Analytical and Clinical Evaluation of the Epistem Genedrive Assay for Detection of Mycobacterium tuberculosis

The Epistem Genedrive assay rapidly detects the Mycobacterium tuberculosis complex from sputum and is currently available for clinical use. However, the analytical and clinical performance of this test has not been fully evaluated. The analytical limit of detection (LOD) of the Genedrive PCR amplification was tested with genomic DNA; the performance of the complete (sample processing plus amplification) system was tested by spiking M. tuberculosis mc²6030 cells into distilled water and M. tuberculosis-negative sputum. Specificity was tested using common respiratory pathogens and nontuberculosis mycobacteria. A clinical evaluation enrolled adults with suspected pulmonary tuberculosis, obtained three sputum samples from each participant, and compared the accuracy of the Genedrive to that of the Xpert MTB/RIF assay using M. tuberculosis cultures as the reference standard. The Genedrive assay had an LOD of 1 pg/μl (100 genomic DNA copies/reaction). The LODs of the system were 2.5 × 10⁴ CFU/ml and 2.5 × 10⁵ CFU/ml for cells spiked into water and sputum, respectively. False-positive rpoB probe signals were observed in 3/32 (9.4%) of the negative controls and also in few samples containing Mycobacterium abscessus, Mycobacterium gordonae, or Mycobacterium thermoresistibile. In the clinical study, among 336 analyzed participants, the overall sensitivities for the tuberculosis case detection of Genedrive, Xpert, and smear microscopy were 45.4% (95% confidence interval [CI], 35.2% to 55.8%), 91.8% (95% CI, 84.4% to 96.4%), and 77.3% (95% CI, 67.7% to 85.2%), respectively. The sensitivities of Genedrive and Xpert for the detection of smear-microscopy-negative tuberculosis were 0% (95% CI, 0% to 15.4%) and 68.2% (95% CI, 45.1% to 86.1%), respectively. The Genedrive assay did not meet performance standards recommended by the World Health Organization for a smear microscopy replacement tuberculosis test. Epistem is working on modifications to improve the assay.     

Detection of Mycobacterium tuberculosis complex in pulmonary and extrapulmonary samples with the FluoroType MTBDR assay

ObjectivesRifampicin (RIF) and isoniazid (INH) are the two most effective first-line antibiotic drugs for the treatment of tuberculosis (TB). The new FluoroType MTBDR (FT-MTBDR) real-time PCR is intended to detect INH and RIF resistance mutations as a second step following a primary Mycobacterium tuberculosis complex (MTBC) PCR. Here we evaluate the feasibility of the FT-MTBDR assay to detect simultaneously MTBC-specific DNA as well as to detect potential INH and RIF resistance through analysing inhA promotor, katG and rpoB sequences in one PCR reaction.MethodsWe analysed 3885 consecutive primary samples with FT-MTBDR and compared the results with microscopy and culture: 978 were from sputum, 2007 from other respiratory tract locations plus gastric lavages, and 875 from extrapulmonary locations, respectively.ResultsOverall, 176 samples were MTBC culture positive and 139 FT-MTBDR positive, providing a FT-MTBDR sensitivity of 0.714 (95% confidence interval 0.640–0.779) and specificity of 0.996 (0.994–0.998), respectively. For the 978 sputum, 96 were MTBC culture positive and 89 FT-MTBDR positive, sensitivity 0.854 (0.764–0.915) and specificity 0.992 (0.983–0.997). Of the 139 MTBC positive, 99 (71%) had interpretable genotypic resistance results for at least one drug, 92 (66%) for both drugs.DiscussionThe ability of FT-MTBDR to detect MTBC is adequate with the significant added feature of simultaneous genotypic resistance detection of both INH and RIF in a single PCR reaction.     

