Preparation of sodium alginate microspheres containing hydrophilic β-lactam antibiotics

Alginate microspheres were prepared by the emulsification process as a drug delivery system of ampicillin sodium (AMP-Na). The preparation parameters such as the concentration of calcium chloride, the stirring time and the amount of AMP-Na were investigated. The alginate microspheres containing hydroxypropylmethylcellulose (HPMC) were found to be generally spherical, discrete and had smoother surfaces when compared to without HPMC. However, there was no significant difference in the release profile of AMP-Na from alginate microspheres prepared with or without HPMC. The concentration of calcium chloride solution and the stirring time in the preparation of alginate microspheres influenced the aggregation of alginate microspheres. The amount of AMP-Na in alginate microspheres influenced the surface morphology and the practical drug content in microspheres.     

Mucoadhesive microspheres for nasal administration of cyclodextrins

The aim of this study was to examine the in vitro capacity of cyclodextrins to interfere on the β-amyloid fibril formation; then, mucoadhesive microspheres containing cyclodextrins were prepared and characterised as nasal delivery system for brain targeting. Eight batches of microspheres containing chitosan or alginate loaded with β-cyclodextrin or hydroxypropyl-β-cyclodextrin in two different cyclodextrin to polymer ratios were produced by spray drying. The results show that none of the tested CDs has direct cellular toxicity and they protect the cell viability from β-peptide. The microspheres prepared are characterised by small particle sizes, ability to absorb water and to delay the in vitro dissolution rate of the CDs; good ex vivo mucoadhesive properties of the formulations are assessed. The microsphere properties are influenced by the kind of polymer, of cyclodextrin and by cyclodextrin to polymer ratio used. In particular, the alginate formulation containing the higher cyclodextrin content shows the best performance.     

Formation of alginate microspheres produced using emulsification technique

This study investigated the formative process of alginate microspheres produced using an emulsification technique. The alginate microspheres were produced by cross-linking alginate globules dispersed in a continuous organic phase using various calcium salts: calcium chloride, calcium acetate, calcium lactate and calcium gluconate. The size, shape, drug content and Ca2+ content of the microspheres were evaluated. The tack, viscosity and pH of the calcium salt solution and percentage of Ca2+ partitioned into the organic phase were determined. Microscopic examination of the test emulsion at various stages of the emulsification process was also carried out. The propensity of cross-linking reaction was found to be dependent on successful collision between alginate and calcium salt globules. Examination of the characteristics of microspheres indicated that the formed microsphere was a resultant product of alginate globule clustering. The growth propensity of microspheres was promoted by the higher rate and extent of cross-linkage which was governed by the pH, tack and/or Ca2+ content of the cross-linking solution, as well as the dissociation constant and diffusivity of the calcium salt. Overall, the amount of free Ca2+ cross-linked with alginate in the formed microspheres was in the following order: calcium acetate > calcium chloride + calcium acetate > calcium chloride + calcium gluconate; calcium chloride + calcium lactate > calcium chloride. In microencapsulation by emulsification, the mean size of the microspheres produced can be modified by varying the tack, pH and Ca2+ content of the cross-linking solution and through the use of a combination of calcium salts. The shape of the microspheres produced was, nonetheless, unaffected by the physicochemical properties of the cross-linking solution.     

