Release of Human Serum Albumin from Poly(lactide-co-glycolide) Microspheres

Human serum albumin (HSA) was encapsulated in a 50:50 copolymer of DL-lactide/glycolide in the form of microspheres. These microspheres were used as a model formulation to study the feasibility of controlling the release of large proteins over a 20- to 30-day period. We show that HSA can be successfully incorporated into microspheres and released intact from these microspheres into various buffer systems at 37°C. A continuous release of the protein could be achieved in physiological buffers at 37°C over a 20- to 30-day period from microspheres with high protein loadings (11.6%). These results demonstrate the potential of poly(DL-lactide-co-glycolide) microspheres for continuous delivery of large proteins.     

Characterization of Poly(glycolide-co-D,L-lactide)/Poly(D,L-lactide) Microspheres for Controlled Release of GM-CSF

Purpose. This study describes the preparation and characterization of a controlled release formulation of granulocyte-macrophage colony-stimulating factor (GM-CSF) encapsulated in poly(glycolide-co-D,L-lactide) (PLGA) and poly(D,L-lactide) (PLA) microspheres. Methods. GM-CSF was encapsulated in PLGA/PLA microspheres by a novel silicone oil based phase separation process. Several different blends of PLGA and low molecular weight PLA were used to prepare the microspheres. The microspheres and the encapsulated GM-CSF were extensively characterized both in vitroand in vivo. Results. Steady release of GM-CSF was achieved over a period of about one week without significant 'burst' of protein from the microspheres. Analysis of microsphere degradation kinetics by gel permeation chromatography (GPC) indicated that low molecular weight PLA enhanced the degradation of the PLGA and thereby affected release kinetics. GM-CSF released from the microspheres was found to be biologically active and physically intact by bioassay and chromato-graphic analysis. Analysis of serum from mice receiving huGM-CSF indicated that the GM-CSF was biologically active and that a concentration of greater than 10 ng/mL was maintained for a period lasting at least nine days. MuGM-CSF was not detected followingin vivo administration of muGM-CSF microspheres. The tissues of mice receiving muGM-CSF microspheres were characterized by infiltration of neutrophils, and macrophages which were in significant excess of those found in mice administered with placebo controls (i.e. microspheres without GM-CSF). Conclusions. This study demonstrates the influence of formulation parameters on the encapsulation of GM-CSF in PLGA/PLA microspheres and its controlled release in biologically active form. The intense local tissue reaction in mice to muGM-CSF microspheres demonstrates the importance of the mode of delivery on the pharmacologic activity of GM-CSF.     

Ligand-Specific Targeting of Microspheres to Phagocytes by Surface Modification with Poly(L-Lysine)-Grafted Poly(Ethylene Glycol) Conjugate

Purpose. The purpose of this study was to demonstrate specific receptor-mediated targeting of phagocytes by functional surface coatings of microparticles, shielding from nonspecific phagocytosis and allowing ligand-specific interactions via molecular recognition. Methods. Coatings of the comb polymer poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG) were investigated for potential to inhibit 1) nonspecific spreading of human blood-derived macrophages (MOs) and dendritic cells (DCs) on glass and 2) nonspecific phagocytosis of PLL-g-PEG-coated, carboxylated polystyrene (PS) or biodegradable poly(D,L-lactide-co-glycolide) (PLGA) microspheres. Coating was performed by adsorption of positively charged PLL-g-PEG on negatively charged microparticles or plasma-cleaned glass through electrostatic interaction. The feasibility of ligand-specific interactions was tested with a model ligand, RGD, conjugated to PEG chains of PLL-g-PEG to form PLL-g-PEG-RGD and compared with inactive ligand conjugate, PLL-g-PEG-RDG. Results. Coatings with PLL-g-PEG largely impaired the adherence and spreading of MOs and DCs on glass. The repellent character of PLL-g-PEG coatings drastically reduced phagocytosis of coated PS and PLGA microparticles to 10% in presence of serum. With both MOs and DCs, we observed ligand-specific interactions with PLL-g-PEG-RGD coatings on glass and PS and PLGA microspheres. Ligand specificity was abolished when using inactive ligand conjugate PLL-g-PEG-RDG, whereas repellency of coating was maintained. Conclusions. Coatings of PLL-g-PEG-ligand conjugates provide a novel technology for ligand specific targeting of microspheres to MOs and DCs while reducing nonspecific phagocytosis.     