Improving the Sensitivity of the Xpert MTB/RIF Assay on Sputum Pellets by Decreasing the Amount of Added Sample Reagent: a Laboratory and Clinical Evaluation

The Xpert MTB/RIF (Xpert) assay permits rapid near-patient detection of Mycobacterium tuberculosis in sputum; however, the test sensitivity remains suboptimal in paucibacillary specimens that are negative for acid-fast bacilli using smear microscopy. Xpert testing includes dilution with sample reagent, and when processed sputum pellets are tested, the recommended sample reagent/pellet ratio is 3:1. We evaluated whether a decreased sample reagent/pellet ratio of 2:1 increased Xpert sensitivity compared to the recommended 3:1. The limit of detection was determined by inoculating serial dilutions of M. tuberculosis into sputum samples, preparing sputum pellets, and testing each pellet by Xpert at both sample reagent ratios. Processed sputum pellets obtained from M. tuberculosis culture-positive clinical specimens were also tested by Xpert at both ratios. Among spiked sputum pellets, the limit of detection was 1,478 CFU/ml (95% confidence interval [CI], 1,211 to 1,943) at a 3:1 ratio and decreased to 832 CFU/ml (95% CI, 671 to 1,134) at 2:1. The proportion of specimens in which M. tuberculosis was detected was greater at 2:1 than at 3:1 for almost all numbers of CFU/ml; this difference was most prominent at lower numbers of CFU/ml. Among 134 concentrated sputum pellets from the clinical study, the sensitivity of Xpert at 2:1 was greater than at 3:1 overall (80% versus 72%; P = 0.03) and for smear-negative specimens (67% versus 58%; P = 0.12). For Xpert testing of sputum pellets, using a lower sample reagent/pellet ratio increased M. tuberculosis detection, especially for paucibacillary specimens. Our study supports use of a 2:1 sample reagent/pellet dilution for Xpert testing of sputum pellets.     

Multicenter Evaluation of Anyplex Plus MTB/NTM MDR-TB Assay for Rapid Detection of Mycobacterium tuberculosis Complex and Multidrug-Resistant Isolates in Pulmonary and Extrapulmonary Specimens

The rapid diagnosis of tuberculosis (TB) and the detection of drug-resistant Mycobacterium tuberculosis strains are critical for successful public health interventions. Therefore, TB diagnosis requires the availability of diagnostic tools that allow the rapid detection of M. tuberculosis and drug resistance in clinical samples. Here, we performed a multicenter study to evaluate the performance of the Seegene Anyplex MTB/NTM MDR-TB assay, a new molecular method based on a multiplex real-time PCR system, for detection of Mycobacterium tuberculosis complex (MTBC), nontuberculous mycobacteria (NTM), and genetic determinants of drug resistance. In total, the results for 755 samples (534 pulmonary and 221 extrapulmonary samples) were compared with the results of smears and cultures. For pulmonary specimens, the sensitivities of the Anyplex assay and acid-fast bacillus smear testing were 86.4% and 75.0%, respectively, and the specificities were 99% and 99.4%. For extrapulmonary specimens, the sensitivities of the Anyplex assay and acid-fast bacillus smear testing were 83.3% and 50.0%, respectively, and the specificities of both were 100%. The negative and positive predictive values of the Anyplex assay for pulmonary specimens were 97% and 100%, respectively, and those for extrapulmonary specimens were 84.6% and 100%. The sensitivities of the Anyplex assay for detecting isoniazid resistance in MTBC strains from pulmonary and extrapulmonary specimens were 83.3% and 50%, respectively, while the specificities were 100% for both specimen types. These results demonstrate that the Anyplex MTB/NTM MDR-TB assay is an efficient and rapid method for the diagnosis of pulmonary and extrapulmonary TB and the detection of isoniazid resistance.     

Exploring Alternative Biomaterials for Diagnosis of Pulmonary Tuberculosis in HIV-Negative Patients by Use of the GeneXpert MTB/RIF Assay

The utility of the GeneXpert MTB/RIF (Xpert) assay for detection of Mycobacterium tuberculosis in sputum samples has been extensively studied. However, the performance of the Xpert assay as applied to other readily accessible body fluids such as exhaled breath condensate (EBC), saliva, urine, and blood has not been established. We used the Xpert assay to test EBC, saliva, urine, and blood samples from HIV-negative, smear- and culture-positive pulmonary tuberculosis (TB) patients for the presence of M. tuberculosis. To compare the ability of the assay to perform bacterial load measurements on sputum samples with versus without sample processing, the assay was also performed on paired direct and processed sputum samples from each patient. The Xpert assay detected M. tuberculosis in none of the 26 EBC samples (sensitivity, 0.0%; 95% confidence interval [95% CI], 0.0%, 12.9%), 10 of the 26 saliva samples (sensitivity, 38.5%; 95% CI, 22.4%, 57.5%), 1 of 26 urine samples (sensitivity, 3.8%; 95% CI, 0.7%, 18.9%), and 2 of 24 blood samples (sensitivity, 8.3%; 95% CI, 2.3%, 25.8%). For bacterial load measurements in the different types of sputum samples, the cycle thresholds of the two M. tuberculosis-positive sputum types were well correlated (Spearman correlation of 0.834). This study demonstrates that the Xpert assay should not be routinely used to detect M. tuberculosis in EBC, saliva, urine, or blood samples from HIV-negative patients suspected of having pulmonary tuberculosis. As a test of bacterial load, the assay produced similar results when used to test direct versus processed sputum samples. Sputum remains the optimal sample type for diagnosing pulmonary tuberculosis in HIV-negative patients with the Xpert assay.     

