Fly Ash as an Eco-Friendly Filler for Rigid Polyurethane Foams Modification

There is currently a growing demand for more effective thermal insulation materials with the best performance properties. This research paper presents the investigation results on the influence of two types of filler on the structure and properties of rigid polyurethane foam composites. Fly ash as a product of coal combustion in power plants and microspheres of 5, 10, 15, and 20 wt.%, were used as rigid polyurethane foams modifiers. The results of thermal analysis, mechanical properties testing, and cellular structure investigation performed for polyurethane composites show that the addition of fly ash, up to 10 wt.%, significantly improved the majority of the tested parameters. The use of up to 20 wt.% of microspheres improves the mechanical and thermal properties and thermal stability of rigid polyurethane foams.     

The Influence of Cement Substitution by Biomass Fly Ash on the Polymer–Cement Composites Properties

The generation of energy for the needs of the population is currently a problem. In consideration of that, the biomass combustion process has started to be implemented as a new source of energy. The dynamic increase in the use of biomass for energy generation also resulted in the formation of waste in the form of fly ash. This paper presents an efficient way to manage this troublesome material in the polymer–cement composites (PCC), which have investigated to a lesser extent. The research outlined in this article consists of the characterization of biomass fly ash (BFA) as well as PCC containing this waste. The characteristics of PCC with BFA after 3, 7, 14, and 28 days of curing were analyzed. Our main findings are that biomass fly ash is suitable as a mineral additive in polymer–cement composites. The most interesting result is that the addition of biomass fly ash did not affect the rheological properties of the polymer–cement mortars, but it especially influenced its compressive strength. Most importantly, our findings can help prevent this byproduct from being placed in landfills, prevent the mining of new raw materials, and promote the manufacture of durable building materials.     

Granite Powder vs. Fly Ash for the Sustainable Production of Air-Cured Cementitious Mortars

The partial replacement of cement in concrete with the addition of granite powder and fly ash can help to reduce the carbon dioxide (CO₂) emissions into the atmosphere associated with cement production. The aim of the article is to compare the performance of granite powder and fly ash for the sustainable production of air-cured cementitious mortars. The morphological, chemical, and granulometric properties of these additives were first compared with the properties of cement. Afterward, a series of mortars modified with the addition of granite powder and fly ash was made. The properties of the fresh mixes and the mechanical properties of the hardened composites were then tested. Finally, based on the obtained results, a cost analysis of the profitability of modifying cementitious composites with granite powder or fly ash was investigated. The obtained results allow similarities and differences between granite powder and fly ash in relation to cement to be shown. To conclude, it should be stated that both of these materials can successfully be used for the sustainable production of air-cured cementitious composites. This conclusion has a significant impact on the possibility of improving the natural environment by reducing the amount of cement production. More sustainable production of cement-based materials could enable CO₂ emissions to be decreased. The use of granite powder for the production of cementitious mortars can significantly reduce the amount of this material deposited in landfills.     

Fly Ash with Ammonia: Properties and Emission of Ammonia from Cement Composites

The article presents the results of tests performed on fly ash with a high content of ammonium (up to 400 ppm) from the NOx reduction process. The main properties of fly ash were tested according to EN 450-1 and the results were compared with fly ash without ammonium. The comparison showed that fly ash with high concentration of ammonium suits the requirements of the European standard. Although the requirements do not limit the ammonium content, using such material as an additive for cement composites causes the emission of gaseous ammonium during mixing and from the final product. For this reason, the emission of ammonium from mortars containing fly ash were tested. The results have shown that using high ammonium fly ash might pollute indoor air and affect the health of users.     

