Long-Term Wear-Related Complications of Cross-Linked Versus Conventional Polyethylene After Total Hip Arthroplasty: A Meta-Analysis

BackgroundHighly cross-linked polyethylene (HXLPE) liners have been developed to address the wear-related problems associated with conventional polyethylene (CPE) such as osteolysis or aseptic loosening in total hip arthroplasty (THA). In this systematic meta-analysis, we compared the long-term efficacy in preventing radiological osteolysis and revision surgery between HXLPE and CPE.MethodsWe included 14 studies that compared HXLPE and CPE reporting the incidence of wear-related complications with a minimum follow-up of 10 years. We investigated 5 wear-related complications: osteolysis, excessive wear, linear wear rate, revision surgery due to wear, and progress of osteolysis/aseptic loosening. We conducted a pair-wise meta-analysis to estimate odds ratio (OR) and a proportional meta-analysis to estimate the incidence of each complication.ResultsAmong 1,175 THAs, 220 osteolysis and 78 wear-related revisions were detected. The use of HXLPE reduced the risk of overall osteolysis (OR 0.30; P = .001), excessive wear (OR 0.10; P < .001), linear wear rate (weighted mean difference 0.09; P < .001), the risk of overall wear-related revisions (OR 0.06; P < .001), and revisions due to aseptic loosening (OR 0.23; P = .015). As per the proportional meta-analysis, the pooled prevalence of osteolysis, excessive wear, and the overall wear-related revision rate were 14%, 8%, and 3% in HXLPE and 25%, 33%, and 20% in CPE, respectively.ConclusionThe current evidence shows that HXLPE dramatically reduced the rate of osteolysis and wear-related revision surgery. However, as polyethylene wear and osteolysis still lead to revision surgery, ongoing clinical and retrieval studies are required to analyze long-term outcomes.     

Total Hip Arthroplasty Using Highly Cross-Linked Polyethylene in Patients Younger Than 50 Years With Minimum 10-Year Follow-Up

The purpose of this study was to investigate the relatively long-term outcomes in 50 patients (54 hips) younger than 50 years of age who underwent total hip arthroplasty using highly cross-linked polyethylene (HXLPE) liners. With a minimum follow-up of 10 years, mean age at time of surgery was 38.9 years (range, 15–50 years). Survivorship was 100%. There was no radiographic evidence of osteolysis or component loosening. Mean steady-state femoral head penetration rate was 0.020 ± 0.0047 mm/yr. Clinical outcomes were excellent, with mean Harris hip score of 91.2 (range, 72–99) points at final follow-up.     

Conventional Polyethylene in Total Hip Arthroplasty in Young Patients: Survivorship,Wear Analysis,and Clinical Outcomes Between 15 and 20 Years

Background

Total hip arthroplasty (THA) remains a successful procedure for most patients. However, there is a paucity of information regarding the long-term performance of conventional polyethylene (CPE) bearings in young patients undergoing THA.

Long-Term Results of Porous-Coated Anatomic Total Hip Arthroplasty for Patients With Osteoarthritis of the Hip

Between 1986 and 1997, 136 porous-coated anatomic (PCA) total hip arthroplasties were performed for patients with osteoarthritis of the hip, and data were available for 60 hips at final follow-up (mean follow-up, 15.2 years). Of these, 18 hips had undergone revision: 12 for the acetabular component, 10 for the femoral component, and 4 for both components. Survival rate at 23 years postoperatively was 60% for the acetabular component and 82% for the femoral component. Multivariate Cox proportional hazards regression showed that annual polyethylene wear rate, size, and abduction angle of the acetabular component were significantly associated with acetabular component revision surgery, and that annual polyethylene wear rate and filling ratio of the femur were associated with femoral component revision surgery.     

Prospective Randomized Trial Comparing Alumina Ceramic-on-Ceramic With Ceramic-On-Conventional Polyethylene Bearings in Total Hip Arthroplasty

This prospective randomized study aims to compare the outcome between an alumina ceramic-on-ceramic (CC) articulation with a ceramic on ultra-high-molecular-weight polyethylene articulation (CP). Fifty-six hips in 55 patients with mean age 42.2 (range, 19-56) each received uncemented components, a 28-mm alumina head with randomization of acetabular liner. Mean St Michael's outcome score for each group with up to 10 years follow-up (median, 8 years; range, 1-10) was 22.8 and 22.9, respectively (P = .819). Wear was identified in all but 1 CP replacement, but only 12 of the 23 CC. Mean wear in the CP group was 0.11 mm/y and 0.02 mm/yr in the CC group (P < .001). Other than significantly greater wear in the polyethylene group, there was no significant difference in midterm outcome between the 2 groups.     

