Collaborative evaluation of optimal antifungal susceptibility testing conditions for dermatophytes

A multicenter study was conducted to define the most suitable testing conditions for antifungal susceptibility of dermatophytes. Broth microdilution MICs of clotrimazole, itraconazole, and terbinafine were determined in three centers against 60 strains of dermatophytes. The effects of inoculum density (ca. 10(3) and 10(4) CFU/ml), incubation time (3, 7, and 14 days), endpoint criteria for MIC determination (complete [MIC-0] and prominent [MIC-2] growth inhibition), and incubation temperature (28 and 37 degrees C) on intra- and interlaboratory agreement were analyzed. The optimal testing conditions identified were an inoculum of 10(4) CFU/ml, a temperature of incubation of 28 degrees C, an incubation period of 7 days, and MIC-0.     

Influence of glucose supplementation and inoculum size on growth kinetics and antifungal susceptibility testing of Candida spp

The influences of inoculum size and glucose supplementation on the growth kinetics of 60 Candida spp. clinical isolates (Candida albicans, Candida tropicalis, Candida parapsilosis, Candida glabrata, Candida krusei, and Candida lusitaniae [10 isolates each]) are assessed. The combined influence of growth and reading method (visual or spectrophotometric) on the determination of the MICs of amphotericin B, flucytosine, fluconazole, itraconazole, ketoconazole, and voriconazole is also analyzed, and the MICs are compared with those determined by the National Committee for Clinical Laboratory Standards standard microdilution method (NCCLS document M27-A). Glucose supplementation and inoculum size had a significant influence on the growth cycles of these yeasts, and a statistically significant denser growth (optical density at 540 nm) was seen for both incubation periods, 24 and 48 h (P < 0.01). A longer exponential phase and shorter lag phase were also observed. The A540 values at 24 h of incubation with medium containing glucose and an inoculum of 10(5) CFU/ml were >0.4 U for all species, with the exception of that for C. parapsilosis (A540 = 0.26 +/- 0.025). The MICs at 24 h determined by testing with 2% glucose and an inoculum of 10(5) CFU/ml showed the strongest agreement (96.83%) with MICs determined by the reference method. MICs were not falsely elevated, and good correlation indexes were obtained. The reproducibility of results with this medium-inoculum combination was high (intraclass correlation coefficient, 0.955). The best agreement and reproducibility of results for spectrophotometric readings were achieved with endpoints of 50% growth inhibition for flucytosine and azoles and 95% for amphotericin B. Supplementation of test media with glucose and an inoculum size of 10(5) CFU/ml yielded a reproducible technique that shows elevated agreement with the reference procedures and a shorter incubation period for obtaining reliable MIC determinations. The spectrophotometric method offers an advantage over the visual method by providing a more objective and automated MIC determination.     

Influence of Incubation Time, Inoculum Size, and Glucose Concentrations on Spectrophotometric Endpoint Determinations for Amphotericin B, Fluconazole, and Itraconazole

We addressed the influence of the incubation time (24 h versus 48 h), starting inoculum size (standard inoculum size, ~10³ CFU/ml, versus large inoculum size, ~10⁴ CFU/ml), and supplementation with 2% glucose of RPMI 1640 medium on the spectrophotometric determination of the MICs of amphotericin B, fluconazole, and itraconazole. We compared the MICs determined spectrophotometrically with those determined by the standard broth macrodilution method (National Committee for Clinical Laboratory Standards approved guideline M27-A). The agreement between the results of the spectrophotometric and standard methods for amphotericin B testing was 100%; this agreement was independent of the inoculum size and incubation time. On the other hand, the agreement for the results for fluconazole testing and itraconazole testing was dependent on the inoculum size and incubation time. With large inoculum size, excellent agreement can be achieved at 24 h. With standard inoculum size, acceptable agreement can be achieved only at 48 h. In contrast to previous observations, the addition of 2% glucose did not have any significant impact on the growth density at 24 h, nor did it improve the agreement with the standard method. Furthermore, supplemental glucose might falsely elevate the MIC at 48 h.     

Collaborative comparison of broth macrodilution and microdilution antifungal susceptibility tests.