Freeze–Thaw Resistance and Air-Void Analysis of Concrete with Recycled Glass–Pozzolan Using X-ray Micro-Tomography

Recent studies have shown promising potential for using Glass Pozzolan (GP) as an alternative supplementary cementitious material (SCM) due to the scarcity of fly ash and slag in the United States. However, comprehensive studies on the freeze–thaw (FT) resistance and air void system of mixtures containing GP are lacking. Therefore, this study aimed to evaluate GP’s effect on FT resistance and characterize mixtures with different GP contents, both macro- and microscopically. In this study, six concrete mixes were considered: Three mixes with 20%, 30% and 40% GP as cement replacements and two other comparable mixes with 30% fly ash and 40% slag, as well as a mix with 100% Ordinary Portland cement (OPC) as a reference. Concrete samples were prepared, cured and tested according to the ASTM standards for accelerated FT resistance for 1000 cycles and corresponding dynamic modulus of elasticity (Ed). All the samples showed minimal deterioration and scaling and high F/T resistance with a durability factor of over 90%. The relationships among FT resistance parameters, air-pressured method measurements of fresh concretes and air void analysis parameters of hardened concretes were examined in this study. X-ray micro-tomography (micro-CT scan) was used to evaluate micro-cracks development after 1000 freeze–thaw cycles and to determine spatial parameters of air voids in the concretes. Pore structure properties obtained from mercury intrusion porosimetry (MIP) and N₂ adsorption method showed refined pore structure for higher cement replacement with GP, indicating more gel formation (C-S-H) which was verified by thermogravimetric analysis (TGA).     

The Impact of Graphene and Diatomite Admixtures on the Performance and Properties of High-Performance Magnesium Oxychloride Cement Composites

A high-performance magnesium oxychloride cement (MOC) composite composed of silica sand, diatomite powder, and doped with graphene nanoplatelets was prepared and characterized. Diatomite was used as a 10 vol.% replacement for silica sand. The dosage of graphene was 0.5 wt.% of the sum of the MgO and MgCl₂·6H₂O masses. The broad product characterization included high-resolution transmission electron microscopy, X-ray diffraction, X-ray fluorescence, scanning electron microscopy and energy dispersive spectroscopy analyses. The macrostructural parameters, pore size distribution, mechanical resistance, stiffness, hygric and thermal parameters of the composites matured for 28-days were also the subject of investigation. The combination of diatomite and graphene nanoplatelets greatly reduced the porosity and average pore size in comparison with the reference material composed of MOC and silica sand. In the developed composites, well stable and mechanically resistant phase 5 was the only precipitated compound. Therefore, the developed composite shows high compactness, strength, and low water imbibition which ensure high application potential of this novel type of material in the construction industry.     

Influence of Potassium-Based Alkaline Electrolyzed Water on Hydration Process and the Properties of Cement-Based Materials with Fly Ash

Alkaline electrolyzed water, a kind of clean green water with excellent characteristics such as high activity, strong alkalinity, high ion penetrating ability, electrical charge, and good molecule adsorption, was significant to the resource utilization of industrial fly ash waste. This paper studies highly active potassium-based alkaline electrolyzed water’s impact, compared with ordinary water, on the cement hydration process using microstructural methods such as a hydration heat test, differential thermal analysis, X-ray diffraction (XRD) pattern, and Scanning electron microscope (SEM) image analysis. Fly ash cement-based materials were first prepared with alkaline electrolyzed water as the mixing water. The alkaline electrolyzed water’s influence on fly ash paste workability and the mechanical properties of fly ash mortar for varying fly ash proportions were ratified. Then alkaline electrolyzed water with the best pH value was selected to prepare fly ash concrete, and its durability was studied. The test results showed that it is feasible to increase the utilization rate of fly ash by using alkaline electrolyzed water. Furthermore, it promoted the process of cement hydration, increased the rate of the hydration reaction, and the promotion effect increased with the increase in pH value of the alkaline electrolyzed water, and also promoted the effective decomposition of the vitreous shell of fly ash to stimulate its early activity. Concurrent tests with ordinary water paste showed that the water requirement for normal consistency and setting time with alkaline electrolyzed water paste were significantly less. Alkaline electrolyzed water also solved the problem related to the low early strength of fly ash mortar. Furthermore, using alkaline electrolyzed water with an optimum pH value of 11.5 to prepare fly ash concrete effectively reduced concrete’s carbonation depth and carbonation rate and lessened the chloride ion migration coefficient.     