Controlled Delivery Systems for Proteins Based on Poly(Lactic/Glycolic Acid) Microspheres

This paper describes an investigation of the use of poly(lactic/glycolic acid) polymers for long-term delivery of high molecular weight, water-soluble proteins. Poly(lactic/glycolic acid) (PLGA) microspheres, containing (fluorescein isothiocyanate)-labeled bovine serum albumin and (fluorescein isothiocyanate)-labeled horseradish peroxidase, were prepared by a modified solvent evaporation method using a double emulsion. The microspheres were spherical with diameters of 55–95 µm and encapsulated more than 90% of the protein. The preparation method was gentle and maintained enzyme activity and protein solubility. Stability studies showed that the encapsulation of an enzyme inside PLGA microspheres can protect them from activity loss. When not placed inside PLGA microspheres, (fluorescein isothiocyanate)-labeled horseradish peroxidase lost 80% of its activity in solution at 37°C in a few days, whereas inside the PLGA microspheres it retained more than 55% of its activity after 21 days of incubation at 37°C. In vitro release studies revealed that different release profiles (i.e., near-constant or biphasic) and release rates can be achieved by simply modifying factors in the preparation procedure such as mixing rate and volume of inner water and organic phases. Degradation studies by scanning electron microscopy and gel-permeation chromatography suggested that the mechanism responsible for protein release is mainly through matrix erosion.     

Preparation and Characterization of a Composite PLGA and Poly(Acryloyl Hydroxyethyl Starch) Microsphere System for Protein Delivery

Purpose. To prepare and characterize a novel composite microsphere system based on poly(D,L-lactide-co-glycolide) (PLGA) and poly(acryloyl hydroxyethyl starch) (acHES) hydrogel for controlled protein delivery. Methods. Model proteins, bovine serum albumin, and horseradish peroxidase were encapsulated in the acHES hydrogel, and then the protein-containing acHES hydrogel particles were fabricated in the PLGA matrix by a solvent extraction or evaporation method. The protein-loaded PLGA-acHES composite microspheres were characterized for protein loading efficiency, particle size, and in vitro protein release. Protein stability was examined by size-exclusion chromatography, sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), and monitoring the enzymatic activity. Results. Scanning electron microscopy showed discrete PLGA microspheres containing many acHES particles. The composite microspheres were spherical and smooth in size range of 39-93 m. The drug loading efficiency ranged from 51 to 101%. The composite microspheres showed more favorable in vitro release than conventional PLGA microspheres. The composite microspheres showed 20% less initial with a gradual sustained release compared to high burst (60%) followed by a very slow release with the conventional PLGA microspheres. The composite microspheres also stabilized encapsulated proteins from the loss of activity during the microsphere preparation and release. Proteins extracted from the composite microspheres showed good stability without protein degradation products and structural integrity changes in the size-exclusion chromatography and SDS-PAGE analyses. Horseradish peroxidase extracted from microspheres retained more than 81% enzymatic activity. Conclusion. The PLGA-acHES composite microsphere system could be useful for the controlled delivery of protein drugs.     

5-Fluorouracil-loaded microspheres prepared by spray-drying poly(D,L-lactide) and poly(lactide-co-glycolide) polymers: Characterization and drug release

5-Fluorouracil (5-FU), a hydrosoluble anti-neoplastic drug, was encapsulated in microspheres of poly(D,L-lactide) (PLA) and poly(lactide-co-glycolide) (PLGA) polymers using the spray-drying technique, in order to obtain small size microspheres with a significant drug entrapment efficiency. Drug-loaded microspheres included between 47?±?11 and 67?±?12?µg 5-FU?mg^?1 microspheres and the percentage of entrapment efficiency was between 52?±?12 and 74?±?13. Microspheres were of small size (average diameter: 0.9?±?0.4–1.4?±?0.8?µm microspheres without drug; 1.1?±?0.5–1.7?±?0.9?µm 5-FU-loaded microspheres) and their surface was smooth and slightly porous, some hollows or deformations were observed in microspheres prepared from polymers with larger T_g. A fractionation process of the raw polymer during the formation of microspheres was observed as an increase of the average molecular weight and also of T_g of the polymer of the microspheres. The presence of 5-FU did not modify the T_g values of the microspheres. Significant interactions between the drug and each one of the polymers did not take place and total release of the included drug was observed in all cases. The time needed for the total drug release (28–129?h) was in the order PLA?>?PLGA 75/25?>?PLGA 50/50. A burst effect (17–20%) was observed during the first hour and then a period of constant release rate (3.52?±?0.82–1.46?±?0.26?µg 5-FU?h^?1 per milligram of microspheres) up to 8 or 13?h, depending on the polymer, was obtained.     