A collaborative comparison of macro- and microdilution antifungal susceptibility tests was performed in five laboratories. MICs of amphotericin B, fluconazole, flucytosine, and ketoconazole were determined in all five centers against 95 coded isolates of Candida spp., Cryptococcus neoformans, and Torulopsis glabrata. A standard protocol with the following National Committee for Clinical Laboratory Standards Subcommittee on Antifungal Susceptibility Testing recommendations was used: an inoculum standardized by spectrophotometer, buffered (RPMI 1640) medium (pH 7.0), incubation at 35 degrees C, and an additive drug dilution procedure. Two inoculum sizes were tested (1 x 10(4) to 5 x 10(3) to 2.5 x 10(3) CFU/ml) and three scoring criteria were evaluated for MIC endpoint determinations, which were scored as 0 (optically clear), < or = 1 (slightly hazy turbidity), and < or = 2 (prominent decrease in turbidity compared with that of the growth control). Overall intra- and interlaboratory reproducibility was optimal with the low-density inoculum, the second-day readings, and MICs scored as either 1 or 2. The microdilution MICs demonstrated interlaboratory agreement with most of the four drugs higher than or similar to that of the macrodilution MICs. In general, there was good interlaboratory agreement with amphotericin B, fluconazole, and flucytosine; ketoconazole gave more variable results.     

Multicenter comparison of the VITEK 2 yeast susceptibility test with the CLSI broth microdilution reference method for testing fluconazole against Candida spp

A fully automated commercial antifungal susceptibility test system (VITEK 2 yeast susceptibility test; bioMerieux, Inc., Hazelwood, Mo.) was compared in three different laboratories with Clinical and Laboratory Standards Institute (CLSI) reference broth microdilution (BMD) method by testing two quality control strains and a total of 426 isolates of Candida spp. (103 to 135 clinical isolates in each laboratory plus 80 challenge isolates in one laboratory) against fluconazole. Reference BMD MIC endpoints were established after 24 and 48 h of incubation. VITEK 2 endpoints were determined spectrophotometrically after 10 to 26 h of incubation (mean, 13 h). Excellent essential agreement (within two dilutions) between the VITEK 2 and the 24- and 48-h BMD MICs was observed. The overall agreement values were 97.9 and 93.7%, respectively. Both intra- and interlaboratory agreement was 100%. The overall categorical agreement between VITEK 2 and BMD was 97.2% at the 24-h BMD time point and 88.3% at the 48-h BMD time point. Decreased categorical agreement at 48 h was attributed to trailing growth observed with Candida glabrata. The VITEK 2 system reliably detected fluconazole resistance among Candida spp. and demonstrated excellent quantitative and qualitative agreement with the reference BMD method.     

Effect of increasing inoculum sizes of pathogenic filamentous fungi on MICs of antifungal agents by broth microdilution method.

Inoculum size is a critical variable in development of methods for antifungal susceptibility testing for filamentous fungi. In order to investigate the influence of different inoculum sizes on MICs of amphotericin B, 5-fluorocytosine, itraconazole, and miconazole, 32 clinical isolates (8 Aspergillus fumigatus, 8 Aspergillus flavus, 5 Rhizopus arrhizus, 8 Pseudallescheria boydii, and 3 Fusarium solani isolates) were studied by the broth microdilution method. Four inoculum sizes were studied: 1 x 10(2) to 5 x 10(2), 1 x 10(3) to 5 x 10(3), 1 x 10(4) to 5 x 10(4), and 1 x 10(5) to 5 x 10(5) CFU/ml. The National Committee for Clinical Laboratory Standards reference method for antifungal susceptibility testing in yeasts was modified and applied to filamentous fungi. The inoculum was spectrophotometrically adjusted, and all tests were performed in buffered medium (RPMI 1640) at pH 7.0 with incubation at 35 degrees C for 72 h. MICs were read at 24, 48, and 72 h. Amphotericin B showed a minimum effect of inoculum size on MICs for all species with the exception of P. boydii (P < 0.05). A significant effect of inoculum size on MICs was observed with 5-fluorocytosine, for which there was an increase of more than 10-fold in MICs against all Aspergillus spp. between inoculum concentrations of 10(2) and 10(4) CFU/ml (P < 0.001). For itraconazole, the results showed a more species-dependent increase of MICs, most strikingly for R. arrhizus and P. boydii. Miconazole, which was tested only with P. boydii, did not demonstrate a significant effect of inoculum size on MICs.(ABSTRACT TRUNCATED AT 250 WORDS)     