Formation of alginate microspheres produced using emulsification technique

This study investigated the formative process of alginate microspheres produced using an emulsification technique. The alginate microspheres were produced by cross-linking alginate globules dispersed in a continuous organic phase using various calcium salts: calcium chloride, calcium acetate, calcium lactate and calcium gluconate. The size, shape, drug content and Ca²⁺ content of the microspheres were evaluated. The tack, viscosity and pH of the calcium salt solution and percentage of Ca²⁺ partitioned into the organic phase were determined. Microscopic examination of the test emulsion at various stages of the emulsification process was also carried out. The propensity of cross-linking reaction was found to be dependent on successful collision between alginate and calcium salt globules. Examination of the characteristics of microspheres indicated that the formed microsphere was a resultant product of alginate globule clustering. The growth propensity of microspheres was promoted by the higher rate and extent of cross-linkage which was governed by the pH, tack and/or Ca²⁺ content of the cross-linking solution, as well as the dissociation constant and diffusivity of the calcium salt. Overall, the amount of free Ca²⁺ cross-linked with alginate in the formed microspheres was in the following order: calcium acetate > calcium chloride + calcium acetate > calcium chloride + calcium gluconate; calcium chloride + calcium lactate > calcium chloride. In microencapsulation by emulsification, the mean size of the microspheres produced can be modified by varying the tack, pH and Ca²⁺ content of the cross-linking solution and through the use of a combination of calcium salts. The shape of the microspheres produced was, nonetheless, unaffected by the physicochemical properties of the cross-linking solution.     

Chitosan-coated alginate microspheres for embolization and/or chemoembolization: In vivo studies

In this study, chitosan-coated alginate microspheres were prepared by the ionic complexation of alginate and chitosan biopolymers to use in embolization and/or chemoembolization studies. Biopolymeric microspheres were prepared by the ionic gelation technique of alginate with a suitable divalent cation (i.e. CaCl₂) in a suspension medium composed of mineral oil and petroleum ether including emulsifier (i.e. Tween-80) and then obtained microspheres were coated with chitosan in an aqueous chitosan solution while the medium was magnetically stirred. The obtained microspheres are in the size range of 100–400?µm and they can be prepared as required by changing the preparation conditions (i.e. stirring rate, concentration of biopolymers, molecular weight and concentration of chitosan, etc.). In the in vivo studies, New Zealand rabbits were used as the test animals. Both complete and partial embolization of the kidney were achieved by using the microspheres. The renal angiograms obtained before/after embolization and the histopathological observations showed the feasibility of the chitosan-coated alginate microspheres as an alternative embolization and/or chemoembolization agent.     

Microencapsulation of hemoglobin in chitosan-coated alginate microspheres prepared by emulsification/internal gelation

Chitosan-coated alginate microspheres prepared by emulsification/internal gelation were chosen as carriers for a model protein, hemoglobin (Hb), owing to nontoxicity of the polymers and mild conditions of the method. The influence of process variables related to the emulsification step and microsphere recovering and formulation variables, such as alginate gelation and chitosan coating, on the size distribution and encapsulation efficiency was studied. The effect of microsphere coating as well its drying procedure on the Hb release profile was also evaluated. Chitosan coating was applied by either a continuous microencapsulation procedure or a 2-stage coating process. Microspheres with a mean diameter of less than 30 microm and an encapsulation efficiency above 90% were obtained. Calcium alginate cross-linking was optimized by using an acid/CaCO(3) molar ratio of 2.5, and microsphere-recovery with acetate buffer led to higher encapsulation efficiency. Hb release in gastric fluid was minimal for air-dried microspheres. Coating effect revealed a total release of 27% for 2-stage coated wet microspheres, while other formulations showed an Hb release above 50%. Lyophilized microspheres behaved similar to wet microspheres, although a higher total protein release was obtained with 2-stage coating. At pH 6.8, uncoated microspheres dissolved in less than 1 hour; however, Hb release from air-dried microspheres was incomplete. Chitosan coating decreased the release rate of Hb, but an incomplete release was obtained. The 2-stage coated microspheres showed no burst effect, whereas the 1-stage coated microspheres permitted a higher protein release.     

