Development of novel ibuprofen-loaded solid dispersion with enhanced bioavailability using cycloamylose

To develop a novel ibuprofen-loaded solid dispersion with enhanced bioavailability using cycloamylose, it was prepared using spray-drying techniques with cycloamylose at a weight ratio of 1:1. The effect of cycloamylose on aqueous solubility of ibuprofen was investigated. The physicochemical properties of solid dispersions were investigated using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction. The dissolution and bioavailability in rats were evaluated compared with ibuprofen powder. This ibuprofen-loaded solid dispersion improved about 14-fold drug solubility. Ibuprofen was present in an unchanged crystalline state, and cycloamylose played the simple role of a solubilizing agent in this solid dispersion. Moreover, the dispersion gave 2-fold higher AUC (area under the drug concentration-time curve) value compared with a ibuprofen powder, indicating that it improved the oral bioavailability of ibuprofen in rats. Thus, the solid dispersion may be useful to deliver ibuprofen with enhanced bioavailability without crystalline change.     

Enhanced dissolution of ibuprofen using solid dispersion with poloxamer 407

To improve its dissolution, ibuprofen solid dispersions (SDs) were prepared, characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR), and evaluated for solubility, and in-vitro ibuprofen release. Loss of individual surface properties during melting and re-solidification as revealed by SEM micrographs indicated the formation of effective SDs. Absence or shifting towards the lower melting temperature of the drug peak in SDs and physical mixtures in DSC study indicated the possibilities of drug-polymer interactions. FTIR spectra showed the presence of drug crystalline in SDs. The effect of improved dissolution on the oral absorption of ibuprofen in rats was also studied. Quicker release of ibuprofen from SDs in rat intestine resulted in a significant increase in AUC and C_max, and a significant decrease in T_max over pure ibuprofen. Comparison of the enhanced solubility, dissolution, AUC, and C_max of ibuprofen from different poloxamers suggested that the preparation of ibuprofen SDs using P 407 as a meltable hydrophilic polymer carrier could be a promising approach to improve its solubility, dissolution and absorption rate.     

Preparation of ibuprofen-loaded liquid suppository using eutectic mixture system with menthol

To prepare an ibuprofen-loaded liquid suppository using eutectic mixture with menthol, the effects of menthol and poloxamer 188 (P 188) on the aqueous solubility of ibuprofen were investigated. The physicochemical properties such as gelation temperature, gel strength and bioadhesive force of various formulations composed of ibuprofen, menthol and P 188 were investigated. Then, the pharmacokinetic study of ibuprofen delivered by the liquid suppositories composed of P 188 and menthol were then performed. In the absence of P 188, the solubility of ibuprofen increased until the ratio of menthol to ibuprofen increased from 0:10 to 4:6 followed by an abrupt decrease in solubility above the ratio of 4:6, indicating that four parts of ibuprofen formed eutectic mixture with six parts of menthol. In the presence of P 188, the solutions with the same ratio showed abrupt increase in the solubility of ibuprofen. Furthermore, the solution with ratio of 4:6 showed more than 2.5- and 6-fold increase in the solubility of ibuprofen compared with that without additives and that without menthol, respectively. The poloxamer gel with menthol/ibuprofen ratio of 1:9 and higher than 15% poloxamer 188 showed the maximum solubility of ibuprofen, 1.2mg/ml. Ibuprofen increased the gelation temperature and weakened the gel strength and bioadhesive force of liquid suppositories. However, menthol did the opposite due to forming the eutectic mixture with ibuprofen. The ibuprofen-loaded liquid suppository [P 188/menthol/ibuprofen (15/0.25/2.5%)] with the maximum ibuprofen solubility of 1.2mg/ml was administered easily to the anus and to remain at the administered site without leakage after the dose. Furthermore, it gave significantly higher initial plasma concentrations, Cmax and AUC of ibuprofen than did solid suppository, indicating that the drug from poloxamer gel could be more absorbed than that from solid one in rats. Thus, the liquid suppository system with P 188 and menthol, a more convenient and effective rectal dosage form for ibuprofen will be expected to enhance the rectal bioavailability of ibuprofen.     