Rapid diagnosis of tuberculosis directly from clinical specimens using a gene chip

The aim of this study was to explore a gene chip capable of detecting the presence of Mycobacterium tuberculosis isolates directly in clinical sputum specimens and to compare it with current molecular detection techniques. At first, we selected 13 M. tuberculosis-specific target genes to construct a gene chip for rapid diagnosis. Using the membrane array method, we diagnosed M. tuberculosis by gene chip directly from 246 sputum specimens from patients suspected of having tuberculosis. Among 80 M. tuberculosis complex (MTBC) culture-positive sputum specimens, the MTBC detection rate was 62.5% (50/80) by PCR–restriction fragment length polymorphism (RFLP), 70% (56/80) by acid-fast staining, and 85% (68/80) by the membrane array method. Furthermore, subspecies showed different gene expression patterns in the membrane array. In conclusion, MTBC could be detected directly in sputum by the membrane array method. The rapidity of detection and the capability of differentiating subspecies could make this method useful in the control and prevention of tuberculosis.     

Rapid detection of rpoB mutations in rifampin resistant M. tuberculosis from sputum samples by denaturing gradient gel electrophoresis

Objective: To establish a rapid detection method for identifying rpoB mutations associated with rifampin (RIF) resistance in sputum specimens.Methods: We detected rpoB mutations directly in 90 sputum specimens collected from suspected tuberculosis patients using PCR-based denaturing gradient gel electrophoresis (DGGE) and compared these results with those obtained by rpoB sequencing and conventional drug susceptibility testing.Results: The positive detection rate of Mycobacterium tuberculosis (M. tuberculosis) was 52.2% by Acid-Fast Bacilli staining and 72.2% by conventional mycobacterial culture. In contrast, the positive rate was significantly higher (93.3%) by PCR-based detection of the rpoB gene in the same specimens. Furthermore, 75% of the tested specimens presented abnormal patterns compared with the wild-type pattern (standard H37Rv strain) analysed by DGGE. A total of 12 different patterns, representing 12 different rpoB mutations, were observed in the 63 abnormal patterns. The match rate of rpoB mutations detected by DGGE reached 96.9% when compared to DNA sequencing.Conclusion: Our findings indicate that PCR-based DGGE is a rapid and reliable bio-technique for direct detection of rpoB mutations associated with RIF resistance in the sputum of suspected tuberculosis patients.     

A Novel Reporter Phage To Detect Tuberculosis and Rifampin Resistance in a High-HIV-Burden Population

Improved diagnostics and drug susceptibility testing for Mycobacterium tuberculosis are urgently needed. We developed a more powerful mycobacteriophage (Φ²GFP10) with a fluorescent reporter. Fluorescence-activated cell sorting (FACS) allows for rapid enumeration of metabolically active bacilli after phage infection. We compared the reporter phage assay to GeneXpert MTB/RIF for detection of M. tuberculosis and rifampin (RIF) resistance in sputum. Patients suspected to have tuberculosis were prospectively enrolled in Durban, South Africa. Sputum was incubated with Φ²GFP10, in the presence and absence of RIF, and bacilli were enumerated using FACS. Sensitivity and specificity were compared to those of GeneXpert MTB/RIF with an M. tuberculosis culture as the reference standard. A total of 158 patients were prospectively enrolled. Overall sensitivity for M. tuberculosis was 95.90% (95% confidence interval (CI), 90.69% to 98.64%), and specificity was 83.33% (95% CI, 67.18% to 93.59%). In acid-fast bacillus (AFB)-negative sputum, sensitivity was 88.89% (95% CI, 73.92% to 96.82%), and specificity was 83.33% (95% CI, 67.18% to 93.59%). Sensitivity for RIF-resistant M. tuberculosis in AFB-negative sputum was 90.00% (95% CI, 55.46% to 98.34%), and specificity was 91.94% (95% CI, 82.16% to 97.30%). Compared to GeneXpert, the reporter phage was more sensitive in AFB smear-negative sputum, but specificity was lower. The Φ²GFP10 reporter phage showed high sensitivity for detection of M. tuberculosis and RIF resistance, including in AFB-negative sputum, and has the potential to improve phenotypic testing for complex drug resistance, paucibacillary sputum, response to treatment, and detection of mixed infection in clinical specimens.     

