This ex vivo study was performed to investigate the effect of radiotherapy (RT) delivery time on fracture resistance of mandibular premolars filled with Biodentine or gutta-percha/sealer (GPS).
Materials and methodsSeventy-two mandibular premolars were used in this study. Randomly selected 24 teeth were kept intact for the control groups (with and without irradiation). Then, the remaining 48 teeth were randomly assigned into 4 groups (n = 12) according to RT delivery time (irradiated before or after root canal treatment) and obturation materials as follows: Group RT + GPS, Group: GPS + RT, Group RT + Biodentine and Group Biodentine + RT. The samples were either initially endodontically treated and then irradiated or initially irradiated and then endodontically treated with one of the abovementioned materials. The samples were irradiated at 2 Gy per fraction, 5 times a week for a total dose of 60 Gy in 30 fractions over 6 weeks. The roots were embedded in self-polymerizing acrylic resin. The fracture resistance was evaluated in a universal testing machine. Data was analyzed by one-way ANOVA and Games-Howell post hoc test at p < 0.05.
ResultsRadiation therapy significantly reduced fracture resistance of intact teeth (p < 0.05). The highest fracture resistance was observed in intact/non-irradiated teeth and the lowest fracture resistance in Biodentine + RT group (p < 0.05). The effect of RT delivery time was insignificant when GPS was preferred as the root canal filling material (p > 0.05); it was significant when preferring Biodentine (p < 0.05). When RT was applied to the teeth after Biodentine obturation, the fracture resistance decreased significantly compared to the teeth that were obturated with GPS after or before RT application (p < 0.05).
ConclusionBoth RT time and obturation materials (Biodentine or gutta-percha/sealer) affect the fracture resistance of the endodontically treated teeth.
Clinical relevanceEndodontic treatment could be completed with both materials after RT; however, when the endodontic treatment was initially completed and the teeth were subsequently exposed to RT, it was shown that the reinforcement effect of Biodentine decreased.
相似文献This study aims to investigate the association of immune markers with high risk human papillomavirus 16 (HPV 16) infection status and to evaluate the prognostic value of programmed death ligand-1 (PD-L1) in patients with oropharyngeal squamous cell carcinoma (OPSCC).
Materials and methodsThis retrospective study collected 50 cases of HPV positive and HPV negative OPSCC from January 2011 to December 2015. The correlation of CD8 + tumor infiltrating lymphocytes (TILs), programmed death-1 (PD-1), and PD-L1 expression with HPV 16 infection status was analyzed via immunofluorescent staining and quantitative real-time PCR.
ResultsThere was no significant difference in the baseline data between the two groups. Patients with HPV + OPSCC had better prognosis compared to HPV − patients (5-year overall survival [OS], 66% vs. 40%, P = 0.003; 5-year disease specific survival [DSS], 73% vs. 44%, P = 0.001). The expressions of immunity related makers were significantly higher in the HPV + group than the HPV − group (CD8 + TIL: P = 0.039; PD-L1: P = 0.005; PD-1: P = 0.044). Positive CD8 + TIL and PD-L1 were independent factors for better prognosis of OPSCC (DSS, P < 0.001; OS, P < 0.001, respectively). Kaplan–Meier survival analysis indicated that patients with TILs of high HPV + /CD8 + expression were more likely to have better prognosis than those with TILs of low HPV + /CD8 + expression (DSS, P < 0.001; OS, P < 0.001), TILs of high expression of HPV − /CD8 + (DSS, P = 0.010; OS, P = 0.032), and TILs of low expression of HPV − /CD8 + (DSS, P < 0.001; OS, P < 0.001). Furthermore, HPV + /PD-L1 + OPSCC patients had significant better prognosis compared to patients with HPV + /PD-L1 − (DSS, P < 0.001; OS, P = 0.004), HPV − /PD-L1 + (DSS, P = 0.010; OS, P = 0.048) and HPV − /PD-L1 − (DSS, P < 0.001; OS, P < 0.001).
ConclusionsHPV + OPSCC had a significantly better prognosis, and PD-L1 expression was elevated in HPV + OPSCC. PD-L1 positivity might be related to the better prognosis of HPV + OPSCC.
Clinical relevanceThis study provides a theoretical basis and baseline data for the application of immune checkpoint inhibitors in head and neck tumors.