Recyclability of Concrete Pavement Incorporating High Volume of Fly Ash

Recyclable concrete pavement was made from fly ash and crushed limestone sand and gravel as aggregates so that the concrete pavement could be recycled to raw materials for cement production. With the aim to use as much fly ash as possible for the sustainable development of society, while achieving adequate strength development, pavement concrete having a cement-replacement ratio of 40% by mass was experimentally investigated, focusing on the strength development at an early age. Limestone powder was added to improve the early strength; flexural strength at two days reached 3.5 MPa, the minimum strength for traffic service in Japan. The matured fly ash concrete made with a cement content of 200 kg/m³ achieved a flexural strength almost equal to that of the control concrete without fly ash. Additionally, Portland cement made from the tested fly ash concrete was tested to confirm recyclability, with the cement quality meeting the Japanese classification of ordinary Portland cement. Limestone-based recyclable fly ash concrete pavement is, thus, a preferred material in terms of sustainability.     

Experimental Investigation on Pore Structure Characterization of Concrete Exposed to Water and Chlorides

In this paper, the pore structure characterization of concrete exposed to deionised water and 5% NaCl solution was evaluated using mercury intrusion porosity (MIP), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The effects of calcium leaching, fly ash incorporation, and chloride ions on the evolution of pore structure characteristics were investigated. The results demonstrate that: (i) in ordinary concrete without any fly ash, the leaching effect of the cement products is more evident than the cement hydration effect. From the experimental data, Ca(OH)₂ is leached considerably with the increase in immersion time. The pore structure of concrete can also be affected by the formation of an oriented structure of water in concrete materials; (ii) incorporation of fly ash makes a difference for the performance of concrete submersed in solutions as the total porosity and the pore connectivity can be lower. Especially when the dosage of fly ash is up to 30%, the pores with the diameter of larger than 100 nm show significant decrease. It demonstrates that the pore properties are improved by fly ash, which enhances the resistance against the calcium leaching; (iii) chlorides have a significant impact on microstructure of concrete materials because of the chemical interactions between the chlorides and cement hydrates.     

Influence of Particle Morphology of Ground Fly Ash on the Fluidity and Strength of Cement Paste

The grinding process has become widely used to improve the fineness and performance of fly ash. However, most studies focus on the particle size distribution of ground fly ash, while the particle morphology is also an important factor to affect the performance of cement paste. This article aims at three different kinds of ground fly ash from the ball mill and vertical mill, and the particle morphology is observed by scanning electron microscopy (SEM) to calculate the spherical destruction (the ratio of spherical particles broken into irregular particles in the grinding process of fly ash), which provides a quantification of the morphology change in the grinding process. The fluidity of cement paste and the strength of cement mortar are tested to study the relation of spherical destruction and fluidity and strength. The results show that the spherical destruction of ground fly ash in a ball mill is more than 80% and that in a vertical mill with a separation system is only 11.9%. Spherical destruction shows a significant relation with the fluidity. To different addition of ground fly ash, the fluidity of cement paste decreases with the increase of spherical destruction. To the strength of cement paste, particle size distribution and spherical destruction are both the key factors. Therefore, spherical destruction is an important measurement index to evaluate the grinding effect of the fly ash mill.     

Durability of Mortars with Fly Ash Subject to Freezing and Thawing Cycles and Sulfate Attack

Destruction of cement composites occurs due to the alternate or simultaneous effects of aggressive media, resulting in the destruction of concrete under the influence of chemical and physical factors. This article presents the results of changes in the measurement of linear strains of samples and changes in the microstructure of cement after 30 freezing and thawing cycles and immersed in 5% sodium sulfate solution. The compressive strengths ratios were carried out at the moment when the samples were moved to the sulfate solution after 30 cycles and at the end of the study when the samples showed visual signs of damage caused by the effect of 5% Na₂SO₄. The composition of the mixtures was selected based on the Gibbs triangle covering the area up to 40% replacement of Portland cement with low and high-calcium fly ashes or their mixture. Air-entrained and non-air entrained mortars were made of OPC, in which 20%, 26.6%, and 40% of Portland cement were replaced with low and/or high-calcium fly ash. Initial, freezing and thawing cycles accelerated the destruction of non- air-entrained cement mortars immersed in 5% sodium sulfate solution. The sulfate resistance, after the preceding frost damage, decreased along with the increase in the amount of replaced fly ash in the binder. Air-entrained mortars in which 20% of cement was replaced with high-calcium fly ash showed the best resistance to the action of sodium sulfate after 30 freezing and thawing cycles.     