Evaluation of the Analytical Performance of the Xpert MTB/RIF Assay

We performed the first studies of analytic sensitivity, analytic specificity, and dynamic range for the new Xpert MTB/RIF assay, a nucleic acid amplification-based diagnostic system that detects Mycobacterium tuberculosis and rifampin (RIF) resistance in under 2 h. The sensitivity of the assay was tested with 79 phylogenetically and geographically diverse M. tuberculosis isolates, including 42 drug-susceptible isolates and 37 RIF-resistant isolates containing 13 different rpoB mutations or mutation combinations. The specificity of the assay was tested with 89 nontuberculosis bacteria, fungi, and viruses. The Xpert MTB/RIF assay correctly identified all 79 M. tuberculosis isolates and correctly excluded all 89 nontuberculosis isolates. RIF resistance was correctly identified in all 37 resistant isolates and in none of the 42 susceptible isolates. Dynamic range was assessed by adding 10² to 10⁷ CFU of M. tuberculosis into M. tuberculosis-negative sputum samples. The assay showed a log-linear relationship between cycle threshold and input CFU over the entire concentration range. Resistance detection in the presence of different mixtures of RIF-resistant and RIF-susceptible DNA was assessed. Resistance detection was dependent on the particular mutation and required between 65% and 100% mutant DNA to be present in the sample for 95% certainty of resistance detection. Finally, we studied whether assay specificity could be affected by cross-contaminating amplicons generated by the GenoType MTBDRplus assay. M. tuberculosis was not detected until at least 10⁸ copies of an MTBDRplus amplicon were spiked into 1 ml of sputum, suggesting that false-positive results would be unlikely to occur.Conventional diagnostic methods for Mycobacterium tuberculosis are slow and/or lack sensitivity. A number of new diagnostic approaches have brought incremental improvements to detection and drug susceptibility testing; however, the technical complexity of these assays and their dependence on dedicated laboratory infrastructure have limited their adoption, especially in low-resource, high-burden settings (1, 11, 12, 21). The recently introduced Xpert MTB/RIF (manufactured and marketed by Cepheid, Sunnyvale, CA) assay simultaneously detects the presence of M. tuberculosis and its susceptibility to the important first-line drug rifampin (RIF) (7). A sample processing system and an automated heminested real-time PCR assay are integrated into a single disposable cartridge. The assay can be performed directly from a clinical sputum sample or from a decontaminated sputum pellet and can generally be completed in less than 2 h (7).The Xpert MTB/RIF assay detects M. tuberculosis and RIF resistance by PCR amplification of the rifampin resistance-determining region (RRDR) of the M. tuberculosis rpoB gene and subsequent probing of this region for mutations that are associated with RIF resistance. Approximately 95% of RIF-resistant tuberculosis cases contain mutations in this 81-bp region (16). Our previous work has established that the Xpert MTB/RIF assay has a limit of detection (LOD), defined as the minimum number of bacilli that can be detected with 95% confidence) of 131 CFU per ml of clinical sputum (7). The assay was also able to identify RIF resistance in samples containing 23 common clinically occurring rpoB mutations. None of the 20 nontuberculosis mycobacteria (NTM) species tested, including the NTM species commonly described as causing human disease were falsely identified as M. tuberculosis (7), suggesting high specificity. Several small studies using clinical samples demonstrated 98% to 100% sensitivity overall, 72% sensitivity in smear-negative patients, and a specificity of 100% (7).In the present study, we expand upon our previous work and report on several critical analytical assay performance characteristics, including dynamic range, sensitivity, specificity, RIF resistance detection in heterogeneous samples, and resiliency against cross-contamination by other nucleic acid amplification techniques (NAATs).     

