Hybrid revision total hip arthroplasty: a 7-year follow-up study

The hybrid method for fixation of total hip arthroplasty (THA) has shown excellent results during the first decade in primary operations. To investigate its role in revision surgery, data on 48 revision THAs in 45 patients that met the inclusion criteria were gathered prospectively, using HGP cementless acetabular components and precoated cemented femoral components inserted with so-called second generation femoral cementing technique in each case. For the 48 hips during an average follow-up period of 7.4 years, no acetabular components was loose or had pelvic lysis. One acetabular component was revised for recurrent dislocation; 1 of 48 femoral components was revised for aseptic loosening and 1 for periprosthetic fracture. Three additional femoral stems (6%) were loose. In this small series, the hybrid concept for revision of failed nonseptic THAs has shown excellent results.     

The Charnley versus the Spectron hip prosthesis: radiographic evaluation of a randomized, prospective study of 2 different hip implants.

A total of 410 hips were randomized to treatment with either a Charnley (206 hips) or a Spectron (204 hips) total hip arthroplasty. The patients were operated on by a standardized procedure using a contemporary cementing technique and were followed after 1, 3, 5 to 6, and 10 years. The postoperative radiographs showed a significantly increased rate of malalignment and consequently low grade of cement mantle quality of the Charnley stem compared to the Spectron. No differences concerning cement mantle quality or positioning were found between the Charnley ogee cup and the metal-backed Spectron. Evaluation of the follow-up radiographs revealed 10 loose Charnley stems and 1 loose Spectron stem and 4 loose Charnley ogee cups and 23 loose Spectron metal-backed cups. The differences of revision rate for the femoral and acetabular components of the 2 prostheses were significant (P = .03, Charnley femoral component more frequent; P = .03, Spectron acetabular component more frequent). The radiographic evaluation strengthened this disparity. Poor wear characteristics of the metal-backed Spectron cup are perhaps the main reason for the highly significant difference in mechanical failure rate between the 2 cups. We therefore propose that metal-backing of cemented cups should be avoided, at least when combined with larger femoral heads. The difficulty in positioning the Charnley stem with an adequate cement mantle, especially in the absence of trochanteric osteotomy, might explain the inferior Charnley stem longevity in this study.     

Polyethylene wear and osteolysis with a new modular titanium acetabular component: results at 7 to 13 years

The first-generation and second-generation modular titanium fiber-metal acetabular components were notable for high rates of pelvic osteolysis and liner dislodgment. This is a prospective, consecutive study of 111 new modular titanium-fiber metal acetabular components with a novel polyethylene locking mechanism at a mean follow-up of 9.5 years (range, 7-13 years). The polyethylene was gamma-irradiated in air in 58 hips and gamma-irradiated in nitrogen in 54 hips. No acetabular component migrated, none were revised, and there was no liner dislodgment. Pelvic osteolysis was seen in only 2 hips. The mean linear wear rate was 0.085 mm/y (range, 0.001-0.3 mm/y). There was a significantly lower rate of wear with polyethylene liners sterilized by gamma-irradiation in nitrogen (P = .0001). The high rate of success and low rate of polyethylene wear and pelvic osteolysis at this length of follow-up may be related to the new design features of this modular acetabular component.     

Charnley型人工全髋置换术后10年以上随访的X线分析

目的:通过对骨水泥固定的Charnley型人工全髋置换术患者10年以上X线随访,探讨骨水泥型人工全髋的固定效果、松动及影响寿命的因素等。方法:获得10年以上随访的38例45髋作为研究对象,平均随访14.6年。X线包括术后及最后随访时髋关节正侧位片。结果:髋臼假体松动有24髋(53％),其中明显松动(definite loosening)14髋(13％),可能松动(possible loosening)10髋(22％)。臼杯磨损共35髋(78％),平均磨损率为0.123mm/年;股骨假体柄松动有12髋(27％),其中明显松动8髋(18％),可能松动4髋(9％)。假体柄周围骨溶解18髋(40％)。本组45髋中8髋(18％)行翻修术,其中4髋因髋臼假体松动单纯髋臼假体翻修,其余4例行髋臼和股骨假体全部翻修。结论:骨水泥固定的Charnley型人工全髋置换术后10年以上长期随访结果,股骨假体的固定效果较好,但髋臼假体的固定效果并不满意。聚乙烯臼杯磨损不可避免,作为人工关节材料,聚乙烯对金属的关节组合应重新考虑。采用改良的骨水泥固定方法对人工全髋假体的早期稳定性和长期寿命非常重要。从髋臼假体的固定效果来看,金属臼(metal shell)假体的非骨水泥固定效果优于聚乙烯臼的骨水泥固定效果。     

