Stability-indicating Reversed-phase Liquid Chromatographic Method for Simultaneous Determination of Losartan Potassium and Ramipril in Tablets

A stability-indicating reversed-phase liquid chromatographic method has been developed and validated for simultaneous determination of losartan potassium and ramipril. Separations were achieved using a C₁₈ column with mobile phase consisting of acetonitrile and (0.2% v/v, pH 2.5) aqueous trifluoroacetic acid (45:55, v/v) in isocratic mode at 1 ml/min flow rate. Column effluent was monitored at 210 nm using a UV detector. The method was validated for selectivity, linearity, accuracy, precision, sensitivity and robustness. Novel microwave-assisted forced degradation technique was employed for evaluation of selectivity. The method demonstrated excellent linearity for losartan potassium and ramipril with regression coefficients of 0.9999 and 0.9998, respectively. The linearity range was found to be 62.5-5000 ng/ml and 125-10,000 ng/ml with the mean percentage recoveries of 100.36% (±2.27) and 100.16% (±3.33) for losartan potassium and ramipril, respectively. In a robustness study, a full factorial design revealed that the analytical response remains unaffected by small variations in the critical chromatographic factors. The method was found to be sensitive with quantification limits of 44.30 and 79.93 ng/ml for losartan potassium and ramipril. The method was successfully employed for the determination of losartan potassium and ramipril in commercially available and in-house prepared tablets.     

Quantization of Dextromethorphan and Levocetirizine in Combined Dosage form Using a Novel Validated RP-HPLC Method

The present study reveals a simple isocratic RP-HPLC method for the simultaneous determination of dextromethorphan hydrobromide and levocetirizine dihydrochloride in a cough syrup. The separation of these compounds was achieved within 10 min on a Phenomenex (USA) C₁₈ analytical column, 250×4.0 mm i.d., using an isocratic mobile phase consisting of potassium dihydrogen phosphate buffer (pH 2.5) - acetonitrile- tetrahydrofuran (70:25:5, v/v/v). The analysis was performed at a flow rate of 1.2 ml/min and at a detection wavelength of 232 nm. Percentage recovery and RSD were 100.36% and 0.05% for levocetirizine dihydrochloride, 100.35% and 0.27% for dextromethorphan hydrobromide respectively. Quantification of the components in syrup formulation was calculated against the peak areas of freshly prepared standard solutions. The method was validated as per ICH guidelines.     

Development and Characterization of Pharmacokinetic Parameters of Fast-Dissolving Films Containing Levocetirizine

A fast-dissolving film containing levocetirizine, a non-sedative antihistamine drug, was developed using pullulan, xanthan gum, propylene glycol, and tween 80 as the base materials. The drug content of the prepared films was within an acceptable limit as prescribed by the USP. The film exhibited excellent stability for four months when stored at 40 °C and 75% humidity. In vitro dissolution studies suggested a rapid disintegration, in which most of levocetirizine (93.54 ± 3.9%) dissolved within 90 seconds after insertion into the medium. Subsequently, Sprague–Dawley rats were used to compare the pharmacokinetic properties of the film preparation administered to the oral cavity, to those with oral administration of the pure drug solution. The pharmacokinetic parameters were similar between the two groups in which AUC_0–t (ng h/ml), AUC_0–∞ (ng h/ml) C_max (ng/ml), T_max (min), K_el (h⁻¹), and t_1/2 (h) of the reference were 452.033 ± 43.68, 465.78 ± 48.16, 237.16 ± 19.87, 30, 0.453 ± 0.051, and 1.536 ± 0.118, respectively, for the film formulation 447.233 ± 46.24, 458.22 ± 46.74, 233.32 ± 17.19, 30, 0.464 ± 0.060, and 1.496 ± 0.293, respectively. These results suggest that the present levocetirizine containing fast-dissolving film is likely to become one of the choices to treat different allergic conditions.     