Detection of Mycobacterium tuberculosis resistance mutations to rifampin and isoniazid by real-time PCR

Objective: The objective of our study was to evaluate the use of a real-time polymerase chain reaction (PCR)-based technique for the prediction of phenotypic resistance of Mycobacterium tuberculosis. Materials and Methods: We tested 67 M tuberculosis strains (26 drug resistant and 41 drug susceptible) using a method recommended for the LightCycler platform. The susceptibility testing was performed by the absolute concentration method. For rifampin resistance, two regions of the rpoB gene were targeted, while for identification of isoniazid resistance, we searched for mutations in katG and inhA genes. Results: The sensitivity and specificity of this method for rapid detection of mutations for isoniazid resistance were 96% (95% CI: 88% to 100%) and 95% (95% CI: 89% to 100%), respectively. For detection of rifampin resistance, the sensitivity and specificity were 92% (95% CI: 81% to 100%) and 74% (95% CI: 61% to 87%), respectively. The main isoniazid resistance mechanism identified in our isolates is related to changes in the katG gene that encodes catalase. We found that for rifampin resistance the concordance between the predicted and observed phenotype was less than satisfactory. Conclusions: Using this method, the best accuracy for genotyping compared with phenotypic resistance testing was obtained for detecting isoniazid resistance mutations. Although real-time PCR assay may be a valuable diagnostic tool, it is not yet completely satisfactory for detection of drug resistance mutations in M tuberculosis.     

Comparison of the GenoType? MTBC Molecular Genetic Assay with culture methods in the diagnosis of tuberculosis

Introduction

Clinical samples from 433 patients pre-diagnosed with tuberculosis in Konya, Turkey, were investigated prospectively to compare the GenoType^® MTBC test (GenoType^® MTBC) with conventional “gold standard” culture methods.

Material and methods

Lowenstein Jensen (LJ) and Mycobacteria Growth Indicator Tube (MGIT)-960 culture methods and GenoType^® MTBC were performed together.

Results

Mycobacterium tuberculosis (M. tuberculosis) detection rates were 16.2% by culture methods, 15.4% by GenoType^® MTBC, and 6% by acid-fast bacilli microscopy. The LJ or MGIT-960 with GenoType^® MTBC detected M. tuberculosis in 12 samples each that were negative according to the other culture method alone. Among 70 M. tuberculosis-positive samples, detection rates were 37% (26/70) by microscopy and 82.8% (58/70) by LJ and MGIT-960, but 95.7% (67/70) by GenoType^® MTBC.

Conclusions

GenoType^® MTBC may be used as a beneficial adjunct test to culture methods for the detection of M. tuberculosis.     

An automated smear microscopy system to diagnose tuberculosis in a high-burden setting

ObjectivesTB-EASM (Howsome, Shanghai, China), an automated system combining smear preparation, staining and microscopy in a single platform, was evaluated for tuberculosis (TB) diagnosis in a high disease-burden setting.MethodsSputum samples from individuals with pulmonary TB were processed in parallel using conventional manual smear microscopy (MS), TB-EASM, liquid culture and GeneXpert. Method sensitivity and specificity were compared with Mycobacterium tuberculosis detection by mycobacteria growth indicator tube (MGIT) and/or GeneXpert MTB/RIF.ResultsOf 524 samples, 496 met evaluation criteria for study inclusion. The proportion of M. tuberculosis detected by TB-EASM was 28.2% (150/496), significantly higher than for MS (111/496, 21.2%, p 0.01) and comparable to the rate for MGIT (163/496, 32.9%, p > 0.05). For 190 M. tuberculosis-positive cases identified using MGIT and/or GeneXpert MTB/RIF, the reference standard detection methods, TB-EASM detected 140 positive cases, for an overall sensitivity rate of 73.7% (140/190, 95% CI 67.4–79.9), which was significantly higher than for MS (105/190, 55.3%, 95% CI 48.2–62.3, p < 0.01). Specificities were 96.7% (296/306, 95% CI 94.7–98.7) for TB-EASM and 98.0% (300/306, 95% CI 96.5–99.6) for MS.ConclusionTB-EASM outperformed conventional MS for M. tuberculosis detection in sputum specimens.     