Analysis of the influence of Tween concentration, inoculum size, assay medium, and reading time on susceptibility testing of Aspergillus spp

The influence of several test variables on susceptibility testing of Aspergillus spp. was assessed. A collection of 28 clinical isolates was tested against amphotericin B, itraconazole, voriconazole, and terbinafine. Inoculum size (10(4) CFU/ml versus 10(5) CFU/ml) and glucose supplementation (0.2% versus 2%) did not have significant effects on antifungal susceptibility testing results and higher inoculum size and glucose concentration did not falsely elevate MICs. In addition, antifungal susceptibility testing procedure with an inoculum size of 10(5) CFU/ml distinctly differentiated amphotericin B or itraconazole-resistant Aspergillus strains in vivo from the susceptible ones. Time of incubation significantly affected the final values of MICs, showing major increases (two to six twofold dilutions, P < 0.01 by analysis of variance) between MIC readings at 24 and 48 h, but no differences were observed between antifungal susceptibility testing results obtained at 48 h and at 72 h. Significantly higher MICs were uniformly associated with higher concentrations of Tween (P < 0.01), used as a dispersing agent in the preparation of inoculum suspensions. The geometric mean MICs showed increases of between 1.5- and 10-fold when the Tween concentration varied from 0.1% (the geometric means for amphotericin B, itraconazole, voriconazole, and terbinafine were 1.29, 0.69, 1.06, and 0.64 mug/ml, respectively) to 5% (the geometric means for amphotericin B, itraconazole, voriconazole, and terbinafine were 1.97, 5.79, 1.60, and 4.66 mug/ml, respectively). The inhibitory effect of Tween was clearly increased with inoculum sizes of 10(5) CFU/ml and was particularly dramatic for itraconazole, terbinafine, and Aspergillus terreus. The inoculum effect was not observed when the Tween concentration was below 0.5% (P > 0.01).     

Evaluation of broth microdilution testing parameters and agar diffusion Etest procedure for testing susceptibilities of Aspergillus spp. to caspofungin acetate (MK-0991)

The NCCLS M38-A document does not describe guidelines for testing caspofungin acetate (MK-0991) and other echinocandins against molds. This study evaluated the susceptibilities of 200 isolates of Aspergillus fumigatus, A. flavus, A. nidulans, A. niger, and A. terreus to caspofungin (MICs and minimum effective concentrations [MECs]) by using standard RPMI 1640 (RPMI) and antibiotic medium 3 (M3), two inoculum sizes (10(3) and 10(4) CFU/ml), and two MIC determination criteria (complete [MICs-0] and prominent growth inhibition [MICs-2]) at 24 and 48 h. Etest MICs were also determined. In general, caspofungin MIC-2 and MEC pairs were comparable with both media and inocula (geometric mean ranges of MECs and MICs, respectively, with larger inoculum: 0.12 to 0.64 microg/ml and 0.12 to 0.44 microg/ml with RPMI versus 0.04 to 0.51 microg/ml and 0.03 to 0.21 microg/ml with M3); however, MEC results were less influenced by testing conditions than MICs, especially with the larger inoculum. Overall, the agreement between caspofungin Etest MICs and broth dilution values was higher with MECs obtained with M3 (>90%) and the large inoculum than under the other testing conditions. Because RPMI is a more stable and chemically defined medium than M3, the determination at 24 h of the easier visual MECs with RPMI and the inoculum recommended in the M38-A document appears to be a suitable procedure at present for in vitro testing of caspofungin against Aspergillus spp. Future in vitro correlations with in vivo outcome of both microdilution and Etest procedures may detect more-relevant testing conditions.     