A validated stability-indicating LC method for estimation of etoposide in bulk and optimized self-nano emulsifying formulation: Kinetics and stability effects

The present investigation was aimed to establish a validated stability-indicating liquid chromatographic method for the estimation of etoposide (ETP) in bulk drug and self-nano emulsifying formulation. ETP was successfully separated from the degradation products formed under stress conditions on LiChrospher 100 C₁₈ reverse-phase column (a 250 mm × 4.6 mm i.d., 5-μm particle size) using 55:45 (v/v) acetonitrile–phosphate buffer saline (pH 4.5) as the mobile phase, at a flow rate of 1.0 mL min⁻¹ and detection at 283 nm. The response was a linear function of analyte concentration (R² > 0.9997) over the concentration range of 0.05–50 μg mL⁻¹. The method was validated for precision, accuracy, robustness, sensitivity and specificity. The % recovery of ETP at three different levels (50%, 100% and 150%) ranged between 93.84% and 100.06% in optimized self-nano emulsifying formulation, Etosid® soft-gelatin capsule and Fytosid® injection. First-order degradation kinetics of ETP were observed under acidic and alkaline conditions. The method was also applied for the stability assessment of self-nano emulsifying formulation under accelerated conditions, the formulation was found to be stable at all storage conditions with the shelf-life of 2.37 years at 25 °C. The method holds promise for routine quality control of ETP in bulk, pharmaceutical formulations as well as in stability-indicating studies.     

Validated High Performance Thin Layer Chromatographic Determination and Content Uniformity Test for Rosiglitazone in Tablets

A simple, rapid, precise and economical high performance thin layer chromatographic method has been developed and validated for determination of rosiglitazone in its tablet dosage form using caffeine as an internal standard. It was performed on silica gel 60 GF₂₅₄ thin layer chromatographic plates as a stationary phase using mobile phase methanol:toluene:chloroform:triethylamine (1:8:0.5:0.5 v/v/v/v) and the detection was carried out in the absorbance mode at 264 nm showing R_f value 0.31 for rosiglitazone and 0.52 for caffeine. The linear regression data curve shows good linear relationship in the concentration range 1.0-7.0 µg/µl. The content uniformity test was carried out as per USP specification of the content uniformity test of 85-115%. The percent drug estimated of rosiglitazone from two different marketed formulations were found to be in the range 99.83-100.21. The recovery of drugs was carried out by standard addition method were found to be 100.21±1.06 and 100.04±0.30 by height and area respectively. The method was validated with the determination of accuracy, precision, specificity, linearity detector response and ruggedness. The proposed method provides a faster and cost effective quality control tool for routine analysis of content uniformity test for rosiglitazone in tablet formulation.     

RP-HPLC Method for Simultaneous Estimation of Nitazoxanide and Ofloxacin in Tablets

A reverse phase high performance liquid chromatography method was developed for simultaneous estimation of nitazoxanide and ofloxacin in tablet formulation. The separation and quantification was achieved by Hiq Sil C₁₈V Size 4.6 mm Ø ^*250 mm column in isocratic mode, with mobile phase consisting of acetonitrile-methanol-0.4 M citric acid, (60:30:10, v/v/v). Citric acid used to stabilize nitazoxanide and ofloxacin in mobile phase. The mobile phase was pumped at a rate of 0.6 ml/min and the detection was carried out at 304 nm. The retention time of ofloxacin and nitazoxanide was found to be 3.122 and 5.902 min, respectively. The method was validated for linearity, accuracy, and precision. Linearity for ofloxacin and nitazoxanide were in the range 2-36 μg/ml and 5-90 μg/ml, respectively. The developed method was found to be accurate, precise and selective for simultaneous estimation of ofloxacin and nitazoxanide in tablets.     