Arthopor 2 acetabular component with screw fixation in primary hip arthroplasty: A 7- to 9-year follow-up study

The first 100 consecutive primary hip arthroplasties with the Arthopor 2 acetabular component (Joint Medical Products, Stamford, CT) with supplemental screw fixation performed by the senior author were prospectively studied. The mean patient age was 57 years. Seventy-seven cemented and 23 cementless stems were placed, with 32-mm femoral heads used in most of the patients. Eighty-six hips were reviewed at 7–8.8 years (mean, 7.8 years). The mean Harris hip score at final follow-up evaluation was 94 points. No cups have been revised, although 2 cups in patients with radiation osteonecrosis were loose radiographically. One patient underwent revision of a severely worn liner. Despite a relatively high mean linear wear rate of 0.27 mm/y (range, 0.13–0.57 mm/y), no radiographic evidence of pelvic osteolysis was seen. The Arthopor 2 cup performed well with respect to pelvic osteolysis, despite the presence of substantial polyethylene debris. The relatively high polyethylene wear rate is attributed in part to the younger patient population and the use of 32-mm femoral heads paired with thin polyethylene liners.     

Analysis of retrieved uncemented porous-coated acetabular components in patients with and without pelvic osteolysis

Retrieved polyethylene liners and femoral heads from a consecutive series of revision components of one design were examined. All patients had Long-Term Stable Fixation (OsteoTechnology International, Timonium, Md) total hip arthroplasties (THAs) implanted between 1987 and 1992. The retrieved femoral heads and liners from patients with osteolysis were compared to those without osteolysis. Patients with osteolysis had significantly thinner polyethylene (5.1 mm versus 7.4 mm, P<.01 ) and a higher linear wear rate (0.5 mm/y versus 0.3 mm/y, P=.05). The average femoral head surface roughness also was significantly greater in patients with osteolysis (67 nm versus 35 nm, P<.05). Patients with osteolysis had more total volumetric wear, total linear wear, and volumetric wear rate compared to patients without osteolysis. Age, obesity index, time in situ, and cup inclination were not different between the two groups. Excessive polyethylene wear, probably accelerated by surface roughness of the femoral heads, was associated with pelvic osteolysis in these patients.     

Primary total hip arthroplasty with Asian-type AML total hip prosthesis: follow-up for more than 10 years

BACKGROUND: We retrospectively reviewed 137 consecutive total hip arthroplasties performed with AML-A stems and Tri-Lock cups to see whether design modifications made to these components would achieve durable biological fixation in the Japanese population in whom developmental dysplasia of the hip (DDH) is relatively common. Patients from our initial clinical series using these components are available for more than 10 years' follow-up. METHODS: Between April 1988 and June 1994, we performed 137 total hip arthroplasties using the AML-A prosthesis for the patients with osteoarthritis of the hip joint. We excluded 26 hips with less than 10 years' follow-up and five hips from patients who died before the 10-year follow-up. The mean follow-up for the 105 remaining THAs is 155.2 months (range 120-237 months). The average age of these patients at the time of surgery was 53.1 years (range 22-81 years). RESULTS: In total, 17 THAs required component revisions. In seven cases, the first revision was limited to a liner exchange for polyethylene wear or osteolysis. Another seven hips underwent revision surgery for recurrent dislocation. Three cups have been revised owing to aseptic loosening. Because of the high incidence of wear-related revisions, Kaplan-Meier survivorship at the 15-year follow-up, using acetabular component revision for any reason as an endpoint, was 75.0% (95% CI 69.4%-83.8%). In contrast, no revision of the femoral stem was performed. Severe stress shielding occurred in 12 hips. Thigh pain was mild, however, and all of the femoral stems remained stable. CONCLUSIONS: Despite revisions for wear-related complications, the fixation achieved with these porous-coated components remained durable throughout the 15-year follow-up. Acetabular osteolysis has been associated with cup reoperation, but femoral stress shielding has never resulted in stem loosening.     

