SLN and NLC for topical delivery of ketoconazole

The clinical use of ketoconazole has been related to some adverse effects in healthy adults, specially local reactions, such as severe irritation, pruritus and stinging. The purpose of the present work is the assessment of ketoconazole stability in aqueous SLN and NLC dispersions, as well as the physicochemical stability of these lipid nanoparticles, which might be useful for targeting this drug into topical route, minimizing the adverse side effects and providing a controlled release. Lipid particles were prepared using Compritol®888 ATO as solid lipid. The natural antioxidant α-tocopherol was selected as liquid lipid compound for the preparation of NLC. Ketoconazole loading capacity was identical for both SLN and NLC systems (5% of particle mass). SLN were physically stable as suspensions during 3 months of storage, but the SLN matrix was not able to protect the chemically labile ketoconazole against degradation under light exposure. In contrast, the NLC were able to stabilize the drug, but the aqueous NLC dispersion showed size increase during storage. Potential topical formulations are light-protected packaged SLN or NLC physically stabilized in a gel formulation.     

Solid lipid nanoparticles and nanostructured lipid carriers--innovative generations of solid lipid carriers

The first generation of solid lipid carrier systems in nanometer range, Solid Lipid Nanoparticles (SLN), was introduced as an alternative to liposomes. SLN are aqueous colloidal dispersions, the matrix of which comprises of solid biodegradable lipids. SLN are manufactured by techniques like high pressure homogenization, solvent diffusion method etc. They exhibit major advantages such as modulated release, improved bioavailability, protection of chemically labile molecules like retinol, peptides from degradation, cost effective excipients, improved drug incorporation and wide application spectrum. However there are certain limitations associated with SLN, like limited drug loading capacity and drug expulsion during storage, which can be minimized by the next generation of solid lipids, Nanostructured lipid carriers (NLC). NLC are lipid particles with a controlled nanostructure that improves drug loading and firmly incorporates the drug during storage. Owing to their properties and advantages, SLN and NLC may find extensive application in topical drug delivery, oral and parenteral administration of cosmetic and pharmaceutical actives. Cosmeceuticals is emerging as the biggest application target of these carriers. Carrier systems like SLN and NLC were developed with a perspective to meet industrial needs like scale up, qualification and validation, simple technology, low cost etc. This paper reviews present status of SLN and NLC as carrier systems with special emphasis on their application in Cosmeceuticals; it also gives an overview about various manufacturing techniques of SLN and NLC.     

The use of SLN and NLC as topical particulate carriers for imidazole antifungal agents

Two different imidazole antifungal agents have been used as model drugs to be incorporated into solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC), once they are very well established as anti-mycotics for the treatment of topical fungal infections. Because of the high mucoadhesive properties and the strong in situ gelling properties of polyacrylic acid polymers, hydrogels prepared with those macromolecules might be a promising vehicle for imidazole-loaded lipid nanoparticles, such as the above-mentioned SLN and NLC. Thus, in this study Carbopol 934 has been selected for the preparation of semi-solid formulations based on SLN and NLC. Formulations have been stored at three different temperatures before and after particle incorporation into polyacrylate hydrogels. The particle size and the chemical stability of incorporated model drugs have been monitored by HPLC analysis for two years. On the day of production 91.7% and 98.7% of clotrimazole, but only 62.1% and 70.3% of ketoconazole have been recovered from SLN and NLC, respectively. More than 95% of clotrimazole but less than 30% of ketoconazole were detected in the developed formulations after a shelf life of two years. Those values showed to be higher than those obtained with reference emulsions of similar composition and droplet sizes. By rheological measurements a pseudoplastic behaviour with thixotropic properties has been characterized for all semi-solid systems.     

Polymorphic behaviour of Compritol888 ATO as bulk lipid and as SLN and NLC

CompritolR888 ATO (glycerol behenate) is widely used as a pharmaceutical excipient in the field of solid dosage forms due to its lubricating properties. It is an amphiphilic material with a high melting point (approximately 70 degrees C) and, therefore, it can also be used to prepare aqueous colloidal dispersions. The aim of this paper is to study the suitability of CompritolR888 ATO for the production of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) for the entrapment of a lipophilic model drug. This study assesses the crystalline structure of the bulk lipid, as well as the changes that occur in its crystal lattice with the addition of 'impurities', such as oil (alpha-tocopherol) and drug (ketoconazole), using DSC and X-ray diffraction analysis before and after thermal stress. Aqueous SLN and NLC dispersions were produced using an appropriate surfactant/co-surfactant system and their physicochemical stability was assessed by PCS, LD, DSC and by WAXS. It was found that the crystalline lattice of CompritolR888 ATO is composed of very small amounts of the unstable alpha polymorphic form characteristic of triacylglycerols, which disappears after thermal stress of bulk lipid. Mixing oils and drug molecules which are soluble in this lipid decreased its lattice organization and, thus, was revealed to be suitable for production of lipid nanoparticles containing ketoconazole. However, particle growth could not be avoided during shelf life.     

Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) for application of ascorbyl palmitate

The aim of this study was to improve the chemical stability of ascorbyl palmitate (AP) in a colloidal lipid carrier for its topical use. For this purpose, AP-loaded solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC) and for comparison, a nanoemulsion (NE) were prepared employing the high pressure homogenization technique and stored at room temperature (RT), 4 degrees C and 40 degrees C. During 3 months, physical stability of these formulations compared to placebo formulations which were prepared by the same production method, was studied including recrystallization behaviour of the lipid with differential scanning calorimetry (DSC), particle size distribution and storage stability with photon correlation spectroscopy (PCS) and laser diffractometry (LD). After evaluating data indicating excellent physical stability, AP-loaded SLN, NLC and NE were incorporated into a hydrogel by the same production method as the next step. Degradation of AP by HPLC and physical stability in the same manner were investigated at the same storage temperatures during 3 months. As a result, AP was found most stable in both the NLC and SLN stored at 4 degrees C (p > 0.05) indicating the importance of storage temperature. Nondegraded AP content in NLC, SLN and NE was found to be 71.1% +/- 1.4, 67.6% +/- 2.9 and 55.2% +/- 0.3 after 3 months, respectively. Highest degradation was observed with NE at all the storage temperatures indicating even importance of the carrier structure.     

Evaluation of the physical stability of SLN and NLC before and after incorporation into hydrogel formulations.

Aqueous dispersions of lipid nanoparticles are being investigated as drug delivery systems for different therapeutic purposes. One of their interesting features is the possibility of topical use, for which these systems have to be incorporated into commonly used dermal carriers, such as creams or hydrogels, in order to have a proper semisolid consistency. For the present investigation four different gel-forming agents (xanthan gum, hydroxyethylcellulose 4000, Carbopol943 and chitosan) were selected for hydrogel preparation. Aqueous dispersions of lipid nanoparticles--solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC)--made from tripalmitin were prepared by hot high pressure homogenization and then incorporated into the freshly prepared hydrogels. NLC differ from SLN due to the presence of a liquid lipid (Miglyol812) in the lipid matrix. Lipid nanoparticles were physically characterized before and after their incorporation into hydrogels. By means of rheological investigations it could be demonstrated that physical properties of the dispersed lipid phase have a great impact on the rheological properties of the prepared semisolid formulations. By employing an oscillation frequency sweep test, significant differences in elastic response of SLN and NLC aqueous dispersions could be observed.     

Polymorphic behaviour of Compritol®888 ATO as bulk lipid and as SLN and NLC

Compritol®888 ATO (glycerol behenate) is widely used as a pharmaceutical excipient in the field of solid dosage forms due to its lubricating properties. It is an amphiphilic material with a high melting point (～70°C) and, therefore, it can also be used to prepare aqueous colloidal dispersions. The aim of this paper is to study the suitability of Compritol®888 ATO for the production of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) for the entrapment of a lipophilic model drug. This study assesses the crystalline structure of the bulk lipid, as well as the changes that occur in its crystal lattice with the addition of ‘impurities’, such as oil (α-tocopherol) and drug (ketoconazole), using DSC and X-ray diffraction analysis before and after thermal stress. Aqueous SLN and NLC dispersions were produced using an appropriate surfactant/co-surfactant system and their physicochemical stability was assessed by PCS, LD, DSC and by WAXS. It was found that the crystalline lattice of Compritol®888 ATO is composed of very small amounts of the unstable α polymorphic form characteristic of triacylglycerols, which disappears after thermal stress of bulk lipid. Mixing oils and drug molecules which are soluble in this lipid decreased its lattice organization and, thus, was revealed to be suitable for production of lipid nanoparticles containing ketoconazole. However, particle growth could not be avoided during shelf life.     