RP—HPLC法测定布洛芬-聚乙二醇6000固体分散体中布洛芬的含量

目的 建立反相高效液相色谱法测定布洛芬-聚乙二醇6000固体分散体中布洛芬的含量.方法 色谱柱为Shimadzu C18柱,流动相为0.02 mol·L^-1醋酸钠（冰醋酸调节pH至3.0±0.1）-乙腈（40：60）,流速1.0ml·min^-1,检测波长为264nm,进样量为20μl.结果 布洛芬质量浓度在0.051～1.02 mg·ml^-1范围内与相应峰面积呈良好线性关系（r=0.999 9,n=6）,平均加样回收率为98.40%,RSD为0.92%（n=9）.结论 所用方法准确、简便、快速,适用于布洛芬-聚乙二醇6000固体分散体中布洛芬的含量测定.     

Development of novel itraconazole-loaded solid dispersion without crystalline change with improved bioavailability

To develop a novel itraconazole-loaded solid dispersion without crystalline change with improved bioavailability, various itraconazole-loaded solid dispersions were prepared with water, polyvinylpyrroline, poloxamer and citric acid. The effect of carriers on aqueous solubility of itraconazole was investigated. Their physicochemical properties were investigated using SEM, DSC, and powder X-ray diffraction. The dissolution, bioavailability in rats and stability of solid dispersions were evaluated. Unlike conventional solid dispersion system, the itraconazole-loaded solid dispersion with relatively rough surface did not change crystalline form of drug. Our DSC and powder X-ray diffraction results suggested that this solid dispersion was formed by attaching hydrophilic carriers to the surface of drug without crystal change, resulting in conversion of the hydrophobic drug to hydrophilic form. The itraconazole-loaded solid dispersion at the weight ratio of itraconazole/polyvinylpyrroline/poloxamer of 10/2/0.5 gave maximum drug solubility of about 20 μg/mL. It did not change the crystalline form of drug for at least 6 months, indicating that it was physically stable. It gave higher AUC, C_max and T_max compared to itraconazole powder and similar values to the commercial product, suggesting that it was bioequivalent to commercial product in rats. Thus, it would be useful to deliver a poorly water-soluble itraconazole without crystalline change with improved bioavailability.     

三元固体分散体提高利多卡因溶解度研究（英文）

使用熔融法制备利多卡因-泊洛沙姆固体分散体以提高利多卡因的溶解度及溶出度。以利多卡因(LIC)作为模型药物,分别使用泊洛沙姆188 (P188)和泊洛沙姆407 (P407)作为单一及混合载体,制备三元及二元固体分散体并进行比较。使用DSC、XRD、SEM及FTIR进行一系列表征,通过溶出度试验研究固体分散体的溶出特性,药物以晶体形式存在于载体中,药物溶出度及溶解度结果较原料药均有明显提高。相溶解度研究显示出药物与载体呈AL型曲线,有分子相互作用的存在。此外,还考察了固体分散体在不同相对湿度下的长期稳定性,稳定性测试结果表明三元及二元利多卡因-泊洛沙姆固体分散体在不同湿度下,6个月内保持稳定。研究结果表明,混合泊洛沙姆三元固体分散体可以显著提高难溶性利多卡因的溶出度和溶解度。     

固体分散体在提高难溶性药物口服生物利用度中的应用

固体分散体在提高难溶性药物溶出度和口服生物利用度中的应用引起了药学工作者的关注,本文综述了固体分散体常用载体、常用的溶剂、提高难溶性药物溶出速率的机制和制备方法以及其他替代的方法,以期将难溶性药物制备为固体分散体提供参考。     

Cefuroxime axetil solid dispersion with polyglycolized glycerides for improved stability and bioavailability

Objectives Cefuroxime axetil (CA), a poorly soluble, broad spectrum cephalosporin ester prodrug, is hydrolysed by intestinal esterase prior to absorption, leading to poor and variable bioavailability. The objective was therefore to formulate a stable amorphous solid dispersion of the drug with enhanced solubility and stability against enzymatic degradation. Methods Spray drying was used to obtain a solid dispersion of CA with Gelucire 50/13 and Aerosil 200 (SDCAGA), and a solid dispersion of CA with polyvinyl pyrrolidone (SDCAP); amorphous CA (ACA) was obtained by spray drying CA alone. The formulations were characterized by differential scanning calorimetry, X‐ray powder diffraction, scanning electron microscopy and Fourier transform infrared spectroscopy studies, and compared for solubility, dissolution and bioavailability in rats. Key findings SDCAP and SDCAGA showed improved solubility and dissolution profiles owing to amorphization and formation of solid dispersions with hydrophilic carriers. The improved stability of amorphous CA in solid dispersions compared to ACA alone was attributed to hydrogen bonding interactions involving the amide of CA with the carbonyl of polyvinyl pyrrolidone in SDCAP, whereas in SDCAGA the interactions were at multiple sites involving the amide and carbonyl of CA with the carbonyl and hydroxyl of Gelucire 50/13. However, SDCAGA showed superior bioavailability compared to SDCAP, ACA and CA. Conclusions Improvement in physical stability of solid dispersions was attributed to hydrogen bonding, while improvement in bioavailability of SDCAGA compared to SDCAP, in spite of comparable solubility and dissolution profile, may be attributed to Gelucire, which utilizes intestinal esterase for lipolysis, protecting the prodrug from enzymatic degradation to its non‐absorbable base form.     

