid)-b-poly(ethylene glycol)-b-poly(lactic-co-glycolic acid) polymeric micelles and the docetaxel-loaded polymeric micelles.     

Hydrotropic agents for study of in vitro paclitaxel release from polymeric micelles.

A new experimental method for in vitro release studies of poorly soluble drugs from polymeric micelle systems was developed using a hydrotropic agent, sodium salicylate. It is difficult to maintain a good sink condition for poorly water-soluble drugs, such as paclitaxel (PTX), because of their low aqueous solubility. In this study, a good sink condition for PTX was achieved by using aqueous sodium salicylate solution which solubilized more than 10 times the total amount of PTX incorporated in polymeric micelles. Sodium salicylate at 1 M concentration increased the aqueous PTX solubility by 100 times without destroying the micellar structure of poly(ethylene glycol)-block-poly(phenylalanine) (PEG-b-PPhe) copolymer. PTX was continuously released from PEG-b-PPhe micelles in the hydrotropic release medium. The hydrotropic solution presents a simple method for studying in vitro release behavior of poorly soluble drugs from polymeric micelles in aqueous media.