Investigation of the factors influencing the incorporation of clotrimazole in SLN and NLC prepared by hot high-pressure homogenization

Clotrimazole, a fungicidal effective for the local treatment of cutaneous and mucosal infections, was incorporated into solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC). The aim was to increase its dermal bioavailability and to control drug release, thereby potentially reducing its side effects. Prior to the release studies, the carrier was optimized and characterized by using different techniques. Laser diffractometry (LD), photon correlation spectroscopy (PCS) and scanning electron microscopy (SEM) indicated that SLN were spherical in shape with a mean size of approximately 400 nm. Some aggregation phenomena occurred during preparation of SEM samples due to the lipid character of the carriers. No physico-chemical instability of the drug-loaded lipid nanoparticles was detected during 2 years of storage at different temperatures. X-ray and DSC results suggested that during storage time the drug remained molecularly dispersed in the lipid matrix. Drug associated to SLN and NLC in its crystal form could be excluded.     

Skin moisturizing effect and skin penetration of ascorbyl palmitate entrapped in solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) incorporated into hydrogel

This study was performed as a complimentary to our previous study regarding the chemical stability of ascorbyl palmitate (AP) in solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC) and for comparison, in nanoemulsion (NE) incorporated into a hydrogel produced by high pressure homogenization. AP is known as an effective antioxidant that protects tissue integrity similar to vitamin C. Recently, its moisturizing activity in conventional topical formulations was found to be high. The aim of the present study was to investigate the moisturizing potential of AP in SLN and NLC incorporated into hydrogel as colloidal carrier systems. It has been known that SLN and NLC have occlusive effects, but AP incorporation moisturized skin significantly better than placebo in short-term (p < 0.001) and long-term trials (p < 0.01) for both SLN and NLC. In the second part of the study, SLN and NLC were found to sustain the penetration of AP through excised human skin about 1/2 and 2/3 times compared to NE (p < 0.001 and p < 0.01), respectively, due to the solid state of Witepsol E85 in the lipid phase.     

Development of a controlled release formulation based on SLN and NLC for topical clotrimazole delivery

Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) are colloidal carrier systems providing controlled release profiles for many substances. Clotrimazole-loaded SLN and NLC were prepared by the hot high pressure homogenization technique in order to evaluate the physical stability of these particles, as well as the entrapment efficiency of this lipophilic drug and its in vitro release profile. The particle size was analyzed by PCS and LD showing that the particles remained in their colloidal state during 3 months of storage at 4, 20 and 40 degrees C. For all tested formulations the entrapment efficiency was higher than 50%. The obtained results also demonstrate the use of these lipid nanoparticles as modified release formulations for lipophilic drugs over a period of 10 h.     

Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) in cosmetic and dermatological preparations

Solid lipid nanoparticles (SLN) were developed at the beginning of the 1990 s as an alternative carrier system to emulsions, liposomes and polymeric nanoparticles. The paper reviews advantages-also potential limitations-of SLN for the use in topical cosmetic and pharmaceutical formulations. Features discussed include stabilisation of incorporated compounds, controlled release, occlusivity, film formation on skin including in vivo effects on the skin. As a novel type of lipid nanoparticles with solid matrix, the nanostructured lipid carriers (NLC) are presented, the structural specialties described and improvements discussed, for example, increase in loading capacity, physical and chemical long-term stability, triggered release and potentially supersaturated topical formulations. For both SLN and NLC, the technologies to produce the final topical formulation are described, especially the production of highly concentrated lipid nanoparticle dispersions >30-80% lipid content. Production issues also include clinical batch production, large scale production and regulatory aspects (e. g. status of excipients or proof of physical stability).     

Formulation and in vitro characterization of domperidone loaded solid lipid nanoparticles and nanostructured lipid carriers

Background and the purpose of the study

Domperidone (DOM) is a dopamine- receptor (D₂) antagonist, widely used in the treatment of motion-sickness. The pharmacokinetic parameters of DOM make it a suitable candidate for development of Solid Lipid Nanoparticle (SLN) and Nanostructured Lipide Carrier (NLC). The purpose of the present investigation was to prepare and evaluate DOM loaded solid lipid nanoparticles (DOM-SLN) and DOM loaded nanostructured lipid carriers (DOM-NLC).