Multicenter comparison of the VITEK 2 antifungal susceptibility test with the CLSI broth microdilution reference method for testing amphotericin B, flucytosine, and voriconazole against Candida spp

A fully automated commercial antifungal susceptibility test system (VITEK 2; bioMérieux, Inc., Hazelwood, MO) was compared in three different laboratories with the Clinical and Laboratory Standards Institute (formerly the NCCLS) reference broth microdilution method (BMD) by testing 2 quality control strains, 10 reproducibility strains, and 426 isolates of Candida spp. against amphotericin B, flucytosine, and voriconazole. Reference BMD MIC endpoints were established after 24 and 48 h of incubation. VITEK 2 system MIC endpoints were determined spectrophotometrically after 9.1 to 27.1 h of incubation (mean, 12 to 14 h). Excellent essential agreement (within 2 dilutions) between the VITEK 2 system and the 24- and 48-h BMD MICs was observed for all three antifungal agents: amphotericin B, 99.1% and 97%, respectively; flucytosine, 99.1% and 98.8%, respectively; and voriconazole, 96.7% and 96%, respectively. Both intra- and interlaboratory agreements were >98% for all three drugs. The overall categorical agreements between the VITEK 2 system and BMD for flucytosine and voriconazole were 98.1 to 98.6% at the 24-h BMD time point and 96.9 to 97.4% at the 48-h BMD time point. The VITEK 2 system reliably detected flucytosine and voriconazole resistance among Candida spp. and demonstrated excellent quantitative and qualitative agreement with the reference BMD method.     

Clinical evaluation of the Sensititre YeastOne colorimetric antifungal panel for antifungal susceptibility testing of the echinocandins anidulafungin, caspofungin, and micafungin

A commercially prepared, dried colorimetric microdilution panel (Sensititre YeastOne Trek Diagnostic Systems, Cleveland, OH) was compared in three different laboratories with the Clinical and Laboratory Standards Institute (CLSI) reference microdilution method by testing 2 quality control strains, 25 reproducibility strains, and 404 isolates of Candida spp. against anidulafungin, caspofungin, and micafungin. Reference MIC endpoints and YeastOne colorimetric endpoints were read after 24 h of incubation. YeastOne endpoints were determined to be the lowest concentration at which the color in the well changed from red (positive, indicating growth) to blue (negative, indicating no growth). Excellent essential agreement (within 2 dilutions) between the reference and colorimetric MICs was observed. Overall agreement was 100% for all three agents. Categorical agreement ranged from 99.3% (anidulafungin) to 100% (caspofungin, micafungin) and interlaboratory reproducibility was 99%. The YeastOne colorimetric method appears to be comparable to the CLSI reference method for testing the susceptibility of Candida spp. to the echinocandins anidulafungin, caspofungin, and micafungin.     

Evaluation of a novel colorimetric broth microdilution method for antifungal susceptibility testing of yeast isolates.

A comparative evaluation of two broth microdilution methods for antifungal susceptibility testing of 600 clinical yeast isolates (Candida spp., Torulopsis glabrata, and Cryptococcus neoformans) against amphotericin B, fluconazole, and flucytosine (5FC) was conducted. Microdilution testing was performed according to National Committee for Clinical Laboratory Standards (NCCLS) recommendations (NCCLS document M27-P). By using the growth control for comparison, reference microdilution MIC endpoints for amphotericin B were scored as the lowest concentration at which a score of 0 (complete absence of growth) was observed, and those for 5FC and fluconazole were scored at the lowest concentration at which a score of 2 (prominent decrease in turbidity) (MIC-2) was observed. The second microdilution method employed a colorimetric endpoint using an oxidation-reduction indicator (Alamar Biosciences, Inc., Sacramento, Calif.) and was assessed independently of the reference microdilution MICs. The MICs for the two microdilution test systems were read after 24 and 48 h of incubation. Excellent agreement between the reference and colorimetric microdilution MICs was observed. Overall agreement was > or = 95% for all three drugs at 24 h. At 48 h, agreement was > or = 98% for amphotericin B and 5FC but dropped to 84% for fluconazole. Given these results it appears that the colorimetric microdilution approach to antifungal susceptibility testing may be viable alternative to the NCCLS reference method for testing yeasts.     