PLGA的结构和分子量对纳曲酮微球体外释药的影响

制备了分子量、比旋度、摩尔比及分子链末端修饰不同的丙交酯-乙交酯共聚物,并测定理化参数.以其为载体制备纳曲酮微球,比较了体外释药速率.结果表明,用分子量较小、有光学活性、单体摩尔比较小、分子链末端未酯化的共聚物制备的微球体外释药速率较快.     

Formation and Characterization of Cisplatin-Loaded Poly(benzyl 1-glutamate) Microspheres for Chemoembolization

Chemoembolization using microspheres of 100- to 200-µm is a useful way to treat primary and secondary hepatic tumors. In a search for a better embolic material, we described in detail the preparation and characterization of a poly(benzyl 1-glutamate) (PBLG) microspheres containing cisplatin (CDDP). We determined the optimal experimental conditions to produce spherical free-flowing microspheres that were able to release drug content (44% [w/w] CDDP) in a sustained manner. We found that solvent viscosity played a key role in determining the resulting microsphere characteristics. Microscopic studies showed that increasing the polymer concentration (to 10% [w/v]) and the viscosity of the organic phase produced microspheres with uniform drug distribution. Increasing polymer concentration also markedly improved drug incorporation efficiency. In vitro release studies revealed that the release of CDDP was a function of drug loading; microspheres with a higher amount of entrapped CDDP had a slower release rate. This observation and the fact that CDDP/ PBLG microspheres did not show burst effect at higher loading is ascribed to the formation of uniformly distributed drug crystal networks within the polymer matrix. The favorable properties of the CDDP/PBLG system warrants its further evaluation on experimental animal models for the treatment of hepatic tumors.     

Stabilization and Controlled Release of Bovine Serum Albumin Encapsulated in Poly(D,L-lactide) and Poly(ethylene glycol) Microsphere Blends

Purpose. The acidic microclimate in poly(D, L-lactide-co-glycolide) 50/50 microspheres has been previously demonstrated by our group as the primary instability source of encapsulated bovine serum albumin (BSA). The objectives of this study were to stabilize the encapsulated model protein, BSA, and to achieve continuous protein release by using a blend of: slowly degrading poly(D, L-lactide) (PLA), to reduce the production of acidic species during BSA release; and pore-forming poly(ethylene glycol) (PEG), to increase diffusion of BSA and polymer degradation products out of the polymer. Methods. Microspheres were formulated from blends of PLA (Mw 145,000) and PEG (Mw 10,000 or 35,000) by using an anhydrous oil-in-oil emulsion and solvent extraction (O/O) method. The polymer blend composition and phase miscibility were examined by FT-IR and DSC, respectively. Microsphere surface morphology, water uptake, and BSA release kinetics were also investigated. The stability of BSA encapsulated in microspheres was examined by losses in protein solubility, SDS-PAGE, IEF, CD, and fluorescence spectroscopy. Results. PEG was successfully incorporated in PLA microspheres and shown to possess partial miscibility with PLA. A protein loading level of 5% (w/w) was attained in PLA/PEG microspheres with a mean diameter of approximately 100 m. When PEG content was less than 20% in the blend, incomplete release of BSA was observed with the formation of insoluble, and primarily non-covalent aggregates. When 20%-30% PEG was incorporated in the blend formulation, in vitro continuous protein release over 29 days was exhibited. Unreleased BSA in these formulations was water-soluble and structurally intact. Conclusions. Stabilization and controlled relaease of BSA from PLA/PEG microspheres was achieved due to low acid and high water content in the blend formulation.     