Effect of PLGA hydrophilia on the drug release and the hypoglucemic activity of different insulin-loaded PLGA microspheres

The effects of viscosity and hydrophilic characteristics of different PLGA polymers on the microencapsulation of insulin have been studied in vitro and in vivo after subcutaneous administration to hyperglycemic rats. Hydrophilic PLGA polymers produced a higher burst effect than the hydrophobic ones. Moreover, an incomplete insulin release was observed with the hydrophilic PLGA polymers in comparison with the hydrophobic ones. An explanation for that incomplete release can be the development of polymer-insulin interactions associated to the polymer hydrophilic/hydrophobic character, as detected by DSC analysis. Differences in the release rate of microsphere formulations lead to differences in the hypoglycemic action and the weight of animals. Hydrophobic PLGA was able to prolong the hypoglycemic action up to 4 weeks which is at least double than that obtained with hydrophilic PLGA of a similar viscosity. Comparing insulin microspheres with an immediate release formulation, microspheres can increase insulin relative bioavailability up to four times.     

Microencapsulation of lipophilic drugs in chitosan-coated alginate microspheres.

Chitosan-coated alginate microspheres containing a lipophilic marker dissolved in an edible oil, were prepared by emulsification/internal gelation and the potential use as an oral controlled release system investigated. Microsphere formation involved dispersing a lipophilic marker dissolved in soybean oil into an alginate solution containing insoluble calcium carbonate microcrystals. The dispersion was then emulsified in silicone oil to form an O/W/O multiple phase emulsion. Addition of an oil soluble acid released calcium from carbonate complex for gelation of the alginate. Chitosan was then applied as a membrane coat to increase the mechanical strength and stabilize the microspheres in simulated intestinal media. Parameters studied included encapsulation yield, alginate concentration, chitosan molecular weight and membrane formation time. Mean diameters ranging from 500 to 800 micron and encapsulation yields ranging from 60 to 80% were obtained. Minimal marker release was observed under simulated gastric conditions, and rapid release was triggered by transfer into simulated intestinal fluid. Higher overall levels of release were obtained with uncoated microspheres, possibly due to binding of marker to the chitosan membrane coat. However the slower rate of release from coated microspheres was felt better suited as a delivery vehicle for oil soluble drugs.     

Sodium alginate microspheres of metformin HCl: formulation and in vitro evaluation

Metformin microspheres with sodium alginate alone and in combination with gellan were prepared using an emulsion-cross linking method. The prepared microspheres were evaluated for their physico-chemical characteristics like particle size, morphology using SEM, incorporation efficiency, equilibrium water content (swelling) and in vitro drug release. The effect of various formulation variables like polymer concentration (sodium alginate; and proportion of gellan in microspheres prepared by a combination of sodium alginate and gellan), drug loading, crosslinking agent concentration and cross-linking time on the in vitro dissolution of the prepared microspheres were evaluated. The results showed that both the particle size and the incorporation efficiency were proportional to the polymer concentration. In case of microspheres containing both sodium alginate and gellan, the mean diameter and the incorporation efficiency were higher than the corresponding microspheres containing only alginate, both increasing with an increase in proportion of gellan. The prepared microspheres were found to be discrete and spherical in shape and were successful in sustaining the drug release for 8 hours. Incorporation of gellan caused a significant decrease in drug release. The release followed a biphasic profile, in all cases, characterized by an initial phase of moderate drug release followed by a phase of higher release. Further, the kinetic treatment of the dissolution data revealed the prevalence of matrix diffusion kinetics.     

Enhanced oral bioavailability of calcium using bovine serum albumin microspheres

Low oral bioavailability of calcium leads to impairment of calcium homeostasis particularly during the high requirement phases of human growth. The objective of the current study was to prepare microspheres of calcium using bovine serum albumin and assess its viability to enhance the oral bioavailability. Microspheres of calcium were prepared by emulsion chemical cross linking method, characterized, evaluated for in vitro release and in vivo absorption. The prepared microspheres were found to be spherical in shape with smooth surface. High entrapment efficiency (>50%), desired particle size (<10 µm), high zeta potential values (?30.91?±?3.06 to ?34.65?±?1.01 mV) and low polydispersity indices (0.61?±?0.04 to 0.88?±?0.05) were recorded in the prepared microspheres. In vitro release profile suggests that <10% of calcium was discharged in the gastric media (in 30?min) from the microspheres prepared using higher drug/polymer ratio (1:1, formulation F4). The pharmacokinetic data obtained in Sprague–Dawley rats showed that the rate and extent of calcium absorption was significantly enhanced following the administration of microspheres. The serum calcium level profiles indicate that the C_max and AUC_0–α were significantly higher (p < 0.001) when calcium was administered from microspheres when compared to control. Rapid absorption of calcium was also observed from microspheres and may be attributed to a greater uptake into intestinal Peyer’s patches. Given the excellent results in the in vivo studies, it can be concluded that calcium loaded bovine serum albumin microspheres could be an effective and promising approach for the oral therapy of calcium. Indeed, this approach can be an alternative to parenteral therapy in acute hypocalcaemia as well.     