Clinical evaluation of the Sensititre YeastOne colorimetric antifungal plate for antifungal susceptibility testing of the new triazoles voriconazole, posaconazole, and ravuconazole

A commercially prepared dried colorimetric microdilution panel (Sensititre YeastOne, TREK Diagnostic Systems, Cleveland, Ohio) was compared in three different laboratories with the National Committee for Clinical Laboratory Standards (NCCLS) reference microdilution method by testing two quality control strains and 300 clinical isolates of Candida spp. against fluconazole, voriconazole, posaconazole, and ravuconazole. Reference MIC endpoints were established after 48 h of incubation and YeastOne colorimetric endpoints were established after 24 h of incubation. YeastOne endpoints were determined to be the lowest concentration at which the color in the well changed from red (indicating growth) to purple (indicating growth inhibition) or blue (indicating no growth). Excellent agreement (within two dilutions) between the reference and colorimetric MICs was observed. Overall agreement was 95.4%. Agreement ranged from 92.3% with posaconazole to 98.0% with fluconazole. The YeastOne colorimetric method appears to be comparable to the NCCLS reference method for testing the susceptibility of Candida spp to the new triazoles voriconazole, posaconazole, and ravuconazole.     

In vitro susceptibility testing of filamentous fungi: comparison of Etest and reference microdilution methods for determining itraconazole MICs

The performance of the Etest for itraconazole susceptibility testing of 50 isolates of filamentous fungi was assessed in comparison with the National Committee for Clinical Laboratory Standards (NCCLS) proposed standard microdilution broth method. The NCCLS method employed RPMI 1640 broth medium, and MICs were read after incubation for 48 h at 35 degrees C. Etest MICs were determined with RPMI agar containing 2% glucose and with Casitone agar and were read after incubation for 24 h (Aspergillus spp. and Rhizopus spp.) and 48 h (all species except Rhizopus spp.) at 35 degrees C. The isolates included Aspergillus flavus, Aspergillus fumigatus, Aspergillus niger, Aspergillus terreus, Fusarium spp., Pseudallescheria boydii, Rhizopus spp., Paecilomyces variotii, and an Acremonium sp. Overall agreement between Etest and microdilution MICs was 96% with RPMI agar and 80% with Casitone agar. The agreement was 100% for all species except Rhizopus spp. (83%) and Paecilomyces varioti (0%) with RPMI agar. When Casitone agar was used, the agreement ranged from 50% with Rhizopus spp. to 100% with Fusarium spp., P. boydii, P. varioti, and an Acremonium sp. Notably, for Aspergillus spp., the agreement between itraconazole Etest MICs read at 24 h and reference microdilution MICs read at 48 h was 100% with both RPMI and Casitone agar. Both media supported the growth of all filamentous fungi tested. Where a discrepancy was observed between Etest and the reference method, the Etest MIC was generally higher. The Etest method using RPMI agar appears to be a useful method for determining itraconazole susceptibilities of Aspergillus spp. and other filamentous fungi.     

Comparative evaluation of alternative methods for broth dilution susceptibility testing of fluconazole against Candida albicans.

A comparative evaluation of methods for broth macro- and microdilution susceptibility testing of fluconazole was conducted with 119 clinical isolates of Candida albicans. Macro- and microdilution testing were performed according to National Committee for Clinical Laboratory Standards recommendations. For reference macrodilution testing, an 80% inhibition endpoint (MIC 80%) was determined after 48 h of incubation in accordance with National Committee for Clinical Laboratory Standards proposed standard M27-P. Microdilution endpoints were scored as the first tube or well in which a prominent reduction in turbidity (score 2 out of a possible 4) was observed compared with the growth control (Micro MIC-2). Alternative endpoint criteria were assessed independently of the reference MIC 80% and Micro MIC-2 values and included a colorimetric microdilution endpoint determined by using an oxidation-reduction indicator (Alamar Blue; Alamar Bio-sciences Inc., Sacramento, Calif.). The MICs for the two microdilution test systems were read after 24 and 48 h of incubation. The percentage of fluconazole MICs within 2 doubling dilutions of the macrodilution reference values was 94% for both microdilution tests read at 24 h. Agreement was slightly lower at 48 h and ranged from 91 to 93%. Comparison of Micro MIC-2 and colorimetric microdilution MICs resulted in agreements of 97 and 93% at 24 and 48 h, respectively. These results show excellent agreement among alternative methods for fluconazole susceptibility testing.     

