Pulmonary vein analysis using three-dimensional computed tomography angiography for thoracic surgery

Objective  

Little information is available regarding the variations in pulmonary vein anatomy for the purpose of thoracic or video-assisted thoracoscopic surgery (VATS). To learn about the types and frequency of pulmonary vein variations for VATS, we reviewed a “tailor-made virtual lung” of patients that was constructed using three-dimensional multidetector computed tomography (3D-MDCT) angiography.     

Anomalous V2 of the left pulmonary vein detected using three-dimensional computed tomography in a patient with lung cancer: A case report

We report one of the rare anatomical variations of the pulmonary vein wherein the left V2 drained into the inferior pulmonary vein. A 63-year-old man was referred to our hospital because of an abnormal shadow in the left lower lung field that was noted on chest X-ray. Computed tomography (CT) revealed a tumor in the left lower lobe. A biopsied tumor specimen was diagnosed as an adenocarcinoma, and thus, left lower lobectomy was performed. Preoperative three-dimensional CT revealed that an anomalous V2 of the left lung drained from the superior segment into the inferior pulmonary vein. This variation type was confirmed during thoracoscopic left lower lobectomy. We were able to perform left lower lobectomy with the preservation of the anomalous V2. The postoperative course was uneventful, and the patient was discharged on postoperative day 12. It is important to identify anatomical variations of the pulmonary vein and reliably preserve and process the affected area to prevent postoperative complications.     

Segmentectomy guided by three-dimensional computed tomography angiography and bronchography

We describe the benefits of a three-dimensional multidetector computed tomography angiography and the bronchography-guided segmentectomy technique. Preoperative determination of the anatomical intersegmental plane is possible by visualizing the segmental branches of the pulmonary veins and segmental bronchi. This new technique may be useful in segmentectomy of the lung.     

Evaluation of the upper sacrum by three-dimensional computed tomography.

Axial and sagittal computed tomographic (CT) scans of 40 sacrum specimens were obtained. The measurements of the upper sacral canal and S1-2 and S2-3 anterior sacral foramina were performed on axial scans, and the evaluation of the upper sacral pedicle was based on sagittal scans. The results showed that there were statistically significant differences between male and female specimens in 3 of 29 measurements. In general, the measurements of male specimens were slightly larger than those of the female specimens, and the linear dimensions of the sacral canal, anterior foramina, and pedicle decreased from the S1 to S3. This study indicated that the critical area of the sacral pedicle for screw insertion lies in the junction between the pedicle and vertebral body. CT scans provide more accurate information about the essential sacral anatomy.     

Re-anastomosis of the anomalous segmental pulmonary vein during inferior bilobectomy

An anomalous pulmonary vein anatomy could represent a challenge for the thoracic surgeon. In these cases, the incidence of complications during lung surgery is increased, especially the need to perform a pneumonectomy due to a wrong section of the vascular elements. All attempts to reduce this risk must be undertaken, including techniques to restore normal venous drainage. We present a case of re-anastomosis of the posterior segmental vein of the right upper lobe draining into the lower pulmonary vein during a right lower bilobectomy for lung cancer.     

Anomalous pulmonary vein detected using three-dimensional computed tomography in a patient with lung cancer undergoing thoracoscopic lobectomy

Few clinicians are familiar with the anatomy of anomalous pulmonary veins, and studies reporting patients who required right lower lobectomy for lung cancer and who had anomalies of the middle and lower pulmonary veins are even rarer. This report describes the case of a lung cancer patient who had an anomalous lateral part of the middle lobe vein (V4) draining into the right inferior pulmonary vein, which was confirmed by three-dimensional 64-row multidetector computed axial tomography (3D-MDCT) angiography. She was then successfully treated with video-assisted thoracic surgery. The preoperative 3D imaging of the pulmonary vein and artery allowed us to comprehend fully the patient's vascular anatomy before the operation. Thus, we recommend preoperative 3D-MDCT angiography for patients with lung cancer undergoing thoracic surgery, especially video-assisted thoracic surgery.     