Method Development and Validation of a Stability-Indicating RP-HPLC Method for the Quantitative Analysis of Dronedarone Hydrochloride in Pharmaceutical Tablets

A simple, precise, and accurate HPLC method has been developed and validated for the quantitative analysis of Dronedarone Hydrochloride in tablet form. An isocratic separation was achieved using a Waters Symmetry C₈ (100 × 4.6 mm), 5 μm particle size column with a flow rate of 1 ml/min and UV detector at 290 nm. The mobile phase consisted of buffer: methanol (40:60 v/v) (buffer: 50 mM KH₂PO₄ + 1 ml triethylamine in 1 liter water, pH=2.5 adjusted with ortho-phosphoric acid). The method was validated for specificity, linearity, precision, accuracy, robustness, and solution stability. The specificity of the method was determined by assessing interference from the placebo and by stress testing the drug (forced degradation). The method was linear over the concentration range 20–80 μg/ml (r² = 0.999) with a Limit of Detection (LOD) and Limit of Quantitation (LOQ) of 0.1 and 0.3 μg/ml respectively. The accuracy of the method was between 99.2–100.5%. The method was found to be robust and suitable for the quantitative analysis of Dronedarone Hydrochloride in a tablet formulation. Degradation products resulting from the stress studies did not interfere with the detection of Dronedarone Hydrochloride so the assay is thus stability-indicating.     

Application of HPLC for the simultaneous determination of aceclofenac, paracetamol and tramadol hydrochloride in pharmaceutical dosage form

A simple, precise and accurate reversed-phase liquid chromatographic method has been developed for the simultaneous estimation of aceclofenac (ACF), paracetamol (PCM) and tramadol hydrochloride (TRM) in pharmaceutical dosage form. The chromatographic separation was achieved on a HiQ-Sil™ HS C18 column (250×4.6 mm i.d., 5 μm particle size), kromatek analytical column at ambient temperature. The mobile phase consisted of 40: 60 (v/v); phosphate buffer (pH 6.0): methanol. The flow rate was set to 1.0 mL min⁻¹ and UV detection was carried out at 270 nm. The retention time (t_R) for ACF, PCM and TRM were found to be 14.567 ± 0.02, 3.133 ± 0.01 and 7.858 ± 0.02 min, respectively. The validation of the proposed method was carried out for linearity, precision, robustness, limit of detection, limit of quantitation, speci city, accuracy and system suitability. The linear dynamic ranges were from 40–160 μg mL⁻¹ for ACF, 130–520 μg mL⁻¹ for PCM and 15–60 μg mL⁻¹ for TRM. The developed method can be used for routine quality control analysis of titled drugs in pharmaceutical dosage form.     

A validated capillary electrophoresis method for simultaneous determination of ezetimibe and atorvastatin in pharmaceutical formulations

A simple, precise, and sensitive capillary electrophoresis technique coupled with a diode array detector has been developed for the separation and simultaneous determination of ezetimibe and atorvastatin in pharmaceutical formulations. Separation of both ezetimibe and atorvastatin was achieved utilizing fused silica capillary (58 cm × 75 μm ID) and background electrolyte solution that consisted of phosphate buffer (2.5 mM, pH 6.7): methanol (70:30 v/v). The proposed method was validated by testing its specificity, linearity, precision, accuracy, recovery, and detection limit/quantitation limit values. The method was linear over the range 2.5–50 μg/ml for ezetimibe (r = 0.9992) and 1–100 μg/ml for atorvastatin (r = 0.9999). Within-day and between-day RSD for ezetimibe and atorvastatin were ⩽5.6% and ⩽2.9%, respectively. The detection limit was 0.07 μg/ml for ezetimibe and 0.06 μg/ml for atorvastatin. The validated method was successfully employed for the determination of ezetimibe and atorvastatin in tablets with no interfering peaks from common pharmaceutical excipients. The percentage recoveries of the two drugs from their tablets were 99.80 ± 1.76 and 100.19 ± 1.83, respectively.     