The effects of cryoprotectants on the freeze-drying of ibuprofen-loaded solid lipid microparticles (SLM)

The effects of cryoprotectants on the diameter and the entrapment efficiency of ibuprofen-loaded solid lipid microparticles (SLM) during the freeze-drying process were investigated extensively. The SLM were prepared by the emulsion-congealing technique in which a glycerol behenate was used as the lipid matrix for the SLM and a soybean lecithin/bile salt used as the stabilizer. Also, trehalose, glucose, mannitol, and sucrose were chosen as the cryoprotectants. Trehalose and glucose proved to be the most effective in preventing particles aggregation and in inhibiting leakage from drug-loaded particles during the SLM freeze-drying process. The most suitable concentrations were proved to be 15% and 5% (wt), respectively.     

Physicochemical characterization of tacrolimus-loaded solid dispersion with sodium carboxylmethyl cellulose and sodium lauryl sulfate

To develop a novel tacrolimus-loaded solid dispersion with improved solubility, various solid dispersions were prepared with various ratios of water, sodium lauryl sulfate, citric acid and carboxylmethylcellulose-Na using spray drying technique. The physicochemical properties of solid dispersions were investigated using scanning electron microscopy, differential scanning calorimetery and powder X-ray diffraction. Furthermore, their solubility and dissolution were evaluated compared to drug powder. The solid dispersion at the tacrolimus/CMC-Na/sodium lauryl sulfate/citric acid ratio of 3/24/3/0.2 significantly improved the drug solubility and dissolution compared to powder. The scanning electron microscopy result suggested that carriers might be attached to the surface of drug in this solid dispersion. Unlike traditional solid dispersion systems, the crystal form of drug in this solid dispersion could not be converted to amorphous form, which was confirmed by the analysis of DSC and powder X-ray diffraction. Thus, the solid dispersion system with water, sodium lauryl sulfate, citric acid and CMC-Na should be a potential candidate for delivering a poorly water-soluble tacrolimus with enhanced solubility and no convertible crystalline.     

Improving the dissolution rate of poorly water soluble drug by solid dispersion and solid solution: pros and cons

The solid dispersions with poloxamer 188 (P188) and solid solutions with polyvinylpyrrolidone K30 (PVPK30) were evaluated and compared in an effort to improve aqueous solubility and bioavailability of a model hydrophobic drug. All preparations were characterized by differential scanning calorimetry, powder X-ray diffraction, intrinsic dissolution rates, and contact angle measurements. Accelerated stability studies also were conducted to determine the effects of aging on the stability of various formulations. The selected solid dispersion and solid solution formulations were further evaluated in beagle dogs for in vivo testing. Solid dispersions were characterized to show that the drug retains its crystallinity and forms a two-phase system. Solid solutions were characterized to be an amorphous monophasic system with transition of crystalline drug to amorphous state. The evaluation of the intrinsic dissolution rates of various preparations indicated that the solid solutions have higher initial dissolution rates compared with solid dispersions. However, after storage at accelerated conditions, the dissolution rates of solid solutions were lower due to partial reversion to crystalline form. The drug in solid dispersion showed better bioavailability in comparison to solid solution. Therefore, considering physical stability and in vivo study results, the solid dispersion was the most suitable choice to improve dissolution rates and hence the bioavailability of the poorly water soluble drug.     

Preparation of esomeprazole zinc solid dispersion and study on its pharmacokinetics

Esomeprazole zinc (EZ) is a poorly water-soluble substance. In order to increase its dissolution rate and bioavailability, solid dispersions of esomeprazole zinc (SDEZ) in polyethylene glycol 4000 (PEG4000) with different EZ to PEG4000 ratios were prepared by solvent method. Our studies showed that dissolution rate of EZ were distinctively increased in the solid dispersion system compared to that in pure EZ or physical mixtures. The increase of dissolution rate was obviously related to the ratio of EZ to PEG4000. The solid dispersion system (EZ/PEG4000=1/8, w/w) gave the highest dissolution rate: about 14.7-fold higher than that of the pure EZ. EZ was proved to be in amorphous state in this solid dispersion by using differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) techniques. In vivo administration studies, SDEZ in enteric capsule (SDEZ-EC) has a lower Cmax and a longer Tmax than that of esomeprazole magnesium enteric-coated tablet (Nexium), and the differences of Cmax and Tmax between SDEZ-EC and Nexium are significant. This result suggests SDEZ-EC has a lower absorption rate than Nexium and corresponds with the in vitro dissolution.     