10-Year Follow-Up Wear Analysis of First-Generation Highly Crosslinked Polyethylene in Primary Total Hip Arthroplasty

Our goal was to report a 10-year follow up of linear penetration rates for HCLPE, and to determine whether a difference exists between penetrations measured on pelvis or hip anterior–posterior radiographs. We reviewed 48 total hip arthroplasties where a first-generation HCLPE liner was used. Femoral head penetration was measured on both AP pelvis and hip radiographs. Total wear and wear rate at 10 years were 1.26 mm and 0.122 mm/y, respectively. The rate decreased significantly after the first 2–3 years, plateauing at a wear rate of 0.05 mm/y for the last 5 years. The AP hip total wear and wear rate were 1.38 mm and 0.133 mm/y respectively, while rates were 1.13 mm and 0.109 mm/y respectively for the pelvis radiographs (P < .05). We found a significant difference in measurements of linear penetration when comparing AP pelvis vs. hip radiographs with lower rates recorded using an AP pelvis.     

Up to 18-Year Follow-Up Wear Analysis of a First-Generation Highly Cross-Linked Polyethylene in Primary Total Hip Arthroplasty

Background

The advent of highly cross-linked polyethylene (HCLPE) has significantly improved total hip arthroplasty survivorship. HCLPE has been shown to improve wear properties in midterm outcomes when compared to traditional polyethylene liners; however, there is a paucity of studies evaluating long-term outcomes. In addition, there is concern that wear rates may accelerate as the implant ages. Thus, the aims of this study are to report on the longest-to-date follow-up of a specific first-generation HCLPE liner and to determine whether there is a change in the annual wear rate over time.

Underweight Patients are at Increased Risk for Complications following Total Hip Arthroplasty

BackgroundGiven the prevalence of obesity in the United States, much of the adult reconstruction literature focuses on the effects of obesity and morbid obesity. However, there is little published data on the effect of being underweight on postoperative outcomes. This study aimed to examine the risk of low body mass index (BMI) on complications after total hip arthroplasty (THA).MethodsA large national database was queried between 2010 and 2020 to identify patients who had THAs. Using International Classification of Disease codes, patients were grouped into the following BMI categories: morbid obesity (BMI>40), obesity (BMI 30 to 40), normal BMI (BMI 20 to 30), and underweight (BMI<20). There were 58,151 patients identified, including 2,484 (4.27%) underweight patients, 34,710 (59.69%) obese patients, and 20,957 (36.04%) morbidly obese patients. Control groups were created for each study group, matching for age, sex, and a comorbidity index. Complications that occurred within 1 year postoperatively were isolated. Subanalyses were performed to compare complications between underweight and obese patients. Statistical analyses were performed using Pearson Chi-squares.ResultsCompared to their matched control group, underweight patients showed increased odds of THA revision (Odds Ratio (OR) = 1.32, P = .04), sepsis (OR = 1.51, P = .01), and periprosthetic fractures (OR = 1.63, P = .01). When directly comparing underweight and obese patients (BMI 30 and above), underweight patients had higher odds of aseptic loosening (OR = 1.62, P = .03), sepsis (OR = 1.34, P = .03), dislocation (OR = 1.84, P < .001), and periprosthetic fracture (OR = 1.46, P = .01).ConclusionMorbidly obese patients experience the highest odds of complications, although underweight patients also had elevated odds for several complications. Underweight patients are an under-recognized and understudied high risk arthroplasty cohort and further research is needed.     

10-Year Follow-Up Wear Analysis of Marathon Highly Cross-Linked Polyethylene in Primary Total Hip Arthroplasty

Background

Short-term and intermediate-term wear rates for highly cross-linked polyethylene (HCLPE) liners in total hip arthroplasty (THA) are significantly lower than published rates for traditional polyethylene liners. The aim of this study was to report the longest-to-date follow-up of a specific HCLPE liner.