Hydration Processes of Four-Component Binders Containing a Low Amount of Cement

Results of research on hydration of four-component binders containing very high amounts of supplementary cementitious materials were presented. The samples were composed of blended pozzolana (a mix of conventional fly ash and spent aluminosilicate catalyst), cement (about 20 wt.% in the binder) and Ca(OH)₂. Spent aluminosilicate catalyst was proposed as activating component which can improve properties of low-cement blends, while the role of Ca(OH)₂ was to enhance pozzolanic reaction. Early and later hydration periods of such blends were investigated by calorimetry, TG/DTG, FTIR and X-ray diffraction. Initial setting time as well as compressive strength were also determined. It was concluded that enhancement of reactivity and improvement of properties of fly ash–cement binders are possible by replacing a part of fly ash with more active fine-grained pozzolana and introducing additional amounts of Ca(OH)₂. The spent catalyst is mainly responsible for accelerating action during the first hours of hydration and for progress of early pozzolanic reaction. Fly ash develops its activity over time, thus synergic effect influences the later properties of composites. Samples containing blended pozzolana exhibit shorter initial setting times and higher compressive strength, as well as faster consumption of Ca(OH)₂ compared to the reference. Investigated mixtures seem to be promising as “green” binders, alternatives to cement, after optimizing their compositions or additional activating procedure.     

Use of Isothermal and Isoperibolic Calorimetry to Study the Effect of Zinc on Hydration of Cement Blended with Fly Ash

Increasing utilization of secondary raw materials and alternative fuels results in increasing contents of metals in cements. Zinc is one of these elements. It comes to cement with secondary raw materials such as slag or fly ash or by the utilization of used tires as an alternative fuel. Zinc ions significantly prolong the hydration process in cement. This work deals with the influence of zinc ions in the form of very poorly soluble ZnO salt and easily soluble ZnCl₂ and Zn(NO₃)₂ on the hydration of cement blended with fly ash. Zinc was dosed in the range of 0.05%, 0.1%, 0.5% and 1% of cement weight. The effect of zinc on hydration was monitored by isothermal and isoperibolic calorimetry. A 15% addition of fly ash to cement mainly causes further retardation of hydration reactions due to the reactions of fly ash particles with Ca²⁺ ions from cement. The strongest effect on the hydration retardation from all investigated compounds showed in ZnO as it dissolves very slowly. On the contrary, for the dosage of 1% of zinc in the form of ZnCl₂ significant acceleration of hydration occurred. In this work, a synergistic effect on the prolongation of hydration with a combination of cement, zinc and fly ash was demonstrated. The lengths of induction periods were assessed from detected calorimetric curves and from these lengths the curves were gained by fitting with the exponential function. Final products were next analyzed using X-ray diffraction.     

Effect of Nano-Magnesium Oxide on the Expansion Performance and Hydration Process of Cement-Based Materials