α-细辛脑海藻酸钙微球的制备及体外释放药物考察

目的研究α-细辛脑海藻酸钙微球的制备工艺,测定微球中α-细辛脑的体外释放度。方法采用乳化-内部凝胶化法制备海藻酸钙微球,正交试验设计优化制备工艺,分光光度法测定α-细辛脑的含量。结果最优工艺微球球形圆整,载药量为1.17%,包封率为2.40%,微球的平均粒径为17.97μm,大部分微球粒径分布在7~30μm（93.67%）,体外释放符合双相动力学方程Q/100=0.8276-0.0506exp（-1909t）-0.777exp（-0.4405t）。结论以海藻酸钠为载体、乳化-内部凝胶化法制备了海藻酸钙微球,获得微球制备工艺。     

Recent advances and perspectives on coated alginate microspheres for modified drug delivery

BACKGROUND: Alginate microspheres represent a useful tool for modified drug delivery. Their preparation is quite easy and is usually based on the gelling properties of the polysaccharide in the presence of divalent ions; nevertheless, microparticles prepared only with calcium alginate show several problems, mainly related to the mechanical stability and to the release that, in most cases, is too fast. To overcome such inconveniences, polymer-coated alginate microspheres and/or appropriately interpenetrating polymer network (semi-IPNs and IPNs) structures formed with alginate and other macromolecules were developed. OBJECTIVE: This article reports a synthetic overview on the most recent searches carried out on coated alginate microspheres. METHODS: After a section focused on the microsphere preparation, this article is divided into several main topics related to the specific polymer that was used as a coating material to provide a rationale in reporting literature data. In the last section, the advantages and disadvantages of the various approaches are discussed and the authors' opinion on perspectives for further studies and novel applications of coated alginate microspheres are reported. CONCLUSION: Ca(2+)-alginate microparticles could experience a new era if scientists will increase their efforts in developing microparticles with smart properties.     

Cross-linking mechanisms of calcium and zinc in production of alginate microspheres

Calcium chloride and zinc sulphate were used to cross-link alginate microspheres prepared by an emulsification method. The microspheres cross-linked by a combination of these two salts showed different morphology and slower drug release compared with those cross-linked by the calcium salt alone. From viscosity study, it was found that zinc cations interacted with the alginate molecules to a greater extent than calcium cations. The varying effects of the salts on the properties of the microspheres were largely attributed to their ability to interact with the alginate molecules.     

Influence of partially cross-linked alginate used in the production of alginate microspheres by emulsification

Spherical and discrete calcium alginate microspheres had been produced by the emulsification technique. The microencapsulation process was highly efficient, but drug release from microspheres was rapid. A more orderly chain arrangement of the polymeric chains would give rise to a stronger and less permeable matrix capable of sustaining drug release. Therefore, the potential of using partially cross-linked alginate in the production of microspheres by emulsification was explored. The size and roundness of the microspheres, its drug content and drug release property were determined. The more viscous alginate solutions when reacted with more calcium salt added resulted in larger microspheres produced. Microspheres made from partially cross-linked alginate exhibited lower drug content and higher T75% values in drug release studies. This was due to decreased flexibility of the polymer chains which were partially held together by calcium ions, reducing subsequent interaction with the calcium ions resulting in lower drug entrapment efficiency and a more permeable microsphere matrix.     