Cementless Total Hip Arthroplasty With Alumina-on-Highly Cross-Linked Polyethylene Bearing in Young Patients With Femoral Head Osteonecrosis

We asked whether total hip arthroplasties (THAs) using alumina-on-highly cross-linked polyethylene bearing would improve functional activity and reduce aseptic loosening, polyethylene wear, and osteolysis. Consecutive primary THAs were performed in 71 patients (73 hips) who were younger than 50 years (mean age, 45.5 years) with femoral head osteonecrosis. There were 48 men (50 hips) and 23 women (23 hips). Osteolysis was evaluated using radiographs and computed tomographic scanning. The average follow-up was 8.5 years (range, 7-9 years). The mean preoperative Harris hip score was 50.6 points, which improved to 96 points at the final follow-up. Preoperative functional activity was improved significantly at the latest follow-up. The mean polyethylene linear penetration was 0.05 ± 0.02 mm/y and no hip had aseptic loosening or osteolysis.     

Unexpected Wear of a Uniquely Designed Moderately Cross-Linked Polyethylene in Total Hip Arthroplasty

BackgroundA uniquely designed, non–heat-treated moderately cross-linked acetabular polyethylene liner used in total hip arthroplasty (THA) demonstrated excessive wear during routine follow-up, prompting an evaluation of the linear wear rate.MethodsAll THAs were performed by the senior author. The study group included 38 THAs using the uniquely designed polyethylene in question, compared to a control group of 21 THAs using another moderately cross-linked polyethylene with good 10-year outcomes. Two-dimensional linear head penetration wear measurements were obtained using the Martell Hip Analysis Suite, and retrieval analysis was performed on two liners.ResultsThe study group had a significantly higher average penetration rate of 0.089 mm/y than the control group average rate of 0.047 mm/y (P = .04). Forty-five percent of the study group had a wear rate above the osteolysis threshold (0.1 mm/y), compared to 24% in the control group. Macroscopic analysis of two retrieved liners validated the radiographic findings.ConclusionThe data suggest unexpectedly higher wear rates for a moderately cross-linked polyethylene design, with nearly half of the study group at risk for osteolysis. Further registry or database analyses of this particular moderately cross-linked polyethylene are warranted.     

Eighteen-Year Follow-Up Study of 2 Alternative Bearing Surfaces Used in Total Hip Arthroplasty in the Same Young Patients

BackgroundThis study compares the long-term functional, radiographic, and computed tomography scan outcomes and implant survivorship of ceramic-on-ceramic total hip arthroplasty (C-O-C THA) and ceramic-on-highly cross-linked polyethylene total hip arthroplasty (C-O-HXLPE THA) in the same patients.MethodsIn this randomized, prospective trial conducted between January 1999 and April 2003, 133 patients (266 hips) younger than 55 years were enrolled. Each patient received C-O-C THA in 1 hip and a C-O-HXLPE THA in the other. The mean follow-up was 17.1 years (range, 15-18 years); there were 84 men and 49 women with a mean age of 53 ± 7 years (range, 25-55 years).ResultsAt the latest follow-up, mean Harris hip scores (94 vs 93 points; P = .861), pain scores (43 vs 42 points; P = .651), and patient satisfaction scores (7.8 vs 7.6 points; P = .379) were not different between the 2 groups. Eight hips (3%) in the C-O-C THA had an audible squeaking sound. The mean annual penetration rate of HXLPE was 0.0162 ± 0.032 mm per year. No osteolysis was recorded on radiographs or computed tomography scans in either group. At 17.1 years, the survival rate of the acetabular component was 97% in the C-O-C bearing group and 98% in the C-O-HXLPE bearing group (P = .923). The survival rate of the femoral component was 99% in both groups.ConclusionBoth C-O-C THA and C-O-HXLPE THA functioned well, with no osteolysis at mean of 17.1-year follow-up.     

A Systematic Review of Modern Metal-on-Metal Total Hip Resurfacing vs Standard Total Hip Arthroplasty in Active Young Patients

This systematic review compared 2 treatments for hip disease in active young patients: modern metal-on-metal total hip resurfacing and standard total hip arthroplasty. We conducted a literature search to identify relevant randomized and clinical controlled trials and included 968 patients from 4 trials in our analysis. Our results indicated increased rates of revision, femoral neck fractures, and component loosening among patients who received modern metal-on-metal hip resurfacing. No significant differences in the rates of mortality, dislocation, or deep hip joint infection were found between treatment groups. Hip function scores were similar between the 2 groups, but the resurfacing group showed higher activity levels. These results have provided insufficient evidence to determine whether modern metal-on-metal total hip resurfacing offers clinical advantages over standard total hip arthroplasty.     