相似文献The purpose of this in vitro study was by using quantitative real-time PCR and culturing to determine the effectiveness of two irrigation and cleaning systems in removing multispecies oral biofilms from root canals.
Material and methodsTwenty extracted human molars were instrumented to size #15/.02 and then cleaned with the GentleWave (GW) System. The teeth were autoclaved to provide the same sterile baseline. The molars were filled with mixed plaque suspended in BHI and centrifuged to inoculate the biofilms. After 2 weeks of incubation, the teeth were randomly divided into two treatment groups. In GW group (26 canals), the teeth were further instrumented to size #15/04, and in PiezoFlow (PF) group (30 canals) to #35/.04. The teeth were then cleaned either with GW System or ProUltra PiezoFlow Active Ultrasonic System using 3% sodium hypochlorite NaOCl, 8% EDTA, and sterile water as irrigants. Samples (S1, S2, and S3) for bacterial cultures were taken from 13 canals before and after instrumentation and after final cleaning. Quantitative real-time PCR was performed from all 56 canals, and universal bacterial, one genus, and one species-specific primers were used to determine the presence of microorganisms in samples from root canals before and after instrumentation and after final cleaning. Statistical analyses were performed using the Mann-Whitney U test with the significance level set at P < 0.05.
ResultsBacterial culturing from the canal samples revealed strong reduction of bacteria from S1 to S2 in both groups after instrumentation and irrigation with water only. No growth was detected in any of the S3 samples after cleaning in either group. A highly significant reduction in bacterial DNA was recorded by qPCR for both groups (P < 0.001). GW System showed more constant and a significantly higher reduction of total microbial DNA (P = 0.007), Enterococcus faecalis DNA (P = 0.011) and Streptococcus spp. DNA (P = 0.029) than the Ultrasonic System. The amount of residual microbial DNA calculated as an average of residual DNA in each individual canal in PF group was 1.99% and in GW group 0.09%.
ConclusionsWhile both systems demonstrated a highly effective reduction of intracanal bacterial DNA, the final total amount and variation in the number of residual bacterial DNA was significantly smaller in the GW group.
Clinical relevanceElimination of microbes from the infected root canal system is regarded as the key for long-term clinical success. While both GentleWave and Ultrasonic Systems used with NaOCl and EDTA demonstrated a highly effective reduction of intracanal bacterial DNA; GW produced higher reduction and better predictability.
相似文献This study aimed to randomly compare in vivo coronal discoloration at 6 and 12 months after full pulpotomy in mature permanent molars using MTA, Biodentine, and TotalFill and to investigate the effect of variables such as remaining buccal wall thickness and time to achieve hemostasis.
Materials and methodsOne hundred eight teeth that met the inclusion criteria received full pulpotomy and were randomly divided into 3 groups via a block randomization technique according to the calcium silicate cement (CSC): ProRoot WMTA, TotalFill, or Biodentine. Assessment of tooth color was carried out using a spectrophotometric device (VITA Easyshade Compact) after composite placement (T0), at 6- and 12-month follow-up. Buccal wall thickness and time to hemostasis were recorded. The primary outcome measure (color change ΔE) was calculated, and the results were analyzed by three-way ANOVA and crosstabulations in relation to material type and effect of variables.
ResultsFour cases were excluded after pulpotomy failure; 81 teeth were evaluated at 6 months and 95 teeth at 12 months. All CSCs caused tooth discoloration (defined as ΔE > 3.7); MTA significantly caused the highest color change at 6- and 12-month follow-up (76% (19/25) and 87.5% (28/32), respectively) compared to Biodentine (41% (9/22), 48% (13/27)) and TotalFill (44% (15/34), 53% (19/53)) (p = 0.022, p = 0.002), while no significant difference was found between the Biodentine and TotalFill groups (p = 0.813, p = 0.8). Buccal wall thickness (above or below 2.7 mm) had a significant effect on the degree of discoloration (p = 0.004).
ConclusionsThe 3 CSCs caused tooth discoloration based on the threshold of ΔE > 3; the remaining buccal wall thickness was a significant factor. The use of Biodentine and TotalFill instead of MTA is encouraged to minimize discoloration.
Clinical relevanceWhile experimental studies report coronal discoloration after CSCs use, clinical data is lacking. This study assessed discoloration using a spectrophotometric device. The use of materials with lower discoloration potential in pulpotomy is encouraged.