Alginate microspheres prepared by internal gelation: development and effect on insulin stability

Recombinant human insulin was encapsulated within alginate microspheres by the emulsification/internal gelation technique with the objective of preserving protein stability during encapsulation procedure. The influence of process and formulation parameters was evaluated on the morphology and encapsulation efficiency of insulin. The in vitro release of insulin from microspheres was studied under simulated gastrointestinal conditions and the in vivo activity of protein after processing was assessed by subcutaneous administration of extracted insulin from microspheres to streptozotocin-induced diabetic rats. Microspheres mean diameter, ranging from 21 to 287 microm, decreased with the internal phase ratio, emulsifier concentration, mixer rotational speed and increased with alginate concentration. Insulin encapsulation efficiency, near 75%, was not affected by emulsifier concentration, mixer rotational speed and zinc/insulin hexamer molar ratio but decreased either by increasing internal phase ratio and calcium/alginate mass ratio or by decreasing acid/calcium molar ratio and alginate concentration. A high insulin release, above 75%, was obtained at pH 1.2 and under simulated intestinal pH a complete dissolution of microspheres occurred. Extracted insulin from microspheres decreased hyperglycemia of diabetic rats proving to be bioactive and showing that encapsulation in alginate microspheres using the emulsification/internal gelation is an appropriate method for protein encapsulation.     

Development,optimization and in vitro evaluation of alginate mucoadhesive microspheres of carvedilol for nasal delivery

Abstract

The present research work was aimed at development and optimization of alginate mucoadhesive microspheres of carvedilol for nasal delivery to avoid first pass metabolism and to improve the therapeutic efficacy in the treatment of hypertension and angina pectoris. The microspheres were prepared by a water-in-oil (w/o) emulsification technique. A 2³ factorial design was employed with drug : polymer ratio, calcium chloride concentration and cross-linking time as independent variables while particle size of the microspheres and in vitro mucoadhesion were the dependent variables. Regression analysis was performed to identify the best formulation conditions. Particle size was analysed by dynamic laser light diffraction technique and found to be in the range of 26.36–54.32 µm, which is favourable for intranasal absorption. The shape and surface characteristics were determined by scanning electron microscopy (SEM) which depicted the spherical nature and nearly smooth surfaces of the microspheres. The percentage encapsulation efficiency was found to be in the range between 36.62–56.18. In vitro mucoadhesion was performed by adhesion number using sheep nasal mucosa and was observed in a range from 69.25–85.28. Differential scanning calorimetry and X-ray diffraction results indicated a molecular level dispersion of carvedilol in the microspheres. In vitro release studies in pH 6.2 phosphate buffer indicated non-Fickian or anomalous type of transport for the release of carvedilol from the microspheres.     

海藻酸-壳聚糖-聚乳酸羟乙醇酸复合微球的制备及其对蛋白释放的调节

目的制备蛋白的海藻酸-壳聚糖-聚乳酸羟乙醇酸(PLGA)复合微球，以增加蛋白药物的包封率、减少突释和不完全释放。方法以牛血清白蛋白为模型药物采用修饰的乳化、醇洗法制备小粒径海藻酸微囊，再以壳聚糖孵育制得海藻酸-壳聚糖双层微囊，并进一步用PLGA包裹制得复合微球。采用微量BCA试剂盒测定蛋白浓度，考察其包封率及释放行为，改变各种制备因素调节微球的释放特性。结果复合微球粒径约30 μm，形态圆整。与单纯PLGA微球相比，包封率由60%-70%上升至80%以上。复合微球在磷酸盐缓冲液的1 h突释量由40%-50%下降至25%以下，在生理盐水中则进一步下降至5%以下。结论海藻酸-壳聚糖-PLGA复合微球提高了蛋白药物的包封率，减少了药物的突释，并可通过调节PLGA比例调节药物的释放。     