Pharmacokinetics and pharmacodynamics of nasally delivered midazolam

AIMS

To investigate the pharmacokinetics and pharmacodynamics of nasal formulations containing midazolam (5–30 mg ml⁻¹) complexed with cyclodextrin.

METHODS

An open-label sequential trial was conducted in eight healthy subjects receiving single doses of 1 mg and 3 mg intranasally and 1 mg midazolam intravenously. Pharmacokinetic parameters were obtained by non-compartmental and two-compartmental models. Pharmacodynamic effects of midazolam were assessed using VAS and a reaction time test.

RESULTS

Mean bioavailability of midazolam after nasal administration ranged from 76 ± 12% to 92 ± 15%. With formulations delivering 1 mg midazolam, mean C_max values between 28.1 ± 9.1 and 30.1 ± 6.6 ng ml⁻¹ were reached after 9.4 ± 3.2–11.3 ± 4.4 min. With formulations delivering 3 mg midazolam, mean C_max values were between 68.9 ± 19.8 and 80.6 ± 15.2 ng ml⁻¹ after 7.2 ± 0.7–13.0 ± 4.3 min. Chitosan significantly increased C_max and reduced t_max of midazolam in the high-dose formulation. Mean ratios of dose-adjusted AUC after intranasal and intravenous application for 1′-hydroxymidazolam were between 0.97 ± 0.15 and 1.06 ± 0.24, excluding relevant gastrointestinal absorption of intranasal midazolam. The pharmacodynamic effects after the low-dose nasal formulations were comparable with those after 1 mg intravenous midazolam. The maximum increase in reaction time by the chitosan-containing formulation delivering 3 mg midazolam was greater compared with 1 mg midazolam i.v. (95 ± 78 ms and 19 ± 22 ms, mean difference 75.5 ms, 95% CI 15.5, 135.5, P < 0.01). Intranasal midazolam was well tolerated but caused reversible irritation of the nasal mucosa.

CONCLUSIONS

Effective midazolam serum concentrations were reached within less than 10 min after nasal application of a highly concentrated midazolam formulation containing an equimolar amount of the solubilizer RMβCD combined with the absorption enhancer chitosan.     

A Stability-Indicating High Performance Liquid Chromatographic Method for the Determination of Diacerein in Capsules

A stability-indicating HPLC method was developed and validated for the quantitative determination of diacerein in capsule dosage forms. An isocratic separation was achieved using a perfectsil target ODS-3, 250×4.6 mm i.d., 5 µm particle size columns with a flow rate of 1 ml/min and using a UV detector to monitor the eluate at 254 nm. The mobile phase consisted of phosphate buffer:acetonitrile (40:60, v/v) with pH 4.0 adjusted with phosphoric acid. The drug was subjected to oxidation, hydrolysis, photolysis and thermal degradation. Diacerein was found to degrade in acidic, basic, and oxidative stress and also under neutral condition. Complete separation of degraded products was achieved from the parent compound. All degradation products in an overall analytical run time of approximately 10 min with the parent compound diacerein eluting at approximately 4.9 min. The method was linear over the concentration range of 1-10 µg/ml (r² = 0.9996) with a limit of detection and quantitation of 0.01 and 0.05 µg/ml respectively. The method has the requisite accuracy, selectivity, sensitivity, precision and robustness to assay diacerein in capsules. Degradation products resulting from the stress studies did not interfere with the detection of diacerein and the assay is thus stability-indicating.     

Simultaneous Estimation of Nebivolol Hydrochloride and Valsartan using RP HPLC

In this study, a rapid, precise, accurate, specific and sensitive ion-paired reverse phase liquid chromatographic method has been developed for the simultaneous estimation of nebivolol hydrochloride and valsartan in their capsule formulation. The chromatographic method was standardized using a HIQ sil C₁₈ column (250×4.6 mm i.d., 5 μm particle size) with UV detection at 289 nm and flow rate of 1 ml/min. The mobile phase consisting of methanol:water (80:20 v/v) with addition of 0.1 percent 1-hexanesulfonic acid monohydrate sodium salt as an ion-pairing reagent was selected. The method was validated and produced accurate and precise results for estimation of the two drugs.     