The Role of Crosslinked Polyethylene in Reducing Aggregated Costs of Total Hip Arthroplasty in the United States

BackgroundWidespread adoption of crosslinked polyethylene for the acetabular articular surface for total hip arthroplasty has substantially reduced revision rates and dislocation rates. We aim to provide estimates of the resulting magnitude of the annual reduction in aggregated costs of total hip arthroplasty surgery in the United States.MethodsAfter we obtained, from the literature, the contrasting mid-term rates of revisions and dislocations of total hip arthroplasty using conventional polyethylene vs those using crosslinked polyethylene, specifically from only registry studies and prospective, randomized controlled studies, we multiplied these incidence figures by the cost estimates of these failures to generate approximations of the cost savings in the United States from the use of crosslinked polyethylene.ResultsThe estimates suggest that in the United States these savings might be one billion dollars per annual cohort over a 15-year duration.ConclusionThe use of crosslinked polyethylene has reduced substantially the overall costs of total hip arthroplasty surgery in the United States.     

Influence of Prior Hip Salvage Surgery on Outcomes After Total Hip Arthroplasty in Young Patients

Background

As the indications for total hip arthroplasty (THA) have expanded, this procedure is being increasingly performed in young patients. Oftentimes, this population has undergone one or more salvage procedures in an attempt to delay or forestall a THA. However, it is unclear whether patients with prior salvage procedure have higher risk of adverse events.

Early Polyethylene Wear and Excessive Acetabular Granuloma in an Uncemented HA-Coated Total Hip Arthroplasty—Midterm Results of a Prospective Study

This is a prospective review of 135 HA-coated ABG I total hip arthroplasty (THA) systems with a mean clinical and radiographic follow-up of 8.5 years. The 5-year survival rate was 85%, but 22% of the patients were dissatisfied. Revision THA was already indicated in 28% of the patients, with 26% indicated for cup loosening. PE wear was detected by x-ray in 42%. Disproportionate substantial wear with an average linear loss of 2.6 mm at the inner rim of the insert was observed in 23% of the cases. The mean annual wear rate was calculated 0.1–0.25 mm/year. Laboratory examination of the retrieved PE revealed polishing, cracks, and subsurface delamination. Radiographic evidence of acetabular cysts were found to be excessive granuloma during surgery. Polarization microscopy revealed debris particles phagocytized by reticuloendothelial cells. Results confirm the general opinion that aseptic osteolysis is a cell-mediated process driven by the presence of particles generated from wear debris. The findings also suggest that the main reasons for the failure of the first-generation ABG hip system were an insufficient locking mechanism and poor PE congruency, and not solely poor PE quality.     

Wear Analysis of Highly Cross-Linked Polyethylene in Young and Active Patients at Average Fourteen Years: A Concise Follow-Up of a Previous Report

Background

Concerns persist regarding the oxidative stability of annealed highly cross-linked polyethylene (HXLPE) and hence its wear performance especially long term in young and active patients. The purpose of this study is to assess the wear rates and clinical outcomes of a first-generation annealed HXLPE.

The Result of Revision Total Hip Arthroplasty in Patients with Metallosis Following a Catastrophic Failure of a Polyethylene Liner

BackgroundWear cannot be completely prevented after total hip arthroplasty. If severe polyethylene (PE) liner wear develops, the so-called catastrophic failure occurs and metallosis develops. We postulated that longevity of the new implant may be affected after revision surgery for metallosis following a catastrophic failure of a PE liner due to the substantial amount of PE wear particles and infiltration of the metal particles in this catastrophic condition.MethodsTwenty-three hips of 23 patients were identified because they showed metallosis during revision total hip arthroplasties performed in Seoul National University Hospital between January 1996 and August 2004. They were followed for at least 6.5 years after the index revision total hip arthroplasty. The clinical and radiological results of revision total hip arthroplasties in these patients were evaluated.ResultsThe median Harris hip score increased from 60 points before revision total hip arthroplasties to 90 points at the final follow-up. Osteolysis was detected at an average of 9.3 years after revision total hip arthroplasties in 13 hips and acetabular cup loosening at average 9.8 years after revision total hip arthroplasties in 9 hips. With radiographic evidence of osteolysis and loosening as the end points, the 15-year survival rates were 28.2% and 56.0%, respectively.ConclusionsThe survival rate of revision total hip arthroplasty in patients with metallosis following a catastrophic failure of a PE liner was low.