Preparation and release characteristics of polymer-coated and blended alginate microspheres

To prevent a rapid drug release from alginate microspheres in simulated intestinal media, alginate microspheres were coated or blended with polymers. Three polymers were selected and evaluated such as HPMC, Eudragit RS 30D and chitosan, as both coating materials and additive polymers for controlling the drug release. This study focused on the release characteristics of polymer-coated and blended alginate microspheres, varying the type of polymer and its concentration. The alginate microspheres were prepared by dropping the mixture of drug and sodium alginate into CaCl(2) solution using a spray-gun. Polymer-coated microspheres were prepared by adding alginate microspheres into polymer solution with mild stirring. Polymer-blended microspheres were prepared by dropping the mixture of drug, sodium alginate and additive polymer with plasticizer into CaCl(2) solution. In vitro release test was carried out to investigate the release profiles in 500 ml of phosphate buffered saline (PBS, pH 7.4). As the amount of polymer in sodium alginate or coating solution increase, the drug release generally decreased. HPMC-blended microspheres swelled but withstood the disintegration, showing an ideal linear release profiles. Chitosan-coated microspheres showed smooth and round surface and extended the release of drug. In comparison with chitosan-coated microspheres, HPMC-blended alginate microspheres can be easily made and used for controlled drug delivery systems due to convenient process and controlled drug release.     

Novel tamarind seed polysaccharide-alginate mucoadhesive microspheres for oral gliclazide delivery: in vitro-in vivo evaluation

Novel tamarind seed polysaccharide (TSP)-alginate mucoadhesive microspheres were prepared using TSP and alginate as blend in different ratios with different calcium chloride (CaCl(2)) concentration as a cross linker by ionotropic gelation. The prepared microspheres were of spherical shape having rough surfaces, and average particle sizes within the range of 752.12 ± 6.42 to 948.49 ± 20.92 μm. The drug entrapment efficiency of these microspheres were within the range between 58.12 ± 2.42 to 82.78 ± 3.43% w/w. Fourier transform infrared (FTIR) studies indicated that there were no reactions between gliclazide, and polymers (TSP, and sodium alginate) used. Different formulations of gliclazide loaded TSP-alginate microspheres showed prolonged in vitro release profiles of gliclazide over 12 hours in both stomach pH (pH 1.2), and intestinal pH (pH 7.4). It was found that the gliclazide release in gastric pH was comparatively slow and sustained than intestinal pH. These TSP-alginate microspheres also exhibited good mucoadhesivity. The in vivo studies on alloxan-induced diabetic rats (Animal Ethical Committee registration number: IFTM/837ac/0160) demonstrated the significant hypoglycemic effect of selected formulation of TSP-alginate mucoadhesive microspheres containing gliclazide on oral administration. This developed gliclazide loaded new TSP-alginate mucoadhesive microspheres may be very much useful for prolonged systemic absorption of gliclazide for proper maintaining blood glucose level and advanced patient compliance.     

Alginate–Chitosan–PLGA Composite Microspheres Enabling Single-Shot Hepatitis B Vaccination

Hepatitis B vaccination typically requires a multi-dose administration protocol over a course of 3–6 months. Aiming at developing a single-shot formulation for hepatitis B vaccine (hepatitis B surface antigen (HBsAg)), a novel vaccine delivery system, the composite microspheres of alginate–chitosan–poly(lactic-co-glycolic acid) (PLGA), was synthesized by a two-step preparation. The composite microspheres showed distinct advantages over the conventional PLGA microspheres in aspects of the high loading capacity and the elimination of lyophilizing process. The loading capacity of the composite microspheres was about seven times higher than those in the conventional PLGA microspheres, due to the protein-friendly microenvironment created by the hydrophilic alginate–chitosan cores of the composite microspheres. This vaccine delivery system was shown to be able to induce robust immune responses by single injection and display no significant difference in HBsAg-specific antibody levels compared to the double-injection method.