Box-Behnken supported validation of stability-indicating high performance thin-layer chromatography (HPTLC) method: An application in degradation kinetic profiling of ropinirole

Stability-indicating high-performance thin-layer chromatographic (HPTLC) method for the analysis of ropinirole HCl was developed and validated as per the ICH guidelines. The method employed the mobile phase and toluene-ethyl acetate-6 M ammonia solution (5:6:0.5, v/v/v) was optimized with the help of a design expert. Densitometric analysis of ropinirole HCl was carried out in the absorbance mode at 250 and 254 nm. Compact spots for ropinirole HCl were found at R_f value of 0.58 ± 0.02. The linear regression analysis data for the calibration plots showed R² = 0.9989 ± 0.0053 with a concentration range of 100–3000 ng spot⁻¹. The method was validated for precision, accuracy, ruggedness, robustness, specificity, recovery, limit of detection (LOD) and limit of quantitation (LOQ). The LOD and LOQ were 12.95 and 39.25 ng spot⁻¹ respectively. Drug was subjected to acidic, alkaline, oxidative, dry heat, wet heat and photo degradation stress. All the peaks of degradation products were well resolved from the standard drug peak with significant difference of R_f. The acidic and alkaline stress degradation kinetics of ropinirole, were found to be in first order, showing high stability (t_1/2, 146.37 h⁻¹; t_0.9, 39.11 h⁻¹) in the acidic medium and low stability (t_1/2, 97.67 h⁻¹; t_0.9, 14.87 h⁻¹) in the alkaline environment.     

Development and Validation of a HPTLC Method for Simultaneous Quantitation of Flunarizine Dihydrochloride and Propranolol Hydrochloride in Capsule Dosage Form

A simple, precise, accurate, and rapid high-performance thin layer chromatographic method has been developed and validated for the simultaneous quantitation of flunarizine dihydrochloride and propranolol hydrochloride in a combined capsule dosage form. The method was carried out on precoated silica gel 60 F₂₅₄ TLC aluminum plate, (20×10 cm²). The solvent system was ethyl acetate:methanol:glacial acetic acid in the proportion of 8:1:1, (v/v/v). R_f value for flunarizine dihydrochloride and propranolol hydrochloride was found to be 0.62±0.02 and 0.18±0.02, respectively. The linearity regression analysis for calibration showed 0.999 and 0.999 for flunarizine dihydrochloride and propranolol hydrochloride with respect to peak area and height in the concentration range of 50-350 ng/spot and 500-3500 ng/spot, respectively. Accuracy of recovery studies was found to be 98-100.28 and 99.11-99.45% for flunarizine dihydrochloride and propranolol hydrochloride, respectively. The amounts of drug in marketed formulation were 100.5 and 101.25% of flunarizine dihydrochloride and propranolol hydrochloride, respectively. The method developed can be used for routine analysis in bulk drug and capsule dosage form.     

Stability-indicating Simultaneous HPTLC Method for Olanzapine and Fluoxetine in Combined Tablet Dosage Form