Dose and Load Studies for Subcutaneous and Oral Delivery of Poly(lactide-co-glycolide) Microspheres Containing Ovalbumin

Poly(lactide-co-glycolide) microspheres containing different loads of OVA (0.05, 0.1, 0.5 and 1.0% w/w) were manufactured by a w/o/w emulsion/solvent evaporation method. Low load efficiencies of less than 20% were observed. Normal size distributions with mean volume diameters ranging from 3.7 to 4.7 µm were obtained for different batches. The in vitro release of OVA from different loaded microspheres showed an expected burst release with all batches. The in vivo dose study (1, 10, 25, 50 µg of OVA) was performed by subcutaneous and oral inoculation in mice by single (0 week) or double (0 and 3 weeks) administration of PLGA 50/50 microspheres containing 0.1% OVA. Subcutaneous administration showed an immune response (serum Ig levels by ELISA) statistically (Fishers paired t-test; P < 0.05) above OVA saline negative controls at 3, 6 and 12 weeks after administration. Oral administration of microspheres produced statistically higher systemic immune responses at the higher doses. Single and double inoculation orally and subcutaneously produced similar serum antibody levels. The in vivo load study was performed by subcutaneous and oral administration to mice of 25 µg OVA contained in various loaded (0.05, 0.1, 0.5 and 1.0% w/w) microspheres. Serum immune responses at 3, 6, and 12 weeks after inoculation were statistically above OVA saline controls and were inversely proportional to the OVA load using either route. This observation suggested a relationship between the number of microspheres delivered and the in vivo serum response. Single subcutaneous administration of 0.05 or 0.1% OVA loaded PLGA 50/50 microspheres induced larger immune responses compared with complete Freunds adjuvant.     

Physical Aging of Progesterone-Loaded Poly(D,L,-lactide-co-glycolide) Microspheres

Purpose. To study the interactions between a polymeric matrix and a drug during storage at a temperature lower than the glass transition temperature of the polymers. Methods. Poly(lactide-co-glycolide) microspheres loaded with different progesterone ratios were stored at 4, 20 and 40°C. DSC-scans were recorded at regular intervals, depending on the storage temperature. Results. The physical aging of the polymeric matrix, as monitored by the amplitude of the endotherm associated with the glass transition, is slowed down by crystalline progesterone. The development of the progesterone polymorphic depends on the interface/volume ratio of the crystals. Conclusions. For polymeric drug delivery systems, the determination of all studies parameters must take into account an effect of dispersed drugs which are more sensitive as the storage temperature is lower than the glass transition temperature of the matrix.     

In Vitro Characterization and in Vivo Testosterone Suppression of 6-Month Release Poly(D,L-Lactide) Leuprolide Microspheres

Pharmaceutical Research -     

Study of the Influence of Several Stabilizing Agents on the Entrapment and In Vitro Release of pBC 264 from Poly(Lactide-Co-Glycolide) Microspheres Prepared by a W/O/W Solvent Evaporation Method

Pharmaceutical Research -     

尼索地平微球的制备

采用溶剂挥发法制备了尼索地平微球 ,考察了制备工艺中影响微球质量的 5个主要因素 ,筛选出较理想的处方和工艺。所得微球形态圆整 ,表面光滑 ,粒径 (18.2± 3.8) μm,载药量 2 1.2 % ,包封率 85 .4 %。     

Determinants of Release Rate of Tetanus Vaccine from Polyester Microspheres

Controlled-release formulations based on poly(lactic) (PLA) and poly(lactic/glycolic) acid (PLGA) microspheres containing tetanus vaccine were designed. The polymers forming the microspheres were L-PLA of different molecular weights and DL-PLGA, 50:50. These microspheres were prepared by two solvent elimination procedures, both using a double emulsion, and were characterized for size, morphology, and toxoid release kinetics. The influence of formulation variables such as polymer type, vaccine composition, and vaccine/polymer ratio was also investigated. Both techniques yielded microspheres with similar size, morphology, and release properties. Microsphere size was dependent on the type of polymer and the presence of the surfactant L--phosphatidylcholine, which led to a reduction in microsphere size. On the other hand, the release kinetics of encapsulated protein were affected by the polymer properties (ratio lactic/glycolic acid and molecular weight) as well as by the vaccine composition, vaccine loading, and microsphere size. Moreover, for some formulations, a decrease in microsphere size occurred simultaneously, with an increase in porosity leading to an augmentation of release rate. The changes in the PLA molecular weight during in vitro release studies indicated that release profiles of tetanus toxoid from these microspheres were only marginally influenced by polymer degradation. A significant fraction of protein (between 15 and 35%) was initially released by diffusion through water-filled channels. In contrast, the decrease in the PLGA molecular weight over the first 10 days of incubation suggested that erosion of the polymer matrix substantially affects protein release from these microspheres. Among all formulations developed, two differing in microsphere size, polymer hydrophobicity, and release profile were selected for in vivo administration to mice. Administration of both formulations resulted in tetanus neutralizing antibody levels that were higher than those obtained after administration of the fluid toxoid.     