Many scholars are concerned about the effect of nano-MgO as an expansion agent on the performance of cement-based materials at an early age, but over a long period less attention is paid to expansion stability and mechanical properties. This article examines the influence of nano-MgO on the long-term consistency, fluidity, expansion stability, hydration, and mechanical properties of 30% fly ash cement-based materials and improves research into nano-MgO as an expansion agent. Expansion performance, flexural and compressive strength, and stability after boiling and autoclave treatment were tested for specimens mixed with a 2, 4, 6, 8 and 10% cementitious material mass of nano-MgO. X-ray diffraction (XRD) and scanning electronic microscopy (SEM) were employed to study their hydration process and microstructure. The results showed that nano-MgO had an obvious effect on the consistency, fluidity and expansion performance of cement paste. After curing in water for 365 days and autoclaving thereafter, the hydration of nano-MgO was relatively complete. The volumetric expansion pressure of the magnesium hydroxide (Mg(OH)₂) crystals and the crystallization pressure generated after their continuous precipitation were the main reasons for the expansion of the slurry. Nano-MgO improved the microstructure of cement paste and significantly enhanced its long-term flexural strength and compressive strength. When the content of nano-MgO was less than 10%, the cement with 30% fly ash had good long-term stability with the potential to compensate for the shrinkage of large-volume concrete.     

Influence of Heat Treatment and Reinforcements on Tensile Characteristics of Aluminium AA 5083/Silicon Carbide/Fly Ash Composites

The effect of reinforcements and thermal exposure on the tensile properties of aluminium AA 5083–silicon carbide (SiC)–fly ash composites were studied in the present work. The specimens were fabricated with varying wt.% of fly ash and silicon carbide and subjected to T6 thermal cycle conditions to enhance the properties through “precipitation hardening”. The analyses of the microstructure and the elemental distribution were carried out using scanning electron microscopic (SEM) images and energy dispersive spectroscopy (EDS). The composite specimens thus subjected to thermal treatment exhibit uniform distribution of the reinforcements, and the energy dispersive spectrum exhibit the presence of Al, Si, Mg, O elements, along with the traces of few other elements. The effects of reinforcements and heat treatment on the tensile properties were investigated through a set of scientifically designed experimental trials. From the investigations, it is observed that the tensile and yield strength increases up to 160 °C, beyond which there is a slight reduction in the tensile and yield strength with an increase in temperature (i.e., 200 °C). Additionally, the % elongation of the composites decreases substantially with the inclusion of the reinforcements and thermal exposure, leading to an increase in stiffness and elastic modulus of the specimens. The improvement in the strength and elastic modulus of the composites is attributed to a number of factors, i.e., the diffusion mechanism, composition of the reinforcements, heat treatment temperatures, and grain refinement. Further, the optimisation studies and ANN modelling validated the experimental outcomes and provided the training models for the test data with the correlation coefficients for interpolating the results for different sets of parameters, thereby facilitating the fabrication of hybrid composite components for various automotive and aerospace applications.     

Rheology of Cement Pastes with Siliceous Fly Ash and the CSH Nano-Admixture

The use of fly ash in cement composites adversely affects its mechanical properties during the first days of mixture curing. Modern technology, in the form of an admixture containing the hydrated calcium silicates, allows to accelerate the hardening and binding process of concrete. In this paper, studies on the influence of the admixture on properties of concretes with the ordinary Portland cements (OPC) containing the addition of siliceous fly ash (FA) have been carried out. As part of the experimental research, the authors conducted a series of studies for cement pastes modified with the addition of FA and the CSH nano-admixture (NA). In order to compare the mixtures, the following tests of cement pastes were carried out: the compressive and flexural strength, heat of hydration, SEM and rheological shrinkage. The mechanical parameters were tested after 4, 8, 12 and 24 h. The hydration heat test and microstructure analysis were carried out during the first 24 h of the concrete curing. All tests were carried out on the standard samples. On the basis of the heat of hydration test, much higher hydration heat was found in mixtures modified with the NA. During the shrinkage test, a positive effect of the NA was observed—the shrinkage during the first 28 days of mixture curing was lower than in the reference samples. The application of the CSH nano-admixture to cement pastes with the addition of FA has brought positive effects. Apart from a significant increase in strength in the first 24 h of mixture curing, a reduction in the rheological shrinkage was observed. The admixture can be successfully used in the ash concretes, in which a higher early strength is required.     