Trial registrationThe study was registered with clinical trial registration number: NCT04346849 on 14.4.2020.
相似文献The objective of this work was to investigate in vivo the effects of calcium hydroxide-based intracanal medication (ICM) on the levels of bacteria, pro-inflammatory cytokines (PICs), and matrix metalloproteinases (MMPs) in root canals and periradicular tissues of teeth with failure of the root canal treatment and apical periodontitis.
Materials and methodsTwenty infected root canals of single-rooted teeth were randomly assigned into two groups according to the irrigant used for chemomechanical preparation (CMP) (n = 10 per group): G1 – 2% chlorhexidine (CHX) gel and G2 – 6% sodium hypochlorite (NaOCl). Root canal contents were taken by using paper points before CMP (S1) and after 30 days of calcium hydroxide-based ICM (S2). Microbial reduction was calculated by means of colony-forming unit count (CFU/mL), with PICs and MMPs (pg/mL) being measured by using enzyme-linked immunosorbent assay (ELISA).
ResultsCulturable bacteria (101.2 ± 79.2), PICs (IL-1β 1.2 ± 0.4 and TNF-α 8.8 ± 4.7), MMP-2 (803.7 ± 96.4), MMP-3 (453.9 ± 229.3), MMP-8 (245.9 ± 122.4), MMP-9 (129.4 ± 29.6), and MMP-13 (70.8 ± 12.8) were present in all S1 samples. After 30 days of ICM (S2), a 99.5% microbial reduction was observed, together with a significant reduction of PICs in all groups. Overall, it was observed a decrease in the levels of MMPs (S2), except MMP-13, which was found in increased levels after ICM (P < .05), independently of the groups.
ConclusionsCalcium hydroxide-based intracanal medications have had a positive effect on the microbial reduction by decreasing the levels of PICs and MMPs. Both auxiliary chemical substances (i.e., 2% CHX and 6% NaOCl) presented similar effects when calcium hydroxide was used as intracanal medication.
Clinical relevanceTeeth with failure of the root canal treatment and apical periodontitis, and consequently with high levels of bacteria, PIC, and MMP, may present a better prognosis after a 30 days of a calcium hydroxide-based ICM.
相似文献Objectives
The objectives of this study were to compare the fracture resistance of simulated human immature teeth that have undergone mineral trioxide aggregate (MTA) apexification and have been root-filled with fiber post, composite resin, MTA, or gutta-percha.Methods
Fifty-six human permanent maxillary incisors were selected. Ten teeth received no treatment (intact teeth group). The root canals of 46 teeth were prepared to an internal diameter of 1.75 mm. Six teeth were used as simulated immature teeth group. The remaining teeth received MTA apexification and were divided into 4 groups: MTA, fiber post, composite resin, and gutta-percha groups. The root canals of each group were filled with each test material. All teeth were thermocycled and received cyclic loading before compression testing by an Instron universal testing machine. The load to fracture was recorded. Data were subjected to statistical analysis by using one-way analysis of variance and Tukey multiple comparison test.Results
All teeth fractured at the cervical area of the root. The mean load to fracture of the intact tooth, MTA, fiber post, composite resin, gutta-percha, and the simulated immature tooth groups was 1988 N, 1921 N, 1691 N, 1623 N, 1476 N, and 962 N, respectively. Statistically, load to fracture of the simulated immature tooth group was significantly lower than in the intact tooth, MTA, fiber post, and composite resin groups but was not significantly different from the gutta-percha group.Conclusions
Within the limit of this study, after MTA apexification, intraradicular reinforcement with MTA, fiber post, or composite resin increased the fracture resistance of simulated immature teeth. 相似文献To evaluate the potential of conventional glass ionomer cement (GIC), Biodentine™, MTA, and Portland cement to induce mineral density changes in carious dentin compared to zinc oxide eugenol control cement (ZOE).
Materials and methodsFifty blocks of bovine root dentin were prepared and a biofilm model using ATCC strains of S.mutans, S.sobrinus, and L.casei was used to promote artificial dentin lesions. After demineralization, the blocks were randomly divided into the five cement groups. Half of the surface of each specimen received the tested material and the other half was covered with wax (control). Samples were stored in phosphate buffered saline solution for 30 days and after that were scanned in a micro-CT with standardized parameters. Dentin mineral density changes were calculated using differences in plot profiles of the exposed and control carious dentin. Friedman’s test, followed by Wilcoxon signed-rank test was used with 5% significance.