Preparation,Characterization, and In Vitro Evaluation of 1- and 4-Month Controlled Release Orntide PLA and PLGA Microspheres

Purpose. To prepare, characterize and evaluate in vitro sustained delivery formulations for a novel LHRH antagonist, Orntide acetate, using biodegradable microspheres (ms). Methods. Poly(d,l-lactide) (PLA) and poly(d,l-lactide-co-glycolide) (PLGA) were characterized for molecular weight (M_w, M_n) using gel permeation chromatography (GPC) and content of free end carboxyl groups (acid number, AN) by a titration method. 1- and 4-month Orntide ms were prepared by a dispersion / solvent extraction / evaporation process and characterized for drug content (HPLC), bulk density (tapping method), particle size (laser diffraction method), surface morphology (scanning electron microscopy, SEM), and structural integrity of encapsulated peptide by Fourier Transform Matrix Assisted Laser Desorption mass spectrometry (FT-MALDI). Peptide binding to PLA and PLGA and non-specific adsorption to blank ms was studied in 0.1 M phosphate buffer pH 7.4 (PB) and 0.1 M acetate buffer pH 4.0 (AB). In vitro release of peptide was assessed in PB and AB. Results. M_w for the PLGA copolymers varied from 10,777 to 31,281 Da and was 9,489 Da for PLA. AN was between 4.60 and 15.1 for the hydrophilic resomers and 0.72 for the hydrophobic 50:50 PLGA copolymer. Spherical ms (3.9 μ to 14 μ in diameter) with mostly non-porous surface and varying degree of internal porosity were prepared. FT-MALDI mass spectra of the extracted peptide showed that the encapsulation process did not alter its chemical structure. Peptide binding to PLGA and PLA and non-specific adsorption to blank PLGA ms were dependent upon pH and were markedly higher in PB than in AB. The initial in vitro release in PB varied from 0.5 to 26%/24 h but due to substantial binding of the peptide to the polymeric matrix the long-term release in PB could not be determined. Application of a dialysis method allowed for a more accurate determination of in vitro release and a good total drug recovery. Conclusions. Orntide acetate was successfully incorporated into PLA and PLGA ms and the 1- and 4-month in vitro release profiles were achieved by polymer selection and optimization of the manufacturing parameters.     

Poly(l-lactide-co-glycolide) nanospheres conjugated with a nuclear localization signal for delivery of plasmid DNA

Polymeric nanospheres fabricated from biodegradable poly(lactide-co-glycolide) (PLGA) have been extensively investigated for applications in gene delivery. In this study, we show that the covalent conjugation of a nuclear localization signal (NLS, SV40 peptide) on PLGA nanospheres enhances the gene transfection efficiency. NLS conjugated PLGA copolymer was prepared by using a coupling reaction between maleimide-terminated PLGA copolymer and NLS in the presence of Imject maleimide conjugation buffer. PLGA nanospheres encapsulating plasmid (pDNA) were prepared by using a double emulsion-solvent evaporation method. The kinetics of in vitro release of pDNA from PLGA nanospheres was determined with UV in phosphate buffered saline (PBS). Gene transfection efficiency in human dermal fibroblasts was tested in vitro using nanospheres encapsulating the luciferase gene. The conjugation of the NLS peptide to the PLGA nanospheres could improve the nuclear localization and/or cellular uptake of PLGA nanosphere/pDNA constructs and thereby improve the transfection efficiency of a PLGA nanosphere gene delivery system. The pDNA was released from PLGA nanospheres over nine days. NLS conjugation enhanced the gene transfection efficiency in vitro by 1.2 ～ 3.2-fold over 13 days. PLGA/pDNA nanospheres appeared to be superior to PEI/pDNA complexes for the long-term expression of pDNA. Furthermore, the level of the sustained gene expression of the PLGA nanospheres was enhanced by the conjugation of NLS to the PLGA nanospheres. This study showed that the NLS conjugation enhanced the gene transfection efficiency of the PLGA nanosphere gene delivery system in vitro and that the enhanced gene expression was sustained for at least 13 days.     