Comparative evaluation of macrodilution and alamar colorimetric microdilution broth methods for antifungal susceptibility testing of yeast isolates.

A comparative evaluation of the macrodilution method and the Alamar colorimetric method for the susceptibility testing of amphotericin B, fluconazole, and flucytosine was conducted with 134 pathogenic yeasts. The clinical isolates included 28 Candida albicans, 17 Candida tropicalis, 15 Candida parapsilosis, 12 Candida krusei, 10 Candida lusitaniae, 9 Candida guilliermondii, 18 Torulopsis glabrata, and 25 Cryptococcus neoformans isolates. The macrodilution method was performed and interpreted according to the recommendations of the National Committee for Clinical Laboratory Standards (document M27-P), and the Alamar colorimetric method was performed according to the manufacturer's instructions. For the Alamar colorimetric method, MICs were determined at 24 and 48 h of incubation for Candida species and T. glabrata and at 48 and 72 h of incubation for C. neoformans. The overall agreement within +/- 1 dilution for Candida species and T. glabrata against the three antifungal agents was generally good, with the values for amphotericin B, fluconazole, and flucytosine being 85.3, 77.9, and 86.2%, respectively, at the 24-h readings and 69.3, 65.2, and 97.2%, respectively, at the 48-h readings. Most disagreement was noted with fluconazole against C. tropicalis and T. glabrata. Our studies indicate that determination of MICs at 24 h by the Alamar colorimetric method is a valid alternate method for testing amphotericin B, fluconazole, and flucytosine against Candida species but not for testing fluconazole against C. tropicalis and T. glabrata. For flucytosine, much better agreement can be demonstrated against Candida species and T. glabrata at the 48-h readings by the Alamar method.(ABSTRACT TRUNCATED AT 250 WORDS)     

Interlaboratory evaluation of Etest method for testing antifungal susceptibilities of pathogenic yeasts to five antifungal agents by using Casitone agar and solidified RPMI 1640 medium with 2% glucose.

An interlaboratory evaluation (two centers) of the Etest method was conducted for testing the antifungal susceptibilities of yeasts. The MICs of amphotericin B, fluconazole, flucytosine, itraconazole, and ketoconazole were determined for 83 isolates of Candida spp., Cryptococcus neoformans, and Torulopsis glabrata. Two buffered (phosphate buffer) culture media were evaluated: solidified RPMI 1640 medium with 2% glucose and Casitone agar. MIC endpoints were determined after both 24 and 48 h of incubation at 35 degrees C. Analysis of 3,420 MICs demonstrated higher interlaboratory agreement (percentage of MIC pairs within a 2-dilution range) with Casitone medium than with RPMI 1640 medium when testing amphotericin B (84 to 90% versus 1 to 4%), itraconazole (87% versus 63 to 74%), and ketoconazole (94 to 96% versus 88 to 90%). In contrast, better interlaboratory reproducibility was determined between fluconazole MIC pairs when RPMI 1640 medium rather than Casitone medium was used (96 to 98% versus 77 to 90%). Comparison of the flucytosine MICs obtained with RPMI 1640 medium revealed greater than 80% reproducibility. The study suggests the potential value of the Etest as a convenient alternative method for testing the susceptibilities of yeasts. It also indicates the need for further optimization of medium formulations and MIC endpoint criteria to improve interlaboratory agreement.     

Clinical Evaluation of the ASTY Colorimetric Microdilution Panel for Antifungal Susceptibility Testing