ResultsMean ΔZ values for the cements were 48.63 ± 19.09 for the control (ZOE), 63.31 ± 32.59 for Biodentine™, 114.63 ± 72.92 for GIC, 109.56 ± 66.28 for MTA, and 106.88 ± 66.02 for Portland cement. All cements showed a statistically significant increase in ΔZ values compared to the control, but Biodentine™ values were statistically significantly lower compared to GIC and the other calcium silicate cements.
ConclusionsTested materials present potential to induce mineral density changes in carious bovine dentin. MTA, Portland, and GIC showed higher bioactivity potential than Biodentine™.
Clinical relevanceBased on minimally invasive concept, materials with remineralization potential can be used to preserve diseased but still repairable dental tissue.
相似文献To obtain radicular measurements of two separate mesiobuccal (MB) root canals in maxillary first molars using micro-computed tomography (μCT) with customized software.
Materials and methodsHuman maxillary first molar MB roots (N = 36) with two separate canals (MB1, MB2) and apical foramina were scanned by μCT and analyzed with Kappa2 software to reconstruct three-dimensional (3D) surface models of roots and canals. These models were sectioned at 0.1 mm intervals perpendicular to the central axis of each canal. Canal widths, 3D curvatures, and surrounding dentine thicknesses were measured concurrently on each section. Dentine thicknesses were analyzed statistically for differences between each direction and the different levels of both canals.
ResultsDentine walls around MB1 were thicker than MB2 (p < 0.05). Thinnest dentine was most often located at disto-inside direction in both canals. Canal widths were significantly smaller in MB2 than MB1 (p < 0.01). Apical constrictions were smaller (p < 0.05) and further (p < 0.05) from the apex in MB2 than MB1. Canal curvatures were greatest in the apical third of both canals (p < 0.001), and they were greater in MB2 than MB1 (p < 0.05).
ConclusionsMB2 canals had shorter lengths, smaller widths, and more severe curvatures and were surrounded by thinner dentine walls. In MB2, apical constrictions were between 1 and 2 mm from the apex, compared to about 1 mm for MB1.
Clinical relevanceThese detailed measurements and in-depth 3D analyses of maxillary first molar MB roots with two separate canals and apical foramina provide morphologic references for root canal therapy.
相似文献The aim of the present study was to determine the effect of taper (.08, .06, and .04) of separated K3XF instruments on duration taken for the secondary fracture formation during ultrasonic activation.
Materials and methodsTen 25/.08 K3XF (SybronEndo, Orange, CA, USA), ten 25/.06 K3XF, and ten 25/.04 K3XF instruments were used for the study. The apical 5 mm of the instruments was cut to simulate the fragments in root canals. Fragments of the instruments were sandwiched between two straight dentin blocks. An ultrasonic tip was used to cause a secondary fracture of the fragment. The time needed for the secondary fracture was recorded for each instrument. The data were statistically analyzed using the Kruskal-Wallis H test (alpha = 0.05).
ResultsSecondary fractures occurred in all instruments. In the .08 taper group, secondary fractures took longer than in the case of the .06 and the .04 taper groups (P < 0.05). There were no significant differences between the .06 and the .04 taper groups in terms of the time required for the occurrence of a secondary fracture (P > 0.05).
ConclusionsIn the .08 taper group, secondary fracture took longer time than in the case of the .06 and the .04 taper groups due to its larger cross-sectional area involved.
Clinical relevanceTypically, when removing separated instruments, a much lower power setting is chosen. The purpose of this in vitro study was to determine which tapered files were more resilient to secondary fracture, thus allowing a higher power setting to be chosen. Thus, the results of the present study cannot be used in clinical practice. If the clinician knows the taper of the broken file, the clinician should be very careful with regard to secondary fractures when using ultrasonics to remove the separated smaller tapered instruments.
相似文献To assess the viability of multispecies microcosm biofilm after contact with NeoMTA Plus, Biodentine, and MTA Angelus.