A novel solid dispersion system for natural product-loaded medicine: silymarin-loaded solid dispersion with enhanced oral bioavailability and hepatoprotective activity

Abstract

A surface-attached silymarin-loaded solid dispersion with improved dissolution profile and enhanced oral bioavailability was formulated using silymarin, polyvinylpyrrolidone (PVP) and Tween 80 in water. In this solid dispersion, hydrophilic PVP was adhered onto the surface of crystalline drug rendering silymarin hydrophilic without changing its crystallinity. The drug solubility from the optimised solid dispersion prepared with silymarin/PVP/Tween 80 at the weight ratio of 5/2.5/2.5 increased by almost 650-fold compared to drug powder. The drug was physically and chemically stable in the solid dispersion for at least 6 months. Moreover, the solid dispersion enhanced the oral bioavailability of the drug in rats by almost 3-fold compared to the commercial product. The silymarin-loaded solid dispersion also exhibited advanced hepatoprotective bioactivity against CCl₄-induced liver damage compared to silymarin or the commercial product. Thus, this silymarin-loaded solid dispersion would be useful for the enhancement of oral bioavailability and hepatoprotective activity of poorly water-soluble silymarin.     

紫杉醇-PVP固体分散体的制备、物相鉴定及细胞药效

用溶剂法制备紫杉醇-PVP固体分散体，对其溶解度及体外溶出特性进行考察并对物相进行鉴定。采用溶剂法制备紫杉醇-PVP固体分散体，对固体分散体中紫杉醇的溶解度和溶出率进行测定，研究固体分散体的溶出性质。同时，利用差热分析（Differential scanning calorimetry，DSC）、粉末X衍射（X-ray powder diffractometry,PXRD）、扫描电镜（Scanning electron microscopy，SEM）等方法对其进行物相鉴定。采用SRB法对紫杉醇-PVP固体分散体对SKOV-3细胞药效进行测定。紫杉醇-PVP固体分散体中紫杉醇的溶解度和溶出速率相对其原料药和物理混合物均有了明显的提高；热差分析及粉末X衍射结果表明固体分散体中紫杉醇呈非结晶形式；扫描电镜下固体分散体中无紫杉醇晶体。细胞药效结果表明紫杉醇-PVP固体分散体的细胞药效强于紫杉醇纯药。采用溶剂法制备的紫杉醇-PVP固体分散体可显著提高紫杉醇的溶解度和溶出速度。     

Mechanochemical preparation of triptolide-loaded self-micelle solid dispersion with enhanced oral bioavailability and improved anti-tumor activity

Triptolide (TP), a compound isolated from a Chinese medicinal herb, possesses potent anti-tumor, immunosuppressive, and anti-inflammatory properties, but was clinically limited due to its poor solubility, bioavailability, and toxicity. Considering the environment-friendly, low-cost mechanochemical techniques and potential dissolution enhancement ability of Na₂GA, an amorphous solid dispersion (Na₂GA&TP-BM) consisting of TP and Na₂GA were well-prepared to address these issues. The performance of Na₂GA&TP-BM was improved through ball milling, such as from crystalline state to an amorphous solid dispersion, suitable nano micelle size and surface potential, and increased solubility. This change had a significant improvement of pharmacokinetic behavior in mice and could be able to extend the blood circulation time of the antitumor drug. Moreover, in vitro and in vivo anti-tumor study showed that Na₂GA&TP-BM displayed more potent cytotoxicity to tumor cells. The work illustrated an environment-friendly and safe preparation of the TP formulation, which was promising to enhance the oral bioavailability and antitumor ability of TP, might be considered for efficient anticancer therapy.     