A method using a commercially prepared colorimetric microdilution panel (ASTY; Kyokuto Pharmaceutical Industrial Co., Ltd.) was compared in four different laboratories with the National Committee for Clinical Laboratory Standards (NCCLS) reference microdilution method by testing 802 clinical isolates of Candida spp. (C. albicans, C. glabrata, C. tropicalis, C. parapsilosis, C. krusei, C. lusitaniae, C. guilliermondii, C. lipolytica, C. rugosa, and C. zeylanoides) against amphotericin B, 5-fluorocytosine (5FC), fluconazole, and itraconazole. Reference MIC endpoints were established after 48 h of incubation, and ASTY endpoints were established after 24 and 48 h of incubation. ASTY endpoints were determined to be the time at which the color of the first well changed from red (indicating growth) to purple (indicating growth inhibition) or blue (indicating no growth). Excellent agreement (within 2 dilutions) between the reference and colorimetric MICs was observed. Overall agreement was 93% at 24 h and 96% at 48 h. Agreement ranged from 90% with itraconazole and 5FC to 96% with amphotericin B at 24 h and from 92% with itraconazole to 99% with amphotericin B and 5FC at 48 h. The ASTY colorimetric microdilution panel method appears to be comparable to the NCCLS reference method for testing the susceptibilities of Candida spp. to a variety of antifungal agents.     

Susceptibility testing of Cryptococcus neoformans: a microdilution technique.

We studied a series of test conditions in a microtiter system to define the optimal method for determining the susceptibility of Cryptococcus neoformans to antifungal agents. Twenty-one isolates of C. neoformans were grown for 24 or 48 h in four chemically defined media: yeast nitrogen base (BYNB 7); RPMI 1640; synthetic amino acid medium--fungal (SAAMF), buffered at pH 7.0 to select the medium that best supported growth of this fastidious yeast; and yeast nitrogen base, pH 5.4 (YNB 5.4). Maximum growth of C. neoformans, at 35 degrees C, was obtained in YNB 5.4, with the next highest growth levels in BYNB 7, SAAMF, and RPMI. Growth at 24 h was uniformly poor in all media and lacked reproducibility. In contrast, incubation for 48 h gave adequate growth with low standard deviations, and 48 h was selected as the optimal incubation period for this study. Comparison of the relationship between growth kinetics and initial inoculum size for eight cryptococcal isolates showed that 10(4) cells per ml yielded optimal growth in BYNB 7 and YNB 5.4, whereas 10(5) cells per ml was optimal in RPMI and SAAMF. Furthermore, variation of inocula from 10(3) to 10(5) cells per ml showed small but significant inoculum effects in determining MICs of fluconazole, amphotericin B, and flucytosine for C. neoformans. Therefore, 10(4) cells per ml was chosen as the optimal inoculum for susceptibility testing in this study. Mean MICs of fluconazole, amphotericin B, and flucytosine for 21 crytococcal isolates in RPMI and BYNB 7 were low (for example, fluconazole had mean MICs of 1.2 and 1.3 micrograms/ml in RPMI and BYNB 7, respectively) and differed significantly from medium to medium. In contrast, the MICs obtained in SAAMF were significantly higher (e.g., fluconazole had a mean MIC of 2.2 micrograms/ml). Variance in MICs was large with fluconazole and flucytosine but small with amphotericin B, irrespective of the medium used. A microtiter system employing BYNB 7 as the medium, 48 h as the incubation period, and 10(4) cells per ml as the final inoculum is a simple, accurate, and reproducible method for the testing of C. neoformans susceptibility to fluconazole, amphotericin B, and flucytosine.     

Multicenter comparison of the Sensititre YeastOne colorimetric antifungal panel with the NCCLS M27-A2 reference method for testing new antifungal agents against clinical isolates of Candida spp

A multicenter (three centers) study compared MICs obtained by the Sensititre YeastOne Colorimetric Antifungal plate to reference microdilution broth (NCCLS M27-A2 document) MICs of three new triazoles (posaconazole, ravuconazole, and voriconazole) and the echinocandin caspofungin acetate for 100 isolates of Candida spp. In addition, amphotericin B and fluconazole were tested as control drugs. Colorimetric MICs of caspofungin and amphotericin B corresponded to the first blue well (no growth), and MICs of the other agents corresponded to the first slightly purple or blue well. Two comparisons of MIC pairs by the two methods were evaluated: 24-h colorimetric MICs were compared to NCCLS MICs at 24 and at 48 h. The interlaboratory reproducibility of YeastOne and reference MICs was also examined. The best performance of the YeastOne plate was with 24-h MICs (overall, 95 to 99% agreement) for all the species and antifungal agents. These results suggest the potential value of the YeastOne plate for use in the clinical laboratory for the four new antifungal agents evaluated.