Materials and methodsFifty-four human dentin blocks (4 × 5 × 4 mm) were allocated to Hawley retainers, worn by six volunteers for 72 h. The blocks were then individually incubated in BHI broth for 21 days at 37 °C. At the end of experimental time for biofilm growth, the samples were randomly divided into four groups (n = 12): NeoMTA Plus, Biodentine, MTA Angelus, and negative control. The materials were placed in contact with the blocks. All samples were placed in cell-culture plate wells and incubated in BHI broth for 7 days at 37 °C. One sample from each volunteer (n = 6) was analyzed by SEM to describe the biofilm morphology. CLSM was performed to determine the percentage of viable biofilm biovolume. The data were statistically analyzed by one-way ANOVA and Tukey’s multiple comparison test (α = 5%).
ResultsSEM showed biofilm formed by spherical and rod-shaped bacteria surrounded by an extracellular matrix. No material was able to kill all biofilm cells, and all groups had more than 50% of viable bacteria. NeoMTA Plus was significantly different from the negative control group (P < .05).
ConclusionsAll tested materials were not effective against multispecies microcosm biofilm.
Clinical relevanceNeoMTA Plus, Biodentine, and MTA Angelus were not effective against multispecies microcosm biofilm. It is essential to understand that these bioceramic cements are indicated for infected clinical situations. Thus, complementary disinfection procedures should be conducted prior to filling with these materials.
相似文献This study aims at identifying the microbiota in traumatized immature permanent teeth with periapical lesions using Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS).
MethodsThe study included 16 immature maxillary central incisors with periapical lesions in 13 patients. Field decontamination and negative control samples were performed before and after access cavity preparation. Root canal samples were taken using sterile stainless-steel hand files following field decontamination. In-office inoculation and pure sub-cultures were performed. Bacterial isolates were prepared for MALDI-TOF MS (Bruker, Billerica, MA USA) analysis using the formic acid extraction method. A comparison of the prevalence of isolated microorganisms was done using a one-sample chi-square test. Comparisons between identified microbial species with the, cone beam computed tomography periapical index (CBCT PAI) scores and lesion volume were also conducted. The Chi-square test was applied to investigate the association between the categorical variables .
ResultsOut of the forty isolates recovered from the 16 traumatized teeth included in the present study with the mean patients’ age of 10.93 ± 1.77, 37 isolates were reliably identified by MALDI-TOF MS. Twelve teeth (62.5%) were polymicrobial. The recovered bacteria belonged to five phyla, 15 genera and 25 species. Firmicutes were the predominant phylum (P < 0.001) over Bacteroidetes, Proteobacteria, Actinobacteria and Fusobacteria. Gram positive bacteria were significantly more prevalent than Gram negative (p = 0.03). Facultative anaerobes were the most prevalent (P < 0.001) compared to the obligate anaerobes and the obligate aerobes. The latter were the least prevalent. Statistically, significant differences existed in the comparison between CBCT PAI scores according to bacterial gram staining.
ConclusionTraumatized immature permanent teeth with periapical lesions showed a significant predominance of Gram-positive facultative anaerobes. MALDI-TOF MS provided accurate identification of numerous viable endodontic microbes.
相似文献This study aimed to compare WaveOne Gold with ProTaper and RaCe systems regarding remaining filling material, apical transportation (AT), and working time (WT) after (i) filling removal and (ii) shaping of curved canals.
MethodsThirty mesiobuccal canals of maxillary molars were prepared and filled. After 30 days, they were randomly assigned into three groups (n = 10), according to the instruments used for filling removal and shaping, respectively: WOG—WaveOne Gold Primary and Medium; PTG—ProTaper Retreatment and ProTaper Next; RCG—D-RaCe and RaCe. Micro-CT analysis assessed the residual filling material and AT. WT was recorded. Data were statistically analyzed (α = .05).
ResultsThere was no significant difference between groups in the amount of filling material at any evaluated moment (P > .05). All groups presented low AT values. The WT was similar in all groups in filling removal (P > .05), and in shaping step WOG was faster than PTG and RCG (P < .05).
ConclusionsNeither system could completely remove the filling material. The instruments evaluated were safe and the reciprocating system was faster than the rotary systems in shaping the canals.
Clinical relevanceThis study provided consistent information on filling material removal capacity of WaveOne Gold. Considering that all tested systems were safe, WaveOne Gold may be an alternative with cost-effectiveness and shorter learning curve for endodontic retreatment.