Polyethylene wear and synovitis in total hip arthroplasty: a sonographic study of 48 hips

Forty-six patients (48 hips), operated on with cemented total hip arthroplasty (THA) because of arthrosis, were examined radiographically and sonographically at 10-year follow-up. Polyethylene wear of acetabular cups was measured on conventional non-weight-bearing pelvic radiographs, and the volume of polyethylene debris was calculated. Radiographic signs of loosening were identified. The capsular distance (ie, thickness of the synovium or synovial contents) was measured sonographically. We found a significant correlation between increased volumetric wear and increased capsular distance. Hips with radiographically loose acetabular components had significantly greater volumetric wear and capsular distance than those without signs of acetabular loosening. This relationship was not observed in hips with radiographically loose femoral components. In cemented THA, the volume of polyethylene wear debris and the thickness of the synovium and the synovial contents are related. In the event of radiographic loosening of the acetabular component, they are both increased.     

H/G非骨水泥人工全髋关节置换术后聚乙烯内杯磨损临床研究

目的 对H/G非骨水泥人工全髋关节置换术后聚乙烯内杯的磨损及髋臼周围骨溶解的情况进行总结.方法 我院1991至1995年共进行58例(65髋)H/G非骨水泥人工全髋关节置换,其中35例(40髋)获得10年以上随访.对这35例(40髋)患者获得随访的病例,采用计算机数字化方法测量髋臼聚乙烯内杯的二维线性磨损.结果 35例40髋均有不同程度的磨损,磨损范围2～8 mm,平均磨损为(0.32±0.31)mm/年.10髋聚乙烯磨损超过6 mm,髋臼假体周围的骨溶解严重,并伴有金属假体的移位,其中5髋聚乙烯内杯完伞磨透,金属股骨头与金属髋臼相接触;5髋聚乙烯内杯磨损严重伴明显骨溶解,内杯松动.2髋聚乙烯内杯脱位.共实施翻修手术12例,包括更换聚乙烯内杯和金属股骨头2例、金属闩杯翻修2例、全髋翻修8例.28髋在髋臼侧发现骨溶解,其中14髋股骨侧亦有骨溶解发生.结论 本组病例所观测到的H/G髋臼聚乙烯内杯的磨损程度超过文献所报道,而且由于磨损产生的大量磨屑,导致假体周围出现明显骨溶解,直接影响到假体的稳定.关节置换术后应定期随访,避免出现严重骨溶解后增加翻修手术的困难.     

Revision total hip arthroplasty in juvenile chronic arthritis: 17 revisions in 11 patients followed for 4-12 years

BACKGROUND: Revision total hip arthroplasty (THA) in patients with juvenile chronic arthritis (JCA) is complicated by the young age of the patient, poor bone stock and small physical proportions. We report the complications and outcome of a prospective series of 17 revision THAs in Charnley class C JCA patients. METHODS: 15 acetabular components and 10 femoral components were revised. 13 cementless cups, 2 reconstruction/roof rings and cemented cups, and 4 cemented and 6 cementless femoral stems were implanted. 2 proximal femoral allografts and 1 strut allograft were used. Age at revision was 32 (21-53) years. Follow-up averaged 7 (4-12) years. RESULTS: 2 patients with cemented femoral stems developed loosening, osteolysis and fracture. Both were successfully revised to long-stem cementless implants with strut/proximal femoral allografts. 1 loose, worn cementless cup with osteolysis was revised. 1 patient with a peri-operative infection and late acetabular fracture had a loose, non-revised cementless cup. 1 case of sciatic nerve palsy occurred after revision using a reconstruction ring. 1 late infection necessitated resection arthroplasty. Harris hip scores improved from 53 (34-85) to 76 (47-96). INTERPRETATION: Revision THA in JCA has a substantial complication rate, even in experienced hands. The problem of obtaining long-term stable fixation, osteolysis, and replenishment of lost bone stock are major difficulties.     