Use of three-dimensional computed tomographic angiography of pulmonary vessels for lung resections

BACKGROUND: Identification and appropriate treatment of the pulmonary artery (PA) is a key to successful anatomic resection of the lung. Preoperative identification of branching pattern of the PA seems to make pulmonary resection easier and safer especially when there is severe adhesion or incomplete fissure between the lobes. With the development of the multidetector row spiral computed tomography (MDCT), three-dimensional (3D) CT angiography can be obtained easily and can provide very useful information about various organs. We studied the usefulness of 3D-CT pulmonary angiography (3D-CTPA) in evaluating the PA branching pattern before anatomic pulmonary resection. METHODS: Fourteen patients with primary lung cancer undergoing anatomic pulmonary resections were the subjects of this study. The 3D-CTPA images were obtained using MDCT. The obtained images of the PA branching pattern were compared with intraoperative findings in each case at the time of thoracotomy. RESULTS: MDCT scanning required approximately 15 seconds per patient during a single respiratory pause and the 3D images were processed within 10 minutes after scannning. According to intraoperative findings, 98% (84 of 86) of PA branches were revealed to be successfully identified on preoperative 3D-CTPA. Two missed branches on 3D-CTPA were small vessels, which were less than 1.5 mm in actual diameter. Pulmonary vessels were clearly identified even when contrast medium was not administered intravenously. CONCLUSIONS: Obtaining 3D-CTPA using MDCT is noninvasive yet it provides precise preoperative information regarding pulmonary vessels. This technique is a far less invasive and an easier investigation than conventional pulmonary angiography. The 3D-CTPA navigation may have the potential to increase the safety of surgical procedure and to reduce surgical morbidity in anatomic lung resection.     

Laparoscopic nephron-sparing surgery: preoperative assessment with three-dimensional computed tomography

OBJECTIVE: For retroperitoneal laparoscopic nephron-sparing surgery using a microwave tissue coagulator, it is helpful to know the relationship between the tumour, collecting system and vessels to prevent urinary leakage and vascular damage. We assessed the efficacy of multiplanar reformation and three-dimensional (3D) CT with the renal collecting system filled with contrast medium. METHODS: Fifteen patients with small renal tumours of less than 3 cm in diameter underwent dynamic CT examination ten minutes after injection of contrast medium of 30 ml. Multiplanar reformation, volume-rendered and maximum intensity projection images were created for determining operative approaches and for planning the operation. RESULTS: In all cases, the distance between the tumour and collecting system was measured on the multiplanar reformation. Accordingly, five cases were indicated for retroperitoneal laparoscopic nephron-sparing surgery using a microwave tissue coagulator. The remaining ten cases, due to the short distance (less than 10mm), were not considered good candidates for this procedure. The relationship between the tumour, collecting system and vessels was well shown on the volume-rendered and maximum intensity projection images. CONCLUSIONS: Multiplanar reformation and 3D-CT are able to give us an understanding of the surrounding structures. They are helpful in defining the indications for retroperitoneal laparoscopic nephron-sparing surgery using a microwave tissue coagulator and preoperative planning of nephron-sparing surgery.     

Scimitar syndrome with anomalous connection of left superior pulmonary vein to left innominate vein

Scimitar syndrome is a rare variant of partial anomalous pulmonary venous connection. The combination of scimitar syndrome with anomalous connection of the left superior pulmonary vein to the left innominate vein is extremely rare, and is yet to be documented in literature. We report the successful single-stage correction of such a rare type of anomalous pulmonary venous connection.     

Accurate preoperative estimation of liver-graft volumetry using three-dimensional computed tomography

BACKGROUND: The aim of this study was to clarify the value of three-dimensional computed-tomography (3D-CT) volumetry for size matching in living-donor liver transplantation (LDLT). METHODS: 3D-CT volumetry was applied to 25 donors who underwent hepatectomy for a living relative needing an orthotopic liver transplantation. Fifteen patients underwent extended left lobectomy, one patient an extended left lateral lobectomy, and nine patients right lobectomy. 3D-CT imaging was performed with the workstation ZIO M900 (Zio Software Inc., Tokyo, Japan). The estimated volume of the grafts in two-dimensional (2D) and 3D images were compared, and an error ratio was calculated. RESULTS: 3D-CT imaging revealed the anatomy of the hepatic vein bifurcation and the shape of the graft. The error ratio was 12.8+/-2.3% in 3D, compared with 19.4+/-2.5% in 2D. As such, 3D-CT volumetry appears to be more exact than conventional 2D-CT volumetry, but volumetry by 3D-CT still produces an error ratio of approximately 13%. The weight transition of the rats' livers under preservation in University of Wisconsin (UW) solution indicated that the graft volume seems to decrease during perfusion with UW solution. Mismatch of the cutting line and volume reduction by dehydration (approximately 5% reduction 1 hour after perfusion) seems to cause the error in 3D-CT volumetry. CONCLUSIONS: Three-dimensional CT volumetry is useful for size matching in cases of living-related orthotopic liver transplantation.