The Performance of Concrete Made with Secondary Products—Recycled Coarse Aggregates,Recycled Cement Mortar,and Fly Ash–Slag Mix

The properties of cement concrete using waste materials—namely, recycled cement mortar, fly ash–slag, and recycled concrete aggregate—are presented. A treatment process for waste materials is proposed. Two research experiments were conducted. In the first, concretes were made with fly ash–slag mix (FAS) and recycled cement mortar (RCM) as additions. The most favorable content of the concrete additive in the form of RCM and FAS was determined experimentally, and their influence on the physical and mechanical properties of concrete was established. For this purpose, 10 test series were carried out according to the experimental plan. In the second study, concretes containing FAS–RCM and recycled concrete aggregate (RCA) as a 30% replacement of natural aggregate (NA) were prepared. The compressive strength, frost resistance, water absorption, volume density, thermal conductivity, and microstructure were researched. The test results show that the addition of FAS–RCM and RCA can produce composites with better physical and mechanical properties compared with concrete made only of natural raw materials and cement. The detailed results show that FAS–RCM can be a valuable substitute for cement and RCA as a replacement for natural aggregates. Compared with traditional cement concretes, concretes made of FAS, RCM, and RCA are characterized by a higher compressive strength: 7% higher in the case of 30% replacement of NA by RCA with the additional use of the innovative FAS–RCM additive as 30% of the cement mass.     

Permeation Properties and Pore Structure of Surface Layer of Fly Ash Concrete

This paper presents an experimental study on the nature of permeation properties and pore structure of concrete surface layers containing fly ash. Concretes containing different dosages of fly ash as a replacement for cement (15% and 30% by weight of total cement materials, respectively) were investigated. Concrete without any fly ash added was also employed as the reference specimen. Laboratory tests were conducted to determine the surface layer properties of concrete including chloride transport, apparent water permeability and pore structure. The results demonstrate that incorporation of fly ash, for the early test period, promotes the chloride ingress at the surface layer of concrete but substituting proportions of fly ash may have little impact on it. With the process of chloride immersion, the chloride concentration at the surface layer of concrete with or without fly ash was found to be nearly the same. In addition, it is suggested that the water permeability at the concrete surface area is closely related to the fly ash contents as well as the chloride exposure time. Pore structure was characterized by means of mercury intrusion porosimetry (MIP) test and the scanning electron microscopy (SEM) images. The modification of pore structure of concrete submersed in distilled water is determined by the pozzolanic reaction of fly ash and the calcium leaching effect. The pozzolanic reaction was more dominant at the immersion time of 180 days while the calcium leaching effect became more evident after 270 days.     

Influence of the Fly Ash Material Inoculants on the Tensile and Impact Characteristics of the Aluminum AA 5083/7.5SiC Composites

The choice of suitable inoculants in the grain refinement process and subsequent enhancement of the characteristics of the composites developed is an important materials research topic, having wide scope. In this regard, the present work is aimed at finding the appropriate composition and size of fly ash as inoculants for grain refinement of the aluminum AA 5083 composites. Fly ash particles, which are by products of the combustion process in thermal power plants, contributing to the large-scale pollution and landfills can be effectively utilized as inoculants and interatomic lubricants in the composite matrix–reinforcement subspaces synthesized in the inert atmosphere using ultrasonic assisted stir casting setup. Thus, the work involves the study of the influence of percentage and size of the fly ash dispersions on the tensile and impact strength characteristics of the aluminum AA 5083/7.5SiC composites. The C type of fly ash with the particle size in the series of 40–75 µm, 76–100 µm, and 101–125 µm and weight % in the series of 0.5, 1, 1.5, 2, and 2.5 are selected for the work. The influence of fly ash as distinct material inoculants for the grain refinement has worked out well with the increase in the ultimate tensile strength, yield strength, and impact strength of the composites, with the fly ash as material inoculants up to 2 wt. % beyond which the tensile and impact characteristics decrease due to the micro coring and segregation. This is evident from the microstructural observations for the composite specimens. Moreover, the role of fly ash as material inoculants is distinctly identified with the X-Ray Diffraction (XRD) for the phase and grain growth epitaxy and the Energy Dispersive Spectroscopy (EDS) for analyzing the characteristic X-Rays of the fly ash particles as inoculant agents in the energy spectrum.