Chitin biomass-nifedipine amorphous solid dispersion for enhancement of hydrophobic drug dissolution in aqueous media

Solid dispersions of poorly-water soluble nifedipine using microparticles fabricated from chitin biomass were prepared to improve the drug dissolution in an aqueous medium. After the drug loading and solvent evaporation, the drug loading capacity of 1, 6, and 19 %w/w was obtained. In the microstructure, the drug was dispersed on the porous chitin carrier with minor agglomeration leading to reduced crystallization and improved dissolution, nearly 100%, as compared to the pure nifedipine powder and the physical mixture with chitin. There was an interaction between functional groups of the drug and polymer, consequently the release prolonged for the entire 6 h with the maximum drug solubility of about 300 μg/ml. An in vitro release study showed that nifedipine effectively released from chitin into a simulated gastric releasing medium (pH 1.2). In this case, the release mechanism was best fitted with a Zero-order model based on the Fick's Law in the first 2 h. This research indicated that employing microparticle obtained from chitin biomass in the solid dispersion system lowered the drug recrystallization, facilitated drug release, and provided the sustainability in pharmaceutical science.     

Evaluation of the bioavailability of hydrocortisone when prepared as solid dispersion

This study was conducted to formulate, characterize, and investigate the bioavailability of hydrocortisone (HCT) when prepared as solid dispersions. HCT was mixed in an organic solvent with polyethylene glycol 4000 (PEG 4000) and Kolliphor® P 407. Spray drying technique was employed to form a solid dispersion formulation at a specific ratio. Physical and chemical characterization of the formed particles were achieved using differential scanning calorimetry, scanning electron microscopy, Fourier transform infrared spectroscopy, and powder X-ray diffractometry. Furthermore, comparative in vitro and in vivo studies were conducted between the formulated particles against neat HCT. The formulated solid dispersion showed elongated particles with leaf-like structure. Formation of new chemical bonds in the formed particle was suggested due to the change in the vibrational wave numbers and the significant improvement in the bioavailability of the dispersed particles proved the importance of this technique.     

Preparation and evaluation of ibuprofen-loaded microemulsion for improvement of oral bioavailability

The purpose of the current study was to improve the solubility of ibuprofen, a poorly water-soluble drug, in a microemulsion system that is suitable for oral administration. Microemulsion was prepared using different sorts of oils, surfactants, and co-surfactants. Pseudo-ternary phase diagrams were used to evaluate the microemulsion domain. The formulations were characterized by solubility of the drug in the vehicle, droplet size, and drug release. The optimal formulation consists of 17% Labrafil M 1944CS, 28% Cremophor RH40/Transcutol P (3:1, w/w), and 55% water, with a maximum solubility of ibuprofen up to 60.3?mg/ml. The mean droplet size of microemulsion was 57?nm. The pharmacokinetic study of microemulsion was performed in rats and compared with granule formulation. The microemulsion has significantly increased the C_max and area under the curve (AUC) compared to that of the granule (p?<?0.05). The relative bioavailability of ibuprofen in microemulsions was 1.9-fold higher than that of the granule. These results indicated that this novel microemulsion is a useful formulation for enhancing the oral bioavailability of ibuprofen.     

Quercetin-phospholipids complex solid dispersion and quercetin solid dispersion: preparation and evaluation

Quercetin (QUE) has many beneficial biological activities and pharmacological actions in vitro. However, its oral bioavailability in vivo was very poor due to poor solubility, and severely restricted its clinical applications. In this study, we preparedquercetin solid dispersion (QUE-SD) and quercetin phospholipids complex solid dispersion (QUE-PC-SD) by a solvent evaporationmethod to improve the absorption of QUE in vivo. The results of XRD of QUE-SD and QUE-PC-SD showed that QUE was dispersed homogeneously in an amorphous or molecular state in QUE-SD and QUE-PC-SD, which could contribute to improve the solubility and dissolution of QUE. The solubility of QUE-SD and QUE-PC-SD was enhanced from (4.03±0.02) μg/mL to (26.91±0.06) μg/mL and (30.65±0.06) μg/mL, respectively. The solubility of QUE-PC-SD was higher than that of QUE-SD.In vitro dissolution study, it was showed that the maximum dissolution of QUE (9.57%) from the QUE-SD and QUE-PC-SD was enhanced to 93.81% and 94.16%, respectively. The results of pharmacokinetic experiment indicated that the QUE-SD and QUE-PC-SD exhibited considerable enhancement in the oral bioavailability. The relative bioavailability of QUE-SD and QUE-PC-SD compared with QUE were 149.49% and 198.32%, respectively. In addition, the relative bioavailability of QUE-PC-SD was also higher than that of QUE-SD. Therefore, in regard to drugs with poor solubility and low permeation, an active constituent-PC-SD system could result to a better absorption and higher bioavailability.