相似文献This study aimed to compare four final irrigation protocols (passive ultrasonic irrigation [PUI], EndoVac, Self-Adjusting File [SAF] and EasyClean) on the removal of accumulated hard-tissue debris (AHTD) from mesial canals of mandibular molars through microcomputed tomographic (micro-CT) analysis.
Materials and methodsForty mesial roots of mandibular molars presenting isthmuses type I or III were scanned in a micro-CT device and instrumented up to Reciproc R40 instrument. After the completion of canal preparations, root canals of each group were submitted to a final rinse using 20 mL of solution (16 mL of 5.25% NaOCl and 4 mL of 17% EDTA) in a total time of 5 min according to one of the four final irrigation protocols (n = 10): PUI, EndoVac, SAF and EasyClean operated at reciprocating motion. The sample was scanned again after canal preparation and after the use of the final irrigation protocols, and the registered data sets were examined to evaluate the percentage of AHTD. Data were statistically compared using the Tukey test with a significance level set at 5%.
ResultsAll groups presented a decrease on the accumulation of hard-tissue debris after the use of the final irrigation protocols (P < 0.05). No significant differences in the removal of AHTD were observed among the final irrigation protocols (P > 0.05).
ConclusionsAll final irrigation protocols showed the same effectiveness in the removal of AHTD. None of them was able to render mesial canals of mandibular molars completely free from packed debris.
Clinical relevanceThis study highlighted that all final irrigation protocols (PUI, EndoVac, SAF, and EasyClean) promoted a similar removal of AHTD. However, none of the final irrigation protocols was able to render mesial canals of mandibular molars completely free from packed debris.
相似文献Introduction
The aim of this study was to compare the fracture resistance of simulated immature teeth after using different thicknesses of mineral trioxide aggregate (MTA) apical plugs.Methods
Fifty-two human maxillary anterior teeth were used. Five teeth were the positive control group; they were prepared using Peeso reamers to simulate immature teeth without any access cavity preparation. Access cavities of the 47 teeth were prepared, and the canals were instrumented with Peeso reamers. Five teeth served as the negative control; they were filled with calcium hydroxide. Forty-two teeth were divided into 3 groups; in groups 1, 2, and 3, MTA was placed into canals as a 3-mm and a 6-mm apical plug and a thorough canal length, respectively. The rest of the canals in groups 1 and 2 were filled with gutta-percha and AH Plus sealer (Dentsply DeTrey, Konstanz, Germany). After the storage period, the roots were covered with a polyether impression material and were embedded into self-curing resin blocks. Each specimen was then subjected to fracture testing using a universal testing machine. Data were analyzed using 1-way analysis of variance with the Tukey post hoc test for multiple comparisons.Results
The negative group showed the lowest fracture resistance compared with the other groups. The 3-mm apical plug group showed the highest fracture resistance (P < .05). No significant differences were found between the 3-mm and 6-mm apical plug groups (P > .05).Conclusions
MTA should be used as an apical plug instead of root canal filling material to increase the fracture resistance of immature teeth. 相似文献To compare the remaining root canal filling material, dentin removal, apical transportation, and apical extrusion of debris after the retreatment of canals filled with bioceramic or resin-based sealers using the Reciproc or Reciproc Blue instruments.
Materials and methodsSixty mandibular molars with severely curved mesial roots were selected. The samples were initially instrumented with Reciproc (R25) and then divided into four experimental groups according to the endodontic sealer and retreatment instrument (n = 15): BC Sealer/Reciproc (BCRC), BC Sealer/Reciproc Blue (BCRB), AH Plus/Reciproc (AHRC), and AH Plus/Reciproc Blue (AHRB). The procedure time was measured, and an Eppendorf tube was used in each root canal to store the debris extrusion. The samples were scanned by micro-CT before and after retreatment. The apical transportation, volume of dentin, and filling material were evaluated.
ResultsThere were no significant differences in the reduction of the volume of obturator material or dentin removal between groups (p > .05). There were also no differences in the amount of extruded material or apical transportation (p > .05). The retreatment time for the AHRC group was significantly lower than that for the other groups (p = .004).
ConclusionsAll tested instruments obtained similar efficacy in filling material removal procedures, although no system completely removed the filling material. Retreatment of canals filled with bioceramic BC Sealer may be more time consuming.
Clinical relevanceThis study reported that Reciproc and Reciproc Blue can be indicated in retreatment of severely curved root canals filled either with bioceramic or resin-based sealers.
相似文献