Hybrid total hip arthroplasty in patients under the age of fifty: A five- to ten-year follow-up

In 37 patients, 45 total hip replacements were performed using contemporary cementing techniques, an uncemented Harris-Galante I acetabular component and a cemented precoated Iowa femoral component in patients under the age of 50 at the time of their surgery; 36 patients with 43 hybrid hips were living, 1 patient with 2 hybrid hips was decreased. No patients were lost to follow-up. At 5- to 10-year follow-up, eight hips were revised for aseptic loosening. No acetabular components, and eight femoral components (18%) were revised for aseptic loosening. When looking at radiographic results, including revision as well as those components that were probably or definitely loose on radiographs, 0 acetabular components and 11 femoral components (24%) were radiographically loose. These results demonstrate the excellent durability of the uncemented Harris-Galante acetabular component in the younger patient. However, the Iowa grit-blasted methyl methacrylate precoated femoral component had a magnitude increase in the prevalence of revision for aseptic femoral loosening when compared to the senior author's long-term Charnley results in this age group. The authors attribute the failure to the rough surface finish applied to the femoral component. However, the polymethyl methacrylate proximal precoating and the femoral component design may also contribute to the femoral failures.     

Radiographic and clinical analysis of cementless acetabular fixation in total hip arthroplasty

Tofruetancloc nthisoitpnru sac.rttih oOrnorpig ltaiensctahylln y(i,qTuH emAa)jfoo irrs a Td HweteAelrli-o etrseatctaehbdnliiqs huheeidpsutilized bone cement for fixation,but loosening rate ofthe acetabular component was very high because ofbone cement tec…     

20-year experience with cemented primary and conversion total hip arthroplasty using so-called second-generation cementing techniques in patients aged 50 years or younger

We present the 20-year experience of 47 hips in 40 patients aged 50 years or younger with cemented primary total hip arthroplasty using second-generation femoral cementing techniques. Average follow-up duration in the 23 patients living at least 17 years was 18.2 years. Overall, 18 hips (38%) had components revised or removed for any reason, at an average duration of 12.6 years. Every revision or reoperation involved removing the acetabular component. Of these 18 acetabular components, 15 (32%) were revised for aseptic loosening. Eleven additional acetabular components were loose by radiographic criteria at final follow-up, yielding prevalence of aseptic acetabular loosening (55%). Four femoral components (8%) were revised for osteolysis without loosening, and 3 (6%) were revised for aseptic loosening. Femoral osteolysis, with or without component loosening, led to revision in 5 ( 11%) hips compared with 6% for aseptic loosening alone. Osteolysis was the primary problem leading to acetabular and femoral component revision in this series of people < or = 50 years old over the first 20 years after the index operation.     

Poor Short Term Outcome with a Metal-On-Metal Total Hip Arthroplasty

Metal-on-metal (MoM) bearings for total hip arthroplasty (THA) have come under scrutiny with reports of high failure rates. Clinical outcome studies with several commercially available MoM THA bearings remain unreported. We evaluated 78 consecutive MoM THAs from a single manufacturer in 68 patients. Sixty-six received cobalt–chrome (CoCr) monoblock and 12 received modular titanium acetabular cups with internal CoCr liners. Femoral components were titanium with modular necks. At average 2.1 years postoperatively, 12 THAs (15.4%) demonstrated aseptic failure (10 revisions, 2 revision recommended). All revised hips demonstrated capsular necrosis with positive histology reaction for aseptic lymphocytic vasculitis-associated lesions/adverse local tissue reactions. Prosthetic instability following revision surgery was relatively common. Female gender was a strong risk factor for failure, though smaller cups were not. Both monoblock and modular components fared poorly. Corrosion was frequently observed around the proximal and distal end of the modular femoral necks.     