Mixed Mycobacterium tuberculosis Complex Infections and False-Negative Results for Rifampin Resistance by GeneXpert MTB/RIF Are Associated with Poor Clinical Outcomes

The Xpert MTB/RIF (Xpert) assay is becoming a principal screening tool for diagnosing rifampin-resistant Mycobacterium tuberculosis complex (MTBC) infection. However, little is known about the performance of the Xpert assay in infections with both drug-sensitive and drug-resistant strains (mixed MTBC infections). We assessed the performance of the Xpert assay for detecting rifampin resistance using phenotypic drug sensitivity testing (DST) as the reference standard in 370 patients with microbiologically proven pulmonary tuberculosis. Mixed MTBC infections were identified genetically through 24-locus mycobacterial interspersed repetitive-unit–variable-number tandem-repeat (MIRU-VNTR) analysis. Logistic regression was used to identify the factors associated with poor (defined as treatment failure, default, and death from any cause) or good (defined as cure or successful treatment completion) clinical outcomes. The analytic sensitivity of the Xpert assay for detecting rifampin resistance was assessed in vitro by testing cultures containing different ratios of drug-sensitive and drug-resistant organisms. Rifampin resistance was detected by the Xpert assay in 52 (14.1%) and by phenotypic DST in 55 (14.9%) patients. Mixed MTBC infections were identified in 37 (10.0%) patients. The Xpert assay was 92.7% (95% confidence interval [CI], 82.4% to 97.9%) sensitive for detecting rifampin resistance and 99.7% (95% CI, 98.3% to 99.9%) specific. When restricted to patients with mixed MTBC infections, Xpert sensitivity was 80.0% (95% CI, 56.3 to 94.3%). False-negative Xpert results (adjusted odds ratio [aOR], 6.6; 95% CI,1.2 to 48.2) and mixed MTBC infections (aOR, 6.5; 95% CI, 2.1 to 20.5) were strongly associated with poor clinical outcome. The Xpert assay failed to detect rifampin resistance in vitro when <90% of the organisms in the sample were rifampin resistant. Our study indicates that the Xpert assay has an increased false-negative rate for detecting rifampin resistance with mixed MTBC infections. In hyperendemic settings where mixed infections are common, the Xpert results might need further confirmation.     

Rapid Detection of the Mycobacterium tuberculosis Complex by Use of Quenching Probe PCR (geneCube)

Early detection of tuberculosis (TB) is essential for infection control. The geneCube (Toyobo) is a novel fully automated gene analyzer that can amplify target DNAs within 60 min. In this study, we evaluated the ability of the geneCube to directly detect Mycobacterium tuberculosis complex (MTBC) and Mycobacterium avium complex (MAC) in clinical specimens. The results were then compared with those obtained using conventional culture, microscopy, and the Cobas Amplicor assay (Roche). We examined a total of 516 frozen samples from 69 patients who showed culture-positive infection (73 samples; 39 MTBC, 32 MAC, and 2 mixed infections) and from 354 patients who were culture negative (443 samples). Assays using the geneCube had a sensitivity of 85.4% and a specificity of 99.8% for detection of MTBC and a sensitivity of 85.3% and a specificity of 99.8% for detection of MAC. These results are similar to those obtained using the Amplicor system but were obtained much more rapidly (1 h with the geneCube versus 5.5 h with the Amplicor system). The geneCube thus enables a significant shortening of the assay time with no loss of sensitivity or specificity.     

Performance of lipid fingerprint by routine matrix-assisted laser desorption/ionization time of flight for the diagnosis of Mycobacterium tuberculosis complex species

ObjectivesRapid detection of bacterial pathogens at species and sub-species levels is crucial for appropriate treatment, infection control, and public health management. Currently, one of the challenges in clinical microbiology is the discrimination of mycobacterial sub-species within the M. tuberculosis complex (MTBC). Our objective was to evaluate the ability of a biosafe mycobacterial lipid-based approach to identify MTBC cultures and sub-species.MethodsA blinded study was conducted using 90 mycobacterial clinical isolate strains comprising MTBC strains sub-cultured in Middlebrook 7H11 medium supplemented with 10% oleic-acid, dextrose, catalase growth supplement and incubated for up to 6 weeks at 37°C and using the following seven reference strains (M. tuberculosis H37Rv, M canettii, M. africanum, M. pinnipedii, M. caprae, M. bovis, and M. bovis BCG) grown under the same conditions, to set the reference lipid database and test it against the 90 MTBC clinical isolates. Cultured mycobacteria were heat-inactivated and loaded onto the matrix-assisted laser desorption/ionization target followed by the addition of the matrix. Acquisition of the data was performed using the positive ion mode.ResultsBased on the identification of clear and defined lipid signatures from the seven reference strains, the method that we developed was fast (<10 minutes) and produced interpretable profiles for all but four isolates, caused by poor ionization giving an n = 86 with interpretable spectra. The sensitivity and specificity of the matrix-assisted laser desorption/ionization time of flight were 94.4 (95% CI, 86.4–98.5) and 94.4 (95% CI, 72.7–99.9), respectively.ConclusionsMycobacterial lipid profiling provides a means of rapid, safe, and accurate discrimination of species within the MTBC.     