Utilization of an Amorphous Form of a Water-Soluble GPIIb/IIIa Antagonist for Controlled Release from Biodegradable Microspheres

Purpose. We prepared injectable microspheres for controlled release of TAK-029, a water-soluble GPIIb/IIIa antagonist and discussed the characteristics of controlled release from microspheres. Methods. Copoly(dl-lactic/glycolic)acid (PLGA) microspheres were used for controlled release of TAK-029 [4-(4-amidinobenzoylglycyl)-3-methoxycarbonyl-2-oxopiperazine-l-acetic acid]. They were prepared with a solid-in-oil-in-water (S/O/W) emulsion solvent evaporation technique using either a crystalline form or an amorphous form of the drug. Results. An amorphous form of TAK-029 gave more homogeneous S/O dispersion and higher viscosity than its crystalline form when added to dichloromethane solution of PLGA, resulting in a high drug entrapment into microspheres and a well-controlled release of the drug. Additions of sodium chloride into an external aqueous phase and L-arginine into an oil phase also increased entrapment of the drug, and reduced initial burst of the drug from the microspheres. The micro-spheres demonstrated a desirable plasma level profile in therapeutic range (20–100 ng/ml) for 3 weeks in rats after single subcutaneous injection. Conclusions. A well-controlled release of TAK-029, a water-soluble neutral drug, with small initial burst was achieved by utilizing its amorphous form as a result of possible interaction with PLGA and L-arginine.     

Sustained Bronchodilation with Isoproterenol Poly(Glycolide-co-Lactide) Microspheres

An animal study was carried out to evaluate the in vivo bronchodilator action of isoproterenol (Iso) from poly(glycolide-co-lactide) (PGL) microspheres. Microspheres with a mean diameter of 4.5 µm and a drug load of 7% were administered intratracheally to Long-Evans rats. The microspheres released about 70% of the incorporated drug in the instillation medium before administration, which provided immediate action, and the remaining 30% was available for sustained release. A total of 120 animals was anesthetized, paralyzed, artificially ventilated, and divided into 15 groups (n = 8): 3 groups each for saline, blank microspheres, free Iso, blank microspheres with free Iso, and microencapsulated Iso. All instillations were made in a volume of 1 ml/kg and the dose of all Iso preparations was 0.1 mg/kg. At 3, 6, or 12 hr after the intratracheal instillation, a serotonin challenge (40 µg/rat) was administered intravenously to constrict the airways. Airway function tests were performed at each time interval on one group of animals by a maximal expiratory flow-volume maneuver. The heart rate in animals receiving Iso formulations was similar to that in the saline control group, indicating minimal systemic effect of the dose administered. The systemic serum levels were below 2 ng/ml in all the groups. Animals receiving encapsulated Iso resisted the serotonin challenge for at least 12 hr after intratracheal instillation, indicating that the drug was still present over this period of time. On the other hand, the serotonin-induced airway constriction observed in the animals receiving blank microspheres, free Iso, or free Iso with blank microspheres was similar to that in saline controls at all time points. The results clearly show that only a small fraction of the free dose is required in sustained-release form for a prolonged pharmacological effect, resulting in a 50- to 100-fold reduction in the total dose administered.     

环丙沙星聚乳酸微球的制备、性状和体外释药性能的研究

目的采用乳化-溶剂蒸发法制备环丙沙星聚乳酸微球,并对其性状进行考察.方法通过正交设计试验筛选其最佳制备工艺, 用电子显微镜观察微球表面形态, 差示扫描热分析确证含药微球的形成, 并对微球的平均粒径、载药量、包封率、体外释药性能进行了研究.结果环丙沙星聚乳酸微球的形态圆整, 且药物确已被包裹在微球中, 微球的平均粒径为280.80±0.15 μm, 粒径在250-390 μm之间的占总数的90%以上. 包封率为68.5%±0.58, 载药量为34.1%±0.51,环丙沙星微球的体外释药情况为53.2小时的累积释药量为84.0%,T1/2为31.9 h, Higuchi方程为Q=-0.004 3 0.003 9 t1/2,r=0.994 1.结论本研究获得了较满意的制备环丙沙星聚乳酸微球的工艺, 且微球的体外释药性能具有明显的缓释效果.