A rapid, selective and stability-indicating high performance thin layer chromatographic method was developed and validated for the simultaneous estimation of olanzapine and fluoxetine in combined tablet dosage form. Olanzapine and fluoxetine were chromatographed on silica gel 60 F₂₅₄ TLC plate using methanol:toluene (4:2 v/v) as the mobile phase and spectrodensitometric scanning-integration was performed at a wavelength of 233 nm using a Camag TLC Scanner III. This system was found to give compact spots for both olanzapine (R_f value of 0.63±0.01) and fluoxetine (R_f value of 0.31±0.01). The polynomial regression data for the calibration plots showed good linear relationship with r²=0.9995 in the concentration range of 100-800 ng/spot for olanzapine and 1000-8000 ng/spot for fluoxetine with r²=0.9991. The method was validated in terms of linearity, accuracy, precision, recovery and specificity. The limit of detection and the limit of quantification for the olanzapine were found to be 30 and 100 ng/spot, respectively and for fluoxetine 300 and 1000 ng/spot, respectively. Olanzapine and fluoxetine were degraded under acidic, basic and oxidation degradation conditions which showed all the peaks of degraded product were well resolved from the active pharmaceutical ingredient. Both drugs were not further degraded after thermal and photochemical degradation. The method was found to be reproducible and selective for the simultaneous estimation of olanzapine and fluoxetine. As the method could effectively separate the drugs from their degradation products, it can be employed as a stability-indicating method.     

Development and Validation of a Reversed-Phase High-performance Liquid Chromatography Method for Determination of Desmopressin in Chitosan Nanoparticles

A simple isocratic reversed-phase high performance liquid chromatographic method was developed for determination of released desmopressin from chitosan nanoparticles in the in vitro media. The chromatographic separation was achieved with acetonitrile/water (25:75, v/v), in which water contained 0.1% v/v trifluoroacetic acid with pH=2.5 as mobile phase, a Chromolith^® Performance RP-18e column (150×4.6 mm; 5 μm) kept at 40° and ultraviolet detection at 220 nm. The compound was eluted isocritically at a constant flow rate of 1.6 ml/min. The method was validated according to the International Conference on Harmonisation guidelines. The validation characteristics included accuracy, precision, linearity rang, selectivity, limit of detection, limit of quantitation and robustness. The calibration curve was linear (r>0.9999) over the concentration rang 0.5-100 μg/ml. The limit of detection and limit of quantitation in the release media were 0.05 and 0.5 μg/ml, respectively. The proposed method had an accuracy of and intra- and inter-day precision <4.2. Furthermore, to evaluate the performance of the proposed method, it was used in the analysis of desmopressin level in real samples containing chitosan nanoparticles in the in vitro media.     

Effect of centchroman coadministration on the pharmacokinetics of metformin in rats

Objectives:

To study the effect of centchroman, a non-steroidal oral contraceptive, coadministration on the pharmacokinetics of metformin in rats.

Materials and Methods:

The pharmacokinetic interaction of metformin was studied in normal Sprague-Dawley female rats with and without centchroman coadministration. Blood samples were analyzed using a validated high-performance liquid chromatography method to generate the pharmacokinetic profile of metformin. The C_max and t_max were directly read from the concentration–time data. Other pharmacokinetic parameters were estimated using non-compartmental analyses.

Results:

Metformin was monitored up to 10 h, and it exhibited a double-peak phenomenon. The C_{max 1}, 2.62 ± 0.32 μg/ml, and C_{max 2,} 2.96 ± 0.65 μg/ml, occurred after 0.75 and 3 h post-dose, respectively. The mean residence time (MRT), AUC_{0-4 h} and volume of distribution (Vd/F) were 4.20 ± 0.30 h, 8.53 ± 1.89 μg.h/ml and 14.24 ± 5.42 L/kg, respectively. Following centchroman coadministration, metformin showed significantly (P < 0.05) higher C_max (C_{max 1,} 3.96 ± 0.55 μg/ml and C_{max 2,} 5.21 ± 0.59 μg/ml), AUC_{0-4 h} (12.28 ± 0.73 μg.h/ml) and Vd/F (18.29 ± 1.19 L/kg), but lower MRT (3.19 ± 0.36 h) than the values obtained after metformin dosing alone. However, AUC_0-t (17.74 ± 5.58 μg.h/ml) and clearance (3.76 ± 0.80 L/h/kg) remained unchanged.

Conclusions:

The results indicate that centchroman coadministration increases the rate but not the extent of absorption of metformin in rats. However, it does not seem to alter the pharmacokinetics of metformin to clinically significant levels.     