Detection of Mycobacterium tuberculosis in Blood by Use of the Xpert MTB/RIF Assay

We have developed a novel blood lysis-centrifugation approach for highly sensitive Mycobacterium tuberculosis detection in large volumes of blood with the Xpert MTB/RIF assay. One through 20 ml of blood was spiked with 0.25 to 10 CFU/ml of the M. tuberculosis surrogate M. bovis BCG. Multiple replicates of each sample were processed by a new lysis-centrifugation method and tested with the Xpert MTB/RIF assay. The assay was very sensitive with increased blood volumes. In the 20-ml samples, BCG was detected in blood spiked with 10, 5, 1, and 0.25 CFU/ml 100, 100, 83, and 57% of the time, respectively, compared to 100, 66, 18, and 18%, of the time, respectively, in 1-ml blood samples. Assay sensitivity was influenced by the type of anticoagulant used, with acid-citrate-dextrose solution B (ACD-B) providing the best results. A limit of detection of 10 CFU/ml was established with BCG spiked into ACD-B-treated blood, and 92, 36, and 33% of the samples with 5, 1, and 0.5 CFU/ml, respectively, were assay positive. The lysis buffer was stable both at room temperature and at 4°C for 2 months. The assay was tested with blood stored for 8 days without a change in sensitivity as measured by cycle threshold. This new assay format extends the capability of the Xpert MTB/RIF test, enabling up to 20 ml of blood to be tested rapidly for the presence of M. tuberculosis. This approach may be a useful method to detect extrapulmonary tuberculosis and the risk of death in immunocompromised patients.     

Performance of Cepheid® Xpert MTB/RIF® and TB-Biochip® MDR in two regions of Russia with a high prevalence of drug-resistant tuberculosis

The purpose of this study was to assess the performance of Cepheid® Xpert MTB/RIF® (“Xpert”) and TB-Biochip® MDR (“TB-Biochip”). Sputum specimens from adults with presumptive tuberculosis (TB) were homogenized and split for: (1) direct Xpert and microscopy, and (2) concentration for Xpert, microscopy, culture [Lowenstein–Jensen (LJ) solid media and Mycobacteria Growth Indicator Tube® (MGIT)], indirect drug susceptibility testing (DST) using the absolute concentration method and MGIT, and TB-Biochip. In total, 109 of 238 (45.8 %) specimens were culture-positive for Mycobacterium tuberculosis complex (MTBC), and, of these, 67 isolates were rifampicin resistant (RIF-R) by phenotypic DST and 64/67 (95.5 %) were isoniazid resistant (INH-R). Compared to culture of the same specimen, a single direct Xpert was more sensitive for detecting MTBC [95.3 %, 95 % confidence interval (CI), 90.0–98.3 %] than direct (59.6 %, 95 % CI, 50.2–68.5 %) or concentrated smear (85.3 %, 95 % CI, 77.7–91.1 %) or LJ culture (80.8 %, 95 % CI, 72.4–87.5 %); the specificity was 86.0 % (95 % CI, 78.9–91.3 %). Compared with MGIT DST, Xpert correctly identified 98.2 % (95 % CI, 91.5–99.9 %) of RIF-R and 95.5 % (95 % CI, 85.8–99.2 %) of RIF-susceptible (RIF-S) specimens. In a subset of 104 specimens, the sensitivity of TB-Biochip for MTBC detection compared to culture was 97.3 % (95 % CI, 91.0–99.5 %); the specificity was 78.1 % (95 % CI, 61.5–89.9 %). TB-Biochip correctly identified 100 % (95 % CI, 94.2–100 %) of RIF-R, 94.7 % (95 % CI, 76.7–99.7 %) of RIF-S, 98.2 % (95 % CI, 91.4–99.9 %) of INH-R, and 78.6 % (95 % CI, 52.1–94.2 %) of INH-S specimens compared to MGIT DST. Xpert and Biochip were similar in accuracy for detecting MTBC and RIF resistance compared to conventional culture methods.     