Total hip arthroplasty using an Omniflex modular system: 5 to 12 years followup

We evaluated intermediate-term results of primary cementless Omniflex prostheses. Forty-nine patients (57 hips) with a mean age of 44 years were observed for an average of 8.6 years. The average Harris hip score was 46 points before surgery and 87 points at final followup. Revision was done in five hips (9%) in five patients. Two acetabular components (4%) were revised because of breakage of the polyethylene insert. Three femoral components (5%) were revised because of aseptic loosening. Six femoral components (10%) were radiographically loose. Overall, 11 hips (19%) were considered mechanical failures. Osteolysis was identified around three acetabular components (5%) and around 20 femoral components (35%). Nine hips (16%) had femoral osteolysis around the distal stem tip. The average annual polyethylene liner wear was 0.18 mm. These results were inferior to those using other recent cementless total hip systems.     

Total hip arthroplasty with a cementless acetabular component and a cemented femoral component in the treatment of Chinese patients with femoral head necrosis

The purpose of this study was to evaluate midterm clinical and radiographic outcomes associated with hybrid total hip arthroplasty in a consecutive series of 86 Chinese patients (93 hips) with osteonecrosis of the femoral head, which revealed that the mean Harris hip score increased from 39 +/- 6.0 points before operation to 90.4 +/- 4.6 points at the latest follow-up. There was pelvic osteolysis in one hip (1%), which required revision, and some small focal areas of femoral osteolysis in 12 hips (13%) were observed. The mean linear wear rate was 0.143 +/- 0.05 mm/y (0.02-0.45 mm/y). No loosening of the components was observed radiographically. The survival rate of the acetabular and femoral components for revision was 98% (95% confidence interval, 0.96-1.0) and 100% (95% confidence interval, 0.95-1.0). Hybrid total hip arthroplasty in patients with osteonecrosis of the femoral head had a satisfactory clinical and radiographic outcome at a minimum 5 years of follow-up. Because polyethylene wear and osteolysis cannot be avoided, the long-term effect should be further studied.     

Primary total hip replacement with a noncemented acetabular component: minimum 5-year clinical follow-up

The results of 123 total hip replacements with a noncemented Harris-Galante I acetabular component were reviewed (minimum 5-year clinical follow-up). The average clinical follow-up was 7 years (range, 5-10.8 years). No acetabular components were revised for loosening. One cup was revised for recurrent dislocation. In 3 cases, the acetabular liner was replaced at the time of femoral component revision (aseptic loosening), and in 1 case, a liner was revised because of recurrent dislocations. Of the hips, 92 had a complete set of radiographs for analysis. None of the acetabular components had migrated. Of the 92 acetabular components, 90 were considered radiographically stable (98%). Of these hips, 24 had linear radiolucencies of < or =2 mm in < or =2 of 4 zones and were considered stable. Two cups (2%) were considered possibly unstable. One of these had a linear radiolucent line in 3 zones, and the other had an osteolytic lesion measuring 6 x 11 mm in greatest dimensions. No acetabular components were definitely unstable. The average Harris Hip Score improved from 50 points (range, 17-89 points) preoperatively to 95 points (range, 74-99 points) at the latest follow-up examination. The average Hospital for Special Surgery hip score improved from 21 points (range, 10-31 points) preoperatively to 38 points (range, 27-40) at the last follow-up examination. Noncemented acetabular fixation with the Harris-Galante I component showed excellent clinical results at a minimum of 5 years' follow-up.     

Revision total hip arthroplasty in juvenile chronic arthritis: 17 revisions in 11 patients followed for 4–12 years

Background Revision total hip arthroplasty (THA) in patients with juvenile chronic arthritis (JCA) is complicated by the young age of the patient, poor bone stock and small physical proportions. We report the complications and outcome of a prospective series of 17 revision THAs in Charnley class C JCA patients.