Methods

DOM loaded SLN and NLC were prepared by hot homogenization followed by ultrasonication technique, using trimyristin as solid lipid, cetyl recinoleate as liquid lipid and a mixture of soy phosphatidylcholine (99%) and tween 80 as surfactant. SLN and NLC were characterized for particle size, polydispersity index (PDI), zeta potential and entrapment efficiency. The effects of composition of lipid materials and surfactant mixture on the particle size, PDI, zeta potential, drug entrapment efficiency, and in vitro drug release behavior were investigated. DSC analysis was performed to characterize the state of drug and lipid modification. Shape and surface morphology were determined by transmission electron microscopy (TEM). SLN and NLC formulations were subjected to stability study over a period of 40 days.

Results

The mean particle size, PDI, zeta potential and entrapment efficiency of optimized SLN (SLN1) and NLC were found to be 30.45 nm, 0.156, 12.40 mV, 87.84% and 32.23 nm, 0.160, 10.47 mV, 90.49% respectively. DSC studies revealed that DOM was in an amorphous state and triglycerides were in the β prime form in SLN and NLC. Shape and surface morphology was determined by TEM revealed fairly spherical shape of nanoparticles. In vitro release studies demonstrated that both the SLN and NLC formulations possessed a controlled release over a period of 24 hrs. SLN and NLC formulations were subjected to stability over a period of 40 days. There was no significant (P<0.05) change in particle size, zeta potential, PDI and entrapment efficiency indicating the developed SLN and NLC were fairly stable.

Conclusion

Fairly spherical shaped, stable and controlled release DOM-SLN and DOM-NLC could be prepared by hot homogenization followed by ultrasonication technique.     

Preparation and characteristics of monostearin nanostructured lipid carriers

Nanostuctured lipid carriers (NLC) consisted of solid lipid and liquid lipid are a new type of lipid nanoparticles, which offer the advantage of improved drug loading capacity and release properties. In this study, solvent diffusion method was employed to produce NLC. Monostearin (MS) and caprylic/capric triglycerides (CT) were chosen as the solid lipid and liquid lipid. Clobetasol propionate used as a model drug was incorporated into the NLC. The influences of preparation temperature and CT content on physicochemical properties of the NLC were characterized. As a result, monostearin solid lipid nanoparticles (without CT content, SLN) obtained at higher temperature (70 degrees C) exhibited slightly higher drug loading capacity than that of 0 degrees C (P < 0.05). In contrast, the production temperature made little effect on NLC drug loading capacity (P > 0.05). The improved drug loading capacity was observed for NLC and it enhanced with increasing the CT content in NLC. The results were explained by differential scanning calorimetry (DSC) measurement for NLC. The incorporation of CT to NLC led to crystal order disturbance and thus left more space to accommodate drug molecules. NLC displayed a good ability to reduce the drug expulsion in storage compared to SLN. The in vitro release behaviors of NLC were dependent on the production temperature and CT content. NLC obtained at 70 degrees C exhibited biphasic drug release pattern with burst release at the initial 8h and prolonged release afterwards, whereas NLC obtained at 0 degrees C showed basically sustained drug release throughout the release time. The drug release rates were increased with increasing the CT content. These results indicated that the NLC produced by solvent diffusion method could potentially be exploited as a carrier with improved drug loading capacity and controlled drug release.     

Solid lipid nanoparticles (SLN) for topical drug delivery: incorporation of the lipophilic drugs N,N-diethyl-m-toluamide and vitamin K

Solid lipid nanoparticles (SLN) for topical delivery were prepared by high pressure homogenization using solid lipids. The lipophilic agents DEET (N,N-diethyl-m-toluamide) and vitamin K were used as model drugs. These topical agents were incorporated into SLN which were characterized. Differential scanning calorimetry studies were performed in order to detect probable interactions in the SLN dispersions. Physical stability of SLN in aqueous dispersions and the effect of drug incorporation into SLN were investigated by photon correlation spectroscopy and zeta potential measurements. Characterization and short-term stability studies showedthat DEET and vitamin K are good candidates for topical SLN formulations.     

Nanostructured lipid carriers (NLC) in cosmetic dermal products

The first generation of lipid nanoparticles was introduced as solid lipid nanoparticles (SLN), the second, improved generation as nanostructured lipid carriers (NLC). Identical to the liposomes, the lipid nanoparticles (NLC) appeared as products first on the cosmetic market. The article gives an overview of the cosmetic benefits of lipid nanoparticles, that means enhancement of chemical stability of actives, film formation, controlled occlusion, skin hydration, enhanced skin bioavailability and physical stability of the lipid nanoparticles as topical formulations. NLC are on the market as concentrates to be used as cosmetic excipients, special formulation challenges for these products are discussed. NLC appeared also in a number of finished cosmetic products world-wide. An overview of these products is provided including their special effects due to the lipid nanoparticles, lipids used for their production and incorporated cosmetic actives.     