Zanamivir Oral Delivery: Enhanced Plasma and Lung Bioavailability in Rats

The objective of this study was to enhance the oral bioavailability (BA) of zanamivir (ZMR) by increasing its intestinal permeability using permeation enhancers (PE). Four different classes of PEs (Labrasol^®, sodium cholate, sodium caprate, hydroxypropyl β-cyclodextrin) were investigated for their ability to enhance the permeation of ZMR across Caco-2 cell monolayers. The flux and P_app of ZMR in the presence of sodium caprate (SC) was significantly higher than other PEs in comparison to control, and was selected for further investigation. All concentrations of SC (10-200 mM) demonstrated enhanced flux of ZMR in comparison to control. The highest flux (13 folds higher than control) was achieved for the formulation with highest SC concentration (200 mM). The relative BA of ZMR formulation containing SC (PO-SC) in plasma at a dose of 10 mg/kg following oral administration in rats was 317.65% in comparison to control formulation (PO-C). Besides, the AUC_{0-24 h} of ZMR in the lungs following oral administration of PO-SC was 125.22 ± 27.25 ng hr ml^-1 with a C_max of 156.00 ± 24.00 ng/ml reached at 0.50±0.00 h. But, there was no ZMR detected in the lungs following administration of control formulation (PO-C). The findings of this study indicated that the oral formulation PO-SC containing ZMR and SC was able to enhance the BA of ZMR in plasma to an appropriate amount that would make ZMR available in lungs at a concentration higher (>10 ng/ml) than the IC₅₀ concentration of influenza virus (0.64-7.9 ng/ml) to exert its therapeutic effect.     

Evaluation of Bioequivalence of Two Oral Formulations of Olanzapine

Olanzapine is an atypical antipsychotic drug, used for the management of schizophrenia and for the treatment of moderate to severe mania associated with bipolar disorder. The objective of the present randomised, crossover study was to compare the bioavailability of olanzapine 10 mg/5 ml powder for oral suspension with olanzapine 10 mg orally disintegrating tablet. Eighteen healthy male volunteers were randomly assigned to crossover, single-dose treatment regimens. Serial blood samples were collected, and plasma concentrations of olanzapine were analysed using the LC-MS/MS technique. Pharmacokinetic parameters and bioequivalence limits were calculated using non-compartmental methods. Average C_max following administration of the single 10 mg disintegrating tablet formulation and 10 mg/5 ml suspension were 14.47±4.25 ng/ml and 13.56±3.99 ng/ml respectively. Corresponding median T_max were 5.0 h and 6.0 h, respectively. The average AUC_0–t values and AUC_0–inf values were similar following each of the olanzapine preparations. Overall, the 90% Confidence Interval for the intra-individual ratios of the log-transformed C_max and AUC values of the two formulations were within the bioequivalence interval of 80–125%. The study has demonstrated the bioequivalence of the 10 mg tablet and the 10 mg/5 ml oral suspension of olanzapine.     

Ion-Pairing Reverse-Phase High Performance Liquid Chromatography Method for Simultaneous Estimation of Atenolol and Indapamide in Bulk and Combined Dosage Form

A sensitive, accurate, precise and validated ion-pairing reverse-phase liquid chromatographic method for the quantitative determination of atenolol and indapamide in bulk and tablet dosage form was developed. The proposed ion-pairing reverse-phase high performance liquid chromatography method utilises C₁₈ column with 5 μm, 150×4.6 mm i.d. column and mobile phase consisting of 0.1% w/v solution of octane sulphonic acid, sodium salt and methanol (55:45 v/v), (pH 2.8) and ultraviolet detection at 235 nm. A linearity range of 1-250 μg/ml and 1-25 μg/ml for atenolol and indapamide, respectively, was obtained. The mean recoveries are 100.48 and 99.82% for atenolol and indapamide, respectively. The method was validated as per International Conference on Harmonization guidelines.