Methods 15 acetabular components and 10 femoral components were revised. 13 cementless cups, 2 reconstruction/roof rings and cemented cups, and 4 cemented and 6 cementless femoral stems were implanted. 2 proximal femoral allografts and 1 strut allograft were used. Age at revision was 32 (21–53) years. Follow-up averaged 7 (4–12) years.

Results 2 patients with cemented femoral stems developed loosening, osteolysis and fracture. Both were successfully revised to long-stem cementless implants with strut/proximal femoral allografts. 1 loose, worn cementless cup with osteolysis was revised. 1 patient with a peri-operative infection and late acetabular fracture had a loose, non-revised cementless cup. 1 case of sciatic nerve palsy occurred after revision using a reconstruction ring. 1 late infection necessitated resection arthroplasty. Harris hip scores improved from 53 (34–85) to 76 (47–96).

Interpretation Revision THA in JCA has a substantial complication rate, even in experienced hands. The problem of obtaining long-term stable fixation, osteolysis, and replenishment of lost bone stock are major difficulties.     

Ten- to 15-Year Clinical and Radiographic Results for a Compression Molded Monoblock Elliptical Acetabular Component

The aim of this study was to report the long-term results from a previously published midterm follow-up of a titanium monoblock, elliptical acetabular component. A total of 258 primary total hip arthroplasties (212 patients) with a monoblock, acetabular component were followed up for a mean period of 11.1 years (10-15). Average yearly wear rate was 0.08 mm/y (0.0009-0.32). Acetabular radiolucencies were present in 6 hips (2.4%); all were nonprogressive and present in acetabular zone I. Acetabular osteolysis was present in 5 patients (5 hips, 1.9%); all cups were stable. Four acetabular components were revised, 3 because of recurrent instability. No acetabular components were revised for polyethylene wear or dissociation, acetabular osteolysis, loosening, or deep infection. This monoblock design demonstrates excellent long-term survival and low rate of osteolysis.     

Alumina-on-alumina total hip arthroplasty: a minimum 18.5-year follow-up study.

BACKGROUND: The purpose of this retrospective study was to report the results, after a minimum of 18.5 years of follow-up, in a consecutive series of total hip arthroplasties performed with an alumina-on-alumina combination. METHODS: One hundred and eighteen consecutive total hip arthroplasties were performed in 106 patients between 1979 and 1980. The prostheses combined a 32-mm alumina head and an all-alumina socket. Both components were cemented in eighty-five hips, both components were implanted without cement in twenty-nine, and only the stem was cemented in four. The mean age of the patients at the time of the index arthroplasty was 62.2 years (range, thirty-two to eighty-nine years). RESULTS: At the 18.5 to 20.5-year follow-up evaluation, forty-five patients (fifty-one hips) were alive and had not had a revision, twenty-five patients (twenty-five hips) had undergone revision of one or both components, twenty-seven patients (thirty hips) had died, and nine patients (twelve hips) had been lost to follow-up. The mean Merle d'Aubigné hip score (and standard deviation) was 16.2 +/- 1.8 points at the latest follow-up evaluation. The rate of survival at twenty years, with revision for any reason as the end-point, was 85.6% for the cementless cups compared with 61.2% for the cemented cups and 84.9% for the cementless stems compared with 87.3% for the cemented stems. Wear of the prosthetic components was undetectable on plain radiographs. Periprosthetic cystic or scalloped lesions requiring the use of allograft bone during revision were present in three of the twenty-five revised hips. In addition, seven hips had moderate acetabular osteolysis treated with a 4-mm-larger cup. No fracture of the alumina socket or head was recorded. The mean acetabular wear rate in this series was <0.025 mm/yr. CONCLUSION: With the alumina-on-alumina total hip arthroplasty, minimal wear rates and limited osteolysis can be expected up to twenty years after the operation, provided that sound acetabular component fixation is obtained.