Lipid nanoparticles as novel delivery systems for cosmetics and dermal pharmaceuticals

INTRODUCTION: Lipid nanoparticles are innovative carrier systems developed as an alternative to traditional vehicles such as emulsions, liposomes and polymeric nanoparticles. Solid lipid nanoparticles (SLN) and the newest nanostructured lipid carriers (NLC) show important advantages for dermal application of cosmetics and pharmaceuticals. AREA COVERED: This article focuses on the main features of lipid nanoparticles, in terms of their preparation and recent advancements. A detailed review of the literature is presented, introducing the importance of these systems in the topical delivery of drugs and active substances. EXPERT OPINION: Lipid nanoparticles are able to enhance drug penetration into the skin, allowing increased targeting to the epidermis and consequently increasing treatment efficiency and reducing the systemic absorption of drugs and cosmetic actives. The complete biodegradation of lipid nanoparticles and their biocompatible chemical nature have secured them the title of 'nanosafe carriers.' SLN and NLC represent a new technological era, which has been taken over by the cosmetic and pharmaceutical industry, which will open new channels for effective topical delivery of substances.     

Preparation, characterization and physico-chemical properties of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC): their benefits as colloidal drug carrier systems

Solid lipid nanoparticles (SLN) have attracted increasing attention by various research groups and companies since the early 1990s. Their advantages over existing traditional carriers have been clearly documented. In addition, modified SLN have been described which are nanostructured lipid carriers (NLC) composed of liquid lipid blended with a solid lipid to form a nanostructured solid particle matrix. NLC combine controlled release characteristics with some advantages over SLN. This paper reviews the production techniques, characterization and physical stability of these systems including destabilizing factors and principles of drug loading, then considers aspects and benefits of SLN and NLC as colloidal drug carriers.     

Characterization of indomethacin-loaded lipid nanoparticles by differential scanning calorimetry

Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) are interesting nanoparticulate delivery systems produced from solid lipids. Both carrier types are submicron size particles but they can be distinguished by their inner structure. In the present paper, indomethacin (IND)-loaded SLN and NLC were prepared and the organization and distribution of the different ingredients originating each type of nanoparticle system were studied by differential scanning calorimetry (DSC) technique. Furthermore, mean particle size and percentage of drug encapsulation were also determined. From the results obtained, NLC lipid organization guaranteed an increased indomethacin encapsulation in comparison with SLN. DSC static and dynamic measurements performed on SLN and NLC showed that oil nanocompartments incorporated into NLC solid matrix drastically influenced drug distribution inside the nanoparticle system. Controlled release from NLC system could be explained considering both drug partition between oil nanocompartments and solid lipid and a successive partition between solid lipid and water.     

Hydrophilic coating of mitotane-loaded lipid nanoparticles: Preliminary studies for mucosal adhesion

The aim of the present work was to load mitotane, an effective drug for adrenocortical carcinoma treatment, in solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC). The SLN and NLC were successfully prepared by high shear homogenization followed by hot high pressure homogenization. Formulations were composed of cetyl palmitate as the solid lipid for SLN, whereas for NLC PEGylated stearic acid was selected as solid lipid and medium chain triacylglycerols as the liquid lipid. Tween® 80 and Span® 85 were used as surfactants for all formulations. The particle size, zeta potential, polydispersity index (PI), encapsulation efficiency (EE), and loading capacity (LC) were evaluated. The SLN showed a mean particle size of 150?nm, PI of 0.20, and surface charge ?10 mV, and the EE and LC could reach up to 92.26% and 0.92%, respectively. The NLC were obtained with a mean particle size of 250?nm, PI of 0.30, zeta potential ?15 mV and 84.50% EE, and 0.84% LC, respectively. Hydrophilic coating of SLN with chitosan or benzalkonium chloride was effective in changing zeta potential from negative to positive values. The results suggest that mitotane was efficiently loaded in SLN and in NLC, being potential delivery systems for improving mitotane LC and controlled drug release.     

纳米结构脂质载体的制备及性质研究进展

纳米结构脂质载体(nanostructured lipid carrier,NLC)是在固体脂质纳米粒基础上发展的脂质纳米粒,它由固体脂质和液态脂质混合制备而得。综述了NLC的制备方法、粒径形态、载药能力、晶型结构、稳定性及应用的研究进展。