Evaluation of Xpert MTB/RIF for Detection of Tuberculosis from Blood Samples of HIV-Infected Adults Confirms Mycobacterium tuberculosis Bacteremia as an Indicator of Poor Prognosis

Tuberculosis (TB) remains a leading cause of death among HIV-infected adults, in part because of delayed diagnosis and therefore delayed initiation of treatment. Recently, the Gene-Xpert platform, a rapid, PCR-based diagnostic platform, has been validated for the diagnosis of TB with sputum. We have evaluated the Xpert MTB/RIF assay for the diagnosis of Mycobacterium tuberculosis bacteremia and investigated its impact on clinical outcomes. Consecutive HIV-infected adults with fever and cough presenting to Queen Elizabeth Central Hospital, Blantyre, Malawi, were recruited and followed up for 2 months. At presentation, three sputum samples were examined by smear, culture, and Xpert MTB/RIF assay for the presence of M. tuberculosis and blood was drawn for PCR with Xpert, for mycobacterial culture (Myco/F Lytic), and for aerobic culture. One hundred four patients were recruited, and 44 (43%) were sputum culture positive for M. tuberculosis. Ten were Xpert blood positive, for a sensitivity of 21% and a specificity of 100%. The 2-week mortality rate was significantly higher among patients who were Xpert blood positive than among those who were negative (40% versus 3%; multivariate odds ratio [OR] for death if positive, 44; 95% confidence interval [CI], 3 to 662). This effect persisted on assessment of the mortality rate at 2 months (40% versus 11%; OR, 5.6; 95% CI, 1.3 to 24.6). When screening uncomplicated patients presenting with a productive cough for pulmonary TB, Xpert blood offers no diagnostic advantage over sputum testing. Despite this, Xpert blood positivity is highly predictive of early death and this test rapidly identifies a group of patients in urgent need of initiation of treatment.     

Rolling Circle Amplification for Direct Detection of rpoB Gene Mutations in Mycobacterium tuberculosis Isolates from Clinical Specimens

Rapid and accurate detection of multidrug resistance (MDR) in Mycobacterium tuberculosis is essential to improve treatment outcomes and reduce global transmission but remains a challenge. Rifampin (RIF) resistance is a reliable marker of MDR tuberculosis (TB) since by far the majority of RIF-resistant strains are also isoniazid (INH) resistant. We have developed a rapid, sensitive, and specific method for detecting the most common mutations associated with RIF resistance, in the RIF resistance determining region (RRDR) of rpoB, using a cocktail of six padlock probes and rolling circle amplification (RCA). We used this method to test 46 stored M. tuberculosis clinical isolates with known RIF susceptibility profiles (18 RIF resistant, 28 susceptible), a standard susceptible strain (H37Rv, ATCC 27294) and 78 M. tuberculosis culture-positive clinical (sputum) samples, 59 of which grew RIF-resistant strains. All stored clinical isolates were correctly categorized, by the padlock probe/RCA method, as RIF susceptible or resistant; the sensitivity and specificity of the method, for direct detection of phenotypically RIF-resistant M. tuberculosis in clinical specimens, were 96.6 and 89.5%, respectively. This method is rapid, simple, and inexpensive and has the potential for high-throughput routine screening of clinical specimens for MDR M. tuberculosis, particularly in high prevalence settings with limited resources.     

Potential for Use of the Seegene Anyplex MTB/NTM Real-Time Detection Assay in a Regional Reference Laboratory

Requests for direct molecular diagnosis of mycobacterial disease are increasingly warranted. The Anyplex MTB/NTM assay demonstrates sensitivities, specificities, and positive and negative predictive values of 1.00, 0.96, 0.93, and 1.00 for Mycobacterium tuberculosis complex (MTBC) and 1.00, 0.97, 0.75, and 1.00 for nontuberculous mycobacteria (NTM) detection, respectively, making it a suitable screening test for mycobacterial detection.